rourkela smart city limited - rmc.nic.inrmc.nic.in/documents/tender notice for installation... ·...
TRANSCRIPT
1
Rourkela Smart City Limited Udit Nagar, Rourkela – 769012
No. 146 / Dt 24.04.18
Tender Notice
Rourkela Smart City Ltd. intends to install modular furniture
(work stations/chairs/partition walls/conference table etc) at 1st & 2nd floor of e-
library building of Rourkela Municipal Corporation at Uditnagar, Rourkela. Sealed
offer along with details of the furnitures are invited from reputed interior
decorators authorised by OEM /modular furniture manufactures with 3 years of
experience in similar works and average annual turnovers of previous three
financial years taken together not to be less than Rs.1 Crore.
The bid must be accompanied by Tender document cost @ Rs 1000/- plus
12% GST and EMD @ Rs 15,000/-(Rupees Fifteen Thousand Only) in shape of
DD drawn from a scheduled bank in favour of Rourkela Smart City Ltd., payable
at Rourkela.
The detail specification, drawings, conditions can be downloaded from RMC
website www.rmc.nic.in.
The bid should be addressed to the Chief Executive, Rourkela Smart City
Ltd., Udit Nagar, Rourkela -769012. Last date of submission of bid documents is
dt.10.05.2018 (up to 5.00 P.M ) & the same shall be opened on dt. 11.05.2018 at
11.00 A.M.
The authority reserves the rights to reject any or all bids without assigning
any reason thereof.
Chief Executive Officer
Rourkela Smart City Limited
2
Terms & Conditions
1. Site Inspection:
The bidder must inspect the site & get themselves acquainted with the site. They are also
requested to get the detail dimension of the rooms before quoting the rates. Any claim in
plea of site conditions shall not be allowed later.
2. Two bid system:
a. Technical bid (Eligibility Criteria)
i. The bidder must be a reputed interior decorator authorised by OEM / modular furniture
manufactures with 3 years of experience in similar works.
ii. The average annual turnover of previous three financial years taken together should
not to be less than Rs.1 (one) Crore.
iii. The bidder must have successfully completed one similar works in any Govt.
organisation/Urban local bodies of minimum work order value of Rs.20 (Twenty) lakhs.
iv. The furniture/product to be quoted by the agency must match the technical
specifications mentioned in the Tender document. The agency should submit the details
of dimension of the product/furniture quoted along with the make & model in a separate
sheet as per the drawings and technical specification mentioned in the Tender document
along with the Technical bid.
v. The bidder must not be blacklisted or debarred in the past by Union / State Government/
Urban Local Bodies(ULBs)/PSUs from taking part in Government tenders in India..
Note- The bidder should submit copies of PAN, Balance sheet for last three financial
years duly certified by a Charted Accountant, IT return for last three financial years, GST
Registration, Copy of OEM authorisation if any, Printed brochures of required products,
Work order and proof of successfully completion of similar works, Correspondence
Address details with e-mail id & contact number, Tender document cost (non refundable)
@ Rs 1000/- plus GST @12% & EMD @ Rs 15,000/- (Rupees Fifteen Thousand Only) in
shape of DD drawn from a schedule bank in favour of Rourkela Smart City Ltd payable at
Rourkela,
In absence of the above necessary supporting documents the bid shall not be considered.
b. Financial Bid
The bidders who will qualify in the Technical bid evaluation will be considered for opening
of Financial bid. The date of opening of financial bid will be intimated to the bidder by
e-mail/contact number mentioned in the Tender document. The financial bid should
contain the detail of the furnitures/products to be installed as per the BOQ & duly filled in
with quoted price (Rs.) for all the items. The bidder for which the total quoted price by
taking in to consideration of all the items as per the BOQ becomes lowest will be declared
as the successful bidder.
