s h e e t t i t l elandmarkscommission.org/wp-content/uploads/2020/06/857... · 2020. 6. 11. ·...

COVERSHEET

CS

857 BELMONT AVECHARLOTTE, NC 28205

MEP ENGINEERSALLIED CONSULTING ENGINEERS

2905-D QUEEN CITY DRIVECHARLOTTE, NC 28208

704.399.3943

SHEET INDEX

ARCHITECTPFAHL ARCHITECTS

1200 THE PLAZA SUITE ECHARLOTTE, NC 28205

704.342.1065

VICINITY MAP

857 BELMONT AVE

S H E E T T I T L E

S H E E T N U M B E R

ARCHITECTS

P HA L

I S S U E D A T E

857

BELM

ON

T AV

E

STRUCTURALMICHAEL R. LOVE, P.E.

9935-D REA RD #421CHARLOTTE, NC 28277

704.654.0324

CIVILMDV ENGINEERING

215 JOHNSTON STREETROCK HILL, SC 29730

704-400-1044

AutoCAD SHX TextSHEET #

AutoCAD SHX TextSHEET TITLE

AutoCAD SHX TextDATE

AutoCAD SHX TextREVISION 1




AutoCAD SHX TextG1

AutoCAD SHX TextGENERAL NOTES

AutoCAD SHX TextCS

AutoCAD SHX TextCOVERSHEET-SHEET INDEX-VICINITY MAP

AutoCAD SHX TextA1

AutoCAD SHX TextA2

AutoCAD SHX TextFIRST FLOOR PLAN

AutoCAD SHX TextGROUND FLOOR PLAN

AutoCAD SHX TextA3

AutoCAD SHX TextG2

AutoCAD SHX TextP1

AutoCAD SHX TextPLUMBING SPECS AND SCHEDULES

AutoCAD SHX TextP2

AutoCAD SHX TextPLUMBING FLOOR PLANS

AutoCAD SHX TextOUTDOOR AIR CALCS

AutoCAD SHX TextM1

AutoCAD SHX TextMECHANICAL SCHEDULES

AutoCAD SHX TextM2

AutoCAD SHX TextMECHANICAL FLOOR PLANS

AutoCAD SHX TextM3

AutoCAD SHX TextM4

AutoCAD SHX TextMECHANICAL GAS PLANS

AutoCAD SHX TextELECTRICAL SPECS AND SYMBOLS

AutoCAD SHX TextELECTRICAL LIGHTING FLOOR PLAN

AutoCAD SHX TextE1

AutoCAD SHX TextELECTRICAL POWER FLOOR PLAN

AutoCAD SHX TextE2

AutoCAD SHX TextPANELS, RISER & DETAILS

AutoCAD SHX TextE3

AutoCAD SHX TextE4

AutoCAD SHX TextAPPENDIX B_LIFE SAFETY PLAN

AutoCAD SHX TextSCHEDULES

AutoCAD SHX Text11.20.2019

AutoCAD SHX TextArchitects and is not to be reproduced

AutoCAD SHX Textor copied in whole or part. It is only to be

AutoCAD SHX Textand is not be used on any other project.

AutoCAD SHX Textused for the project identified herein

AutoCAD SHX TextIt is to be returned upon request

AutoCAD SHX TextThis drawing is the property of Pfahl

AutoCAD SHX Text1200 THE PLAZA, SUITE E

AutoCAD SHX TextCHARLOTTE, NC 28205

AutoCAD SHX Text704 342 1065 FAX 704 342 1093


AutoCAD SHX Text857 BELMONT AVE

AutoCAD SHX Text02-05-2020

AutoCAD SHX TextFOR CONSTRUCTION 02-05-2020

AutoCAD SHX TextEXISTING CONDITIONS & SITE PLAN

AutoCAD SHX TextC1


AutoCAD SHX TextM5

AutoCAD SHX TextMECHANICAL DETAILS











AutoCAD SHX TextA4

AutoCAD SHX TextFIRST FLOOR RCP

AutoCAD SHX TextA5

AutoCAD SHX TextGROUND FLOOR RCP

AutoCAD SHX TextA6

AutoCAD SHX TextROOF PLAN

AutoCAD SHX TextA7

AutoCAD SHX TextELEVATIONS

AutoCAD SHX TextS0

AutoCAD SHX TextSTRUCTURAL NOTES
















AutoCAD SHX TextS1

AutoCAD SHX TextFOUNDATION PLAN

AutoCAD SHX TextS2

AutoCAD SHX TextFIRST FLOOR FRAMING PLAN

AutoCAD SHX TextS3

AutoCAD SHX TextROOF FRAMING PLAN

AutoCAD SHX TextS4

AutoCAD SHX TextADA RAMP DETAIL

AutoCAD SHX TextS5

AutoCAD SHX TextSECTIONS/DETAILS

B

3

101A

100

LA

ST

M

OD

IF

IE

D: O

CT

OB

ER

1

2, 2

01

5

G1

GENERAL NOTES

S H E E T T I T L E


ARCHITECTS

P HA L

I S S U E D A T E

857

BELM

ON

T AV

E

AutoCAD SHX TextSYMBOLS

AutoCAD SHX TextINCLUDE

AutoCAD SHX TextINSULATION

AutoCAD SHX TextINSTALLATION

AutoCAD SHX TextJUNCTION BOX

AutoCAD SHX TextINCANDESCENT

AutoCAD SHX TextINSTL

AutoCAD SHX TextJB

AutoCAD SHX TextINCL

AutoCAD SHX TextINSUL

AutoCAD SHX TextINCAN

AutoCAD SHX TextWC

AutoCAD SHX TextWR

AutoCAD SHX TextWD

AutoCAD SHX TextWALLCOVERING

AutoCAD SHX TextWASTE RECEPTACLE

AutoCAD SHX TextWOOD

AutoCAD SHX TextNON COMB

AutoCAD SHX TextP-LAM

AutoCAD SHX TextREQ'D

AutoCAD SHX TextSCHED

AutoCAD SHX TextGYPSUM WALL BOARD

AutoCAD SHX TextFLAT BAR

AutoCAD SHX TextFIRE EXTINGUISHER

AutoCAD SHX TextFLOOR

AutoCAD SHX TextFLUORESCENT

AutoCAD SHX TextFOOT/FEET

AutoCAD SHX TextFURNISH

AutoCAD SHX TextGAUGE

AutoCAD SHX TextGALVANIZED

AutoCAD SHX TextGLASS/GLAZING

AutoCAD SHX TextHARDWARE

AutoCAD SHX TextHORIZONTAL

AutoCAD SHX TextHOLLOW METAL

AutoCAD SHX TextHEIGHT

AutoCAD SHX TextAIR CONDITIONING

AutoCAD SHX TextFURNISHED BY OWNER

AutoCAD SHX TextINSTALLED BY CONTRACTOR

AutoCAD SHX TextGYPSUM WALL BOARD

AutoCAD SHX TextHOLLOW CORE WOOD

AutoCAD SHX TextHEATING, VENTILATING,

AutoCAD SHX TextGL

AutoCAD SHX TextHOR

AutoCAD SHX TextHVAC

AutoCAD SHX TextIN

AutoCAD SHX TextHM

AutoCAD SHX TextHT

AutoCAD SHX TextINCH

AutoCAD SHX TextHCW

AutoCAD SHX TextHDW

AutoCAD SHX TextHD

AutoCAD SHX TextGYP BD

AutoCAD SHX TextGWB

AutoCAD SHX TextHARD

AutoCAD SHX TextGALV

AutoCAD SHX TextGA

AutoCAD SHX TextFURN

AutoCAD SHX TextFT

AutoCAD SHX TextFLUOR

AutoCAD SHX TextFOIC

AutoCAD SHX TextFLR

AutoCAD SHX TextFB

AutoCAD SHX TextFE

AutoCAD SHX TextFIN

AutoCAD SHX TextFINISH

AutoCAD SHX TextTEMP

AutoCAD SHX TextVCT

AutoCAD SHX TextW

AutoCAD SHX TextW/O

AutoCAD SHX TextW/

AutoCAD SHX TextVERT

AutoCAD SHX TextVEN

AutoCAD SHX TextUNO

AutoCAD SHX TextV

AutoCAD SHX TextVAR

AutoCAD SHX TextTPH

AutoCAD SHX TextTYP

AutoCAD SHX TextSTG

AutoCAD SHX TextSUSP

AutoCAD SHX TextTEL

AutoCAD SHX TextSTD

AutoCAD SHX TextSTL

AutoCAD SHX TextSM

AutoCAD SHX TextSQ

AutoCAD SHX TextSND

AutoCAD SHX TextSECT

AutoCAD SHX TextSIM

AutoCAD SHX TextSHT

AutoCAD SHX TextDIAMETER

AutoCAD SHX TextCOLUMN

AutoCAD SHX TextCONCRETE

AutoCAD SHX TextCONSTRUCTION

AutoCAD SHX TextCONTINUOUS

AutoCAD SHX TextCONTRACTOR

AutoCAD SHX TextCOORDINATE

AutoCAD SHX TextCARPET

AutoCAD SHX TextDETAIL

AutoCAD SHX TextDIAMETER

AutoCAD SHX TextDIMENSION

AutoCAD SHX TextDRAWING

AutoCAD SHX TextELECTRIC

AutoCAD SHX TextELEVATION (VIEW)

AutoCAD SHX TextENAMEL

AutoCAD SHX TextEQUAL

AutoCAD SHX TextCONCRETE MASONRY UNIT

AutoCAD SHX TextELEVATION (HEIGHT)

AutoCAD SHX TextEXISTING

AutoCAD SHX TextDIM

AutoCAD SHX TextEL

AutoCAD SHX TextEXIST

AutoCAD SHX TextEN

AutoCAD SHX TextEQ

AutoCAD SHX TextELEC

AutoCAD SHX TextELEV

AutoCAD SHX TextDWG

AutoCAD SHX TextE

AutoCAD SHX TextEA.

AutoCAD SHX TextDN

AutoCAD SHX TextDR

AutoCAD SHX TextEAST

AutoCAD SHX TextEACH

AutoCAD SHX TextDOWN

AutoCAD SHX TextDOOR

AutoCAD SHX TextCONTR

AutoCAD SHX TextDET

AutoCAD SHX Text%%C

AutoCAD SHX TextDIA

AutoCAD SHX TextCOORD

AutoCAD SHX TextCPT

AutoCAD SHX TextCONST

AutoCAD SHX TextCONT

AutoCAD SHX TextCMU

AutoCAD SHX TextCONC

AutoCAD SHX TextCOL

AutoCAD SHX TextRB

AutoCAD SHX TextRO

AutoCAD SHX TextSCW

AutoCAD SHX TextSEAL

AutoCAD SHX TextSD

AutoCAD SHX TextS

AutoCAD SHX TextRM

AutoCAD SHX TextREV

AutoCAD SHX TextREFR

AutoCAD SHX TextREINF

AutoCAD SHX TextPR

AutoCAD SHX TextPT

AutoCAD SHX TextR

AutoCAD SHX TextPOL

AutoCAD SHX TextPLWD

AutoCAD SHX TextOPP

AutoCAD SHX TextPL

AutoCAD SHX TextNTS

AutoCAD SHX TextOC

AutoCAD SHX TextOPNG

AutoCAD SHX TextAIR CONDITIONING

AutoCAD SHX TextALTERNATE

AutoCAD SHX TextALUMINUM

AutoCAD SHX TextANODIZED

AutoCAD SHX TextAPPROXIMATELY

AutoCAD SHX TextARCHITECTURAL

AutoCAD SHX TextBUILDING

AutoCAD SHX TextBLOCKING

AutoCAD SHX TextCABINET

AutoCAD SHX TextCIRCULATION

AutoCAD SHX TextANGLE

AutoCAD SHX TextACOUSTICAL CEILING TILE

AutoCAD SHX TextADJUSTABLE/ADJACENT

AutoCAD SHX TextABOVE FINISHED FLOOR

AutoCAD SHX TextBUILDING STANDARD

AutoCAD SHX TextCLEAR OR CLEARANCE

AutoCAD SHX TextABBREVIATIONS

AutoCAD SHX TextCENTERLINE

AutoCAD SHX TextCEILING

AutoCAD SHX TextAPPROX.

