· s. no name of the faculty member name of the subject topic date of the class time of the class...
TRANSCRIPT
S. No
Name of the Faculty member
Name of the subject Topic Date of the class Time of the class
Class Room
number
Block name / Department
nameSampling theorem 10/3/2017 10.05 to 10.55
Properties of Laplace Transform 10/8/2017 10.05 to 10.55
Noise in SSB & FM system 09.03.18 10.05 to 10.55
PAM Generation & demodulation of PAM 21.03.18 10.05 to 10.55
Generation & demodulation of PWM; 21.03.18 10.05 to 10.55
Tracking with Radar, Sequential Lobing 19.08.2017 11.10 to 12.00
Conical Scan 22.08.2017 1.40 to 2.30Monopulse Tracking
Radar 23.08.2017 10.5 to 10.55
Amplitude Comparison
Monopulse (one coordinate and two
coordinates),
24.08.2017 11.10 to 12.00
Phase Comparison Monopulse Radar 29.08.2017 1.40 to 2.30
Introduction: Introduction to
integrated circuits15.06.17 10.05 to 10.55
Integrated circuits – types, Classifications 10.07.17 10.05 to 10.55
Package types and temperature ranges 13.07.17 10.05 to 10.55
Characteristics of OP–amps 15.07.17 10.05 to 10.55
Timers and Phase Locked Loops:
Introduction to 555 timer
25.09.17 10.05 to 10.55
Monostable and astable operations and
applications4.10.17 1.40 to 2.30
PLL - introduction, block schematic 6.10.17 10.05 to 10.55
Full – wave Rectifier 6/29/2017 11.10 to 12.00Diode Compensation
Techniques 7/26/2017 11.10 to 12.00
Transistor Hybrid model 8/4/2017 10.5 to 10.55
Introduction to single stage Amplifiers 9/12/2017 9.15 to 10.05
Oscillators 11/28/2017 9.15 to 10.05Introduction to
Multistage Amplifiers 12/15/2017 10.05 to 10.55
C E Amplifier 1/27/2018 11.10 to 12.00Class A Power
Amplifier 2/16/2018 12.00 to 12.50
Tuned Amplifiers 3/9/2018 12.00 to 12.50Radar Block Diagram
and Operation 6/17/2017 09:15 to 10:05
Doppler Effect, CW Radar – Block Diagram 7/13/2017 11:10 to 12:00
List of Teachers using ICT enabled learning facility Academic Year 2017-18
Electronics Circuits - II
4 Dr.M.Jayamanmadha Rao
SS (II B.TECH. I SEMESTER) A/SF-25 A-Block / ECE
SF-22
A-Block / Electronics &
Communication Engineering
Dr. A.S.SRINIVASA RAO1
3 Dr. G.Sateesh Kumar SF-12
A-Block / Electronics &
Communication Engineering
Electronic Circuits - 1 SF-12
A-Block / Electronics and communications
Engineering
General Characteristics of Negative feed back 10/5/2017 10.05 to 10.55
SF-21
A-Block / Electronics and communications
Engineering
2 Dr. Y. Gopala Rao
AC (II B.Tech-II Sem)
RE (B. Tech-I Sem)
A-Block / Electronics &
Communication Engineering
SF-13
LICA (III B.Tech-I Sem)
Tracking with Radar, Sequential Lobing 8/30/2017 12:00 to 12:50
Conical Scan 9/5/2017 09:15 to 10:05Monopulse Tracking
Radar 9/6/2017 12:00 to 12:50
BEHAVIORAL MODELING: Entity
Declaration, Architecture Body
03.10.17 01:40to 02:30
Process Statement, Variable Assignment
Statement05.10.17 09:15 to 10:05
Signal Assignment Statement, Wait
Statement,If Statement,Case
Statement,
06.10.17 12:00 to 12:50
Package Body, Design Libraries, Design File. 28.10.17 12:00 to 12:50
FSM ARCHITECTURES:
Architectures Centered around non registered
PLDs,
26.04.2018 10:05 to 10:55
Design of state machines centered
around shift registers27.04.2018 09:15 to 10:05
One Hot state machine, 04.06.2018 01:40to 02:30
Petrinets for state machines-Basic
concepts and properties,
05.06.2018 02:30 to 03:20
Finite State Machine-Case study. 07.06.2018 12:00 to 12:50
Diode clippers 7/21/2017 9.15-10.05
Diode clippers 7/24/2017 11.10-12.00Diode clippers 7/25/2017 11.10-12.00
Transfer characteristics of
clippers7/28/2017 9.15-10.05
clipping at two independent levels 8/2/2018 11.10-12.00
Transistor clippers 8/3/2018 2.30-3.20clamping circuits using
diode with different inputs
8/16/2018 11.10-12.00
MOSFET characteristics 4/11/2018 1:40-2:30
2:30-3:20MOSFET
characteristics 4/13/2018 12:00-12:50 1:40-2:30
MOSFET characteristics 4/13/2018 9:15-10:05
12:00-12:501:40-2:302:30-3:203:20-4:10
UJT characteristics 4/20/2018 1:40-2:302:30-3:20
B.RAMARAO 5
6 Dr. M.N.V.S.S. KUMAR PDC (B. Tech-I Sem)
RE (IV B.TECH. I SEMESTER) A/FF-08 A-Block / ECEIntroduction, Principle
of MTI Radar 8/8/2017 09:15 to 10:05
CPLD(I M.TECH. II SEMESTER)
A/FF-23 A-Block / ECE
DDT HDL (I M.TECH. I
SEMESTER)A/FF-23 A-Block / ECE
PACKAGES AND LIBRARIES: Package 26.10.17 09:15 to 10:05
SF-22
A-Block / Electronics and communication
Engineering
Electronics and
SCR characteristics 4/17/2018
SCR characteristics 4/19/2018
UJT characteristics 4/20/2018 12:00-12:501:40-2:30
SF-16
A-Block / electronics and
UJT characteristics 4/21/2018 9:15-10:0512:00-12:501:40-2:30
Maxwell equation-diff forms &word
statements1/30/2018 1.40-2.30
Maxwell equation-diff forms &word
statementsBoundary conditions dielectric-dielectric 2/5/2018 11.10-12
Boundary conditions dielectric-conductor 2/6/2018 11.10-12
Boundary conditions 2/8/2018 1.40-2.30Electronic space
division switching: control subsystem
10.07.17 9:15 to 10:55
SPC 7/12/2017 1:40 TO 2:30
centralized SPC, modes 17.07.17 9:15 to 10:05
modes 7/19/2017 1:40 to 2:30modes 7/24/2017 9:15 to 10:05
Distributed SPC 24.07.17 10:05 to 10:55Distributed SPC 26.07.17 1:40 to 2:30
Two stage networks 28.07.17 2:30 to 3:20Time multiplex
switching 05.08.17 12:00 to 12;50
Combination switching 7.08.17 9:15 to 10:05Introduction to
integrated circuits 13.06.17 10.05 to 10.55
Integrated circuits – types, Classifications 10.07.17 1.40 to 2.30
Package types and temperature ranges 13.07.17 3.20 to 4.10
Characteristics of OP–amps 18.07.17 12.00 to 12.50
Phase Locked Loops Timer& Timers 22.09.17 1.40 to 2.30
Introduction to communication systems 28.11.17 10.05 to 10.55
Pulse Modulation: Types of Pulse
modulation15.03.18 10.05 to 10.55
PAM (Single polarity, double polarity) Generation &
demodulation of PAM
16.03.18 12.00 to 12.50
Generation & demodulation of
PWM; Generation and demodulation of PPM
17.03.18 1.40 to 2.30
Applications of digital image processing 6/15/2017 12-12.50
EM spectrum and its explanation 6/21/2017 10.05-10.55
Image Acquisition 6/22/2017 11.10-12.50Wavelet Transform
Introduction 7/29/2017 9.15-10.05
Frequency Domain Filtering 8/23/2017 10.05-10.55
Color Models Introduction 10/5/2017 12-12.50
9.15-10.05
FF-12 A-Block / ECE
7 P.V.MURALIDHAR Electronics and circuits
Applications 4/24/2018
2/1/2018
8 M.V.H.Bhaskara Murthy FF-18
A-Block / Electronics &
Communication Engineering
SF-22
A-Block / Electronics &
Communication Engineering
1:40-2:30
TSSN (B. Tech-I Sem)
LICA (III B.Tech-I Sem)
AC (II B.Tech-II Sem)
electronics and communication
Engineering
SF-21
FF-08DIP (IV/IV B.
Tech-I Semester - A Section)
Full color image processing and
Conversion of color model
10/7/2017 9.15-10.05
Multiple Bus Structures 6/22/2017 12-12.50
Computer Hardware Parts 6/24/2017 1.40-2.30
Flow chart of Addition – Subtraction algorithm 7/18/2017 10.05-10.55
Hardware Configuration of
Addition – Subtraction algorithm for sign
magnitude data
7/25/2017 10.05-10.55
Multiplication algorithm & Booth
Multiplier algorithm explanation
8/1/2017 9.15-10.55
Division algorithm explanation 8/9/2017 12-12.50
Blooms Taxonomy 11/27/2017 9.15-10.05Density functions and
their density and distribution functions
1/5/2018 11.10-12.50
Gaussian density function and its representation
1/8/2018 9.15-10.05
Concept of random process- Classification 2/12/2018 9.15-10.05
Relation between power spectrum and
autocorrelation function
3/14/2018 2.30-4.10
Blooms Taxonomy 11/30/2017 9.15-10.55Density functions and
their density and distribution functions
1/4/2018 9.15-10.55
Gaussian density function and its representation
1/11/2018 9.15-10.55
Concept of random process- Classification 2/15/2018 9.15-10.55
Relation between power spectrum and
autocorrelation function
3/15/2018 9.15-10.55
Full – wave Rectifier 6/28/2017 11.10 to 12.00Diode Compensation
Techniques 7/27/2017 11.10 to 12.00
Transistor Hybrid model 8/5/2017 10.5 to 10.55
Introduction to single stage Amplifiers 9/10/2017 9.15 to 10.05
General Characteristics of Negative feed back
Amplifiers 10/6/2017 10.05 to 10.55
Diode clippers 7/22/2017 9.15-10.05Diode clippers 7/25/2017 11.10-12.00Diode clippers 7/26/2017 11.10-12.00
Transfer characteristics of
clippers7/29/2017 9.15-10.05
9 D. Yugandhar
SF-21
A-Block / Electronics and communication
Electronic Circuits - 1 SF-9
A-Block / Electronics and communications
Engineering
COA (III/IV B. Tech-I Semester-
B Section)
R.V & S.P (II/IV B. Tech-II
Semester - B Section)
SF-22
R.V & S.P (II/IV B. Tech-II
Semester - C Section)
SF-25
PDC (B. Tech-I Sem)
SF-26
A-Block / Electronics &
Communication Engineering
clipping at two independent levels 8/3/2018 11.10-12.00
Transistor clippers 8/4/2018 2.30-3.20clamping circuits using
diode with different inputs
8/17/2018 11.10-12.00
Oscillators 11/26/2017 9.15 to 10.05Introduction to
Multistage Amplifiers 12/17/2017 10.05 to 10.55
C E Amplifier 1/28/2018 11.10 to 12.00Class A Power
Amplifier 2/18/2018 12.00 to 12.50
Tuned Amplifiers 3/12/2018 12.00 to 12.50
Applications of digital image processing 6/14/2017 12-12.50
EM spectrum and its explanation 6/20/2017 10.05-10.55
Image Acquisition 6/21/2017 11.10-12.50Wavelet Transform
Introduction 7/25/2017 9.15-10.05
Frequency Domain Filtering 8/22/2017 10.05-10.55
Color Models Introduction 10/3/2017 12-12.50
Full color image processing and
Conversion of color model
10/9/2017 9.15-10.05
8086 processor Architecture 22.11.17 2.30 pm to 4.10 pm
Read & write Timing Diagrams
6.12.17 & 7.12.17 2.30 pm to 4.10 pm
Instruction set 13.12.17 2.30 pm to 4.10 pmArchitecture of 80386
Processor 3.1.18 2.30 pm to 4.10 pm
Register organization 4.1.18 12 pm to 12.50 pmControl words of
8259A 29.1.18 2.30 pm to 4.10 pm
8255 PPI 2.2.18 9.15 to 10.05Control words of 8257 22.2.18 12 to 12.50
8279 key board controller 23.2.18 9.15 to 10.05
Control words of 8279 26.2.18 2.30 pm to 3.20 pmUSART 8251 26.2.18 3.20 pm to 4.10 pm
Interfacing programs 27.2.18 12 to 12.50Architecture 11.3.18 2.30 pm to 4.10 pm
Signal description 11.3.18 12 to 12.50Register set 14.3.18 9.15 to 10.05
Interduction to feedback amplifiers and classification of
amplifiers
10/6/2017 1:40-02:30
Feedback concept,characteristics of negative feedback
amplifiers
10/7/2017 1:40-02:30
Effect of feedback on input and out put
resiistances10/10/2017 12:00-12:50
Radiation mechanism 6/14/2017 1.40 to 2.30Ground wave propagation 9/25/2017 11.10 to 12.00
Sky wave propagation 10/3/2017 1.40 to 2.30
11 C.H.Rajasekhara rao
10 V.Ashok kumar
FF-09
Voltage series , voltage shunt current series 10/11/2017 12:00-12:50
SF-21
A-Block / Electronics &
Communication Engineering
SF-22
A-Block / Electronics &
Communication Engineering
SF-21 communication Engineering
Electronics Circuits - II SF-12
A-Block / Electronics and communications
Engineering
A-Block / electronics and communication
Engineering
SF-26 A-Block / ECE
Electronics circuits -1
AWP (3rd B. Tech-I Sem) Sec-A
(B. Tech-I Sem)
DIP (IV/IV B. Tech-I Semester)
MPMC (B. Tech-II Sem)
Space wave propagation 10/6/2017 1.40 to 2.30
Duct propagation 10/9/2017 11.10 to 12.00Radiation mechanism 6/14/2017 11.10 to 12.00
Ground wave propagation 9/23/2017 9.15 to 10.05
Sky wave propagation 10/4/2017 11.10 to 12.00Space wave propagation 10/7/2017 9.15 to 10.05
Duct propagation 10/7/2017 11.10 to 12.00Review of coordinate
systems 11/27/2017 11.10 to 12.50
vector calculus 11/29/2017 2.30 to 3.20smith chart 3/21/2018 2.30 to 3.20
stub matching 3/22/2018 9.15 to 10.05Approximate analysis
of CE amplifier 9/7/2017 12.00 to 12.50
Approximate analysis of CB amplifier 9/11/2017 1.40 to 2.30
Approximate analysis of CC amplifier 9/11/2017 2.30 to 3.20
Approximate analysis of CE amplifier with
emitter resistance9/13/2017 10.05 to 10.55
Miller’s theorem 9/14/2017 12.00 to 12.50
EC-1 9/8/2017 11.10 to 12.00
Folded –dipole antenna 9/8/2017 12.00 to 12.50
Corner reflector antenna 9/12/2017 10.05 to 12.55
Parabolic reflector antenna 9/14/2017 10.05 to 10.55
Horn antenna 9/16/2017 2.30 to 3.20Introduction to DSP
processors 3/7/2018 2.30 to 3.20
Architecture of TMS320C50 3/12/2018 12.00-12.50
MAC Unit 3/13/2018 1.40 to 2.30Addressing modes 3/14/2018 11.10 to 12.00
Pipelining 3/16/2018 10.05 to 10.55
Types of shift registers 3/15/2018 2.30 to 3.20
Universial shift register 3/19/2018 9.154 to 10.05Asynchronous counters 3/20/2018 11.10 to 12.00
JFET characteristics 4/11/2018 1:40-2:30
E-MOSFET &characteristics 4/19/2018 9:15-10:05
UJT& characteristics 4/21/2018 2:30-3:20Fundamentals of
Oscillators 11/30/2017 12:00-12:50
RC phase shift oscillator 12/6/2017 11:10-12:00
Hartley oscillator 12/14/2017 11:10-12:00
Class B pushpull amplifier-Analysis 3/7/2018 11:10-12:00
Quantization process, waveform 19.06.17 12.00 to12.50
12 sri. V. Lokesh RajuSF-12 A-Block / ECE
SF-21
A-Block / Electronics and Communication
Engineering
SF-22 A-Block / ECE
SF-22
A-Block / Electronics and Communication
Engineering
I Sem) Sec-A
AWP (3rd B. Tech-I Sem) Sec-
C
EMWTL (2nd B. Tech-II Sem)
Sec-B
SF-12
A-Block / Electronics and Communication
Engineering
13 K.Chitambara Rao
1:40-2:30
14 M.S.R.NAIDU Electronic Devices
SF-26
A-Block / Electronics and Communication
Engineering
D-MOSFET &Characteristics 4/17/2018 12:00-12:50
SCR & characteristics 4/20/2018 12:00-12:50
RC coupled amplifier 1/6/2018
EC-1 (B. Tech-I Sem)
AWP (B. Tech-I Sem)
DSP (B. Tech-II Sem)
DLD (B. Tech-II Sem)
SF-15
A-Block / Electronics and communication
Engineering
SF-12
Delta modulation basic principle TX 30.06.17 1.40 to 2.30
QPSK RX block diagram , working 28.07.17 1.40 to 2.30
optimum and matched filter 7.08.17 12.00 to12.50
Introduction matrix description of LB codes 29.08.17 10.05 to10.55
Closed Loop control 01.07.17 9.15-10.05Transient response of second order systems 01.08.17 1.40-2.30
Stability Analysis from Bode Plots 31.8.17 2.30-3.20
Lag CompensatorsLead Compensators 11.09.17 10.05-10.55
Density functions and their density and
distribution functions20.01.18 2.30-3.20
Gaussian density function and its representation
20.01.18 2.30-3.20
Concept of random process- Classification 03.03.18 2.30-3.20
Relation between power spectrum and
autocorrelation function
15.03.18 2.30-4.10
Operation of cellular systems 13.12.17 11:10-12.00
Types of cell site antennas 29.01.18 9.15-10.05
GSM architecture 06.03.18 11:10-12.00Boolean Theorems 12/23/2017 10:05 to 10:55
Encoders 2/15/2018 1:40 to 2:30Conversion of Flip-
flops 3/16/2018 1:40 to 2:30
Boolean Theorems 12/21/2017 10:05 to 10:55Encoders 2/9/2018 1:40 to 2:30
Conversion of Flip-flops 3/13/2018 1:40 to 2:30
Static characteristics: 13.06.17 1.40 to 2.30Function Generators 17.07.17 9.15 to 10.05
Dual trace oscilloscope 21.08.17 9.15 to 10.05Digital storage
oscilloscope 23.8.17 1.40 to 2.30
Linear Variable Differential Transformer
22.09.17 9.15 to 10.05
Data acquisition systems. 06.10.17 9.15 to 10.05
Static characteristics: 15.06.17 1.40 to 2.30Function Generators 19.07.17 9.15 to 10.05
Dual trace oscilloscope 29.08.17 9.15 to 10.05Digital storage
oscilloscope 06.9.17 1.40 to 2.30
SF-16 A-Block / ECE
SF-16 A-Block / ECE
Digital Electronics (II
B.TECH. II SEMESTER SEC-
A )
A/SF-21 A-Block / ECE
Digital Electronics (II
B.TECH. II SEMESTER SEC-
A/SF-22 A-Block / ECE
Frequency Management And 14.02.18 11:10-12.00
15 K.V. Lalitha Bavani
16 G.S.S.S.S.V. K. Mohan
Signal reflections in flat and hilly terrains 03.01.18 11:10-12.00
09.09.17 9.15-10.05
Blooms Taxonomy 27.11.17 9.15-10.05
FF-18DC (III B.Tech I sem)
LCS (II B. Tech-I Sem)
R.V & S.P (II B. Tech-II Sem)
CMC ( IV B.TECH-II Sem)
EMI (III –A B. Tech I Sem)
EMI (III –B B. Tech I Sem)
SF-22
A-Block / Electronics &
Communication Engineering
SF-21
FF-13
Linear Variable Differential Transformer
5.10.17 9.15 to 10.05
Direct form – I , II, parallel form and
cascade form realization structures
2/3/2018 10:05 to 10:55
Problems on digital filter design and
realization structures2/6/2018 9:15 to 10:55AM and
2:30 to 4:10PM
Linear phase FIR digital filers 2/14/2018 11:10 to 12:00PM
Sampling rate conversion, decimation
and interpolation3/7/2018 1:40 to 2:30PM
Introduction to P-DSP Processors 3/9/2018 10:05 to 10:55
Bus architecture, Pipe line concepts,
Addressing modes of P-DSP
3/13/2018 10:05 to 10:55
On chip peripherals, CISC & RISC architectures
3/14/2018 2:30 to 4:10PM
Architecture of 320C5X DSP, Register Set, On chip peripheral
of 320C5X DSP
3/16/2018 1:40 to 2:30PM
On chip peripheral of 320C5X DSPs 3/20/2018 10:05 to 10:55
Sampling theorem, Impluse sampling,
natural sampling and flat top sampling
9/23/2017 1:40 to 2:30
Reconstruction of signals from samples 9/25/2017 11:10 to 12:00
Effect of under sampling – aliasing 10/3/2017 1:40 to 4:10
synchronous design methodology 29.08.2017 10.5 to 10.55
Impediments to synchronous design. 30.08.2017 11.10 to 12.00
CPLD 21.09.2017 1.40 to 2.30FPGA 23.09.2017 10.5 to 10.55
Design considerations of PLDs with relevant
digital ICs.03.10.2017 10.5 to 10.55
synchronous design methodology 29.08.2017 10.5 to 10.55
Impediments to synchronous design. 30.08.2017 11.10 to 12.00
Quantization process, waveform 19.06.17 11.10 to 12.00
Delta modulation basic principle TX 30.06.17 9.15 to 10.05
QPSK RX block diagram , working 28.07.17 10.05 to 10.55
optimum and matched filter 7.08.17 2.30 to 3.20
Introduction matrix description of LB codes 29.08.17 9.15 to 10.05
IC Production process 24.11.17 9.15 to 10.05MOS and CMOS
Fabrication Process 11/29/2017 9.15 to 10.05
A-Block / ECE
DSP (III B.TECH. II
SEMESTER)
17 H. Santosh Dadi
A/SF-26 A-Block / ECE
SS (II B.TECH. I SEMESTER) A/SF-21
DiCA(III-B.Tech-C-Sem-I) FF-18
A-Block / Electronics and Communication
Engineering
DC (III-B.Tech-B-Sem-I) SF-26
A-Block / Electronics and Communication
Engineering
VLSI Design flow and layers of abstraction 1/18/2018 9.15 to 10.05
Design rules for wires 2/3/2018 9.15 to 10.05Scaling models 2/6/2018 10.05 to 10.55
Design Capture tools, Design verification
tools3/15/2018 11.10 to 11.55
Need for CMOS testing, Design
strategies for test3/16/2018 11.10 to 11.55
Types of dispersions- Material dispersion 2/5/2018 9.15 to 10.05
Optical receiver operation-fundamental
receiver operation2/12/2018 9.15 to 10.05
Digital signal transmission 2/15/2018 9.15 to 10.05
Point to Point links- System considerations 3/7/2018 10.05 to 10.55
Overview of fiber optic networks, Transreceiver
3/12/2018 11.10 to 11.55
Wavelength division MUX and DEMUX 3/19/2018 11.10 to 11.55
CDMA-Network 3/21/2018 10.05 to 10.55
2.30 to
3.2Steady state response, errors, error constants 08.08.2017 9.15 to 10.05
2.30 to3.2
AC servo motor 21.08.2017 1.40 to 2.30
Lead-Lag Compensator 07.10.2017 9.15 to 10.05
Huffman coding 06.12.2017 9.15 to 10.05
QRS detection methods 16.12.2017 10.05 to 10.55Rhythm analysis. 03.01.2018 9.15 to 10.05
Arrhythmia detection algorithms 04.01.2018 9.15 to 10.05
Principles of adaptive noise canceling 31.01.2018 9.15 to 10.05
Microwave Bands, Application 6/16/2017 1.40-2.30
Magic Tee 7/29/2017 11.10-12.00Two Cavity Klystrons 8/22/2017 1.40-2.30
Reflex Klystrons – Mathematical Theory
of Bunching,8/24/2017 2.30-3.20
TWT- Amplification Process 9/6/2017 9.15-10.05
8-Cavity Cylindrical Magnetron 9/15/2017 1.40-2.30
NMOS &PMOS fabrication process. 12/1/2017 1.40-2.30
CMOS fabrication process 12/5/2017 10.05-10.55
Bi-CMOS technology 12/6/2017 9.15-10.05
18 M.Lakshmu Naidu
20
19
FF-08
SF-16 A-Block / ECE
Optical Detectors-Physical Principle of
PIN and APD22.01.18 9.15 to 10.05
FF-08
A-Block / Electronics and Communication
Engineering
Transient response 05.08.2017
SF-21 A-Block / ECEDC servo motor 19.08.2017
V. Laxmi
Jayalaxmi.Anem
OCN(IV-B.Tech-A-Sem-II)
LCS (II–A B. Tech I Sem)
BMSP (III –A B. Tech I Sem)
MWE (B. Tech-I Sem)
VLSI (III-B.Tech-C-Sem-II) FF-18
A-Block / Electronics and Communication
Engineering
A-Block / Electronics and communication
Engineering
A-Block /
Comparison between CMOS and bipolar
technologies.12/8/2017 1.40 -2.30
Design rules for wires 1/11/2018 1.40-2.30contacts and transistor 1/12/2018 9.15-10.05layout diagrams for NMOS & CMOS inverters and gates.
1/18/2018 9.15-10.05
Basic organization of computer. 6/18/2017 2.30 to 03.20
Types of Bus structures, software,
performance measurements
6/25/2017 9.15 to 10.05
Hardware organization, Match
logic, Read and Write operations
8/26/2017 9.15 to 10.05
Cache memory, Associative and direct
mapping concepts9/21/2017 11.10 to 12.00
Direct memory access, DMA controller, DMA
transfer10/5/2017 10.05 to 10.55
Pipeline: Parallel processing-concepts
and explanation10/21/2017 11.10 to 12.00
Pipelining concepts. Arithmetic pipeline, instruction pipeline
10/5/2017 1.40 to 2.30
Block diagram of Radar system 8/7/2017 11.10 to 12.00
Radar types-CW,FMCW 8/23/2017 9.15 to 10.05
Pulse radar syatem 9/11/2017 10.05 to 10.55Trackig radar-
Sequential Lobing,Conical Scan
9/14/2017 2.30 to 3.20
Matched filter Receiver-characteristics 10/4/2017 9.15 to 10.05
Displays, Duplexers-Types 10/5/2017 2.30 to 3.20
Need for interfafces 1/22/2018 9.15 to 10.05RS232/UART 2/5/2018 9.15 to 10.05RS422/RS485 2/12/2018 9.15 to 10.05USB ,Infrared 2/15/2018 9.15 to 10.05
Bluetooth 3/7/2018 10.05 to 10.55
Ethernet 3/19/2018 11.10 to 11.55IEEE 1394 Firewire 3/21/2018 10.05 to 10.55Architecture of 8086 1/30/2018 10:05 to 10:55
Architecture &Features of 80386 1/31/2018 09:15 to 10:05
Segmentation and paging of 80386 2/1/2018 11:10 to 12:00
PIC-8259A 2/2/2018 09:15 to 10:05Architecture of 8051 2/5/2018 10:05 to 10:55
Introduction to integrated circuits,
Differential Amplifier.6/12/2017 09:15 to 10:05
Integrated circuits – types, Classification, 29.06.17 12:00 to 12:50
A-Block / Electronics and Communication
EngineeringIEEE802.11
VLSI (B. Tech-II Sem)
RE(IV-B.Tech-C-Sem-I)
FF-18
A-Block / Electronics and Communication
Engineering
21 T.Viswanadham
FF-18
A-Block / Electronics and Communication
Engineering
FF-12
SF-26
A-Block / Electronics and communications
Engineering
ERTS(IV-B.Tech-B-Sem-II) FF-13
MPMC(III-B.Tech-C-Sem-II)
COA(III-B.Tech-C-Sem-I)
A-Block / Electronics and Communication
Engineering
3/12/2018 11.10 to 11.55
Package types and temperature ranges,
Op-amp block diagram01.07.17 11:10 to 12:50
UNIT-III: Need for interfafces, 30.01.18 10:05 to 10:55
RS232/UART 31.01.18 09:15 to 10:05RS422/RS485 01.02.18 11:10 to 12:00USB ,Infrared 02.02.18 09:15 to 10:05
Bluetooth 05.02.18 10:05 to 10:55IEEE802.11 06.02.18 10:05 to 10:55
Ethernet, 07.02.18 09:15 to 10:05IEEE 1394 Firewire 09.02.18 09:15 to 10:05PRINCEPLES OF
CROSS-BAR SWITCHING
6/29/2017 11.10 TO 12.00
BASIC TDSS 7/22/2017 11.10 TO 12.00TELEPHONE
NETWORKS,SUBSCRIBER LOOP NETWORKS
8/11/2017 1.40 to 2.30
PSDN 9/11/2017 10.05 TO 10.55DSL
TECHNOLOGIES, ADSL
10/6/2017 1.40 to 2.30
SONET 10/7/2017 9.15 TO 10.05INTRODUCTION TO
SPREAD SPECTRUM CDMA
6/19/2017 10.05 TO 10.55
COMMON CHANNEL
SIGNALLING7/25/2017 9.15 TO 10.05
RIGISTRATION AND TUNNELLING 8/22/2017 1.40 to 2.30
IEEE 802.11 ARCHITECTURE 9/11/2017 1.40 to 2.30
WATM AND WIRED ATM 10/6/2017 10.05 TO 10.55
UNIT-III: Need for interfafces, 1/29/2018 10:05 to 10:55
RS232/UART 1/31/2018 09:15 to 10:05RS422/RS485 2/1/2018 11:10 to 12:00USB ,Infrared 2/2/2018 09:15 to 10:05
Bluetooth 2/5/2018 10:05 to 10:55
Ethernet, 2/8/2018 09:15 to 10:05INTRODUCTION TO
SPREAD SPECTRUM CDMA
6/19/2017 10.05 TO 10.55
COMMON CHANNEL
SIGNALLING7/25/2017 9.15 TO 10.05
RIGISTRATION AND TUNNELLING 8/22/2017 1.40 to 2.30
IEEE 802.11 ARCHITECTURE 9/11/2017 1.40 to 2.30
WATM AND WIRED ATM 10/4/2017 10.05 TO 10.55
M. Bala Krishna 22
L.Rambabu
A-Block / ELECTRONICS
AND COMMUNICAT
ION ENGINEERING
ERTS (IV B.TECH. II
SEMESTER)
FF-13
A-Block / Electronics and Communication
Engineering
LICA (III B.TECH. I
SEMESTER)
PLL introduction, block schematic 27.09.17 2:30 to 03:20
WCN (IV-B.Tech-B-Sem-I)
WCN(B.Tech-IV-C-SEM-I) FF-12
TSSN(IV-B.Tech-C-Sem-I)
FF-12
A-Block / Electronics and Communication
Engineering
A/FF-12 A-Block / ECE
23
ERTS (IV-B.Tech-A-Sem-II) FF-08
A-Block / Electronics and Communication
EngineeringIEEE802.11 2/7/2018 10:05 to 10:55
A/SF-26 A-Block / ECE
741 op-amp & its features 17.07.17 09:15 to 10:05
Monostable and astable operations and 27.09.17 1:40 to 2:30
PRINCEPLES OF CROSS-BAR SWITCHING
6/29/2017 10.05 TO 10.55
BASIC TDSS 7/21/2017 1.40 to 2.30TELEPHONE
NETWORKS,SUBSCRIBER LOOP NETWORKS
8/11/2017 9.15 TO 10.05
PSDN 9/13/2017 10.05 TO 10.55
TSSN(B.Tech-IV-A-SEM-I)
DSL TECHNOLOGIES,AD
SL10/4/2017 1.40 to 2.30
SONET 10/6/2017 2.30 TO 3.20NMOS &PMOS
fabrication process. 12/1/2017 1.40-2.30
CMOS fabrication process 12/5/2017 10.05-10.55
Bi-CMOS technology 12/6/2017 9.15-10.05Comparison between CMOS and bipolar
technologies.12/8/2017 1.40 -2.30
Design rules for wires 1/11/2018 1.40-2.30contacts and transistor 1/12/2018 9.15-10.05layout diagrams for NMOS & CMOS inverters and gates.
1/18/2018 9.15-10.05
Quantization process, waveform 6/21/2017 1.40 to 2.30
Delta modulation basic principle TX 7/14/2017 12.00 to12.50
QPSK RX block diagram , working 8/9/2017 9.15 to 10.05
optimum and matched filter 10/17/2017 2.30 to 3.20
Introduction matrix description of LB codes 9/14/2017 2.30 to 3.20
Intro To FHSS 6/15/2017 1.40 to 2.30CCS 7/23/2017 9.15 to 10.05
Registration and tunneling 10/17/2017 10.05 to10.55
IEEE 802.11 Architecture 8/24/2017 9.15 to 10.05
WATM and wired ATM 9/11/2017 10.05 to10.55
Operation of cellular systems 13.12.17 2.30 to 3.20
Signal reflections in flat and hilly terrains 03.01.18 10.05 to10.55
Types of cell site antennas 29.01.18 1.40 to 2.30
Frequency Management And
Channel Assignment: intro
14.02.18 2.30 to 3.20
GSM architecture 05.03.18 1.40 to 2.30Level Sensitive Scan
Design (LSSD) 7/2/2018 10.5 to 10.55
Theory and operation of LFSR 7/3/2018 11.10 to 12.00
LFSR as Signature analyzer 7/5/2018 1.40 to 2.30
Multiple-input Signature Register 7/6/2018 10.5 to 10.55
Y.SRINIVASA RAO
24
SF-12
25
FF-08
FF- 23 A-Block / ECE
M.Chaitanya Kumar
A-Block / ECE
CMC (B.TECH-II Sem)
DFTS (M. Tech-II Sem)
FF-08 A-Block / ECE
FF-12 A-Block / ECE
A-Block / ELECTRONICS
AND COMMUNICAT
ION ENGINEERING
VLSI (B.Tech-III-A-SEM-II) SF-12
A-Block / ELECTRONICS
AND COMMUNICAT
ION ENGINEERING
DC (B.Tech I sem)
WCN (B. Tech-I Sem-)
BUILT IN SELF TEST: BIST concepts 7/9/2018 10.5 to 10.55
Generic offline BIST architecture 7/17/2018 9.15 to 10.05
synchronous design methodology 29.08.2017 10.5 to 10.55
Impediments to synchronous design. 30.08.2017 11.10 to 12.00
CPLD 21.09.2017 1.40 to 2.30FPGA 23.09.2017 10.5 to 10.55
Design considerations of PLDs with relevant
digital ICs.03.10.2017 10.5 to 10.55
Construction of JFET 9.4.18 10.5 to 11.00
JFET characteristics and parameters 12.4.18 11.00 to 11.50
Construction of MOSFET 16.4.18 1.40 to 2.30
MOSFET characteristics
Enhancement MODE20.4.18 10.5 to 11.00
depletion mode
Introduction to SCR and SCR characteristics
Common Source Amplifier 26.10.2017 1.40 to 2.30
Source Follower 26.10.2017 2.30 to 3.20Noise: Types of Noise 31.10.2017 11.10 to 12.00
Noise in Op-Amps 7.11.2017 10.05 to 10.55Advanced current
mirrors & comparators 10.11.2017 1.40 to 2.30
Fully differential op-amp 21.11.2017 9.15 to 10.05
Common mode feedback circuits
23.11.2017& 24.11.2017 11.10 to 12.50
PLL in the locked condition
7.12.2017 & 8.12.2017 9.15 to 10.55
14.12.2017& 15.12.2017
Switched capacitor circuits 19.12.2017 10.05 to 10.55
Parasitic Sensitive integrator 26.12.2017 1.40 to 2.30
Parasitic insensitive integrator 28.12.2017 10.05 to 10.55
Signal Flow graph analysis 29.12.2017 9.15 to 10.05
1sr order filters- switch sharing fully differential filters,
charged injection SC gain circuits
29.12.2017 1.40 to 2.30
Comparators: using an op-amp for comparator 5.01.2018 11.10 to 12.50
Charge injection errors 9.01.2018 2.30 to 3.20Latched Comparators 11.01.2018 1.40 to 2.30
Decoder based converter, resistor storing convertor
12.01.2018 10.05 to 10.55
Folded resistor string converter 12.01.2018 11.10 to 12.00
Voltage Controlled Oscillator
DICA (B. Tech-I Sem)
ED (B. Tech-II Sem)
AICD (M. Tech-I Sem)
26 Smt. E. Jaya SF- 12 A-Block / ECE
23.4.18 11.00 to 11.50
SF-23A-Block / VLSI
SYSTEM DESIGN
1.40 to 3.20
R-2R based converters, current mode D/A
converters23.01.2018 9.15 to 10.05
DAC based SAR, Flash converters 26.01.2018 11.10 to 12.00
Time inter leaved A/D converters 26.01.2018 12.00 to 12.50
Switched capacitor circuits: introduction 8.3.2018 1.40 to 2.30
Operation & analysis 9.3.2018 2.30 to 3.20Non ideal effects in switched capacitor
circuits13.3.2018 11.10 to 12.00
Integrators 16.3.2018 10.05 to 10.55Biquad filters 23.3.2018 1.40 to 2.30
PLL: Lock acquisiton 3.4.2018 9.15 to 10.05PLL: Basic charge 9.4.2018 11.10 to 12.50
PUMP PLL 10.4.2018 9.15 to 10.55
PFD/CP-Non Idealities 16.4.2018 1.40 to 3.20
DC & Dynamic specification
3.5.2108 & 4.5.2018 10.05 to 12.00
Digital to Analog converter 8.6.2018 1.40 to 2.30
Binary scaled conveters 15.6.2018 10.05 to 10.55
Thermo meter code converters 18.6.2018 9.15 to 10.05
Nyquist A/D converters 21.6.2018 & 22.6.2018 1.40 to 3.20
Flash converter 26.6.2018 11.10 to 12.50Two Stgae A/D
Converters 28.6.2018 2.30 to 3.20
Interpolating 2.7.2018 1.40 to 2.30A/D converters 3.7.2018 10.05 to 10.55Pipelined A/D
converter 6.7.2018 11.10 to 12.00
Time interleaved converters 9.7.2018 9.15 to 10.05
Over sampling converters 10.7.2018 11.10 to 12.00
Decimating & interpolating filters 13.7.2018 12.00 to 12.50
Delta sigma modulators 17.7.2018 11.10 to 12.00With multi bit
quantizers 19.7.2018 1.40 to 2.30
Delta sigma D/A 20.7.2018 9.15 to 10.05Delay considerations
in satellite systems 3/12/2018 9.15-10.05
Throughput considerations in satellite systems
3/14/2018 9.15-10.05
System considerations in satellite systems 3/16/2018 10.05-10.55
Frequency considerations in satellite systems
3/17/2018 10.05-10.55
Coverage considerations in satellite systems
3/19/2018 9.15-10.05
4Bit Ring counter design 10/7/2017 3.20 to 4.10
Counter applications 10/11/2017 1.40 to 2.30Johnson counter design 10/12/2017 11.10 to 12.00
MOD-N Asynchronous counters 10/12/2017 12.00 to 12.50
P.SIRISH KUMAR27
TV&SC (3rd B. Tech-II Sem) Sec-
BSF-26 A-Block / ECE
A-Block / VLSI SYSTEM DESIGN
SF-23MSID (M. Tech-II Sem)
28
DLD (2nd B. Tech-I Sem) Sec-
ASF-10 D-Block / CSE
ATTADA RAJESH
MOD-6 &MOD-8 asynchronous counters 10/13/2017 09.05 to 10.05
CO-Ordinate Systems 11/27/2017 12.00-12.50
Vector Calculus 11/28/2017 1.40-2.30Smith Chart 3/13/2018 12.00-12.50
Stub Matching 3/15/2018 1.40-2.30
Transient response 16.08.2017 12.00-12.50
Steady state response, errors, error constants 23.08.2017 1.40-2.30
DC servo motor 16.08.2017 12.00-12.50AC servo motor 16.08.2017 12.00-12.50
Lead-Lag Compensator 4.10.2017 12.00-12.50
Microwave Bands, Application 14.6.2017 12.00-12.50
Magic Tee 11.08.2017 1.40-2.30Two Cavity Klystrons 26.08.2017 12.00-12.50
Reflex Klystrons – Mathematical Theory
of Bunching,6.09.2017 1.40-2.30
TWT- Amplification Process 18.09.2017 12.00-12.50
8-Cavity Cylindrical Magnetron 26.09.2017 1.40-2.30
Issues in DIGITAL in integrated ckts 10/10/2017 9.15 to 10.05
Quality metrics 10/12/2017 1.40 to2.30Performance power 10/26/2017 2.30 to 3.20Dynamic conditions 10/30/2017 1.40 to 2.30
secondary effects 11/2/2017 2.30 to 3.20Intrinsic and extrinsic
semiconductors 10/11/2017 1.40 to 2.30
Drift and Diffusion currents 10/17/2017 9.15 to 10.05
Velocity saturation 10/17/2017 10.05 to10.55MOS capacitor surface
potential 10/24/2017 9.15 to 10.05
V-I Characteristics of MOSFET 10/25/2017 1.40 to 2.30
Low frequency ,High frequency
characteristics10/27/2017 12.00 to
Systems and models 3/7/2018 2.30 to 3.20Discrete event
simulation 3/13/2018 10.05 to10.55
simulation packages 4/2/2018 1.40 to 2.30Introduction to time
driven systems 4/19/2018 2.30 to 3.20
Discrete time markov process 6/25/2018 1.40 to 2.30
Basic organization of computer. 6/15/2017 11.10 to 12.00
Types of Bus structures, software,
performance measurements
6/27/2017 9.15 to 10.05
Hardware organization, Match
logic, Read and Write operations
8/26/2017 9.15 to 10.05
Cache memory, Associative and direct
mapping concepts9/19/2017 1.40 to 2.30
29
30
Smt.R.Kranthi
SF-25LCS (II–C B. Tech I Sem)
EMTL (II –C B. Tech II Sem)
MWE (IV –B B. Tech I Sem)
DICD (M. Tech-I Sem)
SDM (M. Tech-I Sem)
SMS (M. Tech-II Sem)
COA(III-B.Tech-A-Sem-I) SF-12
A-Block / Electronics and Communication
Engineering
A-Block / ECEFF-13
FF-23 A-Block / ECE
FF-23 A-Block / ECE
FF-23 A-Block / ECE
A-Block / ECE
K.KRISHNAM RAJU
SF-25 A-Block / ECE
Direct memory access, DMA controller, DMA
transfer10/5/2017 10.05 to 10.55
Pipeline: Parallel processing-concepts
and explanation10/5/2017 11.10 to 12.00
Pipelining concepts. Arithmetic pipeline, instruction pipeline
10/5/2017 1.40 to 2.30
Waveguide Multiport Junctions – E plane Tee 8/7/2017 11.10 to 12.00
O-type tubes: Two Cavity Klystrons 8/23/2017 9.15 to 10.05
TWT- Amplification Process 9/11/2017 10.05 to 10.55
M-type Tube: Magnetrons – Types 9/14/2017 2.30 to 3.20
Avalanche Transit Time Devices 10/4/2017 9.15 to 10.05
Optical Detectors-Physical Principle of
PIN and APD22.01.18 9.15 to 10.05
Types of dispersions- Material dispersion 2/5/2018 9.15 to 10.05
Optical receiver operation-fundamental
receiver operation2/12/2018 9.15 to 10.05
Digital signal transmission 2/15/2018 9.15 to 10.05
Point to Point links- System considerations 3/7/2018 10.05 to 10.55
Overview of fiber optic networks, Transreceiver
3/12/2018 11.10 to 11.55
Wavelength division MUX and DEMUX 3/19/2018 11.10 to 11.55
CDMA-Network 3/21/2018 10.05 to 10.55
Low voltage low power design 3/5/2018 10.5 to 10.55
Silicon on insulator 3/8/2018 1.40 to 2.30Advanced isolation
techniques 3/22/2018 12.00 to 12.50
Advanced MOSFET models 3/12/2018 10.5 to 10.55
Quasi- CBiCMOS 7/12/2018 1.40 to 2.30synchronous design
methodology 20.09.2017 9.15 to 10.05
Impediments to synchronous design. 23.09.2017 11.10 to 12.00
CPLD 8.10.2017 11.10 to 12.00FPGA 8.10.2017 12.00 to 12.50
Design considerations of PLDs with relevant
digital ICs.07.10.2017 11.10 to 12.00
Design of iterative circuits 10/26/2017 11.10 to 12.00
Introduction to ROM & PLA 10/26/2017 12.00 to 12.50
Design of sequential circuits using ROM 10/31/2017 11.10 to 12.00
Design of sequential circuits using PLA 10/31/2017 12.00 to 12.50
OCN(IV-B.Tech-B-Sem-II) FF-13
A-Block / Electronics and Communication
Engineering
MWE(IV-B.Tech-C-Sem-I) FF-12
A-Block / Electronics and Communication
Engineering
Engineering
A-Block / ECE
DSD&T(I M.Tech-Sem-I) FF-23
A-Block / Electronics and Communication
S .Umamaheswara Rao
31
SF- 26
32
FF- 23
P.Krishna Rao
A-Block / ECELP-VLSI (M. Tech-II Sem)
DICA (B. Tech-I Sem)
Introduction to FPGA &CPLD 11/2/2017 11.10 to 12.00
Design of sequential circuits using FPGA 11/2/2017 12.00 to 12.50
Design of sequential circuits using CPLD 11/7/2017 11.10 to 12.00
Embedded systems over view 10/6/2017 1.40 to 02.30
02.30 to3.2
Processor technology 10/9/2017 9.15 to 10.05Design technology 10/9/2017 10.05 to 10.55
Trade-offs 10/13/2017 1.40 to 02.302.30to
3.2sequential logic (RT
level) 10/16/2017 9.15 to 10.05
Custom purpose processor design (RT
level)10/16/2017 10.05 to 10.55
Optimizing custom single purpose
processors.10/20/2017 1.40 to 02.30
GENERAL PURPOSE
PROCESSORS Basic architecture
10/23/2017 9.15 to 10.05
Operations 10/23/2017 10.05 to 10.55Programmer's view 10/27/2017 1.40 to 02.30
2.30to3.2
(ASIPS)-Micro controllers 10/30/2017 9.15 to 10.05
ASIPS-Digital signal processors 10/30/2017 10.05 to 10.55
2.30to3.2
Priority inversion problem 1/8/2018 9.15 to 10.05
embedded operating systems 1/8/2018 10.05 to 10.55
Embedded Linux-Real-time 1/19/2018 1.40 to 02.30
2.30to3.2
Handheld operating sys Windows CE. 1/22/2018 1.40 to 02.30
8086 processor Architecture 21.11.17 2.30 pm to 4.10 pm
Read & write Timing Diagrams
5.12.17 & 6.12.17 2.30 pm to 4.10 pm
Instruction set 12.12.17 2.30 pm to 4.10 pmArchitecture of 80386
Processor 2.1.18 2.30 pm to 4.10 pm
Register organization 3.1.18 12 pm to 12.50 pmControl words of
8259A 30.1.18 2.30 pm to 4.10 pm
8255 PPI 1.2.18 9.15 to 10.05Control words of 8257 21.2.18 12 to 12.50
8279 key board controller 22.2.18 9.15 to 10.05
Control words of 8279 27.2.18 2.30 pm to 3.20 pmUSART 8251 27.2.18 3.20 pm to 4.10 pm
Interfacing programs 28.2.18 12 to 12.50Architecture 10.3.18 2.30 pm to 4.10 pm
Signal description 12.3.18 12 to 12.50Register set 13.3.18 9.15 to 10.05
MPMC (B. Tech-II Sem)
Engineering
34 D.V.L.N.Sastry
J.Swathi33
operating systems-RT Linux
SF-26
ERTS(I M.Tech-Sem-I)
10/13/2017
Development environment 10/27/2017
1/5/2018
1/19/2018
RTOS-Timers-Memory Management
A-Block / Electronics &
Communication Engineering
FF-23
A-Block / Electronics and Communication
Engineering
Design challenges 10/6/2017
Single purpose processors RT-level
Diode clippers 7/26/2017 11.10-12.00Transfer
characteristics of 7/29/2017 9.15-10.05
Transistor clippers 8/3/2018 11.10-12.00clipping at two
independent levels 8/4/2018 2.30-3.20
clamping circuits using diode with different
inputs8/17/2018 11.10-12.00
Principles and working of McLeod pressure
gauge – Various Calibration
08.12.2017 11.10 to 12.50
Dead Weight Tester 09.12.2017 12.00 to 12.50principle and
operation of Magnetic flow meter
09.01.2018 1.40to 2.30
principle and operation of Ultrasonic
flow meters19.01.2018 11.10 to 12.00
Load cells, Torsion meters 12.02.2018 9.15 to 10.05
Dynamometers, Stroboscope 16.02.2018 11.10 to 12.00
classification of control systems 20.02.2018 1.40to 2.30
Introduction to Root Locus 12.03.2018 9.15 to 10.05
8086 processor Architecture 14.6.17 10.05 to 10.55
Register organisation 16.6.17 9.15 to 10.55Signal description 19.6.17 1.40 to 2.30
PIN diagram 21.6.17 10.05 to 10.55Addressing modes 23.6.17 9.15 to 10.05
Assembler directives 23.6.17 10.05 to 10.55procedures 28.6.17 10.05 to 10.55MACROs 30.6.17 9.15 to 10.05
Read & write Timing Diagrams 30.6.17 10.05 to 10.55
Instruction set 12.07.17 10.05 to 10.55Instruction set 14.07.17 9.15 to 10.05
02.8.17&
04.08.17Signal description 09.08.17 10.05 to 10.55
Programmable interrupt controller
8259A04.9.17 1.40 to 2.30
Control words of 8259A 06.9.17 10.05 to 10.55
8255 control words 11.9.17 9.15 to 10.058257 DMA controller 13.9.17 10.05 to 10.55Interfacing 8257 to
8086 15.9.17 9.15 to 10.05
Key board / display controller 8279 15.9.17 10.05 to 10.55
USART 8251 18.9.17 1.40 to 2.30Interfacing 8251 to
8086 20.9.17 10.05 to 10.55
8051 Architecture 22.9.17 9.15 to 10.05
8051 Signal description 22.9.17 10.05 to 10.55
8051 PIN diagram 25.9.17 1.40 to 2.30Introduction to PIC
microcontroller 06.10.17 10.05 to 10.55
35
Architecture of 80386 Processor 10.05 to 10.55
B.Anilkumar
SF-22
C-Block / Electrical and Electronics Engineering
FF-07E-Block /
Mechanical Engineering
C-Block / Electrical & Electronics Engineering
PDC (B. Tech-I Sem)
ICS (B. Tech-II Sem)
MPMC (B. Tech-II Sem)
FF-12
Static characteristics: accuracy, resolution, precision, expected
value, error of instruments and
sensitivity.
