ROPERCORPORATION

ASSETS FORMERLY OF:

ROPERCORPORATIONSTAMPINGFACILITY

11:00 AMTUESDAY

SEPTEMBER 24TH

11:00 AMTUESDAY

SEPTEMBER 24TH

INSPECTION: MONDAY, SEPTEMBER 23RD,9 AM-4 PM & MORNING OF SALE

11:00 AMTUESDAY

OCTOBER 1ST

11:00 AMTUESDAY

OCTOBER 1ST

INSPECTION: MONDAY, SEPTEMBER 30TH,9 AM-4 PM & MORNING OF SALE

100 MANUFACTURERS DR.CHATTANOOGA, TN

11886 COUNTY ROAD 42TECUMSEH (WINDSOR),

ONT., CANADA

EDGEWINDSALES & MFG.

EDGEWINDSALES & MFG.

#2

STAMPINGFACILITY

biditup!An Industrial Assets, Inc. Company

8600 Chemin Darnley Rd.Montreal, Quebec, Canada

Sale In Conjunction with:Sale Conducted By: 11426 Ventura Blvd., Studio City, CAP: 818.508.7034 F: 818.508.3025www.biditup.comemail: info@biditup.com

#1

2

ROPER CORPORATIONASSETS FORMERLY OF: ROPER CORPORATIONSTAMPING FACILITY

11:00 AM, TUESDAY, SEPTEMBER 24TH11:00 AM, TUESDAY, SEPTEMBER 24TH

100 MANUFACTURERS DR., CHATTANOOGA, TN#1

SSDC PRESSES

22

(4) 400-T VERSON 4-Point, Mdl. S4-400, Bed 60” x 108”, Str 18”,SPM 15, T-Slotted Slide & Bolster 8” Thick, Air Clutch, Air Cushions, S/N17225, 17226, 17227 & 17228.400-T VERSON, Mdl. C2-400, Bed 60” x 108”, Str. 16”, SPM 10, T-Slotted Slide & Bolster 8” Thick, Air Clutch, Air Cushions, LINK SS-501Control & Light Curtain, Windows 35 1/2”, S/N 19581350-T CLEARING, Mdl. F-2350-108, Bed 60” x 108”, Str 16”, SPM10, T-slotted Slide & Bolster 8” Thick, Air Clutch, Air Cushions, LINKSS-501 Control, S/N 45-11421.(2) 350-T CLEARING 4-Point, Mdl. F-4350-84, Bed 72” x 84”, Str.16”, SPM 15, T-slotted Slide & Bolster 6 1/2” Thick & 7” Thick, Air Clutch,LINK SS-501 Control, Windows 31 1/2”, S/N 46-11751 & N/A.350-T BLISS, Bed 50” x 84”, Str. 10”, SPM 16, T-Slotted Bolster 5 1/2” Thick, Air Clutch, Windows 16”, Link Light Curtain, S/N 125166.1977 300-T VERSON, Mdl. S2-300, Bed 54” x 96”, Str 12”, SPM 30,T-Slotted Bolster 7 1/2” Thick, Air Clutch, Air Cushions, Link SS-501Controls, Windows 38”, S/N 25412.1974 300-T VERSON, Mdl. SS2-300, Bed 60” x 84”, Str 12”, SPM30-60 Variable, T-Slotted Slide & Bolster 6” Thick, Air Clutch, Windows 40”,Link Light Curtain, S/N 24026.(2) 250-T VERSON, Mdl. 250-C2-84, Bed 42” X 84”, Str 8”, SPM 30,T-Slotted Slide & Bolster 4” Thick, Air Clutch, Air Cushions, Link SS-501Control, Windows 20”, Floor Standing, S/N 17525 & 17526.(5) 250-T CLEARING, Mdl. F-2250-84, Bed 54” X 84”, Str 14”, SPM17, T-Slotted Slide & Bolster 6” Thick, Air Clutch, Air Cushions, Link SS501Control & Light Curtain, S/N 47-18146P, 47-13355P, 47-13655P, N/A.

200-T CLEARING, Mdl. F-2250-72, Bed 52” X 72”, Str 16”, SPM 19,T-Slotted Slide & Bolster 5” Thick, Air Clutch, S/N 46-11753P.(2) 200-T WARCO, Mdl. 200-2-72, Bed 52” X 72”, Str 12”, SPM 17,T-Slotted Slide & Bolster 4 1/2” Thick & 7” Thick, Air Clutch, Windows 18”,Floor Standing, S/N 47575 & N/A.(2) 160-T MINSTER, Mdl. 50-6 1/2-84, Bed 55” X 84”, Str 12, SPM22, T-Slotted Slide & Bolster 6” Thick, Air Clutch, Air Cushions, Link SS-501Control, Windows 14 1/2”, Floor Standing, S/N 5510 & 5511.150-T CLEARING, Mdl. S2-150, Bed 42” X 60”, Str 8”, SPM 35, T-Slotted Slide & Bolster 4” Thick, Air Clutch, Windows 18”, S/N 51-1080.150-T CLEARING, Mdl. S-2150-60T, Bed 48” X 60”, Str 9 1/2”,SPM 30, T-Slotted Slide & Bolster 5” Thick, Air Clutch, Air Cushions, S/N 51-15060.135-T NIAGARA, Mdl. 69D, Bed 39” X 60”, Str 8”, SPM 33, BolsterPlate 3 1/2” Thick, Air Clutch, Windows 13 1/2”, S/N 17843.125-T NIAGARA, Mdl. SC2-125, Bed 48” X 60”, Str 12”, SPM 35, T-Slotted Slide & Bolster 6” Thick, Air Clutch, Windows 20”, S/N 46318.125-T CLEARING, Mdl. S-2150, Bed 48” X 60”, Str 9 1/2”, SPM 30, AirClutch, S/N 51-15060.125-T NIAGARA, Mdl. SC2-125, Bed 42” X 60”, Str 12”, SPM 20, T-SlottedSlide & Bolster 5” Thick, Air Clutch, Air Cushion, Windows 15”, S/N 41112.(2) 125-T VERSON, Mdl. 125-S2-60, Bed 42” X 60”, Str 10”, SPM 30,T-Slotted Bolster 5” Thick, Air Clutch, Link Brake Monitor & Light Curtain,S/N 6783 & 6841.(2) 87-T VERSON, Mdl. 548, Bed 34” X 48”, Str 5”, SPM 21, BolsterPlate 4” Thick, Air Clutch, S/N 6776 & 6833.

