8/16/2019 RT_Level2.pdf

http://slidepdf.com/reader/full/rtlevel2pdf 1/2

RADIOGRAPHIC TESTING (RT) LEVEL 2 TRAINING

The radiographic testing course is for NDT personnel wishing to carry out

radiographic testing, this course incorporates interpretation of the radiograph in

addition to the techniques used to create the radiograph. The participants will receive

full instruction on darkroom prosess/procedures and radiographic interpritation. To

carry out radiographic testing, a basic radiation safety certificate must be obtained. It

is fully supported by practical sessions and lectures corresponds to the NAS 410 or

EN 4179 Specifications. Lecture notes, text book and necessary testing materials are

provided.

Contents:

Types of Defects

Fundamentals of Radiography

Radiographic Inspection Hardwares

Radiation Sources

Radiation Safety Methods

Radiographic Processing Methods

Production of Radiography

Film Processing Procedures

Increasing Radiographic Image Quality

Definition of Film Image

Radiographic Control Applications

Process Control

Process Control Applications

Writing of Reports, Instructions and Procedures

Learning Objectives or How You Will Benefit:

 At the conclusion of this course the participant (student) should be able to:

Describe the basic principles of the Radiographic test method;

Perform different applications of Radiographic test method;

Define the different types of the discontinuities/defects detected with the

Radiographic test method;

Describe the cause and effect of various types of discontinuities/defects;Describe the operational steps in the Radiographic test and understand the

importance of each step ;

Perform an Radiographic examination following a written procedure;

Manually process film for high contrast and resolution;

Interpret and evaluate the test results with respect to the applicable standards;

Know an overview of the safety precautions necessary when using ionizing

radiation;

Have an overview of film interpretation;

Complete the required test reports, and prepare a clear and concise writteninstruction;

8/16/2019 RT_Level2.pdf

http://slidepdf.com/reader/full/rtlevel2pdf 2/2

Target Group: 

Non-Destructive Testing Personnel

Duration: 

Totally 60 hours40 hours for Theoretical training

14 hours for Practical training and OJT

6 hours for Examinations

Number of Participants: 

Maximum 10 participants

Prerequisites:

Personnel have enough experience according to EN 4179 / NAS 410 Specifications.

Remarks:

 After the training, average score must be 80/100 for throughout examinations. The

minimum passing mark for each exam which includes general, special and practice

exam must be greater than 70 %. Participants will receive an attendance and

achievement paper upon successful completion of the course.