28.06.17 9.15 to 10.05
Function Generators 03.08.17 9.15 to 10.05
Dual trace oscilloscope 24.08.17 9.15 to 10.05Digital storage
oscilloscope 30.8.17 9.15 to 10.05
Linear Variable Differential Transformer
27.09.17 9.15 to 10.05
Data acquisition systems. 12.10.17 9.15 to 10.05
Ex-OR and Ex-NOR Gates 3/19/2018 9.15-10.05
Carry Look Ahead Adder, Binary
Multiplier10/7/2017 3.20 to 4.10
PLA,Realization of Switching Functions
Using PLA,Programming
Tables of PLA
10/11/2017 1.40 to 2.30
JK, T and D Flip flops 10/12/2017 11.10 to 12.00Ring Counter,Johnson
Counter 10/12/2017 12.00 to 12.50
Principles and working of McLeod pressure
gauge – Various Calibration
07.12.2017 11.10 to 12.50
Dead Weight Tester 08.12.2017 10.05 to 10.55principle and
operation of Magnetic flow meter
11.01.2018 10.05 to 10.55
principle and operation of Ultrasonic
flow meters19.01.2018 10.05 to 10.55
SF-22 D-Block / Engineering
FF-15E-Block /
Mechanical Engineering
36 P.Kameswara Rao
SF-25A-Block /
CSE,EEE,MECH,CIVIL
IEM (II B. Tech I Sem)
DLD (B. Tech-I Sem)
ICS (B. Tech-II Sem)
Block Diagram of CRO 16.08.17 9.15 to 10.05
Load cells, Torsion meters 12.02.2018 9.15 to 10.05
Dynamometers, Stroboscope 15.02.2018 11.10 to 12.00
classification of control systems 15.02.2018 12.00 to 12.50
Introduction to Root Locus 12.03.2018 9.15 to 10.05
Static characteristics: accuracy, resolution, precision, expected
value, error of instruments and
sensitivity.
13.06. 2017 1.40 to 2.30
Function Generators 17.07. 2017 9.15 to 10.05Dual trace oscilloscope 21.08. 2017 9.15 to 10.05
Digital storage oscilloscope 23.8. 2017 1.40 to 2.30
Linear Variable Differential Transformer
22.09. 2017 9.15 to 10.05
Data acquisition systems. 06.10. 2017 9.15 to 10.05
Sampling theorem, Impluse sampling,
natural sampling and flat top sampling
9/15/2017 1:40 to 2:30
Reconstruction of signals from samples 9/19/2017 09:15 to 10:05
Effect of under sampling – aliasing 9/21/2017 10:05 to 10:55
Overview of fiber optic networks, Transreceiver
07.03.2018 9.15 to 10.05
Semiconductors optical amplifiers 08.03.2018 10.05 to 10.55
Couplers 12.03.2018 11.10 to 11.55Splicers 13.03.2018 9.15 to 10.05
Wavelength division MUX and DEMUX 14.03.2018 9.15 to 10.05
Filters 20.03.2018 9.15 to 10.05Isolators 21.03.2018 11.10 to 11.55
Optical switches 22.03.2018 10.05 to 10.55Basic fiber optic
networks 23.03.2018 10.05 to 10.55
WDM networks 26.03.2018 11.10 to 11.55Optical CDMA 27.03.2018 10.05 to 10.55
Wireless Communication
system(IV-ECE-A)
Wireless Communication
system(IV-ECE-A)
CMC(IV-ECE-A)
CMC(IV-ECE-C)
VLSI(IV-ECE-A)
VLSI(IV-ECE-C)
II EEE Resonant Circuits 9/22/2017 11.10 to 12.50 Seminar Hall
"C"BlockEEE
CS(II EEE-C) P,PI,PD,AD Controllers 11/12/2017 9.15 TO 10.55 SF-11 "C"Block
EEE
37 M. MURALIDHAR
39 B. JYOTHI
A-Block / ECE
38 L. SRIKANTH SS (II B.TECH. I SEMESTER) A/SF-22 A-Block / ECE
Silicon Technology 24.01.18
40 G.Tirumala Rao
IEEE 802.11 wireless lane 12.07.17 10.05 to 12.50
10.05 to 12.50
41 Dr. K.B.Madhu Sahu
10.05 to 12.50 FF-12
FF-08
A-Block / ECE
OCN(IV-B.Tech-C-Sem-II) FF-12
A-Block / Electronics and Communication
Engineering
FF-08
Silicon Technology 29.01.18
EMI (III –A B. Tech I Sem)
12.07.17 1.40 to 3.20 FF-08
Operation of cellular 20.12.17 10.05 to 12.50 FF-08
Handoff and dropped call 23.12.17 1.40 to 3.20 FF-12
Bluetooth
SF-16
ECA(II-EEE-A)
Applying superposition theorem,
Thevenins theorem
29/06/201705-07-2017
10.05 to 12.0001.40 to 02.30 SF-09 "C"Block
EEE
DCS(IV EEE-B)
Sampling theorem mapping between S-
plane and Z-plane 12/11/2017 12.00 to 12.50 SF-13 "C"Block
EEE
MCT (I- M.Tech) Lagrangian's equations for non liner systems19-08-2017 09.15 to 10.05 GF-01 "C"Block
EEE
EM_III(III-EEE-B)
Modern exitation systems for 3 phase
alternators13-07-2017 12.00 to 12.50 SF-13 "C"Block
EEE
CS(II EEE-A) P,PI,PD,AD Controllers 11/12/2017 10.05 to 12.50 SF-09 "C"Block
EEECS
(II EEE-B) P,PI,PD,AD Controllers 1/8/2018 10.05 to 12.50 SF-10 "C"BlockEEE
PS-I(II-EEE-B)
Single line Diagram Distribution Substation 9/18/2017 09.15 to 10.55 SF-10 "C"Block
EEEPS-III
(III EEE-B) Description and operation - air blast circuit breaker1/6/2018 10.05 to 10.55 SF-13 "C"BlockEEE
ECA(II-EEE-B)
Applying superposition theorem,
Thevenins theorem
03/07/201707-07-2017
09.15 to 10.0510.05-10.55 SF-10 "C"Block
EEE
EMFT(II EEE-C) Introuduction to vector 13-11-2017 11.10 to 12.00 SF-11 "C"Block
EEEPQM
(IV EEE-C) Harmonic filters 6/3/2018 11.10 to 12.00 FF-12 "C"BlockEEE
SSC-I(II EEE-B) WIND enerery 24-01-2018 11.10 to 12.00 SF-10 "C"Block
EEE
EM-III(III-EEE-C)
Blondel's 2- reaction theory
Constructional features of single fashe induction motor
05/08/201723-09-2017
02.30 to 03.2002.30 to 03.20 SF12 "C"Block
EEE
EMS(III-EEE-A)
Double element,3-element dynamometer wattmeter, expression
for deflecting and control torques
01-08-201705-08-2017
01.40 to 02.3009.15 to 10.05 SF14 "C"Block
EEE
COA(III EEE-A)
Explanation of high performance bus architecture, 5-
elements of bus designVirtual memory
29-11-201724-01-2018
02.30 to 03.2012.00 to 12.50 SF-14 "C"Block
EEE
HVDC(III EEE-B)
HVDC main components
Design of double tuned filters
30-11-201715-03-2018
10.05 to 10.5512.00 to 12.50 SF-13 "C"Block
EEE
ECA-I(II-EEE-C) Transients 10/3/2017 10.05 to 10.55 SF-11 "C"Block
EEERE
(IV-EEE-C) Solar Collectors 7/10/2017 11.10 to 12.00 FF-12 "C"BlockEEE
EM – II(II EEE-A) Starting methods of Induction motors12/20/2017 10.05 to 10.55 SF-09 "C"Block
EEE
UEE(IV EEE-C)
Defferent type of welding,Electric
Welding,Resistence,arc welding
1/25/2018 12.00 to 12.50 FF-12 "C"BlockEEE
PECDC(I-MTECH)
Design of current controller
Pulse with modulated current controller
20-11-201710-01-2018
11.10 to 12.0010.05-10.55 GF-01 "C"Block
EEE
HVE(IV-EEE-C)
Breakdown in composite delectricsElectrostatic copying
24-07-201704-10-2017
10.05-10.5511.10-12.00 FF-12 "C"Block
EEE
PE(III EEE-B)
Dynamic Characteristics of SCR
3-Phase inverter
01-12.201715-03-2018
09.15 to 10.052.30 to 3.20 SF-15 "C"Block
EEE
Sri CH.Krishna Rao
45 Sri S. Nagaraju
46 Sri B.B.Rath
47 Sri P.Balamurali
42 Dr.D.Vijaya kumar
43 Dr. Ch.Ravi Kumar
44 Sri B.Srinivasa Rao
48
HVDC(III EEE-C)
SIX Pulse converterGeneration of
Harmonics
06-12.201705-03-2018
09.15 to 10.0509.15 to 10.05 SF-16 "C"Block
EEE
S&S(III-EEE-A)
Interduction to Signals & Systems
Interduction to Signals & Systems
13-06-201715-06-2017
01.40 to 02.3010.05 to 10.55 SF-14 "C"Block
EEE
S&S(III-EEE-B)
Interduction to Signals & Systems
Interduction to Signals & Systems
14-06-201716-06-2017
11.10 to 12.0001.40 to 02.30 SF-13 "C"Block
EEE
PE(III EEE-C)
Introduction to Power Electronics and Semi
conductor devices
24-11-201725-11-2017
09.15 to 10.551.40 to 2.30 SF-12 "C"Block
EEE
NCESA(I-MTECH) Open cycle OTEC system 17-11-2017 11.10 to 12.00 GF-01 "C"Block
EEE
PSOC(IV-EEE-B)
Load Frequency of control of two area
systemFACTS Devices
07-09-201705-10-2017
10.05 to 10.5510.05 to 10.55 FF13 "C"Block
EEE
COA (III EEE-B)
Basic functional units of a computers
Arthematic pipeline
27-11-201715-03-2018
09.15 to 10.0511.10 to 12.00 SF13 "C"Block
EEE
SSC-II(III EEE-C)
Power system protection & Power
Electronic Applications23-11-2017 2.30 to 4.10 SF-12 "C"Block
EEE
APEC(I-MTECH) 3 phse boost PFC Converter 12/7/2017 11.10 to 12.00 GF-01 "C"Block
EEE
RE(IV-EEE-B)
Physics of sun and enveronmental impact
on solar powerPotential and sourses
of biomas
13-06-201728-07-2017
11.10 to 12.5011.10 to 12.50 FF-13 "C"Block
EEE
PQM(I M.Tech)
Introduction to Power Quality Issues & various standards
27-11-2017 09.15 to 10.05 GF-01 "C"BlockEEE
SSC-II(III EEE-B)
Power system protection & Power
Electronic Applications23-11-2017 2.30 to 4.10 SF-11 "C"Block
EEE
PSD(IV- EEE-A) Introduction to power semi conductor drives12/6/2017 11.10 to 12.50 FF-14 "C"Block
EEECOA
(III EEE-C)Evaluation of Computers & types of computers23-11-2017 2.30 to 4.10 SF-12 "C"BlockEEE
PS-I(II-EEE-A)
Single line Diagram Distribution Substation 9/26/2017 10.05 to 10.55 SF-09 "C"Block
EEEPQM
(IV EEE-B) Introduction to PQM 23-11-2017 09.15 to 10.05 FF-13 "C"BlockEEE
EM-I(II-EEE-C)
Constructional details of DC Machines,Charasteristics of Shunt series and
compund Generators
08-08-201722-08-2017
10.05 to 10.5510.05 to 12.00 SF-11 "C"Block
EEE
PSOC(IV-EEE-C) Modelling of speed governor system19-08-2017 11.10 to 12.00 FF-12 "C"Block
EEEEM-II
(II EEE-B) Starting methods of Induction motors27-11-2017 09.15 to 10.05 SF-10 "C"BlockEEE
EMMA(I-MTECH)
Voltage and torque of unsymmetrical two
phase induction machine in stationary
reference frame
12/26/2017 10.05 to 12.00 GF-01 "C"BlockEEE
EMS(III-EEE-B)
Polar type drysdale AC Potentiometer 9/27/2017 10.05 to 10.55 SF-13 "C"Block
EEE
PECAD(I M.Tech)
Modeling of PM brushless DC Motor
and drive scheme6/20/2018 09.15 to 10.05 GF-01 "C"Block
EEE
49 Sri. N.Tejeswara Rao
50 Sri B.Manmadha kumar
55 Sri R.Moulieswara Rao
51 Sri P.Guruvulu naidu
52 Sri I. Ramesh
53 Sri A.Jagannadham
54 Sri K. Suneel Goutham
PS-II(III-EEE-B)
Types of power system transients and
travellign waves on transimission lines
19-09-2017 9.15 to 10.05 SF-13 "C"BlockEEE
PSD(IV- EEE-B)
Closed loop operation DC motor drive &
Block diagram24-08-2017 9.15 to 10.05 FF-13 "C"Block
EEE
PQM(IV EEE-A) Generation of Harmonics 27-03-2018 09.15 to 10.55 FF-10 "C"Block
EEEEEE(I-IT) Constructional detials of DC Machines25-09-2017 9.15 to 10.55 FF-15 "B"Block
ITNA
(I-ECE-C) Introudcution to Electrical Circuits15-07-2017 10.55 to 12.00 SF-20 "A"BlockECE
EM-II(II EEE- C) Introduction to AC machines 30-11-2017 09.15 to 10.55 SF-11 "C"Block
EEE
S&S(III-EEE-C)
Analysis of Electrical Circuits
Introduction to fourier transforms
08-08-201719-08-2017
12.00 to 12.5011.10 to 12.00 SF-13 "C"Block
ECE
PSA(IV-EEE-C)
Gauss siedel MethodNe+D3352wton raphson Method
11-07-201719-07-2017
01.40 to 02.3001.40 to 02.30 FF-12 "C"Block
EEE
EMFT(II EEE-A) Introduction of Electro statics 28-11-2017 09.15 to 10.05 SF-09 "C"Block
EEE
EMFT(II EEE-B) Introduction of Electro statics 27-11-2017 10.05 TO 10.55 SF-10 "C"Block
EEEPS-II
(III-EEE-C) Types of Conductors, Types of Insulators.
14-06-201712-09-2017
9.15 to 10.0502.30 to 03.20 SF-12 "C"Block
EEE
EM-I(II-EEE-A)
Principle of operation of DC Machine
Principle of operation of 3 point starter
29-06-201708-08-2017
3.20 to 4.1012.00 to 12.50 SF-09 "C"Block
EEE
PS-II(II EEE-B)
Types of Conductors, Types of Insulators.
27-11-201715-03-2018
09.15 to 10.0511.10 to 12.00 SF-10 "C"Block
EEE
PSA(IV-EEE-A)
Introduction to fault analysis(Types of
faults)Concepts of
transient,Dynamic & Steady state stability
04/09/201718-09-2017
9.15 to 10.0510.05 to 10.55 FF-14 "C"Block
EEE
PS-II(III-EEE-A)
Types of Conductors, Types of Insulators.
13-06-201716-09-2017
3.20 to 4.1012.00 to 12.50 SF-14 "C"Block
EEE
58 Sri M.Bhaskara Rao
59 Sri.B.Ravi kumar
56 Sri K.Bhaskara Rao
57 Sri S.Kumara Swamy
PS-III(III EEE-A)
Description and operation - air blast
circuit breaker.Description and
operation - Minimum Oil circuit breaker.Description and
operation - vacuum circuit breaker.
Description and operation - SF6 circuit
breaker.Principles of arc
interruption.Principle of Operation
of attraction type Relays.
Principle of Operation of Induction Relays.
Principle of Operation of Over current Relays.Principle of Operation
of Differential, % Differential Relays.
01-12-201705-12-201706-12-201724-11-201722-12-201722-12-201702-01-201803-01-201805-01-2018
11.10 to 12.0009.15 to 10.0509.15 to 10.0511.10 to 12.0011.10 to 12.0012.00 to 12.5009.15 to 10.0509.15 to 10.0511.10 to 12.00
SF-14 "C"BlockEEE
PS-III(III EEE-C)
Description and operation - air blast
circuit breaker.Description and
operation - Minimum Oil circuit breaker.Description and
operation - vacuum circuit breaker.
Description and operation - SF6 circuit
breaker.Principles of arc
interruption.Principle of Operation
of attraction type Relays.
Principle of Operation of Induction Relays.
Principle of Operation of Over current Relays.Principle of Operation
of Differential, % Differential Relays.
24-11-201723-11-201730-11-201729-11-201721-11-201704-01-201806-01-201806-01-201811-01-2018
09.15 to 10.0509.15 to 10.0509.15 to 10.0502.30 to 03.2012.00 to 12.5002.30 to 03.2009.15 to 10.0510.05 to 10.5009.15 to 10.05
SF-15 "C"BlockEEE
ET(II-ECE-B) Principle & Operation of Generator19-07-2017 12.00 to 12.50 SF-13 "A"Block
ECEPS-II
(II EEE-A) Rigorous Method & their explanation22-04-2018 11.10 to 12.00 SF-09 "C"BlockEEE
OE (RES)(II EEE)Explanation of different types of solar plates13-04-2018 09.15 to 11.50 SF-09 "C"Block
EEESSC-II
(III EEE-A) Internet of things 15-04-2018 11.10 to 12.55 SF12 "C"BlockEEE
BECA(I-EEE-B)
Introduction to Electrical engineering
and Introduction to Electrical Major
components
8/7/2017 02.30 to 03.20 FF-10 "C"BlockEEE
STLD(I EEE-B) Flip flops and their conversions 9/4/2018 09.15 to 11.50 FF10 "C"Block
EEE
61 Sri T.Jaganmohana Rao
62 Sri K.Kanaka Raju
60 Sri B.Srikanth
BEE(I CIVIL-B)
Introduction to Electrical engineering
and Introduction to Electrical Major
components
8/1/2018 12.50 to 1.40 SF15 "E"BlockCIVIL
EDC(II-EEE-C) Semiconductor devices like BJT, IGBT,MOSFET30-06-2017 09.15 to 10.05 SF-11 "C"Block
EEE
EMS(III-EEE-C)
Expression for the extenstion range of Volt meter Ammeter
30-06-201701-07-2017
10.05 to 10.5001.40 to 02.30 SF-12 "C"Block
EEE
UEE(IV EEE-B)
Defferent type of welding,Electric
Welding,Resistence,arc welding
11/01/201816/01/2018
10.05 to 10.5511.10 to 12.00 FF-13 "C"Block
EEE
SSC-I(II EEE-C) Renewbale energy sources 24-03-2018 1.40 to 03.20 SF-01 "C"Block
EEE
HVE(IV-EEE-B)
Estimation of field stressess
Collision process and gases as insulating
mediaImpulse current
geneartion High voltage schering
bridge Electro static coating
19-06-201710-07-201726-08-201719-09-201707-10-2017
01.40 to 02.3001.40 to 02.3009.15 to 10.0510.05 to 10.5509.15 to 10.05
FF-13 "C"BlockEEE
RE(IV-EEE-A)
Phsics of the sunPyrhelio meter types
Principles of Bio conversion and
anaerobic digestionTypes of Geo thermal
resourcesMHD generators
30-06-201711-07-201722-08-201719-09-201706-10-2017
11.10 to 12.0012.00 to 12.5011.10 to 12.0011.10 to 12.0012.00 to 12.50
FF-14 "C"BlockEEE
UEE(IV EEE-A)
Temprature rise and heating time constant
derivation Direct and Indirect resistance heatingTypes of mercury
vapour lampsMechanics of train
movementSpecific energy
consumption
12-12-201710-01-201809-02-201805-03-201816-03-2018
10.05 to 10.5509.15 to 10.0510.05 to 10.5510.05 to 10.5510.05 to 10.55
FF-14 "C"BlockEEE
HVDC(III EEE-A)
Apparatus in HVDC system
Current and extinction angle control
Measurements of DC links, DC networks and DC convertersSurge arresters and
types of faults occurredTypes of AC filters
01-12-201720-01-201803-02-201803-03-201817-03-2018
03.20 to 04.1010.05 to 10.5510.05 to 10.5509.15 to 10.0510.05 to 10.55
SF-14 "C"BlockEEE
LDIC(III-EEE-B) Static and Dynamic RAM 9/29/2017 01.40 to 02.30 SF-13 "C"Block
EEELDIC
(III-EEE-C) Static and Dynamic RAM 10/4/2017 01.40 to 02.30 SF-12 "C"BlockEEE
STLD(I-EEE-B) Flip flops and their conversions17-04-2018 11.10 to 12.50 FF-10 "C"Block
EEE
PSA(IV-EEE-B)
Equal area criteriaAlgorithm for NR
method
22-08-201721-09-2017
11.10 to 12.0012.00 to 12.50 FF-13 "C"Block
EEE
ET(II-ECE-C)
Constructional details of Synchronus
Machines, 6/10/2017 10.10 to 10.50 SF-23 "A"BlockEEE
63 Sri CH.Prasad
64 Sri. Srinivasa Acharya
65 Sri. M.Mani Shankar
66 Sri. G.Ashok
FACTS(I M.Tech) Block diagram UPQC 17-03-2018 11.10 to 12.00
12.00 to 12.50 GF-01 "C"BlockEEE
EDC(II-EEE-A)
Comparasion of P-N Junction Diode,zener
diode,tunnel diode&LED
13-07-201717-07-2017
10.10 to 10.5012.00 to 12.50 SF09 "C"Block
EEE
EDC(II-EEE-B)
Comparasion of P-N Junction Diode,zener
diode,tunnel diode&LED
14-07-201717-07-2017
09.15 to 10.0510.10 to 10.50 SF-10 "C"Block
EEE
PE(III EEE-A)Dynamic Characteristics of SCR12/13/2017 11.10 to 12.00
12.00 to 12.50 SF14 "C"BlockEEE
SMPC(I M.Tech)Comparision of isolated converters3/22/2018 11.10 to 12.00
12.00 to 12.50 GF-01 "C"BlockEEE
EEE(I-CSE-A)
Principle of operation of DC Machine
Principle of operation of PMMC Instrument
05-09-201728-10-2017
10.05 to 10.5502.30 to 03.20 FF09 "D"Block
CSE
EEE(I-CSE-B)
Principle of operation of DC Machine
Principle of operation of PMMC Instrument
05-09-201728-10-2017
11.10 to 12.0009-15. to 10.05 FF-10 "D"Block
CSE
BEE(I MECH-A)
Principle of operation of DC Machine
Principle of operation of PMMC Instrument
01-02-201828-03-2018
11.10 to 12.0012.00 to 12.50 FF27 "E"Block
MECH
BEE(I CIVIL-A)
Principle of operation of DC Machine
Principle of operation of PMMC Instrument
03-02-201830-03-2018
03.20 to 04.1009.15 to 10.05 SF-10 "E"Block
CIV
MATLab(II-EEE-B)
MAT LAB windows, MAT LAB commands, Vectors Operation in MAT LAB, Matrics
operation in MAT LAB
05-07-201706-07-201726-07-201727-07-2017
09-15. to 10.0509-15. to 10.0509-15. to 10.0509-15. to 10.05
SF-11 "C"BlockEEE
STLD(I EEE-A)
Flip flops and their conversions 17-04-2018 09.15 to 11.00 FF-09 "C"Block
EEE
PS-II(II EEE-C)
Types of conductors,Types of Insulators,
string effiency & voltage distirbution
among discs
08-12-201704-12-201712-03-2018
09.15 to 10.0509.15 to 10.05,12.00 to 12.50
SF-11 "C"BlockEEE
NA(I-ECE-A) Introudcution to Electrical Circuits15-07-2017 10.55 to 12.00 SF-18 "A"Block
ECENA
(I-ECE-B) Introudcution to Electrical Circuits21-07-2017 12.00 TO 12.50 SF-19 "A"BlockECE
BEE(I MECH-B)
Principle of operation of DC Machine
Principle of operation of PMMC Instrument
10-02-201823-03-2018
11.10 to 12.0012.00 to 12.50 FF-25 "E"Block
MECH
OE (RES)(II EEE)Explanation of different types of solar plates13-04-2018 09.15 to 11.50 SF-10 "C"Block
EEE EM-I
(II-EEE-B) Armature Reaction
commutation24-07-201731-07-2017
01.40 to 02.3001.40 to 02.30 SF-10 "C"Block
EEE
PSD(IV- EEE-C)
Single Phase dual converter in circulating
and non circulating current modes
20-07-2017 09-15. to 10.05 FF-12 "C"BlockEEE
ADS(I M.Tech) A / D and D / A conversion 22-03-2018 01.40 to 02.30 GF-01 "C"Block
EEE
II EEE-A Construction of DC Machines 7/21/2017 03.20 to 04.10 SF-09 "C"Block
EEE
II-EEE-BParallel operation of DC Generators12/29/2017 03.20 to 04.10 SF-10 "C"BlockEEE
70 Sri. Y.Santosh
71 Sri. M.V.V.Appala Naidu
72 Sri. Srinivas Muddada
67 Sri. T. Lokandha Rao
68 Smt. N.Sowjanya
69 Sri. T.Manmadha rao
II EEE-B Applications of DC Machines 7/22/2017 03.20 to 04.10 SF10 "C"Block
EEE
II-EEE-C Types of DC Generators 12/28/2017 03.20 to 04.10 SF-11 "C"BlockEEE
PSOC(IV- EEE-A)
Isolated block diagram of single area 8/19/2017 09.15 to 10.05
10.05 to 10.55 FF-14 "C"BlockEEE
EM-III(III-EEE-A)
Regulation of alternators 7/13/2017
11.10 TO 12.0012.00 to 12.50 FF-14 "C"Block
EEE
DCS(IV EEE-C)
Sampling theorem mapping between S-
plane and Z-plane
11-12-201731-01-2018
11.10 to 12.0011.10 to 12.00 FF-12 "C"Block
EEE
DCS(IV EEE-B)
Sampling theorem mapping between S-
plane and Z-plane
11-12-201708-01-2018
10.05 to 10.5510.05 to 10.55 FF-13 "C"Block
EEE
LDIC(III-EEE-A) Static and Dynamic RAM 9/27/2017 01.40 to 02.30 SF-14 "C"Block
EEEBEE
(I-Civil-A)Intorduction toElectrical Engineering12/11/2017 10.05 to 10.55 SF-10 "E"BlockCE
BECA(I-EEE-A)
Resonance frequency & relationship between bandwidth and power factor for series RLC
circuit
5/12/2017 2.30 to 4.10 FF-09 "C"BlockEEE
EEE(I-CSE-C) Construction of DC Machines 10/9/2017 12.00 TO 12.50 FF-09 "D"Block
CSE
PQM(IV EEE-B)
Introduction to Power Quality Issues & various standards
4/12/2017 11.10 TO 12.00 FF-13 "C"BlockEEE
HVE(IV-EEE-A)
Breakdown of solid delectrics
Electrostatic copying 7/25/2017 09.15 to 10.05 FF-14 "C"Block
EEE
PS-I(II-EEE-C)
Single line Diagram Distribution Substation 9/26/2017 12.00 to 12.50 SF-11 "C"Block
EEE
PQM(IV EEE A)
Introduction to Power Quality Issues & various standards
4/12/2017 09.15 to 10.05 FF-14 "C"BlockEEE
IV-EEE-B Switched relucantance motors 8/17/2017 03.20 to 04.10 FF-13 "C"Block
EEE
IV-EEE-C WinD enerery Systems 11/11/2017 03.20 to 04.10 FF-12 "C"BlockEEE
IV-EEE-A BLDC Motor 8/2/2017 03.20 to 04.10 FF-14 "C"BlockEEE
IV-EEE-A Solar Energy Systems 2/16/2018 03.20 to 04.10 FF-14 "C"BlockEEE
6/28/2017 11.10 to 12.506/29/2017 11.10 to 12.50
Generator Transformer - CGPL (5X800) MW
Power Plant2/9/2018 09.15 to 10.55
Switchyard for typical (2X300) MW Power
Plant12/8/2017 09.15 to 10.55
Electro Static precipitator 6/19/2017 11.10 to 12.50
Applications of VFD Drives 6/20/2017 11.10 to 12.50
IV-EEE Intorduction to PLC'S 12/15/2017 11.10 to 12.50 Seminar Hall
"C"BlockEEE
Energy conservation in lighting 7/24/2017 11.10 to 12.50
Efficient domesitc use of Electricity 7/25/2017 11.10 to 12.50
II-EEE Transformer Protection 2/17/2018 11.10 to 12.50 Seminar Hall
"C"BlockEEE
79 Sri.D.Sagar Kumar
80 Sri.B.Srinivas
IV-EEE
82 Sri.R.V.Ramana RaoIV-EEE "C"Block
EEE
Seminar Hall
Seminar Hall
Seminar Hall
Seminar Hall
Trends and future for thermal power plant
"C"BlockEEE
II-EEE "C"BlockEEE
81 Sri.Ch.Srinivas NaiduIV-EEE "C"Block
EEE
73 Smt.M.Naveena
74 Dr.K.Kiran Kumar
75 Sri. A.Vandan Raj Kamal
76 Sri. K.Ashok Kumar
77 Dr.M.Murali
78 Sri.P.PalgunaRao
Unit-1:Section 80 of the IT Act,2000 12.07.2017 11.10-12.00
Cognizable Vs Non-Cognizable officers 14.07.2017 11.10-12.00
Unit-II: Hacking 21.07.2017 11.10-12.00Teenage web
Vandalism 21.07.2017 12.00-12.40
Cyber Fraud and Cyber Cheating 01.08.2017 11.10-12.00
Virus on Internet 01.08.2017 12.00-12.40Defamation,
harassment and E-mail abuse
08.08.2017 12.00-12.40
Unit-III: Impact of Internet on custom
duties17.08.2017 11.10-12.00
Impact of Internet on custom duties 17.08.2017 12.00-12.40
Taxation Policies in India 22.08.2017 11.10-12.00
Taxation Policies in India 22.08.2017 12.00-12.40
Unit-IV: Introduction to digital signatures 05.09.2017 11.10-12.00
Digital Signature Certificates 05.09.2017 12.00-12.40
Certificate Authorities and Liabilities in the
event of digital signatures
08.09.2017 12.00-12.40
Unit-V:Goods and Services 22.09.2017 11.10-12.00
Goods and Services 22.09.2017 12.00-12.40Consumer Complaint 26.09.2017 11.10-12.00
Defect in Goods and Deficiency in Services 26.09.2017 12.00-12.40
Unit-I: Data Preprocessing 25-11-2017 1.40 to 2.30
Measures of similarity and Dissimilarity:
Basics,27-11-2017 2.30 to 3.20
similarity and dissimilarity between
simple attributes,28-11-2017 10.05 to 10.55
dissimilarities between data objects,
similarities between data objects,
29-11-2017 1.40 to 02.30
Exploring data: Data set, summary statistics 11/12/2017 02.30 to 03.20
09.15 to
10.05
10.05 to
10.55Analysis of Attribute
Relevance, 03.01.2018 01.40 to 2.30
Mining Class Comparisons: Discriminating
between Different Classes
04.01.2018 11.10 to 12.00
DWDM
Dr. G S N Murty83
Cyber Laws (IV B.Tech CSE-C
Section-I Semester)
FF-17
D-Block / Computer Science
Engineering
Unit-II: Data Generalization and
Summarization-Based Characterization
02.01.2018
Data Generalization and Summarization-
Based Characterization02.01.2018
D-Block / Computer
Unit-III: frequent item set generation in the Apriori algorithm
22.01.2018 2.30 to 3.20
candidate generation and pruning 22.01.2018 3.20 to 4.30
FP–Growth algorithm 29.01.2018 2.30 to 3.20FP–Growth algorithm 29.01.2018 3.20 to 4.30
Unit-IV:Classification by
Decision Tree Induction
Classification by Decision Tree
Induction17.02.2018
Bayesian Classification 20 & 21.02.2018 10.05 to 10.55 & 1.40 to 02.30
Rule Based Classification 27.02.2018 9.15 to 10.05
Classification by Back propagation 28.02.2018 10.05 to 10.55
Evaluating the Accuracy of a
Classifier06.03.2018 9.15 to 10.05
Unit:VK-Means ExampleBisecting K-Means 13.03.2018 10.05 to 10.55
Agglomerative hierarchical clustering 13.03.2018 3.20 to 4.30
DB-SCAN 16.03.2018 1.40-02.30DB-SCAN 17.03.2018 10.05 to 10.55
Data Communication, 13-06-17 1.40 to 2.30Distributed
Processing, Network Criteria, Physical
Structures.
14-06-17 2.30 to 3.20
Network Models, Categories of Networks
Inter Connection of Networks.
The Internet: Briefly History, Internet today 16-06-17 10.05 to 10.55
Protocols, Standards, Standard Organization,
Internet Standards.20-06-17 1.40 to 2.30
Layered Tasks: Sender, Receiver, Carrier, Hierarchy.
21-06-17 2.30 to 3.20
The OSI Models: Layered Architecture, peer to peer process,
Encapsulation.
22-06-17 9.15 to 10.05
Layers in OSI Physical, Data Link,
Network Layers.23-06-17 10.05 to 10.55
Transport, Session, Presentation,
Application Layers.27-06-17 1.40 to 2.30
TCP/IP Protocol Suite: Physical, Data Link, Network, Transport, Application Layers
28-06-17 2.30 to 3.20
DWDM (III B.Tech CSE-
C-II Semester)
15-06-17 9.15 to 10.05
14.02.2018 01.40 to 02.30
13.03.2018 9.15 to 10.05
Computer Science
Engineering
SF-17
Addressing: Physical Address, Logical
address, Port Address, Specific Address.
29-06-17 9.15 to 10.05
Data Link Layer: Design Issues- Service Provided to Network
layer, Framing
30-06-17 10.05 to 10.55
Error Control and Flow Control. 11/7/2017 1.40 to 2.30
Error Correction and Correcting Codes. 12/7/2017 2.30 to 3.20
Error Detection and Detecting Codes 12/7/2017 9.15 to 10.05
Elementary Data Link protocols 13-07-17 10.05 to 10.55
Sliding Window Protocol. 14-07-17 1.40 to 2.30
A Protocol Using Go Back N. 18-07-17 2.30 to 3.20
A Protocol using Selective Repeat, High
Level Data Link Control.
19-07-17 9.15 to 10.05
MAC Sub Layer, Pure, Slotted Aloha 20-07-17 10.05 to 10.55
CSMA Protocols, 21-07-17 1.40 to 2.30Collision Free Protocol
CCMA- CD 25-07-17 2.30 to 3.20
Limited Contention Protocols. WDMA
Protocols.26-07-17 9.15 to 10.05
LAN Bridges: Transparnt bridges,
Source Routing Bridges, Remote
Bridges.
27-07-17 10.05 to 10.55
Network Layer Design Issues- Service Provided to the transport Layer.
8/8/2017 1.40 to 2.30
Connection Less and Connection Oriented
Services.9/8/2017 2.30 to 3.20
Virtual Circuit and Datagram Subnet 10/8/2017 9.15 to 10.05
Routing Algorithms-The Optimally
Principle, Shortest Path Routing
17-08-17 10.05 to 10.55
Flooding, Distance Vector Routing 18-08-17 1.40 to 2.30
Link State Routing. 22-08-17 2.30 to 3.20Hierarchical Routing, 23-08-17 9.15 to 10.05
Broadcast Routing 23-08-17 10.05 to 10.55Multi Cast Routing. 24-08-17 1.40 to 2.30Congestion Control
Algorithms, 29-08-17 2.30 to 3.20
General Principles of Congestion Control, 30-08-17 9.15 to 10.05
Congestion Prevention Policies. 31-08-17 10.05 to 10.55
IP Protocol, IP addresses, CIDR, NAT 1/9/2017 1.40 to 2.30
IPV4, IPV6 6/9/2017 2.30 to 3.20
CN (B. Tech-I Sem) SF-17
D-Block / Computer
Science and Engineering
The Transport Services- Services
Provided to the Upper Layer.
7/9/2017 9.15 to 10.05
Transport service Primitives 12/9/2017 10.05 to 10.55
Elements of transport protocols 13-09-17 1.40 to 2.30
Addressing, Connection
Establishment14-09-17 2.30 to 3.20
Connection Release 15-09-17 9.15 to 10.05Flow control and
Buffering 19-09-17 10.05 to 10.55
Multiplexing 20-09-17 1.40 to 2.30Crash Recovery 21-09-17 2.30 to 3.20
UDP format and operations 22-09-17 9.15 to 10.05
TCP services, features and Segment format 26-09-17 10.05 to 10.55
DNS, Name Space 27-09-17 1.40 to 2.30Resource Records 3/10/2017 2.30 to 3.20
Name Servers, SNMP 4/10/2017 9.15 to 10.05Electronic Mail,
Architecture 5/10/2017 10.05 to 10.55
Services, User Agent 6/10/2017 1.40 to 2.30Date base System
Applications 27-11-17 11.10 to 12.00
Data base System vs File System. 28-11-17 11.10 to 12.00
View of data, Data Abstraction 29-11-17 11.10 to 12.00
Instances and Schemas 30-11-17 9.15 to 10.05Data Models: ER Model, Relational,
other Models4/12/2017 11.10 to 12.00
Data base Languages DDL, DML, DCL 5/12/2017 11.10 to 12.00
Data base Access for Applications Programs 6/12/2017 11.10 to 12.00
Data base users and Administrators,
Transaction Management
7/12/2017 11.10 to 12.00
Data base System Structure: Storage
Manager, The Query Processor
11/12/2017 11.10 to 12.00
History of Data base Systems 12/12/2017 11.10 to 12.00
Data base design and ER diagrams 13-12-17 9.15 to 10.05
Beyond ER Design Entities Attributes and
Entity Sets 14-12-17 11.10 to 12.00
Relationships and Relationship sets 18-12-17 11.10 to 12.00
Additional features of ER Model 19-12-17 11.10 to 12.00
Conceptual Design with the ER Model 20-12-17 9.15 to 10.05
Conceptual Design for Large enterprises 21-12-17 11.10 to 12.00
Introduction to the Relational Model 2/1/2018 11.10 to 12.00
Integrity Constraints Over relations 3/1/2018 11.10 to 12.00
Enforcing Integrity Constraints 4/1/2018 9.15 to 10.05
Introduction to Views, Destroying/ altering
Tables and Views8/1/2018 11.10 to 12.00
Relational Algebra – Selection and projection set
operations
9/1/2018 11.10 to 12.00
Renaming, Joins and Division 10/1/2018 11.10 to 12.00
Form of Basic SQL Query
Examples of Basic SQL Queries
Introduction to Nested Queries Correlated
Nested Queries.18-01-18 11.10 to 12.00
Set – Comparison Operators 29-01-18 11.10 to 12.00
Aggregative Operators 30-01-18 11.10 to 12.00NULL values –
Comparison using Null values
31-01-18 9.15 to 10.05
Logical Connectivity AND,OR,NOT 1/2/2018 11.10 to 12.00
Impact on SQL Constructs 5/2/2018 11.10 to 12.00
Outer Joins, Disallowing NULL
values6/2/2018 11.10 to 12.00
Complex Integrity Constraints in SQL 7/2/2018 9.15 to 10.05
Triggers and Active Data bases 8/2/2018 11.10 to 12.00
Schema refinementProblems Caused by
redundancy Decompositions –
Problem relatedto decomposition,
Reasoning about FDS1st, 2nd, 3rd Normal
forms, BCNF14-02-18 9.15 to 10.05
Lossless join DecompositionDependency preserving
DecompositionSchema refinement in
Database Design 19-02-18 11.10 to 12.00
Multi valued Dependencies,4th
Normal Form20-02-18 11.10 to 12.00
Transaction Concept- Transaction State 21-02-18 9.15 to 10.05
Implementation of Atomicity and
Durability Concurrent Executions:
Serializability, Recoverability
22-02-18 11.10 to 12.00
Implementation of Isolation, Testing for serializability, Lock
–Based Protocols
26-02-18 11.10 to 12.00
11/1/2018 9.15 to 10.05
12/2/2018 11.10 to 12.0084
13-02-18 11.10 to 12.00
15-02-18
Prof. D.T.V. Dharmajee Rao
DBMS (B. Tech-II Sem)
11.10 to 12.00
SF-09
D-Block / Computer and
Science Engineering
Timestamp Based Protocols, Validation
Based Protocols, Multiple Granularity
27-02-18 11.10 to 12.00
Recovery and Atomicity: Log Based
Recovery28-02-18 9.15 to 10.05
Recovery with Concurrent Transactions
Buffer ManagementFailure with loss of non volatile storage Advance Recovery
systemsRemote Backup
systemsData on External
Storage: File Organization and Indexing, Cluster
Indexes
6/3/2018 11.10 to 12.00
Primary and Secondary Indexes 7/3/2018 9.15 to 10.05
Index data Structures, Hash Based Indexing, Tree based Indexing, Comparison of File
Organizations
8/3/2018 11.10 to 12.00
Indexes and Performance Tuning, Tree Indexes Indexed
Sequential Access Methods (ISAM) B+
Trees
12/3/2018 11.10 to 12.00
Introduction to database security and authorization, access
control
13-03-18 11.10 to 12.00
Discretionary access control
Mandatory access control
Security for Internet applications 15-03-18 11.10 to 12.00
Introduction to Data Mining,what is Data
Mining21-11-17 09.15 to 10.05
Motivating challenges, Origins of Data
Data Mining Tasks 23-11-17 11.10 to 12.00Data Mining Tasks 25-11-17 10.05 to 10.55
Types of Data-attributes and measurements
28-11-17 09.15 to 10.05
Types of data sets, Data Quality 29-11-17 01.40 to 02.30
Data Pre-processing 30-11-17 11.10 to 12.00Similarity and
dissimilarity between simple attributes
5/12/2017 10.05 to 10.55
Dissimilarities between data objects, Similarities between
data objects
6/12/2017 09.15 to 10.05
5/3/2018 11.10 to 12.00
14-03-18 9.15 to 10.05
22-11-17 01.40 to 02.30
01--03-18 11.10 to 12.00
Examples of proximity measures 7/12/2017 01.40 to 02.30
Similarity measures for binary data Jaccard
coefficient, Cosine similarity, Extended Jaccard Coefficient,
Correlation
12/12/2017 11.10 to 12.00
Exploring data: Data set, summary statistics 13-12-17 10.05 to 10.55
Data Warehouse and OLAP Technology: 14-12-17 09.15 to 10.05
Data warehouse Multidimensional Data
Model16-12-17 01.40 to 02.30
Data Warehouse Architecture 19-12-17 11.10 to 12.00
Data warehouse implementation 20-12-17 10.05 to 10.55
Concept Description 2/1/2018 09.15 to 10.05Characterization and
Comparison 3/1/2018 01.40 to 02.30
Data Generalization and
Summarization-Based Characterization
Analytical Characterization 6/1/2018 10.05 to 10.55
Analysis of Attribute Relevance, 9/1/2018 09.15 to 10.05
Mining Class Comparisons
Discriminating between Different
ClassesAssociation analysis problem definition 11/1/2018 11.10 to 12.00
Frequent item–set generation. 18-01-18 10.05 to 10.55
The apriori principle frequent item set generation in the Apriori algorithm
20-01-18 09.15 to 10.05
candidate generation and pruning 23-01-18 01.40 to 02.30
support counting (excluding support
counting using a Hash tree),
24-01-18 11.10 to 12.00
Rule generation compact
representation of frequent item sets
FP–Growth algorithm 27-01-18 09.15 to 10.05Classification and Prediction: Issues
Regarding Classification and
Prediction
30-01-18 01.40 to 02.30
Classification by Decision Tree
Induction31-01-18 11.10 to 12.00
Attribute selection measures 1/2/2018 10.05 to 10.55
Examples 3/2/2018 09.15 to 10.05Underfitting and
Overfitting 6/2/2018 01.40 to 02.30
10/1/2018 01.40 to 02.30
25-01-18 10.05 to 10.55
4/1/2018 11.10 to 12.00
DWDM (B. Tech-II Sem) SF-20
D-Block / Computer and
Science Engineering
Bayesian Classification 7/2/2018 11.10 to 12.00Examples 13-02-18 10.05 to 10.55
Bayesian Belief Networks 14-02-18 09.15 to 10.05
Rule-Based Classification 15-02-18 01.40 to 02.30
Classification by Back propagation 17-02-18 11.10 to 12.00
Prediction and Regression Analysis 20-02-18 10.05 to 10.55
Accuracy and Error Measures 21-02-18 09.15 to 10.05
Evaluating theAccuracy of a
Classifier or PredictorIncreasing the
Accuracy 24-02-18 11.10 to 12.00
Ensemble Methods 27-02-18 10.05 to 10.55Cluster Analysis types
of clustering 28-02-18 09.15 to 10.05
Basic K–means 6/3/2018 01.40 to 02.30K-means additional
issues, 7/3/2018 11.10 to 12.00
bisecting k meansk-means and different
types of clusters,strengths and weaknesses 10/3/2018 09.15 to 10.05
k-means as an optimization problem 13-03-18 01.40 to 02.30
Agglomerative hierarchical clustering 14-03-18 11.10 to 12.00
basic agglomerative hierarchical clustering
algorithm15-03-18 10.05 to 10.55
specific techniques 17-03-18 09.15 to 10.05DBSCAN: traditional
density 20-03-18 01.40 to 02.30
centre–based approach, strengths
and weaknesses21-03-18 11.10 to 12.00
Fundamental Steps in image processing 28-02-18 1.40 to 2.30
Components of image processing system 28-02-18 2.30 to 3.20
Image Sampling 3/1/2018 1.40 to 2.30Image quantization 3/1/2018 1.40 to 2.30
Digital image representation 3/7/2018 1.40 to 2.30
Spatial and gray level resolutions 3/7/2018 1.40 to 2.30
Zooming and shrinking of images 3/8/2018 1.40 to 2.30
Basic relationship between pixels 3/8/2018 1.40 to 2.30
Distance operations 15-03-18 1.40 to 2.30Image operations 15-03-18 1.40 to 2.30Basic gray level transformations 21-03-18 1.40 to 2.30
Image negatives, transformations 21-03-18 1.40 to 2.30
Contrast stretching 22-03-18 1.40 to 2.30Gray level slicing 22-03-18 1.40 to 2.30
Histogram processing 28-03-18 1.40 to 2.30ALU operations 28-03-18 1.40 to 2.30
Smoothing filters 29-03-18 1.40 to 2.30Sharpening filters 29-03-18 1.40 to 2.30
22-02-18 01.40 to 02.30
8/3/2018 10.05 to 10.55
Fundamentals of morphology 4/11/2018 1.40 to 2.30
Erosion and dilation 4/11/2018 1.40 to 2.30Opening and closing 4/12/2018 1.40 to 2.30Hit or miss transform 4/12/2018 1.40 to 2.30Boundary extraction 18-04-18 1.40 to 2.30
Region filling, Extraction of
connected components18-04-18 1.40 to 2.30
Convex hull, Skelton 19-04-18 1.40 to 2.30Pruning, Gray scale
morphology 19-04-18 1.40 to 2.30
Detection of discontinuaties 5/2/2018 1.40 to 2.30
Point, line, edge detection 5/2/2018 1.40 to 2.30
Edge linking 5/3/2018 1.40 to 2.30Boundary detection 5/3/2018 1.40 to 2.30
Local processing 6/6/2018 1.40 to 2.30Global processing 6/6/2018 1.40 to 2.30Graph theoretic
techniques 6/7/2018 1.40 to 2.30
Thresholding-global 6/7/2018 1.40 to 2.30Adaptive thresholding 13-06-18 1.40 to 2.30Optional global and adaptive thresholding 13-06-18 1.40 to 2.30
Thresholding based on several variables 14-06-18 1.40 to 2.30
Region based segmentation 14-06-18 1.40 to 2.30
Image compression fundamentals 20-06-18 1.40 to 2.30
Types and requirements 20-06-18 1.40 to 2.30
Coding redundancies 21-06-18 1.40 to 2.30Interpixel redundancy 21-06-18 1.40 to 2.30
Psychovisual redundancy 27-06-18 1.40 to 2.30
Fidelity criteria 27-06-18 1.40 to 2.30Image compression
models 28-06-18 1.40 to 2.30
Color image processing
fundamentals7/5/2018 1.40 to 2.30
Color models 7/11/2018 1.40 to 2.30RGB model 7/11/2018 1.40 to 2.30HIS-model 18-07-18 1.40 to 2.30
Color transformation 18-07-18 1.40 to 2.30Color complements 19-07-18 1.40 to 2.30Color slicing tone,
color correction 19-07-18 1.40 to 2.30
Psedocode conversion 13-06-17 10.05 to 10.55Disjoint sets-
operation- union-find 7/10/2017 11.10 to 12.00
Connected components and bi-connected
components6/10/2017 12.00 to 12.50
Graph algorithm with Implementation issues 7/11/2017 9.15 to 10.05
DFS and its applications 7/11/2017 10.05 to 10.55
Shortest path and spanning tree problems 18-07-17 9.15 to 10.05
Divide and conquer general method 18-07-17 10.05 to 10.55
Dr. Ch. Ramesh
DIP (1st M. Tech-II Sem)
SF-12
D-Block / Computer Science
Engineering
85
Binary-Search-Algorithm 31-07-17 11.10 to 12.00
Quick sort-problem-Algorithm 8/1/2017 9.15 to 10.05
Stressens matrix multiplication 8/7/2017 11.10 to 12.00
Greedy method-general method 8/7/2017 12.00 to 12.50
Prims Algorithm 17-08-17 11.10 to 12.00Kruskal algorithm 17-08-17 12.00 to 12.50
Dynamic programming-general
method18-08-17 12.00 to 12.50
Optimal binary search tree 21-08-17 11.10 to 12.00
Optimal binary search tree 22-08-17 9.15 to 10.05
Back tracking-general method 9/4/2017 11.10 to 12.00
n-Queen problem Algorithm 9/4/2017 12.00 to 12.50
Algorithm for n-Queen problem 9/5/2017 9.15 to 10.05
Algorthm for sum of subsets problem 9/5/2017 10.05 to 10.55
Graph-coloring Algorithm 9/11/2017 11.10 to 12.00
Hamiltonian Cycle-Algorithm 9/11/2017 12.00 to 12.50
Introduction strings alphabet, languages 28-11-17 11.10 to 12.00
DFA, different notations 28-11-17 12.00 to 12.50
NFA-different notations 12/1/2017 9.15 to 10.05
Conversion of NFA to DFA 12/8/2017 9.15 to 10.05
NFA with E-moves & E- closure 12/12/2017 11.10 to 12.00
Conversion of NFA with E-into without E
moves12/12/2017 12.00 to 12.50
Equivalence of two finite automata 16-12-17 9.15 to 10.05
Minimization of finite automata 19-12-17 11.10 to 12.00
Finite automata with output 19-12-17 12.00 to 12.50
Regular sets & Regular expressions 1/2/2018 11.10 to 12.00
Identity rules 1/2/2018 12.00 to 12.50FA to RE conversion 1/4/2018 10.05 to 10.55RA to FE conversion 1/5/2018 9.15 to 10.05
Closure properities of regular sets 1/6/2018 11.10 to 12.00
Pumping lemma for regular sets 1/6/2018 12.00 to 12.50
Regular grammars RLG and LLG 1/7/2018 9.15 to 10.05
Conversion of FA into R.G 1/7/2018 10.05 to 10.55
Conversion of R.G. into FA 1/9/2018 12.00 to 12.50
Context free grammar 19-01-18 10.05 to 10.55Derivation trees 23-01-18 12.00 to 12.50
Minimization of CFG 27-01-18 11.10 to 12.00
Dr. Ch. Ramesh
DAA (3rd B. Tech-I Sem)
FLAT (2nd B. Tech-II Sem)
SF-10
D-Block / Computer Science
Engineering
85
Enumeration Proprieties 2/6/2018 11.10 to 12.00
PDA, defeition model 2/6/2018 12.00 to 12.50Acceptance by final
state 2/9/2018 9.15 to 10.05
Acceptance by empty stock 16-02-18 9.15 to 10.05
Equivalance of CFL and PDA 16-02-18 11.10 to 12.00
Equivalance of empty stack & final state 20-02-18 11.10 to 12.00
Conversion of PDA empty stack from final
state27-02-18 11.10 to 12.00
Turing machine-model 3/9/2018 9.15 to 10.05Types of Turing
machines 3/9/2018 1.40 to 2.30
Recursively enumerable languages 13/3/2018 11.10 to 12.00
Computable Machine 13/3/2018 12.00 to 12.50Chomsky hierarchy of
languages 16-03-18 9.15 to 10.05
Port correspondance problem 16-03-18 10.05 to 10.55
Universal Turing Machine 20-03-18 11.10 to 12.00
Psuedo code for expressing algorithms 13-06-17 9.15 to 10.05
Performance Analysis 14-06-17 11.10 to 12.00Space complexity 15-06-17 1.40 to 2.30Time complexity 16-06-17 11.10 to 12.00
Asymptotic Notation- Big oh notation,
Omega notation, Theta notation and Little oh
notation
20-06-17 9.15 to 10.05
Probabilistic analysis, Amortized analysis. 21-06-17 9.15 to 10.05
Disjoint Sets 22-06-17 1.40 to 2.30disjoint set operations 23-06-17 11.10 to 12.00
connected components and biconnected
components. 27-06-17 9.15 to 10.05
Graph Algorithms with implementation issues 28-06-17 9.15 to 10.05
Depth-First Search and its applications 29-06-17 11.10 to 12.00
shortest-path and spanning tree problems 30-06-17 1.40 to 2.30
Divide and conquer: General method ,
applications-Binary search
Quick sort 12/7/2017 1.40 to 2.30Merge sort 13-07-17 1.40 to 2.30
Strassen’s matrix multiplication 14-07-17 11.10 to 12.00
Greedy method: General method,
applications-18-07-17 9.15 to 10.05
Job sequencing with dead lines 19-07-17 1.40 to 2.30
0/1 knapsack problem 25-07-17 9.15 to 10.05
D-Block / Computer Science
Engineering
union and find algorithms 24-06-17 1.40 to 2.30
11/7/2017 11.10 to 12.00
SF-21
DAA (B. Tech-I Sem)
Minimum cost spanning trees 27-07-17 11.10 to 12.00
Single source shortest path problem 28-07-17 9.15 to 10.05
Dynamic Programming: General
method, applications2/8/2017 11.10 to 12.00
Matrix chain multiplication 3/8/2017 9.15 to 10.05
Optimal binary search trees 9/8/2017 11.10 to 12.00
0/1 knapsack problem 10/8/2017 9.15 to 10.05All pairs shortest path
problem 11/8/2017 11.10 to 12.00
Travelling sales person problem 16-08-17 9.15 to 10.05
Backtracking: General method, 23-08-17 9.15 to 10.05
n-queen problem 25-08-17 9.15 to 10.05
sum of subsets problem 5/9/2017 1.40 to 2.30
graph coloring 6/9/2017 11.10 to 12.00Hamiltonian cycles 7/9/2017 1.40 to 2.30
Traveling Salesperson problem 8/9/2017 11.10 to 12.00
Applications of MANETs 07.12.2017 9.15 to 10.05
Issues of MANETs 11.12.2017 11.10 to 12.00Challenges of
MANETs 12.12.2017 10.05 to 10.55
Routing in MANETs 12.12.2017 1.40 to 2.30Classification of routing protocols 13.12.2017 9.15 to 10.05
topology based routing protocols 14.12.2017 11.10 to 12.00
position based routing protocols 18.12.2017 10.05 to 10.55
Other routing protocols 19.12.2017 1.40 to 2.30Security in MANETs 08.01.2018 9.15 to 10.05: Security in Ad Hoc Wireless Networks 09.01.2018 11.10 to 12.00
: Key management 09.01.2018 10.05 to 10.55, Secure Routing 10.01.2018 1.40 to 2.30, Cooperations in
MANETs, 11.01.2018 9.15 to 10.05
Basics of Wireless sensors and Applications
22.01.2018 10.05 to 10.55
: The Mica Mote 23.01.2018 1.40 to 2.30
Node Level Simulators. 13.02.2018 9.15 to 10.05
Security in WSNs: 14.02.2018 11.10 to 12.00Security in Wireless
Sensor Networks, 15.02.2018 10.05 to 10.55
Key Management in Wireless Sensor
Networks, 19.02.2018 1.40 to 2.30
Secure Data Aggregation in Wireless Sensor
Networks,
20.02.2018 9.15 to 10.05
Intrusion Detection System. 18.01.2018 11.10 to 12.00
Reliability design 18-08-17 11.10 to 12.00
86
MASN (B. Tech-II Sem-
B)SF-21
D-Block / Computer Science
Engineering
Dr. U D Prasan
Introduction to Vehicular Ad Hoc
Networks20.02.2018 11.10 to 12.00
Raster Scan systems Architecture 21st Nov’ 2017 14:30-15:20
Random Scan systems Architecture 23/11 /2017 13:40-15:20
Types of Display Devices 25/11 /2017 9:15-10:05
Sutherland Hodgeman Polygon Clipping
Algorithm23/01 /2018 10:05-10:55
3D Objet representation 29/01 /2018 10:05-12:00
Bezeir Curves & Splines 5/2/2018 9:15-10:55
17th, 14:30-15:2019th 12:00-12:50
Feb’2018
Visible surface detection methodsBack face method
Depth Sorting 8/3/2018 13:40-15:2013:40-14:309:15-10:55
10:05-10:55
9:15-10:05
Random Scan systems Architecture 23/11 /2017 9:15-10:05
Types of Display Devices 27/11/2017 11:10-12:00
Sutherland Hodgeman Polygon Clipping
Algorithm11/1/2018 9:15-10:05
3D Objet representation 29/01 /2018 9:15-10:05
Bezeir Curves & Splines 12/2/2018 11:10-12:00
27th, 14:30-15:2028th Feb’ 2018 9:15-10:05
Visible surface detection methodsBack face method
Depth Sorting 8/3/2018 9:15-10:55
Fundamental Steps & Application areas of
image processing17/06 /2017 9:15-10:55
Components of image processing system 19/06 /2017 9:15-10:05
Image acquisition : Sampling 20/06 /2017 13:40-15:20
Introduction to Wireless Mesh
Networks.21.02.2018 10.05 to 10.55
SF-20
Parallel & Perspective Projections
1/3/2018 12:00-12:50
Computer Animations: Morphing
15th & 16th /3/2018
Raster Scan systems Architecture
21st & 22nd Nov’ 2017
Computer Graphics ( III
CSE – II sem ‘A’ sec)
Computer Graphics ( III
CSE – II sem ‘C’ sec)
87 R.Srinivas
D BLOCK-CSE
D BLOCK-CSESF-17
Parallel & Perspective Projections
6/3/2018 9:15-10:05
Computer Animations: Morphing 16th /3/2018 14:30-15:20
Spatial and gray level resolutions 22/06 /2017 9:15-10:05
9:15-10:059:15-10:55
9:15-10:0513:40-15:20
Sharpening filter 10/8/2017 9:15-10:05Bit-plane coding: Contour Tracing 24/08 /2017 9:15-10:05
1D & 2D Run Length Coding 26/08 /2017 9:15-10:55
JPEG compression std 28/08 /2017 9:15-10:059:15-10:059:15-10:05
SkeletonsPruning
Segmentation: Thresholding- types 26/9/ 2017 13:40-15:20
Unit – I : The IT Act, 2000: A Critique 13/6/17 11.10 to 12.50
Forgetting the line between Cognizable and Non-Cognizable
Offence
20/6/17 11.10 to 12.50
“About to Commit” an offence under the IT
Act, A tribute to Darco24/6/17 10.05 to 10.55
Arrest, But No punishment 27/6/17 11.10 to 12.50
Concept of Cyber Crime and the IT Act,
2000, Hacking, Teenage Web Vandals
14/7/17 11.10 to 12.50
Cyber fraud and Cyber cheating 18/7/17 11.10 to 12.50
Virus on Internet Deformation 21/7/17 12.00 to 12.50
Harassment and E-mail Abuse 25/7/17 11.10 to 12.50
A Tug of war on the concept of permanent
establishment11/8/2017 11.10 to 12.50
Unit – IV digital Signatures, Certificate
Authorities and E - Governance
5/9/2017 11.10 to 12.50
88 Sri Y Ramesh FF-20
D-Block / Computer Science
Engineering
Crimes in this Millennium Section 80 of the IT Act. 2000 – A Weapon or a Farce?