CLEARING 350-T 4-Pt. Press, Mdl. F4-350-84

1 OF 4

VERSON 400-T 4-Pt. Press, Mdl. S4-400

33

2 AVAILABLEMINSTER 160-Ton SSDC Press,

Mdl. 50-6 1/2-84NIAGARA 225-T DC Gap Frame Press,

Mdl. S2G-225

VERSON 87-Ton SSDC Press, Mdl 548

VERSON 300-T SSDC Press, Mdl. SS2-300

NIAGARA 125-Ton SSDC PressMdl. S2150

NIAGARA 125-Ton SSDC PressMdl. SC2-125

2 AVAILABLE

MINSTER 160-Ton SSDC Press, Mdl. 50-6 1/2-84

VERSON 300-T SSDC Press,Mdl. S2-300 CLEARING 250-T SSDC Press, Mdl. F-2250-84

1 OF 5

VERSON 250-Ton SSDC Press,Mdl. 250-C2-84

2 AVAILABLE

VERSON 250-Ton SSDC Press, Mdl. 250-C2-84

2 AVAILABLE

1974 225-T NIAGARA Double Crank, Mdl. S2G-225, Bed 33”X 84”, Str 16”, SPM 30, T-Slotted Slide & Bolster 4 1/2” Thick, Air Clutch,Air Counterbalance, Air Cushion, S/N 48513.(2) 200-T USI CLEARING, Mdl. 200, Bed 35” X 54”, Str 8”, SPM40, T-Slotted Bolster 5” Thick, Link Brake Monitor & Light Curtain, AirClutch, Air Counterbalance, Air Cushion, S/N 54-2247 & 54-2263.150-T USI CLEARING, Mdl. 150, Bed 34” X 44”, Str 6”, SPM 60, T-Slotted Bolster 4 1/2” Thick, Air Clutch, Air Counterbalance, S/N 54-5217.150-T NIAGARA, Mdl. M150, Bed 30” X 50”, Str 8”, SPM 45, T-Slotted Bolster 5” Thick, Air Clutch, Air Counterbalance, Air Cushion,Link Brake Monitor & Light Curtain, S/N 42007.150-T VERSON, Mdl. 150, Bed 30” X 50”, Str 6”, SPM 45, T-SlottedFlanged Ram & Bolster 4 1/2” Thick, Air Clutch, Air Counterbalance,S/N 23579.110-T CLEVELAND, Mdl. 11-I-110, Bed 32” X 36”, Str 6”, SPM 40, T-Slotted Slide & Bolster 4” Thick, Air Clutch, Air Counterbalance, S/N 10795.105-T VERSON, Mdl. 7 1/2, Bed 30” X 39”, Str 6”, SPM 30, Bolster 4”Thick, Air Clutch, Air Cushion, Link Brake Monitor & Light Curtain, S/N 6685.100-T CLEARING Double Crank, Mdl. DG-4572, Adjustable Bed19” X 84”, Str 5”, SPM 40, Air Clutch, Air Counterbalance, S/N 47-12960.90-T USI CLEARING, Mdl. 90, Bed 27” X 38”, Str 6”, SPM 45,Bolster 3” Thick, Air Clutch, S/N 54-2146.1975 75-T MINSTER, Mdl. 7, Str 4”, SPM 75-150 Variable, T-Slotted Flanged Ram & Bolster 3 1/2” Thick, Air Clutch, AirCounterbalance, S/N 18901.1977 60-T BLISS, Mdl. C-60, Bed 21” X 32”, Str 4”, SPM 45, T-Slotted Bolster 3” Thick, Air Clutch, Air Counterbalances, S/N H67983.(3) 1977 60-T NIAGARA, Mdl. M-60, Bed 21” X 32”, Str 5”, SPM100, T-Slotted Bolster 3” Thick, Air Clutch & Brake, Air Counterbalance,S/N 49441, 49442 & 49444.

OBI/GAP FRAME PRESSES

4

USI CLEARING 150-Ton OBI Press, Mdl. 150

CLEVELAND 110-Ton OBI Press, Mdl. 11-I-110

VERSON 150-T OBI Press, Mdl. 150

5

BLISS 60-Ton OBI Press, Mdl. C-60NIAGARA 60-Ton OBI Press, Mdl. M-60MINSTER 75-Ton OBI Press, Mdl. 7

1975

3 AVAILABLE

CLEARING 100-T DC Gap Frame Press, Mdl. DG-4572 USI CLEARING 90-T OBI Press, Mdl. 90

19771977

6

20,000 Lb. ROWE - Cap. 40” WideX .020” - .110” Thickness, Reel Mdl.20040 Ds/J, Width 40”, ID 19” – 241/2”, OD 60”, Motorized Expansion,Coil Car – Mdl. BGY20, Hold Down,Electric Clutch & Brake, S/N 18414 •ROWE Straightener Mdl. C-40, (7)Straightening Rolls, Entry & Exit PinchRolls – Air Lift, S/N 18415, Rowe ThreadingTable, Mdl. PTD-40, S/N 26924, ROWEServo Feed, Mdl. FDC-053-440-AB-SG,300 FPM, Anti Back-Up Roll, EMERSONPLC II Control, S/N 19110.1989 20,000 Lb. ROWE - Cap.30” Wide X .150” Thickness, ReelMdl. 20030 DS/J, Width 30”, ID 19”–24 1/2”, OD 60”, MotorizedExpansion, Electric Clutch & Brake,S/N 26963, ROWE StraightenerMdl. C3-30, (7) Straightening Rolls,Entry & Exit Pinch Rolls – Air Lift,Peeler, S/N 26963, ROWE ServoFeed, Mdl. PM FDC-053-230,300 FPM, PLC II Control, S/N 26965.

1989 20,000 Lb. ROWE - Cap.20” Wide X .020” - .175” Thickness,Reel Mdl. 20030 DS/J, Width 30”, ID19” – 24 1/2”, OD 60”, MotorizedExpansion, Electric Clutch & Brake,S/N 26969, ROWE StraightenerMdl. C3-20, (7) Straightening Rolls,Entry & Exit Pinch Rolls – Air Lift, ROWE Servo Feed, Mdl. PM-FDC-053-220, 300 FPM, PLC IIControl, S/N 26971.

