rocket the wonder dog command manual...wake up (about 15 seconds). important! to conserve battery...

Model Numbers: 77806, 77807, 77808

COMMANDMANUAL

ROCKET™ THE WONDER DOG

COMMANDMANUAL

Out of thisWorld

1

TABLE OF CONTENTSFrom out of this world...and into your home. . . . . . . .2-3

Rocket™ The Wonder Dog . . . . . . . . . . . . . . . . . . . .4-5

Trainer in Training (3+ Years) . . . . . . . . . . . . . . . . . .6-7

Expert Trainer (6+ Years) . . . . . . . . . . . . . . . . . . . .8-15

Just for Fun! . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17

Alkaline Batteries . . . . . . . . . . . . . . . . . . . . . . . . .18-19

Caring for Rocket™ . . . . . . . . . . . . . . . . . . . . . . . . . .20

Before You Call Us . . . . . . . . . . . . . . . . . . . . . . . . . .21

Consumer Information . . . . . . . . . . . . . . . . . . . . . . . .24

FCC Note (United States Only) . . . . . . . . . . . . . . . .25

ICES Statement (Canada Only) . . . . . . . . . . . . . . . . .25

Warranties . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27

Certificate of Pedigree . . . . . . . . . . . . . . . . . . .29 & 31

JUST CAN’T WAIT???

Follow these simple instructions to try out Rocket™ The Wonder Dog!

1. Install alkaline batteries in the P.P.T. and the dog.Refer to pages 18-19.

2. Fit the remote headset on your child’s head, with themicrophone toward your child’s mouth.

3. Open the large cover on the P.P.T.

4. Slide the dog’s Power Switch (on his belly) to the ON ● position.

5. With the glowing L.E.D. on the dog’s head lit, press aCommand Button on the P.P.T.

6. Then, have your child speak the command into the remote headset microphone and watch Rocket™ go into action!

To learn how to properly use Rocket™ The WonderDog, please read through this entire manual carefully.

Y2Y

FROM OUT OF THIS WORLD...

Way, way out in the Milky-Bone Galaxy, beyondthe Canine Comets and the famous Dog Star andeven Pluto, there’s a world of friendly creaturesknown as the Planet Rrruff. Here, everyone rompsand runs, sits up and begs, curls upand sleeps, and of course, wagstheir tails. They do a lot of licking.But mostly they like to play. Every-one’s favorite friend was RocketTM.

Each day, other Rrruffians wouldcome over and beg him to play. RocketTM would rollhis eyes patiently, scratch a little, shake and wag histail. Then he would trot along to join his friends in a game of Tag or Rrred Rrrover or Who’s Got theBiscuit? But RocketTM thought there must be more tolife. When night came, he would gaze out at thestars and wonder.”I wonder what else is out there?” “I wonder why stars sparkle?” “I wonder what it’slike to have someone love you?” Then RocketTM

would walk around in a circle three times, lie downand sleep soundly until morning.

One day, just as the sun came up, RocketTM

perked up his ears and sniffed all around. Somethingwas different. Strange. New and wonderful. RocketTM

followed his nose to see where it would lead. Hisnose led him uphill and down, over the Slow Rrriver,through the Rrredwood Forest and right to the edgeof the Rrred Sea. Sitting there, sparkling in the sun,was the strangest contraption RocketTM had ever seen!

322K9

...AND INTO YOUR HOME.

“Bow-WOW!” RocketTM barked in wonder as hebounded through the opening of the shiny machine.“It looks like a dog house made of silvery stars! Andlook at all the neat buttons.” Being the wonderingdog he was, RocketTM started pushing those buttonswith his left paw. He was so curious about the flashing lights and whirring sounds, he didn’t evennotice the door sliding closed behind him. But he did notice when the contraption started to move.

Up it flew, soaring into the sky, carrying RocketTM away from the Planet Rrruff and through the Milky-Bone Galaxy, past the Dog Star and theCanine Comets and even Pluto, rocketing himtoward a new world full of exciting new adventures. “I wonder what it will be like...” wondered RocketTM.

YOUR OWN WONDER DOG

4

Remote Headset

Dog

PersonalPuppy Trainer (P.P.T.)

