rohn utility poles
DESCRIPTION
ROHN Utility PolesTRANSCRIPT
227Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard© 2011 ROHN PRODUCTS LLC
PU T I L I T Y P O L E S
P R E - E N G I N E E R E D U T I L I T Y P O L E S
GENERAL USE
ROHN Pre-Engineered steel utility poles o�er alight duty solution to satisfy utilities desiring analternative to wood poles. ROHN’s line of Pre-Engineered poles are lighter than typicalwooden and concrete poles and provide easyinstallation and low maintenance. ROHN o�ersPre-Engineered poles for either direct embed or�ange installations. The poles come standard witha hot-dip galvanized coating, but can also be painted or fabricated with weathering steel.
FEATURES
• Fast, easy installation• Each pole ships with the following: • Standard ground sleeve (at grade) • Standard sub-grade corrosion coating to 6” above grade • Cap plate • (2) 4” Nema Ground Lugs • Bearing Plate with drain hole • Jacking Lugs (at slip splices)• Optional items are available and may be ordered separately: • Step attachment clips • Climbing pegs / step bolts • Safety climb device • Port holes • Flanged base • Painted �nish• Custom designs are available for any height or application.
PRE-ENGINEEREDUTILITY POLES
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
P U T I L I T Y P O L E S
228© 2011 ROHN PRODUCTS LLC
B U Y E R S G U I D E
H 1 0 R P 0 5 0 W
Pole LoadingROHN
ProductsOverall
Pole Length (ft.)
Pole Finish, select either: - Weathering - Galvanized
The part number shown in the chart includes the pole loading and the overall length of the structure. The coating su�x (W or G) is added by the customer at the time of the order, along with any optional
items (�anged base, step clips and safety device, ports, special grounding lugs, special ground sleeves and paint).
The example below provides a guide, for ordering convenience.
Diameters are out-to-out width between �ats. Slope is change in diameter per foot of length. Overturning moment capacity is at grade.
In the example shown, the customer is purchasing an H10RP, with an overall length of 50’. The pole is to be constructed of Weathering Steel, with a Direct Embed Base.
NOTE: Values in ( ) indicate horizontal factored loads applied 2’ from the tip.
Embedment depths illustrated may require adjustment based on local soil conditions.
Pole Part Number Finish
H 1 0 R P ( 18,400# / 11,500#)
Factored load for steel polesEquivalent factored loadfor wood poles
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER SLOPE NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LBS)(FT-KIP)
H 1 0 R P (18,400# / 11,500#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
21.222.423.525.126.327.628.830.131.332.633.834.435.736.938.239.440.7
PARTNUMBER
H10RP040H10RP045H10RP050H10RP055H10RP060H10RP065H10RP070H10RP075H10RP080H10RP085H10RP090H10RP095H10RP100H10RP105H10RP110H10RP115H10RP120
12.012.012.012.012.012.012.012.012.012.012.012.012.012.012.012.012.0
0.2300.2310.2300.2380.2380.2400.2400.2410.2410.2420.2420.2360.2370.2370.2380.2380.239
11122222222333333
19452253258130743440389643044765521056666148677972827918845991539731
368420472523576627680730785834890937995
1041110011411206
OTM
@ 5
’ = 1
83
ft-kip
s
(IN/FT)
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
TIPAGL(FT)
Overturning moment capacity at 5’ below tip.
