rohs test report - odroid · 2019-08-08 · test report no. : etlrd171206.0133-01 page 3 of 27 head...

Test Report No. : ETLRD171206.0133-01

of 27

Head Office : # 114 Gasan digital 2-ro, Geumcheon-gu, Seoul 08506, Republic of Korea Tel : 82-2-858-0786, FAX : 82-2-858-0788, www.etl.re.kr

Date of issue............... :

Aug 07, 2019

RoHS TEST REPORT

Applicant…..............…. :

Hardkernel

The following product was submitted and identified on behalf of the applicant as: -

Product name…........... :

Single Board Computer

Model(s)...................…. :

ODROID-XU4(XU4Q)

Date of receipt..…........ :

Jul 04, 2019

Test Period...…............ :

Jul 04 ~ Aug 07, 2019

Test method..…........... :

IEC 62321 series (EN 62321 series)

Test Result...……........ :

The product which was evaluated has fulfilled with requirement of Directive

2011/65/EU and its amending of the European Parliament on the restriction of the use of

certain hazardous substances in electrical and electronic equipment.

For further details, please refer to the following pages.

Approved by :

Technical Manager: Jeong Ryeol Baik

475-1, Manan-ro, Manan-gu, Anyang-si, Gyeonggi-do, Republic of Korea

This report is made solely on the basis of your instructions and / or information and sample(s) supplied by you and only responds to the tested sample(s) and doesn't guarantee the quality of your

all products. The report is not intended to be a recommendation for any particular course of action. You are responsible for acting as you see fit on the basis of the report results. ETL is under no

obligation to refer to or report upon any facts for any matters arising outside the agreed scope of the works. This report shall not be reproduced except in full, without the written approval of ETL

Inc.


of 27


INDEX

General description of the product.......................................................................................... 3

1. Specification.................................................................................................................... 3

TEST PROCEDURE................................................................................................................... 7

2. Photograph…………………............................................................................................ 4

Sampling & Review................................................................................................................... 5

1. Sampling & Review......................................................................................................... 5

2. Test method & Equipment…............................................................................................ 6

TEST RESULT............................................................................................................................ 8

Chemical analysis..................................................................................................................... 22

Evaluation.................................................................................................................................. 23

Abbreviation.............................................................................................................................. 25

Normative Reference................................................................................................................ 26


of 27


General description of the product

1. Specification

1) Tested model.......................... :

ODROID-XU4(XU4Q)

2) Difference between models... :

N.A.

3) Comment…………………….... :

This report was reissued by applicant's request and reproduced from the

previous test report.

(1) Information of the previous test report

Test Report No. ETLRD171206.0133

Date of receipt Dec 06, 2017

Test Period Dec 06, 2017 ~ Apr 10, 2018

Date of issue Apr 12, 2018

(2) Reason for reissue

- adding phthalates


of 27


General description of the product

2. Photograph

Front view

Rear view


of 27


Clause Requirement Check

1 Sampling

1.1 Historical likelihood of restricted substances being present in each material type. (e.g. organic substances in metal)

1.2 Check if the selected component can be mechanically disassembled.

1.3 Check if the collected samples are sufficient to measure by XRF.

1.4 Check if the collected samples are sufficient to measure by chemical analysis.

1.5 Check if the sample is enough to represent the characteristics of population.

2 Review of the Technical Documents for material, part or sub-assembly.

2.1 Applicant confirmed technical documents that needed additional investigation. (ETL did not confirmed technical documents that needed additional investigation.)

2.1.1 Supplier declarations, confirming that the restricted substance content of the material, part or sub-assembly is within the permitted levels and identifying any exemptions that have been applied.

2.1.2 Signed contracts confirming that the manufacturer's specification for the maximum content of restricted substances in a material, part, sub-assembly is fulfilled.

2.1.3 Material declarations providing information on specific substance content and identifying any exemptions that have been applied.

2.1.4 Analytical test results using the methods described or referenced in IEC 62321 series (EN 62321 series).

Sampling & Review

Sampling & Review


of 27


Test method & Equipment

1) Test method.................... : IEC 62321-3-1:2013, IEC 62321-4 : 2017,

IEC 62321-5 : 2013, IEC 62321-6 : 2015, IEC 62321-7-1 : 2015,

IEC 62321-7-2 : 2017, IEC 62321-8: 2017

(use all or part if necessary)

(

Test method & Equipment

2) Equipment....................... : ED-XRF SEA-1000A/Seiko and/or ED-XRF EA-1000AIII/Hitachi

GC/MS Clarus 500/Perkinelmer,

ICP-OES Optima 5300 DV/Perkinelmer,

UV-VIS Lambda 25/Perkinelmer,

IC-AQF ICS-1100/DIONEX

(use all or part if necessary)


of 27


3) Equipment....................... : ED-XRF SEA-1000A/Seiko and/or ED-XRF EA-1000AIII/Hitachi