Command L.E.D.(Glows)

Large Cover

Power L.E.D.(Glows)

Program Switch Door

Trainer 1Play ★

Trainer 2

Name Button N

Erase All Hole

CommandButtons(See page 5)

Power Switch

Treat

Microphone

L.E.D.

5

Sit

Lie Down

Shake Hands

Do Trick

Let’s Go

Stand Up

Beg

Speak

Bad Puppy

STARTYour child or children caninteract with the dog in twodifferent modes, depending on their age: Trainer in Training (3+ years) or ExpertTrainer (6+ years). Choosewhich mode you’d like to start!

Trainer in Training (3+ Years)Open the P.P.T. Large Cover for thismode. Your child wears the remoteheadset and uses the P.P.T. with theLarge Cover open. Your child simplypresses the desired Command Button on the P.P.T., speaks into the headset and your dog goes into action!

Expert Trainer (6+ Years)Close the P.P.T. Large Cover for thismode. Your child wears the remoteheadset and programs (records) a new name and voice commands intothe P.P.T. There’s no need to use theCommand Buttons on the P.P.T. (afterprogramming it) in this advancedmode, so keep the Large Coverclosed! Your child speaks the pro-grammed name and voice commandsinto the headset. Watch your dogperform the desired command!

The P.P.T. can recognize up to two master’s voices – so noone’s left out. Simply slide theProgram Switch to Trainer 1 to program one child’s voice.Then, slide the ProgramSwitch to Trainer 2 to programanother child’s voice.

6

PowerSwitch

Important!

Make sure the L.E.D. onthe microphone pointsaway from your child’s mouth and toward the glowing L.E.D. on thedog’s head.

TRAINER IN TRAINING (3+ YEARS)

• Fit the remote headset on your child’s head. Be sure to place the microphone (on the mouthpiece) about11/2"- 2" from your child’s mouth (not too close or faraway). Make sure the L.E.D. on the mouthpiece pointstoward the glowing L.E.D. on the dog’s head.

• Hook the P.P.T. to your child using the convenient belt clip.

• Open the Program Switch Door on the P.P.T. and selectPlay ★ . Close the Program Switch Door. You’re inTrainer in Training Mode.

• Slide the dog’s Power Switch (on his belly) to the ON ●position. The dog needs to wake up (about 15 seconds).

Important!

To conserve battery life,we recommend that youslide the dog's PowerSwitch to the OFF Oposition when your child is not playing with the dog.

To turn off power on theP.P.T., press and hold theLarge Cover closed for fiveseconds. The power L.E.D.will shut off.

7

TRAINER IN TRAINING (3+ YEARS)

• Open the Large Cover on the P.P.T.

• Make sure the glowing L.E.D. on the dog’s head is lit.

• Press a Command Button (try ) on the P.P.T.

• Your child must speak into the microphone.

Your child says: “Sit.”

• Make sure your child waits until the glowing L.E.D. onthe dog’s head is lit before pressing another CommandButton. If your child presses a Command Button on the P.P.T. before the glowing L.E.D. lights, the dogignores the command and may do something different.

Hint

If the dog does notreceive another command after approximately two minutes, the dog will automatically go to sleep(shut-off). To turn back on, simply pat the dog’s back.

Hint

If the dog ignores the command, he maysurprise you with hisresponse!

Hint

Your child must speak intothe microphone withinthree seconds of pressinga Command Button. Also,any word will do!

8

Programming a New Name

• Have your child choose a new name for the dog. Practicesaying the dog’s new name – speaking clearly and in anormal voice (not too loud or soft). When playing with thedog, your child needs to say the dog’s new name thesame way it is programmed (recorded).

• Fit the remote headset on your child’s head. Be sure toplace the microphone (on the mouthpiece) about 11/2"- 2"from your child’s mouth (not too close or far away).

• Slide the dog’s Power Switch (on his belly) to the OFF O position. The dog is not needed for programming.

• Open the Program Switch Door. Slide the ProgramSwitch to Trainer 1 or Trainer 2. Make sure you take note of which master’s voice is programmed on Trainer 1 and on Trainer 2.

• Press the Name Button .

• Listen for the voice prompt through remote headset.“Please say your dog’s name.”

• Now, it’s your child’s turn to say the dog’s name.

Your child says: “Rocket.”

Important!

Your child must choose a quiet room to program(record a voice) the P.P.T.

Hint

Your child can choose anew name...be creative!