1996 CWP Servo Feed, Mdl. SM12,Cap. 12” X .078”, Max ProgrammableLength 99.999”, S/N 14321

18” PERFECTO Straightener,Mdl. 17-18-7, Cap. 18” Wide X .065”Thickness, Vari-Speed 1500 IPM, (7)Straightening Rolls, Entry Pinch Rolls,S/N SS-4239.

COIL FEED LINES

1983 110-T CINCINNATI Gap Frame, Mdl. 110-OBS, Bed27” X 42”, Str 10” Max Programmable, Quick Die Change, 8-PointGib Guided, T-Slotted Bolster 4”, 25 HP Motor & Pump, S/N 45114.

(2) 12-T HANNIFIN Gap Frame, Mdl. T-13546, Bed 141/2” X 22”, Str 8”, Bolster 1” Thick, 5 HP Motor & Pump, S/N T-13546-5 & T-13546-7.

HYDRAULIC PRESSES

12,000 Lb. ROWE Coil Cradle, Mdl. 12030J, Width30”, ID 50”, Pinch Rolls, Motorized, S/N 9340.

8,000 Lb. ROWE Coil Cradle-Straightener, Mdl.B24 C8000J, Cap. 24” Wide X .030” - .080” Thickness,ID 50”, 7 Roll Straightener, Entry & Exit Pinch Rolls, VariSpeed, S/N 14610.

1985 4,000 Lb. ROWE Coil Cradle-Straightener, Mdl.B15/4J, Cap. 15” Wide X .030” - .125” Thickness, ID 50”, 7 RollStraightener, Entry & Exit Pinch Rolls, Vari Speed, S/N 26489.

COIL CRADLE/COIL CRADLESTRAIGHTENERS

1983

110-T CINCINNATI Gap Frame HydraulicPress, Mdl. 110-OBS 20,000 Lb. ROWE Servo Feed Line

20,000 Lb. AMERICAN STEEL LINE Uncoiler, Mdl. 60 CWP Servo Feed, Mdl. SM12

1996

7

20,000 Lb. AMERICAN STEEL LINE, Mdl. 60, Width 42”,Traveling Coil Lift, ID 18” – 23”, OD 60”, Motorized – Vari Speed, AirClutch & Brake, Hydraulic Expansion, S/N 4034.

10,000 Lb. AMERICAN STEEL LINE, Mdl. 1000, Width 42”,Traveling Coil Lift, ID 16” – 21”, OD 54”, Motorized – Vari Speed, AirClutch & Brake, Hydraulic Expansion, S/N 3287.

1987 10,000 Lb. HAYES Decoiler, s/n OCP8324.

1995 (2) 6,000 Lb. REEL-O-MATIC Pallet Style, Mdl. SPPT/6, Width 6”, OD 60”, Motorized, S/N 1-104-Er & 1-015-Er.4,000 Lb. LITTELL, Mdl. 40-18, Width 18”, ID 15” – 21”, OD54”, Electric Brake, Backing Plate, S/N 69825-62-3.2,000 Lb. LITTELL , Mdl. 20-12, Width 12”, ID 16” – 24”, OD48”, Motorized, S/N 79637-72.2,500 Lb. LITTELL Recoiler, Mdl. 25, Width 28”, ID 31 1/2” – 351/2”, Motorized, 1 1/2 HP Motor, S/N 28187-46.

UNCOILERS

AIR FEEDS HD Coil Type Feeder/ Straightener, Mdl.AF2, 36” Max Width, 36” Max Stroke, .040 Max StockThickness w/o Straightener,.030 Max Stock Thicknessw/Straightener; (5) S-36 Straightening Rolls, AdjustableCabinet Base, Adjustable Stroke Air Cylinder, Cured StockSupport, s/n 810510.

1980 DALLAS Coil Type Double Gripper Air Feed,Mdl. DGAF400, 18”x30”x.125 Capacity, 18” Max Width, 30”Max Stroke, .125 Max Thickness, Powered Pinch RollAssembly, Stock Oiler, Complete Electrics, s/n 13931.

1976 ROWE Coil Type Roll Feed, Mdl. FTCB-30, .090 MaxCapacity, 30” Max Width, Filter Regulator, Lubricator, (4) 3” PinchRolls; 35-100 FPM Vari Speed, Manual Adjust, 1.5HP, 1800 RPM, BeltDrive Motor to Main Shaft, Chain Drive main Shaft to Other (2) Shafts,Complete Electrics, s/n 20868.

COIL MATIC Feeder, Mdl. DRF-4236, s/n 78-21-40-177.

1971 ROWE Straightener/ Feeder, Mdl. S-36-TC, s/n 17597.

1993 FEED LEASE Air Feed/Straightener, Mdl. FL-31/4”X30X18, .090 Capacity, .060@30 w/Pull Through MaxMaterial Thickness & Width, 18 5/8” Max Stroke Length, 0 Min.Stroke Length, 50 SPM @ Max Stroke Length, Adjustable Legs onFrame, On/Off Switch, (6) Rolls on Straightener, s/n 4070.

COIL FEEDERS/COIL STRAIGHTENERS

20,000 Lb. CINCINNATI FORTE, Cap. 12” - 54” Wide X 14Gauge – 26 Gauge; Reel With Coil Car, ID 19” – 25”, OD 60”, PowerExpansion; Hold Down Arm; Thread Table S/N EC296-TT297;Straightener Mdl. RS-298, (9) Straightening Rolls, Entry Pinch Rolls – Air Lift; Edge Trimmer Mdl. E-T299SC300, Cap. 1/4” – 3”At 20 Gauge – 26 Gauge/1/4” – 1 1/2” At 14 Gauge; Shear, Cap.8” – 72” Length, Air Clutch; Stacker Mdl. MS-305, 54” Wide X72” Long, Cap. 54” X 72” Long.

DAHLSTROM Cut-To-Length Line, Mdl. ET1260-10,60”x10Ga. Mild Steel Capacity, Left to Right Travel, 144” MaxCut Length, 6” Min. Cut Length, 22Ga. Min. Gage, 18”-24” CoilI.D. Range, 60” Max Coil Width, 20,000 Lb. Max Coil Weight, s/nET-137 • Includes: DAHLSTROM Shear, Mdl. SH-60-10;DAHLSTROM Coil Car, Mdl. MCL-20-15; DAHLSTROMStacker/Conveyor; DAHLSTROM Coil Reel, Mdl. 20H-60-1824W;DAHLSTROM Straightener, Mdl. RT-60; DAHLSTROM ScrapChopper, Mdl. SC-10; DAHLSTROM Hump Table, Mdl. HT-A-60;DAHLSTROM Edge Trimmer, Mdl. ET 1260-10.