AutoCAD SHX TextCLR

AutoCAD SHX TextCL

AutoCAD SHX TextCLG

AutoCAD SHX TextCIRC

AutoCAD SHX TextCAB

AutoCAD SHX TextB/S

AutoCAD SHX TextBLDG

AutoCAD SHX TextBLK'G

AutoCAD SHX TextBM

AutoCAD SHX TextARCH

AutoCAD SHX Text@

AutoCAD SHX TextBEAM

AutoCAD SHX TextAT

AutoCAD SHX TextADJ

AutoCAD SHX TextALUM

AutoCAD SHX TextANOD

AutoCAD SHX TextL

AutoCAD SHX TextAFF

AutoCAD SHX TextALT

AutoCAD SHX TextACT

AutoCAD SHX TextAC

AutoCAD SHX TextMED

AutoCAD SHX TextNO

AutoCAD SHX TextNOM

AutoCAD SHX TextN

AutoCAD SHX TextNIC

AutoCAD SHX TextN/A

AutoCAD SHX TextMO

AutoCAD SHX TextMTL

AutoCAD SHX TextMTD

AutoCAD SHX TextMISC

AutoCAD SHX TextMFR

AutoCAD SHX TextLF

AutoCAD SHX TextMAX

AutoCAD SHX TextMECH

AutoCAD SHX TextMDF

AutoCAD SHX TextLTG

AutoCAD SHX TextMAT

AutoCAD SHX TextJT

AutoCAD SHX TextLAM

AutoCAD SHX TextMOUNTING HEIGHTS PER 2009 ANSI A117.1

AutoCAD SHX TextTEMPERED

AutoCAD SHX TextTOILET PAPER HOLDER

AutoCAD SHX TextUNLESS NOTED OTHERWISE

AutoCAD SHX TextVINYL COMPOSITION TILE

AutoCAD SHX TextWEST/WATT/WIDTH

AutoCAD SHX TextWITHOUT

AutoCAD SHX TextWITH

AutoCAD SHX TextVENEER

AutoCAD SHX TextVERTICAL

AutoCAD SHX TextVOLTAGE

AutoCAD SHX TextVARIES

AutoCAD SHX TextTYPICAL

AutoCAD SHX TextSUSPENDED

AutoCAD SHX TextSHEET METAL

AutoCAD SHX TextSANITARY NAPKIN DISPENSER

AutoCAD SHX TextTELEPHONE

AutoCAD SHX TextSTORAGE

AutoCAD SHX TextSTANDARD

AutoCAD SHX TextSTEEL

AutoCAD SHX TextSQUARE

AutoCAD SHX TextSECTION

AutoCAD SHX TextSHEET

AutoCAD SHX TextSIMILAR

AutoCAD SHX TextRUBBER BASE

AutoCAD SHX TextREFRIGERATOR

AutoCAD SHX TextREINFORCING

AutoCAD SHX TextREVISION/REVERSE

AutoCAD SHX TextROUGH OPENING

AutoCAD SHX TextSOLID CORE WOOD

AutoCAD SHX TextSOAP DISPENSER

AutoCAD SHX TextSEALANT

AutoCAD SHX TextSOUTH

AutoCAD SHX TextSCHEDULE

AutoCAD SHX TextREQUIRED

AutoCAD SHX TextROOM

AutoCAD SHX TextON CENTER

AutoCAD SHX TextNOT TO SCALE

AutoCAD SHX TextPLASTIC LAMINATE

AutoCAD SHX TextPAIR

AutoCAD SHX TextPAINT

AutoCAD SHX TextRADIUS

AutoCAD SHX TextPLYWOOD

AutoCAD SHX TextPOLISHED

AutoCAD SHX TextOPPOSITE

AutoCAD SHX TextPLATE

AutoCAD SHX TextOPENING

AutoCAD SHX TextMEDIUM

AutoCAD SHX TextMANUFACTURER

AutoCAD SHX TextMISCELLANEOUS

AutoCAD SHX TextMASONRY OPENING

AutoCAD SHX TextNOT APPLICABLE

AutoCAD SHX TextNOT IN CONTRACT

AutoCAD SHX TextNON COMBUSTIBLE

AutoCAD SHX TextNUMBER

AutoCAD SHX TextNOMINAL

AutoCAD SHX TextNORTH

AutoCAD SHX TextMOUNTED

AutoCAD SHX TextMETAL

AutoCAD SHX TextLINEAR FOOT

AutoCAD SHX TextMECHANICAL

AutoCAD SHX TextMEDIUM DENSITY FIBERBOARD

AutoCAD SHX TextMAXIMUM

AutoCAD SHX TextLIGHTING

AutoCAD SHX TextMATERIAL

AutoCAD SHX TextJOINT

AutoCAD SHX TextLAMINATE

AutoCAD SHX Text32" MIN. CLR.


AutoCAD SHX Text42"

AutoCAD SHX Text42"

AutoCAD SHX Text12"

AutoCAD SHX Text12"

AutoCAD SHX Text15"

AutoCAD SHX Text15"

AutoCAD SHX Text36"

AutoCAD SHX Text36"

AutoCAD SHX TextFORWARD APPROACH

AutoCAD SHX Text15"

AutoCAD SHX Text15"

AutoCAD SHX Text19"

AutoCAD SHX Text19"

AutoCAD SHX Text17"

AutoCAD SHX Text17"

AutoCAD SHX TextCLEAR FLOOR AREA

AutoCAD SHX Text15"

AutoCAD SHX Text15"

AutoCAD SHX Text17"

AutoCAD SHX Text17"



AutoCAD SHX TextMOUNTING HEIGHTS PER 2009 ANSI A117.1

AutoCAD SHX TextA.D.A. REQUIREMENTS PER 2009 ANSI A117.1

AutoCAD SHX TextGRAB BAR

AutoCAD SHX TextTOWEL DISP.

AutoCAD SHX TextTISSUE DISP.

AutoCAD SHX TextSOAP TRAY

AutoCAD SHX TextSOAP DISP.

AutoCAD SHX TextTOWEL BAR

AutoCAD SHX TextMIRROR

AutoCAD SHX Text42" GRAB BAR

AutoCAD SHX TextTOILET TISSUE DISPENSER



AutoCAD SHX TextMIRROR

AutoCAD SHX Text59"x60" W.C. CLR. FLR. AREA

AutoCAD SHX Text60" DIA. CLR. FLOOR AREA

AutoCAD SHX Text30"x48" LAV. CLR. FLR. AREA

AutoCAD SHX Text42"

AutoCAD SHX Text42"

AutoCAD SHX Text12"

AutoCAD SHX Text12"

AutoCAD SHX Text15"

AutoCAD SHX Text15"

AutoCAD SHX Text36"

AutoCAD SHX Text36"

AutoCAD SHX Text59"x60" W.C. CLR. FLR. AREA

AutoCAD SHX Text60" DIA. CLR. FLOOR AREA

AutoCAD SHX Text30"x48" LAV. CLR. FLR. AREA

AutoCAD SHX TextTOILET PAPER DISP.

AutoCAD SHX TextTOWEL DISP.

AutoCAD SHX TextSOAP DISH

AutoCAD SHX TextLAV. SHELF

AutoCAD SHX TextSHOWER CURTAIN ROD

AutoCAD SHX TextDUPLEX RECEPT.

AutoCAD SHX TextFIRE EXT. CABINET

AutoCAD SHX TextWALL MTD. TELEPHONE

AutoCAD SHX TextINTERCOM

AutoCAD SHX TextCLOTHES HOOK



AutoCAD SHX TextHEIGHT REQ.'MTS.