TEST PROCEDURE

Start project

Review Document

Mechanical disassembling

XRF Screening Technical documents Chemical analysis

< Screening limit

Compliant product/components

Yes

No

Yes

Estimation of followings : Type A ; Spot test Type B ; Again XRF test with new sample Type C ; Check Technical documents Type D ; Chemical analysis

Compliance ?


of 27


TEST RESULT

No. XRF Data (mg/kg) Phthalate (mg/kg)

Estimation Result Cd Pb Hg Cr Br DIBP DBP BBP DEHP

1.1 BL BL BL BL BL BL BL BL BL Type D Pass

1.2 BL BL BL BL N.A. N.A. N.A. N.A. N.A. N.A. Pass

1.3 BL BL BL 114793 N.A. N.A. N.A. N.A. N.A. Type A Pass




1.7 BL BL BL BL BL BL BL BL BL Type C Pass

Comment :

1.1 1.2

1.3 1.4

1.6 1.7

1.5


of 27


TEST RESULT



1.8 BL BL BL BL 15156 BL BL BL BL Type C, Type D Pass








Comment :

1.8 1.9

1.10

1.11

1.12

1.13

1.151.14


of 27


TEST RESULT







2 BL BL BL BL BL BL BL BL BL Type D Pass

3 BL BL BL BL N.A. N.A. N.A. N.A. N.A. N.A. Pass


Comment :

1.16

1.17

1.18

1.19

2 3

4


of 27


TEST RESULT



5 BL BL BL BL BL BL BL BL BL Type C Pass







Comment :

5

6

7

8

10

11

9


of 27


TEST RESULT




12.2 BL BL BL BL 157636 BL BL BL BL Type C Pass



15 BL BL BL BL BL N.A. N.A. N.A. N.A. N.A. Pass








Comment :

12.1

12.213

14 15 16

17 18

19.1

19.2

21

20


of 27


TEST RESULT














Comment :

22

23 24 25

26 27

28.1

28.2 28.329.2

29.1


of 27


TEST RESULT









Comment :

30.3

30.1

30.2

31.231.1

31.3


of 27


TEST RESULT









Comment :

32.1 32.2

32.3

33.1

33.2

33.3


of 27


TEST RESULT









Comment :

34.1 34.2

34.3

35.1

35.2

35.3


of 27


TEST RESULT







40 BL 22270 BL BL N.A. N.A. N.A. N.A. N.A. ANNEX Ⅲ 6(c) Pass






Comment :

ANNEX Ⅲ 6(c) : Copper alloy containing up to 4% lead by weight.

3836 37

39

40

41

42 43.1

43.244


of 27


TEST RESULT










Comment :

45

46

47

48.1

48.2 48.3

48.4


of 27


TEST RESULT







48.9 BL BL BL 2318 BL N.A. N.A. N.A. N.A. Type A Pass

Comment :

48.5

48.6

48.7 48.8

48.9


of 27


TEST RESULT









Comment :

48.10

48.12

48.11

49.149.2 49.3


of 27


TEST RESULT




Comment :

49.4


of 27


Chemical analysis

Information

Sample No. Test report No. Analysis result (mg/kg)

DIBP DBP BBP DEHP

1.1 ETLR190717.2736 N.D. N.D. N.D. N.D.

1.6 ETLR190717.2737 N.D. N.D. N.D. N.D.

1.8 ETLR190717.2738 N.D. N.D. N.D. N.D.

1.12 ETLR190717.2739 N.D. N.D. N.D. N.D.

1.16 ETLR190717.2740 N.D. N.D. N.D. N.D.

1.17 ETLR190717.2741 N.D. 211 N.D. N.D.

1.19 ETLR190717.2742 N.D. 464 N.D. N.D.

2 ETLR190717.2743 N.D. N.D. N.D. N.D.

7 ETLR190717.2744 N.D. N.D. N.D. N.D.

8 ETLR190717.2745 N.D. N.D. N.D. N.D.

10 ETLR190717.2746 N.D. N.D. N.D. N.D.

11 ETLR190717.2747 N.D. N.D. N.D. N.D.

13 ETLR190717.2748 N.D. N.D. N.D. N.D.

14 ETLR190717.2749 N.D. N.D. N.D. N.D.

16 ETLR190717.2750 N.D. N.D. N.D. N.D.

18 ETLR190717.2751 N.D. N.D. N.D. N.D.

19.1 ETLR190717.2752 N.D. N.D. N.D. N.D.

24 ETLR190717.2753 N.D. N.D. N.D. N.D.

26 ETLR190717.2754 N.D. N.D. N.D. N.D.

28.2 ETLR190717.2755 N.D. N.D. N.D. N.D.

28.3 ETLR190717.2756 N.D. N.D. N.D. N.D.

30.1 ETLR190717.2757 N.D. N.D. N.D. N.D.

30.3 ETLR190717.2758 N.D. N.D. N.D. N.D.

43.2 ETLR190717.2759 N.D. N.D. N.D. N.D.

47 ETLR190717.2760 N.D. N.D. N.D. N.D.

49.1 ETLR190717.2761 N.D. N.D. N.D. N.D.

49.2 ETLR190717.2762 N.D. N.D. N.D. N.D.

49.4 ETLR190717.2763 N.D. N.D. N.D. N.D.

MDL in phthalate : 50 mg/kg

For furthe details, please refer to the chemical test report.


of 27


Evaluation

Evaluation

1) Results are obtained by ED XRF in regulated substances according to IEC 62321-3-1:2013.

