robustel gorugged r3000 release notes - start.m2m.dk · robustel gorugged r3000 release notes...
TRANSCRIPT
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 1 / 22
Robustel GoRugged R3000 Release Notes
NOTES
This release note will show details of the latest upgraded firmware compared with the previous one. Firmware
upgrade information about all versions is accumulated in this release note, so you can check history here.
This release note is applicable to R3000 series products with ROS, including R3000, R3000 Lite and R3000 Quad.
Note: APP V2.0.x only applies to V2.0.x firmware and App V3.x.x applies to V3.x.x firmware only.
----------------------------------------------------------------------------------------------------
VERSION V3.0.17
Release Date: Dec.7, 2018
Version Inherited: V3.0.16
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Remove the "Encrypt Secret Data" option in the page profile and encrypt the
password in the export profile by default
2 Added mandatory ppp dialing options (ME909 series, MU709 series, MU609
series, ME3630, EC25)
3 Log information with apn password generated during dialing is not displayed
by default.
4 Remove hardware flow control options from the serial port application
5 Added support for iptables netmap configuration in Firewall custom rules
6 GPS and serial data forwarding support domain name
7 R3000lite adds flash write verification to avoid possible flash write protection
problems
8 Firewall newly adds controls the VPN NAT traversal enable button (using this
function, the lan port cannot be configured as a class A address)
9 Added support for Quectal BG96 module
10 When the OpenVpn client's certificate does not have a password, the 'Private Key
Password' configuration is left blank. You can enter no characters.
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 2 / 22
BUG FIXED
Bug# Descriptions
1 Fixed the network registration problem of HL7588
2 Fixed the registration network problems caused by EHS6 module dual card
switch link
3 Fixed the verification problem of the aaa authenticate local account
4 Fixed the problem of the ipsec gateway could not run as a server when it was
empty or 0.0.0.0.
5 Fixed the defect of clish command line to view the information of user
management
6 Fixed the problem of snmp cannot get the board type oid
KNOWN BUGS & LIMITATIONS
Bug# Descriptions
1 App which cannot be compatible with V2.X.X, only can use App above V3.0.0
2 The local subnet of the IPSec tunnel is set to 0.0.0.0/0. The subnets on both
ends of the IPSec tunnel cannot communicate.
OTHERS
Index# Descriptions
1 UBOOT version: 3.0.0 and above
2 Platform version: Robustlink v.2.0.3 and above
----------------------------------------------------------------------------------------------------
VERSION V3.0.16
Release Date: Oct.12, 2018
Version Inherited: V3.0.14
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 3 / 22
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1
2
3
4
5
BUG FIXED
Bug# Descriptions
1 Fixed the defect of clish command line to view the information of user
management
KNOWN BUGS & LIMITATIONS
Bug# Descriptions
1 App that is not compatible with version V2.X.X, only apps with V3.0.0 and
above
OTHERS
Index# Descriptions
1 UBOOT version: 3.0.0 and above
2 Platform version: Robustlink v.2.0.3 and above
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 4 / 22
----------------------------------------------------------------------------------------------------
VERSION V3.0.15
Release Date: Aug.10, 2018
Version Inherited: V3.0.13
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Added a LGA encapsulate module to support R3000Lite
2 Under the mode of automatic apn, matching the apn of the Tele2 carrier
3 Added a special solution for message receiving from Japan telephone number
in HL7539 module
4 Optimized the prompt for helping in web page
5 Deleted the Robustlink option in Serial port page
BUG FIXED
Bug# Descriptions
1 Fixed the problem that cannot connect to ping after establishing GRE VPN
2 Fixed the problem that DO will not be triggered when the DI is beyond
counting in DIDO
3 Fixed the problem that the modem process reboots when the length of
message is too long
4 Fixed the problem that the storage is run out because of the connection
malfunction under the forwarding mode of TCP server
5 Fixed the bug that it appears multiple WLAN ports when adding static router
in web page under the mode of WIFI Client
KNOWN BUGS & LIMITATIONS
Bug# Descriptions
1 App that is not compatible with version V2.X.X, only apps with V3.0.0 and
above
