rosturi de dilatare 2
TRANSCRIPT
DINATHEQUE2009-2010 - english
4
28
INFORMATIONS 2009
50
58
78REFERENCES FOR SCREWS For easy nding, item n of screws are integrated into product charts (last column) PACK Packing unit (cardboard, box, bag or tube) ND = pack unit is minimum quantity UNIT PRICE AND QUANTITIES < PACK - Small quantities (< pack unit) of any reference can be sold, except adhesive tapes and those marked with ND. - In this case price mentioned in column PCE will apply.
86
104
M
MAXI-PACK - Products which appear in Maxi-Pack column are supplied by multiples of pack unit. - These conditions only apply for references which appear in Maxi-Pack column.
144
PRODUCTS MARKED : LOW PRICE Those are products with optimised quality price ratio.POSE
166
TECH
NEW
i i !
ADVICES FOR PRODUCTS INSTALLATION TECHNICAL INFORMATION ABOUT PRODUCTS NEW PRODUCTS IN 2009 DYI PACKING AVALAIBLE Products suitable for display stands presentation. REFERENCE To another imprint or a specic documentation. FLOOR HEATING Suitable for heated oors.
220
230
238
244
www.dinac.com
RC : B 403 348 - SIRET 40 334 897 200 049 APE 2512 Z TVA : FR 58 40 33 48 972 - CNUF : 323356
CONTENTSTRANSITION AND STOPPING PROFILESScrew down proles Self adhesive trims Invisible tting trims Expansion joints covers Access and area delimitation ramps Doors stoppers Grippers, smooth edge and proles for stretched carpet laying Skirtings
46 8 11 14 18 20 22 23
STAIR NOSING PROFILESISBA stair nosing proles Metallic grooved stair nosing proles Traditionnal stair nosing proles Extendable stair nosing proles ISBATEX stair nosing proles For soft oor coverings PVC stair nosing proles Adjustable stair nosing proles Stair nosing proles deco Non slip proles Non slip insert Curving
2830 32 34 35 36 38 40 41 42 43 44 46
SCREWS PROTECTION PROFILESWall corner guards Protection plates Wall protections Handrails
48 5052 55 56 57
EXPANSION JOINTS COVER SYSTEMSExpansion joints systems assemblies heavy duty Components for expansion joints systems heavy duty Expansion joints systems assemblies light and medium duty Components for expansion joints systems light and medium duty Components for expansion joints systems wide gaps Joint cover Accessories
5862 64 66 69 74 76 77
LIGHTED PROFILESProles Dinalite system - continuous lighting Dinaled system - spot lighting
7882 84 85
PARQUET AND LAMINATE FLOORINGSTransition and edge proles DINAP Tecnis DUO Tecnis TRIO Invisible tting trims Edges Adjustable edge trims and stair nosing proles Adjustable HDF proles Classical stair nosing proles
8688 89 90 92 95 98 100 102
2
| www.dinac.com |
|
Dinatheque 2009-2010 WP
|
PROFILES FOR CERAMIC TILESFloor nishing proles Wall nishing proles Stair nosing proles Movement and screed joints Water drainage and water proong systems Shower draining system Frames and inspection cover sets Water traps Accessories
104106 116 122 129 134 137 138 140 142
4
ENTRANCE MATSAravis Oisans Cleanluxe Accessories Mats by roll Fixed size mat Mats with logo Honeycomb mats Ordering assistance
144148 150 151 152 154 157 160 161 162
28
50
58
TOOLSIndividual protection equipment Cutting tools Measuring, drawing, miscellaneous Preparation of suboors Preparation of parquet and laminate oorings Preparation of stretched carpets Laying vinyl oorings Laying ceramic tiles
166170 174 182 188 200 203 204 214
78
86
PRO ADHESIVESMasking Jointings Double sided Packaging Repair Safety and warning
220222 224 225 226 227 228
104
144
DISPLAY STANDSFor transition and stair nosing proles For ceramic tiles proles POS advert for transition and stair nosing proles POS advert for ceramic tiles proles
230232 233 234 236
166
220
INSULATIONGap sealers Door bottom seals Ancillary products
238240 241 243
230
DO IT YOURSELF RANGESoft oorings department Parquet/laminate ooring department Tooling
244246 252 261
238
REFERENCES ALPHABETICAL INDEX COLOUR CHARTwww.dinac.com
262 270 ap
244
|
|
Dinatheque 2009-2010 WP
|
|
3
TRANSITION PROFILES They allow a smooth transition between two similar or different oor coverings. They might be at same level or cause a difference in height. DINAC is offering a suitable technical and aesthetical solution for any of those cases.
STOPPING PROFILES They board and stop oor coverings, walls and kitchen boards, ... and are part of the interior decoration.
WAYS OF FITTING : Screw down, self adhesive, invisible tting, simultaneous tting. MATERIALS : Stainless steel, coated steel, brass, mill nish, gold anodised aluminium, wood synthetic materials, metal proles with deco lm.
Most proles can be lacquered on request.
4
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
TRANSITION AND STOPPING PROFILES
Screw down proles Self adhesive trims Invisible tting trims Joints cover Areas access and delimitation ramps Doors stoppers Grippers, smooth edges and proles for stretched carpet laying Skirtings
6 8 11 14 18 20 22 23
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
5
TRANSITION AND STOPPING PROFILES - SCREW DOWN PROFILESScrew down proles Self adhesive | Invisible tting trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets | Skirtings trimsLength of prole (m) Nb holesCountersunk dril. hole 3,8 mm
F
Punched hole 3,6 mm
P
Center mm 175 210 190 210 190 180
Punched or drilled, they can be used on any support except oorings with oor heating. Extra at proles to be used only for transition between two supports at same level. Flat proles can compensate level differences up to 3 mm.Screws and accessories : see pages 48 - 49 MATERIAL COLOUR CODE CNUF 323356 KEY
0.63 0.73 0.83 0.93 1.66 2.70
4 4 5 5 9 15
PRICE PER UNITE LENGTH PACK SCREW M PCE. PACK MAXI-PACK CODE
SCREW DOWN FLAT 30 mm
Use nickel gold brass coated screws with rounded cross head.
30
Flat screw down prole 30 mm brass
20 20 20 20 20 20 Bright 10/10 20 Stainless steel 20 20 20 20 20 Bright 12/10 20 20 Brushed 10/10 20 20 20 20 20 20 Brass Polished 10/10 20 20 20 20 20 00 00 00 00 00 00 00 00
13 13 13 13 13 13 13 13 13 13 13 13 15 01 01 23 23 23 23 23 23 23 23 23 23 50 50 50 50 51 51 51 51 17 17 17 25 25
18 18 00 00 01 01 02 02 03 03 09 09 11 12 19 00 00 01 01 02 02 03 03 09 09 01 01 09 09 01 01 09 09 18 02 09 02 09
9 9 4 4 1 1 8 8 5 5 7 7 4 4 3 3 3 0 0 7 7 4 4 6 6 8 8 4 4 5 5 1 1 7 6 5 1 0 0 2
0.63 0.63 0.73 0.73 0.83 0.83 0.93 0.93 1.66 1.66 2.70 2.70 2.70 0.93 2.70 0.73 0.73 0.83 0.83 0.93 0.93 1.66 1.66 2.70 2.70 0.83 0.83 2.70 2.70 0.83 0.83 2.70 2.70 0.63 0.93 2.70 0.93 2.70 2.70 2.70
20 100 20 100 20 100 20 100 20 60 20 60 20 20 20 20 100 20 100 20 100 20 60 20 60 30 120 30 120 30 120 30 120 10 10 10 10 10 10 10
39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 22 55 39 23 55 39 23 55 39 23 55 39 23 55 39 23 55 39 23 55 39 23 55 39 23 55 39 23 55 39 23 55 39 22 55 39 22 55 39 22 55 39 22 55 39 23 55 39 23 55 39 23 55 39 23 55 39 15 00 39 15 00 39 15 00 39 16 00 39 16 00 39 34 55 39 55 55
30 mm Low priceStainless steel Bright
4
P3,5 30Brass coated steel
35 mm
P5
Stainless steel Bright 10/10
35
Brass
20 20 20 20 Polished 12/10 20
50 mm
P7
Stainless steel Bright 12/10 Brass Polished 1210
20 00 11 20 22 11
50
70 mm
Stainless steel Bright 15/10
P6,5
Brass
20 20 20 Polished 15/10 20
11 11 21 21
02 11 02 11
4 6 3 5
0.93 2.70 0.93 2.70
5 5 5 5
39 34 55 39 34 55 39 55 55 39 55 55
70
6
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
SCREW DOWN PROFILES - TRANSITION AND STOPPING PROFILESScrew down proles Self adhesive | Invisible tting trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets | Skirtings trims
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M
PRICE PER UNIT PCE. PACK
SCREW CODE
90 mm
Stainless steel Brushed 15/10 20 12 11 Brass Polished 15/10 20 30 11
3 7
2.70 2.70
5 5
39 34 55 39 55 55
P6
90
SCREW DOWN FLAT REINFORCED 35 mm
Brass Anodised aluminium
F4 35
Polished Silver Gold Champagne Titium
20 20 20 20 20
35 43 63 63 54
11 09 09 29 09
2 4 2 0 0
2.70 2.70 2.70 2.70 2.70
10 20 20 20 20
39 16 00 39 18 00 39 16 10 39 16 10 39 16 20
40 mm
F4,5 40
Anodised aluminium
Silver Gold Champagne Titium
20 20 20 20
46 67 67 68
09 09 29 09
5 0 8 7
2.70 2.70 2.70 2.70
20 20 20 20
39 18 00 39 16 10 39 16 10 39 16 20
50 mm
Brass
Polished
20 29 11
1
2.70
5
39 55 55
F4 50
SCREW DOWN EXTRA FLAT 38 mm
F2,5 38
Anodised aluminium
Silver Gold Champagne Titium
20 20 20 20
55 56 56 57
09 09 29 09
7 4 2 1
2.70 2.70 2.70 2.70
10 10 10 10
39 18 00 39 16 10 39 16 10 39 16 20
SCREW DOWN 2 LEVELS 2 mmAnodised aluminium Silver 20 66 10 9 3.00 10 39 18 00
F6 4 40
3.5 mm1,8
F28
Anodised aluminium Brass
Silver Gold Titium Polished
20 20 20 20
70 71 72 73
09 09 09 09
0 7 4 1
2.70 2.70 2.70 2.70
20 20 20 20
39 18 00 39 16 10 39 16 10 39 23 55
SCREWS Stainless steel proles - Rounded cross head
5,4
3.5 X 25 mm Nickel coated 3.5 X 30 mm steel 3.5 X 35 mm 3.5 X 25 mm Brass coated steel 3.5 X 30 mm 3.5 X 35 mm
39 22 55 39 15 00 39 34 55 39 23 55 39 16 00 39 55 55 39 18 00 39 16 10 39 16 20
8 0 1 5 7 6 1 6 5 1 box of 200 screws 1 box of 200 screws 1 box of 200 screws
Brass proles - Rounded cross head
Aluminium proles - Rounded cross head
Aluminium 3.5 X 30 mm Zinc plated st. 3.5 X 30 mm gold/champ. Zinc plated st. 3.5 X 30 mm titium
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
7
TRANSITION AND STOPPING PROFILES - SELF ADHESIVE TRIMSScrew down proles Self adhesive trims Invisible tting trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets | Skirtings
Specially designed for hard and soft oor coverings. Do not t onto textile oor coverings. Remove any mark of old glue, adhesive or grease (avoid using gasolin and white spirit which are too fat). Make sure supports are perfectly dry. Remove protective lm, set trim into position and press it down.CODE CNUF 323356 KEY PRICE PER UNITE LENGTH PACK M PCE. PACK MAXI-PACK
