rurruu memmee ntnntt .cc oom contentsprosperitycorpus.com/documents/catalogue-construction... ·...
TRANSCRIPT
www.shidaiyiqi.com.cn
BEIJING TIME HIGH TECHNOLOGY CO., LTD. ISO 9001
A1 REBAR LOCATOR TC100/110
A2 CRACK DEPTH GAUGE TC200
A3 CRACK DEPTH GAUGE TC210
A4 CONCRETE THICKNESS GAUGE TC300
A5 CRACK WIDTH GAUGE TC400
A6 CRACK WIDTH GAUGE TC410
A7 CONCRETE TEST HAMMER TC500
A8 DIGITAL CONCRETE TEST HAMMER TC510
A9 REBAR CORROSION DETECTOR TC600
B1 TOTAL STATION TTS105
B2 ELECTRONIC LASER THEODOLITE TEL100
B3 ELECTRONIC THEODOLITE TET100
B4 AUTO LEVEL AL SERIES
B5 LASER TUNNEL DETECTOR TTD100
B6 LASER TUNNEL DETECTOR TTD200
B7 BRIDGE DEFLECTION DETECTOR TBD100
B8 LASER LEVEL SERIES
C1 INDUSTRIAL VIDEO BORESCOPE TBS-N SERIES
C2 INDUSTRIAL VIDEO ENDOSCOPE TBS-V SERIES
C3 INDUSTRIAL FIBERSCOPE TBS-F/FI SERIES
D1 AC YOKE-MAGNETIC PARTICLE FLAW DETECTOR TCJE
D2 LOW-FREQUENCY MAGNETIC FLAW DETECTOR TCLF
E1 HOLIDAY DETECTOR DJ SERIES
E2 UNDERGROUND PIPE AND CABLE LOCATOR TUP SERIES
F1 PORTABLE COLOR DIFFERENCE METER TCD100
F2 PRECISE COLOR READER TCR200
CONCRETE TESTING GAUGE
SURVEY AND CONSTRUCTION INSTRUMENT
INDUSTRIAL ENDOSCOPE
MAGNETIC FLAW DETECTOR
HOLIDAY DETECTOR
COLORIMETER
CONTENTS
A
B
C
D
E
F
w w w . t it m e i n s t r uu m e n t . c oo mi n ss ts t rt r ur u mr u m eu m e nn te nn t cc o mt cc o m
E-2010B
TC100
TC110
ISO 9001
TC100
TC110
ISO 9001 REBAR LOCATOR TC100/110
Brief Introduction
Standard Delivery (TC100)
Features
Technical Specifi cation
Other special testing conditions
● TC100/110 is used to detect the thickness of concrete covering layer and rebar diameter. Besides, it can detect the location of magnetic substance and electric conductor in non-magnetic and non-conductive medium, e.g. cable inside wall body and water & heating pipe etc. it is a kind of intelligent nondestructive test equipment possessing the functions of automatic detection, data memory and output.
● Main unit 1● Transducer 1● Software 1● Signal cable 1● Shoulder strap 1● AA battery (LR6) 6● Key 2● Instruction manual 1● TIME certificate 1● Warranty card 1 Standard Delivery (TC110) ● Main unit 1● Transducer 1● Software 1● Signal cable 1● Shoulder strap 1● Connecting cable 1● Scanning trolley 1● AA battery (LR6) 6● Key 2● Instruction manual 1● TIME certificate 1● Warranty card 1
● Acceptance inspection of cover after formwork is removed● Locate rebars to avoid them when drilling holes● Provide essential data (location, cover, diameter of rebars) for
strength calculations of reinforced concrete structures● Measuring concrete cover thickness● Quality assurance in mass production of fabricated concrete
elements● Measuring the thickness of concrete over steel reinforcement and
metal pipes● Signal strength bar display and sound alarm for high accuracy ● Real time graphic output both to screen and printer● Data processing software compatible with windows 95/98/2000/
Me/WT/XP● Auto calibration, correct the system error● Three scan modes for TC110:grid pattern, profile scan and large
area scan● For TC110:direct display gridding and profile image of rebar
● Avoid strong magnetic field interruption● Avoid high temperature● Has no corrosive gas in the atmospheric
Covering layer thickness measuring range
Range Ⅰ:6mm-90mm
Range Ⅱ:7mm-180mm
Rebar diameter measuring range Ø6mm- Ø50mm
Tolerance of covering layer thickness Range Ⅰ Range Ⅱ
±1mm 6mm-59mm 7mm-79mm
±2mm 60mm-69mm 80mm-119mm
±4mm 70mm-90mm 120mm-180mm
Display Large graphic display with backlight
Operating temperature -10℃-40℃
Relative humidity <90%
Dimension 210mm x 153mm x 90mm
Net weight 880g
A1
ISO 9001ISO 9001CRACK DEPTH GAUGE TC200
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TC200 is used to measure concrete crack depth by applying principle of acoustic diffraction. It also can be used to measure propagation velocity of ultrasonic wave in concrete. This instrument is a kind of intelligent nondestructive test equipment possessing the functions of automatic detection, data memory and output.
