r&s osp-b200r/b200s2 user manual - rohde & schwarz · 2020. 7. 4. · 1.1 user manual...
TRANSCRIPT
R&S®OSP-B200R/B200S2 Satellite System for R&S®OSP User Manual
Use
r Man
ual
1178.6733.02 – 01
The User Manual describes the following R&S®OSP-B200R/B200S2 models and accessories:
● R&S®OSP-B200R/B200S2 (1528.3140.02) ● R&S®OSP-B200R/B200S2 (1528.3140.04) ● R&S®OSP-B200S2 (1528.3134.02) ● R&S®OSP-B200S2 (1528.3134.04) ● R&S®OSP-B200P (1528.3205.02) ● R&S®OSP-Z200A (1528.3170.02) ● R&S®OSP-Z200B (1528.3170.04) ● R&S®OSP-Z201A (1528.3186.02) ● R&S®OSP-Z201B (1528.3186.04) ● R&S®OSP-Z201C (1528.3186.06) ● R&S®OSP-Z202AF (1528.3192.02) ● R&S®OSP-Z202BF (1528.3192.04)
© 2017 Rohde & Schwarz GmbH & Co. KG Muehldorfstr. 15, 81671 Munich, Germany Phone: +49 89 41 29 - 0 Fax: +49 89 41 29 12 164 E-mail: [email protected] Internet: http://www.rohde-schwarz.com Subject to change – Data without tolerance limits is not binding. R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners. The following abbreviations are used throughout this manual: R&S®OSP-B200R/B200S2 is abbreviated as R&S OSP-B200R/B200S2
1178673301_01_01_man_1_en__001-0002
R&S OSP-B200R/B200S2 Contents
User Manual 1178.6733.02 - 01 3
Contents 1 Documentation Overview ................................................................... 5
1.1 User Manual .................................................................................................................. 5 1.2 Operating Manual of the Switch Unit ......................................................................... 5 1.3 Help ............................................................................................................................... 5 1.4 Basic Safety Instructions ............................................................................................ 5 1.5 R&S OSP on the Internet ............................................................................................. 5
2 Preface ................................................................................................. 7
3 Functional Description ....................................................................... 8
3.1 Satellite System ........................................................................................................... 8 3.2 Description of the R&S OSP-B200R........................................................................... 8 3.3 Description of the R&S OSP-B200S2 ......................................................................... 9 3.4 Accessories for the R&S OSP-B200 Satellite System............................................10 3.5 Installing R&S OSP-200R in the R&S OSP Switch Unit .........................................11 3.6 Installing Modules in the Satellite Unit R&S OSP-B200S2 ....................................13
4 Operating the R&S OSP Satellite System ....................................... 14
4.1 R&S OSP Satellite System with Wired Link ............................................................14 4.2 R&S OSP Satellite System with Fiber-Optic Link ...................................................15 4.3 Switching on the R&S OSP Satellite System ..........................................................15
5 R&S OSP Satellite System Interface ............................................... 17
5.1 Connectors of the R&S OSP-B200R Module ...........................................................17 5.2 Connectors of the R&S OSP-B200S2 Satellite ........................................................17 5.3 Power Consumption ..................................................................................................18
Figures
Figure 3-1: Module R&S OSP-B200R ............................................................................ 8 Figure 3-2: Module R&S OSP-B200S2 Front view ......................................................... 9 Figure 3-3: Module R&S OSP-B200S2 Rear view ......................................................... 9 Figure 3-4: Installation of the OSP-B200R module ..................................................... 11 Figure 3-5: Connection of the OSP-B151 interface ...................................................... 13 Figure 3-6: Module with Slot B front panel removed. ................................................... 13 Figure 5-1: OSP-B200R Module connectors ................................................................ 17 Figure 5-2: OSP-B200S Rear side connectors ............................................................. 17
1178673301_01_01_man_1_en__002-0016
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Documentation Overview
User Manual 1178.6733.02 - 01 5
1 Documentation Overview This section provides an overview of the R&S®OSP-B200R/B200S2 user documentation. Unless specified otherwise, you find the documents on the R&S OSP product page at www.rohde-schwarz.com/manual/osp
1.1 User Manual
Contains the description of all functions of the R&S®OSP-B200R/B200S2. The user manual supports you during your first experience with the product, from installation and configuration to interfaces. It provides explanations, step-by-step procedures, figures and examples.
The user manual is available for download on the Internet.