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 5 / 22
OTHERS
Index# Descriptions
1 UBOOT version: 3.0.0 and above
2 Platform version: Robustlink v.2.0.3 and above
----------------------------------------------------------------------------------------------------
VERSION V3.0.14
Release Date: Aug.10, 2018
Version Inherited: V3.0.13
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Added a LGA encapsulate module to support R3000Lite
2 Under the mode of automatic apn, matching the apn of the Tele2 carrier
3 Added a special solution for message receiving from Japan telephone number
in HL7539 module
4 Optimized the prompt for helping in web page
5 Deleted the Robustlink option in Serial port page
BUG FIXED
Bug# Descriptions
1 Fixed the problem that cannot connect to ping after establishing GRE VPN
2 Fixed the problem that DO will not be triggered when the DI is beyond
counting in DIDO
3 Fixed the problem that the modem process reboots when the length of
message is too long
4 Fixed the problem that the storage is run out because of the connection
malfunction under the forwarding mode of TCP server
5 Fixed the bug that it appears multiple WLAN ports when adding static router
in web page under the mode of WIFI Client
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 6 / 22
KNOWN BUGS & LIMITATIONS
Bug# Descriptions
1 App that is not compatible with version V2.X.X, only apps with V3.0.0 and
above
OTHERS
Index# Descriptions
1 UBOOT version: 3.0.0 and above
2 Platform version: Robustlink v.2.0.3 and above
----------------------------------------------------------------------------------------------------
VERSION V3.0.13
Release Date: Jun.26, 2018
Version Inherited: V3.0.12
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Deleted the Robustlink option in Serial port page.
BUG FIXED
Bug# Descriptions
N/A
OTHERS
Index# Descriptions
N/A
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 7 / 22
----------------------------------------------------------------------------------------------------
VERSION V3.0.12
Release Date: May.8, 2018
Version Inherited: V3.0.11
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Periodically update GPS position to device status at every 10 seconds or so.
BUG FIXED
Bug# Descriptions
N/A
OTHERS
Index# Descriptions
1 UBOOT version: 3.0.0 and above
2 Platform version: Robustlink v.2.0.3 and above
----------------------------------------------------------------------------------------------------
VERSION V3.0.11
Release Date: Mar.16, 2018
Version Inherited: V3.0.10
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 EC25 module adds Band4 band.
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 8 / 22
BUG FIXED
Bug# Descriptions
1 Fixed the problem that HL Series Modules Sometimes Can't Read SIM.
OTHERS
Index# Descriptions
1 UBOOT version:3.0.0 and above
2 Platform version:Robustlink V2.0.3 and above
----------------------------------------------------------------------------------------------------
VERSION V3.0.10
Release Date: Feb.23, 2018
Version Inherited: V3.0.9
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Added device supports four DI ports function, the corresponding type is
R3000_S2391140.
BUG FIXED
Bug# Descriptions
N/A
OTHERS
Index# Descriptions
1 UBOOT version:3.0.0 and above
2 Platform version:Robustlink V2.0.3 and above
3 This firmware is not compatible with other firmware and only applies to
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 9 / 22
device model R3000_S2391140
----------------------------------------------------------------------------------------------------
VERSION V3.0.9
Release Date: Jan.26, 2018
Version Inherited: V3.0.7
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Added aes192 encryption algorithm item of IPSec.
2 Increased the max number of VPN (IPSec/GRE/OpenVPN) tunnel to at most 6.
3 Exceeded the size of R3000 NVM syslog log file and modified a single file to
5M.
4 The Remote IP Forwarding of firewall defaulted to on.
5 The link was compatible with NetMask 255.255.255.255 (HUAWEI modules
supported temporarily).
6 Integrated WiFi new driver. Adopted new WiFi implementation.
7 Improved USB automatic update, supported update of configuration files of
different names, verified before updating firmware version with the same
version number not updated.
8 Automatically reboot the device when run out of memory.
9 Improved cellular extra AT command sending processing, sent lowercase
command before registration and uppercase command after registration,
fixed the problem that “at” can’t be processed in the command.