MATERIAL
COLOUR
SELF ADHESIVE TRIM FLAT 30 mm Hotmelt Low priceStainless steel Bright
30Brass coated steel
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
55 55 55 55 56 56 56 56 60 60 60 60 60 60 60 60 60 60 65 65 65 65 65 65 65 65 65 65 11 11 11 11 11 15 15 15 15 14 14 20 20 20 20 20
01 01 09 09 01 01 09 09 00 00 01 01 02 02 03 03 09 09 00 00 01 01 02 02 03 03 09 09 00 01 02 03 09 00 01 02 11 02 09 00 01 02 03 09
3 3 9 9 0 0 6 6 0 0 7 7 4 4 1 1 3 3 5 5 2 2 9 9 6 6 8 8 2 9 6 3 5 2 7 4 6 7 6 4 1 8 5 7
0.83 0.83 2.70 2.70 0.83 0.83 2.70 2.70 0.73 0.73 0.83 0.83 0.93 0.93 1.66 1.66 2.70 2.70 0.73 0.73 0.83 0.83 0.93 0.93 1.66 1.66 2.70 2.70 0.73 0.83 0.93 1.66 2.70 0.73 0.83 0.93 2.70 0.93 2.70 0.73 0.83 0.93 1.66 2.70
30 120 30 120 30 120 30 120 20 100 20 100 20 100 20 80 20 80 20 100 20 100 20 100 20 80 20 80 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
30 mm Hotmelt
3,5
3,5
30
Stainless steel
Bright
Brass
Polished
30 mm ButylBright 10/10
4
30
Stainless steel Bright 12/10
Brushed 10/10
BrassSelf adhesive trim at 30 mm stainless steel
Polished 11/10
The BUTYL based adhesive is formulated and manufactured by DNAC. Advantages of BUTYL adhesive : - long lasting adhesive properties - very good resistance to extreme changes of temperatures - high chemical resistance - allows compression and expansion of supports 8 www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
SELF ADHESIVE TRIMS - TRANSITION AND STOPPING PROFILESScrew down proles Self adhesive trims Invisible tting trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets | Skirtings
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M
PRICE PER UNIT PCE. PACK
30 mm ButylSilver
30
Anodised aluminium
Gold
Champagne
Titium Alder Canada Cereja Blond oak Ceruse oak Clear oak Golden oak Patina oak Rustical oak Coated aluminium Exotica Fruita Beech Clear beech Walnut Pinewood Honey teck Wenge board Others colours* Stainless steel Brass Bright 10/10 Polished 12/10
Self adhesive trim at aluminium coated beech
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84 84
30 30 30 30 30 31 31 31 31 31 31 31 31 31 31 32 32 73 73 71 74 74 73 74 73 70 72 71 70 72 72 74 74 74 73
00 01 02 03 09 00 01 02 03 09 20 21 22 23 29 02 09 19 29 89 09 19 49 29 59 09 09 69 19 29 49 39 49 69 89
3 0 7 4 6 0 7 4 1 3 8 5 2 9 1 1 0 2 1 1 0 9 9 8 8 2 6 3 1 4 2 7 6 4 5 3 7
0.73 0.83 0.93 1.66 2.70 0.73 0.83 0.93 1.66 2.70 0.73 0.83 0.93 1.66 2.70 0.93 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10 10
35 mm Butyl5
4
00 16 11 00 21 11
35
SELF ADHESIVE TRIM FLAT REINFORCED 40 mm Butyl4,5Anodised aluminium
40
Silver Gold Champagne Titium
00 00 00 00
36 37 37 38
09 09 29 09
8 5 3 2
2.70 2.70 2.70 2.70
20 20 20 20
Trims suitable for heavy duty use (any kind of high trafc areas) bear reinforced designation. Usually deco trims are not suitable for heavy duty use - residential applications only. Prefer aluminium or brass.
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
9
TRANSITION AND STOPPING PROFILES - SELF ADHESIVE TRIMSScrew down proles Self adhesive trims Invisible tting trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets | SkirtingsCODE CNUF 323356 KEY PRICE PER UNITE LENGTH PACK M PCE. PACK MAXI-PACK
MATERIAL
COLOUR
ADHESIVE LEVELLING TRIMS HOTMELT LOW PRICE 40 mm Anodisedaluminium
Silver
00 89 02 00 89 09
5 4
0.93 2.70
10 10
1,2
40
ADHESIVE LEVELLING TRIMS BUTYL 30 mmBright Stainless steel Brushed
30
Brass
Polished
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
81 81 81 80 80 86 86 86 88 88 88 92 92 87 87
01 02 09 12 19 01 02 09 02 09 09 02 09 02 09
2 9 8 1 0 7 4 3 8 7 7 5 4 1 0
0.83 0.93 2.70 0.93 2.70 0.83 0.93 2.70 0.93 2.70 2.70 0.93 2.70 0.93 2.70
10 10 10 10 10 10 10 10 10 10 40 10 10 10 10
40 mmBright Stainless steel Brushed Brass Polished
1
1
40
50 mmBright
1
Stainless steel Brushed Brass Polished
00 00 00 00 00 00 00
82 82 82 80 80 84 84
01 02 09 22 29 02 09
9 6 5 0 9 0 9
0.83 0.93 2.70 0.93 2.70 0.93 2.70
10 10 10 10 10 10 10
50
ADHESIVE LEVELLING TRIMS REINFORCED BUTYL Brass 30 mm
Polished
00 83 09
2
2.70
10
1,5
30
Adhesive levelling trims 30 mm brass
Select appropriate trim according to type of oor covering. For ceramic tiles, parquet/laminate and PVC oorings it is possible to use self adhesive or invisible tting trims. Both tting types allow expansion of parquet and laminate oors. For carpets, screw down tting should be used.
10
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
INVISIBLE FITTING TRIMS - TRANSITION AND STOPPING PROFILESScrew down | Self adhesive proles trims Invisible tting trims Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets | Skirtings
6 mm maxi60 mm
40 mm
73 cm 83 cm 93 cm 166 cm 270 cm30 mm 41 mm 47 mm
3 3 4 6 12
35 mm
max. 14 mm
max. 8 mm
max. 14 mm
max. 17 mm
These trims are screwed down without any visible screw thus providing technical performance and perfect nish. The head of the nail screw slides into a goove located underneath the prole. It allows the prole to swing around and adapt exactly to oor covering thickness. Millons of proles using this tting system which received a golden medal at Batimat Innovation contest and is patended in Europe have been already successfully installed. Parquet oorings can move freely. Some colours available in 83 or 93 cm length within the DIY range.
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M
PRICE PER UNIT PCE. PACK
INVISIBLE FITTING TRIM EXTRA FLAT 35 mm1,5
35
Silver Gold Anodised aluminium Champagne Titium Alder Cereja Clear oak Rustical oak Exotica Coated aluminium Fruita Beech Clear beech Pine Taga Others colours* Silver Gold Champagne Titium
21 21 21 21 47 47 47 47 47 47 47 47 47 47 47 21 21 21 21
32 33 33 34 19 18 18 10 13 18 11 20 12 19 15 03 04 04 05
09 09 29 09 29 29 69 09 09 49 09 19 09 19 19 09 09 29 09
5 2 0 9 4 7 3 3 4 5 0 1 7 5 7 5 2 0 9
2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70
10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 10 10 10 10
35 mm grooved5Anodised aluminium
5 2
35
*See colour chart on last page
INVISIBLE FITTING LEVELLING TRIMS 30 mm4,5
Brass
Polished Silver
30Anodised aluminium Gold Champagne Titium
21 21 21 21 21 21 21 21 21 21
20 20 60 60 61 61 61 61 62 62
02 09 02 09 02 09 22 29 02 09
3 2 9 8 6 5 4 3 3 2
0.93 2.70 0.93 2.70 0.93 2.70 0.93 2.70 0.93 2.70
10 10 10 10 10 10 10 10 10 10
Invisible tting levelling trim 30 mm aluminium silver
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
11
TRANSITION AND STOPPING PROFILES - INVISIBLE FITTING TRIMSScrew down | Self adhesive proles trims Invisible tting trims Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets | SkirtingsCODE CNUF 323356 KEY LENGTH PACK M PRICE PER UNIT PCE. PACK
MATERIAL
COLOUR
30 mm
Invisible tting levelling trim 30 mm coated aluminium beech
Africa Blond oak Ceruse oak Clear oak Golden oak Rustical oak Exotica Ash Coated aluminium Fruita Beech Clear beech Walnut Pine Pinewood Honey teck Wenge board Others colours* Brass Polished Silver Gold Champagne Titium Africa Alder Canada Cereja Cerno Blond oak Ceruse oak Clear oak Golden oak Patina oak Rustical oak Cumulus Exotica Ash Fruita Coated aluminium Beech Clear beech Pastel yellow Walnut Paorose Pine Pinewood Old pine Sand Scandia Taga Honey teck Tropica Wenge board Others colours*
47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 21 21 21 21 21 21 21 21 21 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47 47
09 00 00 08 00 00 03 08 08 01 09 09 02 00 00 00 01 38 49 49 48 48 48 48 47 47 29 29 30 28 29 21 21 28 21 30 20 27 23 28 28 21 30 28 29 29 22 21 27 27 28 29 21 30 21 30
09 19 29 69 39 09 09 19 49 09 89 39 09 49 59 69 90 09 02 09 02 09 22 29 02 09 09 29 49 29 49 19 29 69 39 19 09 19 09 19 49 09 29 79 39 59 09 49 09 29 39 19 59 39 69 50
7 3 2 4 1 4 5 9 6 1 9 4 8 0 9 8 9 7 4 3 7 6 5 4 0 9 5 3 7 6 1 8 7 2 6 0 2 0 3 7 4 9 9 1 2 0 6 5 1 9 5 4 4 8 3 3
2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 0.93 2.70 0.93 2.70 0.93 2.70 0.93 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
41 mm
41
Anodised aluminium
Aluminium proles are wrapped in a printed deco lm. for abrasion and UV resistance, a wear coating protects the printed surface. Design and choice of colours is made with parquet and laminate manufacturers.
12
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
INVISIBLE FITTING TRIMS - TRANSITION AND STOPPING PROFILESScrew down | Self adhesive proles trims Invisible tting trims Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets | Skirtings
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M
PRICE PER UNIT PCE. PACK
41 mm groovedAnodised aluminium
Silver Gold Champagne Titium
21 21 21 21
36 37 37 35
09 09 29 09
3 0 8 6
2.70 2.70 2.70 2.70
10 10 10 10
41
47 mm
Anodised aluminium
47
Invisible tting levelling trim 47 mm aluminium gold
Silver Gold Champagne Titium Blond oak Golden oak Ceruse oak Rustical oak Exotica Fruita Coated aluminium Beech Clear beech Pinewood Scandia Honey teck Wenge board Others colours*
21 21 21 21 47 47 47 47 47 47 47 47 47 47 47 47 47
59 58 58 57 31 31 31 30 33 38 31 39 31 38 31 31 40
09 09 29 09 19 39 29 09 09 49 09 89 49 39 59 69 89
2 5 3 8 7 5 6 1 2 3 8 6 4 4 3 2 2
2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70
10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5
All trims are supplied with 41 mm nail-screws and plugs. For level difference > 14 mm, use 55 mm nail-screws reference 39 37 01. ACCESSORIES FOR INVISIBLE FITTING TRIM Nail-screws and plugs41 mm nail-screws for oor coverings from 0 to 15 mm 55 mm nail-screws for oor coverings from15 to 23 mm 39 13 01 39 37 01 3 1 box of 120 screws + plugs 9
Drill bit diam. 6 mm
drill bit
39 50 10
0
1
Enables double size drilling (plug body, plug head) in one go.