AutoCAD SHX TextSERVICE COUNTER

AutoCAD SHX TextSIDE APPROACH


AutoCAD SHX TextROOM NAME

AutoCAD SHX TextWDA5

AutoCAD SHX Text6

AutoCAD SHX TextWINDOW TYPE

AutoCAD SHX TextDOOR NUMBER

AutoCAD SHX TextREVISION

AutoCAD SHX TextROOM NAME AND NUMBER

AutoCAD SHX TextINTERIOR ELEVATION INDICATOR

AutoCAD SHX TextINDICATOR

AutoCAD SHX TextBUILDING SECTION

AutoCAD SHX TextEXTERIOR ELEVATION INDICATOR

AutoCAD SHX TextDETAIL INDICATOR

AutoCAD SHX TextSECTION INDICATOR

AutoCAD SHX TextFLOOR MOUNTED

AutoCAD SHX TextWATER CLOSET

AutoCAD SHX TextWALL HUNG


AutoCAD SHX TextDRINKING FOUNTAIN

AutoCAD SHX TextWALL TYPE INDICATOR

AutoCAD SHX TextDATUM INDICATOR

AutoCAD SHX Text5

AutoCAD SHX TextGRID LINE

AutoCAD SHX TextNORTH ARROW

AutoCAD SHX TextB

AutoCAD SHX TextN

AutoCAD SHX TextGENERAL DETAILS

AutoCAD SHX TextGENERAL NOTES

AutoCAD SHX Text1. THE CONTRACTOR SHALL VISIT THE PROJECT SITE, INVESTIGATE AND BECOME FAMILIAR WITH ALL EXISTING CONDITIONS, PRIOR TO PRICING THE PROJECT. ADDITIONAL COSTS WILL NOT BE AWARDED THE CONTRACTOR SHALL VISIT THE PROJECT SITE, INVESTIGATE AND BECOME FAMILIAR WITH ALL EXISTING CONDITIONS, PRIOR TO PRICING THE PROJECT. ADDITIONAL COSTS WILL NOT BE AWARDED FOR EXISTING CONDITIONS WHICH ARE VISIBLE AND/OR CAN BE REASONABLY ANTICIPATED. 2. G.C. IS RESPONSIBLE FOR VERIFYING ALL DIMENSIONS, EXISTING CONDITIONS, ETC. PRIOR TO CONSTRUCTION AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES THAT COULD AFFECT THE DESIGN G.C. IS RESPONSIBLE FOR VERIFYING ALL DIMENSIONS, EXISTING CONDITIONS, ETC. PRIOR TO CONSTRUCTION AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES THAT COULD AFFECT THE DESIGN AND FINISH-OUT OF THE CONSTRUCTION. G.C. SHALL CONTACT THE ARCHITECT IMMEDIATELY SHOULD ANY DISCREPANCIES OCCUR. 3. THESE DRAWINGS ARE PREPARED TO SCALE. HOWEVER, DIMENSIONS ARE NOT TO BE DERIVED BY SCALING THE PLANS, SECTIONS OR DETAILS. IF THERE IS ANY QUESTION ABOUT DETAILS OR THESE DRAWINGS ARE PREPARED TO SCALE. HOWEVER, DIMENSIONS ARE NOT TO BE DERIVED BY SCALING THE PLANS, SECTIONS OR DETAILS. IF THERE IS ANY QUESTION ABOUT DETAILS OR DIMENSIONS, CONTACT THE ARCHITECT FOR INFORMATION. 4. ALL APPLICATIONS FOR PAYMENT AND CHANGE ORDER REQUESTS MUST BE SUBMITTED USING CERTIFIED AIA DOCUMENTATION AND FORMS. ALL SUBMITTALS USING DOCUMENTATION OTHER THAN ALL APPLICATIONS FOR PAYMENT AND CHANGE ORDER REQUESTS MUST BE SUBMITTED USING CERTIFIED AIA DOCUMENTATION AND FORMS. ALL SUBMITTALS USING DOCUMENTATION OTHER THAN SPECIFIED ABOVE WILL NOT BE ACCEPTED FOR REVIEW BY ARCHITECT. NOT BE ACCEPTED FOR REVIEW BY ARCHITECT. BE ACCEPTED FOR REVIEW BY ARCHITECT. 5. IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO ENSURE THAT ALL SUBS AND MISC. PARTICIPANTS, IN THE CONSTRUCTION OF THIS PROJECT, SHALL HAVE A COMPLETE SET OF ALL CURRENT IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO ENSURE THAT ALL SUBS AND MISC. PARTICIPANTS, IN THE CONSTRUCTION OF THIS PROJECT, SHALL HAVE A COMPLETE SET OF ALL CURRENT DRAWINGS AS DISTRIBUTED BY OWNER, ARCHITECT, OR GOVERNMENTAL AUTHORITIES. THE CONTRACTOR SHALL MAINTAIN A SET OF PERMITTED DRAWINGS AS OBTAINED FROM GOVERNMENT AUTHORITIES DURING PERMIT ACQUISITION ON SITE AT ALL TIMES FOR THE REFERENCE OF ALL PARTICIPANTS INVOLVED. 6. G.C. SHALL BE RESPONSIBLE FOR ALL CONSTRUCTION MEANS, METHODS, TECHNIQUES, SEQUENCES AND PROCEDURES, INCLUDING BUT NOT LIMITED TO, TEMPORARY & PERMANENT BEAMS & LINTELS, G.C. SHALL BE RESPONSIBLE FOR ALL CONSTRUCTION MEANS, METHODS, TECHNIQUES, SEQUENCES AND PROCEDURES, INCLUDING BUT NOT LIMITED TO, TEMPORARY & PERMANENT BEAMS & LINTELS, SHORING OF EXISTING CONSTRUCTION, AND FOR SAFETY PRECAUTIONS AND PROGRAMS AS THEY RELATE TO THE WORK OF THE PROJECT. 7. ALL CONSTRUCTION SHALL COMPLY WITH ALL APPLICABLE CITY AND STATE CODES AND STANDARDS. ALL CONSTRUCTION SHALL COMPLY WITH ALL APPLICABLE CITY AND STATE CODES AND STANDARDS. 8. ALL ELEVATIONS ARE GIVEN RELATIVE TO 0'-0" A.F.F. ALL ELEVATIONS ARE GIVEN RELATIVE TO 0'-0" A.F.F. 9. ALL DIMENSIONS ARE TO STRUCTURE (SEE WALL TYPES, SCHEDULES, & DETAILS FOR FINISHES). ALL DIMENSIONS ARE TO STRUCTURE (SEE WALL TYPES, SCHEDULES, & DETAILS FOR FINISHES). 10. THE CONTRACTOR SHALL PAY FOR AND OBTAIN ALL REQUIRED PERMITS AND CERTIFICATES OF OCCUPANCY. THE CONTRACTOR SHALL PAY FOR AND OBTAIN ALL REQUIRED PERMITS AND CERTIFICATES OF OCCUPANCY. 11. ITEMS TO BE SUPPORTED FROM TOP CHORD OF JOISTS/TRUSSES OR ANY STRUCTURAL MEMBERS . DO NOT SUSPEND ITEMS FROM BOTTOM CHORD WITHOUT SPECIFIC APPROVAL FROM SHELL ITEMS TO BE SUPPORTED FROM TOP CHORD OF JOISTS/TRUSSES OR ANY STRUCTURAL MEMBERS . DO NOT SUSPEND ITEMS FROM BOTTOM CHORD WITHOUT SPECIFIC APPROVAL FROM SHELL ARCHITECT / ENG. DO NOT ALTER ANY STRUCTURAL ELEMENTS WITHOUT WRITTEN APPROVAL FROM THE ARCHITECT. 12. SHORE AND BRACE ALL EXCAVATIONS IN ACCORDANCE WITH CITY, STATE, & O.S.H.A. REQUIREMENTS. SHORE AND BRACE ALL EXCAVATIONS IN ACCORDANCE WITH CITY, STATE, & O.S.H.A. REQUIREMENTS. 13. IF CHANGES OCCUR THROUGHOUT ANY PHASE OF CONSTRUCTION, THE CONTRACTOR SHALL ISSUE, TO THE ARCHITECT, A SYSTEMATIC BREAKDOWN OF ALL SUBSEQUENT COSTS IN WRITING PRIOR IF CHANGES OCCUR THROUGHOUT ANY PHASE OF CONSTRUCTION, THE CONTRACTOR SHALL ISSUE, TO THE ARCHITECT, A SYSTEMATIC BREAKDOWN OF ALL SUBSEQUENT COSTS IN WRITING PRIOR TO THE ISSUANCE OF A REQUEST OF CHANGE ORDER APPROVAL. 14. ALL SIGNAGE IS SHOWN FOR REFERENCE ONLY. SIGNAGE SHALL BE PERMITTED UNDER SEPARATE COVER BY TENANT. ALL SIGNAGE IS SHOWN FOR REFERENCE ONLY. SIGNAGE SHALL BE PERMITTED UNDER SEPARATE COVER BY TENANT. 15. THE CONTRACTOR SHALL PROVIDE THE ARCHITECT WITH SHOP DRAWINGS PRIOR TO ANY FABRICATION OR PLACEMENT OF MATERIALS. SHOP DRAWINGS SHALL BE REVIEWED AND APPROVED BY THE CONTRACTOR SHALL PROVIDE THE ARCHITECT WITH SHOP DRAWINGS PRIOR TO ANY FABRICATION OR PLACEMENT OF MATERIALS. SHOP DRAWINGS SHALL BE REVIEWED AND APPROVED BY THE G.C. PRIOR TO SUBMISSION TO THE ARCHITECT AND SHALL BEAR THE CONTRACTORS STAMP ATTESTING TO THE SAME. DRAWINGS NOT SO MARKED WILL BE RETURNED WITHOUT REVIEW. THE REVIEW OF SHOP DRAWINGS BY THE ARCHITECT / ENGINEER IS FOR GENERAL COMPLIANCE WITH THE DRAWINGS AND SPECIFICATIONS. THIS REVIEW DOES NOT GUARANTEE IN ANY WAY THAT THE SHOP DRAWINGS ARE CORRECT NOR DOES IT INFER THAT THEY SUPERCEDE THE DRAWINGS OR SPECIFICATIONS. THE CONTRACTOR SHALL ALLOW TWO WEEKS FOR REVIEW OF THE DRAWINGS BY THE ARCHITECT / ENGINEER. 16. G.C. IS RESPONSIBLE FOR COORDINATING THE WORK OF ALL UTILITY COMPANIES AND PERFORMING ALL WORK REQUIRED BY THEM TO COMPLETE THEIR INSTALLATION. G.C. IS RESPONSIBLE FOR G.C. IS RESPONSIBLE FOR COORDINATING THE WORK OF ALL UTILITY COMPANIES AND PERFORMING ALL WORK REQUIRED BY THEM TO COMPLETE THEIR INSTALLATION. G.C. IS RESPONSIBLE FOR INSURING PROPER COMPACTION OF UTILITY COMPANY TRENCHES. 17. FOR PROJECTS WITH PHASED CONSTRUCTION, THE G.C. SHALL PROVIDE TEMPORARY BARRICADE AS PER LOCAL REQUIREMENTS.FOR PROJECTS WITH PHASED CONSTRUCTION, THE G.C. SHALL PROVIDE TEMPORARY BARRICADE AS PER LOCAL REQUIREMENTS.

AutoCAD SHX TextGENERAL

AutoCAD SHX Text1. G.C. TO PROVIDE ALL BLOCKING NECESSARY FOR ALL EQUIPMENT, RAILINGS ETC. AS SHOWN ON DRAWINGS - ALL WOOD BLOCKING, NAILERS, ETC. MUST BE FIRE RETARDANT TREATED. G.C. TO PROVIDE ALL BLOCKING NECESSARY FOR ALL EQUIPMENT, RAILINGS ETC. AS SHOWN ON DRAWINGS - ALL WOOD BLOCKING, NAILERS, ETC. MUST BE FIRE RETARDANT TREATED. 2. GLAZING IN ENTRANCE DOORS AND ADJACENT MUST BE TEMPERED. GLAZING IN ENTRANCE DOORS AND ADJACENT MUST BE TEMPERED. 3. TOILETS MUST BE APPROPRIATELY IDENTIFIED "MEN" & "WOMEN" (G.C. TO PROVIDE WALL MOUNTED SIGNAGE TO COMPLY WITH ADA.) TOILETS MUST BE APPROPRIATELY IDENTIFIED "MEN" & "WOMEN" (G.C. TO PROVIDE WALL MOUNTED SIGNAGE TO COMPLY WITH ADA.) 4. G.C. TO PROVIDE ELECTRICAL ROOM(S) WITH LABELING ACCORDING TO THE IFC WITH MINIMUM CHARACTER SIZE OF 4". G.C. TO PROVIDE ELECTRICAL ROOM(S) WITH LABELING ACCORDING TO THE IFC WITH MINIMUM CHARACTER SIZE OF 4". 5. G.C. TO POST PHYSICAL ADDRESS IN PLAIN SIGHT AS PER LOCAL REQUIREMENTS WITH MINIMUM HEIGHT OF 4". G.C. TO POST PHYSICAL ADDRESS IN PLAIN SIGHT AS PER LOCAL REQUIREMENTS WITH MINIMUM HEIGHT OF 4". 6. CONTRACTOR TO COORDINATE ALL REQUIRED MILLWORK BLOCKING WITH MILLWORK MANUFACTURER/ MILLWORK DRAWINGS. CONTRACTOR TO COORDINATE ALL REQUIRED MILLWORK BLOCKING WITH MILLWORK MANUFACTURER/ MILLWORK DRAWINGS. 7. CONTRACTOR TO PROVIDE CONTROL JOINTS IN ANY DRYWALL SURFACE THAT EXCEEDS 30 LINEAR FEET IN EITHER DIRECTION. CONTRACTOR TO SUBMIT PROPOSED LOCATIONS FOR APPROVAL CONTRACTOR TO PROVIDE CONTROL JOINTS IN ANY DRYWALL SURFACE THAT EXCEEDS 30 LINEAR FEET IN EITHER DIRECTION. CONTRACTOR TO SUBMIT PROPOSED LOCATIONS FOR APPROVAL PRIOR TO INSTALLATION. 8. SEE SHEET G1 FOR ACCESSIBLE REQUIREMENTS, DETAILS & MORE INFO. SEE SHEET G1 FOR ACCESSIBLE REQUIREMENTS, DETAILS & MORE INFO. 10. ALL GWB TO BE TYPE X. PROVIDE MOISTURE RESISTANT GWB & EPOXY PAINT ON WALLS & WET LOCATIONS (I.E. RESTROOM AREAS, KITCHEN AREAS, ETC) ALL GWB TO BE TYPE X. PROVIDE MOISTURE RESISTANT GWB & EPOXY PAINT ON WALLS & WET LOCATIONS (I.E. RESTROOM AREAS, KITCHEN AREAS, ETC) 11. FOR WALLS WITH METAL STUD FRAMING, PROVIDE BRIDGING AT 48" O.C AND PROVIDE TWO (2) 16 GAUGE METAL STUDS AT ALL INTERIOR DOORS. FOR WALLS WITH METAL STUD FRAMING, PROVIDE BRIDGING AT 48" O.C AND PROVIDE TWO (2) 16 GAUGE METAL STUDS AT ALL INTERIOR DOORS. 12. ALL EXPOSED INSULATION TO BE FOIL-FACED. PAPER-FACED INSULATION CAN ONLY BE USED IF CONCEALED. ALL EXPOSED INSULATION TO BE FOIL-FACED. PAPER-FACED INSULATION CAN ONLY BE USED IF CONCEALED. 13. CEILING TILE GRIDS SHALL BE CENTERED IN ROOMS UNLESS OTHERWISE NOTED. 4" MINIMUM TILE SHALL BE USED AT ALL AREAS WHERE CEILING GRID TERMINATES. IF LESS THAN 4", G.C. SHALL CUT CEILING TILE GRIDS SHALL BE CENTERED IN ROOMS UNLESS OTHERWISE NOTED. 4" MINIMUM TILE SHALL BE USED AT ALL AREAS WHERE CEILING GRID TERMINATES. IF LESS THAN 4", G.C. SHALL CUT A 2X4 TILE TO THE REQUIRED LENGTH. 14. ALL FIRE RATED PARTITIONS TO BE LABELED (STENCILED) WITH RATING AT 48" O.C. MIN ABOVE CEILING AS REQUIRED BY CODE. ALL FIRE RATED PARTITIONS TO BE LABELED (STENCILED) WITH RATING AT 48" O.C. MIN ABOVE CEILING AS REQUIRED BY CODE. 15. ALL MASONRY SHALL BE LAID IN RUNNING BOND UNLESS OTHERWISE NOTED WITH FULL HEAD AND BED JOINTS. MAINTAIN A MINIMUM 1" CLEAR AIRSPACE BEHIND MASONRY. PROVIDE FLASHING AND ALL MASONRY SHALL BE LAID IN RUNNING BOND UNLESS OTHERWISE NOTED WITH FULL HEAD AND BED JOINTS. MAINTAIN A MINIMUM 1" CLEAR AIRSPACE BEHIND MASONRY. PROVIDE FLASHING AND WEEP HOLES AT 32" O.C. AT ALL INTERUPTIONS TO DOWNLOAD FLOW OF WATER. PROVIDE MORTAR NET AT ALL FLASHING LOCATIONS. TURN UP AND SEAL BACK OF FLASHING BEHIND BUILDING WRAP. SECURE MASONRY TO STUDS STRUCTURE WITH MASONRY ANCHORS AT 32" O.C. HORIZONTAL AND 16" O.C. VERTICAL DECREASE INTERVAL AT OPENINGS BY HALF.

