RO

TA

RY

LIF

T V-REXTMVertical Rise Drive-On Lifts44,000, 64,000 and 80,000 lbs. CAPACITIES

V-REX vertical rise lifts service the largest vehicles in a new space maximizing design.

Lit# Rotary V-REX HD Lift Brochure.2018.08 (Supercedes Lit# Rotary V-REX HD Lift Brochure.2017.08)

©2018 VEHICLE SERVICE GROUPSM, Printed in U.S.A., All Rights Reserved. Unless otherwise indicated, ROTARY LIFT, VEHICLE SERVICE GROUPSM, DOVER and all other trademarks are property of Dover Corporation and its affiliates.

HEAVY DUTY PRODUCTIVITY FOR YOUR MAINTENANCE FACILITY

Powerful V-REX platform lifts offer superior solutions for all of your maintenance

and repair needs.

Rolling Bridge Jacks allow the front, rear, or all wheels to be lifted off the runways for brake, tire, alignment and suspension work. Jacks are supported between the runways, not on the top.

Wash Bay Kits can be installed in wash bays for easy vehicle cleaning with a certified remote stainless steel control panel.

g

Rolling Bridge Jack Retractable Wheel Kit

Runway wheel kit legs retract for easy rolling jack removal

ADDITIONAL OPTIONS:• Internal Air Kit connections for Rolling Jacks

• 12’ Ramp Kits

• Bolt on Wheel Curbs

• Electronic Height Limiter

• Heavy Duty Turntables for Alignment Service

• Tapeswitches for Inside and Outside of Runways

• Audible Descent Alarm KitPendant ControlsThe pendant allows for remote operation away from the lift console

the runways, not on the top.

Lighting unit includes 60W power supply unit, 8mm cable and suspensions

LED Runway Lighting KitAttach the light wands to runways for effective, efficient lighting where you need it.• 120V AC input voltage • 60hz

Increase bay productivity with these drive-on lift accessories

OPTIONAL LIFT ACCESSORIES

MW-500 Tire Lift reduces risk of technician injury with this 500 lbs.capacity tire lift. Air operated (100 psi) with no batteries. Includes pressure regulator to prevent overloading.

Global Contact InformationUSA: 1.812.273.1622 Canada: 1.905.812.9920 Latin America / Caribbean: 1.812.273.1622 Brazil: +55.11.4534.1995

North / South America Contact InformationSales: p 800.640.5438 e userlink@rotarylift.comTech. Support: p 800.445.5438 e techlink@rotarylift.com

Assistance for Government Purchasing

COLLAPSED HEIGHT

MAX. RISE

SHOWN WITH 10’ STANDARD RAMP - SURFACE INSTALL

LIFT COLORSRunways and Ramps Legs and Console

RAL3002RAL5005 RAL9005 RAL7040

44,000 / 64,0000 / 80,000 lbs. HEAVY DUTY CAPACITIES

Ten locking positions at convenient working heights.

Available in 22,000, 32,000 and 36,000 lbs. capacities

AND VALIDATED

Model Shown: VRX64-48X / 64,000 lbs. capacity drive-on lift / surface mounted

Model Shown: VRX80-32X80,000 lbs. capacity drive-on surface mounted lift with 10’ approach ramps and optional rolling jacks

AND VALIDATED

ENVIRONMENTALLY-FRIENDLY

TM

SPECIFICATIONS V-REX44 V-REX64 V-REX80Capacities* 44,000 lbs. 64,000 lbs. 80,000 lbs.

Available Runway Lengths 28’, 32’, 36’ 28’, 32’, 36’, 48’ 28’, 32’, 48’

Maximum RiseBottom of base to runway top

77- 3/4”

Collapsed Height 16 - 1/4”

Rise Time 90 seconds

A. Runway Lengths** 28’ / 30’**/ 32’ / 36’ / 48’

B. Overall LengthsWith standard 10’ approach ramps

38’/ 42’ / 46’ / 58’

C. Width of Runway 32”

D. Overall Width 109”

E. Distance Between Runways 45”

Motor 20 hp

Electrical Standard 3ph, 208-230 / 460 / 575

Number of legs 4

Minimum Floor Thickness 6”

* 44K, 64K and 80K capacities for all runway lengths with the exception of the 36’ runway length - 44K and 64K capacities only and the 48’ runway length - 64K and 88K capacities only.

** 30’ runway available with 2’ extension on 28’ runway. Extension not available for 32’, 36’ or 48’ runways.

Designed for facilities with limited bay space, the patent-pending V-REX lift provides versatile heavy duty vertical lifting.

Runway extensions add the versatility of a 24” wheelbase range adjustment.**

SAVE BAY SPACE AND MONEY

Superior by DesignRotary maintains the industry’s largest in-house mechanical, electrical and controls engineering staff using state of the art design, modeling and analysis software to ensure you get a well designed, reliable product.