7.5” Tip
13.1” - 27.5”Base Diameter
Embedment(L x .10) + 2’
229Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard© 2011 ROHN PRODUCTS LLC
P R O D U C T D A T A
PU T I L I T Y P O L E S
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER SLOPE NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
C 1 R P (4,500# / 2,812#)TIP
AGL(FT)
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
13.113.113.114.814.817.217.219.519.521.321.323.723.725.725.727.527.5
PARTNUMBER
C1RP040C1RP045C1RP050C1RP055C1RP060C1RP065C1RP070C1RP075C1RP080C1RP085C1RP090C1RP095C1RP100C1RP105C1RP110C1RP115C1RP120
7.57.57.57.57.57.57.57.57.57.57.57.57.57.57.57.57.5
0.1400.1240.1120.1330.1220.1490.1390.1600.1500.1620.1530.1710.1620.1730.1650.1740.167
11122222222333333
9811092120114421553187619992337247728402937340335604033419746434820
91103117128143153169179196204223229250267277280305
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER SLOPE NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
C 2 R P (3,700# / 2,313#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
13.114.514.515.915.917.317.318.718.720.120.122.022.023.723.725.525.5
PARTNUMBER
C2RP040C2RP045C2RP050C2RP055C2RP060C2RP065C2RP070C2RP075C2RP080C2RP085C2RP090C2RP095C2RP100C2RP105C2RP110C2RP115C2RP120
7.57.57.57.57.57.57.57.57.57.57.57.57.57.57.57.57.5
0.1400.1560.1400.1530.1400.1510.1400.1490.1400.1480.1400.1530.1450.1540.1470.1570.150
11122222222333333
9811161127715051629188220072274240626742818322233683774392843834547
758496
105116137147157168178189199209215220230241
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER SLOPE NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
C 3 R P (3,000# / 1,875#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
13.114.514.515.915.917.317.318.718.720.120.121.521.522.922.924.324.3
PARTNUMBER
C3RP040C3RP045C3RP050C3RP055C3RP060C3RP065C3RP070C3RP075C3RP080C3RP085C3RP090C3RP095C3RP100C3RP105C3RP110C3RP115C3RP120
7.57.57.57.57.57.57.57.57.57.57.57.57.57.57.57.57.5
0.1400.1560.1400.1530.1400.1510.1400.1490.1400.1480.1400.1470.1400.1470.1400.1460.140
11122222222333333
9811161127715051626188220072274240626772818316933123678382842244384
6168788596
102113119131136144153161170178187195
OTM
@ 5
’ = 5
1 ft-k
ips
OTM
@ 5
’ = 5
3 ft-k
ips
OTM
@ 5
’ = 5
3 ft-k
ips
(IN/FT)
(IN/FT)
(IN/FT)
TOTALLENGTH(FT) “L”
404550556065707580859095
100105110115120
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
TIPAGL(FT)
TIPAGL(FT)
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
P U T I L I T Y P O L E S
230© 2011 ROHN PRODUCTS LLC
P R O D U C T D A T A
7.5” - 8” Tip
13.1” - 33”Base Diameter
Embedment(L x .10) + 2’
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER SLOPE NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 1 R P (5,400# / 3,375#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
13.114.214.216.016.018.518.521.021.023.023.026.026.028.028.029.529.5
PARTNUMBER
H1RP040H1RP045H1RP050H1RP055H1RP060H1RP065H1RP070H1RP075H1RP080H1RP085H1RP090H1RP095H1RP100H1RP105H1RP110H1RP115H1RP120
7.57.57.57.57.57.57.57.57.57.57.57.57.57.57.57.57.5
0.1400.1490.1340.1550.1420.1690.1570.1800.1690.1820.1720.1950.1850.1950.1860.1910.183
11122222222333333
9811161126115161636196621022465261129523092370538724309448849505133
109138140153171184202214234245246278298305330336363
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 2 R P (6,400# / 4,000#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
13.616.016.017.517.519.419.422.022.024.524.527.327.329.429.431.431.4
PARTNUMBER
H2RP040H2RP045H2RP050H2RP055H2RP060H2RP065H2RP070H2RP075H2RP080H2RP085H2RP090H2RP095H2RP100H2RP105H2RP110H2RP115H2RP120
7.87.87.87.87.87.87.87.87.87.87.87.87.87.87.87.87.8
0.1450.1820.1640.1760.1620.1780.1660.1890.1780.1960.1860.2050.1950.2060.1960.2050.197