AutoCAD SHX TextARCHITECTURAL

AutoCAD SHX Text1. CONTRACTOR SHALL COORDINATE ALL MECHANICAL, ELECTRICAL AND PLUMBING INFORMATION WITH THE ARCHITECTURAL DRAWINGS IN THEIR ENTIRETY, TO INSURE THE PROPER AND DESIRED CONTRACTOR SHALL COORDINATE ALL MECHANICAL, ELECTRICAL AND PLUMBING INFORMATION WITH THE ARCHITECTURAL DRAWINGS IN THEIR ENTIRETY, TO INSURE THE PROPER AND DESIRED INSTALLATION OF ALL SYSTEMS SPECIFIED WITHIN THE CONSTRUCTION DOCUMENTS. 2. ALL EQUIPMENT OPERATIONAL HARDWARE AND LIGHTING (I.E. CONTROLS AND SWITCHES) MUST BE APPROVED BY ARCHITECT PRIOR TO INSTALLATION. ALL EQUIPMENT OPERATIONAL HARDWARE AND LIGHTING (I.E. CONTROLS AND SWITCHES) MUST BE APPROVED BY ARCHITECT PRIOR TO INSTALLATION. 3. ALL FINISH OUT ELECTRICAL COVER PLATES SHALL BE STAINLESS STEEL W/ GRAY SWITCHES AND OUTLETS. ALL FINISH OUT ELECTRICAL COVER PLATES SHALL BE STAINLESS STEEL W/ GRAY SWITCHES AND OUTLETS.

AutoCAD SHX TextENGINEERING

AutoCAD SHX Text1. FOR PROJECTS THAT ARE TO RECEIVE AN AUTOMATIC SPRINKLER SYSTEM, THE G.C. SHALL SECURE A COMPLETE SET OF CONSTRUCTION DRAWINGS AND COORDINATE THE LOCATION OF FOR PROJECTS THAT ARE TO RECEIVE AN AUTOMATIC SPRINKLER SYSTEM, THE G.C. SHALL SECURE A COMPLETE SET OF CONSTRUCTION DRAWINGS AND COORDINATE THE LOCATION OF SPRINKLERS WITH THE WORK OF OTHER TRADES. SPRINKLER HEADS SHALL BE SPACED IN ACCORDANCE WITH NFPA-13 AND THE MANUFACTURES APPROVAL LISTING. PLANS SHALL TERMINATE THE HYDRAULIC CALCULATIONS AT THE CITY CONNECTION MINIMUM. INDICATE ON DRAWINGS ALL UNDERGROUND PIPE AND FITTINGS BOTH NEW AND EXISTING. SPRINKLER HEAD SPACING SHALL NOT EXCEED 225 SF PER HEAD FOR LIHT HAZARD OCCUPANCIES, 130 SF PER HEAD FOR ORDINARY HAZARD OCCUPANCIES AND 324 SF PER HEAD FOR QUICK RESPONSE EXTENDED COVERAGE. DESIGN DENSITY FOR LIGHT HAZARD SHALL BE .10/1500 + 100 HOSE MINIMUM. ALL ORDINARY HAZARD AREAS SHALL BE BASED UPON GROUP I AND SHALL PROVIDE A DESIGN DENSITY OF .15/100 + 250 HOSE MINIMUM. ALL FIRE PROTECTION / SPRINKLER WORK SHALL BE IN STRICT CONFORMANCE WITH OSFM AND NFPA CODE REQUIREMENTS. 2. PLANS FOR SPRINKLER SYSTEM AND FIRE ALARM SYSTEM WILL NEED TO BE SUBMITTED FOR REVIEW BEFORE CONSTRUCTION. PLANS FOR SPRINKLER SYSTEM AND FIRE ALARM SYSTEM WILL NEED TO BE SUBMITTED FOR REVIEW BEFORE CONSTRUCTION. 3. KNOX BOX TO BE INSTALLED BY GENERAL CONTRACTOR. QUANTITIES AND LOCATIONS TO BE DETERMINED BY FIRE DEPARTMENT OFFICIAL. KNOX BOX TO BE INSTALLED BY GENERAL CONTRACTOR. QUANTITIES AND LOCATIONS TO BE DETERMINED BY FIRE DEPARTMENT OFFICIAL. 4. FIRE EXTINGUISHERS TO BE PROVIDED AND INSTALLED BY GENERAL CONTRACTOR. QUANTITIES AND LOCATIONS TO BE DETERMINED BY FIRE DEPARTMENT OFFICIAL.FIRE EXTINGUISHERS TO BE PROVIDED AND INSTALLED BY GENERAL CONTRACTOR. QUANTITIES AND LOCATIONS TO BE DETERMINED BY FIRE DEPARTMENT OFFICIAL.

AutoCAD SHX TextFIRE PROTECTION

AutoCAD SHX Text1. THE GENERAL CONTRACTOR SHALL NOTIFY OWNER/ ARCHITECT IMMEDIATELY IF THE SPACE IS NOT ASBESTOS FREE. THE GENERAL CONTRACTOR SHALL NOTIFY OWNER/ ARCHITECT IMMEDIATELY IF THE SPACE IS NOT ASBESTOS FREE. 2. G.C. TO PROVIDE ALL DEMOLITION AS REQUIRED FOR PROPOSED NEW WORK. G.C. IS TO VISIT THE SITE PRIOR TO SUBMITTING A BID IN ORDER TO DETERMINE IF ANY ADDITIONAL DEMOLITION COSTS G.C. TO PROVIDE ALL DEMOLITION AS REQUIRED FOR PROPOSED NEW WORK. G.C. IS TO VISIT THE SITE PRIOR TO SUBMITTING A BID IN ORDER TO DETERMINE IF ANY ADDITIONAL DEMOLITION COSTS ARE NEEDED THAT ARE NOT INDICATED ON THE DRAWINGS. 3. GENERAL CONTRACTOR SHALL PROPERLY DISPOSE OF ALL DEMOLISHED MATERIALS OFF SITE OR AS DIRECTED BY OWNER / ARCHITECT. GENERAL CONTRACTOR SHALL PROPERLY DISPOSE OF ALL DEMOLISHED MATERIALS OFF SITE OR AS DIRECTED BY OWNER / ARCHITECT. 4. ALL INFORMATION RELATED TO EXISTING CONDITIONS HAS BEEN PROVIDED BY THE OWNER. IT IS EACH CONTRACTOR'S RESPONSIBILITY TO VERIFY ALL EXISTING CONDITIONS PRIOR TO BEGINNING ALL INFORMATION RELATED TO EXISTING CONDITIONS HAS BEEN PROVIDED BY THE OWNER. IT IS EACH CONTRACTOR'S RESPONSIBILITY TO VERIFY ALL EXISTING CONDITIONS PRIOR TO BEGINNING WORK AND AS WORK PROGRESSES. ANY DISCREPANCIES FOUND SHALL BE BROUGHT TO THE ATTENTION OF THE ARCHITECT PRIOR TO PROCEEDING FURTHER. 5. THE REMOVAL OF ANY EQUIPMENT, PIPING ETC. WHICH PENETRATES THROUGH THE ROOF SHALL BE DONE IN COORDINATION WITH THE OWNER/ARCHITECT AS NOT TO VOID EXISTING ROOFING THE REMOVAL OF ANY EQUIPMENT, PIPING ETC. WHICH PENETRATES THROUGH THE ROOF SHALL BE DONE IN COORDINATION WITH THE OWNER/ARCHITECT AS NOT TO VOID EXISTING ROOFING WARRANTIES. 6. G.C. SHALL BE RESPONSIBLE FOR THE PROTECTION AND SAFE KEEPING OF ALL ITEMS TO BE REUSED G.C. SHALL BE RESPONSIBLE FOR THE PROTECTION AND SAFE KEEPING OF ALL ITEMS TO BE REUSED 7. G.C. SHALL DEMOLISH & REMOVE EXISTING WALLS & MILLWORK AS REQUIRED FOR NEW CONSTRUCTION. G.C. SHALL TERMINATE ALL MECHANICAL, ELECTRICAL, AND PLUMBING AS REQUIRED FOR NEW G.C. SHALL DEMOLISH & REMOVE EXISTING WALLS & MILLWORK AS REQUIRED FOR NEW CONSTRUCTION. G.C. SHALL TERMINATE ALL MECHANICAL, ELECTRICAL, AND PLUMBING AS REQUIRED FOR NEW CONSTRUCTION. REMOVE PLUMBING FIXTURES AND CAP OFF WASTE LINES FLUSH WITH FLOOR - SUPPLY LINES TO BE CAPPED OFF ABOVE CEILING. COORDINATE WITH PLUMBING PLANS. 8. G.C. TO COORDINATE REMOVAL OF ALL EXISTING FINISHES TO BE REMOVED FOR NEW FINISHES. G.C. TO COORDINATE REMOVAL OF ALL EXISTING FINISHES TO BE REMOVED FOR NEW FINISHES. 9. CONTRACTOR TO DOCUMENT ALL EXISTING CONDITIONS . PROVIDE OWNER, ARCHITECT AND CONSTRUCTION MANAGER W/ (1) SET OF EXISTING CONDITIONS PICTURES. CONTRACTOR TO MAINTAIN A CONTRACTOR TO DOCUMENT ALL EXISTING CONDITIONS . PROVIDE OWNER, ARCHITECT AND CONSTRUCTION MANAGER W/ (1) SET OF EXISTING CONDITIONS PICTURES. CONTRACTOR TO MAINTAIN A SECURE BUILDING AFTER HOURS AND IS RESPONSIBLE FOR ANY DAMAGE OR LOSS OCCURRED THEREIN. 10. G.C. SHALL NOT CUT AND PATCH WORK IN A MANNER THAT WOULD RESULT IN SUBSTANTIAL VISUAL EVIDENCE OF CUT AND PATCH WORK. USE MATERIALS FOR CUTTING AND PATCHING THAT ARE G.C. SHALL NOT CUT AND PATCH WORK IN A MANNER THAT WOULD RESULT IN SUBSTANTIAL VISUAL EVIDENCE OF CUT AND PATCH WORK. USE MATERIALS FOR CUTTING AND PATCHING THAT ARE IDENTICAL TO EXISTING MATERIALS. PATCH SUB FLOOR THROUGHOUT TO CREATE A SMOOTH, LEVEL, SURFACE READY FOR TENANT'S FLOOR COVERING.PATCH SUB FLOOR THROUGHOUT TO CREATE A SMOOTH, LEVEL, SURFACE READY FOR TENANT'S FLOOR COVERING.

AutoCAD SHX TextDEMOLITION


AutoCAD SHX TextCONTROL AREA

AutoCAD SHX TextSHOWER SEAT DESIGN

AutoCAD SHX TextTYPICAL RESTROOM CLEARANCES

AutoCAD SHX TextTYPICAL ACCESSIBLE RESTROOM CLEARANCES

AutoCAD SHX Text ACCESSIBLE TRANSFER SHOWER CLEARANCES

AutoCAD SHX Text12"

AutoCAD SHX Text12"

AutoCAD SHX Text12"H MAX. THRESHOLD PER ANSI.A117.1.2009 608.6














EXISTING BUILDING

G2

-- - - - - - -

--

- -

1 - -1

1111

11

1 1

1 1

- -

- -

SEE MECHANICAL

SEE ELECTRICAL

G2

2G2

FIRST FLOOR LIFE SAFETY PLANN.T.S.

APPENDIX BLIFE SAFETY PLAN

S H E E T T I T L E


ARCHITECTS

P HA L

I S S U E D A T E

857

BELM

ON

T AV

E

1G2

GROUND FLOOR LIFE SAFETY PLANN.T.S.