CUT-TO-LENGTH LINES

18” PERFECTO Straightener, Mdl. 17-18-7 20,000 Lb. CINCINNATI FORTE Cut-To-Length Lines

8

2001 MIGHTY MUSTANG CNC Vertical Machining Center,Mdl. C-42, 52”x18” Table, 42” Long Travel, 20” Cross Travel,24” Vertical Travel, 60-6000 Max RPM Vari Spindle Speeds, 400Cutting IPM, 600 Rapid IPM, CT 40 Spindle Taper, 14 Lb. Max ToolWeight, 4”x28” Spindle Nose to Table, 600 IPM Rapid TraverseRates, YASKAWA PC NC Control, 22.5HP Peak/15HP 30 MinuteRating Spindle Drive Motor, +/- 0.0004”/12” Position Reliability,20-Tool Storage Capacity, 60 Amp Power Consumption, FullLength Splash Guard, Chip Pan, Coolant System, Auto Lube, BoxWays, Random Tool Selection, 1,500 Lb. Max Table Load, BallScrew All-Axis Double Anchor, Bearing Support, s/n 42331.

CNC MILL SHEARS

PRESS BRAKES

1989 8’ X 10Ga. NIAGARA Squaring Shear, Mdl. 1R-8-10GA,36” FOPBG, Counterbalance, S/N S65582.

1988 4’ X 10Ga. NIAGARA Squaring Shear, Mdl. 1R-4-10GA,36” FOPBG, Counterbalance, S/N S65526.

150-T DREIS & KRUMP, Mdl. R8307, Perm Flanged Bed& Ram 18” X 76” T-Slotted, Str 3”, Air Clutch, S/N P8306.130-T CINCINNATI, Mdl. 130x6, Perm Flanged, Bed &Ram 17” X 104”, Str 3”, Air Clutch, Link Brake Monitor, S/N 22543.

2001

CNC

1989

MIGHTY MUSTANG CNC Vertical Machining Center, Mdl. C-42 150-T DRIES & KRUMP Press Brake, Mdl. R8307

8’x10Ga. NIAGARA Squaring Shear, Mdl. 1R-8-10GA 4’x10Ga. NIAGARA Squaring Shear, Mdl. IR-4-10GA

1988

BRANDNEW!

CLAUSING COLCHESTER 17” Engine Lathe KO LEE Surface Grinder, Mdl. S1024535

130-T CINCINNATI Press Brake 4’11” CINCINNATI BICKFORD Radial Arm Drill

MASTERCRAFT PRECISION • Milpitas, CASTATE-OF-THE-ART EDM & CNC MACHINE TOOLSBy Order of US Bankruptcy Court, Case #02-40996 T: COULTER FORGE, INC. • Emeryville, CASTATE-OF-THE-ART FORGED RING ROLLING FACILITYAssets No Longer Required in the Ongoing Operations of: MAGNEQUENCH INTERNATIONAL, INC. • Anderson, INSTATE-OF-THE-ART MAGNET & POWDER METAL MFR.Assets No Longer Required in the Ongoing Operations of: CAMI AUTOMOTIVE • Ingersoll, Ont., CanadaAUTO ASSEMBLY LINELENNOX HEARTH PRODUCTS • Lynwood, CAMFR. OF FIREPLACE EQUIPMENT & HARDWARETHE CHICAGO FAUCET COMPANY • Des Plaines, ILBRASS FOUNDRYEATON CORPORATION • Saginaw, MICOMPLETE AUTOMATIC IRON FOUNDRY

September 9

September 10

September 12

September 19

October 15

October 22

October 23

UPCOMING AUCTIONSUPCOMING AUCTIONS

(2) 1994 & 1992 BRUDERERHigh Speed Production Press(4 Post), Mdl. BSTA-22E,Capacity: 22-T x 5/16", Stroke(Adjustable) 5/16"-1 1/2", Shut Height@ 5/16" Stroke 7.12"-9.09" @ 1 1/2"Stroke 6.53"-8.5", Ram Adjustment1.97", Bed Size (L-R,F-B) 22" x 15 3/4",Ram Size (L-R,F-B) 21 3/4" x 10 3/4",Opening in Bed (L-R,F-B) 14.17" x 6.7",SPM (Variable) 100-1800, Max StripWidth (of BBV Feed) 6.3", Max StripThickness (of BBV Feed) 0.16", FeedLength (Adjustable) 0"-3.35", StripHeight (Adjustable) 1.97"-4.72",Dimensions (LxDxH) 54" x 47" x 93",Weight 8000 Lb., s/n’s RU4131 &RU4117, Equipped w/BRUDERERMdl. BBV 190/85 Precision Roll Feed,P.A. INDUSTRIES Mdl. SRWD-2-LCDouble Coil Reel, Cylindrical PostGuides, Auto Lubrication, Air Type OilCooler, Hyd. Ram Adjustment, 20HP.

TO BE SOLD VIA PHOTO • LOCATED IN LOS ANGELES, CA

PHONE BIDDING AVAILABLE FOR

THESE ITEMS. PLEASE CALL:

818.508.7034

2 AVAILABLE

1994 &

1992

818.508.7034

KNOW THEVALUEOF YOUR

ASSETS?

DOES!biditup!

9

10

View of Inspection Equipment 10-T YALE Crane

WILSON ROCKWELL Hardness Tester, Mdl. 3JR8RB

20,000 Lb. YALE Die Cart

10-T YALE Monorail Hoist

5-T YALE Monorail Hoist View of Forklifts

View of Conveyor Systems

MONARCH Lathe, 16 1/2” Swing Over Bed,10” Swing Over Cross Slide, 30” Centers, 12” 4-Jaw Chuck, Steady Rest, S/N 28353 •CLAUSING COLCHESTER 17” EngineLathe, 10” Swing Over Cross Slide, In/Mm, 84”Centers, 3” Thru-Hole, 12” 3-Jaw Chuck •CINCINNATI Vertical Mill, Mdl. 4, Table 111/2” X 68”, S/N 2A42D-23 • HUPPERT GasOven, Type ST, Style 20PCIFDOREL, 16” Wide X20” Deep X 13” Height, S/N 84 • (2) 1983-1974

VSI Spinn-O-Matics, Mdl. TM10, S/N2076R & 11018 • 4’ 11” CINCINNATIBickford Radial Arm Drill, L Base, BoxTables (2), S/N 1E-2 • MATTISON SurfaceGrinder, 16” X 48” Chuck, Travatrol Control,Wheel Dia 20”, S/N 21655 • KO LEE SurfaceGrinder, Mdl. S1024-535, Walker 10” X 24”Chuck, ACU-RITE 2 Axis Dro, S/N 3508-0-93 •KO Grinder, S/N B955 • CHICAGORivet, Mdl. 6948, S/N 912-1578 • 20”

AMERICAN Shaper • Misc Vices – 6” & 9”• Dust Collector • TAYLOR Spot Welder,ENTRON Control • 1966 SCIAKYResistance Spot Welder, Mdl.PMCO3ST-150-36, 150KVA, 10”x36” Throat,220V, 3PH, 302A Welding Controller, FootSwitch, 90,000 Peak Sec. Amps, s/n 7681 •Work Benches • (2) SIGNODE Strapper• Layout Tables.

