running magnet 2.0 recessed - architectural.flosusa.com€¦ · fun with magnets and light....

Fixture Type

Job Name

Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture

Description

Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet isflexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined.Light elements snap in place and connect automatically though the magic of magnets.Extruded aluminum housings create a clean 1-3/8-inch slot and preconfigured cornerscomplete the system that can run up, around and across walls and ceilings. Finishes alignperfectly, always, because Running Magnet can be easily cut on site (except SuspensionUp&Down). Linear LED and accent fixtures, available in a variety of sizes, can be exchangedand repositioned quickly, without tools, with artistic results. The Running Magnet is perfectfor retail displays where frequent changes are typical and absolute performance is mandatory.

Construction

Extruded aluminum housing with integral DALI controllable track system.

Flanges for 5/8”. Also 1/2” flanges availableask Flos for part numbers.

F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2

of 10

For more information contact your representative or go to architectural.FlosUSA.com. ©2019 Specifications and dimensions subject to change without notice. Issued 01.07.2019

Photometrics

For current IES files please visitarchitectural.flosusa.com

Notes

Consult factory for other ceiling typesincluding accoustic tile ceilings and wood.

Listings: UL Listed, IP20 dry location only, Class 2, Meets California standards forcommercial interiors.

Recessed Profile

Trimless extruded aluminum profile to berecessed in sheet rock ceilings and walls(1/2” or 5/8” thick).

Linear profiles available as feed profiles toconnect to a driver and intermediate profilesto fill in remaining lengths.

Each feed profile comes with two end caps.

Available lengths: 39.4”, 59”, and 78.7” and98.4”

All linear profiles are field cuttable.

Corners available for continuous runs.

Track can be powered through corners.

Corners are not field cuttable.

Warranty

2 years from date of sale.

UP & DOWNSUSPENSIONRECESSED SURFACE

Lamps

Multi Spot: 10W, 4x210lm, 2700K, CRI 8010W, 4x210m, 3000K, CRI 80

Mini Glo-ball: 7W, 800lm, 2700K, CRI 807W, 880lm, 3000K, CRI 80

Mini Glo-Ball S:3.5W, 400lm, 2700K, CRI 803.5W, 440lm, 3000K, CRI 80

Find Me Suspension: 8W, 560lm, 2700K, CRI 908W, 600lm, 3000K, CRI 90

Spot Module:8W, 600lm, 3000K, CRI 908W, 550lm, 2700K, CRI 90

Light Strip, 11.8’’:7.5W, 460lm, 3000K, CRI 907.5W, 435lm, 2700K, CRI 90

Light Strip 23.6’’:15W, 920lm, 3000K, CRI 9015W, 870lm, 2700K, CRI 90

Light Strip 35.4’’:22.5W, 1380lm, 3000K, CRI 9022.5W, 1305lm, 2700K, CRI 90

Light Strip 47.2’’:30W, 1840lm, 3000K, CRI 9030W, 1740lm, 2700K, CRI 90 Spot 120:12.5W, 1060lm, 3000K, CRI9012.5W, 985lm, 2700K, CRI90

Anthony Spot:16W, 1404lm, 3000K, CRI9016W, 1310lm, 2700K, CRI90

Electrical

24V electrical systemlimited to a maximumload of 4A and 100W per driver.

Spot and linear luminaires available withindividually addressable DALI circuitry,0-10V Dimming (from 10% up to 100%) or built-in dimmer on each fixture head.

0-10V Fixtures come from the factory set up atthe lowest level 10% they always required a0-10V signal to achieve the maximum output.

EC to supply site cabling from driver to tracklocation and site UL listed enclosure.

Fixture Type

Job Name



of 10


Luminaries

Light Strip Module HE

Find Me Suspension

Spot 120Spot Module Multi Spot

Mini Glo-Ball Mini Glo-Ball Suspension

Anthony Spot Track

How to Specify

Part Number Dimming Protocolor

Variant

Finish

0 3 7 0 0 0 1 94 0

Fixture Type

Job Name


2.04‘‘


of 10


Profiles

The extruded aluminum housing creates a clean 1-3/8” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete thesystem. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, andintermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed untilafter installation.

Both profile types can be cut to different lengths in field.

3.4

‘‘1.4‘‘

4.9‘‘

L

Length Part Number Feed Profile

06.1638

06.1639

06.1640

06.1641

39.4’’ (1m)

59’’ (1.5m)

78.7 (2m)

98.4 (2.5m)

06.1643

06.1644

06.1645

06.1646

Part NumberIntermediate Profile

VariantFinish

14 = Black

How to Specify ex. 06.1638.14.90

.90 = UL Listed

Fixture Type

Job Name



of 10


Optional Profile Mounting Kits

Horizontal 90º Corner

Inside Corner

Outside Corner

Fixed Low-Clearance Mounting Kit ( 2 units)

End Cap kit ( 2 units)Includes the End Feed connector

08.8866.14

08.8867.14ULAdjustable Ceiling Kits (2 units)

For easier installation without blocking rough-in.