Hint

The dog can have two masters (and two names) simply by sliding the Pro-gram Switch to Trainer 1for the first child and thenTrainer 2 for a second child.Make sure the second child (Trainer 2) picks a different name for the dog than the first child,Trainer 1.

N

EXPERT TRAINER (6+ YEARS)

9

• If your child speaks too loud, too soft, too soon, or thechosen name is unclear, the voice prompt may say:“Too loud. Please try again.”; or “Too soft. Please tryagain.”; or “Too soon. Please try again.”; or “What didyou say?”

Again, your child says: “Rocket.”

• If the P.P.T. does not recognize the name after threetries, the voice prompt says: “Training - your dog’s name failed.” If this happens, please press the NameButton again and start the new name programming process again.

• When new name programming is successful, the voiceprompt will ask your child to repeat the name a secondtime. “Please repeat your dog’s name.”

• Your child now needs to repeat the dog’s new nameagain in a clear, normal voice.

Your child says: “Rocket.”

• If the repeated name is not recognized, the voiceprompt will repeat the request.

• When new name programming is complete, the voiceprompt will tell you that training is complete, and you willhear the name of the dog in your child’s voice. “TrainingRocket complete.”

Oops, if you make a mistake…

To erase a programmed name:

• Open the Program Switch Door. Make sure the Program Switch is on Trainer 1 or Trainer 2 – depending on which programmed name you’d like to erase.

• Press and hold the Name Button for five seconds, until the voice prompt says, “Command erased.”

N

N


Congratulations!

Naming your dog is nowcomplete! Now, fill in the chart on page 13 with your child(ren)’s programmed new name.

Hint

If your child is having trouble programming anew name, try program-ming a name with multiplesyllables. For example,instead of programmingthe name “Spot”, try programming the name“Buddy”.

10

Important!

Your child must choose a quiet room to program(record a voice) the P.P.T.

Hint

The dog can have twomasters simply by slidingthe Program Switch toTrainer 1 for the first childand then to Trainer 2 for a second child!

Hint

For best performance, we recommend that yourchild use the followingwords to program voicecommands: Sit, Lie Down,Shake Hands, Do Trick,Let’s Go, Stand Up, Beg,Speak, Bad Puppy.


Programming Voice Commands

• Have your child practice all the voice commands that will be programmed in a clear, normal voice (not too loud or soft). When playing with the dog, your child needs to say the voice commands the same way theyare programmed (recorded).

• Fit the remote headset on your child’s head. Be sure to place the microphone (on the mouthpiece) about 11/2" - 2" from your child’s mouth (not too close or far away).

• Slide the dog’s power switch (on his belly) to the OFF O position. The dog is not needed for programming.

• Open the Program Switch Door. Slide the ProgramSwitch to Trainer 1 or Trainer 2. Make sure you takenote which master’s voice is programmed on Trainer 1and on Trainer 2.

11

Hint

If your child is having trouble programming voicecommands, try program-ming more than one wordor a word with multiple syllables. For example,instead of programmingthe command “sit”, try programming “sit down”.

Important!

If programming fails after several tries, your childmay be too young tospeak clear enough (orclear enough repetively) to program the P.P.T. We recommend that your child use the dog in Trainer in Training mode.

Congratulations!

Voice command program-ming is now complete!Now, fill in the chart onpage 13.


• Open the Large Cover on the P.P.T.

• Press a Command Button on the P.P.T.

• Listen for the voice prompt through the remote headset. “Please say sit.”

• Now, it’s your child’s turn to say the command.


• If your child speaks too loud, too soft, too soon, orunclear, the voice prompt may say: “Too loud. Please tryagain.”; or “Too soft. Please try again.”; or “Too soon.Please try again.”; or “What did you say?”

Again, your child says: “Sit.”

• If the P.P.T. does not recognize the voice command after three tries, the voice prompt says: “Trainingfailed.” If this happens, please press a Command Button again and start the voice command programmingprocess again.

• When programming a voice command is successful, thevoice prompt will ask your child to repeat the commanda second time. “Please repeat sit.”

• Your child now needs to repeat the command again in a clear, normal voice.


• If the repeated voice command is not recognized, thevoice prompt will repeat the request.

• When programming a voice command is complete, thevoice prompt will tell you that programming is complete,and you will hear the command in your child’s voice. “Training Sit complete.”