AutoCAD SHX Text857 BELMONT AVE CHARLOTTE NC

AutoCAD SHX Text28205

AutoCAD SHX Text704 351 7208


AutoCAD SHX TextA.ROWEROWE

AutoCAD SHX TextMECLKENBURG

AutoCAD SHX TextAROWE@DCG- CONSTRUCTION.COM

AutoCAD SHX TextPFAHL ARCHITECTS

AutoCAD SHX TextCAROLINE PFAHL 13559 704 607-3566 [email protected]

AutoCAD SHX TextPFAHL ARCHITECTS

AutoCAD SHX TextALLIED CONSULTING ENGINEERS

AutoCAD SHX TextDEAN BELK 20607 704 399-3943 [email protected]

AutoCAD SHX TextJ. DAVID HOOD 030549 704 399-3943 [email protected]

AutoCAD SHX Text3368 SF

AutoCAD SHX Text1

AutoCAD SHX TextBUSINESS


AutoCAD SHX Text19,000

AutoCAD SHX Text55'

AutoCAD SHX Text21'-6" @ TALLEST

AutoCAD SHX Text3

AutoCAD SHX Text2

AutoCAD SHX TextUPFIT SF


AutoCAD SHX Text504.4

AutoCAD SHX Text0

AutoCAD SHX Text504.3



AutoCAD SHX TextN/A



AutoCAD SHX TextJ. DAVID HOOD 030549 704 399-3943 [email protected]

AutoCAD SHX TextMICHAEL R. LOVE 11630 704 654-0324 [email protected]

AutoCAD SHX TextMICHAEL R. LOVE, P.E.




AutoCAD SHX TextN/A






AutoCAD SHX TextGROUND




AutoCAD SHX TextN/A



AutoCAD SHX TextMDV ENGINEERING

AutoCAD SHX TextMICHAEL NEWMAN 28274 704 400-1044 [email protected]

AutoCAD SHX TextTENANT A: BUSINESS 1732 SF @ 100 GROSS SF PER OCC = 18 OCCUPANTS


AutoCAD SHX TextEXISTING ACCESSIBLE ENTRY

AutoCAD SHX TextNEW ACCESSIBLE ENTRY

AutoCAD SHX Text51'-6 3/4"


AutoCAD SHX Text49'-7" TRAVEL DISTANCE



AutoCAD SHX Text68' TRAVEL DISTANCE

AutoCAD SHX TextNOT AN EXIT


AutoCAD SHX TextEXIT WIDTH (20 TOTAL OCCS) 20 OCCS. 20x.2= 4" REQ. WIDTH 64" PROVIDED MAX OCC. LOAD= 320 OCCS.


AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX Text0 HR


















AutoCAD SHX TextN/A

AutoCAD SHX TextN/A




AutoCAD SHX TextNORTH- 10'-8"














AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A

AutoCAD SHX TextN/A





AutoCAD SHX TextUP,NS

AutoCAD SHX Text15%%%


AutoCAD SHX TextEAST- 57'-6"


AutoCAD SHX TextNO LIMIT


AutoCAD SHX TextSOUTH- OPEN




AutoCAD SHX TextWEST- OPEN




AutoCAD SHX Text22

AutoCAD SHX Text5

AutoCAD SHX TextUTILIZING EXISTING PARKING AREA

AutoCAD SHX Text5 EXISTING PARKING SPACES

AutoCAD SHX Text1

AutoCAD SHX Text1

AutoCAD SHX Text5

AutoCAD SHX Text1

AutoCAD SHX Text1

AutoCAD SHX Text** PER SECTION 810 OF THE NCSEBC OCCUPANCY LOAD IS NOT INCREASED BY MORE THAN 20%%%**

AutoCAD SHX TextNO DRINKING FOUNTAINS

AutoCAD SHX TextOR SERVICE SINK REQ.

AutoCAD SHX TextSEE STRUCTURAL

AutoCAD SHX TextR-25

AutoCAD SHX TextNEW MEMBRANE ROOF W R-25 RIGID ENTIRELY ABOVE DECK

AutoCAD SHX TextEXISTING TO REMAIN

AutoCAD SHX TextEXISTING TO REMAIN

AutoCAD SHX TextN/A

AutoCAD SHX TextNR

AutoCAD SHX Text4" SLAB ON GRADE

AutoCAD SHX TextN/A

AutoCAD SHX Text.45

AutoCAD SHX Text.25

AutoCAD SHX Text0

AutoCAD SHX Text.77

AutoCAD SHX Text.33

AutoCAD SHX Text.5

AutoCAD SHX TextWINDOWS WITH AWNING





AutoCAD SHX Text80'-8" TRAVEL DISTANCE (100' MAX.)

AutoCAD SHX Text63'-3" TRAVEL DISTANCE (100' MAX.)

AutoCAD SHX Text61'-4"





AutoCAD SHX TextEXIT WIDTH (12 TOTAL OCCS) 12 OCCS. 12x.2= 2.4" REQ. WIDTH 32" PROVIDED MAX OCC. LOAD= 160 OCCS.

AutoCAD SHX TextEXIT WIDTH (18 TOTAL OCCS) 18 OCCS. 18x.2= 3.6" REQ. WIDTH 32" PROVIDED MAX OCC. LOAD= 160 OCCS.














5'-0"

L

C

L

C

C

5'-0"

PE

R A

DA

C

C

L

L

L

A1DOOR AND FRAME TYPES1/4 =1'-0"

A1TRANSITIONS3"=1'-0"

1A1

PLAN1/4 =1'-0"

2

3

FIRST

A1

P HA L

857

BELM

ON

T AV

E

FLOOR PLAN

AutoCAD SHX TextA

AutoCAD SHX Text(1) LAYER 5/8" THICK TYPE X GYPSUM WALL BOARD

AutoCAD SHX Text2X6 FRAMING @ 16" O.C.

AutoCAD SHX Text(1) LAYER 5/8" THICK GYPSUM WALL BOARD

AutoCAD SHX TextDEMISING WALL

AutoCAD SHX TextR-19 FIBERGLASS SOUND BATT INSULATION

AutoCAD SHX TextWALL TYPES

AutoCAD SHX Text**EXTEND TO BOTTOM OF DECK**

AutoCAD SHX TextB


AutoCAD SHX Text2X4 FRAMING @ 16" O.C.


AutoCAD SHX TextTYPICAL WALL

AutoCAD SHX TextR-19 FIBERGLASS SOUND BATT INSULATION

AutoCAD SHX Text**EXTEND TO BOTTOM OF DECK**

AutoCAD SHX Text4" OR IF WALL IS LESS THAN 18" WIDE CENTER SIGNAGE ON WALL

AutoCAD SHX TextNOTES: 1. SIGNS SHALL BE INSTALLED ON THE WALL ADJACENT TO THE LATCH SIDE SIGNS SHALL BE INSTALLED ON THE WALL ADJACENT TO THE LATCH SIDE OF THE DOOR. WHERE THERE IS NO WALL SPACE ON THE LATCH SIDE OF THE DOOR, INCLUDING DOUBLE LEAF DOORS, SIGNS SHALL BE INSTALLED ON THE NEAREST ADJACENT WALL 2. MOUNTING HEIGHT SHALL BE 60" (5'-0") ABOVE THE FINISH FLOOR TO THE MOUNTING HEIGHT SHALL BE 60" (5'-0") ABOVE THE FINISH FLOOR TO THE CENTERLINE OF THE SIGN 3. MOUNTING LOCATION SHALL BE SUCH THAT A PERSON MAY APPROACH MOUNTING LOCATION SHALL BE SUCH THAT A PERSON MAY APPROACH WITHIN 3" OF THE SIGN WITHOUT ENCOUNTERING PROTRUDING OBJECTS OR STANDING WITHIN THE SWING OF THE DOOR

AutoCAD SHX TextBRAILLE SIGNAGE

AutoCAD SHX TextCHARACTER SIGNAGE

AutoCAD SHX TextSIGN MAY BE MOUNTED ON EITHER SIDE OF DOORS

AutoCAD SHX Text4" OR IF WALL IS LESS THAN 18" WIDE CENTER SIGNAGE ON WALL

AutoCAD SHX TextBRAILLE SIGNAGE

AutoCAD SHX TextCHARACTER SIGNAGE

AutoCAD SHX TextH-1

AutoCAD SHX TextJAMB DETAIL

AutoCAD SHX TextJ-1

AutoCAD SHX Text2X HEADER

AutoCAD SHX TextH.M. FRAME

AutoCAD SHX TextGYP. BOARD

AutoCAD SHX Text-SEE WALL TYPES

AutoCAD SHX TextHEAD DETAIL

AutoCAD SHX TextDBL 2X4 STUDS

AutoCAD SHX TextH.M. FRAME

AutoCAD SHX TextGYP. BOARD

AutoCAD SHX Text-SEE WALL TYPES

AutoCAD SHX TextDOOR ELEVATIONS

AutoCAD SHX TextDOOR FRAMES

AutoCAD SHX TextD-1

AutoCAD SHX TextA

AutoCAD SHX TextSEE

AutoCAD SHX TextSEE

AutoCAD SHX TextSEE

AutoCAD SHX TextSC WOOD DOOR

AutoCAD SHX TextHM FRAME

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextD-2

AutoCAD SHX TextD-3

AutoCAD SHX TextD-4





AutoCAD SHX TextBOLLARD

AutoCAD SHX TextCONCRETE WALK

AutoCAD SHX TextB.O. JOIST 10'-5"

AutoCAD SHX TextB.O. DECK 11'-2"



AutoCAD SHX Text857 BELMONT AVE 1ST FLOOR: +/- 3368 SF

AutoCAD SHX TextTENANT DEMISING WALL- CENTER WALL ON EXISTING COLUMN

AutoCAD SHX TextUP

AutoCAD SHX TextUP

AutoCAD SHX TextNEW METAL AWNING ABOVE

AutoCAD SHX TextNEW STOREFRONT IN EXISTING OPENING- FIELD VERIFY DIMENSIONS PRIOR TO FABRICATION

AutoCAD SHX TextNEW METAL AWING ABOVE

AutoCAD SHX TextDN

AutoCAD SHX TextPATCH EXISTING STAIR HOLE- COORD. WITH STRUCTURAL

AutoCAD SHX TextTENANT A 1ST FLOOR: +/- 1928 SF GROUND FLOOR: +/- 1932 SF TOTAL: +/- 3860 SF

AutoCAD SHX TextTENANT B 1ST FLOOR: +/- 1440 SF GROUND FLOOR: +/- 1343 SF TOTAL: +/- 2783 SF



AutoCAD SHX Text201

AutoCAD SHX TextTENANT A

AutoCAD SHX Text202

AutoCAD SHX TextTENANT B

AutoCAD SHX Text205

AutoCAD SHX TextRR

AutoCAD SHX Text204

AutoCAD SHX TextRR

AutoCAD SHX Text203

AutoCAD SHX TextRR









AutoCAD SHX Text14 T @ 11" = 12'-10"








AutoCAD SHX TextNEW STOREFRONT IN NEW OPENINGS- COORD. WITH STRUCTURAL

AutoCAD SHX TextNEW STOREFRONT IN EXPANDED OPENING- COORD. WITH STRUCTURAL



AutoCAD SHX Text1

AutoCAD SHX Text2

AutoCAD SHX Text3

AutoCAD SHX Text4

AutoCAD SHX Text101

AutoCAD SHX Text102

AutoCAD SHX Text103

AutoCAD SHX Text104

AutoCAD SHX Text105

AutoCAD SHX Text106

AutoCAD SHX Text107

AutoCAD SHX Text108

AutoCAD SHX Text1:12 SLOPE MAX.

AutoCAD SHX Text1:12 SLOPE MAX.

AutoCAD SHX TextCLEARANCE PER 603.2.2 EXCEPT. 2 ICC A117.1-2009

AutoCAD SHX TextA

AutoCAD SHX TextB

AutoCAD SHX TextB

AutoCAD SHX TextB

AutoCAD SHX TextB

AutoCAD SHX TextB

AutoCAD SHX TextPATCH EXISTING WINDOW

AutoCAD SHX Text42" H GUARDRAIL DOES NOT ALLOW PASSAGE OF 4" SPHERE & BOTTOM RAIL SHALL BE PROVIDED TO BLOCK PASSAGE OF 2" SPHERE

AutoCAD SHX Text36" H HANDRAIL



AutoCAD SHX TextDN



AutoCAD SHX Text111

AutoCAD SHX Text111

AutoCAD SHX Text111

AutoCAD SHX Text112

AutoCAD SHX Text111



AutoCAD SHX Text5

AutoCAD SHX TextREMOVE ALL EXISTING INTERIOR WALLS

AutoCAD SHX TextREMOVE ALL EXISTING INTERIOR WALLS

AutoCAD SHX TextFILL EXISTING WINDOW OPENING AS REQ. FOR NEW WALL

AutoCAD SHX TextNO PANIC HARDWARE REQ.


AutoCAD SHX TextEXTEND HANDRAIL TO FLOOR FOR SUPPORT TYP.