Profile Quantities Ceiling kit

2

3

1000 mm/ 1500 mm [39.37’’ / 59.06’’]

2000 mm/ 2500 mm [78.74’ / 98.42’’’]

08.8865.14A90

Corners

5.9‘‘

5.9‘‘

3.15‘‘

3.15‘‘

5.9‘‘

5.9‘‘

Dimension

Dimension

Dimension

Part Number 90º Corner

Part Number Inside Corner

Part Number Outside Corner

5.9’’ x 5.9’’

3.15” x 3.15”

5.9’’ x 5.9’’

06.1648

06.1650

06.1651

.90 = 5/8’’ Ceilingthikness



Finish Variant

Variant

Variant

Finish

Finish

14 = Black

14 = Black

14 = Black




Description Part Number DrawingImage QTY

Fixture Type

Job Name



of 10


Required Drivers

QTY Image

LEDSB60W24V-NDM-D01

LEDSB60W24V-NDM-U01

LED power supply source for remote installation,24V/60W, 120-277V, Magnitude, UL Listed

LED power supply source for remote installation,24V/60W, 120-277V, ERP, UL Listed

LEDSB96W24V-NDM-D01

LEDSB96W24V-NDM-U01

LEDSB30W24V-NDM-D01

LEDSB40W24V-NDM-U01





Item Number Description Drawing

12.1”

6.8”

7.4”1.4”

1.45”

1.37”7.12”

2.36”

11.4”

11.7”

3,3”

75.18 ”

59.82 ”

24.9”

102.6”

205.2”

Dimming controllers

Dimming Control Unit Box 24V 0-10VRequired for a 0-10V Dimming installation. 1 DCU can control up to 25 fixtures08.0613.14A

3,3” 0.66”

2.1

4”

Image Part Number Description DrawingQTY

Fixture Type

Job Name



of 10


Light Strip Module HE

Spot Module

CCT CRI

90

90

90

90

3000

2700

3000

2700

3000

2700

3000

2700

440460

880920

13201380

17601840

435435

833870

12491305

16651740

7.5W 105º

15W 105º

22.5W 105º

14 = Black

30W 105º

03.7001

03.7000

03.7003

03.7002

03.7005

03.7004

03.7007

03.7006

11.8’’ (300mm)

23.6’’ (600mm)

35.4’’ (900mm)

47.2’’ (1200mm)

Delivered LumensInitial Lumens

Watts BeamSpread

Part NumberLight Strip Length Finish Dimming Protocol

6.7‘‘

1.97‘

‘

ø 1.34‘‘

Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically withmagnets. Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V from 10-100%. Clear end caps included for continuous look when installing end-to-end.

Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V (from 10-100%). Standard beam spread is 14°. Additional interchangeable lenses available in23° and 33°, and 10° x 40° elliptical beam spread.

90º

360º

Optional Accessories

08.8760.00

08.8761.00

08.8759.00

08.8427.14

Flood Lens Accessory 23°

Wide Flood Lens Accessory 33°

Elliptical Lens Accessory

Extra long snoot for added shielding in aluminumwith black finish (does not protude from channelwhen tucked up into housing)

Initial Lumens

CRI CCT DeliveredLumens

418

404

600903000

550902700

8W

8W

14º

14º

03.6302 A90 = Dimmable on board

ADD = DALI

A9V = 0-10V03.6303

Watts BeamSpread

Part Number Finish Dimming Protocol

2.8

‘‘1.

3‘‘

SEE TABLE

5.16‘‘

.90 = Dimmable on board

.DD = DALI

.9V = 0-10V

14 = Black

Part Number DescriptionImage


How to Specify ex. 03.6302.14A90

Fixture Type

Job Name



of 10


Multi Spot 4

Spot 120

4 accent Spot LED module can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture (from 20-100%), DALI and 0-10V (from 10-100%). Standard beam spread is 14° additional interchangeable lenses available in20° and 30°, and elliptical beam spread

Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage converter. Built-in dimming knob on board fixture (from 39-100%), DALI and 0-10V (from 10-100%) Standard beam spread are 25º and 33º. Honeycomb and cross baffle included.