Alignment joint 40 mm
39 25 00
9
1 box of 100 pcs
They allow perfect alignment of several lengths of prole.
Adhesive foam strip for 35 mm extra at cover Double sided 10 mm x 27.50 meter
39 70 27
6
1
Double sided adhesive on one side only. This enables prole to follow expansion movements of oor covering. Allows adhesive tting of prole.
Accordon base for tting levell cover trims 30, 41 and 47 mm Adhesive
39 69 02 39 69 09
7 6
0.93 2.70
5 5
Replaces nail-screws when oor drilling not possible : oor heating. Not suitable for extra at 35 mm.
35
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
13
TRANSITION AND STOPPING PROFILES - JOINTS COVERSScrew down | Self adhesive | Invisible tting trims proles trims Joints covers Access ramps | Doors stoppers | Profiles for stretched carpets | Skirtings
Width of expansion opening should not exceed 1/3 rd of joint cover width. Use on oor to cover expansion openings.
Others expansion joints are available in expansion joints range p.76 SCREW DOWN FLOOR JOINTS COVERS 70 mmCenter : 190 mm, 16 holes.
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK PRICE PER UNIT M PCE. PACK
SCREW CODE
Stainless steel Brass
Bright 15/10 Polished 15/10
01 05 11 01 08 11
4 5
3.00 3.00
5 5
39 34 55 39 55 55
P6,5
15 70
Joints covers drilled on one side to enable expansion movements.
90 mmCenter : 190 mm, 16 holes.
Stainless steel Brass
Bright 15/10 Polished 15/10
01 06 11 01 09 11
1 2
3.00 3.00
5 5
39 34 55 39 55 55
P6
15 90
SCREW FOR JOINTS COVERS Stainless steel joint cover - rounded cross head screw
Nickel coated steel
3.5x35 mm
39 34 55
1
1 box of 200 screw
Brass joint cover - rounded cross head screw Brass coated steel 3.5x35 mm
39 55 55
6
1 box of 200 screw
ADHESIVE FLOOR JOINT COVER 60 mmAnodised aluminium Brass Silver Polished 01 03 11 01 01 11 0 6 3.00 3.00 10 5
3,5
60
80 mm3,5
Anodised aluminium
Silver
01 13 11
9
3.00
10
80
14
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
JOINTS COVERS - TRANSITION AND STOPPING PROFILESScrew down | Self adhesive | Invisible tting trims proles trims Joints covers Access ramps | Doors stoppers | Profiles for stretched carpets | Skirtings
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M
PRICE PER UNITE PCE. PACK MAXI-PACK
ADHESIVE FLOOR JOINT COVER / CLIP 70 mm 80 mm - reinforced (industrial use) 120 mm - reinforced (industrial use)3,5
Supplied without clip. Anodised aluminium Silver Brass Polished Anodised aluminium Silver Anodised aluminium Silver
01 04 11 01 00 11 01 23 11 01 33 11
7 9 8 7
3.00 3.00 3.00 3.00
10 5 5 5
70 80 5
120
Double clip for oor joint cover
5
Stainless steel
39 05 00
1 1 bote de 10
Clip reinforces adhsive tting of joint cover. 4 clips per length (order separatly) BEVELLED EDGE ADHESIVE FLOOR JOINT COVER Supplied without clip. 60 mm AnodisedNo jolt - specially suitable for hospitals aluminium 01 14 11 01 14 11 01 15 11 01 02 11 01 16 11 01 10 11 01 17 11 01 18 11 6 6 3 3 0 8 7 4 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 10 30 10 5 5 5 5 5
Silver
80 mmNo jolt - specially suitable for hospitals
Anodised aluminium Silver Brass Polished Anodised aluminium Silver Brass Polished Anodised aluminium Silver Anodised aluminium Silver
100 mm 120 mm 140 mm4
60
Side drilling possible on request.4 80 4,5
100 4,5
120 4,5
140
Double clip for bevelled edge oor joint cover Stainless steel
39 42 00
6 1 bote de 20
Clip reinforces adhesive tting of joint cover. 4 clips per length (order separatly). Fitting via clips only. Clips to t openings up to gomm wide.
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
15
TRANSITION AND STOPPING PROFILES - JOINTS COVERSScrew down | Self adhesive | Invisible tting trims proles trims Joints covers Access ramps | Doors stoppers | Profiles for stretched carpets | SkirtingsCODE CNUF 323356 KEY LENGTH PACK M PRICE PER UNIT PCE. PACK
MATERIAL
COLOUR
ADHESIVE WALL JOINT COVER 60 and 80 mm
Supplied with 3 double clips (rf. 39 05 00) per joint cover. 12 03 09 3 2.70 Anodised Silver aluminium 12 13 09 2 2.70
10 10
66
ADHESIVE ANGLE JOINT COVER 40 x 40 mm2,5
80
Rf. 12 03 09
60
Rf. 12 13 09
BEWARE ! When ordering joint cover per unit, order clip rf. 39 05 00 separately. 1 clip every 50 cm.
Supplied with 3 single clips (rf. 39 06 00) per joint cover. Anodised aluminium Silver 12 33 09 0
2.70
10
40
BEWARE ! When ordering joint cover per unit, order clip rf. 39 06 00 separately. 1 clip every 50 cm.40
6
CLIPS FOR ADHESIVE WALL JOINT COVER DoubleStainless steel 39 05 00 1 1 box of 10 clips
Reinforces tting of oor and joint covers.
Single
Stainless steel
39 06 00
8
1 box of 10 clips
Reinforces tting of angular wall joint covers.
16
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
JOINTS COVERS - TRANSITION AND STOPPING PROFILESScrew down | Self adhesive | Invisible tting trims proles trims Joints covers Access ramps | Doors stoppers | Profiles for stretched carpets | Skirtings
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M
PRICE PER UNIT PCE. PACK
INVISIBLE FITTING WALL JOINT COVER 50 mm4
Supplied without clip. Order clip rf. 39 49 00 or 39 49 10. White RAL 9016 12 20 10 6 3.00 PVC Beige RAL 1015 12 20 12 0 3.00 Grey RAL 7035 12 20 11 3 3.00 White RAL 9016 Beige RAL 1015 Grey RAL 7035 12 21 10 12 21 12 12 21 11 3 7 0 3.00 3.00 3.00
10 10 10 10 10 10
70 mmPVC
4
70
INVISIBLE FITTING ANGLE JOINT COVER 50 mm
50
5 clips per length (to be ordered separatly)
Supplied without clip. Order clip rf. 39 49 00 or 39 49 10. White 12 25 10 1 3.00 PVC Beige 12 25 12 5 3.00 Grey 12 25 11 8 3.00 White Beige Grey 12 26 10 12 26 12 12 26 11 8 2 5 3.00 3.00 3.00
10 10 10 10 10 10
70 mm4
22PVC
22 4
70
50
Invisible tting angle joint cover PVC grey + clip
CLIPS FOR INVISIBLE FITTING WALL COVER JOINT S : 50 mm - L : 70 mm
50 mm Stainless steel 70 mm Stainless steel
39 49 00 39 49 10
5 4
1 box of 50 clips
Fitting only via clips : - S for joint width between 10 and 35 mm and 40 mm depth - L for joint width between 35 and 60 mm and 60 mm depth
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
17
TRANSITION AND STOPPING PROFILES - ACCESS RAMPSScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers Access ramps Doors stoppers | Profiles for stretched carpets | Skirtings
Ramp Nb holes RMP1 RMP2 RMP4 16 6 10
Center mm 190 580 300
They have been designed for stopping a oor/wall covering or cooking top. They are part of the decoration. Their different ways of tting : screw down, glue down, self adhsesive or simultaneous. For glue down proles use appropriate glue. These proles are suitable for compensating level difference under heavy trafc conditions and can be bent according to your wishes : forklifts...CODE CNUF 323356 KEY LENGTH PACK PRICE PER UNIT M PCE. PACK
MATERIAL
COLOUR
SCREW CODE
SCREW DOWN ACCESS RAMP - RMP1 For 3 mm oorings
Drilled. Supplied without screws. Anodised Silver aluminium
20 64 00
6
3.00
10
39 19 00
For 4,5 mm oorings
Anodised aluminium Anodised aluminium Anodised aluminium
Silver Gold Champagne Silver Silver
20 58 14 20 59 11 20 59 21 20 64 14 20 64 24
2 8 7 3 2
3.00 3.00 3.00 3.00 3.00
10 10 10 5 5
39 19 00 39 19 00 39 19 00 39 19 00 39 19 00
For 6 mm oorings For 8 mm oorings
F5 3 60 45 10,5 6,5 4,5
F
30
65
6
80 45
12,5
F80RMP 1 aluminium silver anodised
8
Screws for RMP1 - Flat cross head SCREW DOWN ACCESS RAMP - RMP2 For 21 mm oorings For 25 mm oorings
Zinc plated white 3.5x30 mm Drilled. Supplied without screws. Aluminium Mill nish Aluminium Mill nish
39 19 00
8
1 box of 200 screw 3.00 3.00 5 5 20 62 10 20 62 10
20 62 30 20 62 10
9 1
F21
20 103
F25
20 103RMP 2 aluminium mill nish
18
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
ACCESS RAMPS - TRANSITION AND STOPPING PROFILESScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers Access ramps Doors stoppers | Profiles for stretched carpets | Skirtings
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK PRICE PER UNIT M PCE. PACK
SCREW CODE
GLUE DOWN ACCESS RAMP - RMP3 For 8 mm oorings10 8Anodised aluminium Silver 20 65 14 0 2.90 5
2,5
20 56
Use appropriate glue to suit both prole and support.Drilled. Supplied without screws. Anodised Silver aluminium Anodised aluminium Anodised aluminium Anodised aluminium Anodised aluminium Silver Silver Silver Silver
SCREW DOWN ACCESS RAMP - RMP4 For 6 mm oorings For 8 mm oorings For 10 mm oorings For 12,5 mm oorings For 15 mm oorings
20 74 34 20 74 24 20 74 54 20 74 84 20 74 64
0 1 8 5 7
3.00 3.00 3.00 3.00 3.00
5 5 5 5 5
39 53 00 39 45 00 39 45 00 39 53 00 39 53 00
F8 6
65
F10 8
RMP 4 for 10 mm ooring
50
F12 10
These proles can be curved in our factory according to your templates. Feasibility according to bending radius.
