safety information - cls leds light up your world! · 2020. 11. 19. · cls luxo 3 cob # l-3-x-xx-3...
TRANSCRIPT
www.cls-led.com www.cls-led.com
CLS LUXO 3 BASIC COBCLS LUXO 3 BASIC COB
h
CeilingWall 350º 30º 10 cm 150 cm 220 gr 50.000 h 28º 37,5º 62º 1 x CoB
IP40 3000K2700K Max.700 mA
Max.10 Watt
Phasedimmable
1-10Vdimmable
DMXdimmable
7,5 cm
øDRIVEREXCLUDED
DRIVERExternal
2
Manual V2.7 - November 2020
INDEX
Index 2
Safety information 2
Content 2
Technical 3
Specifications 3
CONTENT
SAFETY INFORMATION
Always switch o� mains power of the driver before connecting or maintaining any fixtures!
Qualifiedtechnician
AmbianceMax. 40º
Do not stareinto the LED
Block access below the work
area when maintaining
the unit
Use a sourceof AC power
that complies to local electrical
codes
Make sure allconnectors are
connected properly
Don’t install ina flammableor explosive
area
Warning!Some surfaces
can be hot
Don’t modifyor install
genuine parts on this product
Installation 4
Accessories 4
Lensplate replacement 5
Wiring diagram Non dim drivers 6
Wiring diagram Mains dim drivers 8
Wiring diagram 1-10V dim drivers 9
Wiring diagram Casambi Bluetooth 10
Wiring diagram DALI dim drivers 11
Wiring diagram LDC-41 driver 12
List of symbols 13
h
CeilingWall 350º 30º 10 cm 150 cm 220 gr 50.000 h 28º 37,5º 62º 1 x CoB
IP40 3000K2700K Max.700 mA
Max.10 Watt
Phasedimmable
1-10Vdimmable
DMXdimmable
7,5 cm
øDRIVEREXCLUDED
DRIVERExternal
www.cls-led.com www.cls-led.com3 4
Ø 90 mm
Ø 75 mm
Cut-out size
- 15º / +15º
ø 90 mm
55 mm
Tools
TECHNICAL
SPECIFICATIONSLED: 1 x CoB
Available colours: 2700K & 3000K
Lenses: 28º, 37,5º, 62º
Power supply: Max. 700mA
Power consumption: Max. 10 Watt
Housing: Aluminum brushed, white coated or
black coated
Weight: 220 gr
IP value: IP40
Cable length: 150 centimeter
Swivel angle: +15º / -15º, rotate 350º
Measurements: ø 70 x 55 mm (øxh)
Ambient temperature: -10º C till +40º C
min. 100 mm ø 75mm
Suspendedceiling:100 mm spaceis required forventilation
Cut-out size
INSTALLATION
ACCESSORIES
ACCESSORIES113002 CLS LDC-41 GIII DMX LED dimmer 4 channels 0.35-1A per channel
87129900 CLS SmartConnect 2-fold junction box & shortcircuit connect.
87129901 CLS SmartConnect 2-fold junction box with 5 metre cable. 87129905
CLS SmartConnect, 6-fold junctionbox & shortcircuit connect.
87129915 CLS SmartConnect short circuit plugs (10pcs)
872010 CLS Dimmer electr. 1-10V for MT35/MTD44 LED driver
872019 CLS Dimmer Jung phase cut max. 270VA 230-240VAC
874001 CLS ND 001 non dim, 100 - 240 V, 700mA driver
874004 CLS ND 004 non dim, 198 - 264 V, 250-1050mA driver
874003 CLS ND UNI non dim driver, 220 - 240 V, 300-1050mA driver
874101 CLS MD 001 mains dim. 198-264V, 700mA driver
874104 CLS MD 004 mains dim. 198-264V, 250-700mA driver
874201 CLS VD 001, 1-10V dim, 99-264 V, 350-900mA driver
874204 CLS VD 004, 1-10V dim, 99-264 V, 350-900mA driver
874208 CLS VD 008, 1-10V dim, 99-264 V, 250-700mA driver
874301 CLS DD 001, DALI dim, 99-264 V, 250-700mA driver
874304 CLS DD 004, DALI dim, 99-264 V, 350-700mA driver
875014 CLS CD UNI driver, 230 V, Casambi Bluetooth control, 300-700mA driver
911367 CLS LDC SmartConnect block LDC to SmartConnect system
Y103001 CLS Luxo 3 Basic Cob reflector spot 28º
Y103002 CLS Luxo 3 Basic Cob reflector medium flood 37,5º
Y103003 CLS Luxo 3 Basic Cob reflector flood 62º
www.cls-led.com www.cls-led.com65
REFLECTOR REPLACEMENT
1
4
5 6
2
3
Make surethe re�ector fallsstraight over the
LED, in the 2indicated holes
Do not useany forcewhilesetting there�ector
Handle allparts with careduring the nextsteps. Make sure
not to touchthe LED!
