rps roller pinion...rps roller pinion once you have selected your rack/gear, finding the right...
TRANSCRIPT
RPS ROLLER PINIONOnce you have selected your rack/gear, finding the right pinion is easy. The following pages offer step-by-step selection instructions as well as pinion specifications and details on accessories.
Pinion Selection Process .......................... 22
Specifications .............................................. 22
Dimensional Drawings ........................ 23–26
Pinion Accessories
Adapters ............................................ 27
Preloaders .................................. 27–29PATENTED
Ro
ller Pin
ion
s
22
STEP 1: Determine your rack/gear size and find the same RPS pinion size. Always use the same size rack/gear and pinion. STEP 2: Select the material best suited for your application. (Other materials available upon request.)
Hard Chrome: alloy steel with a thin, dense chrome coatingNickel: alloy steel with nickel plating Stainless: stainless steel with or without a hard chrome coating
STEP 3: Select Mounting Style: For easy installation and maximum versatility, Nexen recommends using the flange-mounted version when practical.
Pinion Type
RPS Size
Number of
Rollers
Distance per Revolution
Pitch Circle Diameter Max
RPM *Product Number
Base Material/Coating Mount Style
Bore Size Mass Moment of
Inertiamm mm mm kg kgm2x10-4
PR
EM
IUM
PIN
ION
S
10 10 100 31.8 2400 966480 Hard Chrome Shaft Coupling 12 0.2 0.4
12 10 120 38.2 4000 966490 Hard Chrome Shaft Coupling 16 0.3 1.0
16 10 160 50.9 1500
966819 Nickel Shaft Coupling 16 0.7 3.9966650 Nickel Shaft Coupling 20 0.7 3.9966761 Stainless Shaft Coupling 20 0.7 3.9966687 Nickel Flange N/A 0.8 4.0966759 Stainless Flange N/A 0.8 4.0
20 10 200 63.7 1500
966820 Nickel Shaft Coupling 22 1.4 10.6966660 Nickel Shaft Coupling 25 1.3 10.5966771 Stainless Shaft Coupling 25 1.3 10.5966675 Nickel Flange N/A 1.2 10.2Request Stainless Flange N/A 1.2 10.2
25 10 250 79.6 1820
966670 Nickel Shaft Coupling 30 2.1 25.5966758 Stainless Shaft Coupling 30 2.1 25.2966673 Nickel Flange N/A 2.1 25.2Request Stainless Flange N/A 2.1 25.2
32 12 384 122.2 1719
966821 Nickel Shaft Coupling 32 7.3 173.0966822 Nickel Shaft Coupling 40 6.8 171.0966680 Nickel Shaft Coupling 45 6.4 169.0Request Stainless Shaft Coupling 45 6.4 169.0966677 Nickel Flange N/A 6.6 168.0Request Stainless Flange N/A 6.6 168.0
40 12 480 152.8 750
966823 Nickel Shaft Coupling 55 12.9 598.0966690 Nickel Shaft Coupling 60 12.4 594.0Request Stainless Shaft Coupling 60 12.4 594.0966697 Nickel Flange N/A 15.5 665.0Request Stainless Flange N/A 15.5 665.0
4014 14 560 178.3 643
966824 Nickel Shaft Coupling 55 21.4 1184.0966693 Nickel Shaft Coupling 60 20.9 1180.0
Request Stainless Shaft Coupling 60 20.9 1180.0966700 Nickel Flange N/A 23.5 1306.0Request Stainless Flange N/A 23.5 1306.0
VALU
E
PIN
ION
S 16 10 160 50.9 750 966826 Aluminum Shaft & Keyway 16 0.4 2.4
20 10 200 63.7 600 966827 Aluminum Shaft & Keyway 16 0.7 6.0
25 10 250 79.6 480 966828 Aluminum Shaft & Keyway 22 1.1 14.7
Shaft Mount• Shaft Coupling or Shaft & Keyway mounting option• Coupling option uses a keyless mechanical compression coupling to secure to shaft• Available in multiple bore diameters. Contact Nexen.
Flange Mount• Conforms to ISO 9409 specifications • Nexen adapter preloader options available with this version
RPS Pinion Selection Process
See the Definitions section for more information on these attributes.
