s3920 / s3921 - master lock · drawing is derived from solid works cad model and is produced in...
TRANSCRIPT
www.masterlocksafety.com • www.masterlock.com
© 2013 Master Lock Company LLC | All Rights ReservedMaster Lock Company LLC, Milwaukee, WI 53210 U.S.A. | 800-308-9244Master Lock Canada, Oakville, Ontario L6H 5S7 Canada | 800-227-9599 Master Lock Europe S.A.S; 0033.1.41.43.72.00; E-mail: [email protected] Lock Europe-UK Office, Wakes Colne, Colchester CO6 2DB, UK, 0044.1.787.222.027, E-mail: [email protected]玛斯特锁贸易(上海)有限公司 上海市浦东新区银城中路168号上海银行大厦1006室 400-820-6535 E-mail:[email protected]
S3920 / S3921
P11308
P11308
✔ ✗ ✗
P11308
P11308
✔ ✗ ✗
P11308
P11308
✔ ✗ ✗
1
3
2
5
4
6
P25
010
DRAWING IS DERIVED FROM SOLID WORKS CAD MODEL AND IS PRODUCED IN ACCORDANCE WITH ASME Y14.100 -2000 AND RELATED DOCUMENTATION PRACTICES
THIS DRAWING AND THE INFORMATION IT CONTAINS IS THE PROPRIETARY PROPERTY OF THE MASTER LOCK COMPANY, INC.AND MAY NOT BE REPRODUCED WITHOUT WRITTEN PERMISSION FROM MASTER LOCK COMPANY PRODUCT ENGINEERING.
PRODUCTNUMBER DRAWING NO. REV.
OAK CREEK, WISCONSIN
TITLE
MATERIAL
PLATING/FINISH UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE DUAL IN/[MM]TOLERANCES ARE AS FOLLOWS:
INCH [MM]X.XXX ± 0.005 [ ± 0.13]X.XX ± 0.02 [ ± 0.51]ANGULAR ± 1.0 °
HEAT TREAT
THIRD ANGLE PROJECTION
ECO NUMBER FILE NAME SHEET SCALE SIZE
NIBCO BFV 6IN LC-2000-3_assembly
NIBCO BFV 6IN LC-2000-3_assembly A
DESCRIPTIONAPPBYDATEECO #REV...2006/06/17
1 OF 1 1:8
R
P11308P11308
P11308P11308