rotor clip

Quote Form For TRUWAVE Wave Springs As soon as a standard catalogue item cannot be considered for your application, Rotor Clip can offer custom designed wave springs without expensive tooling costs and with regards to your specification criteria. Please fill out this form and send it to the Rotor Clip engineering department (Fax: +1-732-805-6474, E-Mail: [email protected]) which will check a feasible wave spring design with regards to your specifications. CONTACT INFORMATION Name: Date: Company: Department: Street: City: Postal Code / ZIP: Country: Phone: Fax: Email: Radial Guide / Pilot A multi turn flat wire wave spring has to be guided/piloted radially in order to avoid skipping of the turns. Please indicate a radial guide: Bore Diameter: a[mm] a[inch] Shaft Diameter a[mm] a[inch] e Pilots and Operates in Bore Diameter a Pilots Over and Clears Shaft Diameter a Clings in Bore Diameter* a Clings on Shaft Diameter *for Single Turn Wave Springs only Load Specifications Please define the load(s) required at given work height(s). Values in: a[N] and [mm] or a[lbs] and [inch] Static Application Dynamic Application/ Endplay Take-up ______________ at ______________ Load (Min. / Max.) Work Height ______________ at ______________ Load 1 (Min. / Max.) 1. Work Height ______________ at ______________ Load 2 (Min. / Max.) 2. Work Height Free Height: amin. amax. Cycle Life Please specify the required cycle life: a Static Application a 10 5 Cycles a > 10 6 Cycles a < 10 4 Cycles a 10 6 Cycles Operating Conditions Please define under which conditions the wave spring is expected to operate: Max. Temperature: °C / °F The spring will be in contact with:

Upload: rpeter-ag

Post on 21-Jul-2016

217 views

Category:

Documents

2 download

Report

Download

Embed Size (px):

DESCRIPTION

Wavespring design form | EN

TRANSCRIPT

CONTACT INFORMATIONName: Date:Company: Department:Street: City:PostalCode/ZIP: Country:Phone: Fax: Email:

Radial Guide / Pilot

Amultiturnflatwirewavespringhastobeguided/pilotedradiallyinordertoavoidskippingoftheturns.Pleaseindicatearadialguide:

BoreDiameter:a[mm]a[inch] ShaftDiametera[mm]a[inch]

e PilotsandOperatesinBoreDiameter

a PilotsOverandClearsShaftDiameter

a ClingsinBoreDiameter*

a ClingsonShaftDiameter*forSingleTurnWaveSpringsonly

Load Specifications

Pleasedefinetheload(s)requiredatgivenworkheight(s).Values in: a[N] and [mm] or a[lbs] and [inch]

Static Application Dynamic Application/ Endplay Take-up

______________ at______________

Load(Min./Max.)WorkHeight

______________at______________Load1(Min./Max.)1.WorkHeight

______________at______________Load2(Min./Max.)2.WorkHeight

FreeHeight: amin.amax.

Cycle LifePleasespecifytherequiredcyclelife:

aStaticApplication a105Cycles a>106Cyclesa <104Cycles a106Cycles

Operating ConditionsPleasedefineunderwhichconditionsthewavespringisexpectedtooperate:Max.Temperature:°C/°FThespringwillbeincontactwith:

Quote Form For TRUWAVE Wave SpringsType

Oneturnwithgap

Oneturnwithoverlappingends

Multipleturnswithplainends

Multipleturnswithparallelends

Multiplenestedturns

Material (Standard)

aCarbonSpringSteel(SAE1070–1090) a17-7PHConditionCH900Stainless (DINMaterialNo.:1.4568)

Special Grades

a AISI302Stainless(DINMaterialNo.:1.4319) aElgiloy(DINMaterialNo.:2.4711)a AISI316Stainless(DINMaterialNo.:1.4401) aHastelloyC276(DINMaterialNo.:2.4819)aA286(DINMaterialNo.:1.4980) aBeryllium-Copper(DINMaterialNo.:2.1247)aInconelX-750(DINMaterialNo.:2.4669) aPhosphor-Bronze(DINMaterialNo.:2.1030)

Finish

Whatisthefinishrequirementofyourapplication:

a Oiled(StandardwithCarbonSpringSteel) a VibratoryFinishing a Electropolish

a Degreased&Ultrasonic-Cleaned(StainlessSteel) a BlackOxide with________µmabrasionrate

a Passivation a Deburred a Other:_________________

Volume Delivery TimePrototypeVolume: Prototype:SeriesVolume: Series:

Description of Application / Sketch

Wider Clip Opening, Rotatable Clip, Proven Design · 2008. 3. 4. · Wider Clip Opening, Rotatable Clip, Proven Design Single Use Rotatable Clip Fixing Devices Specifications Model

clip-clap - info.brack.chinfo.brack.ch/daydeal/Bedienungsanleitungen/clip-clap-switch-125149_BA.pdf · clip-clap switch Bedienungsanleitung - 3 clip-clap switch – Der Klapp- und

Investigation of Rotor-Airframe Interaction Noise ...location of r =16R from rotor hub. The Rotor and Rotor Stand The rotor tested in this study is a carbon ﬁber rotor similar in

Product Overview for the Oil and Gas Industry - Rotor Clip · PDF filehose clamps for the automotive, appliance, oil and gas and general OEM marketplace. It is headquartered in Somerset,

Salient pole rotor vs. non salient pole rotor electricaleasy