16/6/17 11.10 to 12.50
Unit – II : Cyber Crime and Criminal Justice: Adjudication
and Appeals Under the IT Act, 2000
11/7/2017 11.10 to 12.50
Unit – III DE-Commerce Taxation – Real Problems in the
Virtual World
6/8/2017 11.10 to 12.50
Finding the PE in cross border E- 22/8/17 11.10 to 12.50
Source versus residence and
classification between business income ad
royalty
29/8/17 11.10 to 12.50
13th & 15th /07 /2017
Smoothing filter 8/8/2017
CL (IV B. Tech-I Sem)
‘D’ block-CSEImage Processing FF-20
Image negatives, log & power transformations
Basic Operations of morphology: dilation…etc
7th & 11th /09 /2017
19/09 /2017 14:30-15:20
Digital Signatures and 8/9/2017 11.10 to 12.50
Certifying Authorities and Liability in the
Event of Digital Signature compromise
12/9/2017 11.10 to 12.50
E – Governance in the India
A Warming to Bsbudom
Unit – V Protection of Cyber Consumers in
India22/9/17 11.10 to 12.50
Are Cyber Consumers Covered under the
Consumer Protection26/9/17 11.10 to 12.50
Restrictive and unfair trade practices 7/10/2017 11.10 to 12.50
Phases of Compilation 29-07-17 10.05 to 10.55
Lexical Analysis 1/7/2017 12.00 to 12.50pass and Phases of
translation 11/7/2017 10.05 to 10.55
LEX lexical analyzer generator 20-07-17 12.00 to 12.50
Predictive parsing. 5/8/2017 12.00 to 12.50Bottom up parsing 8/8/2017 10.05 to 10.55polish notation and three address codes. Attributed grammars.
26-08-17 12.00 to 12.50
Code optimization 9/9/2017 10.05 to 10.55Dataflow
analysis:Flow graph 19-09-17 12.00 to 12.50
generic code generation algorithms 25-09-17 10.05 to 10.55
HTML Introduction, Common tags. 5-Jan-18 1.40 to 2.30
Lists, Tables 7-Jan-18 2.30 to 3.20images, forms 11-Jan-18 1.40 to 2.30
Frames 12-Jan-18 1.40 to 2.30Cascading Style sheets 18-Jan-18 1.40 to 2.30Introduction to Java
Script 19-Jan-18 1.40 to 2.30
Events & Objects in Java Script 22-Jan-18 1.40 to 2.30
Dynamic HTML with Java Script 25-Jan-18 1.40 to 2.30
Introduction of XML 29-Jan-18 1.40 to 2.30Document Type
Definition 8-Feb-18 1.40 to 2.30
XML Schemas, Programs on XMl
Schema9-Feb-18 1.40 to 2.30
Document Object Model 12-Feb-18 1.40 to 2.30
Presenting XML 13-Feb-18 1.40 to 2.30
Using XML Processors 15-Feb-18 1.40 to 2.30
Document Object Model, Program on
DOM parser16-Feb-18 1.40 to 2.30
CD (B.Tech – I Sem.) SF-20
D-Block / Computer Science
Engineering
Certificates 8/9/2017 11.10 to 12.50
19/9/17 11.10 to 12.50
Goods and Services, Consumer Complaint 6/10/2017 11.10 to 12.50
Top down Parsing 22-07-17 10.05 to 10.55
Simple API for XML Parser, Program on
SAX Parser17-Feb-18 1.40 to 2.30
Installing the Java Software Development Kit, Tomcat Server &
Testing Tomcat
19-Feb-18 1.40 to 2.30
Introduction to Servlets: Lifecycle of a
Servlet22-Feb-18 1.40 to 2.30
The Servlets API, The javax.servlet Package, 23-Feb-18 1.40 to 2.30
Reading Servlets parameters 29-Feb-18 1.40 to 2.30
Reading Initialization parameters, 1-Mar-18 1.40 to 2.30
The javax.servlet.http package 3-Mar-18 1.40 to 2.30
Handling HttpRequest & Responses, Using Cookies & Session
Tracking,
8-Mar-18 1.40 to 2.30
Security Issues, The Anatomy of a JSP
Page,JSP Processing10-Mar-18 1.40 to 2.30
JSP Application Development 14-Mar-18 1.40 to 2.30
Generating Dynamic Content 15-Mar-18 1.40 to 2.30
Using Scripting Elements 17-Mar-18 1.40 to 2.30
Implicit JSP Objects 18-Mar-18 1.40 to 2.30
Conditional Processing – Displaying Values
Using an Expression to Set an Attribute
22-Mar-18 1.40 to 2.30
Declaring Variables and Methods, Error
Handling and Debugging
31-Mar-18 1.40 to 2.30
Sharing Data Between JSP pages
Action ElementsRequests, and Users Passing Control and Date between Pages
4-Apr-18 1.40 to 2.30
Database Access 11-Apr-18 1.40 to 2.30Database
Programming using JDBC
12-Apr-18 1.40 to 2.30
Studying Java.sql package, Studying Javax.sql package
16-Apr-18 1.40 to 2.30
accessing a Database from a JSP Page 18-Apr-18 1.40 to 2.30
Application Specific Database Actions 19-Apr-18 1.40 to 2.30
Program to insert data into a mysql tables. 21-Apr-18 1.40 to 2.30
Program on Prepared statement 22-Apr-18 1.40 to 2.30
ResultSet, ResultSet Meta Data 23-Apr-18 1.40 to 2.30
SF-19
D-Block / Computer Science
Engineering
1-Apr-18 1.40 to 2.30
89 Sri. M.V.B.Chandrasekhar
WT (B. Tech-II Sem)
Statement,Prepared Statement 29-Apr-18 1.40 to 2.30
Importance of modeling 16/6/17 12 to 12.50
Principles of modeling 17/6/17 9.15 to 10.5Object oriented
modeling 21-6-17 12 to 12.50
Conceptual model of UML 23/6/17 9.15 to 10.55
SDLC and Architecture 10/7/2017 10.5 to 10.55
Classes and relationships 15/7/17 11.10 to 12.00
UML diagrams 21/7/17 9.15 to 10.55Sequence and
collaboration diagrams 29/7/17 9.15 to 10.5
Sequence and collaboration diagrams 31/7/17 10.5 to 12.00
ATM application modeling 7/8/2017 11.10 to 12.00
Use case diagrams 9/8/2017 1.40 to 2.30Swim lanes and object
structures 16/8/17 2.30 to 3.20
Events and signals 18/8/17 9.15 to 11.10State machines 24/8/17 1.40 to 2.30
State chart diagrams 26/8/17 9.15 to 10.5Components and
deployments 4/9/2017 11.10 to 12.00
Component and deployment diagrams 6/9/2017 12 to 12.50
Deployment diagrams 8/9/2017 9.15 to 10.5Component diagrams 8/9/2017 10.5 to 10.55Creational patterns 15/9/17 10.5 to 10.55
Adapter and singleton pattern 21/9/17 1.40 to 2.30
Bridge and Composite pattern 23/9/17 9.15 to 10.5
Chain of responsibility 23/9/17 11.10 to 12.00Command pattern 27/9/17 11.10 to 12.50Composite pattern 4/10/2017 12 to 12.50
Levels of abstraction 4/12/2017 2.30 to 3.20
Data models,instances and schemas 5/12/2017 10.5 to 10.55
Database system structure 11/12/2017 2.30 to 3.20
Entities,attributes,ER diagrams,relationships,
entity sets12/12/2017 2.30 to 3.20
Relational schema 19/12/18 10.5 to 10.55
ER to relational schema 10/12/2017 3.20 to 4.00
ER to relational 22/12/17 1.40 to 2.30Checkpointing and
shadow paging 14/3/18 3.20 to 4.10
Hash based and tree based indexing 19/3/18 2.30 to 3.20
B+ trees and ISAM 21/3/18 3.20 to 4.10B+ tree operations 23/3/18 1.40 to 2.30
Phases of a compiler 16/06/17 1.40 to 02.30
SF-19
D-Block / Computer Science
Engineering
UMLDP (IV-I B.Tech ‘B’ SECTION)
S Vishnu Murthy
DBMS (B. Tech-II-II-A) SF-11
D-Block / Computer Science
Engineering
90
Introduction to LEX programming 11/7/2017 1.40 to 02.30
Top down parsing techniques 21/07/17 2.30 to 3.20
Bottom up parsing techniques 25/07/17 1.40 to 02.30
3-address code and attribute grammar 21/08/17 9.15 to 10.05
Code optimization 29/08/17 1.40 to 2.30DAG representation 12/9/2017 1.40 to 2.30
Flow graphs and data flow equation 15/09/17 2.30 to 3.20
Introduction to code generation 22/09/17 2.30 to 3.20
Machine dependent code optimization 25/09/17 9.15 to 10.05
DAG for register allocation 3/10/2017 1.40 to 2.30
Introduction to ER Model 4/1/2018 9.15 to 10.05
ER to relational Model 7/1/2018 12.00 to 12.50Nested queries and Correlated queries 25/01/18 9.15 to 10.05
Outer joins, triggers 10/2/2018 9.15 to 10.05Problems caused by
redundancies 16/02/18 11.05 to 12.00
Normal Forms 22/08/18 11.05 to 12.00
12
to 12.50Lock based protocols 12/3/2018 11.05 to 12.00
Recovery with concurrent transactions 16/03/18 2.30 to 3.20
Indexing 17/03/18 12.00 to 12.50B+ -Trees 22/03/18 11.05 to 12.00
Hash based Indexing 23/03/18 11.10 to 12.00
Finite Automata 30/11/17 11.05 to 12.00
NFA with epsilon to NFA without epsilon 13/12/17 12.00 to 12.50
FA with outputs 23/12/17 9.15 to 10.05Mealy and Moore
machines 2/1/2018 9.15 to 10.05
Pumping lemma 20/01/18 11.05 to 12.00Context Free Grammar 14/02/18 11.05 to 12.00
12to 12.50
Introduction to Turing machines 8/3/2018 11.05 to 12.00
LBA 19/03/18 2.30 to 3.20Universal Turing
machines 20/03/18 12.00 to 12.50
Examples of fields that use Image processing 17/06/17 11.05 to 12.00
Electromagnetic spectrum energy 19/06/17 12.00 to 12.50
Gamma ray, X-ray, UV ray images 24/06/17 2.30 to 3.20
Spatial and gray level resolution 12/7/2017 1.40 to 02.30
Color image processing 15/07/17 12.00 to 12.50
RGB, HSI, CMY color conversions 17/07/17 11.05 to 12.00
12
SF-20
D-Block / Computer Science
Engineering
SF-10
D-Block / Computer Science
EngineeringIntroduction to
transaction management
8/3/2018
SF-09
D-Block / Computer Science
EngineeringPush down automata 17/02/18
Histogram equalization 29/07/17
Compiler Design-III CSE-A
91 K.Prasada Rao
Database Management
Systems-II CSE-B
Formal Language and Automata
Theory-II CSE-C
to 12.50Smoothing and
Sharpening filters 7/8/2017 11.05 to 12.00
Redundancy coding techniques 16/08/17 2.30 to 3.20
Huffman, Arithmetic, and LZW coding 19/08/17 12.00 to 12.50
Image Compression standards 23/08/17 1.40 to 2.30
JPEG 28/08/17 11.10 to 12.00Basic morphological
operations 6/9/2017 1.40 to 02.30
Boundary extraction and Convex hull 14/09/17 2.30 to 3.20
Graph theoretic techniques 4/10/2017 1.40 to 2.30
Region based segmentation 5/10/2017 11.10 to 12.00
Rmdir, du,df,mount 6/12/2017 12 to 12.50Ulimit,ps,who,grep,trig
ger 8/12/2017 2.30 to 3.20
Control structures 11/1/2018 10.05 to 10.55Shell script examples 12/1/2018 2.30 to 3.20
Unix file structures,dir 13-1-18 9.15 to 10.05Status,fstat,umask,dup1
,dup2
Standrand input 20-1-18 9.15 to 10.05Process identifier 17-02-18 9.15 to 10.05Fork,vfork,exit 21-02-18 12.to 12.55Exec,sigfun() 22-02-18 10.05 to 10.55
Application of ipc 15-3-18 10.05 to 10.55
Object oriented modeling trends 17-06-17 10 to 10.55
Architecture of uml 27-06-17 9.15 to 10.05.User view,structure view,implementation
view28-06-2017 2.30 to 3.20
Software development life cycle 30-06-2017 9.15 to 10.05
Inception .review ,walkthrough 1/7/2017 10 to 10.55
Basic structural modeling classes 10/7/2017 2.30 to 3.20
Realationships 11/7/2017 9.15 to 10.05Comman mechanisms
and diagrams 12/7/2017 2.30 to 3.20
Intarction diagram 25-07-2017 10 to 10.55usecase 28-07-2017 9.15 to 10.05
Acitivity diagram 29-07-2017 2.30 to 3.20Introduction to
advanced behavioural modeling
2/8/2017 2.30 to 3.20
Time and space 19-08-2017 10 to 10.55Term and concept of state chart diagram 21-08-17 2.30 to 3.20
Design patterns 4/9/2017 9.15 to 10.05Small talk mvc 5/9/2017 10 to 10.55
model 6/9/2017 2.30 to 3.20View 6/9/2017 3.20to 4.10
control 8/9/2017 2.30 to 3.20Describe the design
pattern 9/9/2017 9.15 to 10.05
Intent,motivatuion 9/9/2017 10.05 to 10.55Single tone 23-09-17 9.15 to 10.05
Structural pattern 25-09-17 2.30 to 3.20
FF-20
D-Block / Computer Science
Engineering
Unix programming
(IIIB. Tech CSE-B-II Sem)
UML&DP ( IV B. Tech CSE -C-I
Sem)
FF-17
D-Block / Computer Science
Engineering
Histogram equalization 29/07/17
SF-18
D-Block / Computer Science
Engineering19-1-18 2.30 to 3.20
Image Processing-IV CSE-C
adapter 29-09-17 9.15 to 10.05Examples of command 10/10/2017 9.15 to 10.05
Difference b/w composite and
command11/10/2017 2.30 to 3.20
Model for testing 11/12/2017 9.15 to 10.05Bug,program
environment model 12/12/2017 2.30 to 3.20
9.15 to 10.05
&10.05 to 10.55Path expression 6/2/2018 2.30 to 3.20Floe anonomyes
deleation 13-02-18 11.10 to 12.00
Kv chart specification 21-2-18 12.00 to 12.50State,state graph 23-2-18 1.40 to 2.30
Transitation testing 26-2-18 1.40 to 2.30Good are bad state
graph 28-02-2018 2.30 to 4.10
Performance testing 2/4/2018 11.10 to 12.00
pipes,input,output
redirectionhere document 13-11-17 11.10 TO 12.00
Shell as programming language 15-11-17 11.10 TO 12.00
Process structures 20-11-17 11.10 TO 12.00Waiting a process 22-11-17 11.10 TO 12.00System functions 1/12/2017 11.10 TO 12.00
Contiginous memory location 11/12/2017 10.05 to 10.55
Allocation of frames,thrashing. 18-12-2017 12.00 to 12.50
Signal function 19-12-17 1.40 to 2.30Interprocess
communication 19-01-18 1.40 to 2.30
Named pipes 24-01-18 1.40 to 2.30Fifo ,semaphore, 25-1-18 1.40 to 2.30Message queue 27-1-18 1.40 to 2.30
vi editor 20/11/17 10.05 to 11.00
Architecture of UNIX OS 21/11/17 2.30 to 3.20
How to login UNIX system 23/11/17 1.40 to 2.30
file handling utilities ps, who, w 25/11/17 11.10 to 12.00
file handling utilities cp, mv, ln, rm, unlink,
mkdir, rmdir27/11/17 10.05 to 11.00
securityand file permissions
chmod,chown,chgrp , octal approach
process utilities ps, ps -l, ps -AL, 30/11/17 1.40 to 2.30
Backup utilities tar zip gzip cpio 1/12/2017 11.10 to 12.00
disk utilities du, df, mount, umount, find,
unmask, ulimit4/12/2017 10.05 to 11.00
Stm(iv .B.tech CSE-B II sem) FF-18
D-Block / Computer Science
Engineering
Path instrumanation,applicat
ion ,path4/1/2018
Testability tips 6/3/2018 9.15 to 10.05
OPERATING SYSTEM -
I.M.TECH –I SEM
10/11/2017 1.40 to 2.30
SF-12
D-Block / Computer Science
Engineering
28/11/17 2.30 to 3.20
networking commands inger, arp, ftp, telnet,
rlogin,5/12/2017 2.30 to 3.20
Unix Utilities cat, tail, head, sort, nl, uniq,
grep, egrep, fgrep, cut, paste, join, tee, pg,
comm, cmp, diff, tr, awk, tar, cpio.
7/12/2017 1.40 to 2.30
Tutorial 11/12/2017 11.10 to 12.00About Shell,
Working with the Bourne shell, C Shell,
Bash, Bsh , Kshwhat is a shell, shell
responsibilities, 14/12/17 2.30 to 3.20
Pipes ( | ) and input Redirection, output
redirection> , < ,>> , <<
here documents, the shell as a programming
language16/12/17 11.10 to 12.00
shell meta characters, shell variables 18/12/17 10.05 to 11.00
shell commands, 19/12/17 2.30 to 3.20control structures
if ... else loop ,if else if loop
if elif ...else loopexamples
control structurescase structure
examplescontrol structures
while loop examplesFor loop examples 3/1/2017 2.30 to 3.20
Until loop structure and examples 4/1/2017 1.40 to 2.30
Sample shell scripts 5/1/2017 11.10 to 12.00Sample shell scripts 6/1/2017 10.05 to 11.00Sample shell scripts 9/1/2017 10.05 to 11.00
Tutorial 11/1/2017 2.30 to 3.20Unix file structure, tree
structure , root directory
17/02/17 1.40 to 2.30
Directory structure 18/01/17 11.10 to 12.00files and devices 19/01/17 10.05 to 11.00
System calls vs libraryfunctions
System calls ..open, creat, read,
write, close, lseek, stat, fstat, octl, umask, dup,
dup2System calls ..
stat, fstat, octl, umask, dup, dup2
The standard I/Ofopen, fclose, fflush,
fseek, fgetc, getc, getchar
The standard I/Ofputc, putc,
putchar,fgets, gets
File related system calls
2/1/2018 10.05 to 11.00
22/01/17 2.30 to 3.20
23/01/17 1.40 to 2.30
25/02/17 11.10 to 12.00
27/01/17 10.05 to 11.00
29/01/17 2.30 to 3.20
1/2/2017 1.40 to 2.30
Sri T.CHALAPATHI RAO92
UNIX PROGRAMMING
-CSE-CSF-17
D-Block / Computer Science
Engineering
12/12/2017 10.05 to 11.00
15/12/17 1.40 to 2.30
20/12/17 1.40 to 2.30
24/01/17 11.10 to 12.00
chmod, chown, unlink, link, symlink
File related system calls
mkdir, rmdir, chdir, getcwd
Directory handling system calls (opendir,
readdir, closedir,rewinddir,
seekdir, telldir)
6/2/2017 10.05 to 11.00
Streams and file descriptors 7/2/2017 2.30 to 3.20
What is process, process structure
process commandsps, ps -al, ps -l, process
identifiers,starting new process,waiting for a process,
init processzombie process, process control, 10/2/2017 10.05 to 11.00
System callsfork, vfork, exit, wait, waitpid, exec, system.
Signals 17/02/17 1.40 to 2.30Signal functions,
Reliable and unreliable signals
19/02/17 11.10 to 12.00
interrupted system calls, kill and raise
functions20/02/17 10.05 to 11.00
alarm, pause functions, abort, sleep functions 22/02/17 10.05 to 11.00
interprocess Communication 24/02/17 2.30 to 3.20
Introduction to IPC-IPC between processes 26/02/17 1.40 to 2.30
IPC on single computer systems ,PC on multiple computer
systems
1/3/2017 11.10 to 12.00
Pipes, PIPE system calls full duplex , half
duplex12/3/2017 10.05 to 11.00
FIFOs , named fifo, unnamed fifo 13/03/17 10.05 to 11.00
Semaphores- 14/03/17 2.30 to 3.20Unix system-V
semaphoressemaphore programs
unix kernel support for semaphoresprograms
Message queus and related system calls 17/03/17 10.05 to 11.00
Shared memory and related system calls 19/03/17 2.30 to 3.20
Structure of 9:15
C Programming 10:05Break, Continue 1:40
And goto statements 2:309:15
10:05
9/2/2017 11.10 to 12.00
15/03/17 2.30 to 3.20
15/03/17 1.40 to 2.30
16/03/17 11.10 to 12.00
5/10/2017
11/10/2017
Recursion 7/11/2017
1/2/2017 1.40 to 2.30
5/2/2017 11.10 to 12.00
8/2/2017 1.40 to 2.30
D Block/
1:402:309:15
10:0512:501:40
12:501:401:402:30
10:0510:5510:0510:55
Stack Operations 12:50Implementation 1:40
Queue Operations 12:50Implementation 1:40
Circular Linked List 12:50Operations, Applications 1:40
Representation of 12:50Binary Tree 1:40
11:1012:009:15
10:05
10:05
10:5511:1012:009.15
10:5511:1012:0011:1012:0011:1012:009.15
10:559.15
10:55
Color Image processing 11/7/2017 9.15-10.05
Color Model :RGB 11/7/2017 10.05-10.55Color Model :CMYK 12/7/2017 11.10-12.00
Color Model :HIS 13-7-17 1.40 to 2.30
Error free Compression 16-8-17 11.10-12.00
Variable length coding 16-8-17 11.10-12.00LZW coding 17-8-17 1.40 -2.30
Bit plane coding 22-8-17 9.15-10.05Image compression
Standards 23-8-17 11.10-12.00
JPEG 24-8-17 1.40 -2.30Erosion and dilation 5/9/2017 10.05-10.55Opening and closing 6/9/2017 11.10-12.00Hit or miss transform 7/9/2017 2.30 -3:20Boundary extraction 8/9/2017 1.40 -2.30
Region filling, Extras of commented
component11/9/2017 9.15-10.05
Convex hull, Skelton 12/9/2017 9.15-10.05Thinning, Thickening 13-9-17 11.10-12.00
Pruning 14-9-17 2.30-3.20
94 G Stalin Babu
IP (IVB. Tech-I Sem)
Icons 12/3/2018
Color –What is it? 15-3-18
Color -Uses 16-3-18
FF-19
D-Block / Computer Science
Engineering
D Block/ Computer
Science And Engineering
93 B.Ramesh
Computer Programming FF-10
Unions 17/11/17
File I/O Functions 28/11/17
Random Access Functions 30/11/17
Programming on Random Functions 30/11/17
Programming on files 1/12/2017
Linear Search 27-01-18
D Block/ Computer
Science And Engineering
Computer Programming
D Block/ Computer
Science And Engineering
HCI (IV B.TECH-II SEM)
FF-10
Binary Search 5/2/2018
17-02-18
12/3/2018
22-03-18
3/4/2018
Graph Traversal - BFS 20-04-18
Graph Traversal - DFS 21-04-18
Web user interface popularity 14-12-17
FF-19
Human interaction with speeds 3/1/2018
Navigation menus 1/2/2018
Kinds of menus 2/2/2018
Types of windows 16-2-18
Region based segmentation: Region
going4/10/2017 11.10-12.00
Region Splitting 5/10/2017 2.30-3.20Merge 6/10/2017 1.40-2.30
Mobile computing Architecture 22-6-17 11.10-12.00
GSM System architecture 13-7-17 11.10-12.00
Motivation for a specialized MAC 28-7-17 10.05-10.55
Hidden and exposed terminals 28-7-17 10.05-10.55
Near and far terminals 29-7-17 12.00-12.50IP packet delivery 18-8-17 10.05-10.55
agent advertisement and discovery 19-8-17 12.00-12.50
Registration 23-8-17 9.15-10.05Tunneling and encapsulation 24-8-17 10.05-10.55
optimizations 6/9/2017 9.15-10.05Dynamic Host
Configuration Protocol (DHCP)
7/9/2017 10.05-10.55
Routing and various routing algorithms 23-9-17 12.00-12.50
GSM Services & System Architecture 11.07.17 11.10 to 12.00
Radio interface 13.07.17 11.10 to 12.00Motivation for
specialized MAC 21.07.17 1.40 to 2.30
Hidden and Exposed Terminals 24.07.17 10.05 to 10.55
Near and Far Terminals 26.07.17 9.15 to 10.05
Goals and assumptions mobile IP 21.08.17 2.30 to 3.20
Entities and Terminology mobile IP 21.08.17 2.30 to 3.20
Registration mobile IP 29.08.17 10.05 to 10.55Introduction to mobile
transport layer 08.09.17 1.40 to 2.30
Traditional TCP 12.09.17 1.40 to 2.30Security in MANET 26.09.17 10.05 to 10.55MANET Routing
algorithms 27.09.17 9.15 to 10.05
Architecture of GSM 01.03.18 1.40 to 2.30
Mobile service & systems architecture 05.03.18 11.10 to 12.00
Indirect TCP 13.04.18 11.10 to 12.00Snooping TCP,Mobile
TCP 16.04.18 11.10 to 12.00
Fast retransmit /fast recovery 16.04.18 12.00 to 12.50
Transmission /timeout freezing 16.04.18 12.00 to 12.50
Selective retransmission 17.04.18 9.15 to 10.05
Transaction oriented tcp 20.04.18 11.10 to 12.00
Context aware computing 30.04.18 11.10 to 12.00
Transactional models 30.04.18 12.00 to 12.50Query
processing,recovery 01.05.18 9.15 to 10.05
MC (IVB. Tech-I Sem) FF-20
D-Block / Computer Science
Engineering
FF-17
D-Block / Computer Science
Engineering
SF-12
D-Block / Computer Science
Engineering
MC (IV –I B.Tech SEC-C)
MC (M.Tech sem-II)
Pull based mechanism 11.06.18 11.10 to 12.00Hybrid mechanism 12.06.18 9.15 to 10.05Selective tuning
techniques 15.06.18 11.10 to 12.00
Wireless application protocol 29.06.18 11.10 to 12.00
Protocol architecture 29.06.18 12.00 to 12.50Networksecurity 09.07.18 11.10 to 12.00
Link management 09.07.18 12.00 to 12.50Network algorithms 16.07.18 11.10 to 12.00
Cascading Styles sheets 01.12.17 9.15 to 10.05
Cascading Styles sheets examples 01.12.17 1.40 to 2.30
Document type definition 15.12.17 9.15 to 10.05
XML schema 16.12.17 11.10 to 12.00Programs on XML
Schema 16.12.17 12.00 to 12.50
Document Object Model 22.12.17 9.15 to 10.05
Presenting XML using XML processor 02.01.18 11.10 to 12.00
Program on DOM parser 05.01.18 9.15 to 10.05
Installing the java software Development
Kit25.01.18 11.10 to 12.00
Tomacat Server and Testing Tomcat 25.01.18 12.00 to 12.50
Cookies examples 30.01.18 11.10 to 12.00Session Tracking in
servlets 02.02.18 9.15 to 10.05
JSP Application Development 15.02.18 11.10 to 12.00
Database programming using JDBC 09.01.18 11.10 to 12.00
Java.sql.package 20.01.18 11.10 to 12.00Javax.sql.package 22.01.18 10.05 to 10.55
Accessing database from JSP page 12.03.18 10.05 to 10.55
Application specific database actions 12.03.18 11.10 to 12.00
11:10-12:00
&12:00-12:5011:10-12:00
&12:00-12:5011:10-12:00
&12:00-12:50
11:10-12:00&
12:00-12:50Abstract Classes 1/9/2017 11.10-12.00
Virtual functions 6/9/2017 12:00-12:50Pointers to derived
class 14/09/2017 11.00-12.00
95
96 Smt.N.Preeti
Comparison b/w procedural
programming paradigm and OOP
28/06/2017
SF-10
Control Structures 19/07/2017
Classes and objects 2/8/2017
Inheritances 11/8/2017 11.10-12.00
Types of Inheritances 30/08/2017
Pointers 6/9/2017 11:10-12:00
SF-17
D-Block / Computer Science
Engineering
WT (III–II B.Tech SEC-C)
OOPS (II B. Tech-I Sem)
D-Block / Computer Science
Engineering
L.V.Satyanarayana
Templates 20/9/2017 12.00-12.5011:10-12:00
&12:00-12:50
I/O Operations 6/10/2017 11.10-12.00
Introduction to UML 13/06/17 9:15 to 10:05
Interaction Diagrams 1/8/2017 10:05 to 10:55Swimlanes, Object
flow 17/08/17 10:05 to 10:55
11:10 to 12:00 &1:40 to 2:30
Creational Patterns,Abstract Factory,
11:10 to 12:00 &
1:40 to 2:30
Introduction to CG 20/11/17 1:40 to 2:30
2:30 to3:20
2:30 to3:20
Visible surface detection methods,
Back-Face Detection12/3/2018 1:40 to 2:30
Depth buffer method, Scanline method 15/03/18 9:15 to 10:05
Computer animation, sequences,Raster
animation16/03/18 11:10 to 12:00
UNIT-1 : Conventional software
management 20-11-17 1.40 to 2.30
The waterfall model 22-11-17 2.30 to 3.20conventional software
management performance
23-11-17 10.05 to 10.55
Evolution of software economics 24-11-17 2.30 to 3.20
Software economics 27-11-17 1.40 to 2.30pragmatic software
cost estimation 29-11-17 2.30 to 3.20
UNIT-2 : Improving software economics 30-11-17 10.05 to 10.55
Reducing software product size 1/12/2017 2.30 to 3.20
Improving software processes 4/12/2017 1.40 to 2.30
Improving team effectiveness 6/12/2017 2.30 to 3.20
Improving automation 7/12/2017 10.05 to 10.55Achieving required
quality 8/12/2017 2.30 to 3.20
The old and the new 11/12/2017 1.40 to 2.30The principles of
conventional software engineering
13-12-17 2.30 to 3.20
Principles of modern software management 14-12-17 10.05 to 10.55
Transitioning to an iterative process 15-12-17 2.30 to 3.20
Transitioning to an iterative process 18-12-17 1.40 to 2.30
FF-20
D-Block / Computer Science
Engineering
Introduction to Design Patterns 14/09/17
19/09/17 9:15 to 10:05
Behavioral pattern,Chain of resposnibilities
5/10/2017
SF-19
D-Block / Computer Science
Engineering
Application of CG 21/11/17
Projections 27/02/18
Exception Handling 4/10/2017
V.A.G.Raju97
UML&DP-IV B.Tech-I SEM-
CSE-A
CG-III B.Tech-II SEM-CSE-B
Transitioning to an iterative process 20-12-17 2.30 to 3.20
Life cycle phases 1/1/2018 10.05 to 10.55Engineering stages 3/1/2018 2.30 to 3.20
Inception phase 4/1/2018 1.40 to 2.30Elaboration phase 5/1/2018 2.30 to 3.20Production stages 8/1/2018 10.05 to 10.55
Construction phase 10/1/2018 2.30 to 3.20Transition phase 11/1/2018 1.40 to 2.30
UNIT-3: Introduction 12/1/2018 2.30 to 3.20Artifacts of the process 15-01-18 10.05 to 10.55
The artifact sets 17-01-18 2.30 to 3.20Model based software
architectures 18-01-19 1.40 to 2.30
A management perspective 19-01-18 2.30 to 3.20
Technical perspective 22-01-18 10.05 to 10.55Work flows of the
process 24-01-18 2.30 to 3.20
software process workflows 25-01-18 1.40 to 2.30
Iteration workflows 26-01-18 2.30 to 3.20Checkpoints of the
process 29-01-18 10.05 to 10.55
Major milestones 31-01-18 2.30 to 3.20Minor milestones 1/2/2018 1.40 to 2.30Periodic status
assessments 2/2/2018 2.30 to 3.20
Periodic status assessments 5/2/2018 10.05 to 10.55
UNIT-4: Iterative process planning 12/2/2018 2.30 to 3.20
Work breakdown structure 14-02-18 1.40 to 2.30
Planning guidelines 15-02-18 2.30 to 3.20Cost and schedule
estimating 16-02-18 10.05 to 10.55
Project organizations and responsibilities 19-02-18 2.30 to 3.20
Line of business organizations 21-02-18 1.40 to 2.30
Project organizations 22-02-18 2.30 to 3.20Evolution of organizations 23-02-18 10.05 to 10.55
Process automation :The project environment
26-02-18 2.30 to 3.20
UNIT-5: Project control and process
instrumentation28-02-18 2.30 to 3.20
The seven core metrics 1/3/2018 10.05 to 10.55Management indicators 2/3/2018 2.30 to 3.20
Quality Indicators 5/3/2018 1.40 to 2.30Pragmatic software
metrics 7/3/2018 2.30 to 3.20
Metrics automation 8/3/2018 10.05 to 10.55Tailoring the process 9/3/2018 2.30 to 3.20Process discriminates 12/3/2018 1.40 to 2.30
Case study 14-03-18 2.30 to 3.20The command center
processing 15-03-18 10.05 to 10.55
Display system replacement 16-03-18 2.30 to 3.20
CCPDS-R 19-03-18 1.40 to 2.30UNIT-1 :
Conventional software management
20-11-17 1.40 to 2.30
SPM(III B.Tech C-Section) SF-17
D-Block / Computer Science
Engineering
98 N S R PHANINDRA KUMAR
The waterfall model 22-11-17 2.30 to 3.20conventional software
management performance
23-11-17 10.05 to 10.55
Evolution of software economics 24-11-17 2.30 to 3.20
Software economics 27-11-17 1.40 to 2.30pragmatic software
cost estimation 29-11-17 2.30 to 3.20
UNIT-2 : Improving software economics 30-11-17 10.05 to 10.55
Reducing software product size 1/12/2017 2.30 to 3.20
Improving software processes 4/12/2017 1.40 to 2.30
Improving team effectiveness 6/12/2017 2.30 to 3.20
Improving automation 7/12/2017 10.05 to 10.55Achieving required
quality 8/12/2017 2.30 to 3.20
The old and the new 11/12/2017 1.40 to 2.30The principles of
conventional software engineering
13-12-17 2.30 to 3.20
Principles of modern software management 14-12-17 10.05 to 10.55
Transitioning to an iterative process 15-12-17 2.30 to 3.20
Transitioning to an iterative process 18-12-17 1.40 to 2.30
Transitioning to an iterative process 20-12-17 2.30 to 3.20
Life cycle phases 1/1/2018 10.05 to 10.55Engineering stages 3/1/2018 2.30 to 3.20
Inception phase 4/1/2018 1.40 to 2.30Elaboration phase 5/1/2018 2.30 to 3.20Production stages 8/1/2018 10.05 to 10.55
Construction phase 10/1/2018 2.30 to 3.20Transition phase 11/1/2018 1.40 to 2.30
UNIT-3: Introduction 12/1/2018 2.30 to 3.20Artifacts of the process 15-01-18 10.05 to 10.55
The artifact sets 17-01-18 2.30 to 3.20Model based software
architectures 18-01-19 1.40 to 2.30
A management perspective 19-01-18 2.30 to 3.20
Technical perspective 22-01-18 10.05 to 10.55Work flows of the
process 24-01-18 2.30 to 3.20
software process workflows 25-01-18 1.40 to 2.30
Iteration workflows 26-01-18 2.30 to 3.20Checkpoints of the
process 29-01-18 10.05 to 10.55
Major milestones 31-01-18 2.30 to 3.20Minor milestones 1/2/2018 1.40 to 2.30Periodic status
assessments 2/2/2018 2.30 to 3.20
Periodic status assessments 5/2/2018 10.05 to 10.55
UNIT-4: Iterative process planning 12/2/2018 2.30 to 3.20
Work breakdown structure 14-02-18 1.40 to 2.30
Planning guidelines 15-02-18 2.30 to 3.20Cost and schedule
estimating 16-02-18 10.05 to 10.55
SPM(III B.Tech C-Section) SF-17
D-Block / Computer Science
Engineering
Project organizations and responsibilities 19-02-18 2.30 to 3.20
Line of business organizations 21-02-18 1.40 to 2.30
Project organizations 22-02-18 2.30 to 3.20Evolution of organizations 23-02-18 10.05 to 10.55
Process automation :The project environment
26-02-18 2.30 to 3.20
UNIT-5: Project control and process
instrumentation28-02-18 2.30 to 3.20
The seven core metrics 1/3/2018 10.05 to 10.55Management indicators 2/3/2018 2.30 to 3.20
Quality Indicators 5/3/2018 1.40 to 2.30Pragmatic software
metrics 7/3/2018 2.30 to 3.20
Metrics automation 8/3/2018 10.05 to 10.55Tailoring the process 9/3/2018 2.30 to 3.20Process discriminates 12/3/2018 1.40 to 2.30
Case study 14-03-18 2.30 to 3.20The command center
processing 15-03-18 10.05 to 10.55
Display system replacement 16-03-18 2.30 to 3.20
CCPDS-R 19-03-18 1.40 to 2.30Regular Expression &
CFG, Derivation of Parse Trees
13-12-17 12.00 to 12.50
Heap and Scope Rules 20-12-17 12.00 to 12.50Binding Referencing
Environment 7/1/2018 9.15 to 10.55
Expression Evaluation 8/1/2018 10.05 to 10.55Attribute Grammar 24-01-18 12.00 to 12.50
EvaluatingAttributesRecords 16-02-18 1.40 to 3.20
Pointers and Recursive Types 21-02-18 10.05 to 10.55
Stack Layout, Calling Sequence 3/3/2018 11.10 to 12.50
Dynamic binding 16-03-18 9.15 to 10.55V-Tables and
Polymorphysim 15-03-18 1.40 to 2.30
Regular Expression & CFG, Derivation of
Parse Trees15-12-17 02.30 to 03.20
Heap and Scope Rules 6/1/2018 9.15 to 10.55Binding Referencing
Environment 9/1/2018 10.05 to 10.55
Expression Evaluation 8/1/2018 12.00 to 12.50Attribute Grammar 24-01-18 10.05 to 10.55
EvaluatingAttributesRecords 19-02-18 1.40 to 2.30
Pointers and Recursive Types 26-02-18 1.40 to 3.20
Stack Layout, Calling Sequence 27-02-18 12.00 to 12.50
Dynamic binding 19-03-18 1.40 to 2.30V-Tables and
Polymorphysim 20-03-18 12.00 to 12.50
Predicate Calculus 31-07-17 11.10 to 12.50
Mathematical Induction 3/8/2017 2.30 to 4.10
SF-09
D-Block / Computer Science
Engineering
25-01-18 9.15 to 10.55
SF-11
D-Block / Computer Science
Engineering
29-01-18 1.40 to 2.3099 Mr.G.S.P.KUMAR
PPL (B. Tech-II Sem) CSE-C
PPL (B. Tech-II Sem)-CSE-A
MFCS (B. Tech-I SF-11
D-Block / Computer
BFS and DFS 21-08-17 11.10-12.50Lattices properties 22-09-17 2.30 to 4.10
Second Order Recurrence Relations 7/10/2017 1.40 to 3.20
Predicate Calculus 29-07-17 9.15 to 10.10
Predicate Calculus 31-07-17 9.15 to 10.10
Mathematical Induction 2/8/2017 2.30 to 4.10BFS and DFS 26-08-17 9.15 to 10.10
10.05 to 10.55 &11.10 to 12.00 &
1.40 to 2.30Second Order
Recurrence Relations 10/10/2017 10.05 to 11.00 & 3.20 to 4.20
Improving software economics 2/12/2017 10.05-10.50
Reducing software product size
,Improving software process,Improving Team effectiveness
11/12/2017 10.05-10.50
Improving Automation ,Quality in software 12/12/2017 10.05-10.50
The old and new principles of
conventional s/w engineering
13/12/2017 11.10-12.00
Software management 13/12/2017 11.10-12.00Life cycle phases 18/12/2017 10.05-10.50
Inception and elaboration stages 20/12/2017 2.30-3.20
Artifacts of the process 20/12/2017 10.05-10.50Mangement set and
engineering set 9/1/2018 11.10-12.00
Workflows of the process 20/1/2018 12.00-12.50
Checkpoint s of the process 23/1/2018 12.00-12.50
Major milestones and minor milestones 24/1/2018 11.10-12.00
Periodic status assessments 30/1/2018 2.30-3.20
Necessary steps for assessment 31/1/2018 12.00-12.50
Iterative process planning 17/02/2018 2.30-3.20
Work break down structures 19/02/2018 12.00-12.50
Planning guidelines 20/02/2018 11.10-12.00Cost and scheduling estimating process 26/02/2018 12.00-12.50
Project organization and responsibility 27/02/2018 11.10-12.00
Line of business organization 28/2/018 12.00-12.50
Project organization 3/3/2018 2.30-3.20Evolution of organization 5/3/2018 12.00-12.50
Team emphasis 6/3/2018 11.10-12.00Process automation 7/3/2018 12.00-12.50Project environment 7/3/2018 12.00-12.50Project control and process inspection, Seven core metrics
12/3/2018 11.10-12.00
Sem)-CSE-A SF-11 Science Engineering
MFCS (B. Tech-I Sem)-CSE-C SF-09
D-Block / Computer Science
EngineeringLattices properties 21-09-17
100 K.B.Anusha SF-22
D-Block / Computer Science
Engineering
SPM (B. Tech-II Sem)
Management indicators, quality
indicators13/03/2018 12.00-12.50
Process Discriminates 14/03/2018 11.10-12.00Case study CCPDC-R 17/03/2018 2.30-3.20Business definition requirement analysis 01.01.18 9.15 to 10.05
Develop system menu navigation 05.01.18 10.05 to 10.55
Write clear text and messages 29.01.18 11.10 to 12.00
Select the proper kinds of windows 30.01.18 9.15 to 10.05
Window characteristics 2.2.18 11.10 to 12.00Components of
windows 05.02.18 9.15 to 10.05
Color uses 09.03.18 11.10 to 12.00Possible problems with
colors 12.03.18 10.05 to 10.55
Choosing colors for textual and graphic
screens16.03.18 11.10 to 12.00
Statistical graphic screens 19.03.18 10.05 to 10.55
Python operators, identifiers 12/7/2017 9.15 to 10.05
Variables, conditional statements 17-07-17 11.10 to 12.00
Control structures 18-07-17 9.15 to 10.05PERL packages 11/9/2017 11.10 to 12.00PERL modules 12/9/2017 9.15 to 10.05
Working with files 13-09-17 2.30 to 3.20
Perl regular expressions 4/10/2017 11.10 to 12.00
Perl text processing 5/10/2017 2.30 to 3.20Record selection
technology in MySql 29-06-17 10.05 to 10.55
Working with strings 30-06-17 10.05 to 10.55Working with Date
and time 1/7/2017 9.15 to 10.05
Sorting Query results 10/7/2017 9.15 to 10.05Working with meta
data 13-07-17 10.05 to 10.55
Using sequences Mysql and web 14-07-17 10.05 to 10.55
Regular Expressions in PHP 29-07-17 9.15 to 10.05
PHP and MySql 3/8/2017 9.15 to 10.05Sending and receiving
E-mails 5/8/2017 9.15 to 10.05
Templates in PHP 10/8/2017 2.30 to 3.20Security 11/8/2017 10.05 to 10.55
PHP web applications 14-08-17 2.30 to 3.20Python Numbers 21-08-17 2.30 to 3.20Python sequences 24-08-17 2.30 to 3.20
Files and I/O 9/9/2017 10.05 to 10.55Functions in python 11/9/2017 9.15 to 10.05
Kerbos V4 5/2/2018 9.15 to 10.05
V4 vs V5 6/2/2018 9.15 to 10.05S/MIME 6/2/2018 9.15 to 10.05
X.509 Directory Authentication 12/2/2018 9.15 to 10.05
Certificate Revocation 14-2-18 9.15 to 10.05S/MIME functionality 16-2-18 9.15 to 10.05
101 D.Sreenubabu
HCI (B. Tech-II Sem)SEC-C
FOSS (B. Tech-I Sem)-SEC-A
OSS (B. Tech-I Sem)-SEC-C FF-18
D-Block / Computer Science
Engineering
FF-18
D-Block / Computer Science
Engineering
SF-11
D-Block / Computer Science
Engineering
PGP 19-2-18 9.15 to 10.05IPSec introduction 21-2-18 9.15 to 10.05
Architecture 21-2-18 9.15 to 10.05AH & ESP protocol 26-2-18 9.15 to 10.05
Oakley 26-2-18 9.15 to 10.05ISAKMP protocol 27-2-18 3.20 to 4.10SSL architecture 28-2-18 9.15 to 10.05
Web security consideration 28-2-18 10.05 to 10.55
TLS 5/3/2018 9.15 to 10.05SET 6/3/2018 3.20 to 4.10
Intruders 8/3/2018 2.30 to 3.20Intrusion technique 8/3/2018 2.30 to 3.20
Password management 9/3/2018 9.15 to 10.05Firewall 12/3/2018 9.20 to 10.10
Characteristics 12/3/2018 9.15 to 10.05Firewall types 13-3-18 3.20 to 4.10Trusted system 13-3-18 3.20 to 4.10
Malicious program 14-3-18 9.15 to 10.05types 14-3-18 9.15 to 10.05Virus 15-3-18 2.30 to 3.20
Virus types 15-3-18 2.30 to 3.20
Introduction to Foss 27-06-17 01:40 to 02:30
Introduction & running python 28-06-17 03.20 to 04.10
Introduction to python-History 4/7/2017 01.40 to 02:30
Features of python 17-07-17 01:40 to 02:30
comments 12/7/2017 03.20 to 04:10Variables 12/7/2017 03.20 to 04:10operators 14-07-17 09:15 to 10:05Identifiers 19-07-17 03.20 to 04.10
Conditional Statements 25-07-17 01:40 to 02:30Loops 28-07-17 09.15 to 10.05Loops 29-07-17 02.30 to 03.20
