s-1438
TRANSCRIPT
-
7/27/2019 s-1438
1/2
2007|Cummins Power Generation Inc.|All rights reserved|Specifications subject to change without notice|Cummins Power Generationand Cummins are registered trademarks of Cummins Inc. PowerCommand and Our energy working for you. are trademarks of CumminsPower Generation. Other company, product, or service names may be trademarks or service marks of others.
S-1438c (9/07)
PowerCommand
Software for Windows
(PCW 5.0)
Description FeaturesPowerCommand Software for Windows V 5.0
provides advanced monitoring and control forCummins Power Generation and other customer
equipment via the PowerCommand Network.
Monitored equipment can include generator sets,
transfer switches, circuit breakers, pumps, fans,
motors or other devices connected to the
PowerCommand Network. The software allows a
personal computer (PC) to monitor and control
virtually any number of sites containing multiple
pieces of power generation equipment.
PowerCommand Software for Windows will also allow
a PC to send alarm notifications via email.
Sites can be monitored locally through directconnection of the customers PC to the generator or
remotely over dial-up connection. An unlimited
number of individual sites can be monitored quickly
and easily using the Graphical User Interface (GUI).
The software GUI displays an electronic
representation of the generator or ATS operator
panel. Through an innovative design, the customer
can access generator or transfer switch data through
an intuitive electronic representation of the control
face of the device monitored. System parameters are
displayed on the customers PC as a virtual
representation of the actual device. By clicking on
the monitoring PC screen, equipment information isdisplayed using the same button format as found on
the equipment operator panel.
Scalable software interface to Cummins PowerGeneration products to allow a wide range ofcapabilities, ranging from simple direct-connected data
gathering to total system monitoring.
Graphical User Interface for easy componentidentification.
Simulated operator panel user interface forPowerCommand genset and transfer switch controls.
Tabular view of data for Cummins networkcomponents.
Supports concurrent monitoring of one local or oneremote (network) connection; or can directly monitor
controls via a direct serial interface.
Compatible with PowerCommand Network Moduleswith Echelons
FTT-10 transceiver set. Strip chart and monitor functions allow real-time data
gathering and display of user defined points.
Compare utility allows comparison of site data. System administration/security features allow user
access privileges to be restricted.
Allows multiple monitoring windows to be open.Alarm pop-up window provides notification of alarm
conditions.
Alarm logging for historical record keeping. Standard reports and data exporting capabilities to
allow user development of custom reports.
WinBEEP 32 interface for alarm notification via apager system.
Sends email on alarm conditions.
-
7/27/2019 s-1438
2/2
Our energy working for you.
www.cumminspower.com
2007|Cummins Power Generation Inc.|All rights reserved|Specifications subject to change without notice|Cummins Power Generationand Cummins are registered trademarks of Cummins Inc. PowerCommand and Our energy working for you. are trademarks of CumminsPower Generation. Other company, product, or service names may be trademarks or service marks of others.
S-1438c (9/07)
PowerCommand for Windows V 5.0 allows user to select either tabular form data display or graphical display of data in
a format similar to that used on the actual equipment monitored.Required equipment specifications
Personal computer (minimum requirements):
- IBM compatible PC with Windows 98, ME, 2000, XP or
Windows NT operating systems
- Pentium III / 4, 350 MHz or faster- 128 Mb RAM
- 8 GB hard-drive
- VGA color monitor
- 8 x CD-ROM (recommended)
- One free serial communications port (Com 1 to Com 4)
Network protocols:
- Echelon LonWorks, LNS
- PC or modem connection via Network Gateway Module
(RS232)Ordering information
Part number Description
0998-0016-01 PowerCommand Software for Windows V 5.0, direct connect. For direct RS232 connection of aPC with PCW 2.5 to a single PowerCommand genset or transfer switch.
0998-0016-02 PowerCommand Software for Windows V 5.0, with networks support. For local or remotemonitoring of one or more PowerCommand products operating on a network. Requires use of a
Network Gateway Module to interface PC to LonWorks network components.
www.spartacom.com WinBEEP 32 (V 4.0) paging software.
See your distributor for more information.
Cummins Power Generation
Americas
1400 73rd Avenue N.E.
Minneapolis, MN 55432 USA
Phone: 763 574 5000
Fax: 763 574 5298
Europe, CIS, Middle East and Africa
Manston Park Columbus Ave.
Manston Ramsgate
Kent CT 12 5BF United Kingdom
Phone 44 1843 255000
Fax 44 1843 255902
Asia Pacific
10 Toh Guan Road #07-01
TT International Tradepark
Singapore 608838
Phone 65 6417 2388
Fax 65 6417 2399