1.2 Operating Manual of the Switch Unit
Contains the description of all instrument modes and functions of the R&S OSP Open Switch and Control Platform (switch unit). It is available for download on the Internet.
1.3 Help
The R&S®OSP-B200R/B200S2 are operated by the software R&S OSP Panel. The software-embedded help content provides quick, context-sensitive access to information for the application of the modules and switch units.
The software is available at www.rohde-schwarz.com/software/osp
1.4 Basic Safety Instructions
Contains safety instructions, operating conditions and further important information. The printed document is delivered with the switch unit.
1.5 R&S OSP on the Internet
The website www.rohde-schwarz.com/product/osp provides:
● Key facts, features and options for the family of R&S OSP switch units ● Rohde & Schwarz contacts for information, quotes, demos and calibration
services ● Technical documentation (operating manual for R&S OSP switch units) ● Brochures and Data Sheets ● Application Notes ● Drivers
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Documentation Overview
User Manual 1178.6733.02 - 01 6
● The current firmware version with OSA and release notes ● The R&S OSP Panel software with release notes ● Related documents and articles ● News and information on software updates ● Service Manual (only for registered users)
Brochures and Data Sheets The data sheet contains the technical specifications of the R&S OSP. It also lists the options and their order numbers, and optional accessories.
The brochure provides an overview of the instrument and deals with the specific characteristics. See www.rohde-schwarz.com/brochure-datasheet/osp
Application Notes Application notes and application cards deal with special applications or background information on particular topics. See www.rohde-schwarz.com/application/osp
Drivers
Up-to-date instrument drivers are available for download at www.rohde-schwarz.com/driver/osp
Release Notes and Open Source Acknowledgment (OSA)
The release notes list new features, improvements and known issues of the current firmware or software version and describe the installation.
The open source acknowledgment document provides verbatim license texts of the used open source software.
See www.rohde-schwarz.com/firmware/osp and www.rohde-schwarz.com/software/osp
Service Manual
The service manual of the R&S OSP describes handling failed modules, module replacement and troubleshooting. It also contains spare part lists and mechanical drawings. The service manual is available for Rohde & Schwarz personnel, only.
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Preface R&S OSP on the Internet
User Manual 1178.6733.02 - 01 7
2 Preface This manual describes the satellite options for the R&S OSP family:
● R&S OSP-B200R Remote control module for one satellite OSP-B200S stock no 1528.3140.02 / 04
● R&S OSP-B200S2 Satellite unit with two standard R&S OSP module slots stock no 1528.3134.02 / 04
Together with the different accessories like cables and power supply.
The satellite options R&S®OSP-B200R/B200S2 can be operated only in connection with one of the R&S OSP switch units R&S OSP120, R&S OSP130 or R&S OSP150. For all information related to these switch units, refer to the R&S OSP manual.
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Functional Description Satellite System
User Manual 1178.6733.02 - 01 8
3 Functional Description
3.1 Satellite System
The R&S OSP satellite system is the transparent extension of two R&S OSP module slots via a cable connection or fiber-optic link. The advantages of the OSP satellite system are:
● Switch modules can be operated “on-site”. For example, high-frequency relays can be installed and controlled at the shortest possible distance.
● The non-conductive fiber-optic link avoids electromagnetic interference. ● The fiber-optic cables allow long distance connections. ● The fiber-optic cables can be easily fed through the shielding of anechoic
chambers.
3.2 Description of the R&S OSP-B200R
The option R&S OSP-B200R is the remote control (RC) interface module for operating the R&S OSP satellite unit R&S OSP-B200S. The single-slot RC module is designed to be installed in one of the base units R&S OSP120, R&S OSP130 or R&S OSP150.