The Tender document should be duly signed, sealed & submitted in a sealed envelope
addressed to the Chief Executive Officer, Rourkela Smart City Ltd., Udit Nagar, Rourkela –
769012 by speed post/Regd. Post/courier on or before dt. 21.04.2018 ( 5.00 pm).
3. Project to be taken on turnkey basis:
3
The successful bidder shall execute the work on turnkey basis i.e interior decoration,
electrical and all other ancillary works.
4. Time for completion:
The work should be completed in all respect within 30 (thirty) days. If the project is
delayed due to reason attributed to the agency, penalty @ 0.5 % per day of the total
agreement value upto maximum 5% of the total agreement value shall be levied after
which the authority has reserves the right to cancel the agreement without any prior notice
and get the remaining work done through other agency.
5. Scope of work:
This is a turnkey project completing all the interior decoration work as per the enclosed
drawings which mainly includes -
a) Providing workstation with suitable partition
b) Reception desk & Sofa at waiting hall
c) Mini conference facility at vendor meeting room & other meeting room
d) Infrastructural work for a pantry
e) Conference table & chair
f) Partition work for cubicle & cabins
g) Furniture for cubicle & cabin
h) Ancillary minor electrical works if any
6. Prefab or Fabrication at site:
The agency is at liberty to install prefab structures or fabricate at site or a combination of
both.
7. Suggestion of alternate materials:
The agency is at liberty to suggest & execute with alternate material with due approval
from CEO,Rourkela Smart City Ltd. Also in order to suit the size of room & overall
aesthetic the agency may propose for change in size & specifications of furniture, which
shall be executed after due approval of the authority. In case of major deviation, rate shall
be decided with mutual consent.
8. Manufacturer’s guarantee:
The agency must provide 1 year manufacture guarantee against all kinds of defects.
09. Performance Bank Guarantee(PBG)
The successful agency must submit the Performance Bank Guarantee @10% of the Total
Tender cost from a scheduled Bank operable at Rourkela before start of the work. The
EMD will be returned to the successful agency after submission of the PBG. The PBG will
be returned to the agency after 60 days of the completion of all the works.
10. Payment: 90% payment shall be released after successful completion of the work & balance 10% shall be released after 1 year of successful completion of the works and all the contractual obligations. 11. Jurisdiction: Litigation arising out of the agreement shall be subject to the jurisdiction of High Court in the state of Odisha.
4
Appendix A
Format for Technical Bid (on letter head)
(All the documents must be self-attested)
Sl. No Descriptions Information to be filled by the
tenderer ( if required separate
sheets may be enclosed)
1 Name, Address, Mobile No & E mail ID of
Tenderer with complete contact details
2 Type of Organization (Whether
proprietorship, partnership, private
limited, limited company, Original
Equipment Manufacturer (OEM) )
Registration certificate to be
enclosed
3 Name and Address of the Organisation
with e-mail ID & Contact umber
4 Year of formation of the company &
at-least 3 (three) years of experience in
similar works.
Copy enclosed : Y / N
5 The bidder must have successfully
completed one similar works in any Govt.
organisation/Urban local bodies of
minimum work order value of Rs.20
(Twenty) lakhs.
Copy enclosed : Y / N
6 Income Tax return for the last three
financial years (attach copies)
Year wise Copy enclosed : Y / N
7 The average annual turnover of
previous three financial years taken
together should not to be less than Rs.1
(one) Crore. Audited financial
statements, duly certified by Charted
Accountant (CA) for the last three years,
shall be enclosed.
Year wise Copy enclosed : Y / N
8 The agency should submit the details of dimension of the product/furniture quoted along with the make & model in a separate sheet as per the drawings and technical specification mentioned in the Tender document & Printed brochures of
Copy enclosed : Y / N
5
required products along with the Technical bid.