Pin
ion
Sel
ectio
n
* The maximum rated speed of a RPS system is equal to the lowest rating of either the pinion or the rack.
23
Pinion Dimensions
RPS10 Premium Pinion RPS12 Premium Pinion
5.7 11.7
58.041.02x
28.0
29.0Minimum
ShaftInsertion
36.5
17.0
10.52x
ReferenceSurface
Shaft Mounted Pinion
B
See Table
5.7
64.5
31.0Minimum
ShaftInsertion
39.5
15.5
11.52x
12.7
49.02x
34.0
ReferenceSurface
Shaft Mounted Pinion
B
See Table
AdditionAl dimensions
The Pinion dimensions listed here are for selection purposes only. For detailed drawings and CAD models, please visit www.nexengroup.com.
Pinion AdAPters
Pinion adapters allow the pinion to mount to one frame-size larger of a reducer. Moving up a reducer size is sometimes needed due to reducer availability or motor sizing reasons. All Nexen pinion adapters are made from corrosion resistant materials or coatings. For your convenience, we have included pinion adapter dimensions next to each ISO9409 flange mounted pinion. See Table 6 for pinion adapter part numbers.
Common Attributes for All Pinions
Estimated Life See System Life section.
Operating Temperature Range °C -5 to 40
Lubrication/Tooth Grease Part Number 853901
Pinion D
imensions
24
Pinion Dimensions
RPS20 Premium Pinion
MinimumShaftInsertion
106.022.0
13.5
ø84.02x
ø50.0
ø16.0Thru
ø31.50
Pilotø19.995
M5-08 at 45°Nexen Supplied1
3.5 Pilot Length
12.02x
7.0Screw Length
ø84.02x
106.0
22.0
13.5
0.5Bolt HeadProtrusion
Pilotø31.495
ø20.0Thru
ø50.0
M6-1.00 7 ScrewsSupplied
10.0
ø65.0
PilotLength5.5
9.5Screw Length
45° Typ
ReferenceSurface
Reference Surface
-B-1(8 Screws for Adapter Mount)(7 Screws for Direct Mount)
-B-
See Table
12.0 (2x)
ISO 9409 Flange Mount PinionShaft Mounted Pinion
Required For Some Gearhead SizesPinion Adapter
32.0
15.515.5
42.5
42.5
~58.5
RPS16 Premium Pinion
RPS16 Value Pinion
ø672x
15.2 14.511.5
Reference Surface -B-
2x
42.012.9
81.5
See Table
Shaft & Keyway Pinion
28.0MinimumShaft Insertion
PilotLength3.5
5.2Screw Length
7.00
45°Typ
22.5°
ø12.0Thru
Pilotø19.995ø20.00
Pilotø11.995
ø9.0Thru
13.5 14.5
82.0
12.02x
PilotLength3.5
12.0 (2x)
ø67.02X
ScrewLength6.5 (M4)
Minimum Shaft Insertion
ø42.0
ø67.02X
13.5
14.5
82.0
(8) M4 x 0.7 Screws (Shown)included for ISO Adapter (966688)*
ø48.0
ø31.50M5-0.8
7 ScrewsSupplied
ReferenceSurface
Reference Surface
*(4) M3 x 0.5 x 45 mm screws (Not Shown) included for use with APEX AD047
See Table
-B- -B-
ISO 9409 Flange Mount PinionShaft Mounted Pinion
Required For Some Gearhead SizesPinion Adapter
11.5
38.5 38.5
27.5
11.5
~52.5
Pin
ion
Dim
ensi
ons
Note: See product drawing for keyway specifications.
25
Pinion Dimensions
RPS20 Value Pinion
RPS25 Premium Pinion
RPS25 Value Pinion
5.5Pilot
Length
11.00
22.5°
22.5°
22.5°
22.5°
ø31.5Thru
ø63.0
Pilotø39.995
45°
45°
9.8Screw Length
ø100.0
22.5°
45°
45°
M6-1.00 11 Screws Supplied
8.9Screw Length
ø101.02x
126.0
7.6PilotLength5.5
16.0
Pilotø31.500
ø50.0
ø23.5Thru
M6-1.006 Custom Screws @ 45° Supplied
Minimum Shaft Insertion
126.0
16.0
ø101.02x
ø63.0
24.5
14.02x
24.5ReferenceSurface
ReferenceSurface
14.0 (2x)
22.5°See Table
ISO 9409 Flange Mount PinionShaft Mounted Pinion
Required For Some Gearhead SizesPinion Adapter
-B--B-
49.5
18.5 18.5
37.5
67.549.5
-B-Reference Surface
53.015.52x
1012x
24.5
125.5
18.517.3
ø
See Table
Shaft & Keyway Pinion
36.0MinimumShaft Insertion
ø
106.0
842x
22.0
13.52x
46.0
15.1 15.9
Reference Surface -B-
See Table
Shaft & Keyway Pinion
28.0MinimumShaft Insertion
Pinion D
imensions
Note: See product drawing for keyway specifications.