11122222222333333
10161251137516381765205621942592274431383304388040554510469852365433
129146165182202218239254277290314326352362390398428
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 3 R P (7,500# / 4,688#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
14.817.017.018.818.821.021.023.223.226.026.028.628.631.231.233.033.0
PARTNUMBER
H3RP040H3RP045H3RP050H3RP055H3RP060H3RP065H3RP070H3RP075H3RP080H3RP085H3RP090H3RP095H3RP100H3RP105H3RP110H3RP115H3RP120
8.08.08.08.08.08.08.08.08.08.08.08.08.08.08.08.08.0
0.1700.2000.1800.1960.1800.2000.1860.2030.1900.2120.2000.2170.2060.2210.2110.2170.208
11122222222333333
10771309144017281865218423352708287033023475404442264775497354805684
150171193213235255278298321340365382407424451466494
OTM
@ 5
’ = 5
2 ft-k
ips
OTM
@ 5
’ = 5
7 ft-k
ips
OTM
@ 5
’ = 6
2 ft-k
ips
(IN/FT)
SLOPE(IN/FT)
SLOPE(IN/FT)
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
TIPAGL(FT)
TIPAGL(FT)
TIPAGL(FT)
8.5” - 9” Tip
16.5” - 38.5”Base Diameter
Embedment(L x .10) + 2’
231Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard© 2011 ROHN PRODUCTS LLC
P R O D U C T D A T A
PU T I L I T Y P O L E S
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 4 R P (8,700# / 5,438#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
16.518.218.220.220.222.222.224.324.327.227.230.030.032.332.334.934.9
PARTNUMBER
H4RP040H4RP045H4RP050H4RP055H4RP060H4RP065H4RP070H4RP075H4RP080H4RP085H4RP090H4RP095H4RP100H4RP105H4RP110H4RP115H4RP120
8.58.58.58.58.58.58.58.58.58.58.58.58.58.58.58.58.5
0.2000.2160.1940.2130.1950.2110.1960.2110.1980.2200.2080.2260.2150.2270.2160.2300.220
11122222222333333
11161336147617861935225324102788295634033589417143654929513757665985
174199223247273296322345372394421443471492522541572
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 5 R P (10,000# / 6,250#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
17.520.020.022.022.024.324.326.526.529.029.031.731.734.334.337.037.0
PARTNUMBER
H5RP040H5RP045H5RP050H5RP055H5RP060H5RP065H5RP070H5RP075H5RP080H5RP085H5RP090H5RP095H5RP100H5RP105H5RP110H5RP115H5RP120
9.09.09.09.09.09.09.09.09.09.09.09.09.09.09.09.09.0
0.2130.2440.2200.2360.2170.2350.2190.2330.2190.2350.2220.2390.2270.2410.2300.2430.233
11122222222333333
11811447160119292090245926313016319836253820443646405231544961376365
200228257284314341371397429453487509545566603622662
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 6 R P (11,400# / 7,125#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
18.321.021.023.223.425.725.928.328.330.830.833.433.437.037.038.538.5
PARTNUMBER
H6RP040H6RP045H6RP050H6RP055H6RP060H6RP065H6RP070H6RP075H6RP080H6RP085H6RP090H6RP095H6RP100H6RP105H6RP110H6RP115H6RP120
9.09.09.09.09.09.09.09.09.09.09.09.09.09.09.09.09.0
0.2300.2670.2400.2580.2370.2570.2390.2570.2410.2560.2420.2570.2440.2670.2550.2570.246
11122222222333333
12111495165520032173256527413191338138164021462248355592582071827529
228260292324357388421452486517551581616645681709746
OTM
@ 5
’ = 7
1 ft-k
ips
OTM
@ 5
’ = 8
0 ft-k
ips
OTM
@ 5
’ = 8
2 ft-k
ips
SLOPE(IN/FT)
SLOPE(IN/FT)
SLOPE(IN/FT)
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
TIPAGL(FT)
TIPAGL(FT)
TIPAGL(FT)
10.0” Tip
20.0” - 38.7”Base Diameter
Embedment(L x .10) + 2’
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
P U T I L I T Y P O L E S
232© 2011 ROHN PRODUCTS LLC
P R O D U C T D A T A
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 7 R P (13,120# / 8,200#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
20.021.322.522.824.025.226.427.628.830.231.331.933.134.335.536.737.9
PARTNUMBER
H7RP040H7RP045H7RP050H7RP055H7RP060H7RP065H7RP070H7RP075H7RP080H7RP085H7RP090H7RP095H7RP100H7RP105H7RP110H7RP115H7RP120