10 Always allow new client access in the TCP mode of serial Port function.
11 EC25 module supported AT over Telnet.
12 Increased AT command debugging time to 3 minutes, and supported
AT+COPS=? command query.
13 Optimized firmware backup strategy. Firmware upgrade will not synchronize
in the backup partition, only when restart system after updating will the
primary partition synchronize with the backup partition.
14 Upgrade hardware of U disk to be compatible with bin and ruf formats.
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 10 / 22
BUG FIXED
Bug# Descriptions
1 Fixed the problem that time can’t be synchronized when system time is later
than the actual time.
2 Improved LP41 module. Fixed the problem that some modules can’t be
rebooted and the signal value was greater than 31 sometimes.
3 Fixed the problem that the default flow control status of RS232 was
inaccurate.
4 Fixed the problem that no GPS information was reported on RobustLink App.
5 Fixed the problem that SMS receiving was abnormal after EHS6 module
dialed.
OTHERS
Index# Descriptions
N/A
---------------------------------------------------------------------------------------------------
VERSION V3.0.8
Release Date: Dec.27, 2017
Version Inherited: V3.0.7
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Added DHgroup1encryption algorithm to IKE DH Group option and PFS Group
option of TPsec function respectively.
BUG FIXED
Bug# Descriptions
1 Fixed the bug where GPS function ignores 0 after the decimal point when
parsing data in version 3.0.7.
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 11 / 22
OTHERS
Index# Descriptions
1 UBOOT version:3.0.0
2 Platform version:Robustlink V2.0.3 and above
3 The R3000Quad automatic test only supports hardware version 1.1.0 or 1.1.0 or
above.
---------------------------------------------------------------------------------------------------
VERSION V3.0.7
Release Date: Dec.21, 2017
Version Inherited: V3.0.6
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Extended the max configurable entry of firewall configuration to 50, including
Whitelist Rules, Filtering Rules, Port Mapping and Custom Rules.
2 Updated dnsmasq to version 2.78, supporting min-cache-ttl configuration
options.
3 Compatible with UC20 module; support dial up, SMS, frequency selection of
locking network, and AT over Telnet features.
4 Added band, RSRP and RSRQ display of Cellular. This new feature is only
applied to HUAWEI serial modules, Sierra HL7549/HL7539 and ME3630
modules. (support Band status only)
5 User management parameters can be exported.
6 Private parameters are enciphered by default when export parameters.
7 When serial data forwarding is as TCP server, support 3 client ends to connect
with it simultaneously.
8 HE910D supports AT over Telnet feature.
9 Supported new character “!” on the user management page.
10 Supported new character “!” in the password of RobustLink App.
11 The USER light of R3000 series can be used to indicate WiFi status.
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 12 / 22
BUG FIXED
Bug# Descriptions
1 Fixed the bug that CLI couldn’t configure filtering rule of firewall.
2 Fixed the bug that time was not accurate after the device powered off since
version 3.0.3. It is only applied to R3000 series.
3 Fixed the bug that Sierra HL7xxx series failed to dial up in some countries.
4 Support display of SSID name with blanks in WLAN scanning result.
5 Fixed the bug that DHCP sometimes failed to gain IP when fix MC7544
module.
6 Fixed the bug that interval would not increase when RobustLink App was
reconnected.
7 Fixed the bug that status change couldn’t be triggered by DI.
OTHERS
Index# Descriptions
N/A
---------------------------------------------------------------------------------------------------
VERSION V3.0.6
Release Date: Nov.13 2017
Version Inherited: V3.0.5
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 After registration fails, AT command can be sent.
2 EHS6 modules fails to dial via private network APN.
3 Fixed the bug that ME3630 module couldn’t lock the network.
4 Optimized module’s initial process to solve slow dialup problem of some
modules.