• Repeat this sequence to program all nine commands. Then, slide the Program Switch to Play ★ , and close the Program Switch Door.

12


Oops, if you make a mistake….

To erase a programmed voice command:

• Open the Program Switch Door. Make sure the ProgramSwitch is on Trainer 1 or Trainer 2 – depending on whichprogrammed voice command(s) you’d like to erase.

• Press and hold the desired Command Button for five seconds, until the voice prompt says, “Command erased.”

To erase all programmed name(s) and voice commands:

• Open the Program Switch Door. Make sure the ProgramSwitch is on Trainer 1 or Trainer 2 – depending on whichprogrammed name and voice commands you’d like to erase.

• Insert and hold a blunt, thin object (do not use a pin) in the Erase All Hole for five seconds, until the voiceprompt says, “Erased all.”

13

PROGRAM CHART

Use this chart to keep track of what has been programmed into the P.P.T.

Trainer 1 Trainer 2

Dog’s Name

� Yes � No

Sit

Commands

� Yes � No

Lie Down

� Yes � No

Shake Hands

� Yes � No

Do Trick

� Yes � No

Let’s Go

� Yes � No

Stand Up

� Yes � No

Beg

� Yes � No

Speak

� Yes � No

Bad Puppy

Dog’s Name

� Yes � No

Sit

Commands

� Yes � No

Lie Down

� Yes � No

Shake Hands

� Yes � No

Do Trick

� Yes � No

Let’s Go

� Yes � No

Stand Up

� Yes � No

Beg

� Yes � No

Speak

� Yes � No

Bad Puppy

14

Hint

After saying the dog’sname, your child must first wait for a “beep”sound and then say thedesired command withinthree seconds.

Hint

Make sure your childwaits until the glowingL.E.D. on the dog’s headis lit before giving anothercommand. If your childgives another commandbefore the glowing L.E.D.lights, the dog ignores it,but may surprise you with his response!


Using your Puppy’s Name and Voice Commands

• Fit the remote headset on your child’s head. Be sure to place the microphone (on the mouthpiece) about 11/2" - 2" from your child’s mouth (not too close or faraway). Make sure the L.E.D. on the mouthpiece pointstoward the glowing L.E.D. on the dog’s head.


• Open the Program Switch Door on the P.P.T. and selectPlay ★ . Close the Program Switch Door.

• Slide the dog’s Power Switch (on his belly) to the ON ● position. The dog needs towake up (about 15 seconds).

• Close the Large Cover on the P.P.T. You’re in Expert Mode.

Your child says the dog’s name: “Rocket.”

• Wait for a “beep” sound in the remote headset. That’syour child’s cue to give the command.

Your child says: “Do trick.”

• After two “beep” sounds in the remote headset, thedog carries out the command!

Important!

Make sure the L.E.D. onthe microphone pointsaway from your child’s mouth and toward the glowing L.E.D. on thedog’s head.

15

Hint

After pressing the LargeCover on the P.P.T., yourchild must first wait for a“beep” sound and thensay the desired commandwithin three seconds.

Important!

To conserve battery life,we recommend that youslide the dog's PowerSwitch to the OFF Oposition when your child is not playing with the dog.

To turn off power on theP.P.T., press and hold theLarge Cover closed for five seconds. The power L.E.D. will shut off.

Hint

If the dog does notreceive another commandafter approximately twominutes, the dog will automatically go to sleep(shut off). To turn back on,simply pat the dog’s back.


Using Only Voice Commands

• Fit the remote headset on your child’s head. Be sure to place the microphone (on the mouthpiece) about 11/2" - 2" from your child’s mouth (not too close or faraway). Make sure the L.E.D. on the microphone pointstoward the glowing L.E.D. on the dog’s head.


• Open the Program Switch Door on the P.P.T. and selectPlay ★ . Close the Program Switch Door.

• Slide the dog’s Power Switch (on his belly)to the ON ● position. The dog needs towake up (about 15 seconds). You’re in Expert Mode.

• Close the Large Cover on the P.P.T.

• Press the Large Cover on the P.P.T. and wait for a“beep” sound in the remote headset. That’s your child’scue to give the command. Release the Large Cover.

Your child says: “Lie down.”