TOOL ROOM EQUIPMENT

11

10-T YALE, 60’ Span, TwinRail, Pendant Control • 10-TSHAW BOX Monorail, 50’ RailLength, Underhung, PendantControl • 10-T YALE Monorail,Pendant Control • 5-T YALESeries 2000 Monorail, 25’Rail Length, Underhung, PendantControl • (4) 2-T CM &LODESTAR Monorail Hoist •10-T BUSHMAN C-Hook, 38”Wide • 20,000 Lb. DigitalCrane Scale • (3) DOK LOKVehicle Restraint SystemBuilt By RITE HITE • BLUEGIANT Powered Dock Ramp,Cap. 35,000#, Mdl. V705FH, S/N 9160218.

CRANES20,000 Lb. YALE Electric Die Handler, Platform 50” X 60”,Platform Height 17” – 69” • 10,000 Lb. TOWMOTOR LPG LiftTruck, Mdl. 670SLP10024, Lift 128”, S/N 670S0127 • 3,000 Lb.TOYOTA LPG Lift Truck, Lift 120” • 2,000 Lb. TOYOTA LPGLift Truck, Mdl. 44-1379, Lift 150” • 2,000 Lb. TOYOTA LPGLift Truck, Mdl. 42-31GC15, Lift 185”, S/N 403FCC15-132 •10,750 Lb. CLARK Electric Lift Truck, Mdl. FC5-120, Lift111”, S/N E912-23727FA • 6,000 Lb. HYSTER Electric LiftTruck, Mdl. E60XL-33, Lift 123 1/2”, Side Shift, S/NC108V13115L • 4,950 Lb. HYSTER Electric Lift Truck, Mdl. E60BS34,Lift 187 1/2”, Side Shift, S/N B108V09323D • 4,700 Lb. YALE ElectricLift Truck, Mdl. ERCO50JAN36SE083, Lift 190”, Side Shift,S/N N442751 • (2) 4,520 Lb. TOYOTA Electric Lift Truck,Mdl. 2EBC25, Lift 185”, Digital Control, S/N’s 2EBCA25-12031,2FBCA25-12026 • 4,000 BIG JOE Walk Behind Electric LiftTruck, Mdl. PDC-40-604, Lift Height 60”, Pallet 36”, S/N331627 • 2,600 RAYMOND Stand Behind Electric LiftTruck, Mdl. 311SR3OTT, 24” X 24”, S/N 031F-89-14475.

FORKLIFTS & DIE HANDLERS

BROWN & SHARPE XCEL CMM -Validator, RENISHAW PH1 Probe, PC,S/N 1288-105.Granite Plates 48” X 96” X 10” Thick& 48” X 60” X 8” Thick.COVEL MFG. Comparator, 14”, S/N14-1136 • MITUTOYO & SCHERRTumico Height Gauges.ROBERT SHAW Temperature Checker.MIKROTEST Thickness Gauge,S/N 3366.WILSON ROCKWELL HardnessTester, Mdl. 3JR8RB, S/N 11836.MISAWA SEIKI Hardness Tester,S/N 460501.

INSPECTIONEQUIPMENT

6’x4’ PENTALIFT Lift Table • MAC 36Volt Charger • (2) EXIDE Chargers •HOBART Charger Series 5, Mdl. MC-05 • HERTNER Charger, Mdl.TRC18-800WH, 18 Cell • BAGWELL 54Cu. Feet Air Receiver, S/N 3710 •FERRO MFG 18 Cell Charger • CEN

ELECTRONICS 36 Volt Charger, LB.MC-05 Controller, S/N 97J2941 •(9) Motorized Rubber Belt Conveyors,Width 18” & 24”, Length 10’ • (12) ACSIAUTOMATED CONVEYOR SYSTEMSRubber Belt Conveyors, Motorized, Width18”, 24” & 30”, Length 10’ – 30’ • Pallet

Racking: 10’ X 3’ X 10 Tall, 57” X 30” X 8’Tall, (73) 40” X 40” X 12’ Tall, (9) PlasticCollapsible Pallets & Steel Tubs: (58) 33” X47” X 32” Deep, 33” X 47” X 14” Deep •(23) 1 & 2 Yard Self Dumping Hoppers• (30) Parts Racks & Much More!

MISCELLANEOUS EQUIPMENT

TO BE SOLD VIA PHOTO • LOCATED IN PITTSBURG, KS

BERTHIEZ 276" Sliding Column Vertical Boring Mill, 148" Table, 106" Under Rail, Swivel Rail Hd. and Swivel Side H.D., .3-45 RPM, Taper and Threading, s/n 2103.

KING MACHINE TOOL PARTS 62" Vertical Boring Mill, 68" Swing, 52" Under Rail, 3-110 RPM, 2-Swivel Rail HDS, Side HD,Tracing Attach for R.H. Rail HD. 4-Jaw Chuck, 40 H.P. 220/440/3/60, s/n 2811.GIDDINGS & LEWIS BICKFORD 72" Vertical Boring Mill, 78" Swing, 79" Under Rail, 3.8-333 RPM , L.H. Swivel Rail HD,R.M. Rail Turret Hd., Side Hd. w/4-Way Tool Post, Syncro Turn Tracer on L.H. Rail Hd, s/n 7700.NILES Facing & Turning Lathe, 18' Swing X 71' Max Centers, 2-Facing and Turning Slides, 36" Hole Thru Spindle, 0-16 RPM,40 H.P. Drive.SACEM Powered Rotary Table, Mdl. MGL 2500, 78 3/4"x 98 1/2" Tee Slotted Work Surface, 72" Travel, 7.5 K.W. Drive A/Cwith controls 10 H.P., s/n 25006.