9 GST Number/ Certificate No Copy enclosed : Y / N
10 PAN Number No Copy enclosed : Y / N
11 Details of Tender Document Fee
DD No & Date
DD enclosed : Y / N
12 Details of Earnest Money
DD No & Date
DD enclosed : Y / N
13 List of clients - including Govt.
Organizations / PSU/ULBs - Name of
Client with Contact Details, Category /
Nature of works completed
Copy enclosed : Y / N
14 Copy of OEM authorisation if any, Copy enclosed : Y / N
15 An affidavit on Non-Judicial Stamp paper
of Rs 10/- duly notarized saying the
tenderer has not been debarred and / or
blacklisted by any Central Government
and / or any State Government
Department(s) and / or any PSU/ULBs.
Copy enclosed : Y / N
16 Any other information
Undertaking
(a) I hereby certify that all the information furnished above are true to the best of my knowledge. I
have no objection to RSCL verifying any or all the information furnished in this document with the
concerned authorities, if necessary.
(b) I also certify that, I have understood the complete scope of work, all terms and conditions
indicated in the tender document and completely accept all of them.
Seal & Signature of the Authorised Signatory
Date -
6
Appendix B
DECLARATION REGARDING BLACKLISTING / DEBARRING FOR TAKING PART IN
TENDER (To be executed & attested by Public Notary / Executive Magistrate on Rs10/- non-
judicial Stamp paper by the Tenderer)
1. I/ We ________________________ (Tenderer) hereby declare that the Tenderer namely
M/s.__________________________________________________ has not been
blacklisted or debarred in the past by Union / State Government or any Organization from
taking part in Government tenders in India..
2. In case the above information found false, I / we are fully aware that the tender / contract
will be rejected/cancelled by RSCL and EMD & Performance Security shall be forfeited.
3. In addition to the above RSCL will not be responsible to pay the bills for any completed /
partially completed work.
DEPONENT
Attested: Name & Address -
(Public Notary / Executive Magistrate)
7
Appendix C
Interior work of 1st & 2nd floor of e-Library building
PROFORMA FOR FINANCIAL BID (on letter head)
Ref No. …………………… Date …………………………
S.No. Item Unit Qty Unit Rate (Rs.)
Amount (Rs.)
1 Work station(as per drawing,specification & as approved by E.I.C)
Nos. 51
2 Partition (as per drawing specification) Doors shall be deemed to be part of the partition & shall be paid at the same rate
Sft. 600
3 Conference Table(as per drawing & specification)
A.Conference hall No. 1
B.Mini Conference No. 1
4 Reception Table No. 1
5 Reception sofa No. 2
6 Storage unit No. 6
7 CEO’s Table No. 1
8 Executive Table No. 3
9 CEO’s Chair No. 1
10 Executive Chair No. 3
11 Workstation Chair No. 62
12 Conference chairs(including visitors chair in executives chambers)
No. 34
13 Pantry platform No. 1
Grand Total (in words) -
N.B: The rates for all the items are to be quoted including GST. The authority reserves
the right to change the quantity of different items or delete any item.
Seal & Signature of the Authorised Signatory
Date –
8
TECHNICAL SPECIFICATIONS FOR THE PROPOSED OFFICE FITOUT FOR RSCL
The products should be selected from BIFMA and FSC certified company and complete as per
approved sample and specification under the guidance of Engineer in charge. The work should be
finished as per the best practices standard and making the fitout complete in all respect for
intended purpose of use.
1.0 Specification for Workstations
(a) Modular furniture work stations, 1500mm x 1500mm having arrangement as single-seater,
two-seater or four-seater including free standing 1200mm (+ upto 75mm) high tile based
partition.
(b) Storage pedestal drawer.
(c) Chairs for workstations.
(d) Adjustable wheel mounted CPU trolley
1.1 Frame
(a) The partition panels shall be tile based/ panel based with anodised finish & shall have overall
minimum thickness of 60-65 mm.