08.8760.00

08.8761.00

08.8759.00

Flood Lens Accessory 20°

Wide Flood Lens Accessory 30°

Elliptical Lens Accessory

CCT

* Dimmable on board 12.5W, DALI and 0-10V Dimming fixtures are 14W

CRI

90

90

90

90

2700

2700

3000

3000

706985

430985

7311060

4441060

12.5W14W

12.5W14W

25º

33º

03.6285

03.6284

03.6286

03.6287

DeliveredLumens

Initial Lumens

Watts* BeamSpread

Part Number Finish Part Number 0-10V Dimming

2.7‘‘

0.8

7‘‘

1.57‘‘

7.87‘‘

1.3‘‘

ø 1.8‘‘

4.8‘‘

5.1‘‘

4.7‘‘

14 = Black

40 = White

Initial Lumens


674

630

4 X 210903000

4 X 210902700

10W

10W

11º

11º

03.6306

03.6305

Watts BeamSpread

Part Number Finish Dimming Protocol

14 = Black

.90 = Dimmable on board

.DD = DALI

.9V = 0-10V

.90 = Dimmable on board (12.5W)

.DD = DALI (14W)

.9V = 0-10V (14W)




Fixture Type

Job Name



of 10


Anthony Spot

Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage converter. Built-in dimming knob on board fixture(from 39-100%), DALI and 0-10V (from 10-100%) Standard beam spread are 15º and 22º.

Initial Lumens


1010

1052

1085

1129

1310

1310

90

90

2700

2700

1404

1404

90

90

3000

3000

16W

16W

16W

16W

15º

22º

15º

22º

03.6277

03.6274

03.6278

03.6275

Watts BeamSpread

Part Number Dimming ProtocolFinish

22‘‘

40

‘‘

165’

’

ø 110‘‘

130‘‘

14 = Black

40 = White

14 = Black

40 = White

14 = Black

40 = White

14 = Black

40 = White


08.8418.68A

08.8419.14A

08.0050.00

Elliptical lens

Honeycomb

Flood lens. To obtain flood optics (35º) order Anthony Spot Medium + flood lens.

A90 = Dimmable on board

ADD = DALI

A9V = 0-10V



Fixture Type

Job Name



of 10


Other Light Module

Mini Glo - Ball SuspensionMini Glo -Ball Find Me Suspension

Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic ofmagnets. Built-in dimming knob allows fixture to dim from 20-100%, DALI and 0-10V from 10-100%.

CCT

CCT

CRI

CRI

80

80

80

80

3000

3000

2700

2700

880

440

528

271

800

400

488

259

7W

3.5W

7W

3.5W

03.6261

03.6263

03.6260

03.6262

Initial Lu-menss

Initial Lumenss

Delivered Lu-menss

Delivered Lu-menss

Watts

Watts

Part Number

Part Number

Dimming Protocol

Dimming Protocol

Dimming Protocol

2.8‘‘

2.8‘‘

2.8‘‘

3.3‘‘ 118‘‘

118‘‘

3.6‘‘

8.7‘‘

ø 4.3‘‘

ø 4.3‘‘

ø 1.3‘‘

[300

0 m

m]

MA

X.

[300

0 m

m]

MA

X.

5.11‘‘ 5.07‘‘ 5.11‘‘

CCT CRI

90

90

3000

2700

600 365

560 344

8W 14º

8W 14º

03.6273

03.6272

Initial Lumens DeliveredLumens

Watts Beam Spread

Finish

Finish

Finish

Part Number

Mini Glo - Ball

Mini Glo - Ball Suspension

Find Me Suspension

14 = Black

14 = Black

14 = Black

06 = Chrome

30 = White

How to Specify ex. 03.6260.30B90

How to Specify ex. 03.6263.30B90

How to Specify ex. 03.6273.30C90

B90 = Dimmable on board

.DD = DALI

.9V = 0-10V

B90 = Dimmable on board

.DD = DALI

.9V = 0-10V

C90 = Dimmable on board

.DD = DALI

.9V = 0-10V

Fixture Type

Job Name



of 10


Visit FLOS Worldwide YouTube channel for installation videos

How to Specify

A. Select and position corners

1. Horizontal - Connect sections on flat surfaces (90º corner) 2. Inside - Transition from wall to ceiling (inside corner) 3. External - Turn outside corners for walls and soffits (270° corner)

B. Fill lengths between corners with Linear Housings

3.3’, 4.9’, 6.6’ or 8.2’ sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together.

C. Drivers

Quantity of drivers determined by total wattage or light elements in section (approximately one every 10 feet). Maximum driver distance is 15’. Locate drivers nearby. Dimming hardwires into profile, bypasses driver.

D. Select Spot heads

Linear strips are available in five nominal lengths: 1’, 2’, 3’, 4’ and 5’. Individual units can be adjusted from 20-100% with a built-in dimming knob and DALI and 0-10V from 10-100%

running magnet 2.0 recessed - architectural.flosusa.com€¦ · fun with magnets and light....

Documents