● Main unit 1● Transducer 1● Signal cable 1● Bracket 1● Tapeline 1● Oil pen 1● Electric torch 1● Shoulder strap 1● AA battery (LR6) 6● Key 2● Instruction manual 1● TIME certificate 1● Warranty card 1
● Entire English display, clear and easy to use● Direct digital read out of the crack depth● Use special bracket to ensure the accuracy of two testing
points● A data base is set up to store and manage completed test
data for analysis reporting● RS232 interface to PC
Testing range 500mm
Tolerance
≤5mm (when crack depth is less than 50mm)
≤10%W (W means the crack depth)(when the depth is more than 50mm)
Memory 25000 test data
Power AA batteries (LR6) x 6
Display Large graphic display
Operating temperature -10℃-40℃
Relative humidity <90%
Dimension 210mm x 153mm x 90mm
Net weight 880g
A2
ISO 9001ISO 9001
A3
CRACK DEPTH GAUGE TC210
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TC210 accomplishes the fast measurements of crack depth by means of analyzing the geometry relationships between the diffraction angle and the crack depth. It is designed specifically for the non-destructive testing of the crack depth of bridges, tunnels, constructions and such concrete structures. The crack depth can be obtained without measuring velocity.
● Main unit 1● transducer 2● Software 1● Cable for probe 2● USB connecting cable 2● RS232 connecting cable 1● Measuring tape 1● Shoulder strap 1● Vaseline 1● Charger 1● Calibration stone 1● Instruction manual 1● TIME certificate 1● Warranty card 1
● New design of automatic reading device for the space between two probes
● Battery life can be greatly extended by low-power design● Manage the measured data, print and generate report
function available by software● Easy to operate by the controller with english menu ● Work in wet environment available by waterproof and
moisture-proof design
Measuring range 10-500mm
Tolerance ≤±5%
Operating mode Automatic and manual
Interface RS232 and USB
Memory More than 10000 test data
Power10Ah Li battery
continuous working more than 30 hours
Operating temperature -20℃-50℃
Relative humidity <85%
Dimension 210mm×120mm×60mm
Net weight 2.3kg
ISO 9001ISO 9001
A4
CONCRETE THICKNESS GAUGE TC300
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TC300 is used for measuring the thickness of nonmetallic plate indirectly, especially for concrete slab. This gauge is to measure the concrete slab thickness mainly by using distribution characteristics of electromagnetic field and possesses function of thickness measurement, data analysis, data storage & output etc. it is a kind of intelligent thickness measuring instrument that is portable, convenient and accurate.
● Main unit 1● Transmitting transducer 1● Receiving transducer 1● Supporting bar 5● Interphone 2● Signal cable 1● Charger 1● Shoulder strap 1● AA battery (LR6) 6● AAA battery (LR03) 6● Key 2● Instruction manual for interphone 1● Instruction manual 1● TIME certificate 1● Warranty card 1
● Measuring the thickness of concrete, rock, glass and other nonmetallic plates
● Sound alarm, signal strength bar are used to improve measuring accuracy
● Direct digital read out of the thickness value avoid theinaccuracy of manual comparison
● Test data create and data logging● RS232 and USB interface to PC● Real time analysis of the tested data
Measuring range 50-350mm
Accuracy±1mm[When thickness = (50-260mm)]
±2mm[When thickness = (261-350mm)]
Memory 32000 test data and 4000 components
Power AA batteries (LR6) x 6
Display Large graphic display
Operating temperature -10℃-40℃
Relative humidity <90%
Dimension 210mm×153mm×90mm
Net weight 880g
ISO 9001ISO 9001
A5
CRACK WIDTH GAUGE TC400
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TC400 is used for real time automatic detection of surface crack width on different material structure and real time observation of cracking process. This instrument is a kind of intelligent test equipment possessing the functions of automatic detection, data memory and output.
● Main unit 1● Transducer 1● Signal cable 1● Shoulder strap 1● Tapeline 1● Key 2● Instruction manual 1● TIME certificate 1● Warranty card 1
● Direct digital display of crack width● Automatic interpretation of crack width to improve
accuracy● Designed with constant lighting source for convenient use● Real time graphic display● Data view or delete, create testing report● With USB interface
Measuring range 0.02-8.0mm
Accuracy of estimation 0.01mm
Measurement error for measuringline of standard width calibration
±0.01mm
Memory 1000 test data
Display Large graphic display
Power Li-ion rechargeable batteries
Operating temperature -10℃-40℃
Relative humidity <90%
Dimension 170mm×120mm×60mm
Net weight 2.0kg
ISO 9001ISO 9001
A6
CRACK WIDTH GAUGE TC410
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TC410 is widely used for non-destructive testing of the crack width of bridges, tunnels, constructions and such concrete structures. During the detection, the system takes the image of the crack automatically and displays real-time image and width data of cracks. The image data can be saved automatically.
● Main unit 1● PDA 1● Software 1● USB connecting cable 1● USB extension cable 1● Extension bar 1● Charger 1● Power adapter for PDA 1● Instruction manual 1● Warranty card 1● TIME certificate 1
● The pistol-style design and integrated design with data acquisition probe
● Automatic image recognition and intelligent width calculation technique
● Quick measurement without any adjustment● Large screen of PDA for the more accurate and clear
image● Image file can be saved in JPEG format● Powerful processing software can be able to save and
analyses image and data
The main probe Specialized CCD camera
Controller PDA
Display mode Automatic calculation, save and display
Measuring range 0.0-3.0mm
Accuracy 0.02mm
Magnification 60×
Image formats JPEG (Around 10K per image)
Memory Internal memory (SD card extension)
Interface USB 2.0
Power Lithium battery
Operating temperature -20℃~+60℃
Dimensions 180mm×100mm×50mm
Net weight 1.0kg
ISO 9001ISO 9001
A7
CONCRETE TEST HAMMER TC500
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TC500N/L is a portable instrument to test the compressive strength of concrete structures or rock in non-destructive testing field. The type N hammer is designed for measuring concrete thickness 100mm or more, or concrete with a maximum particle size no more than 32 mm. The type L hammer is used for measuring thin walled items with a thickness between 50 to 100 mm or for testing small components.