(b) Partition inner frame is 1.2-1.5mm thick mild steel. Horizontal and vertical trims are made out
of extruded aluminum of 1.2-1.5mm thick. All Panels/trims shall be powder coated with 50
micron. Aluminum trims are elegantly fixed with hidden connectors on the partition.
(c) These vertical channels shall have suitable and sturdy arrangement to accept tile cladding.
(d) All exposed vertical edges of partition panels shall be finished with contoured edged powder
coated Aluminum section of minimum 1mm thickness as per grade He-9-63400 as per IS:
733-1983 (or Latest if any).
(e) Connectors shall be of die cast aluminum with a waterfall edge for a continuous transition
from horizontal to vertical trim.
(f) Raceway consisting of powder coated section minimum 1 mm thick of CRCA MS grade ‘D’ as
per IS: 513-1994 of approved shade shall be provided of minimum 100mm size at two levels
(g) Panel should have cutouts of required sizes for installing electrical switch boards (as per
switch samples provided).
(h) There shall be separate slots for passage of data and electrical wires.
(i) The frames should be designed to easily handle upto 70 Nos CAT 6 wires at entry points.
(j) Tiles shall be offered for options as per attached drawing, i.e. Fabric tile (tackable/ Acoustic /
Pinup Tile) and Laminate Tile/ GlassTile/white board.
(k) End cap, Inline Cap, Universal Caps shall be of Aluminium extrusions.
9
(l) Top & Vertical trim shall be made up of Aluminium extrusions.
(m) 2 way / 3 way post shall be made up of minimum 1mm CRCA material.
(n) Connectors – 2 way / 3 way / 4 way, shall be of Aluminum Die Cast.
1.2 Tile Construction
(a) The frame work shall be fitted with 8mm thick pre laminated Particle tiles of approved shade.
Partition shall have provision for pin up board with fire-retardant fabric/ white marker/
laminated of approved shade. Fabric Tiles base shall be made of minimum 4mm thick MDF
(Medium density fibre) Material or particle board of minimum 9mm thick, fabric of approved
shade and of fire retardant quality.
(b) Laminate tiles shall be minimum 4mm thick MDF Material base or particle board of minimum
9mm thick base with lamination of approved colour.
(c) Glass Tiles (lacquered) shall be minimum 4mm thick toughened fitted in powder coated
Aluminum Alloy frame (He-9-63400) along with provision of corner/ top/ bottom clips made of
nylon 66. The end partition to have transparent glass tile
(d) Provision of accessories for name-plate & magnetic clips to be included in the design
(e) It should be of desired shade as approved by RSCL authorities
1.3 Work surface
(a) Standard table top height – 740mm (including table top thickness of 25mm)
(b) Work surface shall be 1500mm x 1500mm made up of 25mm thick laminated plain particle
board interior grade conforming to IS: 3087-1985 (or Latest if any) with PVC lipping/edge
binding 2mm thick.
(c) The top shall be factory-made, pre-laminated with laminate of 1mm thickness of approved
shade as per IS : 2046-1995.
(d) Bottom shall have a backing laminate of minimum 0.6mm thickness.
(e) The front edge of work surface shall be provided with machine pressed 2mm thick PVC
lipping/ edge binding. Non-working edges of the work surface shall be provided with machine
pressed 0.5mm thick PVC lipping/ edge binding.
(f) The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and
side panels. Side’s panels should be made from 18mm thick pre laminated Particle board of
approved shade. All working or non working edges shall be provided with machine pressed
2mm thick PVC edging using special hot melt glue at hot temperature.
(g) The cable manager on the work surface shall be of flexible plastic component for easy and
safe passage of wires.
(h) Plastic keyboard pullout tray made up of durable ABS (Acrylonitrile Butadiene Styrene)
material shall be on smooth sliding telescopic channels.
10
(i) Movable pre-laminated three drawer pedestal 450mmX450mmX700 mm (Using 18mm and
12mm thick boards) with two equal size drawer and one file drawer with castors.