Statements/syntax 1/8/2017 01.40 to 02:30 Numbers 2/8/2017 03.20 to 04.10
Strings-Introduction 16-08-17 01:40 to 02:30Strings-Operators 16-08-17 01:40 to 02:30
Functions With String module 17-08-17 03.20 to 04:10
Lists-operators 18-08-17 11:10 to 12:00Processing Lists 23-08-17 03.20 to 04:20
Tuples 26-08-17 01:40 to 02:30
Dictionaries 30-08-17 03.20 to 04:10Files Introduction 5/9/2017 01.40 to 02:30
File Reading 6/9/2017 03.20 to 04:10
File Writing8/9/2017 09:15to 10.05
Perl Overview 15-09-17 03:20to 04:10Parsing rules 26-09-17 01:40 to 02:30
Variables & Data 27-09-17 3.20 to 4.10Statements 3/10/2017 01:40 to 02:30
Conditional Statements 3/10/2017 01:40 to 02:30Loop Statements 4/10/2017 02.30 to 03.20Loop Statements 4/10/2017 03.20 to 04.10
Subroutines 6/10/2017 01:40 to 02:30Packages& modules 13-10-17 9.15 to 10.05Working with files 17-10-17 01:40 to 02:30
Introduction 12/6/2017 2.30 to 3.20Need of OSS 14-6-17 11.10 to 12.00
SF-10
D-Block / Computer Science
Engineering
Dictionaries 29-08-17 01.40 to 02.30
NSC(III CSE-IIsem) SF-13
D-Block / Computer Science
Engineering
FOSS (IIB.Tech-ISem)
Advantages &Disadvantages of
OSS15-6-17 11.10 to 12.00
Applications of OSS 17-6-17 11.10 to 12.00Linux introduction 19-6-17 2.30 to 3.20
kernel and user mode 19-6-17 2.30 to 3.20Process advanced
concepts 20-6-17 09.15 to 10.15
Scheduling 21-6-17 11.10 to 12.00Personalities 21-6-17 11.10 to 12.00
Cloning 24-6-17 11.10 to 12.00Signals 27-6-17 09.15 to 10.15
Development tools 28-6-17 11.10 to 12.00Development tools 10/7/2017 2.30 to 3.20
MySQL introduction 11/7/2017 09.15 to 10.15Setting Account 11/7/2017 09.15 to 10.15Login & logout 12/7/2017 10.05 to 10.55
Record Selection Technology 17-7-17 2.30 to 3.20
Date functions 18-7-17 09.15 to 10.15Time handling
Functions 18-7-17 09.15 to 10.15
Strings 19-7-17 11.10 to 12.00Pattern matching 20-7-17 2.30 to 3.20
Php database connection 24-7-17 2.30 to 3.20
Different formats of Date and Time display 27-7-17 10.05 to 10.55
sorting 31-7-17 01.40 to 02.30Sequences 31-7-17 01.40 to 02.30
Generating Summary 1/8/2017 09.15 to 10.15
Variables and constants 7/8/2017 01.40 to 02.30
Data types 9/8/2017 11.10 to 12.00Operators 10/8/2017 10.05 to 10.55Functions 17-8-17 10.05 to 10.55
Arrays 19-8-17 11.10 to 12.00String Manipulation 21-8-17 2.30 to 3.20
Files 23-8-17 11.10 to 12.00File handling 24-8-17 10.05 to 10.55
LDAP 29-8-17 09.15 to 10.05Sending and receiving
mails 28-8-17 01.40 to 02.30
Python Introduction 6/9/2017 11.10 to 12.00Syntax and Style 6/9/2017 11.10 to 12.00
Variables & Constants 7/9/2017 2.30 to 3.20Numbers 7/9/2017 2.30 to 3.20Strings 11/9/2017 2.30 to 3.20Lists 12/9/2017 09.15 to 10.15
Tuples 12/9/2017 09.15 to 10.15Dictionaries 13-9-17 11.10 to 12.00
Conditionals statements 14-9-17 12.00 to 12.50
Loops 14-9-17 12.00 to 12.50Files – Input and
Output 25-9-17 2.30 to 3.20
Errors and Exceptions 26-9-17 09.15 to 10.15Functions 27-9-17 11.10 to 12.00Modules 27-9-17 11.10 to 12.00
Classes and OOP 3/10/2017 09.15 to 10.05Perl features 3/10/2017 09.15 to 10.15
Perl components 4/10/2017 11.10 to 12.00Parsing rules 5/10/2017 2.30 to 3.20
Arrays 5/10/2017 2.30 to 3.20Hash 5/10/2017 2.30 to 3.20
File handling utilities- Cat 28-11-17 10.05 to 10.55
K. Sangeeta102
OSS FF-12
D-Block / Computer Science
Engineering
Pwd 29-11-17 2.30 to 3.20who 29-11-17 2.30 to 3.20
who am I 29-11-17 2.30 to 3.20Relative & absolute 29-11-17 2.30 to 3.20
man 30-11-17 12.00 to 12.50mkdir 30-11-17 12.00 to 12.50
CP 30-11-17 12.00 to 12.50mv 30-11-17 12.00 to 12.50rm 30-11-17 12.00 to 12.50
Link(ln) & unlink 7/12/2017 12.00 to 12.50Text processing utilities 13-12-17 2.30 to 3.20
Network utilities 16-12-17 9.15 to 10.05Backup utilities 20-12-17 2.30 to 3.20Text processing
utilities 22-12-17 1.40 to 2.30
Shell metacharacters 2/1/2018 10.05 to 10.55Shell commands 3/1/2018 2.30 to 3.20
Control structures 4/1/2018 11.10 to 12.50Unix file structures 11/1/2018 10.05 to 10.55
System calls related to file handling 18-1-18 10.05 to 10.55
System calls 20-1-18 9.15 to 10.05Process related system
calls 23-1-18 10.05 to 10.55
Standard I/O library 24-1-18 2.30 to 3.20Formatted I/O 25-1-18 12.00 to 12.50Formatted I/O 31-1-18 2.30 to 3.20
Process 12/2/2018 12.00 to 12.50Fork 17-2-18 9.15 to 10.05
Vfork 17-2-18 9.15 to 10.05Wait 20-2-18 10.05 to 10.55Exec 20-2-18 10.05 to 10.55Exit 21-2-18 2.30 to 3.20
Signal 21-2-18 2.30 to 3.20Signal function 21-2-18 2.30 to 3.20
Kill 22-2-18 12.00 to 12.50Raise 27-2-18 10.05 to 10.55Pause 27-2-18 10.05 to 10.55
System 27-2-18 10.05 to 10.55Abort 28-2-18 2.30 to 3.20
Sleep & alarm function 28-2-18 2.30 to 3.20
Protocols and standards 23/6/2017 1.40 to 2.30
Layered tasks 23/6/2017 2.30 to 3.20OSI reference model 27/6/2017 9.15 to 10.05Elementary datalink
protocol 18/7/17 11.10 to 12.00
Sliding window protocols 25/7/17 1.40 to 2.30
Examples datalink protocol- HDLC 27/7/17 9.15 to 10.05
Network layer design issues 10/8/2017 11.10 to 12.00
Services to transparent layers 10/8/2017 9.15 to 10.05
Connectionless & connection oriented
services11/8/2017 11.10 to 12.00
General principle of congestion 5/9/2017 12.00 to 12.50
Services to upper layers 15/9/17 1.40 to 2.30
Service primitives 19/9/17 9.15 to 10.05Elements of transport
protocols 19/9/17 11.10 to 12.00
UDP protocol 26/9/17 12.00 to 12.50TCP protocol 26/9/17 1.40 to 2.30
SF-20
D-Block / Computer Science
Engineering
CN (III-B.Tech-I Sem)
Unix Programming(IIIC
SE-IISem)SF-12
D-Block / Computer Science
Engineering
Application layer-DNS 3/10/2017 9.15 to 10.05Resources records &
name services 5/10/2017 11.10 to 12.00
Message format 10/10/2017 12.00 to 12.50Message transfer &
Final delivery 12/10/2017 1.40 to 2.30
Multiprocessor & Multicomputer 9/12/2017 9.15 to 10.05
Data representation Fixed-point
representation11/12/2017 11.10 to 12.00
Addition algorithms 12/12/2017 1.40 to 2.30Register transfer 5/1/2018 11.10 to 12.00
Bus transfer 6/1/2018 1.40 to 2.30Memory transfer 8/1/2018 9.15 to 10.05
Instruction formats 30/1/2018 11.10 to 12.00Addressing modes 2/2/2018 1.40 to 2.30Program control 3/2/2018 11.10 to 12.00
Reduced instruction set computer 5/2/2018 12.00 to 12.50
Virtual memory 17/2/2018 1.40 to 2.30DMA controller and
transfer 5/3/2018 9.15 to 10.05
Pipelining Arithmetic 6/3/2018 11.10 to 12.00Instruction pipeline 9/3/2018 1.40 to 2.30
Inter-processor communication 16/3/2018 1.40 to 2.30
Synchronization 17/3/2018 9.15 to 10.05
Operations 9/12/2017 2.30 to 3.20
Multi Thread programming models 11/12/2017 9.15 to 10.05
Process scheduling criteria 12/12/2017 11.10 to 12.00
Deadlock avoidance 5/1/2018 1.40 to 2.30Recovery from
deadlock 6/1/2018 2.30 to 3.20
Process synchronization 8/1/2018 9.15 to 10.05
Monitors 30/1/2018 11.10 to 12.00Synchronization
examples 2/2/2018 1.40 to 2.30
Memory Management-Swapping 3/2/2018 11.10 to 12.00
Contiguous memory allocation 5/2/2018 12.00 to 12.50
Files sharing & protection 27/2/2018 2.30 to 3.20
File system structure 3/3/2018 9.15 to 10.05File system
implementation 5/3/2018 11.10 to 12.00
Disk scheduling-FIFO,SCAN 16/3/2018 1.40 to 2.30
Disk scheduling-C-SCAN,LOOK 17/3/2018 2.30 to 3.20
Block & Character devices 17/3/2018 9.15 to 10.05
loops 27-09-17 12.50 to 1.40Break and Continue
statements 4/10/2017 12.50 to 1.40
String manipulations 26-10-17 9.15 to 10.05Recursion 1/11/2017 9.15 to 10.05
unions 21-11-17 11.00 to 11.50Random access
functions 29-11-17 12.50 to 1.40
Linear Searching 27-01-18 10.05 to 11.00Binary search 5/2/2018 10.05 to 11.00
SF-10
D-Block / Computer Science
Engineering
SF-09
D-Block / Computer Science
Engineering
103 G. Vijay KumarCO&A (II-
B.Tech-II Sem)
OS (II-B.Tech-II Sem)
104 M.Yugandhar
FF-10
D-Block / Computer Science
Engineering
D-Block / Computer
CP (B. Tech-I Sem)
DS (B. Tech-II
Stack operations 17-02-18 12.50 to 1.40Queue operations 6/3/2018 12.50 to 1.40Circular linked list 21-03-18 10.05 to 11.00Graph traversals 19-04-18 02.30 to 03.20
Achieving required quality 8/12/2017 10.05 to 10.55
The old and new 11/12/2017 2.30 to 3.20The principal es of
conventional software engineering
12/12/2017 1.40 to 2.30
principal es of modern software engineering 14-12-17 1.40 to 2.30
Transitation to an iterative process 15-12-17 10.05 to 10.55
Transitation to an iterative process 20-12-17 1.40 to 2.30
Elaboration phase 5/1/2018 10.05 to 10.55Production phase 8/1/2018 2.30 to 3.20Contruction phase 10/1/2018 10.05 to 10.55Transitation phase 11/1/2018 2.30 to 3.20
Technical perspective 22-1-18 2.30 to 3.20Work flow of the
process 24-1-18 2.30 to 3.20
Software work flow s 25-1-18 2.30 to 3.20Check point of the
process 29-1-18 2.30 to 3.20
Major milestones 31-1-18 10.05 to 10.55Minor milestones 1/2/2018 10.05 to 10.55Periodic ststus
assessment 2/2/2018 10.05 to 10.55
Periodic ststus assessment 5/2/2018 2.30 to 3.20
Project orginization and responsibility 19-2-18 2.30 to 3.20
Line of business orginization 21-2-18 2.30 to 3.20
Project orginization 22-2-18 10.05 to 10.55Evolution orginization 23-2-18 10.05 to 10.55Process automation
:the project environment
26-2-18 2.30 to 3.20
Metric automation 8/3/2018 10.05 to 10.55Tailoring the process 9/3/2018 10.05 to 10.55Process discriminates 12/3/2018 2.30 to 3.20
Display system replacement 16-03-18 10.05 to 10.55
Ccpds-r 19-03-18 2.30 to 3.20OSI REFERENCE
MODEL 28-06-2017 9.15 to .10.05
TCP/IP REFERENCE MODEL 29-06-2017 10.05 TO 10.55
ADDRESSING 10/7/2017 1.40 to.2.30Elementary data link
protocol 17-07-17 1.40 to.2.30
Sliding window protocol 19-07-17 9.15 to .10.05
Go back n protocol 20-07-17 10.05 TO 10.55Lan ,bridges 31-07-17 1.40 to.2.30
Source routing and remote bridges 3/8/2017 10.05 TO 10.55
Congestion control algoritham 21-08-17 9.15 to .10.05
COMPUTER NETWORKS Sf-19 D- CSE
105 Sri.T.Ravi kumar
FF-10 Computer Science
Engineering
Transitation to an iterative process 18-12-17 2.30 to 3.20
DS (B. Tech-II Sem)
Software PEROJECT
MANAGEMENTSF-19 D- CSE
Congestion prevention polices 23-08-17 9.15 to .10.05
Network layer in internet 24-08-17 10.05 TO 10.55
Elements of transport protocol 4/9/2017 1.40 to.2.30
Connection estblishment 6/9/2017 9.15 to .10.05
Udp,tcp protocol 14-09-17 11.10 to 12.00e-mail architecture 26-09-17 11.10 to 12.00
e-mail services 26-9-17 1.40 to.2.30Message formsat 27-10-17 9.15 to .10.05
predicates 20-12-2017 10.05 to 10.55Path predicate 21-12-17 10.05 to 10.55
Path sensitization 2/1/2018 9.15 to .10.05Data flow testing 10/1/2018 11.10 to 12
Domain testing 30-1-18 11.10 to 12Domain and paths 24-1-18 10.05 to 10.55
Nice and ugly domainPath expression 10/2/2018 11.10 to 12
Kv charts 22-2-18 10.05 to 10.55State graphs 26-2-18 11.10 to 12State testing 8/3/2018 11.10 to 12
Power of matrixs 19-3-18 11.10 to 12Creation of test scriprt 21-3-18 11.10 to 12Synchrous of test cases 27-3-18 10.05 to 10.55Performance testing of data based application
and htttp29-03-17 11.10 to 12
GSM Services & System Architecture 12.07.17 1.40 to 2.30
Motivation for specialized MAC 27.07.17 2.30 to 3.20
Near and Far Terminals 31.07.17 9.15 to 10.05
Goals and assumptions mobile IP 16.08.17 9.15 to 10.05
Entities and Terminology mobile IP 28.08.17 9.15 to 10.05
Registration mobile IP 07.09.17 1.40 to 2.30Traditional TCP 19.09.17 1.40 to 2.30
Security in MANET 04.10.17 1.40 to 2.30MANET Routing
algorithms 04.10.17 2.30 to 3.20
2.30-3.20&3.20-4-10
Software testing metholodologies ff-20 D- CSE
Achiable path 21-12-17 11.10 to 12
Data flow testig strategies 10/1/2018
9:15-10:05
Addressing Modes 30/01/2018
Virtual memory 12/2/2018 10:05-10:55
DMA controller and transfer 2/3/2018 10:05-10:55
MC (IV –I B.Tech SEC-B)
5/3/2018
COA (II B. Tech-IISem)
D-Block / Computer Science
Engineering
Pipeline arithmetic 9:15-10:05
Interconnection 19/03/2018
12 to 12.50
25-1-18 10.05 to 10.55
106 T.Prabhakara rao FF-19
D-Block / Computer Science
Engineering
107 Sri P.K.Sahu
Functional unit of basic computer
organization27/11/2017 9:15-10:05
SF-11
Floating point arithmetic operation 19/12/2017 2:30-3:20
Bus and memory transfer 8/1/2018 9:15-10:05
vi editor 20/11/17 10.05 to 11.00
Architecture of UNIX OS 21/11/17 2.30 to 3.20
How to login UNIX system 23/11/17 1.40 to 2.30
file handling utilities ps, who, w 25/11/17 11.10 to 12.00
file handling utilities cp, mv, ln, rm, unlink,
mkdir, rmdir27/11/17 10.05 to 11.00
securityand file permissions
chmod,chown,chgrp , octal approach
process utilities ps, ps -l, ps -AL, 30/11/17 1.40 to 2.30
Backup utilities tar zip gzip cpio 1/12/2017 11.10 to 12.00
disk utilities du, df, mount, umount, find,
unmask, ulimit4/12/2017 10.05 to 11.00
networking commands inger, arp, ftp, telnet,
rlogin,5/12/2017 2.30 to 3.20
Unix Utilities cat, tail, head, sort, nl, uniq,
grep, egrep, fgrep, cut, paste, join, tee, pg,
comm, cmp, diff, tr, awk, tar, cpio.
7/12/2017 1.40 to 2.30
Tutorial 11/12/2017 11.10 to 12.00About Shell,
Working with the Bourne shell, C Shell,
Bash, Bsh , Kshwhat is a shell, shell
responsibilities, 14/12/17 2.30 to 3.20
Pipes ( | ) and input Redirection, output
redirection> , < ,>> , <<
here documents, the shell as a programming
language16/12/17 11.10 to 12.00
shell meta characters, shell variables 18/12/17 10.05 to 11.00
shell commands, 19/12/17 2.30 to 3.20control structures
if ... else loop ,if else if loop
if elif ...else loopexamples
control structurescase structure
examplescontrol structures
while loop examplesFor loop examples 3/1/2017 2.30 to 3.20
Until loop structure and examples 4/1/2017 1.40 to 2.30
Sample shell scripts 5/1/2017 11.10 to 12.00Sample shell scripts 6/1/2017 10.05 to 11.00Sample shell scripts 9/1/2017 10.05 to 11.00
Tutorial 11/1/2017 2.30 to 3.20
9:15-10:05structure 19/03/2018
28/11/17 2.30 to 3.20
12/12/2017 10.05 to 11.00
15/12/17 1.40 to 2.30
20/12/17 1.40 to 2.30
24/01/17 11.10 to 12.00
2/1/2018 10.05 to 11.00
Unix file structure, tree structure , root
directory17/02/17 1.40 to 2.30
Directory structure 18/01/17 11.10 to 12.00files and devices 19/01/17 10.05 to 11.00
System calls vs libraryfunctions
System calls ..open, creat, read,
write, close, lseek, stat, fstat, octl, umask, dup,
dup2System calls ..
stat, fstat, octl, umask, dup, dup2
The standard I/Ofopen, fclose, fflush,
fseek, fgetc, getc, getchar
The standard I/Ofputc, putc,
putchar,fgets, gets
File related system calls
chmod, chown, unlink, link, symlink
File related system calls
mkdir, rmdir, chdir, getcwd
Directory handling system calls (opendir,
readdir, closedir,rewinddir,
seekdir, telldir)
6/2/2017 10.05 to 11.00
Streams and file descriptors 7/2/2017 2.30 to 3.20
What is process, process structure
process commandsps, ps -al, ps -l, process
identifiers,starting new process,waiting for a process,
init processzombie process, process control, 10/2/2017 10.05 to 11.00
System callsfork, vfork, exit, wait, waitpid, exec, system.
Signals 17/02/17 1.40 to 2.30Signal functions,
Reliable and unreliable signals
19/02/17 11.10 to 12.00
interrupted system calls, kill and raise
functions20/02/17 10.05 to 11.00
alarm, pause functions, abort, sleep functions 22/02/17 10.05 to 11.00
interprocess Communication 24/02/17 2.30 to 3.20
Introduction to IPC-IPC between processes 26/02/17 1.40 to 2.30
108 B.vijay SF-17
D-Block / Computer Science
Engineering
22/01/17 2.30 to 3.20
23/01/17 1.40 to 2.30
UNIX PROGRAMMING
-CSE-C
25/02/17 11.10 to 12.00
27/01/17 10.05 to 11.00
29/01/17 2.30 to 3.20
1/2/2017 1.40 to 2.30
5/2/2017 11.10 to 12.00
8/2/2017 1.40 to 2.30
9/2/2017 11.10 to 12.00
15/03/17 2.30 to 3.20
IPC on single computer systems ,PC on multiple computer
systems
1/3/2017 11.10 to 12.00
Pipes, PIPE system calls full duplex , half
duplex12/3/2017 10.05 to 11.00
FIFOs , named fifo, unnamed fifo 13/03/17 10.05 to 11.00
Semaphores- 14/03/17 2.30 to 3.20Unix system-V
semaphoressemaphore programs
unix kernel support for semaphoresprograms
Message queus and related system calls 17/03/17 10.05 to 11.00
Shared memory and related system calls 19/03/17 2.30 to 3.20
Studying Java.sql package, Studying Javax.sql package
12-06r-18 11.10 to 12.00
Program to insert data into a mysql tables. 19-06-18 10.05 to 10.55
Statement,Prepared Statement 21-06r-18 1.40 to 2.30
images, forms 12-Jan-18 10.05 to 10.55Frames 18-Jan-18 1.40 to 2.30
Cascading Style sheets 19-Jan-18 12.to 12.55Introduction to Java
Script 17-Feb-18 9.15 to 10.05
Basic Memory Hierarchy 27-10-17 11.10 to 12.00
Pip Lined Cache 6/11/2017 10.05 to 10.55Risc Architecture 14-11-17 10.05 to 10.55
Asynchronous 22-11-17 01.40 to 02.30
9.15 to 10.05 a.mLL(1)Parser 18-07-17 1.40 to 2.30 p.mLR parsing 24-07-17 9.15 to 10.05 a.m
LALR parsing 26-07-17 10.05 to 10.55 a.m
Loop Optimization 15-09-17 9.15 to 10.05 a.mData Flow analysis 22-09-17 1.40 to 2.30 p.m
Machine Dependent code opti. 4/10/2017 2.30 to 3.20p.m
NFA with ɛ moves 1/12/2017 10.05 to 10.55 am Conversion from NFA
to DFA 6/12/2017 12.00 to 12.50 pm
Minimization of DFA 8/12/2017 12.00 to 12.50 pmConversion from Moore to Mealy
machines13-12-17 11.10 to 12.00 pm
Conversion from Finite automata to regular expressions
21-12-17 10.05 to 10.55 am
25-07-17 1.40 to 2.30 p.m
Local Optimization 13-09-17 2.30 to 3.20p.m
1.40 to 2.30
16/03/17 11.10 to 12.00
112 Sri D.Prakash Rao Compiler Design (III B.Tech I Sem.)
First and Follow
109 Dr. TPR VittalWT
(I M.Tech. II Sem) SF-12D- Block
CSE
110 Sri D. Santosh RajuWT
(III CSE II Sem) SF-19
D-Block Computer Science
Engineering
SF-12 D-BlockCSE
ACA(I M.Tech. I Sem)Sri P. Sai Vijay111
15/03/17
D-Block/ CSE
14-07-17
SF-17
SLR parsing
Conversion from regular expressions to Finite automata(F.A)
8/1/2018 1.40 to 2.30
Convert from F.A to R.G 9/1/2018 1.40 to 2.30
Greibach Normal form 31-01-18 1.40 to 2.30Equivalence of CFL
and PDA 8/2/2018 1.40 to 2.30
Equivalence of PDA and CFL 9/2/2018 1.40 to 2.30
Computable functions 20-02-18 1.40 to 2.30Counter machine
,Types of TMs 23-02-18 1.40 to 2.30
NFA with ɛ moves ,Significance, acceptance of
languages
5/12/2017 9.15 to 10.05 a.m
Conversion from NFA with E moves to NFA
without e-moves 6/12/2017 10.05 to 10.55 am
Conversion from NFA to DFA 9/12/2017 10.05 to 10.55 am
Minimization of DFA 13-12-17 2.30 to 3.20p.mConversion from Moore to Mealy
machines16-12-17 2.30 to 3.20p.m
Conversion from Mealy to Moore
machines19-12-17 1.40 to 2.30 p.m
Conversion from Finite automata to regular expressions
2/1/2018 1.40 to 2.30 p.m
Conversion to Regular exp. To Finite
Automata3/1/2018 2.30 to 3.20p.m
20-01-18
and
30-01-18Minimization of CFG 13-02-18 2.30 to 3.20p.m
Greibach Normal Form 15-02-18 2.30 to 3.20p.m
Pushdown automata(PDA) 1/3/2018 1.40 to 2.30 p.m
INterconversion(PDA to CFL and CFG to
PDA)
06-03-18 and 07-03-18 9.15 to 10.05 a.m
Types of Turing Machines 20-03-18 1.40 to 2.30 p.m
Chomsky Hierarchy languages and
recognizers 21-03-18 9.15 to 10.05 a.m
Post Corespondence Problem(PCP) 24-03-18 1.40 to 2.30 p.m
Operating System Introduction ,Types of Operating Systems and
goals
12/6/2017 9.15 to 10.05
Process Management ,Scheduling 14-06-17 1.40 to 2.30
Uniprocessor Scheduling Algorithms 16-06-17 12.00 to 12.50
SJF,FCFS Algorithms 17-06-17 10.05 to 10.55Priority, Round Robin
Algorithms 19-06-17 9.15 to 10.05
113 Sri Y. Appala Raju FLAT (B.Tech, II-IIsem)
Equivalence b/w Regular Grammar to finite automata and
vice versa
1.40 to 2.30 p.m
SF-11 D-Block / CSE
Algorithm Evaluation of Priority Scheduling 21-06-17 1.40 to 2.30
RRB Algorithm and algorithm evaluation 23-06-17 12.00 to 12.50
Multi threaded Programming Model 24-06-17 10.05 to 10.55
Process Synchronization 28-06-17 9.15 to 10.05
Peterson solution and bankers algorithm 30-06-17 1.40 to 2.30
Hardware supporting to process
synchronization10/7/2017 12.00 to 12.50
semaphores 12/7/2017 10.05 to 10.55Critical regions 14-07-17 9.15 to 10.05
Monitors 15-07-17 1.40 to 2.30Principles of deadlocks 17-07-17 12.00 to 12.50Deadlock Prevention and bankers algorithm 19-07-17 10.05 to 10.55
Contiguous memory location 24-07-17 9.15 to 10.05
Paging 26-07-17 1.40 to 2.30Paging Algorithms 28-07-17 12.00 to 12.50Segmentation and space Allocation 29-07-17 10.05 to 10.55
Basics of linking and loading 31-07-17 9.15 to 10.05
Demand Paging 2/8/2017 1.40 to 2.30Page Replacement
Algorithms 4/8/2017 12.00 to 12.50
LIFO and FIFO Algorithms 5/8/2017 10.05 to 10.55
Analysis of paging allocation policies 7/8/2017 9.15 to 10.05
Working set 9/8/2017 1.40 to 2.30File system interface,
file allocation Mechanisms
10/8/2017 12.00 to 12.50
File system Mounting 12/8/2017 10.05 to 10.55File system Protection 14-08-`7 9.15 to 10.05
File system implementation and
structure16-08-17 1.40 to 2.30
File system implementation,
directory implementation
18-08-17 12.00 to 12.50
File Allocation methods 19-08-`7 10.05 to 10.55
File space management 21-08-18 9.15 to 10.05File space management 23-08-17 1.40 to 2.30
File Allocation methods 26-08-17 12.00 to 12.50
File Allocation methods 28-08-17 10.05 to 10.55
I/O System-Disk Scheduling 4/9/2017 9.15 to 10.05
Disk Scheduling 5/9/2017 1.40 to 2.30Disk Scheduling and
device drives 7/9/2017 12.00 to 12.50
Device drivers 9/9/2017 10.05 to 10.55Block and Character
Devices 11/9/2017 9.15 to 10.05
Block and Character Devices 13-09-17 1.40 to 2.30
Switching tasks 15-09-17 12.00 to 12.50Protection 16-09-17 10.05 to 10.55
114 Smt. Prasanthi SF-17
D-Block / Computer Science
Engineering
OS (B. Tech-III-I Sem-C)
Security 18-09-17 9.15 to 10.05Security 20-09-17 1.40 to 2.30
Accessibility 22-09-17 12.00 to 12.50Capability lists 23-09-17 10.05 to 10.55Capability lists 25-09-17 9.15 to 10.05Capability lists 27-09-17 1.40 to 2.30
Layers in OSI model 9/10/2017 11:10-12:00Medium Access
Control 20/10/2017 9:15-10:05Routing Alg. 3/11/2017 9:15-10:05
IP V4 datagram 16/11/2017 10:05-10:55IP V6 addressing 20/11/2017 10:05- 10:55
Client Server Paradigm 5/12/2017 11:10-12:00Topic Date of the class Time of the class
Introduction to HTML 20-11-17 10.05-10.55Lists, Tables 21-11-17 12.00-12.50Lists, Tables 22-11-17 3.20-4.10Tags, Frames 23-11-17 9.15-10.05
Frames 24-11-17 2.30-3.20Frames 27-11-17 10.05-10.55Frames 28-11-17 12.00-12.50
CSS Sheets 29-11-17 3.20-4.10Introduction to Java
Script 30-11-17 9.15-10.05
Events & Objects in Java Script 1/12/2017 2.30-3.20
Dynamic HTML with Java Script 4/12/2017 10.05-10.55
XML- Document Type Definition 5/12/2017 12.00-12.50
XML Schemas 6/12/2017 3.20-4.10Document Object
Model 7/12/2017 9.15-10.05
Presenting XML 8/12/2017 2.30-3.20Installing the Java
Software Development Ki
11/12/2017 10.05-10.55
Tomcat Server & Testing Tomcat 12/12/2017 12.00-12.50
Introduction to Servlets 13-12-17 3.20-4.10Lifecycle of a Servlet 14-12-17 9.15-10.05
The Servlets API 15-12-17 2.30-3.20The Servlets API 16-12-17 10.05-10.55The javax.servlet
Package 18-12-17 12.00-12.50
Reading Servlets parameters 19-12-17 3.20-4.10
Reading Servlets parameters 20-12-17 9.15-10.05
Problem with servlet 2/1/2018 2.30-3.20The Anatomy of a JSP
Page 3/1/2018 10.05-10.55
JSP Processing 4/1/2018 12.00-12.50JSP Application
Design with MVC 5/1/2018 3.20-4.10
JSP Application Design with MVC 8/1/2018 9.15-10.05
JSP Application Design with MVC 9/1/2018 2.30-3.20
Generating Dynamic Content in java
application development
10/1/2018 10.05-10.55
Generating Dynamic Content in java
application development
11/1/2018 12.00-12.50
115 Sri A. Dasaradha CN ( I M.TECH CSE) SF-12
D-Block / Computer Science
Engineering
Sri K. Siva Krishna116
Web Technologies (B. Tech-III-II Sem-
A)
SF-19
D-Block / Computer Science
Engineering
Using Scripting Elements 12/1/2018 3.20-4.10
Using Scripting Elements 22-01-18 9.15-10.05
Displaying Values Using an Expression to
Set an Attribute23-01-18 2.30-3.20
Declaring Variables and Methods Error
Handling24-01-18 10.05-10.55
Users Passing Control and Date between
Pages25-01-18 12.00-12.50
Users Passing Control and Date between
Pages26-01-18 3.20-4.10
Users Passing Control and Date between
Pages29-01-18 9.15-10.05
Methods of Error Handling 30-01-18 2.30-3.20
Debugging Sharing Data Between JSP
pages31-01-18 10.05-10.55
Methods of Error Handling 1/2/2018 12.00-12.50
Jsp Objects 2/2/2018 3.20-4.10Conditional processing 5/2/2018 9.15-10.05
Database Access 6/2/2018 2.30-3.20Database
Programming using JDBC
7/2/2018 10.05-10.55
Database Programming using
JDBC13-02-18 12.00-12.50
Java SQL Pages 14-02-18 3.20-4.10Java SQL Pages 15-02-18 9.15-10.05
Java SQL Packages 16-02-18 2.30-3.20JDBC Connectivity 19-02-18 10.05-10.55
Database for JSP Page 20-02-18 12.00-12.50Database Programming 21-02-18 3.20-4.10Database Programming 22-02-18 9.15-10.05
JDBC Connections 23-02-18 2.30-3.20Application specific
database access 26-02-18 10.05-10.55
Topic Date of the class Time of the class
Data Mining Introduction 21-11-17 9.15-10.05
Motivating challenges of data mining 22-11-17 1.40-2.30
Data Mining Techniques 23-11-17 11.10-12.00
Types of data sets 25-11-17 10.05-11.00Data Preprocessing 26-11-17 9.15-10.05Basics of similarity
and dissimilarity 29-11-17 1.40-2.30
examples of proximity measures 30-11-17 11.10-12.00
Jaccard coefficient, correlation 2/12/2017 10.05-11.00
Data set, summary statistics 5/12/2017 9.15-10.05
Data Warehouse, Multidimensional Data
Model6/12/2017 1.40-2.30
117 Sri. K.V.Chandra Sekhar DMDW (B. Tech-III-II Sem-B) SF-19
D-Block / Computer Science
Data Warehouse Architecture 7/12/2017 11.10-12.00
Data Warehouse Implementation 9/12/2017 10.05-11.00
From Data Warehousing to Data
Mining12/12/2017 9.15-10.05
Concept Description 13-12-17 1.40-2.30Characterization 14-12-17 11.10-12.00
Data Generalization and Summarization 16-12-17 10.05-11.00
Analytical Characterization 19-12-17 9.15-10.05
Analysis of Attribute Relevance 20-12-17 1.40-2.30
Mining Class Comparisons 26-12-17 11.10-12.00
Discriminating between Different
Classes27-12-17 10.05-11.00
loops 24-09-17 12.50 to 1.40Break and Continue
statements 6/10/2017 12.50 to 1.40
String manipulations 22-10-17 9.15 to 10.05Recursion 3/11/2017 9.15 to 10.05
unions 22-11-17 11.00 to 11.50Random access
functions 27-11-17 12.50 to 1.40
X.509 Directory Authentication 1/2/2018 10:05-10:55
RFC 802,MIME 6/2/2018 15:20-16:10AH 20/02/2018 15:20-16:10
ESP protocol 27/02/2018 15:20-16:10SSL architecture 5/3/2018 11:10-12:00
Web security consideration 5/3/2018 11:10-12:00
TLS 8/3/2018 10:05-10:55Intrusion technique 8/3/2018 15:20-16:10
Password management 9/3/2018 13:40-14:30Firewall 15/03/2018 10:05-10:55
Firewall types 15/03/2018 15:20-16:10Trusted system 16/03/2018 13:40-14:30
120 Sri B. Kameswara Rao OOAD (I M.Tech. II Sem)
Creation Design Pattern
Behavioral Design Pattern
30-06-18 10.05 to 12.00 SF-12
D-Block / Computer Science
EngineeringDemonestrate vi editor 20-06-2018 12.00 – 12.50 PM Demonestrate How to
login UNIX system 22-06-2018 10.05 – 10.55 AM
Demonestrate file handling utilities ps,
who, w23-06-2018 11.10 – 12.00 PM
Demonestrate file handling utilities cp, mv, ln, rm, unlink,
mkdir, rmdir
21-06-2018 12.00 – 12.50 PM
Demonestrate Security and file permissions
chmod,chown,chgrp , octal approach
22-06-2018 12.00 – 12.50 PM
Demonestrate Unix Utilities tail, head, sort, nl, uniq, grep, egrep, fgrep, cut,
paste, join, tee, pg, comm, cmp, diff, tr,
awk, tar, cpio.
26-06-2018 12.00 – 12.50 PM
118 P.Srinivas Rao SF-12
D-Block / Computer Science
Engineering
119 P. Sasibushana Rao NSC(III CSE-IIsem) SF20
III-II Sem-B) Science Engineering
CP (B. Tech-I Sem)
D-Block / Computer Science
Engineering
Demonestrate process utilities ps, ps -l, ps -
AL,29-06-2018 12.00 – 12.50 PM
Demonestrate control structures
if ... else loop ,if else if loop
if elif ...else loopexamples
Demonestrate control structures
case structureexamples
Demonestrate control structures
while loop examplesDemonestrate For loop
examples 31-07-2018 12.00 – 12.50 PM
Demonestrate Until loop structure and
examples1/8/2018 12.00 – 12.50 PM
Demonestrate Live execution of Sample
shell scripts3/8/2018 10.05 – 10.55 AM
Demonestrate to write programs of System
calls ..open, creat, read,
write, close, lseek, stat, fstat, octl, umask, dup,
dup2Demonestrate to write programs of System
calls ..stat, fstat, octl, umask,
dup, dup2Show create Unix Process, zombie process, process
control,
11/9/2018 11.10 – 12.00 PM
Show What is process, process structure
process commandsps, ps -al, ps -l, process
identifiers,Create starting new
process, by using fork system call
waiting for a process,init process
Explain Signals,Signal functions 24-09-2018 1.40 – 2.30 PM
Show how to send kill and raise signals by
suing functions25-09-2018 12.00 – 12.50 PM
Demonestrate interprocess
Communication, Introduction to IPC-
IPC between processes
28-09-2018 10.05 – 10.55 AM
Demonestrate IPC on single computer systems ,PC on
multiple computer systems
29-09-2018 11.10 – 12.00 PM
D-Block / Computer
science Engineering
25-07-2018 12.00 – 12.50 PM
27-07-2018 10.05 – 10.55 AM
28-07-2018 11.10 – 12.00 PM
13-08-2018 2.30 – 3.20 PM
14-08-2018 12.00 – 12.50 PM
12/9/2018 12.00 – 12.50 PM
14-09-2018 10.05 – 10.55 AM
121 K.Eswara Rao UNIX INTERNALS SF-19
Demonestrate Pipes, PIPE system calls full
duplex , half duplex3/10/2018 12.00 – 12.50 PM
Demonestrate FIFOs , named fifo, unnamed
fifo4/10/2018 3.20 - 4.10 PM
Objects as function arguments 16-08-17 11.10 to 12.00
Call by reference 16-08-17 12.00 to 12.50Default arguments in
constructors 21-08-17 11.10 to 12.00
Copy constructors 21-08-17 12.00 to 12.50Multi level and Hybrid
Inheritance 6/9/2017 11.10 to 12.00
Multiple and Hierarchical 6/9/2017 12.00 to 12.50
Unary operator overloading 13-09-17 11.10 to 12.00
Binary operator overloading on strings 13-09-17 12.00 to 12.50
Copying one file into another file 11/10/2017 11.10 to 12.00
Templates 11/10/2017 12.00 to 12.50
Articulation point and algorithm 5/8/2017 11.10 to 12.00
0/1 Knapsack problem 10/8/2017 10.05 to 10.55
Matrix chain multiplication 17-08-17 11.10 to 12.00
Matrix chain multiplication 17-08-17 12.00 to 12.50
Optimal binary search tree 18-08-17 11.10 to 12.00
Traveling salesman problem 26-08-17 10.05 to 10.55
All pairs shortest path 26-08-17 11.10 to 12.00
N-Queen problem 11/9/2017 01.40 to 02.30Sum of subsets
problem 14-09-17 10.05 to 10.55
FIFO knapsack problem 5/10/2017 10.05 to 10.55
NP-Hard and NP complete problems: 6/10/2017 09.15 to 10.05
NP-Hard and NPC classes, cooks theorem 7/10/2016 11.10 to 12.00
II–-A Internet of things(iot) 14-07-2017 13:40-3:20 SF-11
13-07-2017
Big data analytics 23-08-17 11:10-12:50 Olap,oltp.rtap 24-08-2017 13:40-3:20
Big data analytics 20-09-17 13:40-3:20Characteristics of big
data 21-09-17 10:05-12:00
HARNESSING BIG DATA 6/10/2017 11:10-12:50
Inter net of things 6/2/2018 11:10-12:50Inter net of things 7/2/2018 13:40-3:20
HARNESSING BIG DATA 7/10/2017 11:10-12:50
Cloud computing 29-11-17 11:10-12:50Characteristics of big
data 30-11-17 11:10-12:50
FF-17IV-A
Cloud computing 10:05-12:00
122 P.Ramkishor
OOP(II B. Tech - I
Sem)
DAA(III B. Tech - I
Sem)
SF-11
SF-17
D-Block / Computer Science
Engineering
HARNESSING BIG DATA 29-12-17 11:10-12:50
HARNESSING BIG DATA 23-01-2018 13:40-3:20
Characteristics of big data 23-08-17 13:40-3:20
Big data analytics 20-09-17 11:10-12:50Characteristics of big
data 21-09-17 13:40-3:20
Inter net of things 6/2/2018 13:40-3:20Challenges of handling
big data 7/10/2017 13:40-3:20
Cloud computing 29-11-17 13:40-3:20Big data 3 vs systems 28-12-17 13:40-3:20VISUALIZATION AND ANALYSIS 29-12-17 13:40-3:20
Cloud computing 25-01-2018 10:05-12:0013-07-2017
Cloud computing 14-07-2017 10:05-12:00
Big data 3 vs systems 24-08-2017 10:05-12:00HARNESSING BIG
DATA 6/10/2017 13:40-3:20
Inter net of things 7/2/2018 11:10-12:50Big data analytics 30-11-17
HARNESSING BIG DATA 28-12-17 10:05-12:00
Cloud computing 23-01-2018 10:05-12:00HARNESSING BIG
DATA 25-01-2018 13:40-3:20
Importance of Programming language 9/10/2017 10:05-12:00
Object oriented Scripting language in Development of web
Application
10/10/2017 13:40-3:20
Programming languages 9/2/2018 10:05-12:00
10/7/2017
Big Data and Application 24-11-17 10:05-12:00
C Programming 15-12-17 10:05-12:00Importance of
Programming language 9/10/2017 13:40-3:20
Programming languages 9/2/2018 13:40-3:20
10/7/2017
Fundamental of oops Concepts and examples 25-11-17 10:05-12:00
Java Programming Concepts 15-12-17 13:40-3:20
Data Structure and Alogrithms 11/7/2017 10:05-12:00
Importance of Programming language 10/10/2017 11:10-12:50
Data Visualization and analysis 16-12-17 13:40-3:20
Big Data &its Application 18-08-17 10:05-12:00
Big Data &its Application 19-08-2017 10:05-12:00
SF-13
FF-18
FF-19
D-Block / Computer Science
Engineering
D-Block / Computer Science
Engineering
II–BData Structure and
Alogrithms 13:40-3:20
II-C
IV-B
Cloud computing 13:40-3:20
IV-C
Sri.T.V.Sanotosh Kumar
II-A
Data Structure and Alogrithms 10:05-12:00
Sri.Malla Lakshmana Rao
SF-11
SF-12
123
124
Hadoop Technology Apache Hadoop 15-09-17 10:05-12:00
Hadoop Technology Apache Hadoop 15-09-17 13:40-3:20
Hadoop Technology Apache Hadoop 16-09-17 13:40-3:20
Web Application Development steps 24-11-17 13:40-3:20
Programming languages 10/2/2018 11:10-12:50
Big Data &its Application 18-08-17 13:40-3:20
3Vs Hadoop Concepts 25-11-17 13:40-3:20Programming
languages 3/1/2018 13:40-3:20
Programming languages 10/2/2018 13:40-3:20
Big Data &its Application 19-08-2017 13:40-3:20
Hadoop Technology Apache Hadoop 16-09-17 10:05-12:00
Hadoop and BiG Data 11/7/2017 13:40-3:20 Hadoop Technology
Apache Hadoop 2/1/2018 10:05-12:00
Big Data Analytics 16-12-17 10:05-12:00
IV–B Hadoop Technology Apache Hadoop 2/1/2018 13:40-3:20
IV–C Hadoop Technology Apache Hadoop 3/1/2018 10:05-12:00
ASA ORS system of tool designation 23-06-17 10.05 to 10.55
Chip formation - Orthogonal cutting, Merchant's Force
diagram
27-06-17 9.15 to 10.55
Machining time and power estimation,
Capstan and Turret lathes
9/8/2017 13.40 to 15.20
Automats - Single spindle 11/8/2017 10.05 to 10.55
Automats - Swiss type, Screw type and Multi
spindle16-08-17 13.40 to 15.20
Turret indexing mechanism, Bar feed
mechanism and Introduction to Shaper,
Planer and Slotter
18-08-17 9.15 to 10.55
Shaper and Planer 19-08-17 9.15 to 10.05Planer and Slotter, Types of Milling
operations and Types of Milling cutters
23-08-17 13.40 to 15.20
Indexing, Drilling, Drilling Quill
mechanism26-08-17 9.15 to 10.05
Reaming, Boring Broaching machines, Broach construction
6/9/2017 13.40 to 15.20
SF-17
SF-18
SF-19
FF-19
MC&MT (B. Tech-V Sem
'B')FF-08
E-Block / Mechanical Engineering
III–A
III–B
IV–A
III–C
Push, Pull, Surface and Continuous
Broaching machines, Abrasive processes,
Grinding wheel, Specifications and
selection
8/9/2017 9.15 to 10.55
Types of grinding processes - Cylindrical
grinding, Surface grinding
11/9/2017 10.05 to 10.55
Gear cutting, Forming, Gear generation and
Gear shaping20-09-17 13.40 to 15.30
Gear hobbing, Numerical control
machine tools - CNC types
22-09-17 10.05 to 10.55 and 11.10 to 12.00
Linear bearings, Ball screws, Spindle drives
and feed drives27-09-17 13.40 to 15.30
Part programming fundamentals, Manual
program4/10/2017 13.40 to 15.30
Measurement Through Comparators: Mechanical
comparators and their uses in mass production
17-02-18 11.10 to 12.00 FF-07E-Block /
Mechanical Engineering
Machine Tool Alignment Tests: Requirements of
machine tool alignment tests
6/3/2018 10.05 to 10.55
Alignment tests on lathe 9/3/2018 9.15 to 10.05
Alignment tests on milling machine and
Drilling Machine12/3/2018 11.10 to 12.00
Gear measuring instruments, Gear
tooth profile measurement,
Measurement of diameter, Pitch
13-03-18 10.05 to 10.55
Measurement of Pressure angle and
tooth thickness.16-03-18 9.15 to 10.05
Coordinate Measuring Machines: Types of CMM, Role of CMM
17-03-18 11.10 to 12.00
Applications of CMM. 19-03-18 11.10 to 12.00Revision of Imp.