AutoCAD SHX TextWOOD STAIR & GUARD/HANDRAIL COORD. WITH STRUCTURAL

AutoCAD SHX TextWOOD STAIR & GUARD/HANDRAIL COORD. WITH STRUCTURAL

AutoCAD SHX TextCARPET ON FLOOR SURFACES

AutoCAD SHX TextBEVELED CHANGES IN LEVEL

AutoCAD SHX Text1

AutoCAD SHX Text2

AutoCAD SHX Text1

AutoCAD SHX Text2


AutoCAD SHX TextS H E E T T I T L E

AutoCAD SHX TextS H E E T N U M B E R







AutoCAD SHX TextARCHITECTS




AutoCAD SHX TextI S S U E D A T E




1A2

GROUND FLOOR PLAN1/4 =1'-0"

GROUND

A2

P HA L

857

BELM

ON

T AV

E

FLOOR PLAN

2A2

WINDOW ELEVATIONS1/4 =1'-0"




AutoCAD SHX TextSLIDING DOOR (TO REMAIN STATIONARY) FILL TRACK WITH CONCRETE TO MATCH FINISH FLOOR ELEVATION

AutoCAD SHX TextEXISTING 12" BLOCK WALL

AutoCAD SHX TextEXISTING 12.5"X16" BRICK PEIRS

AutoCAD SHX TextNEW STOREFRONT WINDOWS

AutoCAD SHX TextNEW STOREFRONT DOOR AND WINDOWS

AutoCAD SHX TextUP

AutoCAD SHX TextTENANT A 1ST FLOOR: +/- 1928 SF GROUND FLOOR: +/- 1932 SF TOTAL: +/- 3860 SF

AutoCAD SHX TextTENANT B 1ST FLOOR: +/- 1440 SF GROUND FLOOR: +/- 1343 SF TOTAL: +/- 2783 SF

AutoCAD SHX TextENTRY COMMON: +/- 98 SF

AutoCAD SHX TextNEW METAL AWNING ABOVE

AutoCAD SHX Text101

AutoCAD SHX TextTENANT A

AutoCAD SHX Text102

AutoCAD SHX TextTENANT B

AutoCAD SHX Text103

AutoCAD SHX TextENTRY

AutoCAD SHX TextEXISTING 12.5"X16" BRICK PEIRS

AutoCAD SHX Text6

AutoCAD SHX Text7

AutoCAD SHX Text8

AutoCAD SHX TextFILL EXISTING DOOR TRACK WITH CONCRETE FLUSH WITH EXISTING FINISH FLOOR ELEVATION

AutoCAD SHX TextENSURE EXISTING DOOR THRESHOLD IS FLUSH WITH FINISH FLOOR ELEVATION

AutoCAD SHX Text109

AutoCAD SHX Text110



AutoCAD SHX TextALIGN NEW WALL WITH EXISTING BRICK PIER

AutoCAD SHX TextADJUST RAILING AS REQ. TO AVOID EXISTING DOOR IN STATIONARY POSITION





AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextOPEN AREA FOR MECHANICAL EQUIPMENT- COORD. WITH MECHANICAL DRAWINGS

AutoCAD SHX TextOPEN AREA FOR MECHANICAL EQUIPMENT- COORD. WITH MECHANICAL DRAWINGS

AutoCAD SHX TextNEW 12" CMU WALL TO REINFORCE EXISTING CMU WALL- COORD. WITH STRUCTURAL FOR EXISTING WALL REINFORCEMENT

AutoCAD SHX TextUP

AutoCAD SHX TextOPTIONAL: REMOVE EXISTING SLAB ON GRADE AND LOWER 12" AND POUR NEW 4" SLAB OVER 6 MIL POLY VAPOR BARRIER OVER GRAVEL BASE AND COMPACTED FILL- COORD. WITH STRUCTURAL

AutoCAD SHX Text4" STEP UP

AutoCAD SHX Text4" STEP UP

AutoCAD SHX TextREMOVE RAISED CONCRETE AND REPLACE WITH 4" SLAB OVER 6 MIL POLY VAPOR BARRIER OVER GRAVEL BASE AND COMPACTED FILL AS REQ TO MATCH EXISTING FLOOR LEVEL. COORD. WITH STRUCTURAL



AutoCAD SHX TextEXTEND HANDRAIL TO FLOOR FOR SUPPORT TYP.

AutoCAD SHX TextEXTEND HANDRAIL TO WALL TYP.

















AutoCAD SHX Text101

AutoCAD SHX Text102

AutoCAD SHX Text103

AutoCAD SHX Text104

AutoCAD SHX TextALL GLASS SHALL BE TEMPERED GLASS

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT













AutoCAD SHX Text105

AutoCAD SHX Text106

AutoCAD SHX Text107

AutoCAD SHX Text108

AutoCAD SHX Text109

AutoCAD SHX Text110

AutoCAD SHX Text111

AutoCAD SHX TextMATCH EXISTING SILL HEIGHTS

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT

AutoCAD SHX TextT





AutoCAD SHX TextT

AutoCAD SHX TextT





AutoCAD SHX TextT

AutoCAD SHX TextT





AutoCAD SHX Text112

AutoCAD SHX TextT


















SCHEDULES

A3

1A3

RESTROOM ACCESSORIES 3/8" =1'-0"

P HA L

857

BELM

ON

T AV

E

AutoCAD SHX TextDOOR SCHEDULE

AutoCAD SHX TextNUMBER

AutoCAD SHX Text1

AutoCAD SHX TextSIZE


AutoCAD SHX TextELEVATION

AutoCAD SHX TextPR 3080

AutoCAD SHX TextNOTES

AutoCAD SHX TextFRAME

AutoCAD SHX TextHARDWARE *

AutoCAD SHX TextFINISH

AutoCAD SHX Text2

AutoCAD SHX Text3


AutoCAD SHX TextSC WOOD

AutoCAD SHX TextA

AutoCAD SHX TextD-1

AutoCAD SHX TextKEYED TO MASTER



AutoCAD SHX Text, PROVIDE CLOSER


AutoCAD SHX TextFINISH SCHEDULE

AutoCAD SHX TextROOM

AutoCAD SHX TextTENANT A 101

AutoCAD SHX TextWALLS

AutoCAD SHX TextFLOOR

AutoCAD SHX TextBASE

AutoCAD SHX TextCEILING

AutoCAD SHX TextOPENINGS


AutoCAD SHX TextPOLISHED CONC.

AutoCAD SHX TextRUBBER-1

AutoCAD SHX TextINT. DOOR

AutoCAD SHX TextFRAME


AutoCAD SHX TextGENERAL DOOR NOTES

AutoCAD SHX Text- ALL DOOR AND CABINET HARDWARE SHALL BE A.D.A. COMPLIANT. & TO COMPLY WITH NC BLDG. CODE VOL 1-C.

AutoCAD SHX Text- ALL HARDWARE SHALL MEET 2009 ANSI AND THE 2018 NC BUILDING CODE. THE CONTRACTOR IS TO SUBMIT SHOP DRAWINGS OF EACH SET FOR ARCHITECT APPROVAL.

AutoCAD SHX Text- ALL RELOCATED AND EXISTING DOORS TO BE STRIPPED AND PAINTED TO MATCH NEW DOORS. COORDINATE WITH ARCHITECT FOR PAINT COLORS. (IF APPLICABLE)

AutoCAD SHX Text- GC TO VERIFY THAT ALL EXISTING DOORS ARE INSTALLED AS INDICATED ON PLAN.

AutoCAD SHX Text- ALL CLOSERS TO BE CONCEALED CLOSERS, GC TO INCLUDE IN PRICE & SUBMIT WITH DOOR/HARDWARE SHOP DRAWINGS.CONCEALED CLOSERS, GC TO INCLUDE IN PRICE & SUBMIT WITH DOOR/HARDWARE SHOP DRAWINGS. GC TO INCLUDE IN PRICE & SUBMIT WITH DOOR/HARDWARE SHOP DRAWINGS.

AutoCAD SHX Text- GENERAL CONTRACTOR TO COORDINATE WITH ARCHITECT FOR ALL STOREFRONT GLASS COLORS.

AutoCAD SHX Text- PAINT COLOR FOR ALL METAL DOORS & FRAMES TO BE SELECTED BY TENANT.

AutoCAD SHX Text- ALL NECESSARY DOORS ARE TO RECEIVE PANIC HARDWARE AND CLOSERS AS REQUIRED BY CODE.

AutoCAD SHX Text- HARDWARE: COORD. WITH ARCHITECT FOR HARDWARE SPECIFICATION

AutoCAD SHX Text-

AutoCAD SHX TextTHE CONTRACTOR IS TO

AutoCAD SHX TextSUBMIT SHOP DRAWINGS OF EACH HARDWARE SET FOR ARCHITECT APPROVAL.

AutoCAD SHX Text- THE LOCKS ON EGRESS DOORS ARE TO COMPLY WITH IBC 1003.3.1.8. NO MANUALLY OPERATED FLUSH BOLTS OR

AutoCAD SHX TextSURFACE BOLTS WILL BE USED ON THE EGRESS DOORS (UNLESS OTHERWISE NOTED). THE GENERAL CONTRACTOR IS TO SUBMIT SHOP DRAWINGS

AutoCAD SHX TextFOR PANIC HARDWARE ON ALL EGRESS DOORS.

AutoCAD SHX Text- PROVIDE THRESHOLDS, DOOR STOPS & SILENCERS FOR ALL DOORS/FRAMES.

AutoCAD SHX Text- THE 2018 INTERNATIONAL FIRE CODE, SECTION 1011.3 REQUIRES A

AutoCAD SHX TextTACTILE SIGN STATING EXIT AND COMPLYING WITH ICC A117.1 (RAISED LETTERING AND BRAILLE) TO BE PROVIDED

AutoCAD SHX TextADJACENT TO EACH DOOR TO AN EGRESS STAIRWAY, AN EXIT PASSAGEWAY, THE EXIT DISCHARGE, AREA OF RESCUE,

AutoCAD SHX TextAND EXTERIOR AREA FOR ASSISTED RESCUE. SIGNS SHALL BE PLACED ON THE WALL, ON THE LATCH SIDE OF THE

AutoCAD SHX TextDOOR, 48 TO 60 INCHES OFF OF THE FLOOR.

AutoCAD SHX Text- GC TO RE-KEY

AutoCAD SHX Text%%UALL

AutoCAD SHX TextLOCKS (FOR ENTIRE PROJECT) PRIOR TO TURNOVER

AutoCAD SHX Text- WOOD DOORS SHALL BE SOLID WOOD CORE, ROTARY NATURAL BIRCH, PAINTED

AutoCAD SHX Text1. LOCATION TO BE COORDINATED WITH ARCHITECTURAL PLANS. 2. WIDTH AND HEIGHT TO BE COORDINATED WITH WINDOW SCHEDULE 3. MANUFACTURER TO BE KAWNEER OR APPROVED EQUAL. APPROVED EQUAL. EQUAL. 4. FIELD VERIFY ALL DIMENSIONS AND OPENINGS PRIOR TO ALL DIMENSIONS AND OPENINGS PRIOR TO DIMENSIONS AND OPENINGS PRIOR TO FABRICATION. 5. 1" INSULATED GLASS TO BE USED AT ALL WINDOW TYPES WITH LOW-E COATING. 6. ALL FRAMES TO BE BLACK ALUMINUM. 7. ALL STOREFRONT GLASS SHALL BE TEMPERED.

AutoCAD SHX TextWINDOW NOTES

AutoCAD SHX TextGENERAL FINISH NOTES

AutoCAD SHX Text1. ALL PAINT SHALL BE SHERWIN WILLIAMS PAINTS UNLESS NOTED OTHERWISE. ALL COLORS TO BE

AutoCAD SHX TextSELECTED BY TENANT.

AutoCAD SHX Text2. ALL TRANSITIONS AT DOORS TO RECEIVE THRESHOLDS (TO BE ADA COMPLIANT).

AutoCAD SHX Text3. FLOORING CONTRACTOR TO SUBMIT PROPOSED CARPET SEAM LOCATIONS FOR APPROVAL PRIOR

AutoCAD SHX TextTO INSTALLATION (IF APPLICABLE).

AutoCAD SHX Text4. INSTALL ALL MATERIALS IN STRICT ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.

AutoCAD SHX Text5. G.C. TO COORDINATE ALL FINISH FLOOR DIMENSIONS W/ FLOOR PLAN & DETAILS. CONTACT THE

AutoCAD SHX TextARCHITECT IMMEDIATELY IF ANY DISCREPANCIES OCCUR.

AutoCAD SHX Text6. GWB RECOMMENDED LEVEL OF FINISH TO BE LEVEL 4.

