rocketry: achieving liftoff
DESCRIPTION
Rocketry: Achieving Liftoff. Outline. Forces on a Rocket Newton’s 1 st and 2 nd Laws of Motion Newton’s 3 rd Law Combustion and Chemical Rockets Understanding Rocket Trajectories The Acceleration Phase The Descent Phase. 1.1 Forces on a Rocket. Did you Know?. - PowerPoint PPT PresentationTRANSCRIPT
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Rocketry: Achieving Liftoff
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Outline
Forces on a Rocket Newton’s 1st and 2nd Laws of Motion Newton’s 3rd Law Combustion and Chemical Rockets Understanding Rocket Trajectories The Acceleration Phase The Descent Phase
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
1.1 Forces on a Rocket
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Did you Know?
In order to reach orbit, NASA’s space shuttle must attain a speed of 7,847 meters per second (about 17,500 miles per hour).
How do rocket engines launch objects into space?
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Forces Rocket engines are
able to move rockets at high speed because they apply a large amount of force to the rocket.
Forces are quantities known as vectors because they have both a magnitude and a direction.
Vectors are often drawn as arrows whose lengths indicate the magnitudes of the
forces.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Forces on Rockets
Thrust is the force created by the combustion of fuel that propels the rocket upward.
Drag is a force that results from the rocket pushing on the surrounding molecules of air. Drag is friction that acts in the direction opposite the motion of the rocket.
Weight is caused by gravity and pulls the rocket toward the ground.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Mass and Weight Mass and weight are not one and the same. Mass
measures the amount of matter in an object and does not vary from place to place. Weight measures the force of gravity on an object and varies depending on the strength of the gravity.
Weight can be represented as W = mg, where m is the mass of the object, and g is the acceleration due to gravity.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Powered Ascent There are three main phases of
rocket flight for rockets that do not enter orbit—powered ascent, coasting ascent, and descent.
Powered ascent occurs while the engine is producing thrust.
During powered ascent, T > W + D.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Coasting Ascent Coasting ascent happens after the
engine has stopped producing thrust.
During this phase, drag is very small compared to weight, so the force acting on the rocket is roughly equal to the weight.
The force of the weight causes the rocket to decelerate until its velocity reaches zero.
T = 0
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Descent Descent occurs after the velocity of
the rocket reaches zero, at which point the rocket begins to accelerate toward the ground.
Most rockets have a parachute or other recovery system to increase drag until it balances the weight.
Increased drag slows the rocket down during descent.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Rocket Components A rocket consists of the rocket body,
the payload, the recovery system, and the engine, which includes the fuel.
The engine provides thrust and the recovery system increases drag.
The payloads of real rockets can include satellites, equipment, or people.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Example 1The mass of a model rocket body, payload, and recovery system is 34.0 g. The mass of the engine is 16.0 g. What is the weight of the rocket?First, we have to find the total mass of the rocket.
Next, we should convert the mass to kilograms, so that our solution for weight works out to be newtons.
Finally, we multiply the acceleration due to gravity (g) by mass to get weight.
m = 34.0 g+16.0 g = 50.0 g
1 kg= 50.0 g× = 0.05 kg
1,000 gm
2 2= 0.05 kg×9.81 m / s = 0.491 kg×m / s = 0.491 NW
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
1.2 Newton’s 1st and 2nd Laws
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Newton’s 1st Law & Inertia
Newton’s first law of motion states that an object’s speed and direction of motion will remain unchanged unless an outside force acts on the object.
The tendency to resist changes in motion is a property of matter called inertia.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Newton’s 2nd Law & Acceleration
When a net force acts on an object and causes it to change its speed or its direction of motion, the object is said to be accelerated.
Newton’s 2nd law of motion states that to accelerate an object, we need to apply a force to the object.
Fnet = ma
Fnet = net force
m = mass
a = acceleration
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Calculating AccelerationAcceleration is the change in speed of an object per unit of time, or the rate of change of an object’s speed.