Topics 20-03-18 10.05 to 10.55
Plant lay out 21-12-17 2.5 to 3.40Types of productions 22-12-17 12.00 to 12.50Types of plant lay out 2/1/2018 2.5 to 3.40
Travel chats 9/1/2018 2.5 to 3.40Work study,
Definition, Object. 11/1/2018 12.00 to 12.50
Various types of associated charts 23-01-18 2.5 to 3.40
Work sampling: Definition & Steps 1/2/2018 12.00 to 12.50
125 Dr. C. J. Rao
METROLOGY(B. Tech-VI Sem-
A)
126 Dr. D. Vishnumurthy
IE&M(B. Tech III-II
Sem) FF-07 E-Block ME Dept.
Time loss factor, Heat loss factor, Loss of
exhaust gas4/12/2017 12.00 to 12.50
Air standard / fuel air /actual cycles 16-12-17 10.05-10.55
Carburetor & working principles 16-12-17 13.40 to 14.30
Abnormal combustion detonation 5/1/2018 11.10 to 12.50
Diesel injection system – four stage combustion
7/1/2018 12.00 to 12.50
Problems on performance of IC
engine6/2/2018 10.05-10.55
Rotary compressor, Roots blower 5/3/2018 13.40 to 14.30
Concepts on Thermodynamics
Properties30-10-17 9.15-10.55
Air conditioning / Cooling towers 23-11-17 11.10 to 12.00
Power / Vapour cycles 14-12-17 12.00 to 12.50Vapour compression /
Vapour absorption 22-12-17 9.15-10.55
Thermo ionic power generation 11/1/2018 11.10 to 12.00
DOM(B. Tech III Sem-
1) Gyroscopic effect 24-07-2017 9.15-10.55 FF-08
FEM(B. Tech IV Sem-
1)
Introduction to computer
implementation to FEA packages
6/10/2017 1.40-3.20 FF-24
Pneumatics & hydraulic component,
circuits12/12/2017 9.15-10.55
Pneumatics & hydraulic component,
circuits13-12-2017 9.15-10.55
Automated material handling 6/2/2018 9.15-10.55
Types of Material handling 7/2/2018 9.15-10.55
Inspection methods, classification 21-2-18 9.15-10.55
Machine vision 26-2-18 10.05-10.55CMM 27-2-18 9.15-10.55
Transmissibility, principle of super
position08.09.17 10.05-10.50
Resolution of forces, types of supports 08.09.17 11.10-12.00
Free body diagrams 09.09.17 2.50-3.40Spatial force systems 25.09.17 10-11.30
Virtual Work 21.11.17 9.15-10.55C.G.of composite
solids 22.01.18 11.10-12.00
C.G.of composite bodies introduction to
M.I24.01.18 11.10-12.00
Concept of Instantaneous center
and plane motion12.04.18 11.10-12.00
128 Dr. D. Sreeramulu E-BlockME Dept.
AIM(B. Tech IV Sem-
I1)FF-17
129 Dr. D. Azad
IA(B. Tech-I Sem
'A')Engg.Mechanics
(Statics)
FF-27E-Block /
Mechanical Engineering
1A(B. Tech- I Sem-
B)Engg.Mechanics( FF-25
E-Block / Mechanical
127 Dr. N. Hari Babu
TE-I (II-B. Tech II-Sem FF-15 E-Block
ME Dept.
ATD(I-M. Tech I-Sem FF-13 E-Block
ME Dept.
Concepts & Application of
Instantaneous center method in crank and slider mechanism,
ladder, wheel rolling on plane
18.04.18 10.05-10.50
Definition of TQM, Need for Quality,
Dimensions and costs of Quality
13.06.17 11.10 to 12.50
Contribution of Quality Gurus. 16.06.17 11.10 to 12.50
Basic concepts of TQM, TQM frame
work.20.06.17 11.10 to 12.50
Contribution of Deming , Juran and
Crossby.23.06.17 11.10 to 12.50
Introduction to TQM Principals , customer
satisfaction , customer perception of quality , customer complaints ,
customer retention.
30.06.17 11.10 to 12.50
Employee involvement, Motivation,
Empowerment Teams.
11.07.17 11.10 to 12.50
Continuous process improvement, Juran
triology, PDSA cycle, 5S, Kaizen.
25.07.17 11.10 to 12.50
Quality Function Deployment, voice of
Customer, Information organization.
29.08.17 11.10 to 12.50
FMEA, Stages, process, design, documentation.
05.09.17 11.10 to 12.50
7 old statistical tools, 7 new management
tools. Bench marking, poka yoke.
08.09.17 11.10 to 12.50
Rosenbrock search methods 27-10-17 10.05-10.50
Polynomials – arithmetic 20-11-17 14.30 to 15.20
Application of dynamic programming 15-12-17 10.05-10.50
Simulation - introduction & types 5/1/2018 10.05-10.50
Random variables – distributions - mean 16-01-18 14.30 to 15.20
Gyroscopic Forces and Torque, Effects of
Gyroscopic couple in automobiles
27-07-17 11.10 to 12.50
Effects of Gyroscopic couple in ships 28-07-17 12.00 to 12.50
Effects of Gyroscopic couple in aeroplanes 31-07-17 9.15 to 10.05
Simple Block Brake and Internal
Expanding Brake21-08-17 9.15 to 10.05
131 A. Srinivasa Rao
CFD(M. Tech
(T.E)-II Sem)
FF-13E-Block /
Mechanical Engg. Dept.
DOM(B. Tech-V Sem-
A) FF-07E-Block /
Mechanical Engineering
Engg.Mechanics(Dynamics) Engineering
130 D. Lokanadham
TQM(B. Tech-VII Sem-
A) FF-17E-Block /
Mechanical Engineering
Band Brake and absorption type dynamometer
24-08-17 11.10 to 12.50
Transmission type dynamometer 28-08-17 9.15 to 10.05
Layouts in Automation 6/12/2017 9.15 to 10.55Automation Strategies 11/12/2017 10.05 to 10.55
Hydraulic and Pneumatic
Components used in automation
12/12/2017 9.15 to 10.55
Automation in Machine Tools 13-12-17 9.15 to 10.55
Feeding Devices 18-12-17 10.05 to 10.55Tool Changing Devices Control 19-12-17 9.15 to 10.55
Tool Changing Devices Control 20-12-17 9.15 to 10.55
Introduction to automated production lines and classification
2/1/2018 9.15 to 10.55
Work part transfer mechanisms 3/1/2018 9.15 to 10.55
Mechanical buffer storage and control
functions8/1/2018 10.05 to 10.55
Fabrication and design considerations 9/1/2018 9.15 to 10.55
Conveyor Systems and types 5/3/2018 10.05 to 10.55
Applications of Material Handling Systems and AGVS
6/3/2018 9.15 to 10.55
Automated Storage and retrieval systems
types13-03-18 9.15 to 10.55
Classification of Computer Aided Inspection, CMM
20-03-18 9.15 to 10.55
Rapid Prototyping - STL and SLS methods 27-03-18 9.15 to 10.55
LOM and 3D Printing 28-03-18 9.15 to 10.55Solar energy Introduction 16-10-17 11.10 to 12.00
Energy storage selective surfaces 30-10-17 11.10 to 12.00
Analytical Methods to estimate Thermal
Potential14-11-17 14.30 to 15.20
P-P Cycle carbon Cycle, Deuterium cycle 24-11-17 13.40 to 14.30
Wave Energy ; Waves – Theoretical Energy
Available – Calculation of period and phase velocity of
waves
22-01-18 13.40 to 14.30
Practical Considerations 25-01-18 14.30 to 15.20
Introduction to fluid power and hydraulic
symbols and fluid properties
12/6/2017 10.05 to 10.55
Pumping theory and gear pumps 13/6/17 1.40 to 2.30
132 P. Srihari
IA(B. Tech-VIII
Sem 'B') FF-24E-Block /
Mechanical Engg. Dept.
133 B. Rama Krishna
NCES( I M. Tech
(T.E)-I Sem)
FF-13E-Block /
Mechanical Engg. Dept.
Vane, piston pumps, classifications and
performance17/6/17 10.05 to 12.00
Types of dcvs, performance 18/7/17 1.40 to 2.30
Pressure control valve working 25/7/17 1.40 to 2.30
FCVs,types,working 29/7/17 10.05 to 12.00Speed control circuit 14/8/17 10.05-10.55Types of air control valves and working 11/9/2017 10.05 to 10.55
Position sensing pneumatic circuit 3/10/2018 1.40 to 2.30
Shaft couplings 22/12/17 9.15 to 12.50Cotter joints 29/12/17 9.15 to 12.50
Introduction to hydraulic and
pneumatics14-06-17 11.10 to 12.50
Different components in hydraulic system 16-06-17 9.15 to 10.05
Hydraulic fluids and hydraulic symbols 21-06-17 11.10 to 12.50
Pumping theory and gear pump 22-06-17 1.40 to 2.30
Piston pumps 23-06-17 9.15 to 10.05Hydraulic motor –gear
motor 30-08-17 9.15 to 10.05
Vene motor –piston motor 12/7/2017 11.10 to 12.50
Hydraulic actuators -construction 13-07-17 1.40 to 2.30
Pressure control valves 20-07-17 1.40 to 2.30Flow control valve 27-07-17 1.40 to 2.30
Accumulator functions 28-07-17 9.15 to 10.05Accumulator
applications and circuits
2/8/2017 11.10 to 12.50
Clamping circuits 10/8/2017 1.40 to 2.30Speed control circuits 11/8/2017 9.15 to 10.05
Meter in and meter out circuits 16-08-17 11.10 to 12.50
Standard manifold dual circuit 17-08-17 1.40 to 2.30
Pneumatic symbols 7/9/2017 1.40 to 2.30Speed control circuits 5/10/2017 11.10 to 12.50Working and Screen Co- ordinate system 17/6/17 9.15 to 10.05
Mapping of Geometric models 28/6/17 11.10 to 12.00
Projections of Geometric models 10/7/2017 1.40 to 02.30
Geometric Modeling : Wireframe Models 12/7/2017 11.10 to 12.00
Solid models-Solid Entities 24/7/17 1.40 to 2.30
Solid Representation 26/7/17 11.10 to 12.00Basic components of
NC system 3/8/2017 10.05 to 10.55
Types of NC control system 5/8/2017 9.15 to 10.55
NC Part Programming Methods 14/8/17 1.40 to 2.30
Data Feeding Methods 16/8/17 11.10 to 12.00Simple part
programming for Turning
17/8/17 10.05 to 10.55
134 M. V. Ramana
IHP(B. Tech-VIISem
MECH-A) FF-17 E-Block / Mechanical Engg. Dept.
MD(B. Tech-4Sem- FF-16
135 N. Ramesh
IHP(B. Tech-
VI -I Sem-B) FF-24E-Block /
Mechanical Engg. Dept.
136 S. K. Madhavi
CAD/CAM(B. Tech-VI Sem
'A') FF-07
E-Block / Mechanical
Difference between NC and CNC machines 26/8/17 9.15 to 10.05
Part Families 6/9/2017 11.10 to 12.00Classification &coding
system 7/9/2017 10.05 to 10.55
MICLASS coding system 9/9/2017 9.15 to 10.05
OPITZ Coding System 11/9/2017 1.40 to 2.30Cellular Manufacturing 14/9/17 9.15 to 10.55Cellular Manufacturing 16/9/17 9.15 to 10.55
Role of Process planning in CAD/CAM 18/9/17 1.40 to 2.30
Approaches to CAPP 20/9/17 11.10 to 12.00Variant CAPP
approach 21/9/17 10.05 to 10.55
Functions of material handling and storage
sys.9/10/2017 1.40 to 2.30
FMS layout configuration 10/10/2017 1.40 to 2.30
Product Life cycle,CAD Tools,
CAD systems13-06-17 1.40 to 2.30
CAD hardware,CAS Specific I/O devices 15-06-17 10.05 to 10.55
Benefits of CAD 16-06-17 9.15 to 10.55Classification of FMS 16-09-17 1.40 to 2.30
Workstation types 19-09-17 1.40 to 2.30Functions of material
handling 21-09-17 1.40 to 2.30
Storage systems 22-09-17 9.15 to 10.55FMS Layout Configuration 23-09-17 1.40 to 2.30
Components of Vapour compression
system28-02-18 9.15 To 10.40
Compressors and condensers 2/3/2018 9.15 To 10.05
Lithium Bromide system 19-04-18 1.40 To 3.20
Three Fluid system 20-04-18 9.15 to 10.05Air Refrigeration 2/5/2018 9.15 To 10.40
Simple,Bootstrap air refrigeration systems 3/5/2018 1.40 To 3.20
Regenerative and Reduced ambient
systems4/5/2018 9.15 To 10.40
Modes of Heat transfer 17-06-17 1.40 to 2.30Composite slab,
cylinders 19-06-17 10.05 to 10.55
Lumped system analysis-Heisler charts. 21-06-17 9.15 to 10.55
Fins-Geometry, configuration, types. 24-08-17 1.40 to 2.30
Convection heat transfer-External flow
over flat plate, cylinders and spheres- Boundary layer theory.
11/9/2017 1.40 to 2.30
Regimes of Boiling-types-Nusselt theory . 26-09-17 1.40 to 2.30
Radiation heat transfer-Shape factor-different
types of geometry.30-09-17 10.55 to 12.00
Radiation shields-radiation flames. 17-10-17 1.40 to 2.30
137 D. Ramajogi Naidu
CAD/CAM(B. Tech-V Sem
'B') FF-08
E-Block / Mechanical Engg. Dept.
R&AC ( I M. Tech(T.E)-
II Sem-)FF-13
Heat Transfer(B. Tech-VI Sem
'A') FF-17
136 S. K. Madhavi Mechanical Engg. Dept.
CAD/CAM(B. Tech-VI Sem
'A') FF-07
Effective Energy Management-Energy
Management Program, Organizational
Structure
24-02-18 9.15 To 10.40
Energy Auditing-Specialized Audit
Tools, Industrial Audits8/3/2018 9.15 To 10.05
Economic Analysis-General Characteristics of Capital Investments, Time Value of Money Concepts-Economic
Analysis.
18-04-18 1.40 To 3.20
Tax Considerations 22-04-18 9.15 to 10.05Project Measures of
Worth 4/5/2018 9.15 To 10.40
Solar Energy, Wind Energy 6/5/2018 1.40 To 3.20
Fuel Cells 2/5/2018 9.15 To 10.40Actual cycles and their
analysis 27.11.17 10.05 to 10.55
introduction comparison of air
standard and actual cycles
28.11.17 11.10 to 12.50
exhaustion down,loss due to gas exchange
process02.12.17 10.05 to 10.55
volumetric efficiency,loss due to
rubbing friction02.12.17 02.30 to 03.20
IC engines classification,working
principles05.12.17 11.10 to 12.50
carburetor,principle and working 16.12.17 10.05 to 10.55
combustion in CI engines 09.01.18 11.10 to 12.50
introduction to reciprocating compressor
01.03.18 09.15 to 10.05
axial flow compressors mechanical details and principle of operation
10.03.18 02.30 to 03.20
Introductions about Fluid Mechanics & Hydraulic machines
29-06-2017 9.15-10.55
Manometers & Types 7/7/2017 9.15-10.55Applications and need
for UCMP 7/12/2017 9.15-10.55
Classifications and applications of AJM 3/1/2017 11.10-12.50
Automated material handling 6/2/2018 9.15-10.55
ECM working and MRR and process
parameters18-01-18 9.15-10.55
ECG process and applications and MRR 22-1-18 11.10-12.50
EDM principals and applications and MRR 7/2/2018 11.10-12.00
140 A. Satish Kumar
FM&HM(B. Tech II Sem-1) FF-16
E-BlockME Dept.
UCMP (B. Tech IV Sem-
I1)FF-17
138 Laxmana Rao KE-Block /
Mechanical Engg. Dept.
Energy Management
(I M. Tech(T.E)-II Sem-)
FF-13
139 B V V Prasada rao
TE-I(B. Tech-III
1Sem-A) FF-16E-Block /
Mechanical Engineering
time loss factor heat loss factor 30.11.17 09.15 to 10.05
EBM working and Types and applications 15-2-18 9.15-10.55
Travelling and retort stoker 19-7-17 10.05 to 10.55
Pulverisedfuel burning system &retort stoker 24-7-17 9.15 to 10.55
1;40to2;30
Dust collectors 26-7-17 10.05 to 10.55Introduction
components of four wheeler automobile
27-07-17 11.10 to 12.50
Power transmission 28-07-17 12.00 to 12.50Rear wheel and front
wheel drive 31-07-17 9.15 to 10.05
Types of automobile engines 21-08-17 9.15 to 10.05
Turbocharging and super charging 24-08-17 11.10 to 12.50
Engine lubrication 28-08-17 9.15 to 10.05Splash and pressure lubrication system 6/12/2017 9.15 to 10.5
Oil filters and pumps 7/12/2017 11.10 to 12.00Crankcase ventilation 8/12/2017 12.00 t0 12.50
Emission from automobiles 13-12-17 9.15 to 10.5
Pollution standards 13-12-17 9.15 to 10.5National and
international pollution control techniques
13-12-17 9.15 t0 10.5
Multi point fuel injection system 15-12-17 12 to 12.50
Fuel system 16-12-17 12 to 12.50Si engine fuel supply
system 16-12-17 12 to 12.50
Mechanical fuel pump 20-12-17 9.15 to 10.05
Fuel filters 21-12-17 12 to 12.50Carburetor types 3/1/2018 9 .15 to 10.5
fuel filters 21/12/17 12 to 12.50carburetor types 3/1/2018 9.15 to 10.5
air filters 4/1/2018 11.10 to 12:05petrol injection 4/1/2018 11.10 to 12:05
CI Engines 5/1/2018 12:05 to 12:50requirements of diesel
injection 5/1/2018 12:05 to 12:50
Types of injection systems 6/1/2018 12:05 to 12:50
fuel pump 6/1/2018 12:05 to 12:50nozzle 10/1/2018 9:15 to 10:05
spray injection 10/1/2018 9:15 to 10:05injection timing 10/1/2018 9:15 to 10:05
testing of fuel pumps 11/1/2018 12:05 to 12:50cooling system 12/1/2018 11.10 to 12:05
cooling reqirements 18/01/18 11.10 to 12:05air cooling & Liquid
cooling 18/01/18 11.10 to 12:05
Thermo, water & forced circulation
system18/01/18 11.10 to 12:05
radiators 18/01/18 11.10 to 12:05types, cooling fan 19/01/18 12:05 to 12:50
water pump 19/01/18 12:05 to 12:50Thermostat 20/01/18 12:05 to 12:50
PPE(B. Tech-VII Sem
'B') FF-24Combustion needs and
draught system 25-7-17
Electrical fuel pump 20-12-17 9.15 to 10.5
evaporating cooling 20/01/18 12:05 to 12:50antifreeze solutions 25/01/18 12:05 to 12:50
ignition system 25/01/18 9:15 to 10:05function of ignition
system 25/01/18 11.10 to 12:05
Battery ignition system 27/01/18 11.10 to 12:05constructional feature
of storage battery 27/01/18 11.10 to 12:05
auto transformer 27/01/18 12:05 to 12:50contact breaking points 27/01/18 12:05 to 12:50condensor and spark
plug 27/01/18 9:15 to 10:05
magneto coil ignition system 31/01/18 9:15 to 10:05
Electronic ignition sysTEM 1/2/2018 11.10 to 12:05
CONTAC TRIGGERS 1/2/2018 11.10 to 12:05
SPARK ADVANCE 3/2/2018 9:15 to 10:05mechanisams 3/2/2018 9:15 to 10:05
electrical systems 7/2/2018 9:15 to 10:05charging circuit 8/2/2018 11.10 to 12:05
generator 8/2/2018 11.10 to 12:05current regulator 8/2/2018 11.10 to 12:05voltage regulator 14/02/18 12:05 to 12:50starting system 14/02/18 12:05 to 12:50bender drive mechanism 14/02/18 12:05 to 12:50
solenoid switch 15/02/18 12:05 to 12:50lighting systems 15/02/18 12:05 to 12:50horn,fuel gauge 15/02/18 12:05 to 12:50
oil pressure gauge 16/02/18 12:05 to 12:50engine temperature
indication 16/02/18 12:05 to 12:50
transmission system 17/02/18 12:05 to 12:50clutches priniples 17/02/18 12:05 to 12:50types ,lone clutch 17/02/18 12:05 to 12:50single plate clutch 18/02/18 12:05 to 12:50multiplate clutch 21/02/18 9:15 to 10:05
magnitic and 21/02/18 9:15 to 10:05fluid fly wheel 21/02/18 11:15 to 12:05gear box types 23/02/18 12:05 to 12:50sliding mesh 23/02/18 12:05 to 12:50
constant mesh 23/02/18 12:05 to 12:50synchro mesh 24/02/18 12:05 to 12:50
epi cyclic open drive 24/02/18 12:05 to 12:50torque converter 28/02/18 9:15 to 10:05propeller shaft 28/02/18 9:15 to 10:05
hotch kiss drive 1/3/2018 11:15 to 12:05torque tube drive 1/3/2018 11:15 to 12:05
universal joint 2/3/2018 12:05 to 12:50differential rear axis
types 2/3/2018 12:05 to 12:50
wheels and tyres 3/3/2018 12:05 to 12:50steering system 7/3/2018 9:15 to 10:05
steering geometry 7/3/2018 9:15 to 10:05camber caster 8/3/2018 11:15 to 12:05king pin rake 8/3/2018 11:15 to 12:05
combine angle toe in 9/3/2018 12:05 to 12:50centre point steering 9/3/2018 12:05 to 12:50
types of steering mechanisms 14/03/18 9:15 to 10:05
ackerman 14/03/18 9:15 to 10:05steering gears 15/03/18 11:15 to 12:05
davis steering gears 15/03/18 11:15 to 12:05types steering linkages 15/03/18 12:05 to 12:50
suspension system 16/03/18 12:05 to 12:50
141 K. Mohan LaxmiE-Block
ME Dept.
AE(B. Tech-VI Sem-
A) FF-07
objects of suspension systrem 16/03/18 12:05 to 12:50
rigid axles suspension system 16/03/18 12:05 to 12:50
torsion 16/03/18 12:05 to 12:50shock absorber 17/03/18 12:05 to 12:50independent
suspension system 17/03/18 12:05 to 12:50
baking system mechanical 17/03/18 12:05 to 12:50
breaking system 21/03/18 9:15 to 10:05hydraulic brake system 21/03/18 9:15 to 10:05
master cylinder 21/03/18 9:15 to 10:05wheel cylinder 22/03/18 9:15 to 10:05
tindem master cylinder 22/03/18 11.10 to 12:05requirements of brake
fluid 22/03/18 11.10 to 12:05
pneumatic and vaccum brakes 22/03/18 11.10 to 12:05
Geometrical constructions 12/9/2017 12.50 to 4.10
Conical sections 19-09-17 12.50 to 4.10Projections of points 26-09-17 12.50 to 4.10Projections of lines 17-10-17 12.50 to 4.10
Projections of planes 7/11/2017 12.50 to 4.10Projections of solids 17-11-17 12.50 to 4.10
Conversion of isometric to orthographic projections
23-11-17 12.50 to 4.10
Geometrical constructions 11/9/2017 9.15 to 12.50
Conical sections 18-09-17 9.15 to 12.50Projections of points 25-09-17 9.15 to 12.50Projections of lines 16-10-17 9.15 to 12.50
Projections of planes 6/11/2017 9.15 to 12.50Projections of solids 20-11-17 9.15 to 12.50
Conversion of isometric to orthographic projections
27-11-17 9.15 to 12.50
Types of patterns 11/7/2017 1.40 to 02.30Elements of gating
system 5/7/2017 1.40 to 03.20
Gas metal Arc welding, shield metal
arc welding16-08-17 1.40 to 03.20
Wire drawing and tube drawing ,applications 19-09-17 1.40 to 03.20
Cup drawing , bending embossing, coining,
applications4/10/2017 1.40 to 03.20
Injection molding, blow molding 17-10-17 1.40 to 02.30
Nucleation and grain growth 6/12/2017 11.10 to 12.00
Substitutional solid solutions, H-R Rules 15-12-17 11.10 to 12.00
Construction of iron and iron carbide phase
diagram11/1/2018 9.15 to 10.05
Phases in iron and iron carbide phase diagram 23-01-18 11.10 to 12.00
White cast iron ,structure, properties
and applications6/2/2018 11.10 to 12.00
142 D. Appa Rao
Engineering Drawing
(B. Tech-I Sem 'A')
FF-DH
E-Block / Mechanical Engineering
Engineering Drawing
(B. Tech- I-Sem-B)
FF-DH
143 Y. Hari Babu
PT(B. Tech-
III Sem 'A') FF-16
E-Block / Mechanical Engineering
EM(B. Tech- FF-17
Stainless steel, classification,
properties , applications27-02-18 11.10 to 12.00
TTT Diagram experimental analysis, construction of TTT
Diagram
14-03-18 12.00 to 1.50
Powder metallurgy introduction, steps to
prepare components in powder metallurgy
16-03-18 9.15 to 10.05
Abrasive jet machining 22-12-17 9.15 to 10.55Abrasive water jet
machining 3/1/2018 11.10 to 12.00
Abrasive flow machining 4/1/2018 9.15 to 10.55
Electrochemical Machining 24-01-18 10.05 to 12.00
Electric discharge grinding 5/2/2018 11.10 to 12.00
Plasma ark machining 21-03-18 11.10 to 12.00Types of Journal
bearings, Lubrication, 14-06-17 9.15 to 10.55
Bearing life, Thrust bearings, Pivot bearings, Collar
bearings, Split bearings
30-06-17 10.05 to 12.00
Introduction to connecting rod, Parts 14-07-17 10.05 to 12.00
Introduction to Crank shaft, Types 28-07-17 10.05 to 12.00
Introduction to engineering
mechanics, Types of forces
8/8/2017 11.10 to 12.00
Classification of friction, Laws of dry friction, Co-efficient of friction, Angle of
friction, Angle of repose, Cone of
friction, Frictional forces on wheel, Wedge friction
21-09-17 9.15 to 10.55
Introduction to operations research, History, Definition
20-11-17 10.05 to 12.00
History, Definition 21-11-17 10.05 to 10.55Phases of
implementing OR 25-11-17 12.00 to 12.50
Conduction through composite systems 14-12-17 11.10 to 12.50
Unsteady state heat conduction 5/1/2018 11.10 to 12.00
Forced convection heat transfer 18-01-18 12.00 to 12.50
Natural convection 15-02-18 11.10 to 12.50LMTD 20-02-18 9.15 to 10.55
Introduction to operations research 20-11-17 12.00 to 12.50
Operations research history and definitions 21-11-17 9.15 to 10.05
Operations research models 23-11-17 10.05 to10.55
Operations research techniques 25-11-17 9.15 to 10.05
145 Y. Sagar
DMM-II(B. Tech-VSem
'A') FF-07
E-Block / Mechanical EngineeringEM(S)
(B. Tech-I Sem-B) FF-25
OR(B. Tech-VI Sem-
B) FF-08
146 P. Karteek
HT(III-B. Tech-II-
Sem-B) FF-08E-Block /
Mechanical Engineering
OR (B. Tech-VI Sem- E-Block /
IV Sem 'B') FF-17
144 P. P. Dhanunjaya Rao
UCMP(IV-B. Tech-II-
Sem) FF-24E-Block /
Mechanical Engineering
Phases of implementing
operations research in practices
27-11-17 12.00 to 12.50
Introduction to queuing modeling 29-1-18 12.00 to 12.50
Queuing modes 30-1-18 9.15 to 10.05Introduction to
networking 6/3/2018 9.15 to 10.05
Hydraulic turbines and Classification of hydraulic turbines
14-09-17 10.05-12.00
Pelton wheel, Francis turbine and Kaplan
turbine15-09-17 1.40-3.20
Classification of pumps 6/10/2017 1.40-3.20Hooke's law, Stress-
strain diagram for mild steel
28-06-17 11.10-12.50
Types of beams 2/8/2017 11.10-12.50Components of four wheeler automobile 20-11-17 10.05-10.55
Turbo charging and super charging 21-11-17 11.10-12.50
Engine lubrication 25-11-17 12.00-12.50Carburetor and Types 12/12/2017 11.10-12.50
Battery ignition system 29-01-18 10.05-10.55Magneto coil ignition
system 30-01-18 11.10-12.50
Gear box and Types 24-2-18 12.00-12.50Steering system and
geometry 27-02-18 11.10-12.50
Types of materials and classifications 6/12/2017 1.40 to 3.20
Mechanical properties 13-12-17 1.40 to 3.20Crystal structures 23-12-17 1.40 to 3.20
Solid solution mechanisms 2/1/2018 1.40 to 3.20
Binary phase diagrams 9/1/2018 1.40 to 3.20Iron carbon diagrams 30-01-18 1.40 to 3.20
Hardness testing methods 20-02-18 1.40 to 3.20
Creep and fatigue failures 5/3/2018 1.40 to 3.20
Powder metallurgy 9/3/2018 1.40 to 3.20Irreversibility and change of entropy,
applied for Maxwell equations
31-08-17 12.00 to 12.50
P-V-T surfaces, T-S & H-S diagrams
explanation5/9/2017 1.40 to 02.30
Explanation about moiler charts and
phase transformation5/9/2017 10.05 to 10.55
Working process of Otto and diesel cycles 21-09-17 12.00 to 12.50
Working process of dual and sterling cycles 26-09-17 1.40 to 2.30
Irreversibility and change of entropy,
applied for Maxwell equations
18-08-17 9.15 to10.05
P-V-T surfaces, T-S & H-S diagrams
explanation8/9/2017 9.15 to10.05
148 M. Venkatesh
FM&HM(B. Tech-III Sem
'A') FF-16
E-Block / Mechanical Engineering
MOS(B. Tech-III Sem
'B') FF-15
AE(B. Tech-VI Sem
'B') FF-08
149 Ch. Bharath Kumar
EMMS(B. Tech-II Sem
'A') FF-16E-Block /
Mechanical Engineering
150 D. Bhanuchandra Rao
TD(B. Tech-III Sem-
A) FF-16
E-Block / Mechanical Engineering
TD(B. Tech-III Sem FF-15
147 P. Devi Prasad (B. Tech-VI Sem-A) FF-07 Mechanical
Engineering
Explanation about moiler charts and
phase transformation9/9/2017 9.15 to10.05
Working process of Otto and diesel cycles 29-09-17 9.15 to10.05
Working process of dual and sterling cycles 9/10/2017 9.15 to11.05
20-07-17 9.30 to12.5021-07-17 9.30 to12.5024-08-17 9.30 to12.5025-08-17 9.30 to12.5027-12-17 9.30 to12.50 FF-1728-12-17 9.30 to12.50 FF-246/7/2017 9.30 to12.50 FF-167/7/2017 9.30 to12.50 FF-15
10/10/2017 9.30 to12.50 FF-1611/10/2017 9.30 to12.50 FF-156/2/2018 9.30 to12.50 FF-177/2/2018 9.30 to12.50 FF-2413-07-17 9.30 to12.50 FF-1714-07-17 9.30 to12.50 FF-2414-11-17 9.30 to12.50 FF-715-11-17 9.30 to12.50 FF-82/3/2018 9.30 to12.50 FF-173/3/2018 9.30 to12.50 FF-24
Overview of Computer Operating System 28-11-17 10.05 to 10.55
Operating systems functions 29-11-17 10.05 to 10.55
Types of operating systems 1/12/2017 12.00 to 12.50
system call 5/12/2017 10.05 to 10.55Process concept-
process scheduling, operations
5/12/2017 11.10 to 12.00
Multi Thread programming models. 6/12/2017 11.10 to 12.00
Process scheduling criteria and algorithms,
and their evaluation.8/12/2017 12.00 to 12.50
System model 11/12/2017 10.05 to 10.55Deadlock
characterization. 12/12/2017 10.05 to 10.55
Deadlock prevention 15-12-17 12.00 to 12.50Detection and
avoidance 18-12-17 10.05 to 10.55
Recovery form deadlock. 21-12-17 10.05 to 10.55
Process synchronization 22-12-17 12.00 to 12.50
The critical-section problem 2/1/2018 10.05 to 10.55
Peterson’s Solution 4/1/2018 10.05 to 10.55Synchronization
Hardware 5/1/2018 12.00 to 12.50
Semaphores 8/1/2018 10.05 to 10.55Classic problems of
synchronization 9/1/2018 10.05 to 10.55
Monitors 9/1/2018 11.10 to 12.00synchronization
examples 19-1-18 12.00 to 12.50
Swapping 22-1-18 10.05 to 10.55Contiguous memory
allocation 1/2/2018 10.05 to 10.55
Paging structure of the page table 1/2/2018 11.10 to 12.00
153 Dr. J. Simhachalam (Adjunct Faculty)
UCMP Introduction to Unconventional E-Block /
Mechanical Engineering
DMM Expert Lecture on Introduction to Electro
Industries Expert Lecture on Introduction to
OS (II BTECH- II SEMESTER)
FF-11
151 Dr. Suresh Behara (Adjunct Faculty) CFD
Introduction to Fluid Dynamics FF-24
E-Block / Mechanical Engineering
Real world applications of Fluid FF-17
Expert Lecture on Introduction to
152 V.Satyanarayana (Adjunct Faculty)
TD Introduction to thermodynamics E-Block /
Mechanical Engineering
SET Expert Lecture on Introduction to Solar
FEM Expert Lecture on Introduction to Finite
'B') FF-15
segmentation 1/2/2018 12.00 to 12.50Virtual memory 3/2/2018 9.15 to 10.00demand paging 6/2/2018 10.05 to 10.55
page-Replacementalgorithms 9/2/2018 12.00 to 12.50
Allocation of Frames 10/2/2018 9.15 to 10.00Thrashing 12/2/2018 10.05 to 10.55
The concept of a file & Access Methods 17-2-12 10.05 to 10.55
Directory structure 19-2-18 10.05 to 10.55Files sharing,
protection. 20-2-12 10.05 to 10.55
File system structure 26-2-18 10.05 to 10.55file system
implementation 28-2-18 10.05 to 10.55
directory implementation 3/3/2018 9.15 to 10.00
allocation methods 5/3/2018 10.05 to 10.55
free-space management 5/3/2018 11.10 to 12.00
Overview of Mass-storage structure 6/3/2018 10.05 to 10.55
Disk structure 12/3/2018 10.05 to 10.55disk attachment 13-3-18 10.05 to 10.55disk scheduling 15-3-18 10.05 to 10.55Block Devices. 15-3-18 11.10 to 12.00
Character devices. 17-3-18 9.15 to 10.00Frame buffers 12/6/2017 10.05 to 10.55
Types of display devices 19-06-17 10.05 to 10.55
Bresenham’s Line Algorithms 18-07-17 9.15 to 10.05
NDC (Normalized device co-ordinates) 8/8/2017 9.15 to 10.05
Rotation about arbitrary point
Reflections26-08-17 10.05 to 10.55
Sutherland-Hodgeman algorithm 7/9/2017 11.10 to 12.00
Curves and surfaces 12/9/2017 9.15 to 10.0510.05 to 10.55 &
11.10 to 12.00General parallel and
perspective transformations.
19-09-17 9.15 to 10.05
Back-face algorithm 20-09-17 1.40 to 2.30Painter’s algorithm 25-09-17 10.05 to 10.55NFA with ɛ moves 1/12/2017 10.05 to 10.55 am
Conversion from NFA to DFA 6/12/2017 12.00 to 12.50 pm
Minimization of DFA 8/12/2017 12.00 to 12.50 pmConversion from Moore to Mealy
machines13-12-17 11.10 to 12.00 pm
Conversion from Finite automata to regular expressions
21-12-17 10.05 to 10.55 am
Conversion from regular expressions to Finite automata(F.A)
8/1/2018 1.40 to 2.30
Convert from F.A to R.G 9/1/2018 1.40 to 2.30
Greibach Normal form 31-01-18 1.40 to 2.30Equivalence of CFL
and PDA 8/2/2018 1.40 to 2.30
Equivalence of PDA and CFL 9/2/2018 1.40 to 2.30
FLAT(B.Tech, II-IIsem) FF-11
B-Block /Information Technology
154 Dr B V RAMANA B-Block /
Information Technology
CG(III BTECH- I SEMESTER) GF-6
Projections: Types 18-09-17
Computable functions 20-02-18 1.40 to 2.30Counter machine
,Types of TMs 23-02-18 1.40 to 2.30
NFA with ɛ moves, Significance, acceptance of
languages
5/12/2017 9.15 to 10.05 a.m
Conversion from NFA with E moves to NFA
without e-moves6/12/2017 10.05 to 10.55 am
Conversion from NFA to DFA 9/12/2017 10.05 to 10.55 am
Minimization of DFA 13-12-17 2.30 to 3.20p.mConversion from Moore to Mealy
machines16-12-17 2.30 to 3.20p.m
Conversion from Mealy to Moore
machines19-12-17 1.40 to 2.30 p.m
Conversion from Finite automata to regular expressions
2/1/2018 1.40 to 2.30 p.m
Conversion to Regular exp. To Finite
Automata3/1/2018 2.30 to 3.20p.m
20-01-18and
30-01-18Minimization of CFG 13-02-18 2.30 to 3.20p.m
Greibach Normal Form 15-02-18 2.30 to 3.20p.m
Pushdown automata(PDA) 1/3/2018 1.40 to 2.30 p.m
INterconversion(PDA to CFL and CFG to
PDA)
06-03-18 and 07-03-18 9.15 to 10.05 a.m
Types of Turing Machines 20-03-18 1.40 to 2.30 p.m
Chomsky Hierarchy languages and
recognizers21-03-18 9.15 to 10.05 a.m
Post Corespondence Problem(PCP) 24-03-18 1.40 to 2.30 p.m
First and Follow 14-07-17 9.15 to 10.05 a.mLL(1)Parser 18-07-17 1.40 to 2.30 p.mLR parsing 24-07-17 9.15 to 10.05 a.m
SLR parsing 25-07-17 1.40 to 2.30 p.mLALR parsing 26-07-17 10.05 to 10.55 a.m
Local Optimization 13-09-17 2.30 to 3.20p.mLoop Optimization 15-09-17 9.15 to 10.05 a.mData Flow analysis 22-09-17 1.40 to 2.30 p.m
Machine Dependent code opti. 4/10/2017 2.30 to 3.20p.m
Regular Expression & CFG, Derivation of
Parse Trees12/12/2017 02.30 to 03.20
Heap and Scope Rules 19-12-17 02.30 to 03.20Binding Referencing
Environment 5/1/2018 11.10 to 12.00
Expression Evaluation 7/1/2018 01.40 to 02.30Attribute Grammar
EvaluatingAttributesRecords 16-02-18 11.10 to 12.50
Pointers and Recursive Types 27-02-18 10.55 to 12.00
155 Dr. G.Nageswara Rao
FLAT(B.Tech, II-IIsem) SF-11 B-Block /
CSE
Equivalence b/w Regular Grammar to finite automata and
1.40 to 2.30 p.m
Compiler Design(III B.Tech I Sem.) GF-6
B-Block /Information Technology
PPL (II B. Tech-II
Sem) FF-11
24-01-1802.30 to 04.10
Stack Layout, Calling Sequence 1/3/2018 09.15 to 10.05
Dynamic binding 16-03-18 11.10 to 12.00V-Tables and
Polymorphysim 21-03-18 1.40 to 2.30
SAMPLING,QUQNTIZATION
SPECTRUM 2/7/2017 11.10 to 12.00HAND OVER 9/7/2017 10.05 to 11.00
CELLSPLITING 16-7-17 10.05 to 11.00WMAC 2/8/2017 10.05 to 11.00CDMA 3/8/2017 10.05 to 11.00
MIP 16-8-17 1.40 to 2.30MTCP 17-8-17 10.05 to 11.00WSN 4/9/2017 10.05 to 11.00
ROUTING PROTOCOLS IN
MANETS5/9/2017 9.15to 10.05
LIFI 24-10-17 10.05 to 11.00Keywords in C
language 14-09-17 12.00 to 12.50
Operators in C language 15-09-17 11:10 to 12.00
Control structures in C language 18-09-17 9.15 to 10.05
Introduction on loops concepts 25-09-17 11:10 to 12.00
Introduction on Arrays 7/10/2017 10.05 to 10:55Types of functions 15-10-17 12.00 to 12.50
Introduction on pointers 16-10-17 9.15 to 10.05
Storage classes in C language 23-10-17 11:10 to 12.00
File I/O functions 29-11-17 1:40 to 2:30Random access files 30-11-17 3:20 to 4:10
Fundamental Steps on DBMS 27-11-17
ER Model Relationship model 24-11-17 11:10 to 12.00
ER design diagram 27-11-17 9.15 to 10.05
Integrity constraints 16-12-17 9.15 to 10.05Views 22-12-17 11:10 to 12.00
Basic SQL Query 1/1/2018 10.05 to 10:55Joins 15-01-18 12.00 to 12.50
Normal Forms 3/2/2018 9.15 to 10.05Lock based protocols 16-02-18 11:10 to 12.00
Indexing 8/3/2018 1:40 to 2:30B+ trees 15-03-18 3:20 to 4:10
Fundamental Steps in image processing 20-11-17 12.00 to 12.50
Components of image processing system 24-11-17 11:10 to 12.00
Image Sampling 27-11-17 9.15 to 10.05Image quantization 27-11-17 1.40 to 2.30
Histogram processing 15-12-17 11:10 to 12.00Spatial filter 21-12-17 10.05 to 10:55
Smoothening filterand Sharpening filterImage compression
models 6/1/2018 2.30 to 3:20
Variable length coding 18-01-18 9.15 to 10.05LZW coding 19-01-18 11:10 to 12.00
157 B. Ramesh Naidu
CP (B. Tech-I Sem) FF-11
B-Block / Information Technology
DBMS (B. Tech-II Sem) FF-12
DIP (B. Tech-II Sem) GF-06
2/1/2018 1.40 to 2.30
156 Dr.K.YogeswaraRaoB-Block /
Information Technology
MC(IV B.TECH I
sem)
1/7/2017 10.05 to 11.00
GF-9
Thinning 8/2/2018 12.00 to 12.50Thickening 9/2/2018 9.15 to 10.05Skeletons 15-02-18 11:10 to 12.00
Region based segmentation 17-03-18 2.30 to 3:20
Region growing 20-03-18 9.15 to 10.05Region splitting and
Region mergingApplications and
networking devices 14-06-17 12.00 to 12.50
Seven layer OSI model 23-06-17 11:10 to 12.00Basic router configuration 1/7/2017 9.15 to 10.05
Shortest path routing 18-07-17 1.40 to 2.30Virtual Lans 2/8/2017 2.30 to 3:20
Inter VLAN routing 11/8/2017 9.15 to 10.05Point to point protocol 19-08-17 11:10 to 12.00
DHCP 5/9/2017 9.15 to 10.05Introduction on mobile
Adhoc networks 11/9/2017 2.30 to 3:20
Truth Tables 3/7/2017 12.00 to 12.50Rules of Inference 24-07-17 12.00 to 12.50Laws of Logical
Equivalences 10/7/2017 1.40 to 2.30
Walks, Paths , Circuits 17-08-17 1.40 to 2.30Planar Graphs, Euler’s
Formula 23-08-18 12.00 to 12.50
Graph Coloring 23-08-18 1.40 to 2.30Minimum cost
Spanning Trees : Prim’s algorithm
6/9/2017 12.00 to 12.50
Kruskal’s Algorithm 7/9/2017 1.40 to 2.30Pseudo code Conventions 24-11-17 11.10 to 12.00
Asymptotic Notations 27-11-17 11.10 to 12.00Asymptotic Notations 30-11-17 10.05 to 10.55
Merge Sort 18-12-17 11.10 to 12.00Quick Sort 2/1/2018 10.05 to 10.55
Strassen’s Matrix Multiplication 6/1/2018 11.10 to 12.00
Optimal Binary Search Tree 5/2/2018 11.10 to 12.00
N-Queens Problem 19-02-18 11.10 to 12.00Demo on Operators 6-7-17 11.10 to 12.50
Expression and evaluation 11/7/2017 9.15 to 10.05
Control structures 15-7-17 1.40 to 2.30Demo on class and
objects 22-7-17 1.40 to 2.30
Operator overloading 3/8/2017 11.10 to 12.50Demo on Inheritance 17-8-17 11.10 to 12.50
Demo on Polymorphism 7/9/2017 11.10 to 12.50
Demo on Pointers and object 14-9-17 11.10 to 12.50
9.15to 10.05
Demo on Templates 5/10/2017 11.10 to 12.501.4 To2.3
Demo on Files 12/10/2017 11.10 to 12.50
Operators 24/08/17 & 26/08/17
12:0-0 to 12:50 & 11:10 to 12:00
structure of a program 29/08/17 1:40 to 2:30Iteration 6/9/2017 9:15 to 10:05
159 Ch. RaviKishore OOP (B.Tech-II-1Sem) FF-11
B-Block / Information Technology
Demo on Virtual functions 19-9-17
Demo on Exception handling 7/10/2017
22-03-18 11:10 to 12.00
ACN GF-09
158 MrsK.Kavitha
MFCS (II B. Tech-I Sem) FF-11
B-Block / Information Technology
DAA (III B. Tech-II Sem) GF-06
Multi Dimensional arrays 19/09/17 1:40 to 2:30
library functions 4/10/2017 9:15 to 10:05storage classes 5/10/2018 1:40 to 2:30preprocessor 24/10/17 1:40 to 2:30
pointers to pointers 8/11/2017 9:15 to 10:05
arrays within structure 5/11/2017 1:40 to 2:30Difference between Structure and union 22/11/17 9:15 to 10:05
operations on files 25/11/17 11:10 to 12:00file I/O functions 29/11/17 9:15 to 10:05Random Access
Functions 2/12/2017 11:10 to 12:00
Introduction to recursion 19/01/18 9:15 to 10:55
Quick sort 16/02/18 12:00 to 12:50Merge sort 17/02/18 9:15 to 10:55
Comparison of various sorting techniques 20/02/18 1:40 to 2:30
Stack operations 1/3/2018 9:15 to 10:55Evaluation of
arithmetic expression 13/03/18 12:00 to 12:50
Conversion of expression from infix
to postfix15/03/18 10:05 to 10:55
Queue operations 16/03/18 12:00 to 12:50Double linked list 27/03/18 12:00 to 12:50Circular linked list 29/03/18 12:00 to 12:50
Binary tree 10/4/2018 12:00 to 12:50Tree traversal 13/04/18 9:15 to 10:55
Binary Search tree operations 17/04/18 9:15 to 10:05
Graph Traversal 25/04/18 10:05 to 10:55BFS 26/04/18 1:40 to 2:30DFS 26/04/18 1:40 to 2:30
11/12/17&12/12/2017
Events & Objects in Java Script 13/12/17 2:30 to 4:10
Dynamic HTML with Java 14/12/17 9:15 to:10:05&11:10 to
12:00Document Type
Definition 18/12/17 10:05 to 10:55
XML Schemas 2/1/2018 9:15 to:10:05DOM 22/01/18 12:00 to 12:50SAX 23/01/18 9:15 to:10:05
Installation of Tomcat Server 15/02/18 9:15 to:10:05
JDBC and Architecture 24/01/18 10:05 to 10:55
Steps in connection with database 5/2/2018 12:00 to 12:50
Testing Tomcat 19/02/18 12:00 to 12:50Handling Http Servlet Request and Response 28/02/18 10:05 to 10:55
Session tracking 5/3/2018 12:00 to 12:50JSP application design
with MVC 13/03/18 10:05 to 10:55
Error handling and debugging in JSP 20/03/18 9:15 to:10:05
Sharing data between JSP pages 20/03/18 9:15 to:10:05
Process Scheduling 22/06/17 10:05 to 10:55Multi Thread
programming model 1/7/2017 12:00 to 12:30
160 B.KishorKumar
Computer Programming (I-I
Civil-A)SF-13 E-BLOCK /
CIVILdynamic memory allocation 9/11/2017 12:0-0 to 12:50
Data Structures (I-II IIT) FF-12
B-BLOCK/ITWeb Technologies (III-
II IIT)
Cascading Style sheets 12:00 to 12:50 &9:15 to:10:05
GF-06
Process Synchronization 12/7/2017 09:15 to 10:05
Monitors 20/07/17 09:15 to 10:05Bankers Algorithm 27/07/17 10:05 to 10:55
Paging 31/07/17 12:00 to 12:30Segmentation 5/8/2017 01:40 to 2:30
Demand Paging 10/8/2017 10:05 to 10:55Analysis of page allocation policies 19/08/17 01:40 to 2:30
File SystemAccess Methods 23/08/17 01:40 to 2:30
Directory structure 24/08/17 10:05 to 10:55File system structure 12/9/2017 12:00 to 12:30
Directory implementation 21/09/17 10:05 to 10:55
Allocation methods 22/09/17 10:05 to 10:55Disk Scheduling 27/09/17 01:40 to 2:30Installation of
Unix/Linux Operating System
12/6/2017 12.00 to 12.50
Security by File Permissions 15-06-17 10.05 to 10.55
Networking Commands 20-06-17 11.10 to 12.00
Shell Programming environment 26-07-17 9.15 to 10.05
Illustration of Zombie & Orphan Process 11/9/2017 10.05 to 10.55
Signal Handling functions 18-09-17 10.05 to 10.55
Implementation of IPC part-A 25-10-17 1.40 to 2.30
Implementation of IPC part-B 26-10-17 1.40 to 2.30
Implementation of IPC part-C 27-10-17 1.40 to 2.30
Layers in OSI Model 5/12/2017 1.40 to 2.30Error Detecting Codes 20-12-17 9.15 to 10.05Elementary Data Link
Protocols 22-12-17 12.00 to 12.50
MAC Sub Layer 27-12-17 9.15 to 10.05Services provided to the Transport Layer 6/1/2018 12.00 to 12.50
Routing Algorithms 19-01-18 12.00 to 12.50IPV4 vs IPv6 14-02-18 9.15 to 10.05
Computer Types 2/12/2017 02.30 to 03.20Bus Structures 4/12/2017 9.15 to 10.05
Computer Arithmetic 16-12-17 02.30 to 03.20Register Transfer and
Micro operations 2/1/2018 11.10 to 12.00
01.40 to3.2
01.40 to3.2
Memory Organization 5/2/2018 9.15 to 10.05Cache Memory 12/2/2018 9.15 to 10.05Virtual Memory 17-02-18 02.30 to 03.20
Modes of Transfer 27-02-18 11.10 to 12.00Parallel Processing 6/3/2018 11.10 to 12.00
Multiprocessing 12/3/2018 9.15 to 10.05SDLC 9/12/2017 10.05 to 11.00SDLC 12/12/2017 11.10 to 12.00
Process model 2/1/2018 10.05 to 11.00Pragmatic s/w cost
estimation 18-01-18 10.05 to 11.00
sloc 4/1/2018 10.05 to 11.00REUSE,LANGUAGE 24-01-18 10.05 to 11.00
161 Ch. Chandra Sekhar
Unix Programming (IV B. Tech-I Sem-IT)
GF-09
B-Block / Information TechnologyComputer
Networks (IIIB. Tech-II Sem-IT)
SF-12
Computer Organization and Architecture (II B.