AutoCAD SHX Text7. ALL INTERIOR FLOOR FINISHES TO COMPLY W/ NCSBC 2018 SECTION 804.

AutoCAD SHX Text8. ALL WALL & CEILING FINISH MATERIALS TO COMPLY WITH 803 AND TABLE 803.11 OF THE 2018 NCSBC.

AutoCAD SHX Text9. ALL INTERIOR WALL & CEILING FINISHES FOR EXIT ENCLOSURES AND EXIT PASSAGEWAYS TO BE

AutoCAD SHX TextCLASS A, CORRIDORS TO BE CLASS B & ROOM AND ENCLOSED SPACES TO BE CLASS C.

AutoCAD SHX Text10. FLOORING CONTRACTORS MUST SUBMIT FLOORING SAMPLE TO ARCHITECT BEFORE ORDER &

AutoCAD SHX TextPURCHASE OF FLOORING PRODUCT.

AutoCAD SHX Text11. PROVIDE SCHULTER STAINLESS STEEL

AutoCAD SHX Text TRANSITION STRIP AT ALL CARPET TO TILE, TILE TO CONCRETE

AutoCAD SHX TextTRANSITION. TRANSITIONS BETWEEN DISSIMILAR FLOOR MATERIALS SHALL OCCUR UNDER DOOR

AutoCAD SHX TextWHEN DOOR IS IN CLOSED POSITION. IF NO DOOR, LOCATE AS NOTED ON PLAN.

AutoCAD SHX Text12. REFERENCE REFLECTED CEILING PLANS FOR CEILING TYPES AND FINISHES.

AutoCAD SHX Text13. ALL FLOORING PRODUCTS TO BE INSTALLED PER MANUFACTURER'S RECOMMENDATIONS TO INSURE

AutoCAD SHX TextALL APPLICABLE WARRANTIES AND PROPER FINISH OUT.

AutoCAD SHX Text14. COORDINATION OF TILE AND CARPET SURFACES TO BE OF FLAT, CONSISTENT TRANSITION.

AutoCAD SHX TextPREPARATIONS TO BE MADE PRIOR TO INSTALLATION TO ALLOW FOR MATERIAL THICKNESS.

AutoCAD SHX TextTYPE


AutoCAD SHX TextHEAD

AutoCAD SHX TextJAMB

AutoCAD SHX TextHM

AutoCAD SHX TextH-1

AutoCAD SHX TextJ-1

AutoCAD SHX Text1. ALL DOORS TO HAVE DOOR STOPS & SILENCERS. 2. ALL LOCKSETS TO HAVE REMOVAL CORES FOR MASTER KEYING SYSTEM. 3. ALL DOOR KNOBS TO BE ORB SCHLAGE JUPTIER DOOR LEVER HANDLES 4. HINGES, STRIKES AND STOPS TO BE SCHLAGE ORB

AutoCAD SHX TextHARDWARE LEGEND & NOTES

AutoCAD SHX TextALUM/GLASS

AutoCAD SHX TextSTOREFRONT

AutoCAD SHX TextD-2



AutoCAD SHX Text-

AutoCAD SHX Text-

AutoCAD SHX TextHARDWARE SETS:

AutoCAD SHX Text1

AutoCAD SHX Text2

AutoCAD SHX TextALL DOOR HARDWARE SHALL BE SELECTED BY OWNER PASSAGE LEVER WITH ADA VACANCY INDICATOR DEADBOLT. SCHLAGE B571 OR EQUAL

AutoCAD SHX TextKEYED LOCK

AutoCAD SHX TextLOCK ON OUTSIDE- LOCKING DEVICE SHALL BE READILY DISTINGUISHABLE AS LOCKED AND PROVIDED WITH A THUMB BOLT WHEN LOCKED FROM EGRESS SIDE. A READILY VISIBLE SIGN POSTED ON EGRESS SIDE STATING: "THIS DOOR TO REMAIN UNLOCKED WHEN THIS SPACE IS OCCUPIED" IN ONE INCH HIGH LETTERS ON CONTRASTING BACKGROUND. THE UNLATCHING OF ANY EXIT DOOR SHALL NOT REQUIRE MORE THAN ONE ACTION.

AutoCAD SHX Text3

AutoCAD SHX TextPRIVACY

AutoCAD SHX Text1

AutoCAD SHX TextOPEN- PAINT



AutoCAD SHX TextTENANT B 102







AutoCAD SHX TextENTRY 103







AutoCAD SHX TextTENANT A 201


AutoCAD SHX TextEXIST. WOOD





AutoCAD SHX TextTENANT B 202


AutoCAD SHX TextEXIST. WOOD





AutoCAD SHX TextTILE

AutoCAD SHX TextRR 203





















AutoCAD SHX Text3



AutoCAD SHX TextA

AutoCAD SHX TextD-1




AutoCAD SHX TextHM

AutoCAD SHX TextH-1

AutoCAD SHX TextJ-1


AutoCAD SHX Text1

AutoCAD SHX Text4



AutoCAD SHX TextA

AutoCAD SHX TextD-1




AutoCAD SHX TextHM

AutoCAD SHX TextH-1

AutoCAD SHX TextJ-1


AutoCAD SHX Text1

AutoCAD SHX Text5






AutoCAD SHX TextD-3



AutoCAD SHX Text-

AutoCAD SHX Text-


AutoCAD SHX Text3

AutoCAD SHX Text6



AutoCAD SHX TextA

AutoCAD SHX TextD-1




AutoCAD SHX TextHM

AutoCAD SHX TextH-1

AutoCAD SHX TextJ-1


AutoCAD SHX Text7



AutoCAD SHX TextA

AutoCAD SHX TextD-1




AutoCAD SHX TextHM

AutoCAD SHX TextH-1

AutoCAD SHX TextJ-1


AutoCAD SHX Text8






AutoCAD SHX TextD-4



AutoCAD SHX Text-

AutoCAD SHX Text-


AutoCAD SHX Text3

AutoCAD SHX Text3

AutoCAD SHX Text3

AutoCAD SHX Text5' CLR TURN AROUND

AutoCAD SHX TextCLEARANCE PER 603.2.2 EXCEPT. 2 ICC A117.1-2009

AutoCAD SHX TextT-6

AutoCAD SHX TextT-8

AutoCAD SHX TextT-9

AutoCAD SHX TextT-7

AutoCAD SHX TextT-2

AutoCAD SHX TextT-3

AutoCAD SHX TextT-4

AutoCAD SHX TextT-1

AutoCAD SHX Text59"X60" CLR.

AutoCAD SHX Text30"X48" CLR.

AutoCAD SHX Text36" HANDICAP GRAB BAR

AutoCAD SHX TextBOBRICK B06806 x 36

AutoCAD SHX TextRESTROOM ACCESSORY SCHEDULE

AutoCAD SHX TextDESCRIPTION

AutoCAD SHX TextCODE

AutoCAD SHX TextMANUFACTURER

AutoCAD SHX TextREMARKS

AutoCAD SHX TextDECORATIVE MIRROR

AutoCAD SHX TextPROTECTIVE WATER PIPE COVER

AutoCAD SHX TextTRUEBRO - LAV-GUARD # 402

AutoCAD SHX TextINSTALL UNDER SINK

AutoCAD SHX TextSEE PLUMBING FOR EXACT SPEC.

AutoCAD SHX TextLAVATORY

AutoCAD SHX TextOWNER SELECTED

AutoCAD SHX TextBOBRICK B-6806 X 18


AutoCAD SHX TextPROVIDE BLOCKING IN WALL TO WITHSTAND 250 LBS.

AutoCAD SHX TextAMERICAN STANDARD MODEL LUCERNE MODEL 0356.421.020


AutoCAD SHX TextAMERICAN STANDARD MODEL MADERA FLOWISE 3451.001.020


AutoCAD SHX TextSEE PLUMBING FOR EXACT SPEC.

AutoCAD SHX TextT-1

AutoCAD SHX TextT-2

AutoCAD SHX TextT-3

AutoCAD SHX TextT-4

AutoCAD SHX TextT-5

AutoCAD SHX TextT-6

AutoCAD SHX TextT-7

AutoCAD SHX TextT-8

AutoCAD SHX TextT-9

AutoCAD SHX TextTOILET PAPER DISPENSER

AutoCAD SHX TextBOBRICK B-5288

AutoCAD SHX TextSURFACE MOUNTED -STANDARD DOUBLE ROLL


AutoCAD SHX TextBOBRICK B-6806 x 48


AutoCAD SHX TextNOT USED

AutoCAD SHX TextOWNER SELECTED


















1A4

RCP1/4 =1'-0"

1

FIRST FLOOR

A4

P HA L

857

BELM

ON

T AV

E

RCP

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextR

AutoCAD SHX TextR

AutoCAD SHX TextR

AutoCAD SHX TextR

AutoCAD SHX TextR

AutoCAD SHX TextOPEN CLG


AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextR

AutoCAD SHX TextFLASH & COUNTERFLASH NEW AWNING TO EXISTING CMU WALL AS REQ. FOR WATERTIGHT CONSTRUCTION

AutoCAD SHX TextFLASH & COUNTERFLASH NEW AWNING TO EXISTING CMU WALL AS REQ. FOR WATERTIGHT CONSTRUCTION

AutoCAD SHX TextDIRECTIONAL EXIT SIGNAGE- SEE ELECTRICAL

AutoCAD SHX TextLEGEND

AutoCAD SHX TextACCEPTABLE

AutoCAD SHX TextNOT ACCEPTABLE



AutoCAD SHX Text1. CONTRACTOR TO COORDINATE WITH ALL M.E.P. DRAWINGS. NOTIFY ARCHITECT IMMEDIATELY SHOULD ANY DISCREPENCIES OCCUR. 2. CONTRACTOR SHALL COORDINATE ALL HVAC EQUIPMENT AND DUCTWORK WITH LIGHTING LAYOUT TO ENSURE PROPER INSTALLATION OF BOTH SYSTEMS. 3. COORDINATE ALL SOFFITS HEIGHTS WITH MILLWORK ELEVATIONS AND MANUFACTURERS TO INSURE PROPER HEIGHTS AND CLEARANCES. NOTIFY ARCHITECT IMMEDIATELY OF ANY DISCREPANCIES BETWEEN DRAWINGS. 4. ALL CEILING TILE SHALL BE ARMSTRONG CIRRUS BEVELED TEGULAR TILE WITH 9/16 SUPRAFINE EXPOSED TEE GRID OR AS INDICATED IN THE SPECIFICATIONS. 5. GENERAL CONTRACTOR TO MAINTAIN EXISTING CEILING TENANT SEPARATIONS. IF NOT PRESENT NOTIFY THE ARCHITECT IMMEDIATELY AND PROVIDE INSTALLATION AS REQUIRED. 6. CENTER CEILING GRID INSIDE ROOM UNLESS NOTED OTHERWISE. 7. COORDINATE WITH FOOD EQUIPMENT PLANS - NOTIFY THE ARCHITECT IMMEDIATELY SHOULD ANY DISCREPENCIES OCCUR. 8. COORDINATE WITH ELEVATIONS FOR ALL LIGHTING MOUNTING HEIGHTS. 9. 6" MINIMUM TILE AT ALL AREAS WHERE CEILING GRID TERMINATES, IF LESS THAN 6", GENERAL CONTRACTOR IS TO CUT A 2X4 TILE TO THE REQUIRED LENGTH

AutoCAD SHX TextREFLECTED CEILING PLAN NOTES

AutoCAD SHX Text1X4 LED LAY-IN FIXTURE - TO BE SELECTED BY OWNER

AutoCAD SHX TextR

AutoCAD SHX Text6" RECESSED LED CAN

AutoCAD SHX TextA

AutoCAD SHX TextARMSTRONG CIRRUS BEVELED TEGULAR TILE WITH 9/16 SUPRAFINE EXPOSED TEE GRID

AutoCAD SHX TextA


AutoCAD SHX TextEXTERIOR LOCATIONS TO BE RATED FOR EXTERIOR USE


















1A5

RCP1/4 =1'-0"

1

GROUND FLOOR

A5

P HA L

857

BELM

ON

T AV

E

RCP

AutoCAD SHX TextA

AutoCAD SHX TextR

AutoCAD SHX TextR




AutoCAD SHX TextR

AutoCAD SHX TextR

AutoCAD SHX TextR

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextA

AutoCAD SHX TextCOUNTERFLASH NEW AWNING TO EXISTING CMU WALL AS REQ. FOR WATERTIGHT CONSTRUCTION

AutoCAD SHX TextKEEP ALL DUCT WORK HIGH AS POSSIBLE TYP.