Note: See product drawing for keyway specifications.
26
Pinion Dimensions
RPS32 Premium Pinion
28.0
45°
ø32.0Thru
ø63.0
M6-1.010 ScrewsSupplied
Pilotø39.995
176.0
20.02x
24.5
5.5
22.0
8.3
ø148.02X
68.5
ø148.02x
24.5 22.0
176.0
88.568.5 Minimum
ShaftInsertion
45°
22.5°4x
20.0 (2x)
28.0
M8-1.258 ScrewsSupplied
51.0
See Table Pilot
Length5.5
10.018.75°22.5°
ø80.0
45°
11.8Screw Length
ø98.0
ø40.00Thru
ScrewLength
PilotLength
Pilotø49.995
ISO 9409 Flange Mount PinionShaft Mounted Pinion
Required For Some Gearhead SizesPinion Adapter
ReferenceSurface
-B- ReferenceSurface
-B-
RPS4014 Premium Pinion
247.0
11.6
116.0
35.0
PilotLength7.5
214.02x
17.4ScrewLength
ø105.0
Pilotø79.995
ø60.0Thru
M10-1.50 6 For ISO-940912 For Adapter
12 Screws Supplied
30°Typ
120°
12.5° 30°Typ 30°Typ
ø125.0
247.0
116.0
ø214.02x
48°
48°
45°
27°
24°3X
ø80.0Thru
ø89.995Pilot
ø140.0
M16-2.08 ScrewsSupplied
24°
ø180.0
22.022.8
ScrewLength
Pilot Length 11.5
33.0
42.0
35.0 2x
33.0
37.042.0
37.0
MinimumShaftInsertion82.0
See Table
ISO 9409 Flange Mount PinionShaft Mounted Pinion
Required For Some Gearhead SizesPinion Adapter
ReferenceSurface
-B- ReferenceSurface
-B-
RPS40 Premium Pinion
32.5
34.0
224.0
96.588.0 Minimum
ShaftInsertion
ø190.02x
31.5
Pilotø49.995
ø80.0
ø40.0Thru
30°Typ
15°
M8-1.2511 Screws(Supplied)
ø190.02X
30.02x
96.5
10.0ScrewLength
31.5
224.0
5.5
32.5M10 1.5
11 Screwsat 30°
Supplied
ø50.0Thru
ø125.0
18.0 30°Typ 15°
Pilotø79.995
7.5PilotLength
ø160.0
14.8ScrewLength
34.0
PilotLength
30.02x
See Table
ISO 9409 Flange Mount PinionShaft Mounted Pinion
Required For Some Gearhead SizesPinion Adapter
ReferenceSurface
-B- ReferenceSurface
-B-
Pin
ion
Dim
ensi
ons
27
Pinion Preloader
Pair Nexen’s Flange-Mount Pinion with our RPS Pinion Preloader for easy integration into your machine design. Preloaders feature an adjuster that allows the pinion to be moved up or down into the rack while keeping the pinion properly oriented to the rack. The pilot in the adjuster plate accommodates common servo gearhead sizes from your favorite servo gearhead manufacturer.
Preloader and Adapter components are either made from corrosion-resistant stainless steel, nickel, or zinc plating.