Tech-II Sem-IT)
FF-11
Arithmetic Logic Shift Unit 10/1/2018
Addressing Modes 31-01-18
SPM (4THB. Tech-II Sem) GF-09
III-I IT Operating systems GF-06
AUTOMATION 8/3/2018 1.40 to 2.30MILESTONES 6/2/2018 10.05 to 11.00
SCO 9/3/2018 10.05 to 11.00MTBF 20-03-18 9.15to 10.05
METRICS AUTOMATION 27-03-18 10.05 to 11.00
USE CASE MODELING 7/12/2017 11.10 to 12.00
OBJECTS AND CLASSES 19-12-17 11.10 to 12.00
INHERETENCE 28-03-18 1.40 to 2.30POLYMORPHISM 29-03-18 1.40 to 2.30
SEQUENCE DIAGRAMS 2/2/2018 10.05 to 11.00
ACTIVITY DIAGRAMS 5/2/2018 1.40 to 2.30
DESIGN A CLASS 11/4/2018 1.40 to 2.30INTERFACE 12/4/2018 11.10 to 12.00
COMPONENTS 12/4/2018 1.40 to 2.30
TIMING DIAGRAMS 18-04-18 1.40 to 2.30
STATE MACHINE 18-04-18 1.40 to 2.30DEPLOYMENT 19-04-18 11.10 to 12.00
CLOUD COMPUTING 1/7/2017 9.15to 10.05
ITSM 2/7/2017 9.15to 10.05I-TIERII-TIERIII-TIER
USECASE 16-7-17 9.15to 10.05E-WASTE 2/8/2017 9.15to 10.05
OAMP 3/8/2017 9.15to 10.05OSI VS TCP/IP 16-8-17 9.15to 10.05
STORAGE 17-8-17 9.15to 10.05FILE SYSTEM 4/9/2017 9.15to 10.05
STORAGE AREA NETWORKS 5/9/2017 9.15to 10.05
SAMPLING,QUQNTIZATION
SPECTRUM 2/7/2017 11.10 to 12.00HAND OVER 9/7/2017 10.05 to 11.00
CELLSPLITING 16-7-17 10.05 to 11.00WMAC 2/8/2017 10.05 to 11.00CDMA 3/8/2017 10.05 to 11.00
MIP 16-8-17 1.40 to 2.30MTCP 17-8-17 10.05 to 11.00WSN 4/9/2017 10.05 to 11.00
ROUTING PROTOCOLS IN
MANETS5/9/2017 9.15to 10.05
LIFI 24-10-17 10.05 to 11.00Types of Data-attributes and measurements
11/12/2017 9.15 to 10.05
Data Preprocessing 15-12-17 10.05 to 10.55similarity and
dissimilarity between simple
attributes&dissimilarities between data objects
16-12-17 11.10 to 12.00
Data Warehouse Implementation 2/1/2018 2.30 to 3.20
Data Generalization and Summarization 9/1/2018 2.30 to 3.20
Mining Class Comparisons 22-01-18 10.05 to 10.55
The apriori principle 2/2/2018 9.15 to 10.05DWDM (III BTECH- II GF-6
162 J.Udaykumar
Tech-II Sem)
B-Block / Information Technology
OOAD(3(2)B.TECH) GF-6
ITSM(2(1)B.TECH) GF-6
9/7/2017 9.15to 10.05
MC(4(1)B.TECH)
1/7/2017 10.05 to 11.00
GF-9
frequent item set generation in the Apriori algorithm
3/2/2018 11.10 to 12.00
Rule generation compact representation
of frequent item sets19-02-18 9.15 to 10.05
Rule-Based Classification 19-02-18 9.15 to 10.05
Accuracy and Error Measures 26-02-18 10.05 to 10.55
k-means as an optimization problem. 13-03-18 2.30 to 3.20
Agglomerative hierarchical clustering 16-03-18 10.05 to 10.55
DBSCAN 17-03-18 11.10 to 12.0012-12-17 & 10.05 to10.55
13-12-17 &9.15 to 10.05
13-12-17 & 10.05 to10.55 14-12-17 &
11.10 to12.00Decision Tree Representation 2/1/2018 9.15 to 10.05
Hypothesis space search in decision tree
learning3/1/2018 10.05 to 10.55
issues in decision tree learning 9/1/2018 10.05 to 10.55
23-01-18 10.05 to 10.55& &
24-01-18 9.15 to 10.05
9.15 to 10.05 &10.05 to 10.55
Probability learning an approximately correct
hypothesis14-02-18 10.05 to 10.55
6/3/2018 10.05 to 10.55& &
7/3/2018 9.15 to 10.059.15 to 10.05 &10.05 to 10.55
9.15 to 10.05 &10.05 to10.55
9.15 to 10.05 &10.05 to10.55
Forgetting the Line between Cognizable and Non- Cognizable
Officers
27-06-17 1.40 to 2.30
Hacking 18-07-17 2.30 to 3.20Teenage Web Vandals 21-07-17 1.40 to 2.30
Source versus residence 11/8/2017 2.30 to 3.20
Taxation policies in India 22-08-17 1.40 to 2.30
Digital Signatures 8/9/2017 1.40 to 2.30E-Governance in the
India 15-09-17 1.40 to 2.30
Are Cyber Consumers Covered under the
Consumer Protection22-09-17 1.40 to 2.30
Goods and Services 26-09-17 1.40 to 2.30Phases of Compilation 14-06-17 1.40 to 2.30
Lexical Analysis 15-06-17 2.30 to 3.20
163 CH SRINIVASARAO
BTECH- II SEMESTER)
GF-6
B/Information Technology
ML (IV BTECH- II SEMESTER)
General-to-specific ordering of hypotheses
GF-9
Version spaces and the candidate elimination
algorithm
Maximum likelihood and least squared error
hypothesis
Maximum likelihood hypothesis for
predicting probabilities30-01-18
Constructing explicit generalizations versus
comparing to past Sequential Covering
Algorithms 14-03-18
Learning First Order Rules 20-03-18
Learning Sets of First Order Rules 21-03-18
CL (IV BTECH- I SEMESTER) GF-9
Context free grammars 29-06-17 1.40 to 2.30Top downparsing,
Backtracking 10/7/2017 9.15 to 10.05
LL (1), recursive descent parsing 13-07-17 1.40 to 2.30
Predictive parsing 17-07-17 9.15 to 10.05Intermediate forms of
source Programs 8/8/2017 9.15 to 10.05
Abstract syntax tree 9/8/2017 1.40 to 2.30polish notation 10/8/2017 10.05 to 10.55
three address codes 17-08-17 1.40 to 2.30Attributed grammars 18-08-17 9.15 to 10.05
Syntax directed translation 18-08-17 10.05 to 10.55
Conversion of popular Programming
languages21-08-17 9.15 to 10.05
language Constructs into Intermediate code
forms21-08-17 10.05 to 10.55
do 23-08-17 9.15 to 10.05Type checker 24-08-17 12.00 to 12.50
Consideration for Optimization 4/9/2017 9.15 to 10.05
Scope of Optimization 7/9/2017 1.40 to 2.30DAG representation 16-09-17 9.15 to 10.05Object code forms 21-09-17 1.40 to 2.30
Machine dependent code optimization 25-09-17 9.15 to 10.05
Register allocation 4/10/2017 9.15 to 10.05Demo on Operators 10/7/2017 11.10 to 12.00Control structures 17-7-17 11.10 to 12.00
Lists 21-7-17 11.10 to 12.00Dictionaries 26-7-17 12 to 12.50Python Sets 29-7-17 11.10 to 12.50
File I/O 18-8-17 12 to 12.50PERL Operators 15-9-17 11.10 to 12.50
Subroutines 25-9-17 12 to 12.50PERL File I/O 5/10/2017 11.10 to 12.50
Demo on Operators 6/12/2017 09.15 to 10.05Control structures 12/12/2017 09.15 to 10.05
Lists 20-12-17 09.15 to 10.05Dictionaries 10/1/2018 09.15 to 10.05Functions 6/2/2018 09.15 to 10.05File I/O 20-2-18 09.15 to 10.05
Exceptions 28-2-18 09.15 to 10.05Inheritance 13-3-18 09.15 to 10.05
Block Cipher 24-6-17 10.05 to 10.55 DES, Triple DES 14-7-17 11.10 to 12.00 AES Algorithm 24-7-17 10.05 to 10.55 Key Distribution 1/8/2017 10.05 to 10.55
Public Key Cryptography 7/8/2017 10.05 to 10.55
RSA 8/8/2017 10.05 to 10.55 HMAC algorithm 26-8-17 11.10 to 12.50
12To
12.5IP security 16-9-17 10.05 to 10.55
Key Management 19-9-17 11.10 to 12.50Secure Electronic
Transaction 3/10/2017 11.10 to 12.50
Firewalls 9/10/2017 10.05 to 10.55 Demo on class and
objects 6-7-17 10.05 to 10.55
Demo on Inheritance 11/7/2017 10.05 to 10.55
164 G Jagadeeswara Rao
FOSS (B.Tech-II-1Sem) FF-11
B-Block / Information Technology
Introduction to Python (B.Tech-
II-IISem)FF-11
NS&C (B.Tech-IV-1 Sem) GF-09
X.509 Authentication Service 29-8-17
CD (III BTECH- I SEMESTER) GF-6
Demo on Polymorphism 15-7-17 10.05 to 10.55
Demo on Pointers and object 22-7-17 10.05 to 10.55
Demo on Virtual functions 3/8/2017 10.05 to 10.55
Demo on Templates 17-8-17 10.05 to 10.55Demo on Exception
handling 7/9/2017 10.05 to 10.55
Overview of Computer Operating System 28-11-17 10.05 to 10.55
Operating systems functions 29-11-17 10.05 to 10.55
Types of operating systems 1/12/2017 12.00 to 12.50
system call 5/12/2017 10.05 to 10.55Process concept-
process scheduling, operations
5/12/2017 11.10 to 12.00
Multi Thread programming models. 6/12/2017 11.10 to 12.00
Process scheduling criteria and algorithms,
and their evaluation.8/12/2017 12.00 to 12.50
System model 11/12/2017 10.05 to 10.55Deadlock
characterization. 12/12/2017 10.05 to 10.55
Deadlock prevention 15-12-17 12.00 to 12.50Detection and
avoidance 18-12-17 10.05 to 10.55
Recovery form deadlock. 21-12-17 10.05 to 10.55
Process synchronization 22-12-17 12.00 to 12.50
The critical-section problem 2/1/2018 10.05 to 10.55
Peterson’s Solution 4/1/2018 10.05 to 10.55Synchronization
Hardware 5/1/2018 12.00 to 12.50
Semaphores 8/1/2018 10.05 to 10.55Classic problems of
synchronization 9/1/2018 10.05 to 10.55
Monitors 9/1/2018 11.10 to 12.00synchronization
examples 19-1-18 12.00 to 12.50
Swapping 22-1-18 10.05 to 10.55Contiguous memory
allocation 1/2/2018 10.05 to 10.55
Paging structure of the page table 1/2/2018 11.10 to 12.00
segmentation 1/2/2018 12.00 to 12.50Virtual memory 3/2/2018 9.15 to 10.00demand paging 6/2/2018 10.05 to 10.55
page-Replacementalgorithms 9/2/2018 12.00 to 12.50
Allocation of Frames 10/2/2018 9.15 to 10.00Thrashing 12/2/2018 10.05 to 10.55
The concept of a file & Access Methods 17-2-12 10.05 to 10.55
Directory structure 19-2-18 10.05 to 10.55Files sharing,
protection. 20-2-12 10.05 to 10.55
File system structure 26-2-18 10.05 to 10.55file system
implementation 28-2-18 10.05 to 10.55
165 Sri. Y. Narsimha Murthy OOPS (II BTECH – I SEM) FF-11 B/Information
Technology
166 Sri R.ChandraMohan OS (III BTECH- II SEMESTER) FF-11 B/Information
Technology
directory implementation 3/3/2018 9.15 to 10.00
allocation methods 5/3/2018 10.05 to 10.55
free-space management 5/3/2018 11.10 to 12.00
Overview of Mass-storage structure 6/3/2018 10.05 to 10.55
Disk structure 12/3/2018 10.05 to 10.55disk attachment 13-3-18 10.05 to 10.55disk scheduling 15-3-18 10.05 to 10.55Block Devices. 15-3-18 11.10 to 12.00
Character devices. 17-3-18 9.15 to 10.00III BTECH & IV BTECH (Cloud
computing)Cloud computing 17-06-2017 9.15 to 12.50
IT ( 3rd & 4thYear) Cloud computing 16-09-2017 9.15 to 12.50
IT (2nd, 3rd & 4thYear) Open Stack 16-12-2017 9.15 to 12.50
IT (2nd, 3rd & 4thYear) Open Stack 27/01/2018 9.15 to 12.50
IT (2nd, 3rd & 4thYear)
Block Chain Technology 17-02-2018 9.15 to 12.50
IT (2nd, 3rd & 4thYear)
Software Engineering practices – An Agile
Model28-08-2017 9.15 to 12.50
IT (3rd & 4thYear)
Software Engineering practices – An Agile
Model23-09-2017 9.15 to 12.50
IT (2nd, 3rd & 4thYear)
Software Engineering practices – An Agile
Model9/12/2017 9.15 to 12.50
Different approaches of teaching
methodologies 14.06.2017 3.20 to 4.10pm
Pedagogical principles followed to influence
students16.08.2017 11.10 to 12.00
Outcome based education system 24-11-17 10.05 to 10.55
14.30 to15.2
Soil structure 09.15 to 10.05Clay Mineralogy 16.06.2017 14.30 to 15.20Mass-Volume
relationship 19.06.2017 10.05 to 10.55
Index Properties of soil ,Grain size analysis 28.06.2017 15.20 to 16.10
Permeability-Factors affecting. 24.07.2017 09.15 to 10.55
Laboratory Determination of
permeability.09.15 to 10.05
Constant Head Method. 15.20 to 16.10
Variable MethodSeepage through soils 16.08.2017 15.20 to 16.10
169 Prof.V.V .Nageswara Rao Pedagogy SF-17E-Block /
Department of Civil Engineering
Different learning strategies in teaching 2/2/2018
GTE-1-III-I SF-17
26.07.2017
167 Mr. Dhanunjaya Naidu Ravada FF-11 B/Information
Technology
IT (2nd, 3rd & 4thYear) WebServices 25-07-2017 9.15 to 12.50
IT (2nd, 3rd & 4thYear) Open Stack 19-08-2017 9.15 to 12.50
IT (2nd, 3rd & 4thYear) IOT 24-03-2018 9.15 to 12.50
168 Mr. VivekVardhan Varanasi
IT (3rd & 4thYear)
Software Engineering practices 24-06-2017 9.15 to 12.50
FF-11 B/Information Technology
IT (3rd & 4thYear) Software Testing 15-07-2017 9.15 to 12.50
Boussinesq theory- areas of different
shapes28.08.2017 10.05 to 10.55
Wester Gaard Theory – areas of different
shapes06.09.2017 09.15 to 10.05
Effect of compaction on soil propertiesField compaction
equipmentStress History of clays,e-p curvee-log p curves
29.09.2017 13.40 to 14.3003.10.2017 09.15 to 10.05
Types of welds-Butt and fillet welds. 29-11-17 11.10 to 12.50
Introductions to Different types of
connections.8/12/2017 13.40 to 15.20
Effective length of columns , slenderness
ratio permissible stresses
2/2/2018 13.40 to 15.20
splicing of columns 19-02-18 09.15 to 10.55Design considerations
and IS code recommendations.
9/3/2018 13.40 to 15.20
Concepts of limit state design, basic static
principles10/7/2017 3
Introduction to shear, torsion 23/08/2017 01:40 to 3:20 PM
Introduction to design of columns 4/9/2017 11:10 to 12:50
Introduction to slabs 25/09/2017 11:10 to 12:50Air Pollution
Definitions, Scope, 13-06-17 11.00 to 12.50
Significance and Episodes 15-06-17 11.00 to 12.50
Air Pollutants – Measurement of
Pollution27-06-17 11.00 to 12.50
Classifications 30-06-17 11.00 to 12.50Natural and Artificial
–Primary and Secondary
11/7/2018 11.00 to 12.50
Effects of Air pollutants on man,
material14-07-18 11.00 to 12.50
Global effects of air pollution 14-07-17 11.00 to 12.50
Green House effect, Heat Islands, 25-07-17 11.00 to 12.50
Acid Rains, and Ozone Holes 25-07-17 11.00 to 12.50
Control of particulates – Control at Sources, 11/8/2017 11.00 to 12.50
Process Changes, Equipment
modifications18-08-17 11.00 to 12.50
Equipment’s – Settling Chambers, 22-08-17 11.00 to 12.50
171 Dr.C.H. Khannam Naidu D&DCS-I (B.Tech, III-I ‘A’) SF-17
E-Block / Department of
Civil Engineering
172 Dr.V.B Neela
AIR QUALITY MANAGEMENT (IVB. Tech-I Sem
Sec- A)
SF-19E-Block /
Department of Civil Engineering
Centrifugal separators, Reverse Flow Cyclones 29-08-17 11.00 to 12.50
170 Dr.G.T.Naidu
section A SF-17
E-Block / Department of
Civil Engineering13.09.2017 09.15 to 10.05
16.09.2017 11.05 to 12.50
Types of Laboratory strength tests
DSS-III-II section A
Advantages and disadvantages of 24-11-17 13.40 to 15.20
SF-18
General Methods of Control of NO2 and
SO2 emission15-09-17 11.00 to 12.50
In-plant Control Measures, 19-09-17 11.00 to 12.50
process changes 19-09-17 11.00 to 12.50General Methods of Control of NO2 and
SO2 emission22-09-17 11.00 to 12.50
In-plant Control Measures, 22-09-17 11.00 to 12.50
process changes 22-09-17 11.00 to 12.50Ambient Air Quality
Management 26-09-17 11.00 to 12.50
Micro meteorological monitoring Emission
Standards.3/10/2017 11.00 to 12.50
Basic components of Remote Sensing and
GIG27-06-17 10.05 to 10.55
Different satellite launched programes 25-07-17 10.05 to 10.55
Digital Image processing 8/8/2017 10.05 to 10.55
Introduction to GIS 26-08-17 1.40 to 2.30Raster data models 4/9/2017 11.10 to 12.50Vector data models 16-09-17 1.40 to 2.30
Applications inLULC, Agriculture,
forestoryusing RS&GIS
26-09-17 11.10 to 12.50
09:15 to 10:05AM
01:40 to 2:30PM
09:15 to 10:55AM
09:15 to 10:55AM
09:15 to 10:05AM
Principles of Industrial waste treatment 20-11-17 3.20 to 4.10
sources of pollution physical chemical,
organic21-11-17 11.10 TO 12.50
Introduction to hazardous waste 11/12/2017 3.20 to 4.10
Basic Theories of Industrial Waste water
Management14-12-17 11.10 TO 12.50
Volume reduction 18-12-17 3.20 to 4.10Strength reduction 2/1/2018 3.20 to 4.10Equalization and
proportioning 2/1/2018 1.40 to 2.30
Industrial waste water discharges into streams 9/1/2018 11.10 TO 12.50
Use of Municipal Waste Water in
Industries23-01-18 3.20 to 4.10
Paper and Pulp industries 30-01-18 1.40 to 2.30
Steel Plants 22-02-18 11.10 TO 12.50Tanneries 6/2/2018 3.20 to 4.10Fertilizers 15-02-18 1.40 to 2.30
175 Dr. H. Rama Mohan
Industrial waste water
management (IIIB. Tech-II
Sem Sec-A& B)
SF-20 E-Block/ Civil Engineering
174 Sri S.Ramlal
SA-II (B. Tech III-I (B))
Determine the normal thrust,radial shear and 14-06-2017
SF-17 E-Block/ Civil Engineering
Moment distribution method with one 24-07-2017
Stiffness method with one example 16-09-2017
DCS-II (B. Tech III-II (A))
Concept of concrete structures 20-11-2017
SF-18 E-Block/ Civil Engineering
Design of solid slab bridges 6/1/2018
Design of different types of water tanks. 5/3/2018 09:15 to 10:55 AM
173 Dr.Ch.Vasudeva Rao
Remote Sensing and GIS
application (IVB. Tech-I Sem Sec-
A)
SF-22E-Block /
Department of Civil Engineering
Oil Refineries 20-02-18 11.10 TO 12.50Common Effluent
Treatment Plants(CETP) sewage
5/3/2018 1.40 to 2.30
Static and kinematic indeterminacy of different elements
28-11-17 10.05 to 11.00
Explanation of method sections and Method
joints5/12/2017 10.05 to 11.00
Explaining cantilever trusses 16-12-2017 9.15 to 10.05
Explanation of propped cantilever
beam23-12-2017 9.15 to 10.05
Showing shear force and bending mement diagrams of the fixed
beam
10/1/2018 10.05 to 11.00
Showing shear force and bending moment
diagrams of the continuous beam beam
5/1/2018 10.05 to 11.00
Showing the strain energy due to load ,shear and bending
moment
13.03-2018 10.05 to 11.00
Georeferencing of a Toposheet and Project
Raster12/7/2017 1:40 to 4:10 pm
Digitization of a features from toposheet 26-07-2017 1:40 to 4:10 pm
Procedure of Topology 9/8/2017 1:40 to 4:10 pmEstimation of features 23-08-2017 1:40 to 4:10 pmCreation of Thematic
& Lay out Map 6/9/2017 1:40 to 4:10 pm
DEM Generation and Surface Volume
Calculation13-09-2017 1:40 to 4:10 pm
Road Network & Water Resource
Engineering Applications in GIS
20-09-2017 1:40 to 4:10 pm
Introduction& applications of various
principles23-01-2018 09:15 to 11:00
In engineering. (1,2) AM19-03-2018 09:15 to 11:00
(1,2) AM2/4/2018 09:15 to 11:00
(1,2) AMIntroduction&
applications of various principles
10/1/2018
In engineering. (2,3)14-02-2018 09:15 to 11:00
(1,2) AM14-03-2018
(2,3)Georeferencing and
Project Raster 13-07-2017 10:05 AM to 12:50 PM
Digitization of a features from toposheet 20-07-2017 10:05 AM to 12:50 PM
Procedure of Topology 10/8/2017 10:05 AM to 12:50 PMEstimation of features 17-08-2017 10:05 AM to 12:50 PM
176 Sri G.GowriSankara Rao SA-1 II-2 SectionA SF-07 E-Block/ Civil
Engineering
177 Dr.B.V Reddy GIS Lab (B. Tech IV-I (A)) GF-07 E-Block/ Civil
Engineering
178 Sri Ch.ChnadraMouli
EM (B. Tech I-II (A)) SF-10 E-Block/ Civil
EngineeringFree body diagram, reaction and tension Concepts of C.G & M.I Calculations of
EM (B. Tech I-II (B))
10:05 to 11:50 AM
SF-15 E-Block/ Civil EngineeringFree body diagram,
reaction and tension Free body diagram,
reaction and tension 10:05 to 11:50 AM
Creation of Thematic & Lay out Map 7/9/2017 10:05 AM to 12:50 PM
DEM Generation and Surface Volume
Calculation14-09-2017 10:05 AM to 12:50 PM
Road Network & Water Resource
Engineering Applications in GIS
27-09-2017 1:40 to 4:10 pm
INTRODUCTION TO FOOTING 20-11-17 1.40 to 2.30
Types of footings 21-11-17 2.30 to 3.20Distribution of base
pressures 22-11-17 1.40 to 2.30
General design consideration of 27-11-17 1.40 to 2.30
Design of isolated footings 28-11-17 1.40 to 2.30
problems 29-11-17 1.40 to 2.30Combined footing with
slabs 6/12/2017 1.40 to 2.30
UNIT 2 Introduction slabs 13-12-17 1.40 to 2.30
Circular slab design considerations 18-12-17 1.40 to 2.30
Fixed support considerations 20-12-17 1.40 to 2.30
Flat slabs 6/1/2018 1.40 to 2.30problems 2/1/2018 1.40 to 2.30problems 3/1/2018 1.40 to 2.30UNIT-3
Interduction to bridge 8/1/2018 1.40 to 2.30Components of bridge
in sub strucure 9/1/2018 1.40 to 2.30
Classification of bridge 15-01-18 1.40 to 2.30Loading force acting
on bridges 16-01-18 1.40 to 2.30
Highway loading standards 17-01-18 1.40 to 2.30
Design of solids slabs for irc loading 23-01-18 1.40 to 2.30
UNIT 4Piles,piles caps 24-01-18 1.40 to 2.30
Design of board cast in city piles 29-01-18 1.40 to 2.30
Beam of friction piles 31-01-18 1.40 to 2.30Pile design 5/2/2018 1.40 to 2.30Problems 6/2/2018 1.40 to 2.30
Design of pile cap and four using bending
method7/2/2018 1.40 to 2.30
UNIT -5Water tank working
stress method 12/2/2018 1.40 to 2.30
Introduction 13-02-18 1.40 to 2.30Impermeability
requirements 14-02-18 1.40 to 2.30
Design of rectangle ,circular water tanks
on ground15-02-18 1.40 to 2.30
09:15 to 10:05AM
01:40 to 2:30PM
179 B. Jyothsna GIS Lab (B. Tech IV-I (B)) GF-07 E-Block/ Civil
Engineering
180 Sri J.Sekhar Raju DCS-II-III-II SEC-B SF-12 E-Block/ Civil
Engineering
181 Mr.G.Narasimha Murthy SA-II-III-1 SecA
Determine the normal thrust, radial shear and 14-06-2017
SF-17 E-Block/ Civil EngineeringMoment distribution
method 12/7/2017
Historic development, general principles of pre tensioning &post
tensioning of pre stressed concrete
20/11/17 3.20 to 4.10
Limitations of pre stressed concrete 21/11/17 1.40 to 2.30
High strength concrete, methods of pre
stressing 27//11/17 3.20 to 3.20 to 4.104.10
Process of pre tensioning and post
tensioning28/11/17 1.40 to 2.30
Losses due to elastic shortening 8/1/2018 3.20 to 4.10
Introduction of composite sections 21/1/18 1.40 to 2.30
Introduction shear and principal stresses 22/2/18 11.10 to 12.50
Composite sections 27/2/18 1.40 to 2.30Propped and un
propped conditions 1/3/2018 11.10 to 12.50
Factors influencing long term deflections 15/3/18 11.10 to 12.50
Rocks and stones classification and
characteristics7/9/2017 11.00 to 11.50
Bricks 8/9/17 9.15 to 10.05Ceramics 12/9/2017 3.20 to 4.10
Tiles manufacturing 14/9/17 11.00 to 11.50
Types of glass 15/9/17 9.15 to 10.05Lime 19/9/17 3.20 to 4.10
Cement manufacturing
processes18/9/17 2.30 to 3.20
Pozzolonas 20/9/17 2.30 to 3.20Timber –seasoning
,diseases and defects of timber
21/9/17 11.00 to 11.50
Mortar -types manufacturing process 22/9/17 9.15 to 10.05
Concrete-properties ,fresh and harden
concrete23/9/17 2.30 to 3.20
Glass-different types of manufacturing process of glass
26/9/17 3.20 to 4.10
Metals and Alloys –properties 5/10/2017 11.00 to 11.50
Ferrous metals and non ferrous metals 6/10/2017 9.15 to 10.05
Plastics- classification 7/10/2017 2.30 to 3.20Foundations 9/10/2017 2.30 to 3.20
types of foundations 10/10/2017 3.20 to 4.10Brick masonry- types
of bonds 16/10/17 2.30 to 3.20
Stone masonry- types 17/10/17 3.20 to 4.10Partition walls 20/10/17 9.15 to 10.05
Damp proofing materials ,uses 23/10/17 2.30 to 3.20
Doors 27/10/17 9.15 to 10.05Windows 28/10/17 2.30 to 3.20
lintels 2/11/2017 11.00 to 11.50Stairs 3/11/2017 9.15 to 10.05
Types of stairs 4/11/2017 2.30 to 3.20
182 MrsV.Divyasri
Pre stressed concrete SF-17
E-Block/ Civil Engineering
I-I BMC- A section SF-10
Uses of stairs and components of stairs 9/11/2017 11.00 to 11.50
Floors 11/11/2017 2.30 to 3.20Roofs 13/11/17 2.30 to 3.20
Hollow blocks 14/11/17 3.20 to 4.10Ferro cement 16/11/17 11.00 to 11.50
pointing 17/11/17 9.15 to 10.05Plastering 20/11/17 2.30 to 3.20
Paints 21/11/17 3.20 to 4.10Varnishes 23/11/17 11.00 to 11.50
External finishes 24/11/17 9.15 to 10.05Scaffolding, underpinning, 25/11/17 2.30 to 3.20
Form work 1/12/2017 9.15 to 10.05Rocks and stones classification and
characteristics6/9/2017 1.40 to 2.30
Bricks 8/9/2017 12.50 to 1.40Ceramics 12/9/2017 12.50 to 1.40
Tiles manufacturing 13/9/17 1.40 to 2.30
Types of glass 14/9/17 9.15 to 10.05Lime 15/9/17 12.50 to 1.40
Timber –seasoning ,diseases and defects
of timber18/9/17 9.15 to 10.05
Mortar -types manufacturing process 19/9/17 12.50 to 1.40
Glass-different types of manufacturing process of glass
21/9/17 9.15 to 10.05
Metals and Alloys –properties 22/9/17 12.50 to 1.40
Ferrous metals and non ferrous metals 23/9/17 11.00 to 11.50
Plastics- classification 25/9/17 9.15 to 10.05Foundations 5/10/2017 9.15 to 10.05
types of foundations 6/10/2017 12.50 to 1.40Brick masonry- types
of bonds 7/10/2017 11.00 to 11.50
Stone masonry- types 11/10/2017 1.40 to 2.30Partition walls 17/10/17 12.50 to 1.40
Damp proofing materials ,uses 20/10/17 12.50 to 1.40
Doors 26/10/17 9.15 to 10.05Windows 1/11/2017 1.40 to 2.30
lintels 2/11/2017 9.15 to 10.05Stairs 3/11/2017 12.50 to 1.40Floors 7/11/2017 9.15 to 10.05Roofs 9/11/2017 9.15 to 10.05
Hollow blocks 15/11/17 1.40 to 2.30Ferro cement 16/11/17 9.15 to 10.05
pointing 17/11/17 12.50 to 1.40Plastering 21/11/17 9.15 to 10.05
Paints 24/11/17 12.50 to 1.40Varnishes 25/11/17 11.00 to 11.50
Scaffolding, underpinning, 29/11/17 1.40 to 2.30
Form work 29/11/17 1.40 to 2.30Elevated water tank 16-02-18 1.40 to 2.30
Rough cost estimation 19-06-17 2.30 to 3.20Difference between
rough and detail estimation
21-06-17 9.15 to 10.05
Examples of rough estimation 23-06-17 9.15 to 10.55
I-I BMC- B section SF-11
Rate analysis and description of rates of
different works4/8/2017 9.15 to 10.55
Bar bending schedules 6/9/2017 9.15 to 10.05Bar bending schedules 13-09-17 9.15 to 10.55
Contracts and different types of contracts 4/10/2017 9.15 to 10.05
Contract administration and
conditions5/10/2017 1.40 to 2.30
Valuation and its types 6/10/2017 9.15 to 10.55Types of out goings 9/10/2017 2.30 to 3.20Water born diseases 5/7/2017 12.00 to 12.50Population Fore cast 6/7/2017 12.00 to 12.50
Fire demand and storage capacity of
water18-07-17 1.40 to 2.30
Raw water and quality analysis 20-07-17 12.00 to 12.50
Quality analysis 21-07-17 1.40 to 2.30Tests on quality 26-07-17 12.00 to 12.50Tests on quality 27-07-17 12.00 to 12.50
Distribution system 4/8/2017 12.00 to 12.50Joints, valves 8/8/2017 1.40 to 2.30
Water treatment units 12/9/2017 1.40 to 2.30Feeding arrangements 19-09-17 1.40 to 2.30
Filtration theory 26-09-17 1.40 to 2.30Disinfection methods 4/10/2017 1.40 to 2.30Chlorination and its
uses 5/10/2017 12.00 to 12.50
Chlorination 6/10/2017 1.40 to 2.30Solid waste management 9/10/2017 1.40 to 2.30
Collecting and Transportation 11/10/2017 1.40 to 2.30
Characteristics of solid waste 13-10-17 1.40 to 2.30
Disposing methods 17-10-17 1.40 to 2.30Introduction to
geotechnical lab, index properties
19-06-2017 10:05 to 12:50
Introduction to engineering properties 4/9/2017 10:05 to 12:50
methods of de-watering- sumps and
interceptor ditches20-06-17 9.15 to 10.05
single, multi stage well points 21-06-17 9.15 to 10.05
vacuum well points andDeep well
Electro-osmosis 28-06-17 9.15 to 10.05Objectives of grouting,
grouting methods 30-06-17 1.40 to 3.20
grouts and their properties 10/7/2017 9.15 to 10.05
Ascending grouting, 11/7/2017 9.15 to 10.05descending and stage
grouting 14-07-17 1.40 to 3.20
hydraulic fracturing in soils and rocks- post
grout test21-07-17 1.40 to 3.20
In – situ densification methods in granular
Soils: Vibration at the ground surface
24-07-17 9.15 to 10.05
23-06-17 1.40 to 3.20
183 Sri G.D.R.Naidu
EQS SF-19
E-Block / department of
civil engineering
EE-I SF-7
184 U. Sravan Kumar GTE- lab B.Tech (IV-I B) GTE lab SHED-1
Impact at the Ground Surface 26-07-17 9.15 to 10.05
Vibration at depth, Impact at depth 31-07-17 9.15 to 10.05
In – situ densification methods in Cohesive soils: Preloading or
dewatering
2/8/2017 9.15 to 10.05
Vertical drains – Sand Drains, Sand wick -
geodrains9/8/2017 9.15 to 10.05
Stone and lime columns, thermal
methods11/8/2017 1.40 to 3.20
Reinforced Earth: Principles –
Components of reinforced earth
23-08-17 9.15 to 10.05
factors governing design of reinforced
earth walls28-08-17 9.15 to 10.05
Geosynthetics : Types 8/9/2017 2.30 to 3.20Geotextiles- Types,
Functions and applications
11/9/2017 9.15 to 10.05
Geogrid- Functions and applications 13-09-17 9.15 to 10.05
Geomembrane- Functions and
applications18-09-17 9.15 to 10.05
Expansive soils;introduction 18-09-17 9.15 to 10.05
Foundation techniques in expansive soils 6/10/2017 1.40 to 3.20
methods of de-watering- sumps and
interceptor ditches19-06-17 9.15 to 10.05
single, multi stage well points 21-06-17 3.20to 4.10
vacuum well points andDeep well , Electro-
osmosisObjectives of grouting,
grouting methods 1/7/2017 9.15 to 10.05
hydraulic fracturing in soils and rocks- post
grout test12/7/2017 1.40 to 3.20
In – situ densification methods in Cohesive soils: Preloading or dewatering, Vertical drains – Sand Drains
9/8/2017 1.40 to 2.30
Sand wick –geodrains, Stone and
lime columns9/8/2017 3.20 to 4.10
thermal methods 16-08-17 1.40 to 2.30Reinforced Earth:
Principles – Components of reinforced earth
16-08-17 2.30to 3.20
factors governing design of reinforced
earth walls23-08-17 2.30 to 3.20
Geosynthetics : Types 2/9/2017 9.15 to 10.05
185 Sri B.Eswara Rao
GIT (IV B.Tech -I Sem A) SF-22
E-Block / Civil Engineering
under reamed piles 9/10/2017 9.15 to 10.05
GIT (IV B.Tech -I Sem-B) SF-19
24-06-17 1.40 to 3.20
Geotextiles- Types, Functions and
applications4/9/2017 3.20 to 4.10
Geogrid- Functions and applications 6/9/2017 1.40 to 2.30
Geomembrane- Functions and
applications11/9/2017 3.20 to 4.10
Expansive soils;introduction 4/10/2017 1.40 to 3.20
Foundation techniques in expansive soils 6/10/2017 1.40 to 3.20
Earthquake engineering source,
focus, epicenter05.12.2017 1.40 p.m. to 2.30 p.m.
Types of faults, Definition,
Applications, Fault line07.12.2017 11.10a.m. to 12.50 p.m.
Theories of earthquake, Elastic
rebound theory, Theory of plate
tectonics, Continental drift theory
11.12.2017 3.20 p.m. to 4.10 p.m.
Types of earthquake, Classification of
earthquake, Reasons for occurrence of
earthquake
14.12.2017 11.10 a.m. to 12.50 p.m.
Earthquake measurement and
magnitude, modified mercali, Ritcher scale
18.12.2017 3.20 p.m. to 4.10 p.m.
Waves created by earthquake,
Claasification of P waves, S- waves, R
waves, L waves
19.12.2017 1.40 p.m. to 2.30 p.m.
Seismic zoning map of india, Zone-ii, Zone-iii, Zone-iv and zone -
v
21.12.2017 11.10 a.m. to 12.50 p.m.
Zoning importance as per IS 1893-2002 (part-
i)02.01.2018 1.40 p.m. to 2.30 p.m.
Measurement of earthquake using
seismograms04.01.2018 11.10 a.m. to 12.50 p.m.
