safety data sheets · ppt-sm-sds-2019. an sds gives workers . detailed information . about the...
TRANSCRIPT
Safety Data Sheets
PPT-SM-SDS-2019
The Hazard Communication Standard (HCS) requires chemical manufacturers and importers to:Assess the chemicals they produce or import Provide hazard information to companies and workers by putting labels on containers and preparing safety data sheets (SDSs)
2
PPT-SM-SDS-2019
An SDS gives workers detailed information about the hazards of a specific material and how to control those hazards.
SDSs are divided into 16 sections of HCS-required information.
3
PPT-SM-SDS-2019
The SDS format provides a standardized format for classifying chemicals according to their health and physical hazards and specifies hazard communication elements for labeling and SDSs.
The information on an SDS must be in English, although it can be in other languages in addition to English.
4
PPT-SM-SDS-2019
Your company’s HCS Program must include procedures for having an SDS for each chemical and making them available for workers.
5
PPT-SM-SDS-2019
SDSs must be located in the area where the hazardous substances will be used and easily accessible for all workers.
All workers and contractors who could be exposed to the chemical must know where SDSs are located.
6
PPT-SM-SDS-2019
Make sure you read a chemical’s SDS before you use that chemical.
7
PPT-SM-SDS-2019
The 16 sections of the SDS include:
8
1. Identification
2. Hazard(s) Identification3. Composition/Information on
Ingredients 4. First Aid Measures
5. Firefighting Measures
6. Accidental Release
7. Handling and Storage8. Exposure Controls/Personal Protection
9. Physical and Chemical Properties
10. Stability and Reactivity
11. Toxicological Information
12. Ecological Information
13. Disposal Considerations
14. Transport Information
15. Regulatory Information
16. Other Information
PPT-SM-SDS-2019
Section 1 gives the product identifier, manufacturer, importer, or responsible party, address, phone number, emergency phone number, and the chemical’s recommended use, including any restrictions.
9
PPT-SM-SDS-2019 10
Section 2 identifies the chemical hazards and required label parts. Here you will see pictograms, signal words, hazard statements, and symbolic labels, such as the National Fire Protection Association’s (NFPA) 704 label.
PPT-SM-SDS-2019
Section 3 details a chemical’s ingredients, including any trade secrets.
11
PPT-SM-SDS-2019
Section 4 identifies the chemical’s exposure symptoms and effects, including required first aid treatment. Check this section when you need to know basic first aid for a chemical.
12
PPT-SM-SDS-2019
Section 5 identifies what hazards are created when the chemical is burning and lists proper extinguishing equipment and methods.
13
PPT-SM-SDS-2019
Section 6 lists emergency procedures, including personal protective equipment (PPE) requirements and proper containment and cleanup methods.
14
PPT-SM-SDS-2019
Section 7 lists the precautions for workers to follow for the safe handling and storage of the chemical and identifies any chemical incompatibilities. Look in this section to make sure a chemical can safely be stored near another chemical.
15
PPT-SM-SDS-2019
Section 8 lists the Occupational Safety and Health Administration’s (OSHA) permissible exposure limits (PELs), the American Conference of Governmental Industrial Hygienists’ (ACGIH) threshold limit value (TLV), and identifies appropriate engineering controls and PPE.
16
PPT-SM-SDS-2019
Section 9 details the chemical’s physical and chemical properties, such as its color, odor, flash point, and density.
17
PPT-SM-SDS-2019
Section 10 identifies the chemical’s stability and the possibility of hazardous reactions.
18
PPT-SM-SDS-2019
Section 11 identifies the chemical’s toxicity level and the different routes of exposure. This section also details any signs and symptoms of exposure, including any acute or chronic effects.
19
PPT-SM-SDS-2019
Section 12 provides information to assess the environmental impact of the chemical if it were released into the environment.
20
PPT-SM-SDS-2019
Section 13 provides guidance for proper disposal, recycling, and reclamation practices.
21
PPT-SM-SDS-2019
Section 14 provides guidance on classification information for shipping and transporting the chemical.
22
PPT-SM-SDS-2019
Section 15 identifies safety, health, and environmental regulations specific for the chemical that are not indicated elsewhere on the SDS.
23
PPT-SM-SDS-2019
Section 16 identifies the preparation or last revision date of the chemical’s SDS.
24
PPT-SM-SDS-2019
SDSs give workers detailed information on the hazards of the chemicals they work around and how to control those hazards.
SDSs must be located in the area where the hazardous substances will be used and easily accessible for all workers. Always read a chemical’s SDS before you use that chemical.
25
Copyright © 2016 by PEC/Premier Safety Operations, LLC
Safe
ty M
eetin
g Quiz
: Saf
ety D
ata S
heets
Sign and date this quiz sheet. Circle the letter representing the correct answer to each quiz question below.
Name:©
201
9 PE
C S
afet
y, In
c.
QUIZ-SM-SAFETY DATA SHEETSFEBRUARY 2019
Date:
1. The ___________ requires chemical manufacturers and importers to provide hazard information to companies and workers by putting labels on containers and preparing safety data sheets (SDSs).
A. Hazard Communication Standard (HCS)
B. National Fire Protection Association (NFPA)
C. American Conference of Governmental Industrial Hygienists (ACGIH)
D. Environmental Protection Agency (EPA)
2. A(n) ____________ gives workers detailed information about the hazards of a specific material and how to control those hazards.
A. Job safety analysis (JSA)B. Chemical inventoryC. Safety data sheet (SDS)D. Work permit
3. SDSs are divided into ____________ sections of Hazard Communication Standard (HCS)-required information.
A. 14B. 16C. 18D. 20
4. The information on an SDS must be in ____________.
A. SpanishB. GermanC. ItalianD. English
5. Your company’s ____________ must include procedures for having an SDS for each chemical and making them available for workers.
A. Drug-free Workplace Program
B. Lockout/Tagout ProgramC. HCS ProgramD. Employee Assistance Program
6. SDSs must be located in the area where the hazardous substances will be used and easily accesible for ____________
A. Only managersB. Only short service employees
(SSEs)C. Only contractorsD. All workers
7. Make sure you read a chemical’s SDS ____________ you use that chemical.
A. AfterB. BeforeC. WhileD. Every time
8. Pictograms, signal words, hazard staetments, and symbolic labels, such as the ____________ 704 label, can be found in Section 2 on the SDS.
A. Occupational Safety and Health Administration’s (OSHA)
B. National Fire Protection Association’s (NFPA)
C. Hazard Communication Standard’s (HCS)
D. American National Standards Institute’s (ANSI)
9. When you need to know basic first aid for a chemical, check ____________ on an SDS.
A. Section 4B. Section 12C. Section 8D. Section 16
10. To find out if a chemical can safely be stored near another chemical, look in ____________.
A. Section 15B. Section 13C. Section 7D. Section 2
Fire S
afety
Safety Meeting Answer Keys: Safety Data SheetS Instructors: The following key shows the answers for the Safety Data Sheets safety meeting quiz.
© 2019 PEC
Safety, Inc.
KEY-SM-SAFETY DATA SHEETSFEBRUARY 2019
1. A
2. C
3. B
4. D
5. C
6. D
7. B
8. B
9. A
10. C
STUDENT ROSTER
PRINT STUDENT NAME (CLEARLY) STUDENT SIGNATURE LAST 4 SSN or DOB1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
INSTRUCTOR NAME SAFETY MEETING DATE
SAFETY MEETING NAME COMPANY NAME
Student Instructions: Print and sign your name. Also, provide your date of birth or the last four digits of your social security number.
©2014 PEC Safety, Inc. All rights reserved.