(j) Drawers shall have channel arrangement for smooth operation, with best quality stainless
steel handle and latest technology magnetic type locking arrangement.
1.4 Adjustable wheel mounted CPU trolley
Adjustable wheel mounted CPU trolley made up of CRCA ‘D’ grade MS as per IS: 513- 1994 duly
powder coated (coating thickness 50 to 60 micron).
1.5 Specification of Powder Coating
(a) Powder coating shall be with Epoxy powder of a standard shade or as required.
(b) The specific gravity of powder should give DFT (Dry Film Thickness) of 50 – 60 micron.
(c) It should withstand salt spray test of not less than 1000 hrs as per ASTM- B- 117.
(d) SCRATCH HARDNESS TEST as per DIN 53153 shall be conducted and results should be
such that no scratch shall show bare metal with a load of 3 kgs.
(e) Following seven step phosphating process treatment to be conducted before powder coating.
(i) Hot water rinse
(ii) Knock of Degreasing
(iii) De-rusting
(iv) Coldwater rinse
(v) Activation
(vi) Phosphating
(vii) Passivation
11
1.6 Work Station Chairs:
(a) Medium back rest ergonomically designed
revolving chairs. Seat Size :- Min :H - 914mm x W
622mm x D-457mm Max:H-1003mm x W-
622mmxD-457mm. Seat of the chair is made up
of 12- 15mm thick hot pressed ply wood
upholstered with net fabric in front and back in
ABS, moulded with polyurethane foam.
(b) The chair should have a hydraulic gas-lift (As per
DIN 4550 2004-12 - class 3) for seat height
adjustment and push back mechanism.
(c) Fabric shall be fire retardant (As per ASTM D
1230-1994, IS: 11871-1986).
(d) The prong (base) is 620mm pitch center dia
(660mm with castors). The telescopic bellows is 3
piece telescopic type and injection moulded in
black polyurethane. The pneumatic height
adjustment shall have adjustment stroke of 75mm and operated at 30kgs extension force.
(e) The chair base should be of nylon material (BIFMA 5.1) for strength with 5nos. Twin nylon
wheel castors (castor wheel dia. 50mm) (As per ANSI/BIFMA X5.1-2002).
(f) There should be armrest and push-back mechanism (Mechanism Synchro-1 locking) with test
report as under:-
1. Nylon Caster - ANSI/BIFMA X 5.1- 2002
2. Nylon Base Dia 640 - BIFMA 5.1
3. Gas lift DIN 4550: 2004-12 - Class 3
4. Mechanism Synchro-1 (locking) - ANSI/BIFMA X5.1 - 2002
5. Fabric Flammability - ASTM D 1230-1994 , IS:11871:1986
1.7 Raceways:
The raceways are made out of 0.8mm thick CRCA & powder coated. The electrical raceway can
be provided below worktop or above worktop, these are hookon type which will be mounted on
the verticals. The skirting/data raceway is hallow and will be mounted on the raceway channels.
1.8 Wire Management:
The partition has two integrated raceway provided one at skirting level and another at the work
surface level thus ensuring separation of power and networking cables. The free space available
within raceway accommodates power, data and communication cables.
12
The cable can be taken into the Frame either from the ceiling through power pole or from the
bottom. Once the cables enter the Frames, it can be taken from one end to the other end
continuously as per Power / LAN layout plan. Approximately 60-75 (5mm Dia) cables can be
accommodated in the raceway channels.
The raceways are provided with CRCA Snap cover on both side of raceways where required or
on one side depending upon where worktop is being used. The second raceway at work top level
can be given either below tabletop or above tabletop. The cable running at skirting level can be
terminated at tabletop level through disciplined wiring channels inside the frames.
The raceway covers will be provided with appropriate electrical switch cutouts, as per the samples
of switches provided , The number of cutouts in each workstation would depend upon the size of
the switches.