Joints, valves such as sluice valves, air
valves & check valves water meters
24-08-2017 9.15 to 10.55
Pumping and testing of distribution system 26-08-2017 1.40 to 2.30
Sewer appurtenances manhole, inverted
siphon, catch basin, fleshing tanks &
ejectors
26-9-2017 9.15 to 10.05 & 1.40 to 2.30
Road network patterns 23/6/17 9.15 to 10.05Highway alignments 30/6/17 1.40 to 2.30Brief conclusion on traffic parameters &
traffic count19/8/17 12.00 to 12.50
Parking studies 21/8/17 9.15 to 10.05Road accident causes & preventive measures 26/8/17 9.15 to 10.05
187 Sri G.Anil Kumar
ENVIRONMENTAL
ENGINEERINGSF-22
E-BLOCK
TRANSPORTATION
ENGINEERINGSF-17
186 Sri P.Manoj Kumar ERD (III-II A&B) E/ SF-19 E-Block / Civil Engineering
Brief conclusion on traffic signs & signals 11/9/2017 12.00 to 12.50
Brief conclusion on types of intersections
& conflict points25/9/17 1.40 to 2.30
25-11-2017 11:10 to 12:40(3,4) PM
13-01-2018 11:10 to 12:40(3,4) PM
10/2/2018 11:10 to 12:40(3,4) PM
24-02-2018 11:10 to 12:40(3,4) PM
17-03-2018 11:10 to 12:40(3,4) PM
Types of folds and faults 22-09-17 1.40 to 2.30
Types of joints and unconformities 22-09-17 2.30 to 3.20
Tunnels, lining of tunnels 3/10/2017 9.15to 10.05
Geophysical Investigations,
Importance, gravity method
6/10/2018 1.40 to 2.30
Seismic, magnetic, radiometric and
electrical methods7/10/2017 1.40 to 2.30
Different methods of study of minerals 10/7/2017 9.15to 10.05
Physical properties of minerals 10/7/2017 11.10 to 12.00
Types of joints and unconformities 25-09-17 11.10 to 12.00
10.05to 10.55
Geophysical Investigations,
Importance ,methods8/10/2017 9.15to 10.05
Gravity, seismic, electrical, magnetic, radiometric methods
8/10/2017 10.05 to 10.55
Water demand and factors affecting per
capita demand15-06-17 1.40 to 2.30
Population forecasting methods and water
quality testing20-06-17 1.40 to 2.30
Intakes and infiltration galleries 27-06-17 1.40 to 2.30
Sedimentation and factors affecting
coagulation30-06-17 10.05 to 10.55
Flocculation and clarifier design 11/7/2018 1.40 to 2.30
Disinfection, chlorination 15-07-18 1.40 to 2.30
Distribution systems 8/8/2017 10.05 to 10.55Service reservoir and
capacity reservoir 8/8/2017 1.40 to 2.30
Pipe laying and testing of pipe lines 22-08-17 10.05 to 10.55
Pump house 24-08-17 1.40 to 2.30Conservancy system and water carriage
system29-08-17 1.40 to 2.30
Storm water estimation 7/9/2017 1.40 to 2.30
189 Sri G.Prasanna Kumar
Engineering Geology (B. Tech-
II-I Sem-A Section)
SF-7
E-Block / Civil Engineering
Engineering Geology (B. Tech-
II-I Sem-B Section)
SF-8Tunnels, lining of tunnels 7/10/2017
190 MsP.Puspalatha
ENVIRONMENTAL
ENGINEERING (IVB. Tech-I Sem
Sec- B)
SF-18 E-Block / Civil Engineering
188 Sri P.Ram Prasad DSS (B. Tech III-II (A))
Introduction& applications Steel
SF-17 E-Block/ Civil Engineering
Laterally supported,Un supported beams designLacing battens design
principles.Introduction& working
of gantry girderIntroduction& working
of plate girder
Cycles of decomposition 14-09-17 1.40 to 2.30
BOD equationULTIMATE disposal
of sewageSewage farming 19-09-17 1.40 to 2.30
Septic tank and soak pit 7/10/2017 1.40 to 2.30
Imhoff tank 7/10/2017 1.40 to 2.30Essentials Of
Theodolite 17.8.17 1.40-2.30
Measurements Of Theodolite 21.8.17 9.15-10.5
Gps 24.8.17 1.4Chain Traversing 07.9.17 1.40-2.30
Compass Traversing 8.9.17 3.20-4.10Trignometric Levelling 14.9.17 1.40-2.30
Curves 25,28,29/9/17 9.15-10.05Episodesof Air
Pollution 20.6.17 11.10-12.50
Sources Of Air Pollution 27.6.17 11.10-12.50
Effects Of Air Pollution In Man
,Material ,Vegetation14.07.17 11.10-12.50
Control Of Particulates ByEsp,Gsc 25.07.17 11.10-12.50
Methods Of Control Of Gaseous
Contaminants8.9.17 11.10-12.50
Types Of Flows,Types Of Channels 6.12.17 1.40-2.30
Classification Of Turbines,Layout Of
Hydropower Installation
19.12.17 9.15-10.50
Charecterstics Curves 21.03.18 1.40-2.30
Hydrological Cycle 21.11.17 1.40-2.30Hydrograph Components 14.12.17 9.15-10.55
Necessity Of Irrigation 1.2.18 9.15-10.55Classification Of
Channels 12.2.18 1.40-3.20
10:05 to 10:55AM
Eight noded iso parametric
quadrilateral elemrnt12/3/2018 11:10 AM to 12:10 PM
Axi-Symmetric analysis basic
principles15-03-2018 10:05 AM to 10:55 AM
Four noded Rectangular &
Quadrilateral Element Concept
20-02-2018 11:10 AM to 12:10 PM
Eight noded iso parametric
quadrilateral element23-02-2018 09.15 AM to 10:55 AM
Axi-Symmetric analysis basic
principles6/3/2018 11:10 AM to 12:10 PM
191 Sri Krupasindhu Biswal
surveying SF-08
E-Block / Civil Engineering
AQM SF-19
HHM SF-08
WRE SF-18
192 Sri B.GovindaRajulu
FEM (B. Tech IV-II (A))
Four noded Rectangular & 22-02-2018
SF-22
E-Block / Civil Engineering
FEM (B. Tech IV-II (B)) SF-19
Estimation and characteristics of
sewage12/9/2017 1.40 to 2.30
19-09-17 1.40 to 2.30
Basic parameters of traffic
Volume, Speed & Density
Traffic Volume Studies, Speed studiesData Collection and
Presentation 4/9/2017 09:15- 10:05
1:40- 3:20,09:15- 10:05
Road accidentsCauses and Preventive
measuresAccident data
recordingCondition and
collision diagramsRoad traffic signs 15-09-2017 09:15- 10:05
Types and specifications
Road markings
Need for road markings
Types of road markings
Design of traffic Webster method
IRC MethodTypes of intersections 7/10/2017 1:40- 3:20
Canalization objectivesTraffic islandsDesign criteriaRotary types
Types of grade separated intersections
Rotary intersectionFlyover, ROB, Clover
leafCriteria for selection
Advantages and Disadvantages of grade separated
IntersectionsIntroduction to
highway construction 15-12-2017 11:10 – 12:00
Construction of earth 18-12-2017 9:15- 10:05Construction of gravel
roads 20-12-2017 9:15- 10:05
Construction of WBM roads
Construction of bituminous roads
Construction of Cement Concrete roads 5/1/2018 9:15- 10:05
Construction of Reinforced Cement
Concrete roads5/1/2018 9:15- 10:05
Failures of flexible and rigid pavements 5/1/2018 11:10 – 12:50
Strengthening of existing pavements 8/1/2018 9:15- 10:05
Highway drainage and importance
Surface and subsurface drainage
193 MrsCh.Mounica
Transportation Engineering (B Tech III-I- A)
28-08-2017 09:15- 10:05
SF-18
E-Block / Civil Engineering
Parking studies and Parking characteristics
07-09-2017, 08-09-2017
11/9/2017 09:15- 10:05
13-09-2017 1:40- 3:20
18-09-2017 1:40- 3:20
23-09-2017 1:40- 3:20
5/10/2017 1:40- 3:20
8/10/2017 09:15- 10:05
10/10/2017 09:15- 10:05
22-12-2017 11:10 – 12:50
19-01-2018 11:10 – 12:50
Introduction to Railway engineering 27-01-2018 9:15- 10:05
Permanent way components, Cross
section of permanent way
29-01-2018 9:15- 10:05
Function of rails, sleepers and ballast 31-01-2018 9:15- 10:05
Rail fastenings 14-02-2018 9:15- 10:05Creep of rails 14-02-2018 9:15- 10:05
Theories related to creep
Adzing of sleepersSleeper density
Rail joints, welding of rails
Creep of railsTurnouts, Track
Junctions 21-02-2018 9:15- 10:05
Points and crossingsTrack drainage
Railway stations and yards
SignalingAirport layout design 14-03-2018 9:15- 10:05
Computation of runway length 15-03-2018 2:30 -03:20
Runway lightening system
Taxiways, ApronControl tower,
Terminal BuildingIntroduction to environmental engineering lab,
Physical and chemical parameters
Introduction to biological parameters 17/08/2017 10:05 to 12:50
Classification of Surveying 4/7/2017 1:40-2:30
Introduction on Leveling 25-07-2017 10:05-10:55
Definitions, methods of leveling, Leveling
instruments27-07-2017 10:05-12:00
Differential Leveling, Profile leveling 17-08-2017 10:05-12:00
Introduction to Trigonometric leveling 5/10/2017 10:05-10:55, 3:20-4:10
Calculation of the cost of Brickwork 8/9/2017 9:15-10:05
Calculation of the cost of Plastering 8/9/2017 10:05-10:55
Contracts-types of contract 25/9/2017 10:05-10:55
Contract documents 25/9/2017 10:05-10:55Condition of contract 5/10/2017 9:15-10:05
Flanged sections Introduction 23/8/2017 9:15-10:05
Introduction to shear 13/9/2017 9:15-10:05Introduction to slabs 4/10/2017 9:15-10:05Hydrological cycle 24/11/2017 9:15-10:05
Hydrograph-components 15/12/2017 10:05-10:55
Necessity of Irrigation 8/3/2018 9:15-10:05Ill types of Irrigation 8/3/2018 10:05-10:55
196 Sri B.Venkata Ramana
EQS (B.Tech-IV-I ‘A’) SF-22
E-Block/Civil Engineering
D&DCS-I (B.Tech, III-I ‘B’) SF-17
WRE (B.Tech, III-II ‘B’) SF-17
194 K. Krishna EE lab (IV-I B)19/06/2017 10:05 to 12:50
SF-12 E-Block / Civil Engineering
195 Sri S.Uday Kiran Surveying (II-I, A ) SF-07 E-Block/Civil
Engineering
Transportation Engineering-II (B
Tech III-II- B)SF-17
16-02-2018 11:10 – 12:50
19-02-2018 9:15- 10:05
26-02-2018 9:15- 10:05
28-02-2018 9:15- 10:05
19-03-2018 9:15- 10:05
Methods of Irrigation 15/3/2018 9:15-10:55Introduction to open
channel 7/12/2017 1:40-2:30
Types of channels 7/12/2017 3:20-4:10Turbines -Introduction 19/2/2018 9:15-10:55Characteristic curves
of turbines 9/3/2018 9:15-10:55
Effect of orientation 15-03-2018 10:05 to 10:55 AMFind out the facing of
a house 15-03-2018 11:10 AM to 12:10 PM
Earth orbital motion round the sun 17-03-2018 11:10 AM to 12:10 PM
Drawing of sun path diagram, Use of sun
path diagram17-03-2018 12:10 PM to 12:50 PM
Find out the facing of a house 8/3/2018 2:30 PM to 03:20 PM
Earth orbital motion round the sun 8/3/2018 3:20 PM to 4:10 PM
Drawing of sun path diagram, Use of sun
path diagram15-03-2018 2:30 PM to 04:10 PM
Introduction to railways 23-01-2018 09:15 to 10:05 AM
Permanent way components 23-01-2018 10:05 to 10:55 AM
Cross- section of permanent way 25-01-2018 10:05 to 10:55 AM
Functions of rails, sleepers and ballast 31-01-2018 09:15to 10:55 AM
Theorey related to creep 14-02-2018 09:15to 10:55 AM
Adzing od sleepers, 15-02-2018 09:15to 10:55 AMSleepers density 22-02-2018 09:15to 10:55 AM
Points and crossings 28-02-2018 09:15to 10:55 AMIntroduction to road
materials and it’s properties ,Aggregate
tests
19/06/2017 01:40 to 004:10 PM
Introduction to Bitumen tests 7/8/2017 01:40 to 004:10 PM
18-07-2017 10:05 to 12:00 SF-22-IV year Sec- AIV year Sec- BSF-19
IV year Sec- ASF-22
IV year Sec- BSF-19
IV year Sec- ASF-22
IV year Sec- BSF-19
IV year Sec- ASF-22
198 G. Shanmuka Rao TE- lab III-I B.Tech (A) TE- lab Shed-2
199Bosukonda Surya
Prakasa rao (Adjunct Faculty)
RS & GIS GIS & Geometric corrections
E-Block/ Civil Engineering
19-07-2017 10:05 to 12:00
12/12/2017 10:05 to 12:00
13-12-2017 10:05 to 12:00
3/1/2018 10:05 to 12:00
4/1/2018 10:05 to 12:00
20-02-2018 10:05 to 12:00
HHM (B.Tech, II-II ‘A’) SF-07
197 MsK.Divya
BPD (B. Tech II-II (A)) SF-07
E-Block/ Civil Engineering
BPD (B. Tech II-II (B))
Effect of orientation 8/3/2018 01:40 to 02:30 PM
SF-08
TE-II (B.Tech III-I (A)) SF-18
Rail fastenings and creep of rails 6/2/2018 09:15to 10:55 AM
IV year Sec- BSF-19
IV year Sec- ASF-22
IV year Sec- BSF-19III year Sec- ASF-17III year Sec- BSF-18III year Sec- ASF-17III year Sec- BSF-18
IV year Sec- ASF-22
IV year Sec- B
14-09-2017 SF-19III year Sec- ASF-17III year Sec- BSF-18II year Sec- ASF-07II year Sec- BSF-08
24-07-2017 10:05 to 12:00 IV year Sec- A-SF-22
IV year Sec- BSF-19
16-08-2017 10:05 to 12:00II year Sec- ASF-07 II year Sec- BSF-08II year Sec- ASF-07II year Sec- BSF-08
IV year Sec- ASF-22
IV year Sec- BSF-19
IV year Sec- ASF-22
IV year
201 Sarraju Venkata Vijay Kumar (Adjunct Faculty)
Reinforced cement concrete
RCC & Reinforced concrete structures
E-Block/ Civil Engineering
25-07-2017 10:05 to 12:00
202 Kati Vasu (Adjunct Faculty)
Construction Management
Construction Management
E-Block/ Civil Engineering
17-08-2017 10:05 to 12:00
7/9/2017 10:05 to 12:00
8/9/2017 10:05 to 12:00
10/10/2017 10:05 to 12:00
11/10/2017 10:05 to 12:00
3/11/2017 10:05 to 12:00
200 S.Hemanth Reddy (Adjunct Faculty) Surveying Surveying and total
station
20-07-2017 2:30 to 04:10
E-Block/ Civil Engineering
21-07-2017 2:30 to 04:10
9/8/2017 2:30 to 04:10
10/8/2017 2:30 to 04:10
13-09-2017 2:30 to 04:10
2:30 to 04:10
4/10/2017 2:30 to 04:10
5/10/2017 2:30 to 04:10
8/11/2017 2:30 to 04:10
9/11/2017 2:30 to 04:10
21-02-2018 10:05 to 12:00
20-03-2018 10:05 to 12:00
21-03-2018 10:05 to 12:00
Sec- BSF-19
22-08-2017 2:30 to 04:10IV year Sec- A SF-22
IV year Sec- BSF-19
IV year Sec- ASF-22
IV year Sec- BSF-19
IV year Sec- ASF-22
IV year Sec- BSF-19III year Sec- ASF-17III year Sec- BSF-18III year Sec- ASF-17III year Sec- BSF-18III year Sec- ASF-17III year Sec- BSF-18III year Sec- ASF-17III year Sec- BSF-18III year Sec- ASF-17III year Sec- BSF-18
10.05To
10.559.15To
10:0510.05
To 10.559.15To
10:0510.05
To10.5511:10
To
10:05 to 12:00
13-03-2018 10:05 to 12:00
FAA-I Sem
Financial Analysis 22.11.17
G.F.27
Cash flow analysis 29.11.17
Analysis and Interpretation 29.11.17
Analysis through ratios 30.11.17
DuPont chart 30.11.17
Investment Decision 03.02.18
203 D.Muddu Krishnam Naidu (Adjunct Faculty)
Construction Management
Construction Management
E-Block/ Civil Engineering
23-08-2017 2:30 to 04:10
11/9/2017 10:05 to 12:00
12/9/2017 10:05 to 12:00
16-10-2017 10:05 to 12:00
17-10-2017 10:05 to 12:00
14-11-2017 10:05 to 12:00
15-11-2017 10:05 to 12:00
4/12/2017 10:05 to 12:00
5/12/2017 10:05 to 12:00
8/1/2018 10:05 to 12:00
9/1/2018 10:05 to 12:00
12/2/2018 10:05 to 12:00
13-02-2018 10:05 to 12:00
12/3/2018
4/11/2017 2:30 to 04:10
12:009.15To
10:0512:00
To12:5011:10
To12:009.15To
10:059.15To
10:0510.05
To 10.559.15To
10:0510.05
To 10.559.15To
10:0510.05
To10.5511:10
To12:0011:10
To12:0012:00
To12:5010.05
To10.559.15To
10:0512:50
To1:30
11:10To
12:001:40To
2:302:30To
3:209.15To
10:059.15To
10:0512:00
To12:50
B&LE-I Sem
NI ACT 23.11.17
G.F.27
NI ACT 23.11.17
Characteristics of NI 24.11.17
Kinds of NI 25.11.17
Endorsement, presentation of NI 25.11.17
MM-II Sem
Promotion Decision 06.04.18
G.F.27
Developing integrated marketing
communication09.04.18
Role of Marketing Communication 12.04.18
20.07.17
G.F.26
Cost Accounting vs Management Accounting
20.07.17
Cost Accounting vs Financial Accounting 25.07.17
Role of Accounting Information 27.07.17
Management Process 28.07.17
FRM-IV Sem
Derivatives 18.01.18
G.F.26
Forward contracts 10.02.18
Future contracts 16.02.18
Swaps 26.02.18
Options 15.03.18
204 Dr.B.Balaram A Block MBA
FM-II SEM G.F.27
Payback method 06.02.18
Average rate of return 09.02.18
NPV 12.02.18
IRR 15.02.18
C&MA-III Sem
Cost Accounting
12:50To
1:309.15To
10:0510.05
To 10.559.15To
10:0510.05
To 10.5511:10
To12:0012:50
To1:30
11:10To
12:009.15To
10:059.15To
10:0511:10
To12:009.15To
10:0510.05
To10.5511:10
To12:0012:00
To12:5012:50
To1:30
11:10To
12:009.15To
10:0512:00
To12:509.15To
10:0512:00
To12:5012:00
To12:509.15
Case Study 16.09.17
Extension and contraction of demand 18.10.17
Elasticity concept 21.10.17
Cost Concepts 04.11.17
L&SCM-IV Sem
Logistics in global Economy 13.03.18
G.F.26
Views of Global logistics 14.03.18
Global supply chain management 16.03.18
Supply chain process 17.03.18
Global operating levels 19.03.18
ME-I Sem
Basic Economic Principles 13.09.17
G.F.27
30.10.17
Mutual Funds Management 31.10.17
Guidelines for mutual funds 31.10.17
Working of public and private Mutual funds 01.11.17
IFM-IV Sem
Short Term Asset Liability Management 14.03.18
G.F.26
Receivables Management 15.03.18
Inventory Management 16.03.18
Payment methods of International trade 17.03.18
Trade finance method 20.03.18
205 Dr.B.Siva Kumar A Block MBA
Managing Mass Communication 12.04.18
Advaertising 13.04.18
FIS-III Sem
Mutual Funds 25.10.17
G.F.26
Mutual funds functions and portfolio
classification
To10:0510.05
To 10.5510.05
To 10.559.15To
10:059.15To
10:0510.05
To 10.5510.05
To 10.559.15To
10:05Role of Media 10.05A Case Study TO
10.559.15To
10:059.15To
10:0510.05
To10.5510.05
To10.5510.05
To10.559.15To
10:0511:10
To12:0010.05
To10.559.15To
10:0510.05
To 10.5510.05
To 10.5510.05
To 10.5510.05
To 10.5510.05
To
Ethics in HR 09.02.18
MTP-I Sem
Management Concept 13.09.17
G.F.27
Organisation – Nature of Organising 18.09.17
Principles of Mangement 19.09.17
Departmentation 10.10.17
Functions of Management 23.10.17
Leading – Dimension 24.10.17
A Block MBA
Production Function 06.11.17
C&MA-II Sem
Management Accounting Vs Cost
Accounting09.01.18
G.F.27
Direct and Indirect Cost 29.01.18
Overhead apportionment 02.02.18
Dropping a product line 16.03.18
Budgetary Control 28.03.18
Cash Budget 11.04.18
ADBM-III Sem
Classification of Advertisement 20.07.17
G.F.26
04.08.17
A Case Study 10.08.17
206 Dr.C.P.Patnaik
Idea Connection 21.09.17
Brand Strategy 20.10.17
BE&CG-IV Sem
Nature and Scope 06.12.17
G.F.26
Case Study Review 13.12.17
Advertising Ethics 12.01.18
Ethics in Finance Management 06.02.18
10.559.15To
10:0510.05
To 10.559.15To
10:0510.05
To 10.559.15To
10:0512:00
To12:509.15To
10:059.15To
10:059.15To
10:0511:10
To12:009.15To
10:0511:10
To12:0010.05
To10.5510.05
To10.559.15To
10:0510.05
To10.5510.05
To10.559.15To
10:0512:00
To12:5012:00
To12:509.15To
10:059.15To
10:05
RM & SM-IV Sem
Structure of Indian Retail Industry 11.12.17
G.F.26
Growth strategy 18.12.17
Pricing Strategies 19.12.18
Classification of format 10.01.18
11.04.18
CBCRM-III Sem
Models of buyer behavior 26.07.17
G.F.26
Psychology foundation of consumer behavior 03.08.17
Communication 16.08.17
Consumer dispute redressal agencies 23.09.17
Customer Relationship Management 05.10.17
Evolution of relationship marketing 07.10.17
IM-IV Sem
International Environmental 16.12.17
G.F.26
Market Analysis 30.12.17
Product Design and standardization 23.01.18
Distribution Channel Concept 24.02.18
Management of Physical Distribution 03.03.18
International Pricing strategy 07.03.18
207 Dr.Saumendra Das A Block MBA
RM-II Sem
Global Retailing 10.01.18
G.F.27
Retail Strategy 18.01.18
Retail Location 27.01.18
Shopping behavior 15.02.18
Market Structure 14.03.18
Classification of Formats
12:00To
12:5012:00
To12:5011:10
To12:0011:10
To12:009.15To
10:059.15To
10:0510.05
To 10.5512:00
To12:5012:50
To1:30
12:00To
12:5011:10
To12:009.15To
10:059.15To
10:0510.05
To 10.5510.05
To 10.5510.05
To 10.559.15To
10:059.15To
10:0510.05TO
10.5510.05TO
10.559.15To
10:059.15To
10:0510.05
360 Degrees Appraisal 02.01.18
G.F.27
Emerging Trends in HRM 22.01.18
Training and Development 29.01.18
Compensation 21.02.18
Statutory and Non statutory provision 17.03.18
Nature and Importance of HR Audit 10.04.18
SHRM-III Sem
Investment consideration in
training19.08.17
G.F.23
Flexible work arrangement 04.09.17
HR and BPR 04.09.17
Approaches to international compensation
26.09.17
Global Competitive Manager 21.10.17
A Block MBA
209 Sri P.T.Raju
MIR-III Sem Employment Structure 08.08.17 G.F.23
A Block MBABRM & CSA-II Sem One way Anova 18.04.18 G.F.27
GHRM-IV Sem Compensation practices 17.02.18 G.F.23
210 Smt.D.Pranaya
BC-I Sem
Business Writing Skills 17.10.17
G.F.27
A Block MBA
Types of reports 27.11.17
Presentation Skills 27.11.17
Formats of Interviews 29.11.17
HRM-II Sem
Safety at work 04.04.18
Segmentation Category 12.02.18
Objective of Pricing 05.03.18
208 Sri Tapas Bantha OB--I Sem Self Efficacy 18.11.17 G.F.27
To10.559.15To
10:0510.05
To10.559.15To
10:0511:10
To12:00
ARTICLES 16-09-17 10.05 to 11.0010.05
To11
10.05To11
10.05To11
11To
11.5ARTICLES 16-09-17 01.40 to 02.30
12.5To1.411To
11.52.3To3.22.3To3.21.4To2.311To
11.59.15To
10.05
10.05To11
1.4To2.3
ARTICLES 18-09-17 9.15 to 10.05 TENSES 3/10/2017 “
PARAGRAPH WRITING 23-10-17 “
PREPOSITIONS 1/11/2017 “GERENDS AND
INFINITIVES 6/11/2017 “
ARTICLES 18-09-17 10.05 to 11.00TENSES 4/10/2017 “
20-01-18
SF-16
SITUATIONAL DIALOGUES 9/2/2018
NOTE TAKING AND NOTE MAKING 26-02-18
READING SKILLS 19-03-18
REVIEWING AN ARTICLE 7/4/2018
ENGLISH (B.Tech-Mech-A
I-I Sem)FF 9
212 Sri N.Sai Babu IM-III Sem Mutual Fund portfolio Evaluation 23.10.17 G.F.26 A Block MBA
213 Dr. P. Prasantham
ENGLISH (B.Tech-ECE-A
I-I Sem)SF-16
A-Block / ECE
TENSE 26-09-17
PARAGRAPH WRITING 14-10-17
PREPOSITIONS 24-10-17
GERENDS AND INFINITIVES 8/11/2017
ENGLISH (B.Tech-ECE-B
I-I Sem)SF-15
TENSE 26-09-17
PARAGRAPH WRITING 16-10-17
PREPOSITIONS 27-10-17
GERENDS AND INFINITIVES 11/11/2017
ECP (B.Tech-ECE-A I-II Sem
VOICE AND REPORTED SPEECH
PFM-IV Sem G.F.23
PMS 16.03.18
Performance Management cycle 17.03.18
E - Performance 22.03.18
211 Sri V.Vinod Kumar QABD-I Sem Game theory 22.11.17 G.F.27 A Block MBA
PARAGRAPH WRITING 23-10-17 “
PREPOSITIONS 2/11/2017 “GERENDS AND
INFINITIVES 7/11/2017 “
VOICE AND REPORTED SPEECH 8/1/2018 12.50 to 1.40
SITUATIONAL DIALOGUES 5/2/2018 “
NOTE TAKING AND NOTE MAKING 21-02-18 “
READING SKILLS 14-03-18 “REVIEWING AN
ARTICLE 23-03-18 “
ARTICLES 15-09-17 10.05 to 11.00TENSES 26-09-17 12.50 to 1.40
PARAGRAPH WRITING 23-10-17 11.00 to 11.50
PREPOSITIONS 31-10-17 12.50 to 1.40GERENDS AND
INFINITIVES 17-11-17 11.00 to 11.50
ARTICLES 15-09-17 3.20 to 4.10TENSES 26-09-17 10.05 to 11.00
PARAGRAPH WRITING 23-10-17 10.05 to 11.00
PREPOSITIONS 30-10-17 10.05 to 11.00GERENDS AND
INFINITIVES 17-11-17 3.20 to 4.10
VOICE AND REPORTED SPEECH 30-01-18 11.00 to 11.50
SITUATIONAL DIALOGUES 22-02-18 12.50 to 1.40
NOTE TAKING AND NOTE MAKING 3/3/2018 3.20 to 4.10
READING SKILLS 28-03-18 11.10 to 12.00REVIEWING AN
ARTICLE 18-04-18 11.00 to 11.50
VOICE AND REPORTED SPEECH 27-01-18 10.05 to 11.50
SITUATIONAL DIALOGUES 21-02-18 10.05 to 11.00
NOTE TAKING AND NOTE MAKING 3/3/2018 10.05 to 11.50
READING SKILLS 28-03-18 10.05 to 11.00REVIEWING AN
ARTICLE 18-04-18 10.05 to 11.00
GENERAL ENGLISH THEME DETECTION 7/8/2017 10:05 to 12:50 C-Block/
Module 2 BUSINESS LETTER ETIQUITTEE 22/08/2017 10:05 to 12:50 Electrical
IIIB.Tech EMAIL WRITING 9/9/2017 10:05 to 12:50 EngineeringEEE-A ESSAY WRITING 12/9/2017 10:05 to 12:50I Sem SPOTTING ERRORS 19/09/2017 10:05 to 12:50
SENTENCE COMPLETION 12/10/2017 10:05 to 12:50
GENERAL ENGLISH THEME DETECTION 7/8/2017 13:40 to 16:10 C-Block/
Module 2 BUSINESS LETTER ETIQUITTEE 22/08/2017 13:40 to 16:10 Electrical
IIIB.Tech EMAIL WRITING 9/9/2017 13:40 to 16:10 EngineeringEEE-B ESSAY WRITING 12/9/2017 13:40 to 16:10I Sem SPOTTING ERRORS 19/09/2017 13:40 to 16:10
SENTENCE COMPLETION 12/10/2017 13:40 to 16:10
215 N. Indumati
ENGLISH (B.Tech-CSE-A I-
I Sem)FF- 11
D-Block / Computer Science & Engineering
ENGLISH (B.Tech-CSE-C I-
I Sem) FF- 9
ENGLISH (B.Tech-CSE-A I-
II Sem)FF-11
ENGLISH (B.Tech-CSE- I-
II Sem)FF-9
SF - 12
SF - 13
214 Mr. M.PapinaiduE-Block /
Mechanical Engineering
ENGLISH (B.Tech-CE-B I-I
Sem)SF 8
ENGLISH (B.Tech-CE-A I-
II Sem)SF-9
GENERAL ENGLISH THEME DETECTION 15/06/2017 13:40 to 16:10 C-Block/
Module 2 BUSINESS LETTER ETIQUITTEE 22/06/2017 13:40 to 16:10 Electrical
IIIB.Tech EMAIL WRITING 29/06/2017 13:40 to 16:10 EngineeringEEE-C ESSAY WRITING 13/07/2017 13:40 to 16:10I Sem SPOTTING ERRORS 20/07/2017 13:40 to 16:10
SENTENCE COMPLETION 27/07/2017 13:40 to 16:10
GENERAL ENGLISH THEME DETECTION 15/06/2017 10:05 to 12:50 E-Block /
Module 2 BUSINESS LETTER ETIQUITTEE 22/06/2017 10:05 to 12:50 Mechanical
IIIB.Tech EMAIL WRITING 29/06/2017 10:05 to 12:50 EngineeringMECH-A ESSAY WRITING 13/07/2017 10:05 to 12:50
I Sem SPOTTING ERRORS 20/07/2017 10:05 to 12:50 SENTENCE
COMPLETION 27/07/2017 10:05 to 12:50
GENERAL ENGLISH THEME DETECTION 18/06/2017 13:40 to 16:10 E-Block /
Module 2 BUSINESS LETTER ETIQUITTEE 22/08/2017 13:40 to 16:10 Mechanical
IIIB.Tech EMAIL WRITING 29/08/2017 13:40 to 16:10 EngineeringMECH-B ESSAY WRITING 5/9/2017 13:40 to 16:10
I Sem SPOTTING ERRORS 12/9/2017 13:40 to 16:10 SENTENCE
COMPLETION 12/19/2017 13:40 to 16:10
GENERAL ENGLISH THEME DETECTION 13/06/2017 10:05 to 12:50 E-Block/Civil
Module 2 BUSINESS LETTER ETIQUITTEE 20/06/2017 10:05 to 12:50 Engineering
IIIB.Tech EMAIL WRITING 27/06/2017 10:05 to 12:50CIVIL-A ESSAY WRITING 18/07/2017 10:05 to 12:50
I Sem SPOTTING ERRORS 25/07/2017 10:05 to 12:50 SENTENCE
COMPLETION 8/7/2017 10:05 to 12:50
GENERAL ENGLISH THEME DETECTION 14/06/2017 13:40 to 16:10 E-Block/Civil
Module 2 BUSINESS LETTER ETIQUITTEE 21/06/2017 13:40 to 16:10 Engineering
IIIB.Tech EMAIL WRITING 28/06/2017 13:40 to 16:10CIVIL-B ESSAY WRITING 19/07/2019 13:40 to 16:10
I Sem SPOTTING ERRORS 26/07/2017 13:40 to 16:10 SENTENCE
COMPLETION 8/9/2017 13:40 to 16:10
GENERAL ENGLISH THEME DETECTION 12/18/2017 11:10 to 12:50
Module 2 BUSINESS LETTER ETIQUITTEE 12/21/2018 11:10 to 12:50
IIIB.Tech EMAIL WRITING 22/01/2018 11:10 to 12:50ECE-A ESSAY WRITING 29/01/2018 11:10 to 12:50II Sem SPOTTING ERRORS 02-2-0182 11:10 to 12:50
SENTENCE COMPLETION 19/02/2018 11:10 to 12:50
GENERAL ENGLISH THEME DETECTION 199-12-2017 13:40 to 15:20
Module 2 BUSINESS LETTER ETIQUITTEE 12/21/2018 13:40 to 15:20
IIIB.Tech EMAIL WRITING 22/01/2018 13:40 to 15:20ECE-B ESSAY WRITING 29/01/2018 13:40 to 15:20II Sem SPOTTING ERRORS 02-2-0182 13:40 to 15:20
SENTENCE COMPLETION 19/02/2018 13:40 to 15:20
GENERAL ENGLISH THEME DETECTION 12/21/2018 11:10 to 12:50
Module 2 BUSINESS LETTER ETIQUITTEE23/01/2018 11:10 to 12:50IIIB.Tech EMAIL WRITING 30/01/2018 11:10 to 12:50
216
K.N.Murty
SF - 14
FF-12
FF-13
SF-10
SF-11
FF-11
A-Block / Electronics &
Communication Engineering
FF-11
A-Block / ELECTRONICS
& COMMUNICATION Engineering
FF-13
A-Block / ELECTRONICS
&
ECE-C ESSAY WRITING 27/02/2018 11:10 to 12:50II Sem SPOTTING ERRORS 3/3/2018 11:10 to 12:50
SENTENCE COMPLETION 13/03/2018 11:10 to 12:50
GENERAL ENGLISH THEME DETECTION 20/12/2017 11:10 to 12:50
Module 2 BUSINESS LETTER ETIQUITTEE 31/01/2017 11:10 to 12:50
IIIB.Tech EMAIL WRITING 14/02/2017 11:10 to 12:50CSE-B ESSAY WRITING 28/02/2017 11:10 to 12:50II Sem SPOTTING ERRORS 14/03/2018 11:10 to 12:50
SENTENCE COMPLETION 7/3/2017 11:10 to 12:50
GENERAL ENGLISH THEME DETECTION 20/12/2017 11:10 to 12:50
Module 2 BUSINESS LETTER ETIQUITTEE 31/01/2017 13:40 to 15:20
IIIB.Tech EMAIL WRITING 14/02/2017 13:40 to 15:20CSE-B ESSAY WRITING 28/02/2017 13:40 to 15:20II Sem SPOTTING ERRORS 14/03/2018 13:40 to 15:20
SENTENCE COMPLETION 7/3/2017 13:40 to 15:20
GENERAL ENGLISH THEME DETECTION 12/21/2017 11:10 to 12:50
Module 2 BUSINESS LETTER ETIQUITTEE 31/01/2017 11:10 to 12:50
IIIB.Tech EMAIL WRITING 2/15/2017 11:10 to 12:50CSE-C ESSAY WRITING 30/02/2017 11:10 to 12:50II Sem SPOTTING ERRORS 3/16/2018 11:10 to 12:50
SENTENCE COMPLETION 4/5/2017 11:10 to 12:50
GENERAL ENGLISH THEME DETECTION 12/22/2017 14:30 to 16:10
Module 2 BUSINESS LETTER ETIQUITTEE 2/1/2017 14:30 to 16:10
IIIB.Tech EMAIL WRITING 2/16/2017 14:30 to 16:10IT ESSAY WRITING 2/28/2017 14:30 to 16:10
II Sem SPOTTING ERRORS 3/17/2018 14:30 to 16:10 SENTENCE
COMPLETION 4/6/2017 14:30 to 16:10
ENGLISH ARTICLES 20-09-17 10.5 to 11.00 (B.Tech-IT-I-I
Sem) TENSES 5/10/2017
PARAGRAPH WRITING 21-10-17
PREPOSITIONS 1/11/2017GERENDS AND
INFINITIVES 5/11/2017
ENGLISH ARTICLES 17-09-17 11.00 to 11.50(B.Tech-CSE-B I-
I Sem) TENSES 5/10/2017
PARAGRAPH WRITING 21-10-17
PREPOSITIONS 4/11/2017GERENDS AND
INFINITIVES 5/11/2017
ENGLISH VOICE AND REPORTED SPEECH 7/1/2018 2.30 to 3.20
(B.Tech-CSE-B I-II Sem
SITUATIONAL DIALOGUES 6/2/2018
NOTE TAKING AND NOTE MAKING 22-02-18
READING SKILLS 15-03-18REVIEWING AN
ARTICLE 21-03-18
TENSES 5/10/2017
D-Block / COMPUTER
SCIENCE
FF-09B-Block /
Information Technology
217 Mr.K.Prakasam
FF 16 B-Block / IT dept.
FF 9
D-Block/Computer
science Engineering
FF 9
D-Block/Computer
science Engineering
FF-13 & COMMUNICATION Engineering
SF-11D-Block /
COMPUTER SCIENCE
SF-13D-Block /
COMPUTER SCIENCE
SF14
PARAGRAPH WRITING 21-10-17
PREPOSITIONS 4/11/2017GERENDS AND
INFINITIVES 5/11/2017
ENGLISH VOICE AND REPORTED SPEECH 7/1/2018 3.20 to 4.10
(B.Tech-CE-B I-II Sem
SITUATIONAL DIALOGUES 6/2/2018
NOTE TAKING AND NOTE MAKING 22-02-18
READING SKILLS 15-03-18REVIEWING AN
ARTICLE 21-03-18
ENGLISH ARTICLES 18-09-17 9.15 to 10.05 (B.Tech-EEE-A
I-I Sem)
“
“
“
“ENGLISH ARTICLES 18-09-17 10.05 to 11.00
(B.Tech-ECE-C I-I Sem)
“
“
“
“
ENGLISH VOICE AND REPORTED SPEECH 8/1/2018 12.50 to 1.40
(B.Tech-ECE-C I-II Sem
“
“
“
“VOICE AND
REPORTED SPEECH 9/1/2018 02.30 to 3.20
“
ENGLISH(B.Tech-ECE-B
I-II Sem “
“
“ENGLISH- Articles 9/1/2018 2.30 to 4.10
(B.Tech I-II Sem) Tenses 18-01-18
Mech-A Paragraph writing 23-01-18Prepositions 27-01-18
Gerunds 30-01-18ENGLISH- Infinitives 1/2/2018
(B.Tech I-II Sem) Voice and Reported speech 10/2/2018
Situational Dialogues 3/3/2018
219 V.Tulasirao FF 27E-Block /
Mechanical Engineering
2/11/2017
GERENDS AND INFINITIVES 7/11/2017
SF-16
A-Block/ ELOCTRONICS
AND COMMUNICAT
ING ENGINEERING
SITUATIONAL DIALOGUES 5/2/2018
NOTE TAKING AND NOTE MAKING 21-02-18
READING SKILLS 14-03-18
REVIEWING AN ARTICLE 23-03-18
SF-17
A-Block/ ELOCTRONICS
AND COMMUNICAT
ING ENGINEERING
SITUATIONAL DIALOGUES 9/2/2018
NOTE TAKING AND NOTE MAKING 28-02-18
READING SKILLS 20-03-18
REVIEWING AN ARTICLE 31-03-18
SF 16E-Block/CIVIL
Engineering
218 N.Murali
FF09
C-Block / ELECTRICAL
AND ELOCTRONICS ENGINEERING
TENSES 3/10/2017
PARAGRAPH WRITING 23-10-17
PREPOSITIONS 1/11/2017
GERENDS AND INFINITIVES 6/11/2017
SF 16
A-Block/ ELOCTRONICS
AND COMMUNICAT
ING ENGINEERING
TENSES 4/10/2017
PARAGRAPH WRITING 23-10-17
PREPOSITIONS
Note taking 15-3-2018 Note Making 27-3-2018Reading Skills 7/4/2018
Reviewing an article 20-4-2018Phonetics 23.08.17 9:15 to 11:50
Audio & Video Clips 14.09.17 9:15 to 11:50Dialogues 25.10.17 9:15 to 11:50
Reading SQ3R 02.11.17 9:15 to 11:50Data interpretation 22.11.17 9:15 to 11:50
Correction Of Sentenses 3/2/2018 12.15 to 1.40
Acceptence And Rejection Of Invitation 9/2/2018 10.05 to 11.50
Note Taking And Note Making 1/3/2018 9.15 to 10.05
Intensive Reading And Extensive Reading 17-03-18 12.15 to 1.40
Paragraphing And Reviewing 3/4/2018 2.30 to 03.20
Correction Of Sentenses 2/2/2018 12.50 t0 to 1.40
Acceptence And Rejection Of Invitation 9/2/2018 12.50 t0 to 1.40
Note Taking And Note Making 2/3/2018 12.50 t0 to 1.40
Intensive Reading And Extensive Reading 14-03-18 10.05 to 11.00
Paragraphing And Reviewing 6/4/2018 12.50 t0 to 1.40
10.05 to11
Verbs And Tenses 5/9/2017 12.50 to 02.2010.05 to
11Formal Letter Writing And E-Mail Writing 12/10/2017 09.15 to 10.05
10.05 to11
EM-I 10.05(B.Tech I-I Sem) to 12.00
Solutions of Complementary
functions23-09-17 12.50 to 1.40
Solutions of Particular Integrals 25-09-17 2.30 to 3.20
Introduction to Multiple Integrals: Double Integrals &
Triple Integrals
30-10-18 2.30 to 3.20
EM-II Newton Raphson Method 19 -01-18 10.05 to 10.55
(B.Tech I-II Sem) Runga-Kutta method 17-02-18 01.40 to 3.20
Solutions of ODE by Laplace
transformations24-03-18 12.50 to 1.40
11.1to 12.00
One dimensional Wave equation 23-04-18 12.50 to 1.40
EM-I 9.15(B.Tech I-I
Sem/Section-C) to 10.05
Solutions of Complementary
functions22-09-17 11.00 to 1 1.50
222 Dr.G.Vasanti
Introduction to 2nd & higher order linear
22-09-17
FF-10
D-Block / Computer Science
Engineering
Introduction to Fourier series 28-03-18
Introduction to 2nd & higher order linear
Differential equations21-09-17
220 RAMBABU V BECS LAB
COMMUNICAT
ION LAB
A-Block / English Lab
221 N.Shialaja
ECP FF-10
C-Block / EEE DepartmentECP FF-9
ENG-1
Articals And Quantifiers 23-8-17
FF-10Noun, Pronoun And
Adjectives 20-9-17
Sentenses And Structure Of Sentenses 26-10-17
Solutions of Particular Integrals 25-09-17 10.05 to 11.00
Introduction to Multiple Integrals: Double Integrals &
Triple Integrals
1/11/2017 9.15 to 10.05
EM-II Newton Raphson Method 18-01-18 9.15 to 10.05
(B.Tech I-II Sem/section-C) Runga-Kutta method 21-02-18 11.00 to 11.50
Solutions of ODE by Laplace
transformations16-03-18 12.500 to 1.40
Introduction to Fourier series 21-03-18 1.40 to 2.30
One dimensional Wave equation 25-04-18 9.15 to 10.05
10.05to 11.00
Laurent’s Series 25-09-17 11.00 to 1 1.50Residue Theorm 10/10/2017 10.05 to 11.00Bay’s Theorem 22 -10-17 9.15 to 10.05
Test of Hypothesis 13-11-17 1.40 to 2.30Newton Raphson
Method 20-01-18 10.05 to 11.00
Runga-Kutta method 22-02-18 1.40 to 2.30Solutions of ODE by
Laplace transformations
24-03-18 10.05 to 11.00
Introduction to Fourier series 29-03-18 1.40 to 2.30
One dimensional Wave equation 22-04-18 11.00 to 11.50
Newton Raphson Method 25-01-18 12.50 t0 to 1.40
Runga-Kutta method 22-02-18 9.15 to 10.05Solutions of ODE by
Laplace transformations
22-03-18 2.30 to 3.20
Introduction to Fourier series 24-03-18 2.30 to 3.20
One dimensional Wave equation 26-04-18 11.00 to 11.50
I-I.B.TechIntroduction to 2nd & higher order Linear
Differential equations12/9/2017 11.00 to 11.50
EM-ISolutions of
Complementary functions
14-09-17 12.50 to 1.40
CSE-A Solution of Particular Integral 16-09-17 11.00 to 11.50
Introduction to Multiple Integrals,
Double Integrals27-10-17 10.05 TO 10.55
I-I.B.TechSolutions of
Complementary functions
12/9/2017 1.40 to 2.30
EM-I Solution of Particular Integral 14-09-17 1.40 to 2.30
CSE-CIntroduction to
Multiple Integrals, Double Integrals
27-10-17 2.30 TO 3.20
224 Dr. M.V.Ratnamani
EM-II SF-10
E-Block / CIVIL Department
EM-II SF-15
FF-11 D-Block / CSE Department
Introduction to 2nd & higher order Linear
Differential equations10/9/2017 1.40 to 2.30
FF-09 D-Block / CSE Department
223 Dr.R.Santhi Kumar
SF-14
A-Block / Electronics and Communication
Engineering
CVSM/B.Tech –I -II
Cauchy’s Riemann Equations 15-09-17
FF-15E-Block /
Mechanica lEngineering
Introduction to 2nd & higher order Linear
Differential equations10/9/2017 2.30 TO 3.20
I-I.B.TechSolutions of
Complementary functions
12/9/2017 12.50 to 1.40
EM-I Solution of Particular Integral 13-09-17 11.00 to 11.50
ECE-AIntroduction to
Multiple Integrals, Double Integrals
27-10-17 12.50 to 1.40
Newton Raphson Method 10/1/2018 10.05 to 10.55
Runga-Kutta method 22-02-18 11.00 to 11.50
I-II.B.TechSolutions of ODE by
Laplace transformations
22-03-18 11.00 to 11.50
EM-II Introduction to Fourier series 27-03-18 12.50 to 1.40
CSE-A One dimensional Wave equation 19-04-18 9.15 to 10.05
Runga-Kutta method 19-02-18 1.40 to 2.30
I-II.B.TechSolutions of ODE by
Laplace transformations
21-03-18 11.00 to 11.50
EM-II Introduction to Fourier series 24-03-18 1.40 to 2.30
CSE-C One dimensional Wave equation 22-04-18 12.50 to 1.40
Newton Raphson Method 18-01-18 12.50 to 1.40
Runga-Kutta method 21-02-18 1.40 to 2.30
I-II.B.TechSolutions of ODE by
Laplace transformations
21-03-18 1.40 to 2.30
EM-II Introduction to Fourier series 23-03-18 12.50 to 1.40
ECE-A One dimensional Wave equation 21-04-18 9.15 to 10.05
EM-I Introduction to
Multiple Integrals, Double Integrals
18-09-17 9.00 to 10.05
Solutions of Complementary
functions27-09-17 9.00 to 10.05
Solutions of Particular Integrals 20-10-17 1.40-2.30
3/11/2017
EM-I Introduction to
Multiple Integrals, Double Integrals
30-08-17 1:40 to 2:30
(B.Tech I-I Sem)Mech-A
Solutions of Complementary
functions1/9/2017 1:40 to 2:30
Problems on Complementary
functions4/9/2017 12:50 to 1:40
226K.P.S. Suryanarayana+B5174 FF-08 B-Block / IT Department(B.Tech I-I
Sem/Section-B) Introduction to Multiple Integrals: Double Integrals &
Triple Integrals
1.40-2.30
FF 25
Introduction to Linear Differential equations 31-08-17 2:30 to 3:20
225 K.LAKSHMI
SF-16 A-Block / ECE Department
SF-11 D-Block / CSE Department
Newton Raphson Method 12/1/2018 9.15 to 10.05
FF-09 D-Block / CSE Department
SF-16 A-Block / ECE Department
Introduction to Particular Integral 26-10-17 1:40 to 2:30
EM-I Introduction to
Multiple Integrals, Double Integrals
30-08-17 2:30 to 3:20
(B.Tech I-I Sem)Mech-B
Solutions of Complementary
functions1/9/2017 2:30 to 3:20
Problems on Complementary
functions4/9/2017 3:20 to 4:10
Introduction to Particular Integral 26-10-17 1:40 to 2:30
EM-II (B.Tech I-III
Sem)Mech-A
Laplace transforms of functions using
Shifting Theorems24-2-2018 12:50 to 1:40
Inverse Laplace transforms of
functions using Shifting Theorems
13-3-2018 2:30 to 3:20
Problem solving 14-3-2018 3:20 to 4:10 InverseLaplace transforms using
Convolution theorem15-3-2018 1:40 to 2:30
EM-II Laplace transforms of standard functions 23-2-2018 1:40 to 2:30
(B.Tech I-II Sem)Laplace transforms of
functions using Shifting Theorems
24-2-2018 1:40 to 2:30
Mech-B
Inverse Laplace transforms of
functions using Shifting Theorems
13-3-2018 2:30 to 3:20
Problem solving 14-3-2018 1:40 to 2:30 Inverse Laplace transforms using
Convolution theorem15-3-2018 12:50 to 1:40
Problem solving 16-3-2018Solution of ordinary differential equations
using Laplace transforms.
17-3-2018
EM-I (B.Tech I-I Sem/Section-B)
Introduction to Multiple Integrals,
Double Integrals21-09-17 11.00 to 11.50
Solutions of Complementary
functions22-09-17 3.20-4.10
Solutions of Particular Integrals 24-10-17 2.30-3.20
Introduction to Multiple Integrals: Double Integrals &
Triple Integrals
2/11/2017 11.00 to 11.50
Introduction to Multiple Integrals,
Double Integrals17-09-17 10.05-11.00
Solutions of Complementary
functions25-09-17 2.30. to 3.20
228 B.VENKATARAO
FF-13 A-Block / ECE Department
EM-I FF-09 C-Block / EEE
227 T.Viswanadham
E-Block /Mechanical Engineering
FF 27
Introduction to Linear Differential equations 31-08-17 12:50 to 1:40
Laplace transforms of standard functions 23-2-2018 2:30 to 3:20
FF 25
E-Block /Mechanical Engineering
FF 27
1:40 to 2:30
Solutions of Particular Integrals 12/10/2017 10.05 to11.00
Introduction to Multiple Integrals: Double Integrals &
Triple Integrals
29-10-17 10.05-11.00
10.05to 11.00
Laurent’s Series 25-09-17 11.00 to 1 1.50Residue Theorm 10/10/2017 10.05 to 11.00Bay’s Theorem 22 -10-17 9.15 to 10.05
Test of Hypothesis 13-11-17 1.40 to 2.30Laplace transforms of
standard functions 23-2-2018 2:30 to 3:20
Laplace transforms of functions using
Shifting Theorems24-2-2018 12:50 to 1:40
Inverse Laplace transforms of
functions using Shifting Theorems
13-3-2018 2:30 to 3:20
Problem solving 14-3-2018 3:20 to 4:10 InverseLaplace transforms using
Convolution theorem15-3-2018 1:40 to 2:30
EM-II Laplace transforms of standard functions 23-2-2018 1:40 to 2:30
(B.Tech I-II Sem)
EEE-B
Inverse Laplace transforms of
functions using Shifting Theorems
13-3-2018 2:30 to 3:20
Problem solving 14-3-2018 1:40 to 2:30 Inverse Laplace transforms using
Convolution theorem15-3-2018 12:50 to 1:40
Problem solving 16-3-2018Solution of ordinary differential equations
using Laplace transforms.
17-3-2018
Newton Raphson Method 12/1/2018 9.15 to 10.05
Runga-Kutta method 19-02-18 1.40 to 2.30Solutions of ODE by
Laplace transformations
21-03-18 11.00 to 11.50
Introduction to Fourier series 24-03-18 1.40 to 2.30
One dimensional Wave equation 22-04-18 12.50 to 1.40
Introduction to Multiple Integrals,
Double Integrals17-09-17 10.05-11.00
Solutions of Complementary
functions25-09-17 2.30. to 3.20
Solutions of Particular Integrals 12/10/2017 10.05 to11.00
Introduction to Multiple Integrals: Double Integrals &
Triple Integrals
29-10-17 10.05-11.00
230 M.SANTHI
EM-II FF-10 C-Block / EEE Department
EM-I FF-09E-Block /
MECHANICAL Department
Basic concepts of
EM-I FF-09 Department
CVS/B.Tech –I -II
Cauchy’s Riemann Equations 15-09-17
FF-15E-Block /
Mechanica lEngineering
229 V.Vinod kumar
EM-II (B.Tech I-III Sem) EEE-A FF -09
C-Block /Electrical and
Electronics Engineering
FF -10
Laplace transforms of functions using
Shifting Theorems24-2-2018 1:40 to 2:30
1:40 to 2:30
Organizational Structures and its
merits and demerits24-11-17 09.15 to 10.05
Definition of plant layout and types 25-11-17 03.20 to 04.10
ABC analysis and VED Analysis 14-03-18 09.15 to 10.05
14 Principles of TQM And Quality Circles 17-03-18 1.40 to 03.20
Basic concepts of Organization and its
structures23-11-17 3.20 to 4.10
Organizational Structures and its
merits and demerits24-11-17 09.15 to 10.05
Definition of plant layout and types 27-11-17 03.20 to 04.10
ABC analysis and VED Analysis 16-03-18 09.15 to 10.05
14 Principles of TQM And Quality Circles 19-03-18 1.40 to 03.20
Introduction to Multiple Integrals,
Double Integrals17-09-17 12.50-1.40
Solutions of Complementary
functions25-09-17 11.00-1150
Solutions of Particular Integrals 12/10/2017 12.50-1.40
Introduction to Multiple Integrals: Double Integrals &
Triple Integrals
29-10-17 10.05-11.00
Managerial Economics definition and
Introduction to some topics and nature
28-11-17 10.05 to 10.55
Scope of ME, Intorduction to demand 5/12/2017 10.05 to 10.55
Determimnants of demand, Lwa of demand and its
exceptions
14-12-17 10.05 to 10.55
Introduction to Accounting 6/3/2018 10.05 to 10.55
Double Enry System Journal and Ledger 13-03-18 10.05 to 10.55
Introduction to Multiple Integrals,
Double Integrals21-09-17 10.05-11.00
Solutions of Complementary
functions22-09-17 2.30-3.20
Solutions of Particular Integrals 24-10-17 1.40-2.30
Introduction to Multiple Integrals: Double Integrals &
Triple Integrals
2/11/2017 11.00 to 11.50
Newton Raphson Method 19-01-18 2.30-3.20
Runga-Kutta method 20-02-18 12.50 to 1.40Solutions of ODE by
Laplace transformations
19-03-18 9.15 to 10.05
233 T.V.UDAYBABU EM-I FF-09 C-Block / EEE Department
234 N. SaibabuMEFA
(B.Tech II-ISem) E-Block FF-18
Mechanical Engineering/
235 K. RAMYA EM-I (B.Tech I-I Sem/Section-A) FF-09 C-Block / EEE
Department
EM-II FF-09
231 H UdayBhaskarIEM
(B.Tech III-II Sem)
Organization and its structures
22-11-17 3.20 to 4.10
FF-07 E-Block
232 N.A.N.RAJU IEM (B.Tech III-II Sem) FF-07 E-Block
Introduction to Fourier series 20-03-18 9.15 to 10.05
One dimensional Wave equation 25-04-18 12.50 to 1.40
Newton Raphson Method 20-01-18 11-11.50
Runga-Kutta method 17-02-18 11-11.50Solutions of ODE by
Laplace transformations
21-03-18 11-11.50
Introduction to Fourier series 28-03-18 3.20-4.10
One dimensional Wave equation 25-04-18 3.20-4.10
Managerial Economics definition and
Introduction to some topics and nature
20-11-17 9:15 to 10:15
Scope of ME, Intorduction to demand 23-11-17 10:05 to 10:55
Determimnants of demand, Lwa of demand and its
exceptions
25-11-17 11:10 to 12:00
Recruitment , selection,T&D 12:00 to 12:50
Diffrences wages system.salary&
compensation, job evaluation etc..