5 Optimized the dialup process of HL7XXX family modules.
6 Compatible with MC7455 module.
7 Added whitelist in the firewall.
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 13 / 22
BUG FIXED
Bug# Descriptions
N/A
OTHERS
Index# Descriptions
N/A
---------------------------------------------------------------------------------------------------
VERSION V3.0.5
Release Date: Sept.25 2017
Version Inherited: V3.0.4
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
N/A
BUG FIXED
Bug# Descriptions
1 Failed to upgrade firmware if 3.0.4 had no SN.
2 Rtest failed to test R3000 Lite.
OTHERS
Index# Descriptions
N/A
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 14 / 22
---------------------------------------------------------------------------------------------------
VERSION V3.0.4
Release Date: Sept.14 2017
Version Inherited: V3.0.3
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Added ovpn_cert_get command for CLI, which enables Openvpn certificate to
be downloaded by URL. URL supports FTP, HTTP and HTTPS.
2 Optimized Openvpn and IPSec’s x509 certificate import method, thus, users
do not need to modify the name of the certificate before importing.
3 Optimized DHCP request policy, improving its speed to get IP address.
4 Fixed the problem that the user name of Super user could not be changed.
5 Added custom contents DI alarm triggered and DI alarm recovered.
6 The help that PPPoE’s MTU automatically minus 8 is displayed.
7 Updated Chinese language pack.
8 Fixed the problem that quad_serial_port_type OID was repeated with route
OID.
9 Modified the information of Digicomm OEM.
10 Added authentication mechanism for file configuration.
11 Corrected the SIM indicator.
12 Upgraded encryption algorithm of user name’s password to SHA512.
BUG FIXED
Bug# Descriptions
N/A
OTHERS
Index# Descriptions
N/A
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 15 / 22
---------------------------------------------------------------------------------------------------
VERSION V3.0.3
Release Date: Aug.7, 2017
Version Inherited: V3.0.2
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
YFXQD170725-01 Improve TAP function of Openvpn, enabling Tap to bridge with lan0.
Optimize WAN Up/Down event handler to avoid up/down event when
Ethernet cable is disconnected.
YFXQD170727-01 Add custom firewall rules, switch of console and status of firewall functions.
1 Add root authority access function.
2 Modify web’s upload limitation, supporting to import larger App.
3 Optimize ELS61-E dialup processing, changing method from PPP to DHCP.
4 The serial port is compatible with modbus ASCII gateway.
5 Synchronize time via GPS and send GPS data via serial.
6 Optimize RTC control.
7 Optimize module hot-plug control to fix HE910-D dialup failure.
8 Optimize mechanism of data traffic filter to solve the problem that CPU is
highly occupied in the rdd process when throughput is high.
9 Update IPSec source components to the latest version and support IKEv2
authentication method.
BUG FIXED
Bug# Descriptions
N/A
OTHERS
Index# Descriptions
1 UBOOT version: 3.0.0
2 Platform version: Robustlink V2.0.3 and later
3 Automatic testing of R3000Quad supports software version 1.1.0 and later
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 16 / 22
only.
---------------------------------------------------------------------------------------------------
VERSION V3.0.2
Release Date: May26, 2017
Version Inherited: V3.0.1
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Support serial port type switch by software in R3000Quad V2
2 Compatible with modules: EHS6 and ELS61
BUG FIXED
Bug# Descriptions
N/A
OTHERS
Index# Descriptions
1 UBOOT version: 3.0.0
2 Platform version: Robustlink V2.0.3 and later
3 Automatic testing of R3000Quad supports software version 1.1.0 and later
only.
---------------------------------------------------------------------------------------------------
VERSION V3.0.1
Release Date: Apr.1, 2017
Version Inherited: V3.0.0
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 17 / 22
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Compatible with new module HL7528
BUG FIXED
Bug# Descriptions
1
OTHERS
Index# Descriptions
1 UBOOT version: 3.0.0
2 Platform version: Robustlink v2.0.3 and later
---------------------------------------------------------------------------------------------------
VERSION V3.0.0
Release Date: 1st Apr. 2017
Inherit Version: V2.0.3
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Wi-Fi Feature Support
2 Changed independent App DDNS to the default feature of the system
3 Default parameter Customize Support
4 Parameter rollback Support
5 Add memory usage statistic
6 E-mail Notification supports TLS encryption transmission
7 Parameter configuration support all special characters
8 Default to enable PING detective and dual SIM card back up
9 Update the parameters of the device via USB port
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 18 / 22
10 Optimize the link switch policy, when both links are not available the
switching operation will be continue which is in order to confirm if the link is
recovery.