• After two “beep” sounds in the remote headset, thedog carries out the command!

16

Good Dog!

Give your dog a reward.Place the treat in his mouth and be sure to press down on his tongue.

JUST FOR FUN!

Important!

Place only the dog treatprovided into the dog’smouth. To prevent damage,do not place any otherobject in the dog’s mouth.

Hint

Watch what happens if...you feed your dog toomany times. Or, how yourdog reacts differentlywhen you give him a treatafter the commands begor shake hands.

17

Give ‘em a Pat

What better reward than a loving pat on his noseor back.

Help ‘em Out

Turn his right ear and helphim scratch his fleas!

Watch what happens if...you press his nose whileperforming a command.

Hint

• Locate the battery compartments in thedog and P.P.T.

• Loosen the screw in each battery com-partment door with a Phillips screwdriverand open the doors.

• Insert one 9 volt and three “D” alkalinebatteries in the dog; and three “AAA”alkaline batteries in the P.P.T. as indi-cated in the battery compartments.

• Replace the battery compartment doorsand tighten the screws with a Phillipsscrewdriver. Do not over-tighten.

18

BATTERY INSTALLATION

P.P.T. Battery Compartment

Dog Battery Compartment

Important!

For longest battery life, we recommendthe use of alkaline batteries in thistoy. You can expect approximately 6 hours of power with each fresh set of "D" batteries (in the dog).

We also recommend the use of highcapacity, rechargeable "D" batteries inthe dog. High capacity “D” batteries canbe purchased at most electronics stores.

1.5V x 3“AAA” (LR03)

1.5V x 3“D” (LR20)

– +

– +

BATTERY TIPS

9 Volt (6LR61)

+

–

• Always use alkaline batteries.

• Do not mix old and new batteries.

• Do not mix different types of batteries:alkaline, standard (carbon-zinc) orrechargeable (nickel-cadmium).

• Remove the batteries during long periods of non-use. Always removeexhausted batteries from the toy. Batteryleakage and corrosion can damage thistoy. Dispose of batteries safely.

• Never short circuit the battery terminals.

• Non-rechargeable batteries are not to be recharged.

• Only batteries of the same or equivalenttype as recommended in the BatteryInstallation instructions are to be used.

• If removable rechargeable batteries areused, they are only to be charged underadult supervision.

• Rechargeable batteries are to beremoved from the toy before they are charged.

• If you use a battery charger, it shouldbe examined regularly for damage to thecord, plug, enclosure and other parts.Do not use a damaged battery chargeruntil it has been properly repaired.

• If the dog moves sluggishly or does not move at all, it’s time for an adult to replace the batteries.

• If the power L.E.D. on the P.P.T. does not light after pressing a command button, it's time for an adult to changethe batteries.

20

• Do not carry the dog by his tail. Carry the dog with one hand under his belly.

• Keep water, sand and dirt off of the dog.

• Keep the dog way from direct sunlight and excessive heat.

• Do not drop the dog on a hard surface.

• Wipe the dog with a clean cloth dampened with a mildsoap and water solution. Do not immerse the dog.

• The dog has no consumer serviceable parts. Do not take the dog apart.

CARING FOR ROCKETTM

BEFORE CALLING US... Training Errors

21

Symptom Diagnosis

P.P.T. voice promptsays, “Too soft.”

P.P.T. voice promptsays, “Too soon.”

P.P.T. voice promptsays, “Too loud.”

P.P.T. voice promptsays, “What did yousay?”

P.P.T. voice promptsays, “Training ‘Nameor Command’ failed.”

You press a buttonand it’s already programmed.

• Move the microphone closer to your child's mouth – approximately 11/2"- 2".

• Speak in a normal tone of voice.

• Wait for the P.P.T. voice prompt to stop speaking.• The room may be too noisy. Program the P.P.T. only in

a quiet room.

• Move the microphone farther from the child's mouth – up to 2" away.

• Speak in a normal tone of voice.

• What was recorded a second time did not sound the same as the first time.

– Repeat the name or command exactly as the first time.– Erase the name or command. Re-program the name

or command, this time try enunciating the word with harder consonants.

– Erase the name or command. Re-program the name or command, this time with multiple consonants.

• The P.P.T. was unable to find enough distinct, repeatable sounds.

– Erase the name or command. Re-program the name or command, this time try enunciating the word with harder consonants.