50
F
18
12,5
80
F18
15
Ramp RMP4 curved anodised aluminium silver
80
Screws for RMP4 - Flat cross head
Zinc plated white 4 x 50 mm
39 53 00
2
1 box of 200 screw
Nail-screw - Flat cross head
Zinc plated
6 x 40 mm
39 45 00
7
1 box of 50 screw + plugs
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
19
TRANSITION AND STOPPING PROFILES - DOORS STOPPERSScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers | Access ramps Doors stoppers Profiles for stretched carpets | SkirtingsCODE DIAM. CNUF 323356 KEY MM PRICE PER UNIT PCE. PACK
All packings suitable for display stands
MATERIAL
COLOUR
PACK
RUBBER FLOOR STOPPERS SCREW DOWN FITTING White rubber stopper single Brass body +Height : 23 mm. Supllied with screw. screws steel Brass body + screws steel Rubber
Brass plated Nickel plated Brass plated Nickel plated White Black White 35 mm White 21 mm
36 52 11 36 52 12 36 52 13 36 52 14 36 52 21 36 52 22 36 52 23 36 52 24
0 7 4 1 9 6 3 0
30
1 bag of 12 1 bag of 12 5
White rubber stopper + 15 mm raiserheight : 38 mm. Supllied with screw.
30
Round shaped rubber stopperHeight : 30 mm. Supllied with screw and plug. 2 pcs per bag
29
Cylindrical rubber stopper low priceSupplied without screws an plugs. 6 pcs per bag.
Rubber
5
Round shaped metal stopper White rubber stopper
Cylindrical rubber stopper low price
SHAPED OR WOOD FLOOR STOPPERS SCREW DOWN FITTING Wooden stopper + rubber ringHeight : 50 mm. Supplied with screw and plug.
Wood
Clear Dark Gold Brushed Gold Brushed Chromated Bronze
36 52 15 36 52 16 36 52 17 36 52 18 36 52 34 36 52 35 36 52 19 36 52 20
8 5 2 9 9 6 6 2
38
5 5 5 5 5 5 5 5
Shaped stopper 35 mmHeight : 35mm. Supplied with screw and plug.
Steel
38
Shaped stopper 45 mmHeight : 45mm. Supplied with screw and plug.
Stainless steel
31
Cone shaped stopperHeight : 32 mm. Supplied with screw and plug.
Steel
40
Gold nifh dark clear Wooden stopper + rubber ring
Brushed nish Steel chromated Steel bronze
Shaped stoppers
Cone shaped stoppers
WALL STOPPERS - SCREWS DOWN SKIRTINGS Wooden wall stopperLength : 84 mm. Supplied with screw and plug. Wood
Clear Dark Mill nish Chromated
36 52 25 36 52 26 36 52 27 36 52 28
7 4 1 8
28
5 5 5 5
Metal wall stopperLength : 75 mm. Supplied with screw and plug.
Steel
Wood wall stopper low priceLength : 70 mm. Supplied without screw and plug. 4 pcs per bag
Wood
Clear Dark
36 52 29 36 52 30
5 1
30
5 5
Wall stopper - mill nish wood
Metal wall stopper
Wall stopper low price - dark wood
20
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
scale of photos 1/2
scale of photos 1/2
scale of photos 1/2
DOORS STOPPERS - TRANSITION AND STOPPING PROFILESScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers | Access ramps Doors stoppers Profiles for stretched carpets | Skirtings
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH DIAM. PACK PRICE PER UNIT M MM PCE. PACK
SCREW CODE
LAY DOWN STOPPERS Metal door blocker + 3 rubber ringsHeight : 69 mm. Weight : 1.20 kg. 1 box of 4 pcs.
Mtal
Brushed
36 52 31
8
68
4
Metal door blocker with wood nish + 1 rubber ring Metal + wood ClearHeight : 40 mm. Weight : 1.30 kg. 1 box of 4 pcs. nish Dark
36 52 32 36 52 33
5 2
101
4 4
DOOR JAMB TRIMAnodised aluminium Silver 20 45 02 20 45 10 9 4 0.93 3.00 5 5 39 18 00 39 18 00
16
45
Provides excellent thermal insulation and a very good sound deadening.
Rouned cross head screw
Aluminium
3.5 x 30 mm
39 18 00
1 1 box of 200 screw
TAP DOWN MOULDING TO BE SCREWEDAnodised aluminium Silver 20 50 09 2 2.70 20 39 19 00
10
6 mm
22
30 mm
Screw at cross head
Zinc plated st. 3.5 mm x white 30 mm
39 19 00
8 1 box of 200 screw
SELF ADHESIVE TAP DOWN MOULDINGAnodised aluminium Silver Gold Champagne Titium Polished 00 00 00 00 00 40 41 41 42 43 09 09 29 09 09 5 2 0 9 6 2.70 2.70 2.70 2.70 2.70 20 20 20 20 20
10
Brass
22
Tap down trim gold anodised aluminium
www.dinac.com
|
|
Dinatheque 2009-2010
|
scale of photos 1/2
WP
21
TRANSITION AND STOPPING PROFILES - PROFILES FOR STRETCHED CARPETSScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers | Access ramps | Doors stoppers Profiles for stretched carpets SkirtingsCODE CNUF 323356 KEY LENGTH PACK M PRICE PER UNIT PCE. PACK
Tool for laying stretched carpet : see page 203
MATERIAL
COLOUR
GRIPPERS SMOOTH EDGE WOOD GEStandard
Bandes
Standard Pre-screwed wood Pre-screwed concrete Extra large
34 34 34 34
02 12 14 20
00 00 00 00
5 4 8 9
1.52 1.52 1.52 1.52
100 100 100 50
Pre-screwed wood
Pre-screwed concrete
Extra large
STOPPING PROFILESAluminium Brass Anodised Polished 35 05 09 35 13 09 6 1 2.70 2.50 15 10
37
9,5
8
30
CLIP ON PROFILE 42 mm double sided42
Brass
Polished Glazed
35 11 09 35 09 09
7 4
2.70 2.70
6 6
7
47Anodised aluminium
50 mm one piece dual grip7,5
Silver
35 08 09
7
2.70
12
51
HEAT SEAM TAPE STRIP36 51 00 7 20.00 10
The strip enables perfect welding of carpet.
22
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
SKIRTINGS - TRANSITION AND STOPPING PROFILESScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets Skirtings
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M
PRICE PER UNITE PCE. PACK MAXI-PACK
FLEXIBLE SKIRTING SUPPORT SG20P
Rigid PVC
White
18 14 10 18 14 10
7 7
3.00 3.00
35 175
95
SG 20 + clipP
10 10 30
SG3
Rigid PVC
White
18 14 20
6
3.00
35
8
27
SG 3 + clip + skirting supp.P
Clip for SG20 and SG3
Soft PVC
Sand Ash Slate Apricot Blue Jade Staw White
18 18 18 18 18 18 18 18 18
15 15 15 15 15 15 15 15 15
10 11 12 13 14 15 16 17 17
4 1 8 5 2 9 6 3 3
3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05
35 35 35 35 35 35 35 35 175
20
10Sand Ash Slate Apricot Blue Jade Staw White
Aesthetical connection between oor and wall covering. The clip hides oor and wall covering defects. Easy tting : support to be glued down and deco strip to be clipped on. www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
23
TRANSITION AND STOPPING PROFILES - SKIRTINGSScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets SkirtingsMATERIAL COLOUR CODE CNUF 323356 KEY LENGTH PACK M PRICE PER UNIT PCE. PACK
ALUMINIUM SKIRTINGS 60 mm 80 mm 100 mm
Anodised aluminium Silver Anodised aluminium Silver Anodised aluminium Silver
Adhesive To be glued Adhesive To be glued Adhesive To be glued
18 16 10 18 16 40 18 16 20 18 16 50 18 16 30 18 16 60
1 8 0 7 9 6
3.00 3.00 3.00 3.00 3.00 3.00
10 10 10 10 10 10
Adhesive skirtings are tted out with two adhesive strips.
15
60
15 15SG7C PVC Black Brown Grey Black Brown Grey 18 18 18 18 18 18 07 07 07 10 10 10 92 19 57 92 19 57 5 2 4 5 2 4 50.00 50.00 50.00 50.00 50.00 50.00 3 3 3 2 2 2
PVC FLEXIBLE SKIRTINGS TO BE GLUED SG7C - SG10CSupplied in roll of 50m.
80
SG10C PVC
Black
Brown
100Grey
65
11
16
24
www.dinac.com
|
95
|
Dinatheque 2009-2010
|
WP
SKIRTINGS - TRANSITION AND STOPPING PROFILESScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets Skirtings
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M
PRICE PER UNIT PCE. PACK
SP6 - SP8 - SP10Supplied in rolls. SP6 PVC
SP10
SP8 PVC
SP10 PVC
SP8
Black Beige Grey Black Beige Grey Black Beige Grey
18 18 18 18 18 18 18 18 18
08 08 08 08 08 08 08 08 08
01 02 03 04 05 06 07 08 09
4 1 8 5 2 9 6 3 0
25 25 25 25 25 25 25 25 25
4 4 4 4 4 4 4 4 4
Black
Beige
Grey
SP6100
80
60
Other colours on request.
6
6
6 14 14
6 14
6
SKIRTING SUPPORT SP 12SP12 PVC
6
7,5
Black Beige Grey
18 17 00 18 17 01 18 17 02
9 6 3
2.00 2.00 2.00
20 20 20
7Black Beige Grey
Other colours on request.
100
5 20
5
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
25
TRANSITION AND STOPPING PROFILES - SKIRTINGSScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets SkirtingsCODE CNUF 323356 KEY LENGTH PACK M PRICE PER UNITE PCE. PACK MAXI-PACK
MATERIAL
COLOUR
ADHESIVE MOULDINGS FOR CARPETS 4 mmPVC
Silver Gold White Black Silver Gold White
15 15 15 15
40 41 46 42
07 07 07 07
5 2 7 9 4 1 6
2.10 2.10 2.10 2.10 2.10 2.10 2.10
20 20 20 20 20 20 20
8 mmPVC
15 50 07 15 51 07 15 56 07
7,5
10,5 10
18
5
4,5
19
7,5
RIGID SKIRTINGS SUPPORTS20 x 20 Rigid PVC 30 x 30 40 x 40 18 18 18 18 18 03 03 04 04 02 92 92 92 92 92 7 7 4 4 0 2.00 50 2.00 1500 2.00 50 2.00 1500 2.00 50
40
30
20
40
30
20
FLEXIBLE SKIRTINGS SUPPORTS20 x 20 Soft PVC 30 x 30 18 18 18 18 00 00 01 01 92 92 92 92 6 6 3 3 2.00 2.00 2.00 2.00 50 800 50 800
30
20
30
20
26
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
SKIRTINGS - TRANSITION AND STOPPING PROFILESScrew down | Self adhesive | Invisible tting trims proles trims | Joints covers | Access ramps | Doors stoppers | Profiles for stretched carpets Skirtings
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M
PRICE PER UNITE PCE. PACK MAXI-PACK
FLEXIBLE SKIRTINGS SUPPORTS LOW PRICE20 x 20 Soft PVC 30 x 30 18 18 18 18 06 06 06 06 00 00 10 10 3 3 2 2 2.00 2.00 2.00 2.00 50 800 50 800
30
20
30
20
CORNER SKIRTING SUPPORTSoft PVC 18 05 00 6 1
Moulding Floor covering Skirting support
Corner skirting support
www.dinac.com
|
|
Dinatheque 2009-2010
|
WP
27
In order to protect staircases, improve their look and make them more safety we have developped a wide range of stair nosing proles, anti slip inserts and accessories. They have been designed according to intended type of use : residential, medium duty, heavy duty. Products are proposed in different widths, materials and colours. They can be screwed down, embedded, glued down, xed via adhesive according to specic requirements. They cover any technical requirement and adapt to most nancial possibilities.