Unscrewthe front of
the heat sinkin an upwardsfacing position
WIRING DIAGRAM NON DIM DRIVER
CLS ND 001, non dimmable, 700mA driver19 x 115 x 34 mm (hxwxd)
120 ~180 cm cable
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
120 ~ 180 cm cable
115 mm
34 mm
Always use 1 piece of Luxo 3 CoB on the CLS ND 001
CLS Luxo 3 CoB# L-3-X-XX-3
CLS ND 004
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS ND 004, non dimmable, 250-1050mA driver30 x 129,5 x 42 mm (hxwxd)
Always use 2 - 4 pcs of Luxo 3 CoB on the CLS ND 004
120 ~180 cm cable120 ~ 180 cm cable
129,5 mm
42 mm
CLS Luxo 3 CoB# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com7 8
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS ND UNI, non dimmable, 300-1050mA driver22 x 146 x 43 mm (hxwxd)
Always use 1 - 4 pcs of Luxo 3 CoB on the CLS ND UNI120 ~180 cm cable
120 ~ 180 cm cable
146 mm
43 mm
CLS ND UNI
CLS Luxo 3 CoB# L-3-X-XX-X
Always switch off mains power of the driver before connecting any fixtures!
WIRING DIAGRAM MAINS DIM DRIVER
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS MD 001, mains dimmable, 700mA driver21 x 94 x 38 mm (hxwxd)
Always use 1 piece of Luxo 3 CoB on the CLS MD 001
CLS MD 001
120 ~180 cm cable
94 mm
38 mm
CLS Dimmer Jung phase cutmax. 270VA 230-240VAC# 872019
80,5 mm (w)
80,5 mm (h)
L
N
Max. 12 pieces of MD 001 on1 CLS dimmer Jung phase-cut
CLS Luxo 3 CoB# L-3-X-XX-3
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS MD 004, mains dimmable, 250-700mA driver34 x 166 x 46 mm (hxwxd)
Always use 1 - 4 pcs of Luxo 3 CoB on the CLS MD 004 120 ~180 cm cable
CLS Dimmer Jung phase cutmax. 270VA 230-240VAC# 872019
80,5 mm (w)
80,5 mm (h)
L
N
Max. 12 pieces of MD 004 on1 CLS dimmer Jung phase-cut
CLS MD 004
46 mm
166 mm
CLS Luxo 3 CoB# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com9 10
WIRING DIAGRAM 1-10V DIM DRIVER
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoBtotal cable length is max. 10 m
CLS VD 001, 1-10V dimmable, 350-900mA driver22 x 100 x 52 mm (hxwxd)
CLS VD 001
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V # 872010
L
N
120 ~180 cm cable
* 150 cm cable
Max. 12 pieces of VD 001 on1 CLS Dimmer electr. 1-10V
Always use 1 - 2 pcs of Luxo 3 CoB on the CLS VD 001
52 mm
100 mm
CLS Luxo 3 CoB# L-3-X-XX-3
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoBtotal cable length is max. 10 m
CLS VD 004, 1-10V dimmable, 350-900mA driver21 x 103 x 67 mm (hxwxd)
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V # 872010
L
N
120 ~180 cm cable
* 150 cm cable
Max. 12 pieces of VD 004 on1 CLS Dimmer electr. 1-10V
Always use 1 - 4 pcs of Luxo 3 CoB on the CLS VD 004
CLS VD 00467 mm
103 mm
CLS Luxo 3 CoB# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
CLS VD 008, 1-10V dimmable, 250-700mA driver22 x 124 x 79 mm (hxwxd)
120 ~180 cm cable
Max. 12 pieces of VD 008 on1 CLS Dimmer electr. 1-10V
Always use 1 - 6 pcs of Luxo 3 CoB on the CLS VD 008
CLS VD 008
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoBtotal cable length is max. 10 m
0-10 V
80,5 mm (w)
80,5 mm (h)
CLS Dimmer electr. 1-10V # 872010
L
N
* 150 cm cable
79 mm
124 mm
CLS Luxo 3 CoB# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS CD UNI, Casambi Bluetooth, 350-700mA driver30 x 108 x 44 mm (hxwxd)
Always use 2 - 4 pcs of Luxo 3 CoB on the CLS CD UNI
120 ~180 cm cable120 ~ 180 cm cable
108 mm
44 mm
CLS Luxo 3 CoB# L-3-X-XX-X
CLS CD UNI
WIRING DIAGRAM CASAMBI BLUETOOTH CONTROL
www.cls-led.com www.cls-led.com11 12
WIRING DIAGRAM DALI DIM DRIVER
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoB total cable length is max. 10 m
CLS DD 001, DALI dimmable, 250-700mA driver22 x 100 x 52 mm (hxwxd)
CLS DD 001
120 ~180 cm cable
120 ~180 cm cable
* 150 cm cable
Always use 1 - 2 pcs of Luxo 3 CoB on the CLS DD 001
DA1 DA2
ControllerSupporting DALI
CLS Luxo 3 CoB# L-3-X-XX-3
52 mm
100 mm
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 CoBtotal cable length is max. 10 m
CLS DD 004, DALI dimmable, 350-700mA driver21 x 103 x 67 mm (hxwxd)
120 ~180 cm cable
* 150 cm cable
DA1 DA2
ControllerSupporting DALI
CLS DD 004
Always use 1 - 4 pcs of Luxo 3 CoB on the CLS DD 004
67 mm
103 mm
CLS Luxo 3 CoB# L-3-X-XX-3
Always switch off mains power of the driver before connecting any fixtures!