– Erase the name or command. Re-program the name or command, this time with multiple consonants.

• Open the Program Switch Door and slide the Program Switch to the other trainer position (Trainer 1 or Trainer 2).

• Press and hold the Name Button or particular CommandButton for 5 seconds to erase the programmed name or command.

• Open the Program Switch Door and insert a blunt, thin object (do not use a pin) into the Erase All Hole to erase all program-ming for either Trainer 1 or Trainer 2.

N

22

Voice Recognition Errors (Expert Mode)

Symptom Diagnosis

You do not hear a“beep” sound after you say the dog’sname.

You hear one “beep”sound after you saythe dog’s name; but do not hear two“beep” sounds after you say thecommand.

• P.P.T. power has shut-off and power L.E.D. is not lit. Press anyCommand Button or the P.P.T. Large Cover.

• The L.E.D. on the mouthpiece is not pointed toward the glowing L.E.D. on the dog’s head. Be sure the L.E.D. on the mouthpiece is not twisted and is in direct line with the L.E.D. on the dog’s head.

• The P.P.T. did not recognize the voice because it was “toosoft”. Make sure the microphone is approximately 11/2"- 2"from your child’s mouth.

• Your child did not program the name. Please refer to page 8 toprogram a new name.

• Your child is not using the same name programmed. Open theProgram Switch Door on the P.P.T. and slide the ProgramSwitch to Trainer 1 or Trainer 2. Press the Name Button andcheck which name is programmed.

• Your child is not saying the name the same way it was original-ly programmed. Open the Program Switch Door on the P.P.T.and slide the Program Switch to Trainer 1 or Trainer 2. Pressthe Name Button to hear how the name was programmed.

• Your child does not need to say the dog’s name in this mode.With the Large Cover on the P.P.T. closed, simply press theLarge Cover, wait for a “beep” sound, release the LargeCover and then speak the desired command.

• The P.P.T. did not recognize the voice because it was “too soft”. Make sure the microphone is approximately 11/2"- 2" from your child’s mouth.

• The L.E.D. on the mouthpiece is not pointed toward the glowing L.E.D. on the dog’s head. Be sure the L.E.D. on the mouthpiece is not twisted and is in direct line with the L.E.D. on the dog’s head.

• Your child did not program the command. Please refer to page10 to program a voice command.

• Your child is not using the same command programmed. Turndog power off. Open the Program Switch Door on the P.P.T.and slide the Program Switch to Trainer 1 or Trainer 2. Pressthe desired Command Button and check what has been programmed.

• Your child is not saying the command the same way it was programmed. Turn dog power off. Open the Program SwitchDoor on the P.P.T. and slide the Program Switch to Trainer 1or Trainer 2. Press the desired Command Button to hear howthe command was programmed.

• Your child did not wait for the “beep” sound before saying the command. Be sure to wait for the “beep” sound.

• Your child waited too long (more than three seconds) after the“beep” sound. Make sure your child says the command withinthree seconds after the “beep” sound.

Dog Errors

Low Battery Problems

23

Symptom Diagnosis

You hear a snappingor grinding noise andsome of the legs donot move.

The dog appears tohave become stuckin a particular actionor command.

The dog produces a series of 5 beepstwice in a row.

• The legs are jammed because there is an object lodged inthem. Turn power off on the dog and remove the object.

• The legs are interferring with each other. Turn power off on the dog and manually move the legs to the stand position.

• The legs jammed on the head. Turn power off on the dog and manually move the head to the center position and thelegs to the stand position.

• Turn the dog's power off and back on again.

• Please call Fisher-Price® Consumer Relations at 1-800-432-KIDS (US); 1-800-567-7724 (Canada).

Symptom Diagnosis

After installing freshbatteries in the P.P.T.and the dog, the dogseems to run for onlyone or two hours.

After turning poweron the dog ON, thedog does not do anything; but thecommand L.E.D. on his head lightsimmediately.

Dog moves sluggishly.

The power L.E.D. on the P.P.T. doesnot light.

• You have probably installed the wrong type of batteries. Use only alkaline batteries for longest battery life.

• The 9 volt battery in the dog is weak or dead. Replace the 9 volt battery in the dog with a fresh, alkaline 9 volt battery.