WAYS OF FITTING According to nosing prole type, different ways of tting are proposed : - SCREW DOWN FITTING : supplied countersunk drilled or punched. - GLUE DOWN FITTING : the right type of glue, adapted to support and prole should be used for sticking down on installation site. - SELF ADHESIVE FITTING : with factory tted Dinac BUTYL base adhesive. It is advised to heat up the support when xing the prole. - SIMULTANEOUS FITTING : the prole is xed while laying down the oor covering.
TYPE OF PROFILES - Bevelled edges for surface mounting : nosing proles with bevelled edge can be installed on any type of oor covering in case of new or renovated stair cases. - Straight edges for mounting ush to oor covering : prole selection according to thickness of oor covering.
CURVING All curves are carried out in the factory according to a site made template and a technical data sheet. In order to make sure that bent prole will t exactly, very precise information has to be provided. A bending data sheet which will help you to carry out the cutting of the template is at your disposal on request.
28
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
STAIR NOSING PROFILES
ISBA stair nosing proles Metallic grooved stair nosing Traditional stair nosing Extendable stair nosing ISBATEX stair nosing proles For soft oor coverings PVC stair nosing proles Adjustable stair nosing proles Stair nosing proles Deco Non slip proles Non slip inserts Curving Screws
30 32 34 35 36 38 40 41 42 43 44 46 48
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
29
STAIR NOSING PROFILES - ISBAISBA Metallic grooved | Traditional | Extendable | ISBATEX | For soft oor coverings | PVC | Adjustable | Deco | Non slip proles | Non slip inserts | CurvingPRODUCT NAME CODE CNUF 323356 KEY PRICE PER UNIT PCE. PACK SCREW CODE
Screws and plugs : see page 48 - 49
MATERIAL
FINISH
PACK
SURFACE MOUNTING - BEVELLED EDGE heavy duty - best of range Square step edge
Lenght of SN : 3 meters maximum B1 B11 BC1 F1 Brushed aluminium Black Brown Anodised alu Black silver Brown Black Polished brass Brown Black Brushed aluminium Brown 25 25 25 25 25 25 25 25 00 00 01 01 18 18 07 07 07 17 01 11 01 11 07 17 8 7 3 2 1 0 7 6 1 1 1 1 1 1 1 1 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20
ISBA stair nosing BC1
FLUSH MOUNTING Lenght of SN : 3 meters maximum heavy duty - best of range Black Square step edge - Straight edge 4 mm and 5,4 mm BrushedE2 aluminium C2 C1 C11 MC1 E1 D1 Brown Black Brushed aluminium Brown Black Brushed aluminium Brown Anodised alu Black silver Brown Black Polished brass Brown Black Brushed aluminium Brown Black Brushed aluminium Brown
25 25 25 25 25 25 25 25 25 25 25 25 25 25
10 10 09 09 04 04 05 05 06 06 08 08 11 11
07 17 07 17 07 17 01 11 01 11 07 17 07 17
7 6 1 0 6 5 1 0 8 7 4 3 4 3
1 1 1 1 1 1 1 1 1 1 1 1 1 1
39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20
Kinked face stepT1 M1 Brushed aluminium Black Brown Black Brushed aluminium Brown Black Brushed aluminium Brown Black Polished brass Brown 25 25 25 25 25 25 25 25 89 89 25 25 25 16 16 15 15 14 14 19 19 00 11 52 52 90 07 17 07 17 07 17 01 11 00 11 00 01 00 9 8 2 1 5 4 8 7 1 1 1 1 1 1 1 1 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20 39 19 20
Bullnose step
R1 LR1
Options for ISBA SNCenter standard : 225 mm
Special cut Drilling+capping supplied Cappings Special drill bit Flat cross head screw 3.5 x 30 mm Plug 5 x 25 mm Black Brown
39 19 20 39 60 00
1 1 3 1 8 1 bag of 100 cappings 5 0 1 1 box of 200 6 screws 1 box of 200 0 screws
ISBA stair nosing proles are designed for protecting stair edges and secure high trafc walking areas such as airports, shopping malls, hospitals, hotels... Suitable for both indoor and outdoor use. The ISBA insert is a brake lining type anti slip. Fusion insert bonding and countersunk drilling are carried out in our plant. Capping plugs are supplied to conceal screw heads after tting. Some models can be bent. ASK FOR MORE INFORMATION. 30 www.dinac.com
Capping plug Screw - Ref. 39 19 20
FITTING SKETCH ISBA SN
ISBA insertfusion bonded in factory
Stair nosing Plug - Ref. 39 60 00
F
Countersunk hole 3.5 mm
|
|
Dinatheque 2009-2010 WP
|
ISBA - STAIR
NOSING PROFILES61
ISBA Metallic grooved | Traditional | Extendable | ISBATEX | For soft oor coverings | PVC | Adjustable | Deco | Non slip proles | Non slip inserts | Curving
Drilling can be carried out by customer using specic drill bit ref. 25 90 00
F1
4
62,5
674 4 50
B1/ B11
BC127
52,5 5,4
87,5
E2 C1/ C11
4
29
87,5
29
C2
5,4
51,5 52,5
E14
4
52,5
MC1
29
5,4
D135
56 55
T1
4
LR1
56,5 5,4 54 40 5,4
4
50
28,5
30
M1
R151
Colour chart inserts ISBA(non contractual colours)
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
50
45
31
STAIR NOSING PROFILES - METALLIC GROOVEDISBA Metallic grooved Traditional | Extendable | ISBATEX | For soft oor coverings | PVC | Adjustable | Deco | Non slip proles | Non slip inserts | CurvingPRODUCT MATERIAL NAME CODE CNUF 323356 KEY LENGHT PACK M PRICE PER UNIT PCE. PACK MAXI-PACK SCREW CODE
Screws and plugs : see page 48 - 49
FINISH
FLUSH MOUNTING - heavy duty Square step edge7T supplied drilled without screw.
7T 8T
Aluminium Mill nish Aluminium Mill nish
22 09 40 22 02 40
7 8
3.00 3.00
10 10
39 19 00 39 19 00
Type 8T 7T 41V 6V 43V 7V 8V 5V
Nb. holes 8 8 16 16 15 16 16 16
Center mm 400 400 190 190 220 190 190 190
Same efciency when used in-and-outdoor. Anti slip and decorative solution.
Grooved metallic stair nosing 8T
FLUSH MOUNTING - medium duty Square step edgeSupplied drilled with screw.
41V 6V 43V
7V 8V
06 22 Anodised Silver 22 aluminium Silver 22 Gold 22 22 Anodised Gold 22 aluminium Champagne 22 Brass Polished 22 Silver
47 15 15 52 53 16 16 16 18
11 34 34 34 34 34 34 44 34
9 7 7 2 9 4 4 3 8
3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00
10 10 50 10 10 10 50 10 10
39 18 00 39 18 00 39 18 00 39 18 00 39 16 10 39 16 10 39 16 10 39 16 10 39 16 00
Grooved metallic stair nosing 41V
FLUSH MOUNTING - heavy duty Square step edge
B2 B3 60V
61V
Aluminium Mill nish St. steel 304 Mill nish Polished Brass Mill nish Aluminium Mill nish Polished Brass Mill nish Aluminium Mill nish
24 24 51 55 55 51 55 55
03 04 74 07 07 75 07 07
11 99 08 76 78 08 77 79
9 4 5 3 4 2 7 1
3.00 2.50 1.25 2.50 2.50 1.25 2.50
1 1 10 5 5 10 5 5
39 39 00 39 39 00
Grooved metallic stair nosing aluminium B2
Accessories for B2 and B3
Alu xing clamp St. steel screw + bolt for xing clamp Screw for wood + plastic plug
39 57 00 39 38 00 39 39 00
0
55
9 12 mm 55 6 30 mm 55
FLUSH MOUNTING
Screw + boltref. 39 38 00
SN B2 or B3 Fixing clampref. 39 57 00
Bullnose stepSupplied drilled without screws.
5V
Brass
Drilled
22 14 34
0
3.00
10
39 55 00
32
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
METALLIC GROOVED - STAIR
NOSING PROFILES
ISBA Metallic grooved Traditional | Extendable | ISBATEX | For soft oor coverings | PVC | Adjustable | Deco | Non slip proles | Non slip inserts | Curving
100
8T
3,6
F78
7T
3
F55
33
32
41V
F3
36
6V/7V 8V
3
F42
43V
2,5
50
18
Countersunk hole 3,8 mm
F
Punched hole 3,6 mm
P
23
20
12,5
55
60V
10
F
B3
4,5
44
St. steel 30420 40
61V
12,5
44
F55
F40
B2
3
3
26,5
5V
www.dinac.com
|
|
15
Dinatheque 2009-2010 WP
|
33
STAIR NOSING PROFILES -TRADITIONALISBA | Metallic grooved Traditional Extendable | ISBATEX | For soft oor coverings | PVC | Adjustable | Deco | Non slip proles | Non slip inserts | CurvingPRODUCT MATERIAL NAME CODE CNUF 323356 KEY LENGHT PACK M PRICE PER UNIT PCE. PACK MAXI-PACK SCREW CODE
Screws and plugs : see page 48 - 49
FINISH
FLUSH MOUNTING - medium dutySupplied with anthracite carbo insert, without screw. 3T Anodised alu silver 6T Butyl adhesive Drilled Butyl adhesive Drilled 06 06 06 06 23 23 24 24 11 11 11 11 3 3 0 0 9 6 3.00 3.00 3.00 3.00 3.00 3.00 10 20 10 20 10 10 39 19 00
39 19 00 39 19 00
06 63 11 06 64 11
3T stair nosing
FLUSH MOUNTING - medium dutySupplied with anthracite carbo insert, without screw. 1T Anodised alu silver Butyl adhesive Drilled 06 03 11 06 04 11 5 2 3.00 3.00 10 10 39 19 00
1T stair nosing
F 553T4
F6T4
75
F 551T4
32
32
FLUSH MOUNTING : oor covering is laid ush to channel backside
Type Traditional Evolutif
Nb. holes Center mm 16 190 16 190
1st hole 75 mm 75 mm
FLUSH MOUNTING : channel is installed on top of oor covering
34
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
32
EXTENDABLE - STAIRISBA | Metallic grooved | Traditional Extendable
NOSING PROFILESLENGHT PACK M PRICE PER UNIT PCE. PACK MAXI-PACK SCREW CODE
ISBATEX | For soft oor coverings | PVC | Adjustable | Deco | Non slip proles | Non slip inserts | Curving
Screws and plugs : see page 48 - 49 PRODUCT Non slip inserts : see page 44 - 45 NAME MATERIAL
FINISH
CODE CNUF 323356 KEY
FLUSH MOUNTING - medium duty Square step edge Supplied with anthracite carbo insert, without screw 2CBIS Square step edge Supplied without insert and screws.2CBIS
Drilled Anodised alu silver Drilled + adhesive Drilled
26 28 28 26 26
87 87 87 87 87
29 11 11 11 11
8 7 7 3 3 0 6 0
3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00
10 10 20 10 20 5 5 5
39 19 00 39 19 00 39 19 00 39 19 00 39 19 00 39 19 00 39 19 00 39 19 00
2C 20C
Polished brass Anodised alu silver
Drilled + adhesive Drilled Drilled
28 86 11 26 86 11 26 88 11
Evolutif stair nosing 2CBIS
FLUSH MOUNTING - medium duty Square step edgeSupplied without insert and screws. 1C except 26 01 29 supplied with anthracite carbo insert. Anodised alu silver
4C
3C Polished brass
15CEvolutif stair nosing 3C
Drilled Drilled + adhesive Drilled Drilled + adhesive Drilled Drilled + adhesive Drilled Drilled + adhesive Drilled
26 01 29 28 01 11 26 01 11 28 17 11 26 17 11 28 11 11 26 11 11 28 14 11 26 14 11
4 3 9 4 0 2 8 3 9
3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00
10 10 10 10 10 10 10 10 10
39 19 00 39 19 00 39 19 00 39 19 00 39 19 00 39 19 00 39 19 00 39 19 00 39 19 00
Bullnose stepSupplied without insert and screws.
