safety and health i n electrical eng

16
BY : NURAIN BINTI MAHAMAD ZAINI YUSMUNIERAH BINTI YUSOF

Upload: yusmunierah

Post on 12-Jul-2015

56 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Safety and health i n electrical eng

BY :NURAIN BINTI MAHAMAD ZAINIYUSMUNIERAH BINTI YUSOF

Page 2: Safety and health i n electrical eng
Page 3: Safety and health i n electrical eng

What is SAFETY? SAFETY – is the

condition of being protected from or unlikely to cause danger, risk or injury.

William W.Lowrance – A thing is safe if its risks are judged to be acceptable.

Page 4: Safety and health i n electrical eng

Safety

FREEDOM FROM DANGER OR HARM

Nothing is Free of

DANGER

BUT - We can almost always make something SAFER

Page 5: Safety and health i n electrical eng

Concepts of Safety Engineering

Interdisciplinary ought to be applied early in system development.

Safety should be considered a long-term investment.

Control monetary and physical loses .

Page 6: Safety and health i n electrical eng

Electrical Safety Standards

Page 7: Safety and health i n electrical eng

“Qualified Person” – OSHA 1910.399

The most qualified person to conduct electrical equipment is…

One who has received training and has demonstrated skills in the construct and operation of electrical equipment and hazards involved.

Page 8: Safety and health i n electrical eng

1910.334 Use of Equipment

Covers things like:

Portable equipment

Plugs and cords

Reclosing circuits

Inspection of equipment

Page 9: Safety and health i n electrical eng

Prevention of disease/injury

Promotion of good health and

safety

Improvement of safety and

health

HEALTHY, SAFE, COMFORTABLE PRODUCTIVITY

“Why we need safety??”

Page 10: Safety and health i n electrical eng
Page 11: Safety and health i n electrical eng

Electrician safety rules . Maintain all tools .

Report selective tools .

Tag out defective equipment.

Clean up work area .

Operate equipment according to manufacturers directions.

Proper footwear is mandatory.

Page 12: Safety and health i n electrical eng

-CAUSES…-

Electric failure typically due to :

Improper use.

Inadequate training.

Lack of experience.

Improper (lack of) use of manuals.

Device failure.

Page 13: Safety and health i n electrical eng

-Electric Hazards-

Electric hazards may results in :

Electric shocks.

Thermal burn.

Arc flash effects

Page 14: Safety and health i n electrical eng

Electrical Injuries

Electric Shock Received when current passes through the body

Severity of the shock depends on:

Path of current through the body

Amount of current flowing through the body

Length of time the body is in the circuit

LOW VOLTAGE DOES NOT MEAN LOW HAZARD!!!!!!!

Page 15: Safety and health i n electrical eng

How To Prevent Electric Failure?

The engineers should know the condition of work and workplace.

Take active part in keeping ourselves safe and healthy.

Implementing safe procedures.

Page 16: Safety and health i n electrical eng

Credit to : PM.Dr.JIWA ABDULLAH

THE END….