● Hammer 1● Carborundum stone 1● Flip tension spring 1● Buffer spring 1● Screwdriver 1● Instruction manual 1● TIME certificate 1● Warranty card 1
● Suitable for testing a wide variety of concrete, rock and bricks
● Light, flexible and simple operation● Friction adjusted by the pointer● Adopt stretching techniques to let the button work well● Supplied with carborundum stone to prepare test surface
Model TC500N TC500L
Measuring range 10 to 70N/mm2
Impact energy 2.207Nm 0.735Nm
Spring extension 75±0.3mm
Friction of pointer system 0.65±0.15N 0.5±0.1N
Length of pointer 20.0±0.2mm
Radius of spherical tip 25±1.0mm
Working length of the spring 61.5±0.3mm
Mean value of steel-anvil rating 80±2 74±2
Flip tension spring rigidity 785.0±40.0N/m
Operating temperature 0℃~+40℃
Storage temperature -10℃~+50℃
DimensionsHammer 280mm×Φ60mm
With case 320mm×170mm×86mm
WeightHammer 1.0Kg 0.8Kg
With case 2.5kg 2.2Kg
ISO 9001ISO 9001
A8
DIGITAL CONCRETE TEST HAMMER TC510
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TC510N/L is a portable instrument to test the compressive strength of concrete structures or rock in non-destructive testing field. The rebound value can be converted into a reading on the digital display, and the estimated mean value, standard deviation and concrete strength can be shown.
● Main unit 1
● Hammer 1
● Signal cable 1
● USB connecting cable 1
● RS232connecting cable 1
● Flip tension spring 1
● Buffer spring 1
● Screwdriver 1
● Radius gauge 1
● Carborundum stone 1
● AA battery (LR6) 6
● Shoulder strap 1
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
● Automatic record and display of rebound value
● The main unit can be equipped with three mechanical hammers
● Record and setting of carbonation depth, rebound angle and test parameters
● Evaluation of the test results on the estimated concrete compressive strength of the component
● Display of the result simultaneously on the hammer and the screen
● The error between the hammer pointer and the displayed value on screen is no more than ±2
● Mass storage
● Possibility to store, display and transfer data to PC with USB interface
Model TC510N TC510L
Measuring range 10 to 70N/mm2
Impact energy 2.207Nm 0.735Nm
Spring extension 75±0.3mm
Friction of pointer system 0.65±0.15N 0.5±0.1N
Length of pointer 20.0±0.2mm
Radius of spherical tip 25±1.0mm
Working length of the spring 61.5±0.3mm
Mean value of steel-anvil rating 80±2 74±2
Flip tension spring rigidity 785.0±40.0N/m
Power supply AA batteries (LR6)×6
Operating temperature 0℃~+40℃
Storage temperature -10℃~+50℃
Dimensions Hammer :280mm×Φ60mm
Net weight 1.9Kg 1.7Kg
ISO 9001ISO 9001
A9
REBAR CORROSION DETECTOR TC600
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TC600 rebar corrosion detector is designed for assessing the corrosion of the reinforced concrete structure and components by half-cell potential method, the electrode is passed over the surface of the concrete and the potential voltage difference is recorded, then the corrosion of rebar is assessed.
● Main unit 1
● Electrode 2
● Signal cable 2
● USB connecting cable 1
● RS232connecting cable 1
● Connecting bar 1
● Extension cable 1
● Clamp 1
● Hygrothermograph 1
● Measuring tape 1
● AA battery (LR6) 6
● Shoulder strap 1
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
● Non-destructive testing the corrosion in rebar● Detection of the corrosion condition of the rebar accurately
and conveniently by field potential measurement● Possibility to store, view, delete data and transfer all
readings to PC with USB interface and serial port● Faster and more accurate processing of data, presentation
of test area and reading as numbers or graphics ● Display of measurement values in 9 grey-scale graphics● Permanent copper/copper sulphate reference electrodes
to measure electrical potentials
Measuring method Potential measurement
Measuring range ±1000mv
Resolution 1mv
Memory Mass storage
Space between testing points 1~100cm adjustable
Interface RS232 and USB
Power supply AA batteries (LR6)×6
Operating temperature -10℃~+40℃
Relative humidity <90%RH
Dimensions
Main unit 210mm×153mm×90mm
Probe Φ30mm×120mm
Weight
Main unit 880g
Probe 100g
ISO 9001ISO 9001
B1
TOTAL STATION TTS105
Brief Introduction
Features
Application
● TTS105 is an electronic/optical instrument mainly applied in construction and civil engineering field. Angles, distances, coordinates and many advanced measurements are accomplished by using trigonometry and triangulation. Downloading and uploading data are available.