6C
Anodised alu silver
Drilled + adhesive Drilled
28 30 11 26 30 11
3 9
3.00 3.00
10 10
39 19 00 39 19 00
ACCESSORIES Ramp edge adhesive Supplied without screws.11C Anodised alu silver Adhesive 28 63 11 1 3.00 10 39 19 00
P2CBIS 2C4,5
67 4,5
P1C
53,5
53,5
4,5
4,5
P
67
4C
P40
53 56
20C
Kinked face step Radius : 19 mm
3C 15C
4,5
P6C 11C4,5 4,5
61 41
RAMP EDGE allows installation of SN types : 1C, 3C, 4C, 6C and 15C on top of oor covering.
www.dinac.com
|
|
38
24,5
Dinatheque 2009-2010 WP
|
32
P
32
35
STAIR NOSING PROFILES - ISBATEXISBA | Metallic grooved | Traditional | Extendable ISBATEX For soft oor coverings | PVC | Adjustable | Deco | Non slip proles | Non slip inserts | CurvingCODE CNUF 323356 KEY PRICE PER UNIT PCE. PACK
PRODUCT NAME
MATERIAL
FINISH
PACK
SURFACE MOUNTING- medium duty Square step edge
Lenght of SN : 3 meters maximum Black insert Grey insert Non drilled , supplied with PVC insert. To be glued down on site. Blue insert Brushed XB1 Green insert aluminium Brown insert Red insert Yellow insert Black insert Grey insert Blue insert Anodised XB11 Green insert aluminium silver Brown insert ISBATEX XB1 stair nosing Red insert Yellow insert Black insert Grey insert Blue insert XBC1 Polished brass Green insert Brown insert Red insert Yellow insert Black insert Grey insert Blue insert Brushed XF1 Green insert aluminium Brown insert Red insert Yellow insert
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
00 00 00 00 00 00 00 01 01 01 01 01 01 01 18 18 18 18 18 18 18 07 07 07 07 07 07 07
70 71 72 73 74 76 75 70 71 72 73 74 76 75 70 71 72 73 74 76 75 70 71 72 73 74 76 75
2 9 6 3 0 4 7 9 6 3 0 7 1 4 7 4 1 8 5 9 2 1 8 5 2 9 3 6 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Options62,5
Special cut
89 00 00
67
XBC1
XB1/ XB11
4
4
Colour chart non slip inserts (non contractual colours) XF14
29
61
protecting stair edges and secure high trafc walking areas such as airport, shopping malls, hospitals, hotels... Suitable for both indoor and outdoor use. Non drilled SN proles to be glued down. Self adhesive PVC non slip insert supplied loose for tting on site.
36
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
50
ISBATEX stair nosing proles are designed for
27
ISBATEX - STAIR
NOSING PROFILESCODE CNUF 323356 KEY PRICE PER UNIT PCE. PACK
ISBA | Metallic grooved | Traditional | Extendable ISBATEX For soft oor coverings | PVC | Adjustable | Deco | Non slip proles | Non slip inserts | Curving
PRODUCT NAME
MATERIAL
FINISH
PACK
FLUSH MOUNTING - medium duty Square step edgeNon drilled , supplied with PVC insert.
ISBATEX XC1 stair nosing
Lenght of SN : 3 meters maximum Black insert Grey insert Blue insert Brushed XC1 Green insert aluminium Brown insert Red insert Yellow insert Black insert Grey insert Blue insert Anodised XC11 Green insert aluminium silver Brown insert Red insert Yellow insert Black insert Grey insert Blue insert XMC1 Polished brass Green insert Brown insert Red insert Yellow insert Black insert Grey insert Blue insert Brushed XE1 Green insert aluminium Brown insert Red insert Yellow insert Black insert Grey insert Blue insert Green insert Brown insert Red insert Yellow insert Black insert Grey insert Blue insert Green insert Brown insert Red insert Yellow insert
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
04 04 04 04 04 04 04 05 05 05 05 05 05 05 06 06 06 06 06 06 06 08 08 08 08 08 08 08 19 19 19 19 19 19 19 16 16 16 16 16 16 16
70 71 72 73 74 76 75 70 71 72 73 74 76 75 70 71 72 73 74 76 75 70 71 72 73 74 76 75 70 71 72 73 74 76 75 70 71 72 73 74 76 75
0 7 4 1 8 2 5 7 4 1 8 5 9 2 4 1 8 5 2 6 9 8 5 2 9 6 0 3 4 1 8 5 2 6 9 3 0 7 4 1 5 8 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 152,5
Bullnose stepNon drilled , supplied with PVC insert. XLR1 Polished brass
Kinked face step - RADIUS 19 mmNon drilled , supplied with PVC insert. XT1 Brushed aluminium
Options51,5
Special cut
89 00 00
XE1
XMC156
4
4 55 29
XT14 50
4
52,5 4
Radius : 19 mm
50
XC1/ XC11
www.dinac.com
|
|
29
40
XLR1
Dinatheque 2009-2010 WP
|
37
STAIR NOSING PROFILES - FOR SOFT FLOOR COVERINGSISBA | Metallic grooved | Traditional | Extendable | ISBATEX For soft oor coverings PVC | Adjustable | Deco | Non slip proles | Non slip inserts | CurvingPRODUCT NAME CODE CNUF 323356 KEY LENGHT PACK PRICE PER UNIT M PCE. PACK SCREW CODE
MATERIAL
FINISH
FLUSH MOUNTING - medium duty With PVC insertTo be screwed down. Supplied without screws and insert. 40V 42V Insert Anodised alu silver Anodised alu silver PVC Drilled Drilled Black 06 45 11 06 46 11 27 10 34 5 2 7 3.00 3.00 3.05 10 10 10 39 19 00 39 19 00
55 5Stair nosing 40V for soft oor coverings with PVC insert
F
40V50 F
3
42V
6
Nb. holes 16
Center 190
First hole 75 mm
Low priceTo be glued down. Non drilled. Supplied without inserts (Insert page 44).
34
AC1B AC3B ACL5B
Aluminium mill Non nish drilled
06 31 11 06 34 11 06 35 11
8 9 6
3.00 3.00 3.00
10 10 10
90
ACL5B Use glue suitable for oor covering and stair nosing.
3
55
AC3B
3
36
AC1B
3
38
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
24
24
36
50
FOR SOFT FLOOR COVERINGS - STAIR
NOSING PROFILESCODE CNUF 323356 KEY LENGHT PACK PRICE PER UNIT M PCE. PACK SCREW CODE
ISBA | Metallic grooved | Traditional | Extendable | ISBATEX For soft oor coverings PVC | Adjustable | Deco | Non slip proles | Non slip inserts | Curving
PRODUCT NAME
MATERIAL
FINISH
FLUSH MOUNTING - medium duty To be glued down
50V 51V 52V 53V
Anodised aluminium
Silver
Aluminium ano. Silver Brass Polished Anodised Silver
22 22 22 22 22
08 05 17 19 28
34 34 34 34 34
9 8 1 5 7
3.00 3.00 3.00 3.00 3.00
10 10 10 10 10
Stair nosing 50V for soft oor coverings with
38 9 3,5
42 9 9 9 3,5 2,5 45 12 12 12 6
50V
2,5
51V16
45
12
52V
4,9
53V18
6
4,9
TYPE
THICKNESS OF FLOORING 2.50 mm 3.50 mm 4.90 mm 6.00 mm Use glue suitable for oor covering and stair nosing.
50V 51V 52V 53V
AC1 Low price To be glued down. Non drilled. Supplied without inserts (page 44). ACL3
Aluminium mill Non nish drilled
06 30 11 06 33 11
1 2
3.00 3.00
10 10
28
48
AC1
ACL324
3
3
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
36
18
16
39
STAIR NOSING PROFILES - PVCISBA | Metallic grooved | Traditional | Extendable | ISBATEX | For soft oor coverings PVC Adjustable | Deco | Non slip proles | Non slip inserts | CurvingPRODUCT NAME CODE CNUF 323356 KEY LENGHT PACK M PRICE PER UNIT PCE. PACK MAXI-PACK
MATERIAL
FINISH
FLUSH MOUNTING - medium duty To be glued downNMDL PVC
Black Brown Grey Black Brown
Stair nosing white NMDR
NMDR
PVC Grey Yellow White
23 23 23 23 23 23 23 23 23 23 23 23 23 23
00 00 00 00 00 00 06 06 06 06 06 06 06 06
92 92 19 19 57 57 92 92 19 19 57 57 22 10
0 0 7 7 9 9 2 2 9 9 1 1 9 6
3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00
15 150 15 150 15 150 15 150 15 150 15 150 15 15
FLUSH MOUNTING - medium duty To be glued downNMDI PVC
NMCE Post lumi.
PVC
NMCStair nosing brown NMC
PVC
NMDB
PVC
POST LUMINESCENT : Stores light when exposed to ambient light and supplies light in case of darkness.
NMCC
PVC
NMRB
PVC
Black Brown Grey Black Brown Grey Black Brown Grey Yellow White Black Brown Grey Black Brown Grey Black Brown Grey
23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23
08 08 08 10 10 10 03 03 03 03 03 02 02 02 07 07 07 04 04 04
92 19 57 92 19 57 92 19 57 22 10 92 19 57 92 19 57 92 19 57
6 3 5 9 6 8 1 8 0 8 5 4 1 3 9 6 8 8 5 7
3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00
10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
2,5
65
28,5
63 22
NMDL
21
NMDR
NMRB
4
20 4
70 44 29
4 76
NMDI NMDB33
8
67 16 22 3,5 2,5 64
NMCE
2
NMCC
34
18
36,5
59
46
Scale 3/4
40
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
36
NMC
Never stick PVC stair nosing down part on step riser.
63,5
ADJUSTABLE - STAIR
NOSING PROFILES
ISBA | Metallic grooved | Traditional | Extendable | ISBATEX | For soft oor coverings | PVC Adjustable Deco | Non slip proles | Non slip inserts | Curving
Base part glued or screwed on the step. Leave expansion gap recommended by parquet manufacturer. BUTYL adh. allows expansion movements of parquet / laminate.
7 - 12
7 - 12
12 - 15
12 - 15
mini 7 mm
maxi 12 mm
mini 12 mm
maxi 15 mm
MATERIAL
FINISH
CODE CNUF 323356 KEY
LENGHT PACK PRICE PER UNIT M PCE. PACK
SCREW CODE
MEDIUM DUTY Stair nosing prole 25 x 2425Anodised aluminium
Brass
Silver Gold Champagne Titium Polished
22 22 22 22 22
20 21 21 22 70
09 09 29 09 09
9 6 4 3 4
2.70 2.70 2.70 2.70 2.70
10 10 10 10 10
STAIR NOSING PROFILE Stair nosing prole 25 x 2425
24
Plated aluminium
Cereja Clear oak Rustical oak Exotica Fruita Beech Walnut Special colours
47 47 47 47 47 47 47 47
48 48 40 43 48 41 48 49
29 69 09 09 49 09 79 88
4 0 0 1 2 7 9 8
2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70
5 5 5 5 5 5 5 5
24
For private residential use only.