1 0
1 0
v -va = =
t - t
change in speed
time
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
For any two objects with the same net force, Fnet, Newton’s 2nd Law requires that .
In other words, if you apply the same net force to two objects, and one of the objects has twice the mass of the other, the more massive object will accelerate only half as quickly as the less massive object.
1 2
2 1
a m=
a m
Newton’s 2nd Law
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Exercise 1.3: Mass, Force, and Acceleration
Suppose you are performing acceleration experiments on two objects that have equal mass—a pillow and a shoe.If you accelerate the shoe twice as quickly as the pillow, how much more force do you need to apply to the shoe?
SOLUTIONNewton’s 2nd law of motion states that if the masses of two objects are the same, then the rate at which each object is accelerated is proportional to the net force. If the shoe is accelerated twice as quickly as the pillow, then the net force on the shoe is twice as large.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Rocket MotionAccording to Newton’s 2nd law, accelerating a rocket upward, or in a positive direction, requires a net upward force. The net forces acting on the rocket throughout its three phases of flight are as follows:
Launch and Powered Ascent: Fnet = T - W
Coasting Ascent: Fnet = - W
Descent: Fnet = D - W
*Notice that we always subtract W because it is always acting downward, or in a negative direction. Also, it is assumed that D 0 during ascent.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Example 4If a rocket has a mass of 50 g and the engine produces a thrust of 8 N at launch, what will be the initial acceleration of the rocket?
= 8.0N-0.491N = 7.51NnetF =T -W
2 227.51 N 7.51 kg×m / s 7.51 kg× m / s
= = = =150.2 m / s1 kg50 g 0.05 kg50 g×
1,000 g
netFa =
m
2
2
1 kg= 50 g× ×9.81 m / s
1,000 g
= 0.491 kg× m / s = 0.491 N
W = mg
Step 1: Solve for a by dividing both sides by m
Step 2: Find value of W
Step 3: Plug in numbers to find Fnet
Step 4: Simplify and convert to SI units
netF ma= = a
m m; therefore, netF
a =m
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Activity 1.6: Testing Newton’s 2nd Law with a Rocket Car
Objective: You will conduct several trials to determine the effect of mass
on the time it takes your rocket car to travel a certain distance. In each trial, the net force applied to the car should be approximately the same.
Analysis:The travel time increases as mass is added to the car.
According to Newton’s 2nd law of motion, the more massive an object is, the more net force is required to accelerate it at a given rate.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
2.1 Newton’s 3rd Law
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Rocket Power
How do rocket engines propel aircraft? Or launch missiles from beneath the sea? Or launch spacecraft into orbit?
Like all propulsion systems, rocket engines generate thrust.
Thrust can be generated according to Newton’s 3rd law of motion.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Newton’s 3rd Law
Any force is always accompanied by a force of equal magnitude that acts in the opposite direction
In other words, the “action-reaction” principle
If you were standing on a skateboard and threw a ball, the ball would move forward
and you would move backward.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Conservation of Momentum
The final momentum of the system equals the initial momentum of the system, so the momentum of the system is conserved.
momentum = mass x velocity
MV = -mv
MV = momentum of person
mv = momentum of the ball
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Putting it All Together
• Rocket engines and a person throwing a ball while standing on a skateboard generate thrust in a similar way.
• In rockets, the engine creates thrust by forcing propellant away from the rocket at high speed.
• This causes a reaction force (thrust) that pushes the rocket in the opposite direction.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Activity 2.4 Build a slingshot “car” that will demonstrate Newton’s 3rd law of
motion. Explain how Newton’s 3rd law relates to the behavior of your
slingshot car. How are the number of rubber bands and the amount of weight in the film canister related to the distance traveled by the car?