● Large and high resolution screen guarantees a clear display
● Measure up to 100m in the reflectorless mode ● Extended internal memory accepts up to 50000 points● Handy EDM head● Electronic auto compensator● Equipped with advanced measurement programs and
practical software ● Possibility of red laser centering ● Red laser directing ensures pinpoint accuracy in
reflectorless distance measurement● Easy and direct operation with the alphanumeric keyboard
and the function keys● Long battery life up to 30 hours for angle measurement
only● Rugged, durable, water and dust resistant design
ISO 9001ISO 9001 TOTAL STATION TTS105
B1
Standard Delivery
Technical Specifi cation
● Main unit 1● Software 1● RS232 data cable 1● Rechargeable battery 2● Battery charger 1● Car charger 1● Tool kit 1● Dryer 1● Lint-free cloth 1● Brush 1● Screwdriver 1● Rain protector 1● Shoulder strap 1● Instruction manual 1● TIME certificate 1● Warranty card 1
ANGLE MEASUREMENT(Hz, V)Accuracy 5"Method Grating diskMin. reading 1"Standard deviation 2"Compensation Vertical axisCompensating range ±3′Level parameter: Circular level 8'/2mm Plate level 30″/2mmTELESCOPEMagnification 30×Image ErectField of view 1°30′(2.6%)Min. focus 1.5mOptical aperture 45mmLength of sleeve 150mmResolution 3"Distance of circles 71mmDISTANCE MEASUREMENTMin. reading 1mmReflector: Measurement range (Good condition): Single prism 4000m Triple prism 7000m Measurement accuracy ±(3+2ppm·D)mm Measurement time: Fine measurement mode (Repeat) About 1.8sec. (first time 2.5sec) Tracking measurement mode About 0.4sec. (first time 1.5sec) Atmospheric correction: ppm input range -499ppm~+499ppm(step 1ppm) Prism constant correction -99mm~+99mm (step 1ppm)Reflectorless: Measurement range (Kodak white) 100m Measurement accuracy ±5mm Measurement time: Fine measurement mode (Repeat) About 1.8sec. (first time 3sec) Tracking measurement mode About 0.5sec. (first time 2sec)DISPLAYScreen type 4-line dot matrix LCD with backlightDisplay unit Double sidesPHYSICAL SPECIFICATIONSBattery power: Voltage DC7.2V
Capacity: Distance and angle measurement
Angle measurement
Lithium battery BDC40L 4.0AH 4.5h 30hTemperature range: Storage temperature -40℃~+60℃ Operating temperature -20℃~+55℃Dimension 190mm×210mm×350mmNet weight 6.0kgOTHERSInterface RS232CWaterproof /Dustproof protection IP54
ISO 9001ISO 9001
B2
ELECTRONIC LASER THEODOLITE TEL100
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TEL100 is an electronic instrument designed for measuring both horizontal and vertical angles in the construction and civil engineering field. The laser spot diameter is 5mm at 100m that ensures pointing accuracy. saving data into internal registering units, or into external data storage devices through software.
● Main unit 1● Software 1● RS232 data cable 1● Rechargeable battery 2● Battery charger 1
● Two sides of large and high resolution screens guarantee
the clear displays● Communication with PC and PDA● Possibility of red laser centering● More suitable for positioning work of long-distance and
bridge projects with the red laser directing● Memory extending available● Easy and direct operation with simple function keys● Display of data and time on screen● Powered by the rechargeable battery ● Rugged, durable, water and dust resistant design
ANGLE MEASUREMENT(Hz, V)Method Incremental grating diskAccuracy 5"Min. reading 1"/5"/10"Tilt sensor ProvidedCompensating range ±3′
Level parameterCircular level 8'/2mmPlate level 30″/2mm
TELESCOPEMagnification 30×Image ErectField of view 1°30′(2.6%)Min. focus 1.3mOptical aperture 45mmLength of sleeve 155mmResolving power 2.5"Stadia ratio 100Stadia constant 0DISPLAY
Screen type 7-segment LCD display with backlight
Display unit Double sidesLASERLaser source Laser diodeLaser wavelength 635nmLaser power 10mWLaser class Class IIEffective range 200mLight spot size 5mm/100mLaser power DC3.3VPHYSICAL SPECIFICATIONS
Operating time 10 hours with rechargeable battery
Storage temperature -40℃~+60℃Operating temperature -20℃~+50℃Dimension 144mm×175mm×324mmNet weight 5.0kgOTHERSInterface RS232CWaterproof /Dustproof protection IP54
● Tool kit 1● Shoulder strap 1● Instruction manual 1● TIME certificate 1● Warranty card 1
ISO 9001ISO 9001
B3
ELECTRONIC THEODOLITE TET100
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TET100 is an electronic inst rument mainly used for measuring both horizontal and vertical angles to high accuracy in the construction and civil engineering field. It performs the necessary operations, saving data into internal registering units, or into external data storage devices through software.
● Main unit 1
● Software 1
● RS232 data cable 1
● Rechargeable battery 2
● Battery charger 1
● Tool kit 1
● Shoulder strap 1
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
● Two sides of large and high resolution screens guarantee
the clear displays
● Communication with PC and PDA
● Possibility of laser centering
● Memory extending available
● Easy and direct operation with simple function keys
● Display of data and time on screen
● Powered by the rechargeable battery
● Rugged, durable, water and dust resistant design
ANGLE MEASUREMENT(Hz, V)Method Incremental grating diskAccuracy 5"Min. reading 1"/5"/10"Tilt sensor ProvidedCompensating range ±3′
Level parameterCircular level 8'/2mmPlate level 30″/2mm
TELESCOPEMagnification 30×Image ErectField of view 1°30′(2.6%)Min. focus 1.3mOptical aperture 45mmLength of sleeve 155mmResolving power 2.5"Stadia ratio 100Stadia constant 0DISPLAYScreen type 7-segment LCD display with backlightDisplay unit Double sidesPHYSICAL SPECIFICATIONSOperating time 10 hours with rechargeable batteryOperating temperature -20℃~+50℃Dimension 144mm×175mm×324mmNet weight 5.0kgOTHERSInterface RS232CWaterproof /Dustproof protection IP54
ISO 9001ISO 9001
B4
AUTO LEVEL AL SERIES
Brief Introduction
Standard Delivery
Optional Accessory
Features
Technical Specifi cation
● AL series are optical instruments mainly used in surveying and building to transfer, measure, or set horizontal levels.It is a high quality, accurate, water resistant and low cost unit ideal for site measurements.