BERTHIEZ 276” Sliding Column Vertical Mill

KING MACHINE TOOLS PARTS 62” Vertical Boring Mill NILES Facing & Turning Lathe

SACEM Powered Rotary TableGIDDINGS & LEWIS BICKFORD 72” Vertical Boring Mill

1980’s

276”

Swing

18’ Swing x

71’ Max Centers

Extra

Vertic

al

Height

12

SSDC PRESSES

EDGEWIND SALES & MFG.EDGEWIND SALES & MFG.STAMPING FACILITY

11:00 AM, TUESDAY, OCTOBER 1ST11:00 AM, TUESDAY, OCTOBER 1ST

11886 COUNTY RD. 42, TECUMSEH (WINDSOR), ONT., CANADA#2

1200-Ton DANLY 4-Point SSDC Press, Mdl. SE4-1200

250-Ton HAMILTON SSDC Press, Mdl. 4E843 200-Ton NIAGARA SSDC PressMdl. SE2-200-60-36

1200-T DANLY 4-Point, Mdl. SE4-1200, Bed 66” X108”, Str 24”, SPM 12, Shut Height 53”, MotorizedAdjustment, Bolster 10” Thick, Air Clutch, Windows 46”,Gordon Brake Monitor.

600-T VERSON 4-Point, Mdl. SE4-600, Bed 60” X108”, Str 20”, SPM 20, Shut Height 54”, MotorizedAdjustment 18”, T-Slotted Slide & Bolster 4” Thick, Air Clutch,Air Cushions, Windows 35”, Hydraulic Overload, S/N 17296.

500-T VERSON, Mdl. 1080P, Bed 40” X 80”, Str 5”,SPM 32, Shut Height 29”, Motorized Adjustment 5”, T-Slotted Slide & Bolster 6” Thick, Air Clutch, FloorStanding, Windows 31”, Floor Standing, Gordon BrakeMonitor, S/N 4584.

(2) 250-T DANLY, Mdl. SS2-250, Bed 36” X 84”, Str 12”, SPM 25,Shut Height 38”, Motorized Adjustment 8”, T-Slotted Slide & Bolster 6”Thick, Air Clutch, Air Cushions, Floor Standing, S/N 52055904 &52055804.

250-T HAMILTON, Mdl. 4E843, Bed 50” X 84”, Str 6”, SPM 22, ShutHeight 24”, T-Slotted Bolster 6” Thick, Air Clutch, Air Cushion, S/N 1910.

1985 200-T BLOW, Mdl. S2-200, Bed 40” X 72”, Str 8”, SPM 30-60Variable, Shut Height 26” To Bed, Motorized Adjustment 4 3/4”, T-SlottedSlide & Bolster 5 1/2” Thick, Air Clutch, Floor Standing, Windows 26”,IMCO Tonnage Monitor, S/N SDG-200-226-85.

(2) 200-T NIAGARA, Mdl. SE2-200, Bed 36” X 60”, Str 12”, SPM 30,Shut Height 38”, Motorized Adjustment 12”, T-Slotted Slide & Bolster 6”Thick, Air Clutch, Air Cushions, Floor Standing, S/N 39415.

600-Ton VERSON 4-Point SSDC Press, Mdl. SE4-600

250-Ton DANLY SSDC Press, Mdl. SS2-250-84-36

2 AVAILABLE 2 AVAILABLE

500-Ton VERSON SSDC Press, Mdl. 1080P

OBI/GAP PRESSES150-T BLOW, Mdl. 9, Bed 30” X 48”,Str 8”, SPM 60, Air Clutch, S/N 9013.

(3) 80-T BLOW, Mdl. 7, Bed 24” X38”, Str 6”, SPM 30, Bolster Plate 3 1/2”& 4”, Air Clutch, Serial #AC7034,AC7068, & AC7076.

75-T NIAGARA, Mdl. A4 1/2, Bed 22”X 35”, Str 4”, SPM 35, Bolster Plate 3”,S/N 15858.

13

200-Ton BLOW SSDC Press, Mdl. S2-200 220-Ton AIDA Gap Frame Press, Mdl. C1-20 200-Ton McKAY/WARCO OBI Press, Mdl. G-200

1980

2 AVAILABLE

3 AVAILABLE

180-Ton VERSON OBI Press, Mdl. 9 150-Ton BLOW OBI Press, Mdl. 9 80-Ton BLOW OBI Press, Mdl. 7

1980 220-T AIDA, Mdl. C1-20, Bed 33”X 69”, Str 9 7/8”, SPM 35, T-Slotted Slide &Bolster 6 1/2” Thick, Air Clutch, AirCounterbalance, Gordon Brake Monitor,S/N 00220-0417.

(2) 200-T MCKAY/WARCO, Mdl. G-200,Bed 34” X 52”, Str 10”, SPM 30, T-SlottedBolster 4 3/4” & 6” Thick, Air Cushion, AirClutch, Air Counterbalance, S/N 66251-10A& 66251-10B.

180-T VERSON, Mdl. 9, Bed 36” X58”, Str 10”, SPM 30 - Eaton VariSpeed Drive, T-Slotted Slide & Bolster4 3/4” Thick, S/N18681, Air Clutch, AirCounterbalance

150-T WARCO, Mdl. G-150-1, Bed 33” X50”, Str 10”, SPM 36 - Vari-Speed Drive, T-Slotted Slide & Bolster 4 3/4” Thick, AirClutch, S/N 65-1778-10A.

1985

14

10,000 Lb. DALLAS Coil Cradle-Straightener, Mdl. DCCD-2460-P5, Cap24” Wide X .187” Thickness / 12” X .250”, OD 60”, 5 Roll Straightener, Entry & ExitPinch Rolls, Deflector, Flip Top Chute, S/N 10582.

10,000 Lb. ALPHA Coil Cradle-Straightener, Mdl. ACCD-2460, Cap 24”Wide X .187” Thickness, OD 60”, 5 Roll Straightener, Entry & Exit Pinch Rolls, VariableSpeed, Deflector, Flip Top Chute, S/N 1472-H.

10,000 Lb. ALPHA Coil Cradle, Mdl. ACCD-3072-P, Cap 30” Wide, OD 72”,Pinch Rolls – Air Lift, Deflector, Flip Top Chute, S/N 1589-UB.