Gearhead with ISO 9409 Output
Preloader
ISO 9409 Roller Pinion
Customer Machine Frame
Pinion SizeAdapter w/ Pinion(not required in some
applications)
Pinion Preloader
Customer Provided Gearhead
Alpha/Wittenstein APEX Mijno Neugart SEW-Euro Sumitomo Stöber
RPS16 N/A N/A N/A AD047 N/A N/A N/A N/A N/A
RPS20 RPS16 & 966688 960851 TP004 AD064 BDB 085 PLFE/N 64 PSBF221/2 N/APH/A/KX
321/2
RPS25 RPS20 & 966676 960850 TP010 AD090 BDB 120 PLFE/N 90 PSBF321/2 PNFX080PH/A/KX
421/2
RPS32 RPS25 & 966674 960852 TP025 AD110 BDB 145 PLFE/N 110 PSBF521/2 PNFX250PH/A/KX
521/2
RPS40 RPS32 & 966668 960853 TP050 AD140 BDB 180 PLFN 40 PSBF621/2 PNFX450PH/A/KX
721/2
RPS4014 RPS40 & 966698 960854 TP110 AD200 BDB 250 PLFN 200 PSBF721/2 N/APH/A/KX
821/2
N/A RPS4014 & 966701 N/A TP300 AD255 BDB 300 N/A N/A N/APH/A/KX 912/23
ISO 9409 Adapter (If Required)
This is a partial list. Other gearheads may apply.
If directly mounting the pinion to the reducer:Disregard the Adapter column and select the preloader and gearhead for your RPS Pinion size.
If going up a reducer frame size:Start in the Adapter column and select the compatible pinion, adapter, preloader and gearhead.
Table 6 Gearhead Compatibility Table
FEATURES:
• High-Precision Ground Surfaces
• Allows Perpendicular Movement
• Corrosion Resistant Materials
SELECTING PINION ADAPTERS AND PRELOADERS
Pinion A
dapter &
Preloader
28
Preloader Dimensions
RPS-PRE-ISO-090-3 Product Number 960850
RPS-PRE-ISO-064-3 Product Number 960851
M4 - 0.7 X 16.0 2 Screws Supplied
M6 - 1.00 (4X) Shoulder Cap Screw
(Supplied w/ Washers)
35.0
8.0
R8.04x
ø79.0
ø64.0
100.0
50.0M4-0.7 x 10.0
8 Screws Supplied
Min - Max114.7 -124.3ø107.05
105.0
47.5
45°Typ
Hex 3.0 mm Wrench
Customer-SuppliedMounting SurfaceSee View to Right
Gearhead &Pinion Shownfor Reference(Not Included)
MountingSurface
10.0Max
67.46
25.0
12.5
40.080.0
36.02x
ø88.0
M6-1.00 THRUø8.013, 4.00 Deep
4 Holes Located as Shown
36.02x
M4-0.70, 9.0 mm 2 Holes Located
as Shown
8.502x
4.25
Customer Mounting Surface DetailsPreloader Details
1.6
.03
Min - Max149.7 - 159.4
12.7
M5 - 0.8 X 16.08 Screws Supplied
M8 - 1.25 (4X) Shoulder Cap Screw Supplied w/ Washers
50.0
Customer-SuppliedMounting SurfaceSee View to Right
Mounting Surface
M6 - 1.0 X 20.0 2 Screws Supplied
ø109.0
ø90.0
R8.04x
62.5
125.0
61.0
135.0
ø142.86
Hex 8 mm Wrench[5/16]
6.00
12.02x
17.0Max
30.0
15.0
ø110.0
52.5105.0
M8-1.25 THRUø10.013, 4.00 Deep
4 Holes Located as Shown
48.5 (2x)
48.5 (2x)87.15
M6-1.0, 8.0 Deep 2 Holes Located
As Shown
Customer Mounting Surface DetailsPreloader Details
1.6.03
Gearhead &Pinion Shownfor Reference(Not Included)
RPS-PRE-ISO-110-3 Product Number 960852
Min - Max194.1 -204.0
12.7
M6 - 1.0 X 20.02 Screws Supplied
M8 - 1.25 (6X)Shoulder Cap Screw Supplied w/ Washers
80.0160.0
22.5° Typ
180.0
90.0
Hex 8 mm Wrench 50.0
M5 - 0.8 X 16.016 ScrewsSupplied
ø135.0
ø110.0
R8.04x
Customer-SuppliedMounting SurfaceSee View to Right
MountingSurface
6.0
12.02x
16.0Max
30.015.0
M6-1.0, 8.0 Deep 2 Holes Located As Shown M8-1.25 THRU
ø10.013, 4.00 Deep6 Holes Located as Shown
ø152.0
71.5
48.5
28.0 31.0
109.070.0
140.0
71.5
102.6576.5
48.5
Customer Mounting Surface DetailsPreloader Details
Gearhead &Pinion Shownfor Reference(Not Included)
1.6.03
Pin
ion
Pre
load
er
29
Preloader Dimensions
RPS-PRE-ISO-140-3 Product Number 960853
12.7
Min - Max239.6 - 249.5
M8 - 1.25 (8X) Shoulder Cap Screw
Supplied With Washers
M6 - 1.0 X 20.02 Screws Supplied
Hex 8 mm Wrench50.0
M6 - 1.0 X 20.024 Screws
Supplied
MountingSurface
ø168.0