11 Optimize the link control policy. Under all back up mode, link switching takes
precedence over link redialing.
12 Delete “Aggressive Reset” parameter of Web page, and default to enable it in
system.
BUG FIXED
Bug# Descriptions
1 When set the APN before register network, router failed to register in some
4G network.
OTHERS
Index# Descriptions
1 UBOOT Version: 3.0.0
2 Platform Version: Robustlink V2.0.3 or above
---------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
VERSION V2.0.3
Release Date: 16th Nov. 2016
Inherit Version: V2.0.2
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Modify RobustVPN feature that the router will restart the system when it is
the first time to connect to RobustVPN or obtain the new network
information from RobustVPN.
2 Set WWAN1 as primary link and WWAN2 as backup link, router will switch to
WWAN2 when WWAN1 is unavailable and then try to switch back to WWAN1
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 19 / 22
at intervals.
BUG FIXED
Bug# Descriptions
N/A
OTHERS
Index# Descriptions
1 Hardware Version: R3000Standard_V1.2.1, R3000Lite_V1.3.2,
R3000LiteM_V1.0.0, R3000Quad_V1.1.0
2 UBOOT Version: 2.0.1
3 Platform Version: Robustlink V2.0.3 and above
---------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------
VERSION V2.0.2
Release Date: 18th Sept. 2016
Inherit Version: V2.0.1
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Compatible with MC7430 module
2 Support upload syslog to robustlink
3 Add remote ip option in Port Mapping, and support be access via VPN tunnel
4 NAT feature in Link Manager can be closed optionally
5 Switch back to the available primary link immediately under warm backup
mode
6 Login Protect feature can be closed by uploading configuration file
7 Add MAC/IP binding option in DHCP
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 20 / 22
BUG FIXED
Bug# Descriptions
718 Fix the problem with router will enter uboot mode after reboot, and solve the
firmware lost problem
883 Fix the problem with the MTU of lan0 in Robustlink is incorrect
893 Fix the problem with fail to access router when the IPSec local subnet was set
as 0.0.0.0/0
OTHERS
Index# Descriptions
1 Hardware Version: R3000Standard_V1.2.1, R3000Lite_V1.3.2,
R3000LiteM_V1.0.0, R3000Quad_V1.1.0
2 UBOOT Version: 2.0.1
3 Platform Version: Robustlink V2.0.3 and above
---------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
VERSION V2.0.1
Release Date: 18th May. 2016
Inherit Version: V2.0.0
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 Optimized driver of Sierra modem
BUG FIXED
Bug# Descriptions
606 Fix the problem that MC7304/MC7354 module cannot dial up successfully and
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 21 / 22
connect to the internet
OTHERS
Index# Descriptions
1 Hardware Version: R3000Standard_V1.2.1, R3000Lite_V1.3.2,
R3000LiteM_V1.0.0, R3000Quad_V1.1.0
2 UBOOT Version: 2.0.0
3 Platform Version: Robustlink V2.0.3 and above
----------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------
VERSION V2.0.0
Release Date: 18th Mar. 2016
Inherit Version: N/A
ENHANCEMENT & NEW FEATURES
Ref# Descriptions
1 First release version of ROS firmware
BUG FIXED
Bug# Descriptions
N/A
OTHERS
Index# Descriptions
1 Hardware Version: R3000Standard_V1.2.1, R3000Lite_V1.3.2,
R3000LiteM_V1.0.0, R3000Quad_V1.1.0
2 UBOOT Version: 2.0.0
Robustel GoRugged R3000 Release Notes
RT_Release Notes_R3000 Dec.24, 2018 22 / 22
3 Platform Version: Robustlink V2.0.3 and above
----------------------------------------------------------------------------------------------------