2.0 Storage:-
(a) Storage L-1050 shall be of pre-
laminated interior grade particle Board
confirming to IS: 2046-1995, Top and
side made up of 25mm shelves &
shutters of 18mm thick and back with
8mm pre-laminated particle board with
2mm thick PVC edge banding, having
latest technology magnetic lock.
(b) It should have two adjustable shelves &
two doors for effective space utilization.
(c) All working and non working edges to
be provided with 2 mm thick PVC
lipping fixed with hot melted glue. The
storage shall not have any sharp edges
(d) Metal leveller brackets shall be
provided to give extra strength.
(e) It should be of desired shade as
approved by RSCL authorities.
13
3.0 Reception area:-
3.1 Reception Desk
(a) Reception desk to be as per approved photograph. Reception counter is the décor which
plays the key role in kind of business sector to achieve the business. Reception desk as per
photograph is made up of 25mm thick pre laminated particle board with PVC edges. The
table top is supported with 18mm thick under structure of side panels and modesty panels.
(b) The front of the table is provisioned with designed wooden panel & given an extra glass top at
1050mm height. The table includes a mobile pedestal of size L- 400mm x D-450mm x H-
650mm made of 18mm thick pre-laminated particle board with PVC edges. The pedestal is
provisioned with 2 drawers and one filing drawer with locking facility.
3.2 Reception Chair
(a) Medium Back, Breathable mesh back with cushioned fabric
seat, adjustable lumbar support, Adjustable armrest with PU
padding and any position locking, Back five star chrome
base hooded casters, seat cushion upholstered on thick
water proof plywood cut foam, any PO.Size:-H-910mm x W-
660mm x D-470mm / Max :-H-990mm x W-660mm x D-
470mm
14
3.3 Reception Sofa (two seater)
(a) Contemporary designed Two seater sofa of size:-
L- 1465mm x D- 920mm x H-790mm.
Supplying and placing in position of a
contemporary designed Two seator sofa. Crafted
from 1 coloured fabric which is fitted perfectly to
its solid constructed frame of pine wood. A
squared base & compact design & asymmetrical
and vertical arm rests to give it a modern look.
3.4 Side table
Supplying and placing in position of a Side table of Size:
(L)445mm x (D)455mm x(H) 455mm.The table is standing on
high quality stainless steel material.
4.0 Cabins:-
4.1 CEO’s Cabin
(a) CEO’s desk to be as per approved photograph. Executive Desk Size: L- 1800mm x B- 900mm
x H-750mm with a circular joining top. Side Table Size: L- 1200mm x B- 600mm x H-730mm
Supplying and placing in position of the CEO’s Desk. Functional and stately, with a sturdy design
style. Featuring a cherry finish, with delicate panel moulding. The office desk to be with the side
runner having enough storage space. Pedestal having three drawers to store essentials. Drawers
with stylish handle to enhance the look.
15
4.2 CEO’s Chair
Supplying and placing in position of High Back, Breathable
mesh back wih cushioned fabric seat, Adjustable lumbar
support, Adjustable armest with PU padding and any position
locking, Back five star chrome base hooded casters, seat
cushion upholstered on thick water proof plywood cut foam ,
any PO.Size:-H-1120mm xW-650mmxD-470mm / Max :-H-
1220mm xW-650mmxD-470mm
16
4.3 Manager’s Cabin
(a) Manager’s desk to be as per approved photograph. Size: L- 1800mm x B- 750mm x H-
750mm. Side Table Size: L- 750mm x B- 350mm x H-750mm
Supplying and placing in position of the Manager’s Desk. Functional and stately, with a sturdy
design style. The office desk to be with a modesty guard and side runner having enough storage
space. Pedestal having three drawers to store essentials. Drawers with stylish handle to enhance
the look.