2) While the restricted substances are PBBs, PBDEs and Cr6+, XRF test result is on total Br or total Cr.

Therefore, the additional investgation procedure is needed.

3) Screening limits in mg/kg for regulated elements in various matrices.

(Table A.2 of Annex A to IEC 62321-3-1:2013)

Element Polymers Metals Composite material

Cd BL ≤57< X <143≤ OL BL ≤57< X <143≤ OL BL ≤37< X < 163 ≤ OL

Pb BL≤690< X<1310≤OL BL≤690< X<1310≤OL BL≤ 490<X<1510≤ OL

Hg BL≤688< X<1312≤OL BL≤688< X<1312≤OL BL≤ 488<X<1512≤ OL

Cr BL ≤ 666 < X BL ≤ 666 < X BL ≤ 466 < X

Br BL ≤ 276 < X N.A. BL ≤ 226 < X

4) The criteria of BL in phthalate

Phthalate mg/kg

DIBP BL < 1000

DBP BL < 1000

BBP BL < 1000

DEHP BL < 1000


of 27


Evaluation

5) Restricted substances referred to in Article 4(1) of directive (EU) 2015/863 and maximum

concentration values tolerated by weight in homogeneous materials

Cd : 100 mg/kg (0.01 %)

Pb : 1000 mg/kg (0.1 %)

Hg : 1000 mg/kg (0.1 %)

Cr(VI) : 1000 mg/kg (0.1 %)

PBBs : 1000 mg/kg (0.1 %)

PBDEs : 1000 mg/kg (0.1 %)

DIBP : 1000 mg/kg (0.1 %)

DBP : 1000 mg/kg (0.1 %)

BBP : 1000 mg/kg (0.1 %)

DEHP : 1000 mg/kg (0.1 %)

6) Battery and packaging are not subject to directive 2011/65/EU.

- If battery or packaging is in the product, apply to the related directive.

- If battery or packaging was measured by XRF, the criteria of XRF result is 'Table A.2 of Annex A

to IEC 62321-3-1:2013' (only apply to the data for reference)


of 27


Abbreviation

Type A Detected more than screening limits on total Cr and confirmed the absence of Cr6+ by diphenylcarbazide reagent.

Type B Replaced by new sample to remeasure.

Type C Confirmed Technical Documents

Type D Conducted by chemical analysis.

Cd : Cadmium N.A. : Not Applicable

Pb : Lead N.D. : Not Detected

Hg : Mercury BL : Below Limit

Cr : Chromium .OL : Over Limit

Cr (VI) : Hexavalent chromium .X : Inconclusive

Br : Bromine H : High risk

PBBs : Polybrominated biphenyls .M : Medium risk

PBDEs : Polybrominated diphenyl ethers .L : Low risk

DIBP : Di-iso-butylphtalate MDL : Method Detection Limit

DBP : Dibutylphthalate

BBP : Butylbenzylphthalate

DEHP : Diethylhexylphthalate


of 27


Normative Reference

Directive 2011/65/EU and its amending.

The restriction of the use of certain hazardous substances in electrical and electronic equipment.

IEC 62321-2 : 2013

Determination of certain substances in electrotechnical product - Part 2: Disassembly, disjointment and mechanical

sample preparation.

IEC 62321-3-1 : 2013

Determination of certain substances in electrotechnical products - Part 3-1 : Screening -Lead, mercury, cadmium,

total chromium and total bromine by X-ray fluorescence spectrometry.

IEC 62321-3-2 : 2013

Determination of certain substances in electrotechnical products

- Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography

IEC 62321-4 : 2017


- Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS

IEC 62321-5 : 2013


- Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS,

ICP-OES and ICP-MS

IEC 62321-6 : 2015


- Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass

spectrometry(GC-MS)

IEC/TR 62476 : 2010


of 27


Normative Reference

IEC 62321-7-1 : 2015


- Part 7-1 : Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-

protected coatings on metal by the colorimetric method

IEC 62321-7-2 : 2017


- Part 7-2: Hexavalent chromium - Determination of hexavalent chromium(Cr(VI)) in polymers and electronics by the

colormetric method

IEC 62321-8 : 2017


- Part 8: Phthalates in polymers by gas chromatography-mass spectrometry(GC-MS), gas chromatography-mass

spectrometry using a pyrolyzer/thermal desorption accessory(Py/TD-GC-MS)

IEC/TR 62476 : 2010

Guidance for evaluation of products with respect to substance use restrictions in electrical and electronic products.

EN 50581 : 2012

Technical documentation for the assessment of electrical and electronic products with respect to the restriction of

hazardous substances.

EN 62474 : 2012

Material declaration for products of and for the electrotechnical industry.