● Main unit 1● Adjusting pin 2● Plummet bob 1● Instruction manual 1● TIME certificate 1● Warranty card 1
● Tripod● Leveling staff
● 7-pieces built-up telescope system gets clearer images
● Exclusive closed magnetic field
● Magnetically-dampened compensator
● Compensator lock
● X-type thread air-damper applied to tilt sensor, high
precision and reliable.
● All metal housings for increased durability
● Top-mounted optical peep-sight for quick reference
● Superior shake-resist, waterproof and dustproof
Magnification 24× 28× 32×
Standard deviation for 1km double run leveling
2.0mm 1.5mm
Image Erect
Objective aperture 36mm
Field of view 1°20’
Shortest focusing distance 0.6m
Stadia multiplying constant 100
Stadia additive constant 0
Reticle shape Cross-shape Wing-shape
Compensator range ±15′
Setting accuracy 0.5” 0.4” 0.3”
Sensitivity of circular bubble 8′/2mm
Graduation interval of circle 1°or 1gon
Water resistance IPX4
Connecting size M16 or 5/8”
Net weight 1.5kg
ISO 9001ISO 9001 LASER TUNNEL DETECTOR TTD100
B5
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TTD100 is designed for detecting the tunnel cross-section fast and accurate, especially for data acquisition in the construction inspection, completion inspection and quality control.
● Main unit 1
● Software 1
● RS232 connecting cable 1
● USB connecting cable 1
● Soft dog 1
● Power charger 1
● Rechargeable battery 2
● Instruction manual 1
● Warranty card 1
● TIME certificate 1
● Tripod
● High-precision angle encoder and laser ranger ● At least 100 sets of cross-section data can be recorded on the scene● Data processing, mapping and reporting can be available with the processing software ● Integrated design, small size, light weight and easy to use● Manual and automatic adjustment are available for full angle location● Special designed battery clip to facilitate the replacement of batteries
Method Angle encoding
Measuring radius 0.3m-60m
Accuracy ±1mm
Measuring time <3mins
Measuring range of angle 30°~330°
Memory for each measurement More than 100 sets
Interface RS232 and USB
Operating temperature -20℃~+60℃
Dimension 150mm×100mm×270 mm
Net weight 4.5 kg
Optional Accessory
ISO 9001ISO 9001
B6
LASER TUNNEL DETECTOR TTD200
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TTD200 not only maintains the original features of TTD100, but also accomplishes the measurement of the front and the back section, set of the working face blast-hole and detection of surrounding rock deformation.
● Main unit 1
● PDA 1
● Software 1
● USB connecting cable 1
● PDA-Main unit control cable 1
● Soft dog 1
● Power charger 1
● Instruction manual 1
● Warranty card 1
● TIME certificate 1
● Tripod
● High-precision angle encoder and laser ranger
● Easy and direct operation with PDA
● Possibility of data processing, mapping and reporting by the processing software
● Capable of optical point indication
● Detection of the current section, the front and the back section
● Function of setting out the profile of the tunnel
● Calculation and storage of the results in real time with PDA
● High accuracy and reliable detection, moisture-proof and dustproof design
Method Angle encoding
Measuring radius 0.3m-60m
Accuracy ±1mm
Measuring range of angle 30°~330°
Resolution 0.01°
Precision of angle Better than 0.1°
Controller PDA
Memory More than 5000 sets
Interface RS232 and USB
Detecting interval between two sections
Twice of the tunnel radius
Operating temperature -20℃~+60℃
Dimension 140mm×100mm×300mm
Net weight 5.2kg
Optional Accessory
ISO 9001ISO 9001 BRIDGE DEFLECTION DETECTOR TBD100
B7
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TBD100 is mainly used for measur ing br idge stat ic and dynamic deflection and detecting large building deformation and the vibration displacement. The powerful software is available for analyzing data.
● Main unit 1
● Photoelectric target 3
● Software 1
● USB connecting cable 1
● Soft dog 1
● Lens hood 1
● Battery charger 1
● Target charger 3
● Magnetic base 3
● Remote 1
● Instruction manual 1
● Warranty card 1
● TIME certificate 1
● Tripod
● Accomplishment of two-dimensional measurements by adopting high-speed area array CCD
● High-speed measurement for dynamic measurement
● Point mode for static measurements
● Auto-calibration
● Static deflection detection up to 20 points (two-dimension)
● Capable of real-time display and storage automatically
● Wireless remote control target
● High performance of vibration resistance
● Software: analysis of maximum and minimum deflection, impact factor, inter val data f requency and power spectrum
Method Photoelectric imaging measurement
Detecting mode Two-dimensional measurement
Detecting distance10-300m (cell targets)300-500m (AC targets)
Resolution Within 1%
Accuracy±0.03mm
(Dynamic measurement at 10m)
Sampling frequency 100Hz
Power Rechargeable lithium battery
Operating temperature -20℃~+50℃
Dimension 355mm×315mm×345mm
Net weight 5.5kg
Optional Accessory
ISO 9001ISO 9001
B8
LASER LEVEL SERIES
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● Laser Level is mainly applied in construction and indoor decoration as well as mapping, machine work, equipment installation, water conservancy installation. It is the best choice of replacement for original tools such as water tube, vertical line, ink line.