4.4 Manager’s Chair
Supplying, and placing in position of revolving Medium
back Chair as per photograph. Seat Size :- Min :H-914mm
xW-622mmxD-457mm Max:H-1003mm xW-622mmxD-
457mm Seatof the chair is made up of 12-15mm thick hot
pressed ply wood upholstered with net fabric in front and
back in ABS, molded withpolyurethane foam. The chair
shall have gas height adjustment and push back
mechanism .The arms of thechair shall be fixed with poly
propelene finish. The prong (base) is made of nylon and
fitted with 5nos. twinwheel castors (castor wheel dia.
50mm). The prong (base) is 620mm pitch center dia
(660mm with castors).The telescopic bellows is 3 piece
telescopic type and injection molded in black
polyurethane. The pneumaticheight adjustment shall have
adjustment stroke of 75mm and shall be operated at
30kgs extension force.
17
5.0 Conference:-
5.1 Conference Table (capacity: 17 people)
Table Module Size: L- 1350mm x B- 600mm x H-750mm. Single seater quarter table: L- 600mm x
B- 600mm x H-750mm
Supplying, and placing in position of a U-shaped Table as per photograph. Modular table top
made up of 25mm pre laminated particle board and under structure shall be made of with MS
powder coated triangular shaped legs with connectors. The working edges shall be provided with
machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision
of 4 Nos. flips top box (cable cubbie) and 4 no.junction box for wire management.
5.2 Conference/ Meeting Chair
Supplying and placing in position of Medium back chair of
maximum size (D)483mm X (H)1067mm X (W) 610mm & minimum
size (D)483mm X (H)965mm X (W) 610mm with Closed loop arms
with soft touch leatherette ; Chrome painted base with nylon
castors. Control designed to support individuals of petite structure
and average height. Armrests matching with base and loop shape
to get sturdy, comfort and stylish look.
18
6.0 Meeting Room:-
6.1 Meeting Table (capacity: 8 people)
Table Size: L- 1800mm x B- 900mm x H-750mm
Supplying, and placing in position of a rectangular Table as per photograph. Modular table top
made up of 25mm pre laminated particle board and understructure shall be made of with MS
powder coated triangular shaped legs with connectors . The working edges shall be provided with
machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision
of 2 Nos. flip top box(cable cubbie) and 2 no.junction box for wire management.
7.0 List of Approved makes:-
HNI
Godrej
HOF
Unicos
Wipro
Spacewood
Stellar
Durian
Damaro
Besides the above makes if furniture of other makes of supplied that should have ISO
Certification for furniture.
19
Technical Specification for Electrical Items
Description Qty Unit Unit load (W) Total Load (W)
Workstation As per
DWG Set 150 6450
1set comprises
16A Plug Socket 3 Nos.
16A Switch 2 Nos.
LAN Port 1 No.
Telephone Port 1 No.
CFO/CS/GM Room 3 Set 150 450
1set comprises
16A Plug Socket 5 Nos.
16A Switch 3 Nos.
LAN Port 1 No.
Telephone Port 1 No.
Conference Room 1 Set 450 450
1set comprises
16A Plug Socket 22 Nos. Provision in table + Projector + TV
16A Switch 22 Nos.
LAN Port 4 No.
Telephone Port 2 No.
CEO Room 1 450 450
16A Plug Socket 5 Nos.
16A Switch 3 Nos.
LAN Port 1 No.
Telephone Port 1 No.
Visitors Room 1 450 450
16A Plug Socket 3 Nos.
16A Switch 3 Nos.
LAN Port 1 No.
Telephone Port 1 No.
Printers 2 200 400
16A Plug Socket 2 Nos.
16A Switch 2 Nos.
Pantry 200 200
16A Plug Socket 3 Nos.
16A Switch 3 Nos.
8850
Diversity factor 0.7
Total Load 6195
Approved Make of Electrical Items & Modular Switches: Anchor/CONA/Legrand/V-
Guard/Havells /CG/Honeywell/Orpat/Wipro