24” ALPHA Air Feed, Mdl. A600, Cap 24”Wide X .312” Thickness, Str 24”, Air Cylinder 6”Diameter, 5 Roll Straightener, Pinch Rolls, Cabinet,S/N 1471-G.

30” ALPHA Air Feed, Mdl. D500, Cap 30”Wide X .150” Thickness, Str 24”, Air Cylinder 5”Diameter, 7 Roll Straightener, Pinch Rolls, Cabinet,S/N 1589-UA.

AIR FEEDSCOIL CRADLES / CRADLE STRAIGHTENERS

10,000-Lb. DALLAS Coil Cradle-Straightener, Mdl. DCCD-2460-P5 FORTE Horizontal Band Saw

HOBART Arc Welder, Mdl. 6045CV

ERLO Single Spindle Drill, Mdl. TCA-35

24” ALPHA Air Feed, Mdl. A600

30” ALPHA Air Feed, Mdl. D500

10,000-Lb. ALPHA Coil Cradle-Straightener, Mdl. ACCD-2460

4 AVAILABLE

2 AVAILABLE

THOMPSON Horizontal Surface Grinder, 14”x48”

HELLER 4’X15” Radial Arm Drill, Mdl. RB50 BRIDGEPORT Vertical Mill w/ACU-RITE II DRO

KENT Surface Grinder, Mdl. KGS-818AHD

1985

3 AVAILABLE

1994 MOTOMAN Robot, Mdl. YR-K6-C000, Payload 6 KG,YASKAWA Servo Motor, Order #S43685-1-2, S/N R119012-4068-02,YASNAC MRC Control With 60” Diameter Table • DO-ALL VerticalBand Saw, Table 24” X 24”, Vari-Speed 50-1600, Cabinet • (3) BRIDGEPORT Vertical Mills, Table 9” X 48”, ACU-RITE II 2-AxisDRO, 6” Vise, 2 HP, S/N BR264368, BR161865 • VILH PEDERSONVertical Mill, Type PV2, Table 12” X 51”, S/N 134147 • GARDNERHorizontal Mill, Mdl. U2 Blue Chip, #U1, Table 10” X 55”, SpindleSpeeds 285-1500, S/N 2062 • CINCINNATI MILACRON Dual HeadHorizontal Mill, Hypowermatic, T-Slotted Table 26” X 96”, SpindleSpeeds 30-1200, Power Table Feed, Auto Quill Retract • HELLER 4’ X15” Radial Arm Drill, Mdl. RB50, Box Table, Spindle Speeds 40-1800, Feeds .0031” - .059”, S/N 27594 • SNAP-ON Abrasive BlastSystem, Blower, S/N YA434C • FORTE Horiz Band Saw, 80-230 FPM• 1985 KENT Surface Grinder, Mdl. KGS-818AHD, Chuck 8” X18”, S/N 85030402 • LIAN FENG Surface Grinder 6” X 18” •THOMPSON Horiz Surface Grinder, 14” X 48”, Power Elevation,Grinding Wheel 18” Diameter, S/N 401123I • BOYAR SCHULTZGrinder, Chuck 6” X 12”, S/N 16000 • HAVLIK Engine Lathe, Mdl.HG28, 11” X 30”, 6” 3-Jaw Chuck & 8” 3-Jaw Chuck, 1 1/2” Thru Hole,Steady Rest, Spindle Speeds 34-1800, S/N 217 • W & P 200 KVA SpotWelder, Mdl. 2000, Pertron Control, Water Cooled, S/N 1101 • (4) HOBART Arc Welders, Mdl. ARC 6045CV, Wire Feed, S/N495WS19685, 196WS01108, 02108 & 02111 • (4) HOBART Arc Welders,Mdl. 6045CV • HOBART Welder, Mdl. R-300, S/N 12RT-12650 •LINCOLN Plasma Welder, Pro Cut 60, S/N U1960100534 • MILLER300 Syncrowave Tig Welder, Cooling System, S/N JG133874 • 6”KING CANADA Bench Grinder • CIMCO Hydraulic Gap FramePress, Mdl. 6254, S/N 108666 • OHMA System PneumaticPress, Str 8”, S/N 7001 • MILLER Pneumatic Press • Work Tables• Layout Tables • CLARKE AMERICAN Floor Sweeper/Washer,Mdl. SS/7000, Width 48”, LPG, Sweep & Scrub/Double Scrub •WORTHINGTON 60 HP Air Compressor • ROLL AIR 60,Cycoflow Dry Air Cleaner • WORTHINGTON 50 HP AirCompressor • ROLL AIR 50, Cycoflow Dry Air Cleaner, S/N770808 • GARDNER DENVER 5 HP Compressor • AIRTEK Dryer,Mdl. 550, S/N 500H77218 • ZURN Air Dryer, Mdl. R100A, S/NR10787 • Custom Electric Heat Treat Oven, 6 1/2” X 9” Opening •(2) ERLO Single Spindle Drill, Mdl. TCA-35, T-Slotted Table 12” X 16”,Vertical Travel 8”, S/N 235 & 2309/447 • DELTA 16 1/2” Drill •(2) MASTERCRAFT 13” Drills • KALAMAZOO 6” Belt Grinder •(3) Pneumatic Custom Drill Assembly Cells • Horizontal &Vertical Drills • Dual Head Saw • MILWAUKEE Shop Vac •SIGNODE Strapper • METTLER Toledo Digital Scale •SINGLETON Corrosion Test Cabinet • Misc Bolster Plates •Height Gauges & Gauge Blocks • Granite Plates: 36” X 48” X 6”Thick, 24” X 36” X 6” Thick & 24” X 24” X 1 3/4” Thick • HEIGHTMATICHeight Gauge, Mdl. 600, MITUTOYO Readout.

TOOL ROOM EQUIPMENT

FORKLIFTS13,300 Lb. HYSTER LPG Fork Lift, Mdl. S120E, Lift 112 1/2”,S/N C4T2053F • 6,000 Lb. HYSTER LPG Fork Lift, Mdl.S60L, Lift 181 1/2”, S/N C1D7V157IS • 5,200 Lb. HYSTER LPGFork Lift, Mdl. S50XL, Lift 187”, S/N A187T1620F • FORDDiesel Platform Lift Stake Truck, Cargo 7000, GVWR 26,000,Trailer Length 20’, VIN 1FDWH70P2NVA27568 • SKY JACK INC.Electric Platform Lift, Platform 40” X 82”.