● Main unit 1
● Glasses 1
● AA batteries 3
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
● Remote
● Compensation automatically within 3 degree
● Alarm function available while out of compensation range
● Application of the Magnetic-damping compensation system
● Possibility of choosing vertical line (4 vertical lines can make a cross above), horizontal line or letting them work at the same time by pressing “V/H” button which located on control-pad
● Centering by red laser
● Rotation of 360° by hand or remote controller
● 3V1H specification: DIY design, Small portable unit, Down point, Cross on roof and horizontal direction, Special locked function.
1V1H
2V1H
4V4H4V1H
3V1H
Function code 1V1H 2V1H 4V1H 4V4H
Laser class Class II
Laser wavelength 635nm
Vertical accuracy ±1mm at 5m
Horizontal accuracy ±1mm at 5m
Down point ±1mm at 1.4m
Self-leveling range ±3°
Horizontal emissive angle 120°
Vertical emissive angle 150°
Width of line 2mm at 5m
Vertical angle accuracy 90°±0.02°
Power AA batteries×3 (DC4.5V)
Continuous working time About 13 hours ( All the lines working)
Operating temperature -10℃~+40℃
Storage temperature -20℃~+40℃
Screw Length 5/8”
Net weight 1.5kg (Including batteries)
Optional Accessory
ISO 9001ISO 9001 INDUSTRIAL VIDEO BORESCOPE TBS-N SERIES
C1
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TBS-N series borerscope is designed with large diameter for the inspection in special detecting f ield, such as petrochemical, aerospace, dockyard, garage and so on.
● Hand-held controller 1
● USB connecting cable 1
● Probe 1
● Wire (20m) 1
● Roller wheel 1
● Charger 1
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
Optional Accessory ● Supporting frame
● Easy to operate with the hand-held controller● Detecting of pipeline or container by adopting CCD-
sensor and LED-illumination● Possibility of adjusting the focal length easily by motorized
focus ● Convenient inspection with the long cable● Multiple languages menu available● Accomplishing the functions of monitoring, photography,
motorized focus,communication with PC on the hand-held LCD display controller
Model TBS-N22ES TBS-N22EF TBS-N22EW
PROBE
Diameter 22mm
Image sensor CCD
Illumination LED, Adjustable
Length 133mm 120mm
Direction of the lens Round view Front view
Field of view 90° 150°
Focal length Motorized focus
Definition (Vertical) 470 lines
Pixel 542×586
Waterproof N/A N/A YES
HAND-HELD CONTROLLER
Screen type Colorful 4.3” LCD
Memory 30GB
Port USB
Compression format MPEG4
Image format JPEG
Language Multiple
GENERAL
Wire 20m
Power Rechargeable Li battery
Operating temperature -10C°~50C°
ISO 9001ISO 9001
C2
INDUSTRIAL VIDEO ENDOSCOPE TBS-V SERIES
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TBS-V Series is designed for inspecting machine components, motors, pipelines, etc. in industrial filed. It’s got the functions of monitoring, photography, communicating with PC on the hand-held LCD display controller.
● Main unit 1
● Cable(1000×Φ6.0mm) 1
● USB connecting cable 1
● Charger 1
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
● LED lamp to illuminate dark spaces and obscured spaces● Possibility of capturing images and videos● Small cable diameter to access to the area that are
difficult to reach● 2GB internal memory (can be equipped with 8GB SD card)● Convenient inspection with the flexible cable● Long battery life up to five hours continues working● Multiple languages menu available● Water resistant ABS enclosure● Easy to operate with the handheld controller
Model TBS-V6112
Cable diameter Φ6.0mm
Flexible cable length 1000mm
Image sensor CMOS
Resolution 180,000 pixels
Image frequency 30/s
Exposure Automatic
Focal length Prefocus
Field of view 100° (2-way tip articulation)
Depth of field 20-100mm
Illumination LED
Display 3.5" LCD
Port USB
Memory2GB internal memory (can be equipped
with 8GB SD card)
Compression format MPEG4
Image format JPEG
Power Rechargeable Lithium-Ion battery
Operating temperature -10 to 50ºC
Net weight 450g
ISO 9001ISO 9001 INDUSTRIAL FIBERSCOPE TBS-F/FI SERIES
C3
Brief Introduction
Features
Technical Specifi cation
● TBS-F series fiberscope is designed with small diameter for the inspection of machines. TBS-FI series fiberscope works with optical cable and cold light source. Both series fiberscope are always for inspecting small components of machines and systems in laboratories and production line.
Standard Delivery (TBS-F) ● Fiberscope 1
● AAA batteries 3
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
Standard Delivery (TBS-FI) ● Fiberscope 1
● Cold light source 1
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
Optional Accessory for TBS-F● Video monitor
● Connecting cable
● Adapter
● Easy to operate with the handle● Visual information transferred by thousands of optical fibers● Two sets of optical fibers, one is for light guide, another is for
image transmission● Convenient inspection with the optical cable● Possibility of connecting video monitor with adapter and
the connecting cable ● Possibility of capturing images and videos with the video
monitor
Model TBS-F612D TBS-FI512D
FIBERSCOPE
Cable diameter Φ6.0mm Φ5.0mm
Flexible cable length 1000mm 1000mm
Field of view 100° (2-way tip articulation)
Source of cold light N/A 100W
Power AAA batteries×3 230V-mains power
Operating temperature -10 to 50ºC
Net weight Fiberscope 300g Fiberscope 300gCold light source 4.5kg
VIDEO MONITOR
Display 3.5" LCD
N/A
Port USB
Compression format MPEG4
Image format JPEG
Power Rechargeable Lithium battery
ISO 9001ISO 9001
D1
AC YOKE-MAGNETIC PARTICLE FLAW DETECTOR TCJE
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● Magnetic Particle Testing (MPT) is a NDT method used to detect surface and near surface flaws in ferromagnetic materials. The technical principle is that magnetic lines of force (flux) are distorted by the presence of a flaw in a manner that will reveal it's presence. The flaw (for example, a crack) is located from the "flux leakage", following the application of fine iron particles, to the area under examination. For near surface defects, the effectiveness quickly diminishes depending on the flaw depth and type. The image is more sharp if the flaw is closer to the surface.
