roofing solutions - pmmproducts.com · roofing solutions tested and approved for all tile roof...
TRANSCRIPT
Roofing Solutions
Tested and Approved for All Tile Roof ProfilesLightweight compared to sanded Mortar and Mixes dry, wet, or set.
With Tile-Tite you will be using a superior, stronger, lighter product versus sanded mortar mixes. A 40 lb bag fills a 5 gallon bucket and will still be light enough to bring up to the roof, and a 10” trowel heaped with Tile-Tite only weighs half that of a trowel with sanded mortar.
A 40 lb bag of Tile-Tite once properly mixed with approximately 3 – 3.5 gallons of water, expands to at least the equivalent of
a heavy 80 lb bag of sand and cement.
Roof Tile Mortar
Strong&
Lightweight
Asphalt Tiles
Concrete Tiles Terracotta Tiles
Metal Roofs
Suitable SurfacesWhy Choose NXT Cool Coat®?
• Wide Variety of Colors• Ultra Durable• Keeps Your House Cool
During the Summer• Environmentally Friendly• Antimicrobial• 100% Waterproof• 12 Year Warranty
BEFORE AFTER
NXT Cool Coat® is a remarkable new heat reflective roof coating utilizing revolutionary Thermal Protection Technology® to reduce the temperature of your home in summer.
Enhance&
Cool
MaxiPoint™ is a viscous, ready to use roof pointing mortar that is easy to use and very durable. MaxiPoint™ is available in a range of colors to suit new and renovated roofs. No more cracked or faded mortar work
– 7 Year Warranty –
Wide Selection of Colors
Pre-mixed, Pre-colored. Ready-to-use.
Protect&
Restore
H1919-11276
www.PMMproducts.com325 Old Sanford Oviedo Road, Winter Springs, FL 32708 – 800.432.5539 • 1259 NW 21st Street, Pompano Beach, FL – 800.432.5097
Non-Acid Efflorescence & Oxide Residue Remover is a cleaning solution that breaks down and emulsifies efflorescence and oxide residue from tile roofs.
After
Coverage: Approximately 300–1500 ft2 per coat per gallon depending on surface
Before
Efflorescence & Oxide Remover
Remove&
Refresh