• The ”D” batteries in the dog are weak or dead, Replace all three “D” batteries with fresh, alkaline batteries.

• The “AAA” batteries in the P.P.T. are weak or dead. Replace all three “AAA” batteries with fresh, alkaline batteries.

24

CONSUMER INFORMATION

Questions

Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us, toll-free, rather than return this product to the store. Usually we can solve the problem on the telephone or by sending you replacement parts.

In the United States, please call Fisher-Price®

Consumer Relations, toll-free at 1-800-432-KIDS,8 AM - 6 PM EST Monday through Friday.Hearing impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to:

Fisher-Price® Consumer Relations 636 Girard Avenue East Aurora, New York 14052

In Canada, please call 1-800-567-7724. Or, write to:

Mattel Canada, Inc. 6155 Freemont Blvd. Mississauga, Ontario L5R 3W2

Please include your name, address and daytime telephone number.

25

FCC NOTE

(United States Only)

Note: This equipment has been tested and found to com-ply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interferencein a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions,may cause harmful interference to radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or television reception,which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interfer-ence by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

ICES-003

(Canada Only)

This Class B digital apparatus complies with Canadian ICES-003.

26

WARRANTY

One Year (1) Limited Warranty (United States)

Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York 14052 warrants that RocketTM The Wonder Dog

is free from all defects in material and workmanship when used

under normal conditions for a period of one (1) year from the

date of purchase.

Should the product fail to perform properly, we will repair

or replace it at our option, free of charge. Purchaser

is responsible for shipping the product to Consumer

Relations at the address indicated above and for all asso-

ciated freight and insurance cost. Fisher-Price, Inc. will

bear the cost of shipping the repaired or replaced item to

you. This warranty is void if the owner repairs or modifies

the product. This warranty excludes any liability other than

that expressly stated above including but not limited to

any incidentai or consequential damages.

SOME STATES DO NOT ALLOW THE EXCLUSIONOR LIMITATION OF INCIDENTAL OR CONSE-QUENTIAL DAMAGES, SO THE ABOVE LIMITA-TIONS OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGALRIGHTS, AND YOU MAY ALSO HAVE OTHERRIGHTS WHICH MAY VARY FROM STATE TO STATE.

27

WARRANTY

One Year (1) Limited Warranty (Canada)

Mattel Canada Inc., warrants to the original consumer pur-chaser that this product will be free of defects in materialor workmanship for one (1) year (unless otherwise speci-fied in alternate warranties) from the date of purchase. If defective, return the product along with proof of thedate of purchase, postage prepaid to Mattel Canada Inc., Consumer Service, 6155 Freemont Blvd., Mississauga,Ontario L5R 3W2 for replacement with an identical toy or similar toy of equal or greater value according to avail-ability. This warranty gives you specific legal rights and you may also have other rights which vary from provinceto province. This warranty does not cover damage result-ing from accident, misuse, or abuse. Valid for productssold in Canada only.

Certificate of PedigreeOwner

Arrival Date

Male Female

Dog Name

Description of Homeland

I certify that this pedigree is true and correctto the best of my knowledge and belief.

Signature

Parents

Grandparents

Certificate of Pedigree

✃

Into Your Home

Come visit us at www.fisher-price.com

Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, NY 14052 U.S.A.©2000 Mattel, Inc. All Rights Reserved® and ™ designate U.S. trademarks of Mattel, Inc.

Questions? We’d like to hear from you.

Call: U.S. Toll Free 1-800-432 KIDSCanada 1-800-567-7724

Please save this manual for future reference.

The dog is not intended for use outdoors.

Batteries must be installed by an adult.

Requires three“D” (LR20) and one 9 volt(6LR61) alkaline batteries in the dogfor operation (all not included).

Requires three “AAA”(LR03) alkaline batteries in the P.P.T. for operation (not included).

For longest battery life, we recommend theuse of alkaline batteries in this toy.

You can expect approximately 6 hours of power with each fresh set of “D” (LR20)batteries (in the dog). We also recommendthe use of high capacity, rechargeable “D” batteries in the dog. High capacity “D” batteries can be purchased at mostelectronics stores.

Tool required for battery installation: Phillips Screwdriver (not included).

77806pr-0920Printed in China

rocket the wonder dog command manual...wake up (about 15 seconds). important! to conserve battery...

Documents