● Power box 1
● Magnetic yoke (≥44N) 1
● Power cord (30m) 1
● Black magnetic
powder (≥300 mesh) 50g
● Light bulb (6.3V) 2
● Fuse (5A) 2
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
● Applied for detecting weld seam of the interior wall of large sphere tank,steel parts and fillet weld
● Light weight and adjustable distance between magnetic poles
● Work in AC field for detection of surface and demagnetizing after inspection
● TCJE-2: adjustable the direction of the probe
Model TCJE-1 TCJE-2
Input power supply 220V/50Hz 220V/50Hz
Output voltage 36V 39V
Magnetizing current 3.5A 5A
Magnetization method
AC AC
Probe A A
Lifting force
Model A≥49N(5kg)
Model D≥117.6N(12kg)
Model E≥117.6N(12kg)
Distance between magnetic poles
Model A: 20-160mm
Model D: 60-220mm
Model E: 100mm
Model O: interior diameter 185mm
Net weight 8.0kg 12.0kg
ISO 9001ISO 9001 LOW-FREQUENCY MAGNETIC FLAW DETECTOR TCLF
D2
Brief Introduction
Features
Technical Specifi cation
● TCLF ser ies summarized the mer i ts of inspection by direct and alternating currents. The f law-detect ing depth is improved by adopting low-frequency electric current, and this pulsating current can enable the sl ight vibration of the magnetic powder ranks, which facilitates the permutation of the magnetic powder and forms the magnetic mark. it is widely used in the shipyard, aerospace, steel, mill, foundry, weldment or vehicle inspection.
Standard Delivery ● Power box 1
● Horseshoe probe 1
● Connecting cable 1
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
● Completely portable single-handed operation● Reliable location of defects in ferrous metals● The deeper penetrating depth by the magnetic field ● Find of artificial crackle (0.1×2×30mm) at 6mm under the surface● Perfect float of magnetic particles for easy to be absorbed on the defects● No need to demagnetize after flaw detection● Detection directly without any process on the surface
Model TCLF-J50D TCLF-Z12D
Power supply mode AC + low frequency DC + low frequency
Max. power 400W 50W
Output voltageAC:220V
Low frequency: 70-140VDC:12V
Low frequency: 7-36V
Working current2.4A
( pulsating current >10A)2A
( pulsating current >6A)
DC resistance 8.5Ω
Probe shape Horseshoe
Probe span 50-300mm (Adjustable) 50-200mm (Adjustable)
Lifting force ≥4.5kg in AC ≥18kg in DC
Detection depth 3-6mm (Low frequency)
Frequency of current Adjustable
Power 220V AC Rechargeable
Dimension
Probe 200mm×50mm×150mm 208mm×48mm×148mm
Power box
130mm×112mm×46mm 260mm×220mm×100mm
Netweight
Probe 3.6kg 3.2kg
Total 6.0kg 7.5kg
ISO 9001ISO 9001
E1
HOLIDAY DETECTOR DJ SERIES
Brief Introduction
Features
Technical Specifi cation
● DJ ser ies are designed for quick inspecting a wide range of non-conductive coatings and linings for pinholes, porosity and other faults by means of pulsed voltage in the non-destructive testing field. It is widely used in the petro-chemical, pipe mills, plastic fabrication and aerospace industries.
Standard Delivery ● Main unit 1
● High voltage detector 1
● Brush probe 2
● Brace rod 1
● Earth lead 1
● Earphone 1
● Power charger 1
● Fuse 2
● Shoulder strap 1
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
Optional Accessory
● Arc-shaped brush ● Circle probe
● Display of output high voltage directly ● Clear LCD with blue backlight ● Switch off automatically● State of charge indicator● DJ-6(A): mainly used for the antisepsis of pottery● DJ-6(B): mainly used for petroleum pipeline (High voltage)● DJ-9: displays holidays of antisepsis coating on two digital
tube
Model DJ-6(A) DJ-6(B) DJ-9
Thickness detection 0.03-1.0mm 0.5-10mm
Output voltage 30V-1000V 0.5KV-30KV (Adjustable)
DC voltage 12V
Consumed power 6W
Alarm Both earphone and buzzer
Display Three digit LCD, Fully touch screen
Dimension 220mm×130mm×88mm
ISO 9001ISO 9001 UNDERGROUND PIPE AND CABLE LOCATOR TUP SERIES
E2
Brief Introduction
Features
Technical Specifi cation
● TUP Series image the subsurface wires, cables and pipes by the electronicmagnetic wave transmission in non-destructive testing field. It provides precise pinpointing of buried services, which can be used in the field of petroleum and chemical, rock, soil, ice, fresh water, pavements and structures.