ø140.0
R12.04x
92.5
185.0
15°Typ
112.5
225.0
6.0
12.02x 22.0
Max30.0
15.0
ø193.0
M6-1.0, 10.0 Deep2 Holes Located As Shown
M8-1.25 THRUø10.013, 4.00 Deep
8 Holes Located as Shown
42.5
122.5165.0
125.6599.02x
99.02x
67.52x
67.52x
Customer-SuppliedMounting SurfaceSee View to Right
Customer Mounting Surface DetailsPreloader Details
Gearhead &Pinion Shownfor Reference(Not Included)
1.6.03
82.5
RPS-PRE-ISO-200-3 Product Number 960854
M6 - 1.0 X 20.0 2 Screws SuppliedHex 8 mm Wrench
50.0
M8 - 1.25 X 20.0 24 Screws
Supplied
Customer-SuppliedMounting SurfaceSee View to Right
MountingSurface
ø200.0
ø233.0
R12.04x 125.0
250.0
15°Typ
280.0
140.0
7.014.0
34.0Max 30.0
15.0
M6-1.0, 10.0 Deep 2 Holes Located As Shown M10-1.50 THRU
ø12.013, 4.13 Deep8 Holes Located as Shown
43.0108.0
216.0173.0
152.65 123.5 2x87.5 2x
M10 - 1.5 Shoulder Cap Screws 8 Supplied w/ Washers
123.52x
87.5 2xø225.0
Min - Max294.1 - 304.0
12.7
Customer Mounting Surface DetailsPreloader Details
Gearhead &Pinion Shownfor Reference(Not Included)
1.6.03
Pinion P
reloader
Appendix: Definitions & Notes
ARCSECONDArcSecond is a unit of angular measurement equal to 1/3600 of a degree.
BACKLASHThe innovative design of the RPS tooth allows for a zero-backlash drive system. Because zero backlash is impossible to measure, industry standard maintains that anything under 3.2 microns is considered zero.
CORROSION RESISTANCENexen makes no corrosion resistance claims for specific applications but does offer various corrosion countermeasures that include stainless steel and various surface treatments or coatings. Nexen will convey all material and coating specifications, but it is up to the customer to determine application suitability based on this information and/or thorough sample testing.
EFFICIENCYThe RPS system uses needle bearings to support the rollers that engage the teeth. This eliminates the sliding friction found in many other motion control systems and gives it an efficiency greater than 99%. This high efficiency means little is lost to friction, heat, and wear, providing a long life of 60,000,000 pinion revolutions (up to 36 million meters of travel).
LIFE RATING
Pinions: Pinion life is based on L10 of the bearing components. Just like any bearing, environmental conditions will affect life. The product rating is assuming a clean environment with normal manufacturing facility temperatures.
Pinion performance tends to be constant over its life with a rapid deterioration at the end of life as the needle bearings supporting the rollers fail.
Racks & Gears: The rack and gears have their own specific life ratings depending on model, and in some cases RPS size, and is based on tooth contacts at allowed loads and speeds. The combined pinion and rack or gear that makes up a given RPS or RPG system will have the combined life of the lower-rated component and will be greatly effected by machine design, RPS or RPG installation, operating patterns, and receiving recommended lubrication intervals while operated in a clean, dry, 20° C environment.
Rack wear is relatively linear over its life. Application and environmental conditions and lubrication intervals will impact expected product life. Depending on the length of the rack or diameter of the gear and usage patterns, it is often possible to replace the pinion several times, restoring full system performance before the rack or gear would need replacement if the pinion is replaced before reaching the point where its failure starts damaging rack or gear teeth.