10.010.010.010.010.010.010.010.010.010.010.010.010.010.010.010.010.0
0.2500.2500.2500.2330.2330.2340.2340.2350.2350.2380.2360.2310.2310.2310.2320.2320.233
11122222222333333
13361558179125652867318035093816421946435008589963656853735678538369
263299337373411446485521559595634668710742784816859
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 8 R P (15,040# / 9,400#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
19.220.421.522.223.324.425.626.827.929.130.230.932.033.234.335.436.6
PARTNUMBER
H8RP040H8RP045H8RP050H8RP055H8RP060H8RP065H8RP070H8RP075H8RP080H8RP085H8RP090H8RP095H8RP100H8RP105H8RP110H8RP115H8RP120
10.010.010.010.010.010.010.010.010.010.010.010.010.010.010.010.010.0
0.2300.2310.2300.2220.2220.2220.2230.2240.2240.2250.2240.2200.2200.2210.2210.2210.222
11122222222333333
17121993229526452968336637264161455349615385592563316917740480408560
301343385428471512556597642682727766814851900935986
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 9 R P (16,800# / 10,500#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
20.021.222.523.124.525.727.028.129.530.732.033.233.935.136.237.538.7
PARTNUMBER
H9RP040H9RP045H9RP050H9RP055H9RP060H9RP065H9RP070H9RP075H9RP080H9RP085H9RP090H9RP095H9RP100H9RP105H9RP110H9RP115H9RP120
10.010.010.010.010.010.010.010.010.010.010.010.010.010.010.010.010.0
0.2500.2490.2500.2380.2380.2400.2400.2410.2410.2420.2420.2360.2370.2370.2380.2380.239
11122222222333333
17542050236427403085347738534314472851755607615366257240775484018946
315383420478526572621667716761812856908950
100410451100
OTM
@ 5
’ = 8
5 ft-k
ips
OTM
@ 5
’ = 1
30
ft-kip
sO
TM @
5’ =
13
3 ft-k
ips
SLOPE(IN/FT)
SLOPE(IN/FT)
SLOPE(IN/FT)
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
TIPAGL(FT)
TIPAGL(FT)
TIPAGL(FT)
12.0” Tip
21.2” - 40.7”Base Diameter
Embedment(L x .10) + 2’
233Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard© 2011 ROHN PRODUCTS LLC
P R O D U C T D A T A
P U T I L I T Y P O L E S
Design Notes:
1. Pole designs are in accordance with ASCE 48, “Design of Steel Transmission Pole Structures”.
2. Pole sections are ASTM grade 65 material with a charpy impact value of 15 ft-lbs at -20 F.
3. Multiple section poles include slip splice joints with a minimum slip length equal to 1.5 times the inside
diameter across flats of the outer section at the splice.
4. Galvanized poles are hot-dip galvanized in accordance with ASTM A123.
5. Tabulated weights assume galvanized poles.
OVERTURNINGTIP BASEMOMENTDIAMETER DIAMETER NO. WEIGHT
CAPACITY(IN) (IN) SECTIONS (LB)(FT-KIP)
H 1 0 R P (18,400# / 11,500#)TOTAL
LENGTH(FT) “L”
404550556065707580859095
100105110115120
21.222.423.525.126.327.628.830.131.332.633.834.435.736.938.239.440.7
PARTNUMBER
H10RP040H10RP045H10RP050H10RP055H10RP060H10RP065H10RP070H10RP075H10RP080H10RP085H10RP090H10RP095H10RP100H10RP105H10RP110H10RP115H10RP120
12.012.012.012.012.012.012.012.012.012.012.012.012.012.012.012.012.0
0.2300.2310.2300.2380.2380.2400.2400.2410.2410.2420.2420.2360.2370.2370.2380.2380.239
11122222222333333
19452253258130743440389643044765521056666148677972827918845991539731
368420472523576627680730785834890937995
1041110011411206
OTM
@ 5
’ = 1
83
ft-kip
s
o
SLOPE(IN/FT)
34.038.543.047.552.056.561.065.570.074.579.083.588.092.597.0
101.5106.0
TIPAGL(FT)
Phone (309) 566-3000 • Fax (309) 566-3079 • www.rohnnet.com • The Industry Standard
P U T I L I T Y P O L E S
234© 2011 ROHN PRODUCTS LLC
Pole Height(AGL)
30’ - 50’
60’ - 100’
110’ - 150’
Part Number
TT050TSP
TT100TSP
TT150TSP
15”
P A R T S & A C C E S S O R I E S
STEP BOLTS
STEP BOLTS AND STEP BOLT CLIPSARE OPTIONAL AND MUST BESPECIFIED AT TIME OF ORDER.
CLIMBING HARNESSTTFBH-4D
JOURNEYMAN HARNESS
TTFBH-C/PPROFESSIONAL HARNESS
SAFETY CABLE SLIDERWITH CARABINEERTT-WG-500-W/SMC
SAFETY CABLE SYSTEM