AutoCAD SHX TextKEEP ALL DUCT WORK HIGH AS POSSIBLE TYP.

AutoCAD SHX TextDIRECTIONAL EXIT SIGNAGE- SEE ELECTRICAL

AutoCAD SHX TextLEGEND


AutoCAD SHX TextNOT ACCEPTABLE



AutoCAD SHX Text1. CONTRACTOR TO COORDINATE WITH ALL M.E.P. DRAWINGS. NOTIFY ARCHITECT IMMEDIATELY SHOULD ANY DISCREPENCIES OCCUR. 2. CONTRACTOR SHALL COORDINATE ALL HVAC EQUIPMENT AND DUCTWORK WITH LIGHTING LAYOUT TO ENSURE PROPER INSTALLATION OF BOTH SYSTEMS. 3. COORDINATE ALL SOFFITS HEIGHTS WITH MILLWORK ELEVATIONS AND MANUFACTURERS TO INSURE PROPER HEIGHTS AND CLEARANCES. NOTIFY ARCHITECT IMMEDIATELY OF ANY DISCREPANCIES BETWEEN DRAWINGS. 4. ALL CEILING TILE SHALL BE ARMSTRONG CIRRUS BEVELED TEGULAR TILE WITH 9/16 SUPRAFINE EXPOSED TEE GRID OR AS INDICATED IN THE SPECIFICATIONS. 5. GENERAL CONTRACTOR TO MAINTAIN EXISTING CEILING TENANT SEPARATIONS. IF NOT PRESENT NOTIFY THE ARCHITECT IMMEDIATELY AND PROVIDE INSTALLATION AS REQUIRED. 6. CENTER CEILING GRID INSIDE ROOM UNLESS NOTED OTHERWISE. 7. COORDINATE WITH FOOD EQUIPMENT PLANS - NOTIFY THE ARCHITECT IMMEDIATELY SHOULD ANY DISCREPENCIES OCCUR. 8. COORDINATE WITH ELEVATIONS FOR ALL LIGHTING MOUNTING HEIGHTS. 9. 6" MINIMUM TILE AT ALL AREAS WHERE CEILING GRID TERMINATES, IF LESS THAN 6", GENERAL CONTRACTOR IS TO CUT A 2X4 TILE TO THE REQUIRED LENGTH

AutoCAD SHX TextREFLECTED CEILING PLAN NOTES


AutoCAD SHX TextR

AutoCAD SHX Text6" RECESSED LED CAN

AutoCAD SHX TextA

AutoCAD SHX TextARMSTRONG CIRRUS BEVELED TEGULAR TILE WITH 9/16 SUPRAFINE EXPOSED TEE GRID

AutoCAD SHX TextA


AutoCAD SHX TextEXTERIOR LOCATIONS TO BE RATED FOR EXTERIOR USE


















8" M

IN

.

14

" N

OM

IN

AL

1A6

ROOF PLAN1/4 =1'-0"

1

ROOF PLAN

A6

P HA L

857

BELM

ON

T AV

E

1A6

ROOF CURBS1/2 =1'-0"

2

AutoCAD SHX TextEXISTING DOUBLE SLANT CLAY WALL PARAPET CAPS TO REMAIN

AutoCAD SHX TextEXISTING DOUBLE SLANT CLAY WALL PARAPET CAPS TO REMAIN

AutoCAD SHX TextPRE=FAB METAL AWNINGS WITH INTEGRAL DRAINS

AutoCAD SHX TextAPPROX. LOCATION OF RTUS- COORD. WITH STRUCTURAL AND MECHANICAL. ALL UNITS SHALL HAVE ROOF WALK PADS SURROUNDING EACH INSTALLATION WITH NO LESS THAN 3'-0" CLEARANCE AT ALL SIDES

AutoCAD SHX TextPRE=FAB METAL AWNINGS WITH INTEGRAL DRAINS

AutoCAD SHX TextSLOPE ROOF EXISTING

AutoCAD SHX TextSLOPE 6" GUTTER 1/4" PER FOOT TOWARDS 4"X6" DOWNSPOUT

AutoCAD SHX TextSLOPE 6" GUTTER 1/4" PER FOOT TOWARDS 4"X6" DOWNSPOUT






AutoCAD SHX TextNOTE: ROOF ACCESS PROVIDED BY LEAN TO LADDER

AutoCAD SHX TextREMOVE EXISTING ROOF COVERING AND REPLACE WITH MECHANICALLY FASTED MEMBRANE OVER R-25 RIGID INSULATION. REPLACE EXISTING ROOF SHEATHING AS REQ TO MATCH EXISTING THICKNESS- CONTRACTOR TO VERIFY ROOF SHEATHING CONDITION PRIOR TO CONSTRUCTION

AutoCAD SHX TextGUTTER & DOWNSPOUT CALCULATIONS

AutoCAD SHX TextDATA: ROOF AREA = 3,170 SF 12 AREA OF PARAPET WALLS = 228 SF TOTAL ROOF AREA = 3,398 SF PRIMARY RAINFALL = 3.7"/HR DOWNSPOUT SIZE = 4" x 6" GUTTER SIZE = 6" @ 1/4" SLOPE = 5,350 SF @ 4"/HR

AutoCAD SHX TextCALCULATIONS - PRIMARY DOWNSPOUTS CAPACITY OF PRIMARY DOWNSPOUT = 123.3 GAL/MIN = 7,398 GAL/HR EACH CAPACITY OF COMBINED PRIMARY DOWNSPOUTS = 2 X 7,398 GAL/HR = 14,796 GAL/HR PRIMARY RAINFALL TOTALS = 3.7"/HR X 3,398 SF = 1,048 CU FT/HR = 7,850 GAL/HR TOTAL DOWNFALL FOR DOWNSPOUTS= 7,850 GAL/HR 7,850 GAL/HR

AutoCAD SHX TextCONCLUSIONS: PRIMARY DOWNSPOUTS DESIGN = 14,796 GAL/HR DEMAND = 7,850 GAL/HR

AutoCAD SHX Text1. NEW ROOF SYSTEM SHALL BE MECHANICALLY FASTENED MEMBRANE OVER R-25 RIGID INSULATION (TYP). INSULATION TO MEET FM 4450 OR UL 1256 TESTING. 2. ROOF TO SLOPE TO THE REAR OF THE BUILDING (PARKING LOT SIDE) TO DOWNSPOUTS & SCUPPERS AS SHOWN ON THE DRAWINGS. 3. ALL ROOF CANT AND CRICKET CONSTRUCTION TO SLOPE A MINIMUM OF 1/4" PER FOOT IN DIRECTION SHOWN, IF NEEDED. 4. ALL PARAPET FLASHING AND ALUMINUM CAPS TO SLOPE TOWARD ROOF. PARAPET FLASHING COLOR TO BE SELECTED BY OWNER.

AutoCAD SHX TextGENERAL ROOF PLAN NOTES

AutoCAD SHX Text16 GA MIN. FRAME

AutoCAD SHX Text2" FIRE RATED WOOD NAILER

AutoCAD SHX TextINSULATION SUPPLIED BY CURB MANUFACTURER

AutoCAD SHX TextSEE STRUCTURAL DRAWINGS FOR STEEL ANGLES AND FRAMING AT UNIT OPENINGS

AutoCAD SHX TextSEAL STRIP

AutoCAD SHX TextCOUNTERFLASHING FASTENED APPROX. 18" O.C. SUPPLIED AND INSTALLED BY SHEET METAL CONTRACTOR

AutoCAD SHX TextBASE FLASHING

AutoCAD SHX TextFASTENERS APPROX. 8" O.C.

AutoCAD SHX Text2" NOMINAL

AutoCAD SHX TextFIBER CANT STRIP SET IN BITUMEN

AutoCAD SHX TextFIRE RATED WOOD BLOCKING FASTENED TO DECK

AutoCAD SHX Text1.) ALL FLASHINGS, FASTENERS & CANTS TO MEET ROOF MANUFACTURERS WARRANTY REQUIREMENTS. 2.) NOTE DETAIL ARE TO BE ADAPTED PER ROOF MANUFACTURERS RECOMMENDATIONS FOR SINGLE PLY ROOFING MEMBRANE WITH MECHANICALLY FASTENED INSULATION

AutoCAD SHX TextROOF CURB NOTES


















1A7

SEIGLE RD ELEVATION1/4 =1'-0"

1

ELEVATIONS

A7

P HA L

857

BELM

ON

T AV

E

A7PARKING LOT ELEVATION1/4 =1'-0"

2A7

BELMONT AVE ELEVATION1/4 =1'-0"

3

1A7

REAR ELEVATION1/4 =1'-0"

4

AutoCAD SHX TextFACADE: 1024 SF (10% = 102.4 SF) MODIFICATIONS:102 SF (9.96%) 102 SF (9.96%) DOES NOT INCLUDE PLYWOOD COVERED OPENING

AutoCAD SHX TextFACADE: 178 SF (10% = 17.8 SF) MODIFICATIONS:0 SF (0%)0 SF (0%)

AutoCAD SHX Text1ST FLOOR



AutoCAD SHX TextNEW STOREFRONT WINDOWS IN EXISTING OPENING

AutoCAD SHX TextNEW STOREFRONT WINDOWS IN NEW OPENINGS- COORD. WITH STRUCTURAL

AutoCAD SHX TextFILL EXISTING OPENINGS

AutoCAD SHX TextNEW METAL AWNING


AutoCAD SHX TextNEW WOOD STAIR & RAMP

AutoCAD SHX TextALIGN SILL HEIGHTS

AutoCAD SHX TextEXISTING OPENING WITH PLYWOOD COVER



AutoCAD SHX TextGROUND FLOOR

AutoCAD SHX TextOPTIONAL LOWER GROUND FLOOR

AutoCAD SHX TextFACADE: 545 SF (10% = 54.5 SF) MODIFICATIONS:53.7 SF (9.85%)S:53.7 SF (9.85%)




AutoCAD SHX TextFILL IN EXISTING WINDOW

AutoCAD SHX TextNEW STOREFONT DOOR & WINDOWS. REMOVE EXISTING DOOR & STAIRS

AutoCAD SHX TextNEW WOOD STAIR & RAMP







AutoCAD SHX TextWOOD RAMP/STAIR & GUARD/HANDRAIL COORD. WITH STRUCTURAL


AutoCAD SHX TextFACADE: 425 SF (10% = 42.5 SF) MODIFICATIONS:41.2 SF (9.96%) 41.2 SF (9.96%) DOES NOT INCLUDE PLYWOOD COVERED OPENING




AutoCAD SHX TextNEW STOREFRONT WINDOWS IN EXISTING OPENING

AutoCAD SHX TextNEW STOREFONT DOORS & WINDOWS IN EXISTING OPENING


AutoCAD SHX TextEXISTING OPENING WITH PLYWOOD COVER






AutoCAD SHX TextFACADE: 1619 SF (10% = 161.9 SF) MODIFICATIONS: 30 SF (1.8%)

AutoCAD SHX TextOVERHEAD POWER

AutoCAD SHX TextELECTRICAL METER

AutoCAD SHX TextGAS METER

AutoCAD SHX TextELECTRICAL FEEDING INTERIOR PANEL

AutoCAD SHX TextFILL IN WINDOW HVAC UNIT




AutoCAD SHX TextREPLACE EXISTING WINDOWS IN EXISTING OPENINGS

AutoCAD SHX TextNEW STOREFRONT IN EXISTING OPENING- VERIFY DIMENSIONS PRIOR TO FABRICATION

AutoCAD SHX TextNEW STOREFRONT WINDOWS IN NEW OPENING

AutoCAD SHX TextMODIFY EXISTING ASPHALT TO ALLOW FOR LEVEL ENTRY

AutoCAD SHX TextSLOPE ASPHALT AWAY FROM BUILDING





AutoCAD SHX TextRE-GRADE EXISTING TO PROVIDE LEVEL ENTRY. SLOPE AWAY FROM BUILDING MAX. 2%



















Sheets and ViewsCS_Cover Sheet G1_GENERAL NOTESG2_APPENDIX B_LIFE SAFETY PLANA1_1ST FLOOR PLANA2_GROUND FLOOR PLANA3_SCHEDULESA4_REFLECTED CEILING PLANA5_GROUND REFLECTED CEILING PLANA6_ROOF PLANA7_ELEVATIONS

s h e e t t i t l elandmarkscommission.org/wp-content/uploads/2020/06/857... · 2020. 6. 11. ·...

Documents