Figure 3-1: Remote control interface module R&S OSP-B200R
Two versions of the R&S OSP-B200R module are available:
Modell No. Description Characteristics Comment
1528.3140.02 Remote control (RC) interface module for for
one satellite unit R&S OSP-B200S2
Electrical interface
1528.3140.04 Fibre-optic and electrical interface
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Functional Description Description of the R&S OSP-B200S2
User Manual 1178.6733.02 - 01 9
3.3 Description of the R&S OSP-B200S2
The module R&S OSP-B200S2 is the satellite unit for the R&S OSP family. It offers two slots for standard size OSP modules
Figure 3-2: Front view of R&S OSP-B200S2 satellite with two modules (OSP-B128 and -B102)
Figure 3-3: Rear view of R&S OSP-B200S2 satellite unit with interface connectors
Two versions of the R&S OSP-B200S2 satellite unit are available:
Modell No. Description Characteristics Comment
1528.3134.02 R&S OSP satellite unit
Electrical interface
1528.3134.04 Fibre-optic and electrical interface DC input 28 V
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Functional Description Accessories for the R&S OSP-B200 Satellite System
User Manual 1178.6733.02 - 01 10
3.4 Accessories for the R&S OSP-B200 Satellite System
For connecting the R&S OSP-B200 satellite system, the following series of accessories is available to cover all applications:
Modell No. Description Description Comment
1528.3170.02 OSP-Z200A LAN-type link cable between satellite and RC module, with 15-pin Sub-D connector, length 5 m
1528.3170.04 OSP-Z200B LAN-type link cable between satellite and RC module, with 15-pin Sub-D connector, length 5 m
1528.3186.02 OSP-Z201A Fibre-optic cable, both sides SC connector, length 5 m
1528.3186.04 OSP-Z201B Fibre-optic cable, both sides SC connector, length 10 m
1528.3186.06 OSP-Z201C Fibre-optic cable, both sides SC connector, length 20 m
1528.3192.02 OSP-Z202AF Fibre-optic cable, one side SC connector, one side FSMA connector, length 5 m
Used for feed-through via FSMA connector. Always two cables SC-FSMA are required.
1528.3192.04 OSP-Z202BF Fibre-optic cable, one side SC connector, one side FSMA connector, length 10 m
Used for feedthrough via FSMA connector. Always two SC-FSMA cables are required.
1528.3205.02 OSP-B200P Power supply for R&S OSP-B200S2, Var 04 (28 V DC, 3.75 A max.)
Use only with fiber-optic connection
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Functional Description Installing R&S OSP-200R in the R&S OSP Switch Unit
User Manual 1178.6733.02 - 01 11
3.5 Installing R&S OSP-200R in the R&S OSP Switch Unit
The option R&S OSP-B200R is a one-slot module that can be installed in each of the three R&S OSP base switch unit models; i.e. R&S OSP120, R&S OSP130 or R&S OSP150.
A maximum of three module busses is available in an R&S OSP base unit.
Figure 3-4: R&S OSP-B200R RC interface module installed in base switch unit
The R&S OSP-B200R is typically connected to two internal module busses, which are, per default, the module bus A11 and A12.
Therefore, only one additional module can be operated in the R&S OSP base unit.
When installing the R&S OSP-B200R into the R&S OSP base unit, you must only connect two interface cables to the R&S OSP mainboard.
For the overall satellite system, make the following connections:
● Base unit to integrated RC interface module ● RC interface module satellite unit ● Satellite unit to integrated relay module
These interface connections are shown in the the table and drawing below.
Satellite Channel
R&S OSP base unit to R&S OSP-B200R
R&S OSP-B200R to R&S OSP-B200S2
R&S OSP-B200S2 to relay module
A A11 (X2) /A12 (X4) or A13 (X13) to R&S OSP-B200R / X101
Default connection is A11 to X101
Use either a connection by Sub-D cable or a fiber-optic connection
R&S OSP-B200S2 / X101
B A11 (X2) /A12 (X4) or A13 (X13) to R&S OSP-B200R / X100
Default connection is A12 to X100
Use either a connection by Sub-D cable or a fiber-optic connection
R&S OSP-B200S2 / X100
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Functional Description Installing R&S OSP-200R in the R&S OSP Switch Unit
User Manual 1178.6733.02 - 01 12
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Functional Description Installing Modules in the Satellite Unit R&S OSP-B200S2
User Manual 1178.6733.02 - 01 13
Figure 3-5: Connections of the interfaces for the R&S OSP B200R/S satellite system
3.6 Installing Modules in the Satellite Unit R&S OSP-B200S2
If the satellite unit is ordered together with R&S OSP modules, the these modules are fitted and tested already in the factory.
For installing any module later on, proceed as follows.
1. Remove a blank panel (if available) from the front side of the satellite unit.
2. Find the flat ribbon cable in the open slot of the satellite unit. (In each slot, A and B, one flat ribbon cable is available.)
3. Connect the flat ribbon cable to the R&S OSP module’s connector.
4. Carefully insert the module into the slot
5. Fix the module with the six screws.
Figure 3-6: Satellite unit with slot B front panel removed
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Operating the R&S OSP Satellite System R&S OSP Satellite System with Wired Link
User Manual 1178.6733.02 - 01 14
4 Operating the R&S OSP Satellite System After installation of the option R&S OSP-200R in one of the R&S OSP base switch unit models R&S OSP120, R&S OSP130 or R&S OSP150, the connection to the satellite needs to be done either by Sub-D cable or by fiber-optic cable.