MATERIAL HANDLINGPallet Racks • (290) Collapsible Metal Baskets 46”X 42” X 30” Deep & 46” X 40” X 24” Deep • Plastic Tubs(85) 26” X 28” X 19” Tall & 38” X 48” X 31” Tall • 3-Tier DieStorage Racks 24”, 36” & 48” Deep X 178” Long.

DO-ALL Vertical Band Saw

CLARKE AMERICAN Floor Sweeper/Washer,Mdl. SS/7000

13,300 Lb. HYSTER LPG ForkliftFORD Diesel Platform Lift Stake Truck SKY JACK INC. Electric Platform Lift

W&P 200 KVA Spot Welder, Mdl. 2000 MOTOMAN Robot, Mdl. YR-K6-C000

1994

TERMSSale Conducted by: biditup!, Subject to our customary terms of sale, (Available at the auctionsite on the day of the sale), and any and all amendments and modifications announced by theauctioneer at the time of the auction. The auctioneer and seller make no warranties or guar-antees, expressed or implied, as to the defects in or the correctness or accuracy of thedescriptions in any advertising of any item(s) being auctioned and will not be responsible forany advertising discrepancies or inaccuracies of any kind. All items sold will be on an “AS IS”,“WHERE IS”, and “WITH ALL FAULTS”, basis “WITHOUT EXCEPTION” and “WITH REMOVAL ATBUYER’S RISK AND EXPENSE”. AUCTIONEER AND SELLER MAKE NO WARRANTIES OR GUAR-ANTEES OF ANY KIND, EXPRESSED OR IMPLIED AS TO THE NATURE, QUALITY, VALUE OR CON-DITION OF THE ITEM(S) BEING AUCTIONED OR ITS (THEIR)SUITABILITY FOR ANY USE. AUC-TIONEER AND SELLER EXPRESSLY AND SPECIFICALLY DISCLAIM WITHOUT LIMITATION ANYWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AUCTIONEERSHALL NOT BE LIABLE FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES. It shall bethe buyer’s obligation to verify information and descriptions of property prior to sale. biditup!,and its advertising agency assume no liability for errors or omissions in this brochure. Theauctioneer does not warrant the age,accuracy, genuineness, authenticity, description, weight,count or measure of any listings specified herein. Although it is not likely, auction sales aresubject to cancellation or postponement, and sometimes items are withdrawn from the sale,kindly contact biditup!, prior to travel as there will be no reimbursements. On the day of thesale, all successful bidders must immediately pay the full purchase price in cash, certifiedfunds, cashiers check, wire transfer or company check with a letter from the buyer’s bankguaranteeing unqualified payments to biditup! Your letter should be similar to the following:[Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified pay-ment to biditup! on the account listed herein up to the amount of $______. This letter is validuntil 30 working days after the auction sale.] Company checks without letter from bank guar-anteeing unqualified payment will not be accepted. The failure to make payment promptlyshall be considered default and each lot or lots so purchased will be placed for resale. Thebuyer must pay the total invoice price for all the lots purchased before any removal can begin.All buyers must pay applicable sales tax (unless evidence of exemption is provided to auc-tioneer’s satisfaction). Buyers are responsible for the transportation, associated costs andrisks involved in the removal of purchased item(s). Certain items may contain residual chem-icals and/or hazardous materials. The purchaser(s) hereby indemnify and hold harmless theauctioneer and seller from any and all damages, claims or lia-bility from any injuries to persons or property of any type what-soever caused during the sale of, during the removal, or duringuse or operation of the purchased item(s). If you are unable toattend, please contact us regarding placing a proxy bid. ALLITEMS SUBJECT TO PRIOR SALE. PLEASE NOTE: All sales aresubject to a 10% buyer’s premium.

U.S.FUND$ONLY

15

ROPERCORPORATIONASSETSFORMERLYOF:

ROPERCORPORATIONSTAMPINGFACILITY

10:30AMTUESDAY

SEPTEMBER24TH

10:30AMTUESDAY

SEPTEMBER24TH

100 MANUFACTURERSDR.CHATTANOOGA, TN

#1

EDGEWINDSALES& MFG.

EDGEWINDSALES& MFG.

STAMPINGFACILITY

10:30AMTUESDAY

OCTOBER1ST

10:30AMTUESDAY

OCTOBER1ST

11886 COUNTYROAD42TECUMSEH(WINDSOR),

ONT., CANADA

VISIT:www.biditup.comFOR ADDITIONAL ONGOING LIQUIDATIONS

& ONLINE SALES

DIRECTIONS FROM 1-24 IN CHATTANOOGA TO ROPER SALE SITE:From I-24 In Chattanooga, Take Hwy 27 North Across TheTennessee River To Manufacturers Road Exit (First Exit AfterCrossing River). Turn Left Onto Manufacturers Road And Travel 4/10Mile To Roper Plant On The Right (Last Building Before Market St).

Chattanooga MarriottTwo Carter PlaceChattanooga, TN(800) 841-1674

Hampton Inn2420 Williams StChattanooga, TN(800) 426-7866

Comfort Suites2431 Williams StChattanooga, TN(877) 424-6423

Motel 62440 Williams StChattanooga, TN(800) 466-8356

HOTEL INFORMATION

DIRECTIONS FROM DETROIT TO EDGEWIND SALE SITETake The Bridge Or Tunnel Into Windsor. Take EC Row Expressway(#2) East To Banwell Rd. Turn Right On Banwell Rd And Travel 1.7Miles Until Banwell Ends At County Rd 42. Turn Left Onto County Rd42 And Travel 6/10 Miles To The Plant On The Left Side.

DIRECTIONS FROM LONDON, ONT. TO EDGEWIND SALE SITETravel West On Hwy 401 To Expressway #2. Proceed West On #2 TowardsTecumseh And Banwell Rd. Turn Left Onto Banwell Rd And Follow Directions.

HOTEL INFORMATIONHoliday Inn Select1855 Huron Church Windsor, Ontario (519) 966-1200

Hilton277 Riverside DrWindsor, Ontario(519) 973-5555

Comfort InnAmbassador Bridge2765 Huron Church RdWindsor, Ontario(519) 972-1331

biditup11426 Ventura Blvd. Second FloorStudio City, CA 91604

Asa Marshall, Auctioneer, TN Lic. #2276Michael Martin, Auctioneer • M.G. Martin, Inc.

Information=Knowledge=Money • www.biditup.com

#2