Answer: Even though the mass in the canister and the number of rubber bands varied, the action of launching the canister always occurred with the equal reaction of moving the car. When more rubber bands were added, the thrust force of the slingshot increased. When more mass was added to the film canister, the same amount of thrust would move the car farther.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
2.2 Combustion and Chemical Rockets
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Combustion
How does a rocket engine move the propellant away from the rocket at a high velocity?
Answer: A chemical reaction known as combustion
Fuel + Oxidizer → Products + Energy
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Did you Know?The Saturn V rocket that launched the Apollo missions to the moon used liquid oxygen (LOX) as an oxidizer and a form of kerosene for fuel.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Energy for Propulsion
This figure illustrates the results of burning paper in a box. In the case of a rocket engine,
combustion of
the fuel and the oxidizer results in an extremely high gas pressure in the combustion chamber.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
A Rocket Engine
In real rocket engines, the “box” where combustion takes place is called the combustion chamber.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
A Model Rocket Engine
Model rocket engines (also called “motors”) are chemical rockets that use black powder as a propellant.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Activity 2.6Objective
Discover how Newton’s laws of motion determine the performance of a chemical rocket.
Materials
several sheets of construction paper, clear tape, scissors, paper towels, several effervescing antacid tablets, water, plastic 35 mm film canister, safety goggles, lab apron, paper towels for cleanup
Procedure
Record any observations you have on the performance of your rocket. Include an estimate of how high your rocket flew.
Repeat the experiment several times, each time changing one of the parameters of your rocket.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
3.1 Understanding Rocket Trajectories
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Three Phases
The path that a rocket takes while in flight is called a trajectory.
If the rocket doesn’t go into orbit, it completes three phases.
1. Powered ascent
2. Coasting ascent
3. Descent
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Graph of a Rocket Trajectory
t
h
H
tb
Powered Ascent
Coasting Ascent
Descent
In a graph of height vs. time, constant acceleration is shown as a curved path called a parabola and constant velocity is shown as a straight line.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
3.2 The Acceleration Phase
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Predicting How Fast and How High
Maximum Velocity
Vb = velocity at burnout
I = impulse
Mavg = average rocket mass
g = acceleration caused by gravity
tb = engine burn time
Maximum Height
H = maximum height
g = acceleration caused by gravity
I = impulse
Mavg = average rocket mass
bavg
b gtM
IV
2
2
1
avgM
I
gH
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Putting it All Together
The key factors that determine the maximum height and speed of a rocket are the engine impulse, the average mass of the rocket, and the engine burn time. Higher altitudes can be achieved by increasing the rocket’s impulse, by decreasing the burn time, or by decreasing the rocket’s average mass.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
3.3 The Descent Phase
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Importance of Drag
Unless a large drag is present during the descent phase, the rocket will fall at a high rate of speed and crash into the ground.
Parachutes and other types of recovery systems increase drag.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Drag Force
D = drag force
CD = drag coefficient
d = density of air
A = area of recovery system
VD = descent speed
CD for a parachute = 1.4
Objects like race cars and airplanes have low drag coefficients.
2
2
1DDdAVCD
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Drag and a Parachute’s RadiusFor a parachute, A is the
area seen when looking straight up.
We can calculate area using A=πr2
The drag developed by the recovery system is determined by the shape of the recovery system (CD), its size (A), and the descent speed of the entire system.
infinity-project.orgThe Institute for Engineering Education
Engineering Education for today’s classroom.
Example 1After an Alpha III rocket with a B6-4 engine reaches a maximum altitude of 378 m at burnout, its parachute, with a diameter of 0.305 m, is deployed. The mass of the rocket, including its engine, is 53.1 g, and the mass of the propellant is 5.6 g. Assuming that the drag coefficient is 1.4 and the density of air is 1.20 kg/m3, how long will it take the rocket to reach the ground after the parachute is deployed?
Solution: First, calculate area of the parachute. Next, calculate the velocity, and finally, solve for the descent time. td = 2 min 15 sec