FIVE AVAILABLE RUNWAY LENGTHS

Proudly built in Madison, Indiana, USA

77.75”

16.25

For additional world wide contact information and a complete guide to our product offering, visit us on the web at rotarylift.com.

Rotary Lift offers assistance to help you make informed decisions when it comes to purchasing equipment.

For additional information and the statutes that pertain to your area, contact our Government Sales Leader at 800.445.5438 X5655 or visit us on the web at rotarylift.com/Government-Purchasing-Assistance/.

Rotary Lift2700 Lanier Drive Madison, IN 47250, USA

Contract No. 05316

FSS Contract No. GS07F294AA

The World’s Most Trusted LiftTM www.rotarylift.com

Contract No. 061015-RRL

Rotational Hinged Leg Links (U.S. Patent No. 9,796,569 B2)

44,000 / 64,000 / 80,000 lbs. CAPACITIES

Model Shown: VRX80-48X80,000 lbs. capacity drive-on liftSurface mounted with 10’ approach ramps and optional rolling jacks

V-REX Vertical Rise Drive-On Lifts

Wide Platform Top Plates create a greater drive on area with a non-skid platform surface for traction.

Independant Runways are specially designed to minimize deflection under the heaviest loads

10’ Extended, Low-Profile Ramps are standard on surface models

AND VALIDATED

TM

Environmentally FriendlyAll VREX lifts are bio fluid compatible and 99% recyclable.

Large Torque Box Runway Design with engineered tubular steel creates a rigid workplatform and peace of mind for technicians.

77” Vertical Rise Technicians now have the height to get repair work done on any heavy-duty vehicle.

PRODUCTIVITY and PERFORMANCE FEATURES

s. CAPACITIES

• 3 heavy duty lifting capacities with 5 runway lengths

• Ten locking positions at convenient and technician- friendly working heights

• 3 installation configurations: Surface / Recessed Pit / Flush

• Platforms are extra wide for easier drive on and off

• Lift is removable and re-locatable with only 16 anchors

• Manual lowering in the case of a power outage

• Durable zinc primer and epoxy lift paint for long life in any environment

• ALI third-party Gold Certified

The Rotary V-REX TM services your largest vehicles while setting a new strength and reliability standard in vertical rise lifts.NEW Innovative Vertical Rise Design THE MOST RIGID PLATFORM IN THE INDUSTRY - PEACE OF MIND UNDER THE HEAVIEST LOADSFour bar engineered rotational linkage transfers lower shear forces to the foundation, optimizing lift efficiency and decreasing installation costs. This positive force leg design requires less maintenance than comparable designs and the superior structural steel tubing and fixed plate runway design has maximized the runway stiffness vs thinner cross sections found in similar lifts. Rotary’s innovative leg design incorporates heavy-duty bearings to ensure a long lift life.

The V-REX’s leg design features rotational hinge links with composite and UHMW bearings. They rotate and pivot rather than slide to increase efficiency and reduce wear. The 2”solid steel leg construction performs betterthan plate/ tube combinations which can flex and create stress points.

EXCLUSIVE PATENTED LEG DESIGNRotational Hinged Positive Force LinksLIFTING THE LARGEST VEHICLES WITH EASE

2” thick high-strength steel links

The V-REX lift contains limited sliding components or wear items to inspect or maintain

2” and 3” pins provide increased surface area to reduce loading on the pivoting members.

Automatic RearWheel Chocks engage when the lift is raised and release when lowered

Platform FrontWheel Stops

Control UnitBuilt with robust, simple buttons and switches for long life, the lift can be programmed with multiple height presets.

The microprocessor-controlled unit monitors all mechanical and electrical synchronization systems at over 125 times per second.

Open Front and Rear Design creates working clearance through the entire middle of lift.

Superior Mechanical LocksRotary’s proven negative rake mechanical locks on each lifting mechanism are position monitored for increased reliability and operation. They are made of high strength, wear resistant steel with exclusive negative rake radius teeth and ten locking positions.

Communication cables are protected in an industrial

energy chain.

Each lifting leg assembly features a robust 7” lifting cylinder system that "breathes" at the control panelimproving cycle life and eliminating downtime seen in other designs. These maximum force, short stroke hydraulic cylinders utilize a leg design that lifts vehicles with little movement. Cylinders are protected by our proven negative rake high strength steel locking system and scissor legs

NEW Patent Pending DirectCylinder Stroke Measuring SystemIncorporated within the cylinder, this controlled equalization technologydirectly measures cylinder stroke keeping the platforms level during lift operation. Locating sensors with-in the cylinder prevents damage andexpensive recalibration visits.

ROTARY LIFT HEAVY DUTY

Model Shown: VRX44-48X44,000 lbs. capacity

surface mounted drive-on lift

AND VALIDATED

Model Shown: VRX44-28X / 44,000 lbs. capacity drive-on liftSurface mounted with 10’ approach ramps and optional rolling jacksAND VALIDAT

ED