14-03-18 12:00 to 12:50
Managerial Economics definition and
Introduction to some topics and nature
20-11-17 11.10 to 12.00
Scope of ME, Intorduction to demand 21-11-17 12.00 to 12.50
Determimnants of demand, Lwa of demand and its
exceptions
23-11-17 1:40 to 2.30
Recruitment , selection,T&D 13-03-18 12.00 to 12.50
Differences wages 14-03-18 09.15 to 10.05
Engineering Physics
Introduction to Interference of light 11/8/2017 2.30 to 03.20
(B.Tech I-I Sem) Characteristics of Laser 31-08-2017 09.15-10.05
CSE-A Light ray propagation through optical fiber 11/9/2017 12.50 to 1.40
Introduction to Quantum mechanics 25-09-2017 09.15 to 10.05
Introduction to Magnetic properties 23-10-2017 09.15to 10.05
Engineering Physics
Introduction to Interference of light 17-08-2017 10.05 to 10.55
(B.Tech I-ISem) Light ray propagation through optical fiber 7/9/2017 2.30 to 3.20
CSE-B Characteristics of Laser 19-09-2017 2.30 to 3.20
Introduction to Quantum mechanics 5/10/2017 2.30 to 3.20
Introduction to Magnetic properties 27-10-2017 1.40 to2.30
Engineering Physics
Introduction to Interference of light 8/1/2018 12.50 to 1.40
237 K.Madhavi
MEMS (B.Tech III-II Sem) EEE-
ASF-16
C- block / Electrical and
Electronics Engineering
MEMS (B.Tech III-II Sem) ECE-C
C- block SF-18
system.salary& compensation, job 16-03-18 2:30 to 3:20
238 K.Ravi Kumar
FF-09
D-Block/CSE
FF-10
236 B.Lakshmana Rao C-Block / EEE
EM-II FF-10
(B.Tech I-IISem) Characteristics of Laser 22-01-2018 12.50-1.40
CIVIL-B Light ray propagation through optical fiber 8/2/2018 3.20 to 4.10
Introduction to Quantum mechanics 17-02-2018 9.15 to 10.05
Introduction to Magnetic properties 12/3/2018 12.50 to 1.40
Engineering Physics
Introduction to Interference of light 8/1/2018 12.50 to 1.40
(B.Tech I-II Sem) Characteristics of Laser 22-01-2018 12.50-1.40
Mech-A Light ray propagation through optical fiber 8/2/2018 3.20 to 4.10
Introduction to Quantum mechanics 17-02-2018 9.15 to 10.05
Introduction to Magnetic properties 12/3/2018 12.50 to 1.40
Engineering Physics
Introduction to Interference of light 17-08-2017 10.05 to 10.55
(B.Tech I-II Sem) Characteristics of Laser 7/9/2017 2.30 to 3.20
Mech-B Light ray propagation through optical fiber 19-09-2017 2.30 to 3.20
Introduction to Quantum mechanics 5/10/2017 2.30 to 3.20
Introduction to Magnetic properties 27-10-2017 1.40 to2.30
Phonetics 22.08.17 1:40 to 4:10Audio & Video Clips 05.09.17 1:40 to 4:10
Dialogues 27.09.17 1:40 to 4:10Reading SQ3R 11.10.17 1:40 to 4:10
Data interpretation 24.10.17 1:40 to 4:10Engineering
PhysicsIntroduction to
Interference of light 11/8/2017 2.30 to 03.20
(B.Tech I-I Sem) Characteristics of Laser 31-08-2017 09.15-10.05
ECE-C Light ray propagation through optical fiber 11/9/2017 12.50 to 1.40
Introduction to Quantum mechanics 25-09-2017 09.15 to 10.05
Introduction to Magnetic properties 23-10-2017 09.15to 10.05
Engineering Physics
Introduction to Interference of light 17-08-2017 10.05 to 10.55
(B.Tech I-ISem) Light ray propagation through optical fiber 7/9/2017 2.30 to 3.20
CSE-C Characteristics of Laser 19-09-2017 2.30 to 3.20
Introduction to Quantum mechanics 5/10/2017 2.30 to 3.20
Introduction to Magnetic properties 27-10-2017 1.40 to2.30
Introduction to Interference of light 8/1/2018 12.50 to 1.40
Characteristics of Laser 22-01-2018 12.50-1.40
Light ray propagation through optical fiber 8/2/2018 3.20 to 4.10
Introduction to Quantum mechanics 17-02-2018 9.15 to 10.05
Introduction to Magnetic properties 12/3/2018 12.50 to 1.40
Engineering Physics
Introduction to Interference of light 11/8/2017 2.30 to 03.20
(B.Tech I-I Sem) Characteristics of Laser 31-08-2017 09.15-10.05
239 Dr.K.Sowri babu
FF-26
E-Block/ Mechanical Engineering
FF-24
240 D.Yasodha BECS LAB
COMMUNICAT
ION LAB
A-Block / English Lab
241 P.Suresh patnaik
SF-18 A-Block/ECE
FF-11 D-Block/CSE
FF-09 C-Block/EEE
SF-13 E-Block/CIVIL
ECE-A Light ray propagation through optical fiber 11/9/2017 12.50 to 1.40
Introduction to Quantum mechanics 25-09-2017 09.15 to 10.05
Introduction to Magnetic properties 23-10-2017 09.15to 10.05
Engineering Physics
Introduction to Interference of light 17-08-2017 10.05 to 10.55
(B.Tech Light ray propagation through optical fiber 7/9/2017 2.30 to 3.20
I-ISem) Characteristics of Laser 19-09-2017 2.30 to 3.20
ECE-B Introduction to Quantum mechanics 5/10/2017 2.30 to 3.20
Introduction to Magnetic properties 27-10-2017 1.40 to2.30
Engineering Physics
Introduction to Interference of light 8/1/2018 12.50 to 1.40
(B.Tech I-IISem) Characteristics of Laser 22-01-2018 12.50-1.40
CIVIL-A Light ray propagation through optical fiber 8/2/2018 3.20 to 4.10
Introduction to Quantum mechanics 17-02-2018 9.15 to 10.05
Introduction to Magnetic properties 12/3/2018 12.50 to 1.40
Engineering Physics Lab
Newton’s Rings Experiment
Demonstration 20-01-2018 9.15 to 10.05
(B.Tech I-II Sem)Optical fiber Experiment
Demonstration 20-01-2018 10.05 to 11.00
EEE-AEnergy Band Gap
Experiment Demonstration
20-01-2018 11.00 to 11.50
Engineering Physics Lab
Newton’s Rings Experiment
Demonstration 8/1/2018 1.40 to 2.30
(B.Tech I-II Sem)Optical fiber Experiment
Demonstration 8/1/2018 2.30 to 3.20
EEE-BEnergy Band Gap
Experiment Demonstration
8/1/2018 3.20 to 4.10
Engineering Physics Lab
Newton’s Rings Experiment
Demonstration 2/1/2018 1.40 to 2.30
(B.Tech I-II Sem)Optical fiber Experiment
Demonstration 2/1/2018 2.30 to 3.20
EEE-AEnergy Band Gap
Experiment Demonstration
2/1/2018 3.20 to 4.10
Engineering Physics Lab
Newton’s Rings Experiment
Demonstration 3/1/2018 1.40 to 2.30
(B.Tech I-II Sem)Optical fiber Experiment
Demonstration 3/1/2018 2.30 to 3.20
EEE-BEnergy Band Gap
Experiment Demonstration
3/1/2018 3.20 to 4.10
Engg.Physics
(B.Tech I-II Sem) 19-01-2018
EEE-B
Introduction to Phenomenon of
interference 12.50 to 1.40
C-Block / Characteristics of Laser 1.40 to 2.30
242 N. Nageswararao
SF-16
A-Block/ECE
SF-17
SF-10 E-Block/CIVIL
243 K.Sreedhar
SF-24E-Block/
Engg.Physics Lab-I
SF-24E-Block/
Engg.Physics Lab-I
SF-25E-Block/
Engg.Physics Lab-I
SF-25E-Block/
Engg.Physics Lab-I
03-02-2018
27-02-2018
24-03-2018
Engg.Physics (B.Tech I-I Sem) 15-09-2017
IT 07-10-2017
21-10-2017
26-10-2017
9/11/2017
Engineering Chemistry
Renewable and Non-Renewable energy
sources6/11/2017 01:40 to 02:30
(B.Tech I-I Sem) 12:50 toEEE-B 1:40
Construction and Working of PV Cell 9/11/2017 10:05 to 11:00
Solar Power Plants 10/11/2017 01:40 to 02:30Green House effect 13-11-2017 01:40 to 02:30
Engineering Chemistry 11:00 to
(B.Tech I-II Sem) 11:50
ECE-B 12:50 to1:40
12:50 to1:40
12:50 to1:40
12:50 to1:40
Engineering Chemistry
Moulding of plastics into Articles
(Compression, injection)
11/9/2017 03:20 to 04:10
(B.Tech I-I Sem) 10:05 toME-B 11:00
Cathodic Protection (Sacrificial Anodic
Method)23-10-2017 03:20 to 04:10
Manufacturing Of Synthetic Petrol
(Fischer-Tropschs Method)
28-10-2017 02:30 to 03:20
12:50 to1:40
Engineering Chemistry 09:15 to
(B.Tech I-II Sem) 10:05
ECE-A 09:15 to10:05
10:05 to11:00
10:05 to11:00
12:50 to1:40
246 Dr. Ramanaiah Malla
FF-25E-Block/
Mechanical Engineering
Industrial Water Treatments- 21-09-2017
Solar tower 29-11-2017
Moulding of plastics into Articles (transfer
and extrusion moulding methods)
25-01-2018
SF-16 A-Block/ECE
Industrial Water Treatments- 15-02-2018
Cathodic Protection (Impressed Current 17-03-2018
Manufacturing Of Synthetic Petrol 24-03-2018
photo voltaic cells 22-04-2018
245 S.V.Maruti Prasad
FF-10C-Block/ Electrical
Engineering
Harnessing of Solar Energy 8/11/2017
Moulding of plastics into articles 27-01-2018
SF-13
A-Block/Electrical And Electronics
Engineering
Moulding of plastics into articles 31-01-2018
Cathodic Protection 19-03-2018
Solar energy – Harnessing – Solar 2/4/2018
Working of PV Cell and Green House 4/4/2018
244 B.G.V.S. ROSHAN
FF 10
C-Block / Electronics and
Electrical Engineering
Characteristics of Laser 1.40 to 2.30
Introduction to Optical fiber 17-02-18 1.40 to 2.30
Introduction to Quantum mechanics 1.40 to 2.30
Introduction to magnetic properties 1.40 to 2.30
Introduction to Phenomenon of 9.15 to 10.05
FF 2B-Block /
Information technologyCharacteristics of Laser 12.50 to 1.40
Introduction to Optical fiber 12.50 to 1.40
Introduction to Quantum mechanics 12.50 to 1.40
Introduction to magnetic properties 12.50 to 1.40
Introduction to Environmental Studies, Forest
Resources.
31-08-17 9.15 to 10.05
Water Resources: Uses. Water
Resources: Dams +ve and –ve Impacts
2/9/2017 11.00 to 11.50
Mineral Resources: Uses, Effects 5/9/2017 9.15 to 10.05
Food Resources: Food Security 7/9/2017 11.00 to 11.50
Energy Resources: Non-Renewable. 12/9/2017 9.15 to 10.05
Energy Resources: Renewable 16-09-17 9.15 to 10.05
Ecosystems: Structure 19-09-17 1.40 to 2.30Ecosystems: Functions 20-09-17 12.50 to 1.40Ecological Succession 23-09-17 2.30 to 3.20
Bio-geographical Classification of India and India as a Mega
Diversity Nation
26-09-17 1.40 to 2.30
Hot Spots of India and Endangered and
Endemic Species of India
4/10/2017 10.05 to 11.50
Air Pollution Effects and Control Methods. 6/10/2017 1.40 to 2.30
Water Pollution Causes and Effects 11/10/2017 1.40 to 2.30
Marine Pollution 17-10-17 1.40 to 2.30Nuclear Hazards 18-10-17 1.40 to 2.30
Solid Waste Management 20-10-17 1.40 to 2.30
Disaster Management. 22-10-17 1.40 to 2.30Social Issues:
Unsustainable and Sustainable Development
24-10-17 1.40 to 2.30
Water Conservation: RWH and WSM. 26-10-17 1.40 to 2.30
R and R Issues, Case Study. 28-10-17 1.40 to 2.30
Global Environmental Challenges 1/11/2017 1.40 to 2.30
Bioremediation and Carbon Sequestration. 2/11/2017 1.40 to 2.30
Environmental Acts. 3/11/2017 1.40 to 2.30Population Growth
Patterns. 5/11/2017 1.40 to 2.30
Population Problems and Control. 6/11/2017 1.40 to 2.30
Environment and Human Health. 7/11/2017 1.40 to 2.30Introduction to Environmental Studies, Forest
Resources.
30-08-17 9.15 to 10.05
Water Resources: Uses. Water
Resources: Dams +ve and –ve Impacts
1/9/2017 11.00 to 11.50
Mineral Resources: Uses, Effects 3/9/2017 9.15 to 10.05
Food Resources: Food Security 6/9/2017 11.00 to 11.50
Energy Resources: Non-Renewable. 11/9/2017 9.15 to 10.05
247 I.SUDHAKAR
I-ECE-A SF-13 A-Block / ECE
I-ECE-B SF-14 A-Block / ECE
Energy Resources: Renewable 15-09-17 9.15 to 10.05
Ecosystems: Structure 17-09-17 1.40 to 2.30Ecosystems: Functions 19-09-17 12.50 to 1.40Ecological Succession 22-09-17 2.30 to 3.20
Bio-geographical Classification of India and India as a Mega
Diversity Nation
25-09-17 1.40 to 2.30
Hot Spots of India and Endangered and
Endemic Species of India
3/10/2017 10.05 to 11.50
Engineering Chemistry Moulding of plastics 8/9/2017 1.40 to 2.30
(B.Tech I-I Sem) Theories of corrosion 16-10-2017 2.30-3.20CE-A Cathodic protection 26-10-2017 10.05 to 10.55
Manufacturing of synthetic petrol 27-10-2017 12.50 to 1.40
Photo voltaic cells 20-11-2017 12.50 to 1.40Engineering Chemistry Moulding of plastics 27-01-2018 10.05 to 10.55
(B.Tech I-II Sem) Theories of corrosion 28-02-2018 1.40 to 2.30
ECE-C Cathodic protection 24-03-2018 9.15 to 10.05Manufacturing of
synthetic petrol 29-03-2018 10.05 to 10.55
Photo voltaic cells 30-04-2018 12.50 to 1.40Concentrated solar
power plants 2/5/2018 12.50 to 1.40
Engineering Chemistry Moulding of plastics 9/9/2017 2.30 to 3.20
(B.Tech I-I Sem) Theories of corrosion 16-10-2017 11.00 to 11.50CE-B Cathodic protection 27-10-2017 10.05 to 10.55
Manufacturing of synthetic petrol 1/11/2017 12.50 to 1.40
Photo voltaic cells 19-11-2017 12.50 to 1.40Engineering Chemistry 09:15 to
(B.Tech I-I Sem) 10:05
MECH-A Harnessing of Solar Energy 30-11-2017 02:30 to 03:20
Construction and Working of PV Cell 1/12/2017 03:20 to 04:10
12:50 to1:40
Green House effect 4/12/2017 02:30 to 03:20 Engineering Chemistry 12:50 to
(B.Tech I-II Sem) 1:40
CSE-C 01:40 to2:30
11:00 to11:50
11:00 to11:50
12:50 to1:40
Engineering Chemistry 12:50 to
(B.Tech I-II Sem) 1:40
IT 01:40 to2:30
01:40 to2:30
Solar energy – Harnessing – Solar 23-04-2018
Working of PV Cell and Green House 25-04-2018
Moulding of plastics into articles 22-01-2018
FF-11B-Block/
Information Technology
Moulding of plastics into articles 22-01-2018
Cathodic Protection 12/3/2018
I-ECE-B SF-14 A-Block / ECE
248 J.Sureshkumar
SF 09 E Block/civil engineering
SF 14
A-Block/Electrical And Electronics
Engineering
SF 11 E Block/civil engineering
249 A.Udayasri
Renewable and Non-Renewable energy
sources28-11-2017
FF-26E-Block/
Mechanical engineering
Solar Power Plants 2/12/2017
Moulding of plastics into articles 24-01-2018
FF-09D-Block/ computer
Engineering
Moulding of plastics into articles 24-01-2018
Cathodic Protection 19-03-2018
01:40 to2:30
09:15 to10:05
Engineering Chemistry
Moulding of plastics into articles 8/9/2017 11:00 to 11:50
(B.Tech I-I Sem) Moulding of plastics into articles 9/9/2017 09:15 to 10:05
EEE-A Cathodic Protection 18-10-2017 11:00 to 11:5012:50 to
1:4012:50 to
1:40Engineering Chemistry
Moulding of plastics into articles 24-01-2018 01:40 to 02:30
(B.Tech I-II Sem) 12:50 to
CSE-A 1:4012:50 to
1:40Solar energy –
Harnessing – Solar Power Plants
4/4/2018 01:40 to 02:30
12:50 to1:40
Engineering Chemistry 12:50 to
(B.Tech I-II Sem) 1:40
CSE-B 12:50 to1:40
12:50 to1:40
Working of PV Cell and Green House
Effect7/4/2018 01:40 to 02:30
Engineering Chemistry Lab
(B.Tech I-I Sem)
EEE-A
Introduction to Chemistry Lab –
Demonstration of all experiments
23-08-2017 01:40 to 04:10 SF-12
Engineering Chemistry Lab
(B.Tech I-I Sem)
ME-B
Introduction to Chemistry Lab –
Demonstration of all experiments
24-08-2017 01:40 to 04:10 SF-12
Engineering Chemistry Lab
(B.Tech I-II Sem)
ECE-B
Introduction to Chemistry Lab –
Demonstration of all experiments
10/1/2018 01:40 to 04:10 SF-12
Engineering Chemistry Lab
(B.Tech I-I Sem)
ME-A
Introduction to Chemistry Lab –
Demonstration of all experiments
26-08-2017 09:15 to 11:50 SF-13
Engineering Chemistry Lab
252 D. Srihari
Introduction to Chemistry Lab –
Demonstration of all 24-08-2017 09:15 to 11:50 SF-13
E-Block/Engineering Chemistry Lab
Introduction to Chemistry Lab – 9/1/2018 01:40 to 04:10 SF-13
Moulding of plastics into articles 24-01-2018
FF-10
D-Block/ Computer Science
Engineering
Cathodic Protection 19-03-2018
Solar energy – Harnessing – Solar 4/4/2018
251 S.Gowthamsri
Introduction to Chemistry Lab –
Demonstration of all 21-08-2017 01:40 to 04:10 SF-13
E-Block/ Engineering
Chemistry Lab
Introduction to Chemistry Lab –
Demonstration of all 23-08-2017 09:15 to 11:50 SF-13
Introduction to Chemistry Lab –
Demonstration of all experiments
8/1/2018 09:15 to 11:50 SF-13
Solar energy – Harnessing – Solar 16-04-2018
Working of PV Cell and Green House 18-04-2018
250 M. Balakrishna
FF-09C-Block/ Electrical
EngineeringSolar energy – Harnessing – Solar 10/11/2017
Working of PV Cell 13-11-2017
FF-11
D-Block/ Computer Science
Engineering
Moulding of plastics into articles 25-01-2018
Cathodic Protection 5/3/2018
Working of PV Cell and Green House 9/4/2018
(B.Tech I-II Sem)
ECE-C
Introduction to Chemistry Lab –
Demonstration of all experiments
10/1/2018 01:40 to 04:10 SF-13
Fundamental concepts of Organization and its
structures17-11-17 3.20 to 4.10
Merits & Demerits of Organizational
Structures21-11-17 09.15 to 10.05
ABC analysis and VED Analysis 12/3/2018 09.15 to 10.05
14 Principles of TQM And Quality Circles 19-03-18 1.40 to 03.20
GA PERMUTATION&COMB 28-06-17 10:05-10:55
MODULE-2 PROBABILITY 4/7/2017 10:05-10:55(B.Tech III-I
Sem) SI&CI 11/7/2017 10:05-10:55
ECE-A TIME&DISTANCE 18-07-17 10:05-10:55TIME&WORK 25-07-17 10:05-10:55
ALLIGATION AND MIXTURE 8/8/2017 11:10-12:50
SEATING ARRANGMENT,
PUZZLE TEST5/9/2017 11:10-12:50
BLOOD RELATIONS,
SYLLOGSAMS19-09-17 11:10-12:50
D.I & D.S 26-09-17 11:10-12:50NON-VERBAL 3/10/2017 11:10-12:50
GA PERMUTATION&COMB 28-06-17 1:40-2:30
MODULE-2 PROBABILITY 4/7/2017 1:40-2:30(B.Tech III-I
Sem) SI&CI 11/7/2017 1:40-2:30
ECE-B TIME&DISTANCE 18-07-17 1:40-2:30TIME&WORK 25-07-17 1:40-2:30
ALLIGATION AND MIXTURE 1/8/2017 2:30-4:10
SEATING ARRANGMENT,
PUZZLE TEST8/8/2017 2:30-4:10
BLOOD RELATIONS,
SYLLOGSAMS22-08-17 2:30-4:10
D.I & D.S 5/9/2017 2:30-4:10NON-VERBAL 19-09-17 2:30-4:10
GA PERMUTATION&COMB 1/7/2017 10:05-10:55
MODULE-2 PROBABILITY 15-07-17 10:05-10:55(B.Tech III-I
Sem) SI&CI 29-07-17 10:05-10:55
ECE-C TIME&DISTANCE 8/8/2017 10:05-10:55TIME&WORK 16-08-17 10:05-10:55
ALLIGATION AND MIXTURE 23-08-17 11:10-12:50
SEATING ARRANGMENT,
PUZZLE TEST30-08-17 11:10-12:50
BLOOD RELATIONS,
SYLLOGSAMS2/9/2017 11:10-12:50
D.I & D.S 16-09-17 11:10-12:50
Demonstration of all experiments
9/1/2018 01:40 to 04:10 SF-13
253 B.V.G. Murali Krishna IEM (B.Tech III-II Sem) FF-07 E-Block
SF-17
A-Block /Electronics and Communication
engineering
SF-26
A-Block /Electronics and Communication
engineering
FF-18
A-Block /Electronics and Communication
engineering
NON-VERBAL 23-09-17 11:10-12:50
GA PERMUTATION&COMB 3/7/2017 10:05-10:55
MODULE-2 PROBABILITY 10/7/2017 10:05-10:55(B.Tech III-I
Sem) SI&CI 17-07-17 10:05-10:55
CSE-A TIME&DISTANCE 24-07-17 10:05-10:55TIME&WORK 31-07-17 10:05-10:55
ALLIGATION AND MIXTURE 21-08-17 11:10-12:50
SEATING ARRANGMENT,
PUZZLE TEST28-08-17 11:10-12:50
BLOOD RELATIONS,
SYLLOGSAMS11/9/2017 11:10-12:50
D.I & D.S 18-09-17 11:10-12:50NON-VERBAL 25-09-17 11:10-12:50
GA PERMUTATION&COMB 3/7/2017 1:40-2:30
MODULE-2 PROBABILITY 10/7/2017 1:40-2:30(B.Tech III-I
Sem) SI&CI 17-17-17 1:40-2:30
CSE-B TIME&DISTANCE 24-07-17 1:40-2:30TIME&WORK 1/8/2017 1:40-2:30
ALLIGATION AND MIXTURE 11/9/2017 2:30-4:10
SEATING ARRANGMENT,
PUZZLE TEST18-09-17 2:30-4:10
BLOOD RELATIONS,
SYLLOGSAMS25-09-17 2:30-4:10
D.I & D.S 9/10/2017 2:30-4:10NON-VERBAL 16-10-17 2:30-4:10
GA PERMUTATION&COMB 5/7/2017 10:05-10:55
MODULE-2 PROBABILITY 12/7/2017 10:05-10:55(B.Tech III-I
Sem) SI&CI 19-07-17 10:05-10:55
CSE-C TIME&DISTANCE 26-07-17 10:05-10:55TIME&WORK 16-08-17 10:05-10:55
ALLIGATION AND MIXTURE 23-08-17 11:10-12:50
SEATING ARRANGMENT,
PUZZLE TEST6/9/2017 11:10-12:50
BLOOD RELATIONS,
SYLLOGSAMS13-09-17 11:10-12:50
D.I & D.S 20-09-17 11:10-12:50NON-VERBAL 11/10/2017 11:10-12:50
GA PERMUTATION&COMB 30-06-17 1:40-2:30
MODULE-2 PROBABILITY 7/7/2017 1:40-2:30(B.Tech III-I
Sem) SI&CI 14-07-17 1:40-2:30
IT TIME&DISTANCE 18-08-17 1:40-2:30TIME&WORK 8/9/2017 1:40-2:30
ALLIGATION AND MIXTURE 15-09-17 2:30-4:10
SEATING ARRANGMENT,
PUZZLE TEST22-09-17 2:30-4:10
BLOOD RELATIONS,
SYLLOGSAMS6/10/2017 2:30-4:10
SF-17
D-Block /Computer
Science Engineering
SF-19
D-Block /Computer
Science Engineering
SF-20
D-Block /Computer
Science Engineering
FF-11B-Block
/Information Technology
D.I & D.S 15-10-17 2:30-4:10NON-VERBAL 23-10-17 2:30-4:10
GA PERMUTATION&COMB 29-11-17 10:05-10:55
MODULE-2 PROBABILITY 6/12/2017 10:05-10:55(B.Tech III-II
Sem) SI&CI 13-12-17 10:05-10:55
ME-A TIME&DISTANCE 20-12-17 10:05-10:55TIME&WORK 3/1/2018 10:05-10:55
ALLIGATION AND MIXTURE 10/1/2018 11:10-12:50
SEATING ARRANGMENT,
PUZZLE TEST4/1/2018 11:10-12:50
BLOOD RELATIONS,
SYLLOGSAMS7/2/2018 11:10-12:50
D.I & D.S 17-02-18 11:10-12:50NON-VERBAL 7/3/2018 11:10-12:50
GA PERMUTATION&COMB 31-11-17 1:40-2:30
MODULE-2 PROBABILITY 6/12/2017 1:40-2:30(B.Tech III-II
Sem) SI&CI 13-12-17 1:40-2:30
ME-B TIME&DISTANCE 20-12-17 1:40-2:30TIME&WORK 3/1/2018 1:40-2:30
ALLIGATION AND MIXTURE 10/1/2018 2:30-4:10
SEATING ARRANGMENT,
PUZZLE TEST31-01-18 2:30-4:10
BLOOD RELATIONS,
SYLLOGSAMS7/2/2018 2:30-4:10
D.I & D.S 28-02-18 2:30-4:10NON-VERBAL 14-03-18 2:30-4:10
GA PERMUTATION&COMB 1/12/2017 10:05-10:55
MODULE-2 PROBABILITY 8/12/2017 10:05-10:55(B.Tech III-II
Sem) SI&CI 15-12-17 10:05-10:55
CE-A TIME&DISTANCE 22-12-17 10:05-10:55TIME&WORK 5/1/2018 10:05-10:55
ALLIGATION AND MIXTURE 19-01-18 11:10-12:50
SEATING ARRANGMENT,
PUZZLE TEST9/2/2018 11:10-12:50
BLOOD RELATIONS,
SYLLOGSAMS16-02-18 11:10-12:50
D.I & D.S 9/3/2018 11:10-12:50NON-VERBAL 23-03-18 11:10-12:50
GA PERMUTATION&COMB 1/2/2017 1:40-2:30
MODULE-2 PROBABILITY 8/12/2017 1:40-2:30(B.Tech III-II
Sem) SI&CI 15-12-17 1:40-2:30
CE-B TIME&DISTANCE 22-12-17 1:40-2:30TIME&WORK 5/1/2018 1:40-2:30
ALLIGATION AND MIXTURE 19-01-18 2:30-4:10
SEATING ARRANGMENT,
PUZZLE TEST2/2/2018 2:30-4:10
FF-07E-
Block/Mechanical engineering
FF-08E-
Block/Mechanical engineering
SF-17 E-Block/Civil Engineering
SF-18 E-Block/Civil Engineering
254 V.S.P.S.S.Srikanth
BLOOD RELATIONS,
SYLLOGSAMS9/2/2018 2:30-4:10
D.I & D.S 16-02-18 2:30-4:10NON-VERBAL 9/3/2018 2:30-4:10
GA PERMUTATION&COMB 27-11-17 10:05-10:55
MODULE-2 PROBABILITY 4/12/2017 10:05-10:55(B.Tech III-II
Sem) SI&CI 11/12/2017 10:05-10:55
EEE-A TIME&DISTANCE 8/1/2018 10:05-10:55TIME&WORK 22-01-18 10:05-10:55
ALLIGATION AND MIXTURE 29-01-18 11:10-12:50
SEATING ARRANGMENT,
PUZZLE TEST12/2/2018 11:10-12:50
BLOOD RELATIONS,
SYLLOGSAMS19-02-18 11:10-12:50
D.I & D.S 26-02-18 11:10-12:50NON-VERBAL 5/3/2018 11:10-12:50
GA PERMUTATION&COMB 4/12/2017 1:40-2:30
MODULE-2 PROBABILITY 11/12/2017 1:40-2:30(B.Tech III-II
Sem) SI&CI 18-12-17 1:40-2:30
EEE-B TIME&DISTANCE 8/1/2018 1:40-2:30TIME&WORK 22-01-18 1:40-2:30
ALLIGATION AND MIXTURE 29-01-18 2:30-4:10
SEATING ARRANGMENT,
PUZZLE TEST5/2/2018 2:30-4:10
BLOOD RELATIONS,
SYLLOGSAMS12/2/2018 2:30-4:10
D.I & D.S 19-02-18 2:30-4:10NON-VERBAL 5/3/2018 2:30-4:10
GA PERMUTATION&COMB 28-11-17 10:05-10:55
MODULE-2 PROBABILITY 5/12/2017 10:05-10:55(B.Tech III-II
Sem) SI&CI 12/12/2017 10:05-10:55
EEE-C TIME&DISTANCE 19-12-17 10:05-10:55TIME&WORK 9/1/2018 10:05-10:55
ALLIGATION AND MIXTURE 23-01-18 11:10-12:50
SEATING ARRANGMENT,
PUZZLE TEST30-01-18 11:10-12:50
BLOOD RELATIONS,
SYLLOGSAMS6/1/2018 11:10-12:50
D.I & D.S 20-02-18 11:10-12:50NON-VERBAL 13-03-18 11:10-12:50
Public Speaking & How to set Goals 7/8/2017 10:05 to 12:50
Service Denial and Time Management 22/08/2017 10:05 to 12:50
Module 2(III B Tech - Sem
Professionalism of work 19/09/2017 10:05 to 12:50
SF-12
C-Block /Electrical and
Electronics Engineering
SF-13
C-Block /Electrical and
Electronics Engineering
SF-14
C-Block /Electrical and
Electronics Engineering
SF - 12
Soft Skills
Conflict Management 5/9/2017 10:05 to 12:50
Anger Management &Stress Management 12/9/2017 10:05 to 12:50
I)
Body Language at work & B'ness 3/10/2017 10:05 to 12:50
Public Speaking & How to set Goals 20/06/2017 13:40 to 16:10
Service Denial and Time Management 27/06/2017 13:40 to 16:10
Module 2(III B Tech - Sem
Professionalism of work 25/07/2017 13:40 to 16:10
Body Language at work & B'ness 1/8/2017 13:40 to 16:10
Public Speaking & How to set Goals 15/06/2017 13:40 to 16:10
Service Denial and Time Management 22/06/2017 13:40 to 16:10
Module 2(III B Tech - Sem
Professionalism of work 20/07/2017 13:40 to 16:10
Body Language at work & B'ness 27/07/2017 13:40 to 16:10
Public Speaking & How to set Goals 17/06/2017 10:05 to 12:50
Service Denial and Time Management 21/08/2017 10:05 to 12:50
Module 2(III B Tech - Sem
Professionalism of work 11/9/2017 10:05 to 12:50
Body Language at work & B'ness 19/09/2017 10:05 to 12:50
Public Speaking & How to set Goals 18/06/2017 13:40 to 16:10
Service Denial and Time Management 22/08/2017 13:40 to 16:10
Module 2(III B Tech - Sem
Professionalism of work 12/9/2017 13:40 to 16:10
Body Language at work & B'ness 19/09/2017 13:40 to 16:10
Public Speaking & How to set Goals 13/06/2017 10:05 to 12:50
Service Denial and Time Management 20/06/2017 10:05 to 12:50
Module 2(III B Tech - Sem
Professionalism of work 25/07/2017 10:05 to 12:50
Body Language at work & B'ness 8/7/2017 10:05 to 12:50
Public Speaking & How to set Goals 14/06/2017 13:40 to 16:10
Service Denial and Time Management 21/06/2017 13:40 to 16:10
SF-17
E-Block / CIVIL
Soft Skills
Conflict Management 27/06/2017 10:05 to 12:50
Anger Management &Stress Management 18/07/2017 10:05 to 12:50
I)
Soft Skills
Conflict Management 28/06/2017 13:40 to 16:10
18/07/2017 13:40 to 16:10
I)
SF - 14
Soft Skills
Conflict Management 29/06/2017 13:40 to 16:10
Anger Management &Stress Management 13/07/2017 13:40 to 16:10
I)
FF-07
E-Block / MECH
Soft Skills
Conflict Management 28/08/2017 10:05 to 12:50
Anger Management &Stress Management 4/9/2017 10:05 to 12:50
I)
FF-08
Soft Skills
Conflict Management 29/08/2017 13:40 to 16:10
Anger Management &Stress Management 5/9/2017 13:40 to 16:10
I)
C-Block / Electrical And
Electronics Engineering
SF - 13
Soft Skills
Conflict Management 11/7/2017 13:40 to 16:10
Anger Management &Stress Management
Module 2(III B Tech - Sem
Professionalism of work 26/07/2017 13:40 to 16:10
Body Language at work & B'ness 8/9/2017 13:40 to 16:10
Public Speaking & How to set Goals 20/11/2017 11:10 to 12:50
Service Denial and Time Management 27/11/2017 11:10 to 12:50
Module 2(III B Tech - Sem
Professionalism of work 18/12/2017 11:10 to 12:50
Body Language at work & B'ness 8/1/2018 11:10 to 12:50
Public Speaking & How to set Goals 18/12/2017 13:40 to 15:20
Service Denial and Time Management 8/1/2018 13:40 to 15:20
Module 2(III B Tech - Sem
Professionalism of work 12/2/2018 13:40 to 15:20
Body Language at work & B'ness 19/02/2018 13:40 to 15:20
Public Speaking & How to set Goals 9/1/2018 11:10 to 12:50
Service Denial and Time Management 23/01/2018 11:10 to 12:50
Module 2(III B Tech - Sem
Professionalism of work 6/3/2018 11:10 to 12:50
Body Language at work & B'ness 13/03/2018 11:10 to 12:50
Public Speaking & How to set Goals 22/11/2017 11:10 to 12:50
Service Denial and Time Management 29/11/2017 11:10 to 12:50
Module 2(III B Tech - Sem
Professionalism of work 10/1/2018 11:10 to 12:50
Body Language at work & B'ness 31/01/2018 11:10 to 12:50
Public Speaking & How to set Goals 20/12/2017 11:10 to 12:50
Service Denial and Time Management 31/01/2017 13:40 to 15:20
Module 2(III B Tech - Sem
Professionalism of work 14/03/2018 13:40 to 15:20
Body Language at work & B'ness 7/3/2017 13:40 to 15:20
SF-17
D-Block / CSE
Soft Skills
Conflict Management 13/12/2017 11:10 to 12:50
Anger Management &Stress Management 3/1/2018 11:10 to 12:50
II)
SF-19
Soft Skills
Conflict Management 14/02/2017 13:40 to 15:20
Anger Management &Stress Management 28/02/2017 13:40 to 15:20
II)
SF-17
A-Block / ECE
Soft Skills
Conflict Management 3/12/2017 11:10 to 12:50
Anger Management &Stress Management 11/12/2017 11:10 to 12:50
II)
SF-26
Soft Skills
Conflict Management 22/01/2018 13:40 to 15:20
Anger Management &Stress Management 29/01/2018 13:40 to 15:20
II)
FF-18
Soft Skills
Conflict Management 30/01/2018 11:10 to 12:50
Anger Management &Stress Management 27/02/2018 11:10 to 12:50
II)
SF-18Conflict Management 28/06/2017 13:40 to 16:10
Anger Management &Stress Management 19/07/2019 13:40 to 16:10
I)
255 R. Prabha
Public Speaking & How to set Goals 24/11/2017 11:10 to 12:50
Service Denial and Time Management 1/12/2017 11:10 to 12:50
Module 2(III B Tech - Sem
Professionalism of work 22/12/2017 11:10 to 12:50
Body Language at work & B'ness 5/1/2017 11:10 to 12:50
Public Speaking & How to set Goals 24/11/2017 14:30 to 16:10
Service Denial and Time Management 1/12/2017 14:30 to 16:10
Soft SkillsModule 2
(III B Tech - Sem
Professionalism of work 2/2/2017 14:30 to 16:10
Body Language at work & B'ness 9/3/2017 14:30 to 16:10
10.05to
12.5510.05
to12.5510.05
to12.5510.05
to12.5510.05
to12.5510.05
to12.5510.05
to12.55
One Word Substitutions 24-06-17 10.05 - 12.50
Tenses Classification 25-07-17 10.05 - 12.50Words often Confused 9/8/2017 10.05 - 12.50
Active Voice and Passive Voice 11/9/2017 10.05- 12.50
Verbal Analogies 4/10/2017 10.05-12.50
General English One Word Substitutions 24-06-17 1.40-4.10
Module-I Tenses Classification 25-07-17 1.40-4.10(II B. Tech II-I
Sem EEE B) Words often Confused 9/8/2017 1.40-4.10
Active Voice and Passive Voice 11/9/2017 1.40-4.10
Verbal Analogies 4/10/2017 1.40-4.10
General English One Word Substitutions 25-06-17 10.05 - 12.50
Module-I Tenses Classification 26-07-17 10.05 - 12.50(II B. Tech II-I
Sem EEE C) Words often Confused 10/8/2017 10.05 - 12.50
Active Voice and Passive Voice 12/9/2017 10.05- 12.50
General English Module-I (II B. Tech II-I Sem
EEE A)
SF-09
C-Block / Electrical And
Electronics Engineering
SF-10
SF-11
FF-11 B-Block / ITConflict Management 8/12/2017 14:30 to 16:10
Anger Management &Stress Management 22/12/2017 14:30 to 16:10
II)
256 S.Bhaskar Babu (B.Tech II-I Sem)
Career Counseling( Mech-A) 06.08.17
FF-16
E-Block / Mechanical Engineering
(A&B)Career Counseling( Mech-B) 13.08.1
Career Counseling( Civil-A) 20.08.17
SF-07E-Block / Civil
Engineering (A&B)Career Counseling(
Civil-B) 27.08.17
Career Counseling( Cse-A) 04.09.17
SF-10D-Block / Civil
Engineering (A&B)
Career Counseling( Cse-B) 11.09.17
Career Counseling( Cse-C) 18.09.17
SF-20
Soft Skills
Conflict Management 8/12/2017 11:10 to 12:50
Anger Management &Stress Management 15/12/2017 11:10 to 12:50
II)
Verbal Analogies 5/10/2017 10.05-12.50General English Module-I (II B. Tech II-I Sem
ME A)
One Word Substitutions 27-06-17 10.05 - 12.50
Tenses Classification 27-07-17 10.05 - 12.50Words often Confused 11/8/2017 10.05 - 12.50
Active Voice and Passive Voice 13-09-17 10.05- 12.50
Verbal Analogies 6/10/2017 10.05-12.50
General English One Word Substitutions 27-06-17 1.40-4.10
Module-I Tenses Classification 27-07-17 1.40-4.10(II B. Tech II-I
Sem ME B) Words often Confused 11/8/2017 1.40-4.10
Active Voice and Passive Voice 13-09-17 1.40-4.10
Verbal Analogies 6/10/2017 1.40-4.10
General English One Word Substitutions 28-06-17 10.05 - 12.50
Module-I Tenses Classification 28-07-17 10.05 - 12.50(II B. Tech II-I
Sem CE A) Words often Confused 12/8/2017 10.05 - 12.50
Active Voice and Passive Voice 14-09-17 10.05- 12.50
Verbal Analogies 7/10/2017 10.05-12.50
General English One Word Substitutions 28-06-17 1.40-4.10
Module-I Tenses Classification 28-07-17 1.40-4.10(II B. Tech II-I
Sem CE B) Words often Confused 12/8/2017 1.40-4.10
Active Voice and Passive Voice 14-09-17 1.40-1.40-4.10
Verbal Analogies 7/10/2017 1.40-4.10General English Module-I (II B. Tech II-II Sem
ECE A)
One Word Substitutions 4/12/2017 10.05-12.50
Tenses Classification 3/1/2018 10.05-12.50Words often Confused 20-02-18 10.05-12.50
Active Voice and Passive Voice 22-03-18 10.05-12.50
Verbal Analogies 24-04-18 10.05-12.50
General English One Word Substitutions 4/12/2017 1.40-4.10
Module-I Tenses Classification 3/1/2018 1.40-4.10(II B. Tech II-II
Sem ECE B) Words often Confused 20-02-18 1.40-4.10
Active Voice and Passive Voice 22-03-18 1.40-1.40-4.10
Verbal Analogies 24-04-18 1.40-4.10
General English One Word Substitutions 5/12/2017 10.05-12.50
Module-I Tenses Classification 4/1/2018 10.05-12.50(II B. Tech II-II
Sem ECE C) Words often Confused 21-02-18 10.05-12.50
Active Voice and Passive Voice 23-03-18 10.05-12.50
Verbal Analogies 25-04-18 10.05-12.50
General English One Word Substitutions 6/12/2017 10.05-12.50
Module-I Tenses Classification 5/1/2018 10.05-12.50(II B. Tech II-II
Sem CSE A) Words often Confused 22-02-18 10.05-12.50
Active Voice and Passive Voice 24-03-18 10.05-12.50
Verbal Analogies 26-04-18 10.05-12.50
257 B. Vijay Kumar
FF-16
E-Block / Mechanical Engineering
F-17
SF-07
E-Block / Civil Engineering
SF-08
SF-21
A-Block / Elecronics And Communication
EngineeringSF-22
SF-25
SF-11
General English One Word Substitutions 6/12/2017 1.40-4.10
Module-I Tenses Classification 5/1/2018 1.40-4.10(II B. Tech II-II
Sem CSE B) Words often Confused 22-02-18 1.40-4.10
Active Voice and Passive Voice 24-03-18 1.40-1.40-4.10
Verbal Analogies 26-04-18 1.40-4.10
General English One Word Substitutions 7/12/2018 10.05-12.50
Module-I Tenses Classification 6/1/2018 10.05-12.50(II B. Tech II-II
Sem CSE C) Words often Confused 23-02-18 10.05-12.50
Active Voice and Passive Voice 25-03-18 10.05-12.50
Verbal Analogies 26-04-18 10.05-12.50
General English One Word Substitutions 8/12/2018 10.05-12.50 B-Block/
Module-I Tenses Classification 7/1/2018 10.05-12.50 Information Technology
(II B. Tech II-II Sem IT) Words often Confused 24-02-18 10.05-12.50
Active Voice and Passive Voice 26-03-18 10.05-12.50
Verbal Analogies 27-04-18 10.05-12.50Phonetics 22.08.17 1:40 to 4:10
Audio & Video Clips 05.09.17 1:40 to 4:10Dialogues 27.09.17 1:40 to 4:10
Reading SQ3R 11.10.17 1:40 to 4:10Data interpretation 24.10.17 1:40 to 4:10
SOFT SKILLS 10.05MODULE-1 to 12.55
(B.Tech II-I Sem)Career Goals for
B.Tech. graduates & Know your Industry
29-06-17 10.05 to 12.55
10.05to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.55
SOFT SKILLS Introduction to Soft skills 22-06-17 1.40 to 4.10
MODULE-1 Career Goals for
B.Tech. graduates & Know your Industry
29-06-17 1.40 to 4.10
(B.Tech II-I Sem)Body Language& and
importance of non verbal communication
6/7/2017 1.40 to 4.10
Listening skills 13-07-17 1.40 to 4.10 Art of
Communication& 7 C of communication
20-07-17 1.40 to 4.10
Business Communication 3/8/2017 1.40 to 4.10
Interpersonal communication &
Johari windows17-08-17 1.40 to 4.10
SOFT SKILLS 10.05MODULE-1 to 12.55
(B.Tech II-I SemCareer Goals for
B.Tech. graduates & Know your Industry
26-06-17 10.05 to 12.55
258 D.Rajesh BECS LAB
COMMUNICAT
ION LAB
A-Block / English Lab
Introduction to Soft skills 22-06-17
SF-07
E-Block / Civil Engineering
(A&B)
Body Language& and importance of non 6/7/2017
Listening skills 13-07-17
Art of Communication& 7 C 20-07-17
Business Communication 3/8/2017
Interpersonal communication & 17-08-17
SF-08
Introduction to Soft skills 19-06-17
D-Block/ Computer Science
Engineering
SF-10
SF-09
FF-11
10.05to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.55
SOFT SKILLS Introduction to Soft skills 19-06-17 1.40 to 4.10
MODULE-1 Career Goals for
B.Tech. graduates & Know your Industry
26-06-17 1.40 to 4.10
(B.Tech II-I SemBody Language& and
importance of non verbal communication
3/7/2017 1.40 to 4.10
Listening skills 10/7/2017 1.40 to 4.10 Art of
Communication& 7 C of communication
17-07-17 1.40 to 4.10
Business Communication 24-08-17 1.40 to 4.10
Interpersonal communication &
Johari windows31-08-17 1.40 to 4.10
SOFT SKILLS MODULE-1 (B.Tech I- m
Introduction to Soft skills 20-06-17 10.05 to 12.55
Career Goals for B.Tech. graduates & Know your Industry
27-06-17 10.05 to 12.55
10.05to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.55
10.05to 12.55
SOFT SKILLS 10.05MODULE-1 to 12.55
(B.Tech II-II SemCareer Goals for
B.Tech. graduates & Know your Industry
4/11/2017 10.05 to 12.55
10.05to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.55
SOFT SKILLS Introduction to Soft skills 27-11-17 1.40 to 4.10
MODULE-1 Career Goals for
B.Tech. graduates & Know your Industry
4/11/2017 1.40 to 4.10
(B.Tech II-II SemBody Language& and
importance of non verbal communication
11/12/2017 1.40 to 4.10
A-Block / ECE
Body Language& and importance of non 11/12/2017
Listening skills 18-12-17
Art of Communication& 7 C 25-12-17
Business Communication 8/1/2018
Interpersonal communication & 22-01-18
Business Communication 24-08-17
Interpersonal communication & 31-08-17
SF-10
SF-11
Body Language& and importance of non 4/7/2017
Listening skills 11/7/2017
Art of Communication& 7 C 18-07-17
Business Communication 1/8/2017
Interpersonal communication & 8/8/2017
Introduction to Soft skills 27-11-17
SF-21
259 D Kanta Rao
SF-09
C-Block / EEE (A&B&C)
Body Language& and importance of non 3/7/2017
Listening skills 10/7/2017
Art of Communication& 7 C 17-07-17
Listening skills 18-12-17 1.40 to 4.10 Art of
Communication& 7 C of communication
25-12-17 1.40 to 4.10
Business Communication 8/1/2018 1.40 to 4.10
Interpersonal communication &
Johari windows22-01-18 1.40 to 4.10
SOFT SKILLS 10.05MODULE-1 to 12.55
(B.Tech II-II SemCareer Goals for
B.Tech. graduates & Know your Industry
5/11/2017 10.05 to 12.55
10.05to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.55SOFT SKILLS 10.05MODULE-1 to 12.55
(B.Tech II-II SemCareer Goals for
B.Tech. graduates & Know your Industry
6/11/2017 10.05 to 12.55
10.05to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.5510.05
to 12.55
SOFT SKILLS Introduction to Soft skills 29-11-17 1.40 to 4.10
MODULE-1 Career Goals for
B.Tech. graduates & Know your Industry
6/11/2017 1.40 to 4.10
(B.Tech II-II SemBody Language& and
importance of non verbal communication
13-12-17 1.40 to 4.10
Listening skills 18-12-17 1.40 to 4.10 Art of
Communication& 7 C of communication
20-12-17 1.40 to 4.10
Business Communication 27-01-18 1.40 to 4.10
Interpersonal communication &
Johari windows3/1/2018 1.40 to 4.10
SOFT SKILLS 10.05MODULE-1 to 12.55
(B.Tech II-II SemCareer Goals for
B.Tech. graduates & Know your Industry
7/11/2017 10.05 to 12.55
10.05to 12.5510.05
to 12.5510.05
to 12.55
Introduction to Soft skills 29-11-17
SF-11
A-Block / CSE (A&B&C)
Body Language& and importance of non 13-12-17
Listening skills 18-12-17
Art of Communication& 7 C 20-12-17
Business Communication 27-01-18
Interpersonal communication & 3/1/2018
SF-10
Introduction to Soft skills 30-11-17
SF-09
Body Language& and importance of non 14-12-17
Listening skills 21-12-17
Art of Communication& 7 C 28-12-17
A-Block / ECE (A&B&C)SF-22
Introduction to Soft skills 28-11-17
SF-25
Body Language& and importance of non 12/12/2017
Listening skills 19-12-17
Art of Communication& 7 C 26-12-17
Business Communication 2/1/2018
Interpersonal communication & 9/1/2018
10.05to 12.5510.05
to 12.55
SOFT SKILLS Introduction to Soft skills 30-11-17 1.40 to 4.10
MODULE-1 Career Goals for
B.Tech. graduates & Know your Industry
7/11/2017 1.40 to 4.10
(B.Tech II-II SemBody Language& and
importance of non verbal communication
14-12-17 1.40 to 4.10
Listening skills 21-12-17 1.40 to 4.10 Art of
Communication& 7 C of communication
28-12-17 1.40 to 4.10
Business Communication 4/1/2018 1.40 to 4.10
Interpersonal communication &
Johari windows18-01-18 1.40 to 4.10
Group Discussion (Mech-A) 06.08.17 10.05 to 12.55
Behavioral Skills ( Mech-B) 13.08.1 10.05 to 12.55
Jam Sessions ( Civil-A) 20.08.17 10.05 to 12.55
Mock Interviews ( Civil-B) 27.08.17 10.05 to 12.55
10.05to 11.00
E-Waste recovery 27 -09-17 11.00 to 1 1.50
ECE-A, SF-10ECE-B,
SF-9Mech-A
FF-9Mech-B
FF-8CSE-ASF-16CSE-BSF-17EEE-AFF-04EEE-BFF-8
Civil-AFF-9
Civil-BFF-10L/IT FF-5EEE
Problem Solving and Time Management 29.01.18
1:40 to 4:10C-Block
2.30 to 3.20
Business English 14.02.181:40 to 4:10
E-Block2.30 to 3.20
Vocabulary Development 06.03.18 2.30 to 3.20 B-Block
Introduction of Semi 18.09.17 1:40 to 4:10
A-Block/ECE
4.12.17 1:40 to 4:10 SF-10 D-Block/CSE
Switching Action in liquid Crystals
30.01.18 1:40 to 4:10 FF_16 A-Block/ECE
12.02.18 1:40 to 4:10 SF-10 D-Block/CSE
263 Gabrial Guzzarai English
Employability Skills 16.09.171:40 to 4:10
A-Block2.30 to 3.20
Effective Technical communication 08.11.17
2.30 to 3.20E-Block
1:40 to 4:10
Phonetics 02.12.171:40 to 4:10
D-Block 2.30 to 3.20
SF-14 B-Block / IT Engineering
260 K.Vidya Sagar (B.Tech II-I Sem)
FF-16
E-Block / Mechanical Engineering
(A&B)
SF-07E-Block / Civil Engineering(A&
B)
261 Dr.B.Rama Raju Chemistry /B.Tech II-I
Cellulose based Materials for Energy 25-09-17 FF-16
A-Block / Electronic
Communication
262 K.K.D.Ramesh Eng.Physics
Liquid Crystals and their applications
20.09.17 1:40 to 4:10 FF_16 A-Block/ECE
13.10.17 1:40 to 4:10 SF-10 D-Block/CSE
Polarization 30.11.17 1:40 to 4:10 FF_16
Business Communication 4/1/2018
Interpersonal communication & 18-01-18
FF-09EEE
FF-08EEE
SF-16EEE
SF-15Application of Nano
materials 15.03.18 1:40 to 4:10 CIVIL E-Block
15.02.18 1:40 to 4:10 SF-9 CIVIL / E-Block
MEMS(B.Tech III-II
Sem)20-11-17
Scope of ME, Introduction to demand 22-11-17 12.00 to 12.50
Determinants of demand, Law of demand and its
exceptions
23-11-17 12.00 to 12.50
Recruitment , selection,T&D 15-03-18 12.00 to 12.50
Differences wages system, salary&
compensation, job evaluation etc..
17-03-18 1.40 to 2.30
MEMS
Managerial Economics definition and
Introduction to some topics and nature
22-11-17 2.30 to 3.20
(B.Tech III-II Sem))
Scope of ME, Introduction to demand 23-11-17 2.30 to 3.20
Determinants of demand, Lwa of demand and its
exceptions
24-11-17 9.15 to 10.05
Recruitment , selection,T&D 13-03-18 1.40 to 2.30
IEMBasic concepts of
Organization and its structures
21-11-17 9.15 to 10.05
(B.Tech III-II Sem)
Organizational Structures and its
merits and demerits23-11-17 10.05 to 10.55 and 3.20
to 4.10
Definition of plant layout and types 6/1/2018 9.15 to 10.05
ABC analysis and VED Analysis 17-02-18 9.15 to 10.05
FF-8 MECH /E-Block
266 K.Vidya Sagar Soft Skills Problem Solving and Time Management 06.09.17 1:40 to 4:10 FF-10 Mech/ E-Block
FF-8 MECH / E-Block
Introduction of Semi Conductor & Super
Conductor 31.01.18
1:40 to 4:10 SF-9 CIVIL /E-Block
1:40 to 4:10 FF-8 MECH /E-Block
Application of semi conductor & Super
conductor 23.03.18 1:40 to 4:10
267 V Gopalakrishna
Managerial Economics definition and
Introduction to some topics and nature
3.20 to 4.10
SF-12,26 A-Block
Differences wages system, salary& 17-03-18 11.10 to 12.00
FF-08 E-Block
265 Y.Gopala Rao Chemistry
Introduction to Nano technology and
Preparation of Nano Material
25.09.17 1:40 to 4:10 SF-9 CIVIL/E-Block
26.09.17 1:40 to 4:10 FF-8 MECH/E-Block
Application of Nano materials
02.11.17 1:40 to 4:10 SF-9 CIVIL/E-Block
03.11.17 1:40 to 4:10
264 Duravasulu Baledi Chemsitry
Conductor & Super 18.09.17 1:40 to 4:10
C-BlockApplication of semi conductor & Super
conductor
21.10.17 1:40 to 4:10
25.01.18 1:40 to 4:10
Introduction to Nano technology and 19.02.18 1:40 to 4:10
14 Principles of TQM And Quality Circles 16-03-18 12.00 to 12.50
IMS
Introduction to Management, Organizational
Structures
21-06-17 2.30 to 3.20
(B.Tech III-I Sem)
Maslow’s need hierarchy theory 30-06-17 9.15 to 10.05
Introduction to Capital Budgeting 2/8/2017 2.30 to 320
Lwa of demand and its exceptions 8/9/2017 9.15 to 10.05
GF-6 B-Block