Stair nosing aluminium silver
For heigths from 7 to 12 mm For heigths from 12 to 15 mmCenter : 212 mm, 12 trous, First hole 78 mm
Aluminium Aluminium
Mill nish Mill nish
22 72 19 22 76 19
8 6
2.70 2.70
5 5 First hole 78 mm
39 19 00 39 19 00
12,5
7,5
F40
F40Steel Brass plated
Nbre trous Center 12 212
STAIR RODS 14 MM Tube 3 mTip
73 00 00
0
3.00
5
Bracket Brass plated stair rod
Tube 0.70 mSupplied with tips and brackets.
Steel Steel Brass Brass
Brass plated Brass plated Polished Polished
73 70 00 73 80 00 73 02 00 73 01 00
3 2 4 7
0.70 0.80
5 5
Tube 0.80 mSupplied with tips and brackets.
Tip for tube 3 m Bracket for tube 3 m
1 box of 50 pce. 1 box of 50 pce.
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
41
STAIR NOSING PROFILES - DECOISBA | Metallic grooved | Traditional | Extendable | ISBATEX | For soft oor coverings | PVC | Adjustable Deco Non slip proles | Non slip inserts | CurvingScrews and plugs : see page 48 - 49 PRODUCT MATERIAL NAME CODE CNUF 323356 KEY LENGHT PACK M PRICE PER UNIT PCE. PACK MAXI-PACK SCREW CODE
FINISH
SURFACE MOUNTING - Stair nosing prole AluSupplied drilled without screws. 9V
10V
Silver Anodised Gold aluminium Champagne Titium Silver Anodised Gold aluminium Champagne Titium
12VStair nosing aluminium anodised gold 10V
22 22 22 22 22 22 22 22 22 Anodised Silver 22 aluminium Gold polish. 22
40 41 41 42 45 46 46 47 38 38 39
09 09 29 09 09 09 29 09 34 34 34
7 4 2 1 2 9 7 6 6 6 3
2.70 2.70 2.70 2.70 2.70 2.70 2.70 2.70 3.00 3.00 3.00
10 10 10 10 10 10 10 10 10 50 10
39 86 50 39 87 50 39 87 50 39 85 50 39 86 50 39 87 50 39 87 50 39 85 50 39 19 00 39 19 00 39 19 00
F25
F25
F38,5Type Nb. holes 15 15 16 Center mm 180 180 190 First hole 120 mm 120 mm 75 mm
10
9V HDF + PVC base from 7 to 11 mm
10 V
12 V
9V 10V 12V
HDF
Oak Beech Maple Exotica Oak Beech Maple Exotica
84 84 84 84 84 84 84 84
46 46 46 46 48 48 48 48
04 14 24 34 04 14 24 34
2 1 0 9 6 5 4 3
19,51.35 1.35 1.35 1.35 1.35 1.35 1.35 1.35
20
5 5 5 5 5 5 5 5 65
HDF + PVC base from 13 to 17 mmHDF
65
7 10 m lgth. > 50 m lgth. > 100 m
CURVING PER METER Stair nosing prole B1 + black ISBA insert Aluminium Brushed Stair nosing prole B11 with black ISBA insert67 4Anodised Silver aluminium
25 00 87 25 01 87
0
800 1000
7 1500 1100
RMP 1-4,5 ramp
2720 58 87 20 59 87 20 59 97
Silver Anodised Gold aluminium Champagne
6 3400 800 3 3400 950 2 3400 950
30 6,5 4,5
65
RMP 4-8 ramp
Anodised Silver aluminium
20 74 87
6 1500 950
10
8
50
Reinf. cover trim 40 mm to be scr. down4,5
40
Silver Anodised Gold aluminium Champagne Titium
20 20 20 20
48 67 67 68
87 87 97 87
7 8 7 5
1000 1000 1000 1000
1000 1000 1000 1000
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
47
SCREWSCODE CNUF 323356 KEY PRICE PER UNIT PCE. PACK
MATERIAL
DIMENSIONS
PACK
CROSS HEAD SCREW Flat head screw
Brass coated steel Zinc plated white steel St. steel Zinc plated white steel Zinc plated black steel Zinc plated white steel Zinc plated gold/ champ. steel Aluminium Zinc plated titium steel
3x25 3.5x30 3.5x30 4.8x38 4x50 3.5x35 3x12 3x12 3x25 3x12 3x25 3x25
39 39 39 04 39 39 39 39 39 39 39 39
56 01 19 63 53 19 85 86 87 87 86 85
00 20 00 00 00 20 00 00 50 00 50 50
3 * 1 * 8 9 * 2 * 6 1 box of 200 screws 3 0 * 2 7 5 * 8
Rounded head screwBag of 30 screws have to be ordered by multiple of 10 Nickel coated steel
Brass coated steel
Zinc pl. black
3.5x35 3.5x30 3.5x25 3.5x25 3.5x35 3.5x30 3.5x25 3.5x25 3.5x25
39 39 39 39 39 39 39 39 39
34 15 22 22 55 16 23 23 74
55 00 55 56 55 00 55 56 00
* 1 0 1 box of 200 screws * 8 * 5 10 bags of 30 scr. 6 * 7 1 box of 200 screws * 5 * 2 10 bags of 30 scr. 7 1 box of 200 screws
Zinc pl. gold/champ. 3.5x30 Aluminium Zinc pl. titium steel 3.5x30 3.5x30
39 16 10 * 6 39 18 00 1 39 16 20 * 5
SLOT HEAD SCREW Rounded head screwNickel coated steel
Brass coated steel
3.5x35 3.5x30 3.5x25 3.5x35 3.5x30 3.5x25
39 39 39 39 39 39
34 20 22 55 21 23
00 * 1 00 4 00 * 8 1 box of 200 screws 00 6 00 1 00 * 5
NAIL-SCREWSSupplied with plug Zinc plated steel 6x40 8x45 04 70 00 39 45 00 1 box of 100 screws + plugs 1 box of 50 screws 7 + plugs 7
PLUGS5x25 5 mm Nylon 6x30 8x40 39 60 00 04 64 30 04 64 40 0 3 2 1 box of 200 plugs 1 box of 100 plugs
6/8 mm
48
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
SCREWSCODE CNUF 323356 KEY PRICE PER UNIT PCE. PACK
MATERIAL
DIMENSIONS
PACK
SCREWS - BOLTS - NUTS Screw + stainless steel nut 6 x 12 mm
Stainless steel
6x12
39 38 00
9
1 box of 55 pieces
Screw 5.5 x 38 + plug 8 x 40 mm
Stainless steel
5.5x38 + 8x40
39 39 00
6
1 box of 55 pieces
Bolt 8 x 50 mm
Stainless steel
8x50
04 62 00
2
1 box of 50 pieces
Zinc plated bolt ated
Stainless steel
8x15
04 68 00
4 1 box of 100 pieces
TAP DOWN NAIL-SCREW With plug 55 mm With plug 41 mm
Bichromated steel Bichromated steel
39 37 01 39 13 01
9 1 box of 120 pieces 3 1 box of 120 pieces
With Harmony plug DOUBLE STOREY DRILL BIT . 6 mm + drill bit
Bichromated steel
39 13 05
1
1 box of 5 pieces
39 50 10
0
1
STANDARD DRILL BIT FOR DRILL 5 mm 6 mm 7 mm 8 mm 10 mm 39 39 39 39 39 00 00 00 00 00 01 02 07 03 08 3 0 5 7 2
10
SDS DRILL BIT FOR HOLE PUNCHER 5 mm 6 mm 7 mm 8 mm 10 mm 12 mmNon contractual photo
39 39 39 39 39 39
00 00 00 00 00 00
04 05 10 06 11 12
4 1 5 8 2 9
1
*This packings suitable for display stands
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
49
In places opened to public these protection proles will protect wall areas exposed to shocks and deterioration. Some of the proles are available in AISI 304 stainless steel - they are in accordance whith food industry standards.
50
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
PROTECTION PROFILES
Wall corner guards Protection plates Wall protections Handrails
52 55 56 57
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
51
PROTECTION PROFILES - WALL CORNER GUARDSWall corner guards Protection plates | Wall protections | Handrails
Corner guard adh. st. steel 50x50 mm glazed
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGHT
M
PACK
PRICE PER UNIT PCE. PACK
SCREW CODE
METALLIC CORNER GUARD FOR OUTER ANGLE BUTYL adhesive 10 x 20 - 10 x 20 mm Aluminiumanodised
Silver
13 20 16 13 20 10 13 23 16 13 23 10 13 24 16 13 24 10 13 30 16 13 30 10 13 31 16 13 31 10 13 01 16 13 01 06 13 01 10 13 05 16 13 05 06 13 05 10 13 04 16 13 04 10 13 06 16 13 06 10 13 13 10 13 19 10 13 50 16 13 50 10 13 11 16 13 11 06 13 11 10 13 15 16 13 15 06 13 15 10 13 14 16 13 14 10 13 16 16 13 16 10 39 28 25 39 65 25 39 67 25 39 28 30 39 28 40 39 29 50 39 66 50 39 68 50
5 3 6 4 3 1 4 2 1 9 4 5 2 2 3 0 5 3 9 7 5 7 2 0 3 4 1 1 2 9 4 2 8 6 3 8 2 7 6 2 7 1
1.50 3.00 1.50 3.00 1.50 3.00 1.50 3.00 1.50 3.00 1.50 2.00 3.00 1.50 2.00 3.00 1.50 3.00 1.50 3.00 3.00 3.00 1.50 3.00 1.50 2.00 3.00 1.50 2.00 3.00 1.50 3.00 1.50 3.00
20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
20 x 20 - 20 x 20 mmAluminium anodised
Silver Gold
25 x 25 - 25 x 25 mmAuminium anodised
Silver Gold Bright 430
25 x 25 - 26 x 26 mmSt. steel
Glazed 304
PVC c PVC brown Coated steel PVC white PVC white
30 x 30 - 31 x 31 mm 40 x 40 - 41 x 41 mm 50 x 50 - 54 x 54 mm 50 x 50 - 51 x 51 mm
St. steel St. steel Aluminium anodised
Glazed 304 Glazed 304 Silver
Bright 430 St. steel Glazed 304
PVC brown Coated steel PVC white
ACCESSORIES FOR MTALLIC CORNER GUARDS End caps 25 x 25PVC
Black Beige Grey Black Black Black Beige Grey
1 bag of 10 end caps 1 bag of 10 end caps 1 bag of 10 end caps 1 bag of 10 end caps
End caps 30 x 30 End caps 40 x 40 End caps 50 x 50
PVC PVC PVC PVC PVC
52
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
WALL CORNER GUARDS - PROTECTIONWall corner guards Protection plates | Wall protections | Handrails
PROFILES
20
20
26
10 x 20 Aluminium anodised10
20 x 2020
25 x 25 St. steel or coated steel
Aluminium anodised
25
31
41
25 x 25 Aluminium anodised
30 x 30 St. steel25 31
40 x 40 St. steel41
51
54
50 x 50 St. steel or coated steel
50 x 50 Aluminium anodised
51
26
PROTECTION : Shocks are absorbed by BUTYL adhesive masses which act like a schock absorber. TAYLOR MADE PROFILES : We can supply any custom made size or dimension in stainless steel and plated steel. Custom made brass products : on request. End caps for alu and stainless steel corner guards. No suitable for anti shock corner guards.