LUBRICATION FREE OPERATIONIn some cases the RPS rack can be operated without lubrication on the rack teeth or pinion rollers. This is dependent on the specific rack model and the maximum speed being less than 30 m/min. The no-lubrication option generally applies to rack that has received a surface treatment and does not apply to bare steel models of rack or any gearing. See specifications for the specific rack model you are considering to know if this is possible.
Operating without tooth/roller lubrication will reduce tooth life but can be beneficial in food, pharmaceutical, clean room, and other applications where the grease could contaminate the environment, or applications with high levels environmental contaminates that would be attracted to the grease and accelerate the wear rate. Nexen can not calculate a life rating when running without lubrication due to the number of variables that impact life, but based on past experience, the reduction has been modest and far exceeds other mechanical drive alternatives.
App
endi
x
Appendix: Definitions & Notes
MASS VS. WEIGHTMass is the quantity of matter contained in an object, while weight is the force by which the object is pulled to the earth due to gravity. Therefore, in this literature, mass is shown in kilograms (kg) and weight is shown in kilograms force (kgf).
NOISE RATINGThe RPS system is nearly silent at low speeds and typically less than 75 dB at full speed. This is dependent on machine design, proper RPS installation, whether lubrication is used or not, and is difficult to isolate from other drive train and guiding system noise, so your results may vary.
OPERATING TEMPERATURE RANGEThis is the range that the RPS system will function in. Accuracy specifications are based on 20° C and thermal expansion/contraction will effect the accuracy of the RPS system. It is recommended the RPS system be installed at the highest temperature the system will be operated at and avoid wide temperature swings for maximum accuracy and performance. For applications outside of this temperature range, or with wide temperature swings, contact Nexen for more information.
POSITIONAL ACCURACYThis is dependent on proper machine design and RPS product installation. Positional accuracy is measured at 20° C and subject to variations due to mounting surface irregularities, rigidity, installation accuracy, proper maintenance, and ambient temperature. To be conservative, the RPS rack transmitting accuracy has been rounded up to the next ±10 μm. Other rack positional accuracy specifications have been rounded up to the next ±5 μm. For RPG gearsets, the angular accuracy rating is increased (less accurate) by 5% and then rounded to the next whole number, except in the case of very large gears where rounding may be fractional. This allows customers to achieve Nexen accuracy ratings with reasonable effort. Higher performance can be obtained if machine design and tolerances are optimized.
SERIES DIFFERENTIATIONThe RPS and RPG pinions, racks and gears have been made in different series (thicknesses) depending on the specific product and should not be mixed when matching a pinion to a given rack or gear. All current pinions, racks and gears are B-series. Series A pinions (discontinued) are interchangeable with C-series pinions (discontinued) and have a wider body with longer rollers than the B-series pinions. The current rack and gear products only use B-series pinions, and the previous gears could use either depending on the RPG size. B-series pinions will not physically fit on a C-series gear, and a C-series pinion would be compromised if used on a B-series rack or gear due to a higher bending moment on the rollers, which would reduce their lives.
SHOCK FACTORShock Factor is a value given to represent the smoothness of operation. Accommodating for Shock Factor when calculating system requirements ensures more accurate product selection.
Appendix
68
ISO 9001 Certified
Nexen has sales offices throughout the United States, Europe, Japan, and Australia.
www.nexengroup.com
In accordance with Nexen’s established policy of constant product improvement, the specifications contained in this document are subject to change without notice. Technical data listed in this document are based on the latest information available at the time of printing and are also subject to change without notice. For current information, please consult www.nexengroup.com or contact Nexen’s Technical Support Group at the location to the right.
Nexen Group, Inc.560 Oak Grove ParkwayVadnais Heights, MN 55127
(800) 843-7445Fax: (651) 286-1099www.nexengroup.com
©2014 Nexen Group, Inc. FORM NO. L-21282-E-1014
CUTTING SYSTEMS
GANTRY SYSTEMS
MEDICAL PRODUCTS
ROBOTICS
AEROSPACE
MACHINE TOOL
SEMICONDUCTOR
MATERIAL HANDLING
INDUSTRIES & APPLICATIONS