sae g-12 fluids subcommittee meeting montreal, october 2014 eric villeneuve, amil sponsor ams as5900...
TRANSCRIPT
SAE G-12 Fluids Subcommittee MeetingMontreal, October 2014
Eric Villeneuve, AMILSponsor AMS AS5900
AS5900 StandardUpdate
AS5900 Update
SAE-G12 Fluids Subcommittee, Montreal October 2014 2
Standard Test Method for Aerodynamic Acceptance
of
SAE AMS 1424 & 1428 AircraftDe/Anti-icing Fluids
AS5900 Update
SAE-G12 Fluids Subcommittee, Montreal October 2014 3
Version B remains the active document
Revised in 2007
Working on some potential changes with inputs from Aerodynamic Working Group
Still working on some of those changes before ballot
AS5900 - Next Revision
SAE-G12 Fluids Subcommittee, Montreal October 2014 4
• Proposed some minor editorial changes General improvement of wording and formating
Updated tables and figures
Informations moved out of the Scope into a new
section (General Information) to reduce scope and
satisfy SAE guide document
AS5900 - Next Revision
SAE-G12 Fluids Subcommittee, Montreal October 2014 5
• Reorganisation of section 4
4. TEST FACILITY REQUIREMENTS4.1 Calibration and Test Equipment4.2 Test Duct Description4.2.1 Material4.2.2 Dimensions4.2.3 Tolerances4.2.4 Design Features4.3 Test Duct Gas Flow Core Characteristics4.3.1 Test Gas4.3.2 Gas Temperature 4.3.3 Gas Pressures4.3.4 Gas Velocity4.3.5 Relative Humidity4.4 Test Fluid Temperature Measurement4.5 Test Facility Drainage4.6 Example Facility
4.TEST FACILITY REQUIREMENTS4.1 Test Duct Description4.1.1 Dimensions4.1.2 Tolerances4.1.3 Design Features4.2 Test Duct Gas Flow Core Characteristics4.2.1 Test Gas4.2.2 Temperature Range4.2.3 Temperature Stability4.2.4 Temperature Spatial Uniformity4.2.5 Velocity Range4.2.6 Turbulence4.2.7 Velocity Spatial Uniformity4.2.8 Relative Humidity4.3 Test Facility Thermal Stability4.3.1 Test Duct4.3.2 Test Facility4.4 Test Facility Drainage4.5 Instrumentation4.5.1 Temperature and Relative Humidity4.5.2 Test Duct Gas Pressures4.5.3 Test Duct Gas Velocity and Turbulence4.6 Example Facility
• Figures which explain speeds for tests
AS5900 - Next Revision
SAE-G12 Fluids Subcommittee, Montreal October 2014 6
Draft
AS5900 - Next Ballot
SAE-G12 Fluids Subcommittee, Montreal October 2014 7
Comments or suggestions?
Contact Informations :Eric Villeneuve AMIL
1-418-545-5011 (2266)Mobile : 1-418-812-5093
Next AS5900 ballotnot scheduled yet