WIRING DIAGRAM LDC-41 DIMMER
CLS Luxo 3 Basic CoB# L-3-X-XX-3
Max. 4 pcs of Luxo 3 Basic CoB on each channel. Depends on the power consumption of the selected BT power supply.
Installation wire 2 x 0.5 mm2
Driver till last Luxo 3 Basic CoBtotal cable length is max. 10 m
24 VDC
CLS LDC-41 GIII DMX LED dimmer 4 channels# 113002
25 mm (w)
Make sure the LDC-41 is set to 700mA!
* 150 cm cable
CLS LDCSmartConnect Block# 911367
CH1 = Channel 1CH2 = Channel 2CH3 = Channel 3CH4 = Channel 4
CH1
CH2 CH3
CH4
CLS SmartConnect6-fold junction box# 87129905
Always switch off mains power of the driver before connecting any fixtures!
www.cls-led.com www.cls-led.com13 14
LIST OF SYMBOLS
Multiple connectionDaisychain connectivity
Installation depthIn centimeters
SwivelFixture is horizontally rotatable, indicated in degrees
SwivelFixture is vertically rotatable,indicated in degrees
Installation sizeIn centimeters
Application areaIndoor or outdoor
Application areaFloor, wall or ceiling
Protection classOne, two or three
Cable lengthMaximum cable attachedto the fixture in centimeters
LifespanOf the light source in hours
DriverInclusive or exclusiveInternal or external
PressureMaximum pressure on the fixture in kg/cm2
WeightIn grams/kilograms
CurveMinimal bending curvein centimeters
LED pitchPitch between the LEDs in millimeters
Power supplyIn VDC, VAC or milliAmpere
Power consumptionIn VA or Watt
IP valueIngress Protection classifies the degrees of protection provided against the intrusion of the product
Cutting lengthIndicated by the cutting marks
LEDsKind of LED used in the fixture
LensesAvailble lenses,indicated in degrees
Performance ZoomAdjustable beam angle
Plug & playEasy connection using the SmartConnect system
White colour temperatureIn di�erent Kelvin values;Cold white, neutral white, warm white or extra warm white
ColourAvailable colours;Amber, blue, red or green
Colour changingRGB, RGB-W, RGB-A, AWB or Tunable White
DMX inputFixture works on DMX512 protocol or Wireless DMX
Magno dimmingAccurate dimming from100 - 1% by using a magnet
Dynamic ControlDynamic Power Control orDynamic Temperature Control
Combined productCompose your own fixture
Warranty3 or 5 years warranty onthe product
Energy label
Conformité EuropéenneCE marking for free marketabilityof industrial goods within the EU
r
h
ø wd
Dimmable1-10 Volt, Phase, individual,DMX dimmable or DALI
DRIVERINCLUDED
DRIVEREXTERNAL
Retail & Food LED modulesClothing, furniture, kitchens, jewellery, shoes, bread, meat, fish andvegetables & fruit.
LightsourceEquipped with a CLS, Citizen or a Xicato LED module
Bluetooth controlledBy Casambi
PWM dimmingTraditional PWM dimming, DMX analogor DMX Hybrid dim
CLSDYNAMICCOLOUR
COB
2020 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated companies disclaim liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this manual. No part of this manual may be reproduced, in any form or by any means, without permission in writing from CLS-LED BV. Other legal information can be found in our General conditions, found on the back of your CLS-LED BV invoice, inside the CLS catalogue or on our website www.cls-led.com/General-Terms.pdf