The R&S OSP-B200R/B200S satellite system only can be used in connection with standard R&S OSP modules fitted in the satellite unit.
4.1 R&S OSP Satellite System with Wired Link
For remote operation of the satellite unit across a distance of up to 10 m, use the cable R&S OSP-Z200A or R&S OSP-Z200B, as shown below:
Connect the “Wired Link” connector only to the R&S OSP-B200R remote control interface module. Connecting it to any other connector can harm your equipment.
In this configuration, the satellite unit R&S OSP-B200S is powered by the R&S OSP base unit via the cable R&S OSP-Z200A or R&S OSP-Z200B. The base unit can supply two R&S OSP modules, each with a maximum of 0.8 A (at 28 V DC).
Before powering up the R&S OSP base unit, first connect the remote control interface module R&S OSP-B200R to the satellite unit R&S OSP-B200S2.
Wired Link (with DC)
OSP-B200R
OSP-B200S
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Operating the R&S OSP Satellite System R&S OSP Satellite System with Fiber-Optic Link
User Manual 1178.6733.02 - 01 15
4.2 R&S OSP Satellite System with Fiber-Optic Link
For remote operation of the satellite unit at a longer distances or inside a shielded room, use the cable R&S OSP-Z201x or R&S OSP-Z202x, as shown below:
Before powering up the R&S OSP base unit, first connect the remote control interface module R&S OSP-B200R to the satellite unit R&S OSP-B200S2 and switch on the power supply OSP-B200P.
Operating the satellite unit R&S OSP-B200S in this configuration always requires the power supply R&S OSP-B200P.
4.3 Switching on the R&S OSP Satellite System
When the satellite system is correctly installed and connected, you can switch on the R&S OSP base unit. After booting up, the system status is shown by three LEDs. These LED’s are available both in the remote interface module R&S OSP-B200R and in the satellite unit R&S OSP-B200R2. The LEDs show the following status messages:
Device Power LED Link/Busy LED Overheat LED
Remote interface module R&S OSP-B200R
Green when power is ON
Continuously yellow when link between remote interface and satellite is established. Flashing yellow during data transfer.
--
Satellite unit R&S OSP-B200S2
Green when power is ON
Continuously yellow when link between remote interface and satellite is established. Flashing yellow during data transfer.
Orange when fan is switched on
Red if overheating occurs
FOL
OSP-B200R
OSP-B200S
AC 100V-200V
OSP-B200P
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 Operating the R&S OSP Satellite System Switching on the R&S OSP Satellite System
User Manual 1178.6733.02 - 01 16
In case of overheating, indicated by the satellite unit, the built-in modules are reset.
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 R&S OSP Satellite System Interface Connectors of the R&S OSP-B200R Module
User Manual 1178.6733.02 - 01 17
5 R&S OSP Satellite System Interface
5.1 Connectors of the R&S OSP-B200R Module
The following picture shows the layout of the R&S OSP-B200R interface connectors on the module’s interface panel.
Figure 5-1: R&S OSP-B200R module connectors
Connect the “Wired Link” connector only to the R&S OSP-B200R remote control interface module. Connecting it to any other connector can harm your equipment.
5.2 Connectors of the R&S OSP-B200S2 Satellite
The following picture shows the layout of the R&S OSP-B200S2 interface connectors on the satellite unit’s rear panel.
Figure 5-2: R&S OSP-B200S2 rear side connectors
1178673301_01_01_man_1_en__002-0016
R&S OSP-B200R/B200S2 R&S OSP Satellite System Interface Power Consumption
User Manual 1178.6733.02 - 01 18
Pin 1Pin 3
Pin 2
Pin 4
+ 28 VGND Figure 5-3: Pin assignment of the satellite unit’s power supply DC input
Connect the “Wired Link” connector only to the R&S OSP-B200R remote control interface module. Connecting it to any other connector can harm your equipment.
5.3 Power Consumption
Both the satellite system and the modules fitted within the satellite draw power from the R&S OSP base switch units (i.e. models R&S OSP120, R&S OSP130 or R&S OSP150). However, the additional power consumption required by the satellite system is relatively low:
● Max. 50 mA at 28 V ● Max. 250 mA at 3.3 V
For the power consumption data of the various modules, refer to the data sheet of the R&S OSP.
1178673301_01_01_man_1_en__002-0016