saeindia collegiate club activitiesmae.mait.ac.in/pdf/yjuly2016.pdf · 2018-10-11 · sae baja...
TRANSCRIPT
![Page 1: SAEINDIA Collegiate Club Activitiesmae.mait.ac.in/pdf/YJuly2016.pdf · 2018-10-11 · SAE BAJA event was held at Indore on 16th February, 2016 to 23rd February, 2016 in which a total](https://reader031.vdocuments.us/reader031/viewer/2022013009/5e979c2a8fea0430cb0fbb53/html5/thumbnails/1.jpg)
SAE BAJA event was held at Indore on 16th February, 2016
to 23rd February, 2016 in which a total of 396 teams
participated from all over India. Our MAIT team JATAYU
got 1st position among the North Indian teams including IIT
Roorkee, NIT Jallundhar, NIT Kurukshetra, PEC
University Chandigarh, Guru Nanak Dev Engg. College
Ludhiana, Amity University Noida, IGIT Delhi etc Our
team got 16th position all over India.
Out of 9 final year students - 7 qualified the BAT
(Placement exam conducted by SAE India) and four
students were placed in the different companies.
1. Mr. Vipul got placed in Eleation with annual package of
Rs. 5.5 lacs
2. Mr. ChetanDidwani got selected in Varroc with annual
package of Rs. 4.0 lacs
3.Mr. Rajat got selected in ARAI with annual package of
Rs. 3.5 lacs
4.Mr. VaibhavTyagi got selected in Mahindera&Mahindera
with annual package of Rs. 5.75 lacs.
- SAE BAJA EVENT AT INDORE
SAEINDIA Collegiate Club Activities
SAEINDIA collegiate club team “JATAYU” participated in
three off-road competitions this year, which were organized
at following place:-
(i) Budh International Circuit (BSI), Greater Noida on 22-26
Jan 2016.
(ii) NATRIP (BAJA SAE), Indore on 16 -23 Feb 2016.
(iii) Rochester, USA (SAE International) on 9 -12 June 2016.
January- July 2016
Team JATAYU at BAJA SAE Rochester Competition, USA
Mahraja Agrasen Institute of Technology sponsored the Team
Jatayu (which included 7 students and one faculty) for
participation in SAE BAJA event at Rochester USA during 9-
12 June 2016. MAIT provided Rs.4.5 lakh for to and from
transportation and Rs.75000/- for faculty member.
The competition began on 9th June 2016 and team JATAYU
cleared its engine inspection successfully. on that day, the
team also had a decent showing at sales event On 10th June
team had Design Event where our team secured 12th rank all
over the world while being the first from India. The second
Indian team had 28th rank worldwide so we had a good lead
over others in this event,
The team cleared its technical inspection on 11th June
morning without any hiccups.. Brake test followed technical
inspection and the team cleared the brake test in first attempt
too. After that team JATATU completed the acceleration,
maneuverability and hill climb events.
Next day was a crucial day as it had the endurance race. The
track was the most difficult track that team had ever
witnessed and racing was amongst the best schools like
Michigan Ann Harbour, Cornell University, etc. The team
had an axle failure during the endurance race due to which
team Jatayu lost half an hour during that time. But Jatayu
completed the endurance race successfully and were 2nd
amongst Indian teams, trailing by just 2 laps from the one
coming first and secured 36th rank.
Overall event rank 52 out of 105. Country participated USA,
Canada, Brazil, Mexico, Venezuela and INDIA.
This was the team’s first showing at an international event
and the learning experience was immense, Jatayu was the
smallest team contingent at the competition comprising of 7
students and 1 faculty only. This was just a beginning for
better things to come and learnings over here will only
motivate to grow even more and achieve higher goals.
![Page 2: SAEINDIA Collegiate Club Activitiesmae.mait.ac.in/pdf/YJuly2016.pdf · 2018-10-11 · SAE BAJA event was held at Indore on 16th February, 2016 to 23rd February, 2016 in which a total](https://reader031.vdocuments.us/reader031/viewer/2022013009/5e979c2a8fea0430cb0fbb53/html5/thumbnails/2.jpg)
•New equipments worth Rs 2.50 lakhs were purchased in
Mechanics of Solid and Mechanics of Fluids Laboratory.
•A new lab is being developed for Heat Transfer and
I.C.Engine. Purchase order of equipments worth Rs 3.5 Lakh
has already placed.
•New Lab for Automotive Engineering will be developed
during 2016-2017.
January – July 2016
Poster presentation on design of Haptic Arm
Development of Labs
5th International Symposium on Fusion of Science and
Technology (ISFT) was held at National Agricultural Science
Center, Pusa, Delhi from January 18-22, 2016. Mr. Manik
Singla, a 3rd year MAE student participated in this event and
presented a poster presentation on “Designing of Haptic Arm
based on Tilt Sensor Accelerometer” in the field of robotics.
The presentation was highly appreciated by the organizing
committee of the event.
The poster explained the amalgamation of haptic technology
and robotics which can help the people with various
disabilities along with their ability to work in varied climates
and dangerous sites.
GIAN Course Five faculty members of the Department attended a GIAN
course on ‘Production Planning for Manufacturing
Excellence’ during July 4 - 8, 2016 organised by DTU under
the aegis of Ministry of HRD, Government of India.
Spoken Tutorial course
During Jan-May 2016, A course on Scilab was organized for
3rd year MAE students with the help of Spoken Tutorials
Project of IIT Bombay. Two hundred one students attended
the course successfully. The evaluation was done through
online examinations and certificate to each successful
student was provided by IIT Bombay.
INDUSTRIAL VISIT TO RUSKIN TITUS INDIA PVT. LTD
Industrial visit is a part of the educational tour which provides students with an opportunity to learn practically through interaction, working methods and employment practices. An industrial visit to Ruskin Titus India Private Ltd, Manesar was organized on 12th March, 2016 for students of Mechanical and Automation Engineering Dept. This company deals in manufacturing of Air Distribution products. The students learned about factory fabricated ducting, dampers, diffusers, smoke eliminators, fans, louvers, variable air volume (VAV) and many more. The company gave the information about all the products and how these are used by Delhi Metro and other corporations The students were also shown the sheet rolling processes, welding processes and silencers.,
Highlighting features of team Jatayu’s Vehicle
The Vehicle has a top speed of 55 Kmph.
It takes less time to reach 0 to 60 than pulsar motorcycle.
The vehicle can perform hill climb till 45 degrees angle.
It can pull a bus.
The vehicle is light weight as well as strong.
The vehicle’s ergonomics is good which makes it very
comfortable for the driver.