Standard Delivery ● Tube-like probe 1
● Detecting cable 1
● Output cable 1
● Earth lead 1
● Ground rod 1
● File 1
● Magnet 1
● 220V power cord 1
● Power charger 1
● 1A fuse 1
● Instruction manual 1
● TIME certificate 1
● Warranty card 1
● Quick charge automatically● Auto switch the signals of the output voltage and the
output current● DC-AC power conversion automatically ● Application of the high anti-interference technique ● Large and high resolution screen guarantees the clear
display● Auto functions of protection and adjustment● Three-proofing design and modular structure for better
reliability
Model TUP100 TUP200 TUP300 TUP400
TRANSMITTER
Rated output0-25W 0-25W 0-30W
Adjustable Adjustment automatically, Servo control
Signal Low frequency modulation signal
Frequency 1K±0.1Hz 1KHz
Output resistance 0-500ΩManually match
5-500ΩAutomatically match
5-1000ΩAutomatically match
Transmitting distance 0.03m-5KmExtension to further than 5Km gradually
0.03m-8Km, Extension to further than 8Km
gradually
Working voltage 12V NiMh battery pack
12V Built-in NiMh battery pack
12.8V Built-in Li battery pack
Operating temp. -10℃~+50℃ -20℃~+60℃ -30℃~+60℃
Control system Analog signal DSP+ Vector control, System update available
Adjustment system Numeric keypad Numeric knob Numeric keypad
Weight 2.8kg without battery 3.0kg with battery 7.0kg with battery
Dimension 255mm×255mm×100mm 276mm×227mm×98mm 456mm×335mm×133mm
PIPE LOCATOR
Sensitivity -56db -65db -85db
Positional deviation ≤10cm ≤5cm
Depth measurement ≤5m ≤8m ≤10m
Working voltage 9.6V NiMh battery pack 9.6V Li battery pack
Dimension 165mm×155mm×68mm 165mm×110mm×68mm
HOLIDAY DETECTOR
Accuracy ≥0.5mm 0.25mm
Positional deviation ≤10cm ≤5cm
Working voltage 9.6V NiMh battery pack 9.6V Li battery pack
Dimension 165mm×155mm×68mm 165mm×110mm×68mm
ISO 9001ISO 9001
F1
PORTABLE COLOR DIFFERENCE METER TCD100
Brief Introduction
Features
Technical Specifi cation
● TCD100 is a l ight-sensit ive instrument mainly used in colorimetry for measuring and psychophysical analysising the color of an object or color sample. This portable colorimeter is easy to use and can be carried anywhere, irrespective of environmental conditions.
Standard Delivery ● Main unit 1
● Software 1
● USB connecting cable 1
● Batteries AA 1.5V 2
● Power supply 1
● Instruction manual 1
● TIME certificate 1
● Warranty cardt 1
● Easy and direct operation with the simple function keys● Display directly color difference by △E*ab, △L*a*b
CIE_L*a*b, CIE_L*c*h● Silicon photodiode as light sensors for analyzing the
absorption spectra ● Standard deviation within △E*ab0.2 (Test condition:
choose average values by 12 pcs white tabula)● Possibility of measuring any color of smooth surface● LED illumination available● Communication with PC the practical software
Test accuracy Within 0.2△E*ab
Color space △E*ab, CIE_Lab, △L, △a, △b, CIE_Lch
Measuring range L: 0~100 a:-128~127 b:-128~127
Measuring time About 3 seconds
Measuring interval About 2 seconds
Measuring aperture Ф8mm
Automatic shutdown Automatic shutdown after 5 minutes waiting
MemoryKeep a group of data automaticly
(Without connecting to PC)
Field of view 10°regulated by CIE
Light source C light source
Sensor Correct silicon photodiode (seed array)
Screen type LCD with backlight
Power 1.5V AA batteries×2, DC/5V (1.5A)
Operating environment
0℃~+40℃;lower than 85% relative humidity
Dimension 170mm×50mm×48.8mm
Net weight 204g ( without batteies)
ISO 9001ISO 9001 PRECISE COLOR READER TCR200
F2
Brief Introduction
Standard Delivery
Features
Technical Specifi cation
● TCR200 is a light-sensitive instrument mainly applied for the quality control in the field of plastic, painting, design, plating, costume, printing and dye. It works well for routine comparisons of similar colors and some advanced functions for color analysis can be accomplished.
● Main unit 1● Software 1● USB connecting cable 1● Standard black cavity 1● Standard white tabula 1● Batteries AA 1.5V 4● Power supply 1● Instruction manual 1● TIME certificate 1● Warranty card 1
● The 2.4" width colorful screen and portable design● Possibility of measuring any color of smooth surface● Display directly color difference by △E*ab, △L*a*b
CIE_L*a*b, CIE_L*c*h, XYZ, RGB● SC I and SCE inspect ing sys tems se lectab le and
metamerism analysis for different working status● Three inspection conditions available● Professional color analysis software for the color data
analysis and color difference diagrammatic output● Tolerance sett ing, humanizational auto-judge color
difference values and color deviation for judging the color easily
Repeat accuracyWithin E*ab0.08 (interval measuring
30 times after calibrating white tabula)
Error Within E*ab0.5
Color spaceXYZ, RGB, L*a*b, L*C*H, △E*ab, △L*a*b*,△L*c*h*
Lighting/inspecting system
8/d(8°Falloff/diffuse reflection)SCI(include Flat Mirror Light)
SCE(eliminate Flat Mirror Light)
Light source White light source
Measuring aperture 8mm
Field of view 10°regulated by CIE
Inspection condition D65, D50, F11
Memory13 groups of sample and 30 data for each
sample(Without connecting to PC)
Interface USB and RS232C
Power1.5V AA batteries×4, AC-DC alternating
current
Operating environment0℃~+70℃;
lower than 85% relative humidity
Dimension 77mm×86mm×210mm
Net weight 550g ( without batteies)