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
54
53
PROTECTION PROFILES - WALL CORNER GUARDSWall corner guards Protection plates | Wall protections | Handrails
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGHT
M
PACK
PRICE PER UNIT PCE. PACK
SCREW CODE
PVC SHOCKPROOF FOR OUTER ANGLE 57 x 57 mm57
BUTYL adhesive Brown PVC vinyl Beige shockproof Grey
13 64 10 13 65 10 13 66 10
7 4 1
3.00 3.00 3.00
10 10 10
57
Corner guard adh. PVC 57 x 57 mm - beige
FIXED IN CORNER GUARDS
Other xed in corner guards (stainless steel) are available. Drawings and codes can be found on page 121 (in ceramic tiles proles range).
Shockproof function : PVC resisting to medium shocks. Shocks resistance at 23 C : - pulling test : 700 kj/m - izod test : 14 kj/m Flame resistance : UL 94 = VO
54
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
PROTECTION PLATES - PROTECTIONWall corner guards Protection plates Wall protections | Handrails
PROFILESPRICE PER UNIT PCE. PACK SCREW CODE
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGHT
M
PACK
STAINLESS STEEL PLATES BUTYL adhesive Non adhesive
Thickness : 10/10 mm - Maximum size per plate : 1000 x 2000 mm Bright 430 17 51 99 0 1m2 1 Sainless steel Glazed 304 17 54 99 1 1m2 1 Stainless steel Bright 430 Glazed 304 17 51 98 17 54 98 3 4 1m2 1m2 1 1
Option A (to be indicated when ordering) 4 bevelled edges per plate
Option B (to be indicated when ordering) 3 bevelled egdes + 1 edge with 10 mm lip to door frame
Adhesive stainless steel door plates are supplied cut to your dimensions ready for tting. The high performance BUTYL base adhesive is formulated manufactured and applied by DINAC. It is strongly advised to proceed to an adhesion test on nal support prior to tting. It is further advised to apply a primer and pre heat the support.
HYPERSHOCK POLYCARBONATE PROTEC. PLATES Adhesive DF PE foam
Thickness : 20/10 mm - Maximum size per plate : 1220 x 2440 mm 1 White RAL 9016 17 84 98 1 1m2 With 4 1 Beige RAL 1901 17 64 98 3 1m2 bevelled edges Clear grey RAL 7904 17 74 98 2 1m2 1 1 White RAL 9016 17 84 96 7 1m2 No bevelled 1 Beige RAL 1901 17 64 96 9 1m2 edges Clear grey RAL 7904 17 74 96 8 1m2 1 With 4 bevelled edges White RAL 9016 Beige RAL 1901 Clear grey RAL 7904 White RAL 9016 No bevelled Beige RAL 1901 edges Clear grey RAL 7904 17 84 97 17 64 97 17 74 97 17 84 99 17 64 99 17 74 99 4 6 5 8 0 9 1m2 1m2 1m2 1m2 1m2 1m2 1 1 1 1 1 1
Non adhesive
ACCESSORIES FOR POLYC. PROTECTIVE PLATES Roll 25 mm PE double sided foam
39 58 33
5
33.00
1
Easy maintenance with current products. For glueing down use traditional contact glues (follow glue manufacturer instructions). Plates can be supplied to nal shape with bevelled edges.
M1 re rating. Shockproof IZOD : +23 C : 47 kj/m -30 C : 12 kj/ m
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
55
PROTECTION PROFILES - WALL PROTECTIONSWall corner guards | Protection plates Wall protections Handrails
F
Adhesive
Body semi rigid Shock absorber
83
WP with top and bottom tting mouldings
Receptable for end cap
152
Lips : exible
- Body : PVC semi rigid - Lips : PVC exible - Shock absorbers : granite like surface
8
overlapping prole surface anti shock strips and mass BUTYL adhesive absorb shocks and reduce noice transmission.- End caps : for perfect nish of ends.
RAL CODES : Brown RAL 8014 Beige RAL 1013 Grey RAL 7035 White RAL 9010
8Screws and plugs : see page 48 -49
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGHT
M
PACK
PRICE PER UNIT PCE. PACK
SCREW CODE
PROTECTION PROFILES 80 Adhesive protection - width 83 mm End cap for protection - 83 mmSupplied with 10 end caps boxes.
Order top and bottom tting mouldings together wit proles Brown/beige 17 08 06 2 2.00 10 Grey/white 17 10 06 5 2.00 10 PVC Brown Grey Brown Grey PVC Brown Grey 39 11 00 39 46 00 17 00 10 17 01 10 17 02 00 17 03 00 2 4 3 0 8 5 3.00 3.00 1 1 10 10 1 1 39 19 00
Fitting mouldingSupplied drilled without screws.
End cap for tting mouldingSupplied with 20 end caps boxes.
PROTECTION PROFILES 150 Adhesive protection - width 152 mm End cap for protection 152 mmSupplied with 10 end caps boxes.
Order top and bottom tting mouldings together wit proles Brown/beige 17 15 06 0 2.00 5 Grey/white 17 17 06 4 2.00 5 PVC Brown Grey Brown Grey PVC Brown Grey 39 12 00 39 47 00 17 00 10 17 01 10 17 02 00 17 03 00 9 1 3 0 8 5 3.00 3.00 1 1 10 10 1 1 39 19 00
Fitting mouldingSupplied drilled without screws.
End cap for tting mouldingSupplied with 40 end caps boxes (20 right + 20 left).
56
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
HANDRAILS - PROTECTIONWall corner guards | Protection plates | Wall protections Handrails
PROFILES
Brackets are supplied with screws. One bracket per linear meter + one at each end. For good product holding, brackets ttings have to be installed.
99
45
MC 45
MC 45 E
- Set rail in position on bracket. - Drill rail using a 5 mm drill bit. - Fit rivets using a rivet plier.
160
Scale 1/4104
94
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGHT
M
PACK
PRICE PER UNIT PCE. PACK
SCREW CODE
MOUNTING BRACKETS ALUMINIUM MC 45 MC 45Supplied drilled with screws.
Aluminium anodised PVC
Silver Gold Brown Black
42 40 00 42 41 00 42 49 11 42 49 10
2 9 1 4
1 1 1 1
Garniture MC 45Fittings are compulsory for assembling the bracket.
Rail 45 mm End cap for rail
Aluminium anodised
Silver Gold Brown Black
42 10 10 42 11 10 42 37 00 42 37 10
4 1 2 1
1 1 1 1
MOUNTING BRACKETS ALUMINIUM MC 45 E MC 45 ESupplied drilled with screw TH6 X 35 and plugs R8.
Aluminium anodised Aluminium anodised
Silver Gold Silver Gold Brown Black
42 50 00 42 51 00 42 10 10 42 11 10 42 37 00 42 37 10
1 8 4 1 2 1 3.00 3.00
1 1 1 1 1 1
Rail 45 mmSupplied non drilled with reivets rail 4,8 mm.
End cap for rail ACCESSORIES Angle section for rail
PVC
Brown Black
42 27 00 42 27 10
3 2
1 1
Left or right wall section for rail
PVC
Brown Black
42 20 00 42 20 10
4 3
1 1
Junction sleeve for rail
PVC
42 60 00
0
1
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
57
An expansion joint is an opening within a structure at predertermined locations, designed to absorb movements of the structure. Those movements have different origins : thermal (caused by temperature changes within the structure), seismic (caused by earthquake activity beneath the structure), wind (high winds forcing the structure to sway).
We have developed a range covering any installation situation : ON FLOOR (oor to oor) : Pre set joint assemblies for : Heavy loads Light and medium loads Joint components for : Heavy loads Light and medium loads ON WALL, CEILING AND ANGULAR INSTALLATION (oor/ wall, wall/ wall...)
A wide movement / heavy loads range is also available. An exhaustive range of accessories makes joint installation easy (spacers, clamps ...) and protects joint assembly vs. humidity (watertighting strip) and re (re barrier).
FOR FURTHER INFORMATION, KINDLY REFER TO OUR SPECIFIC EXPANSION JOINTS CATALOGUE.
58
www.dinac.com
|
|
Dinatheque 2009-2010 WP
|
EXPANSION JOINTS COVER SYSTEMS
Expansion joints systems assemblies heavy duty Components for expansion joints systems heavy duty Expansion joints systems assemblies light and medium duty Components for expansion joints systems light and medium duty Components for expansion joints systems wide gaps Joint cover Accessories
62 64 66 69 74 76 77
www.dinac.com
|
|
Dinatheque 2009-2010
| WP
59
SELECT A JOINT COVER SYSTEMFloor Wall Ceiling Angle
Localisation
Light loading
... medium
... heavy
Parking
Wide mouvement
UseConcerns only oor to oor applications
Flush mounting
Surface mounting
Ways of mounting
B L C H H
A = size of expansion - joint opening B = sight line C = width of seaf H = height of frame L = width of frame footL
Dimensions
A
Expansion
Compression
Vertical unevenness
Shear
Movements
4 types for sealsSmooth seals without ooring with ooring Grooved seals Seal reference :C /E 40/0
Width Thickness of ooring E 3 mm = vinyl ooring... 5 mm = textile ooring... 8 mm = sports ooring or tiling...
Select the seal
4 RAL colours
Black 9005
Brown 8014
Grey 7035
Beige 1013
TECHNICAL INFORMATIONS
Select criterias : - select a standard cover system supplied with all components (frames, seal ans accessories) - or build up your own system order separately each component : frames, seal and accessories required for installation
Use on oor conditionsThe selection of a oor system will depend on the loading it will be subject to and on the criterias of the project specications.
Light and medium loadingPedestrian trafc Hand operated trolleys Areas of use : schools, ofce building, hospitals...
Heavy loading
Parking
Forklifts, vehicular trafc... Areas of use : car parks, storage areas, airports...
Wide movementsMulti directional movements Areas of use : specially adapted for seismic risk areas
Seal4 available colours Smooth or grooved nish complying with specic technical and/or aesthetical requirements Shore hardness : 60A
Full metal joint cover systems- sliding joint systems (for horizontal movement)
Specially designed to whistand heavy loading. All components are metal : - sliding and pivoting joint systems (for horizontal and vertical movement)
EXP. JOINTS COVER SYSTEMS - HEAVY DUTYHeavy duty Components heavy duty | Light and medium duty | Components light and medium duty | Components wide gaps | Joint cover | Accessories
TGV and TTM joint cover systems are supplied loose.
Accessories : see page 77
MATERIAL
COLOUR
CODE CNUF 323356 KEY
LENGTH PACK M.
PRICE PER UNIT PCE PACK
"TGV" JOINT COVER SYSTEM - floor/floor J20 for heavy duty244
Brass
Polished
03 75 60
9
2.50
1
21,5
20
25
154
25Aluminium Mill nish 03 75 50 0 3.00 1
J17
5010
40
38
50
3310
50
J19
Brass and aluminium
Mill nish
03 75 51
7
3.00
1
567
55 20 mm
PVC
Black
04 85 20
9
50.00
1
34/40 mmSize of opening 21 > 28 mm
PVC
Black
04 85 30
8
25.00
1
42/45 mmSize of opening 26 > 34 mm
PVC
Black
04 85 40
7
25.00
1
63/70 mmSize of opening 35 > 55 mm
PVC
Black
04 85 50
6
25.00
1
83/90 mmSize of opening 60 > 72 mm Length Largeur
PVC
Black
04 85 60
5
25.00
1
Grey and beige colour, please co