robot spec defense techs

[email protected] www.defensetechs.com

Andros Wolverine - Outdoor, All-Terrain Workhorse

Heavy-duty, all-terrain robot brings superior strength and manipulator dexterity to your longest, most intense missions.

Features

Color surveillance camera with light, zoom, pan/tilt,

216:1 total zoom (26x optical/12x digital)

Manipulator arm with seven degrees of freedom ensures optional dexterity

Single-module electronics for quick field replacement Switchbox for walk-along control Four, 12-volt batteries for extended run-time Optional track system Six individually powered wheels with lock-out hubs

for free-wheeling

Vehicle Data / Communication Links

The three data links available for operator control of the

vehicle are:

• Fiber-Optic Cable - deployed from the vehicle

• Radio Control (wireless)

• Hard tether cable

• Optional tracks allow for traversing large obstacles and operating in extremely harsh

conditions such as marshes, swamps and snow.

• Dual accessory mounts on arm allow simultaneous, multiple weapon/sensor deployment.


Dimensions Height: 69", 40" with pan/tilt/zoom camera extender removed Width: 29" Length: 58" Ground clearance: 5.5" Weight 810 lbs Mobility Method: 6 wheels with individual drive motors, Removable tracks Slope: 45¾ Speed: 0 to 2 mph Traverse: Openings up to 19" Turning: Within the length of the vehicle Manipulator • Variable speed control for precision • Dual-sided, quick-change accessory mounting system

Front Drive: • Color fixed focus from 12" to 25'. Auto Iris Optional Weapons Camera and laser sighting systems available. Audio 2-Way Audio System with weatherproof speaker and microphone mounted on the robot Electrical 7 Isolated firing circuits: 24VDC Power Supply: 24VDC spiral-cell Battery Pack Battery charger 1/4 Turn Connectors: For easy connect, disconnect Data Links: Interchangeable Fiber Optic Cable Reel, RF system, or Hard-line cable reel system

Torso Rotate ...... Shoulder ............ Elbow ................ Wrist ................. Wrist extend ...... Grip rotate ......... Gripper ..............

Lifting ...............

Vertical reach ..... Horizontal reach ..

Audio Visual Cameras Surveillance:

+/- 170° from center 210° 210° 210° 8" 360° continuous 0" to 12" open/close 0 to 50 lbs pressure 100 lbs at 18" 60 lbs at full extension 109" 71" from the front of the vehicle

Environmental • Sealed weather resistant enclosure • Wet or dry surfaces • All terrain Operator Control Unit (required) • Removable switchbox for direct connection

to the robot • 15" LCD monitor with daylight readable,

Anti-Glare Screen • Picture in Picture display with camera selection switch

• Graphics display Vehicle and Console battery condition, Camera setup functions, and Sensor Feedback

• Video and audio output for event recording and optional headset display

• Color Camera with Low Light switching Capability • 72:1 extra low light color pan/tilt/zoom with full

360° continuous pan 180° tilt • Auto/Manual Focus and Iris • 80 watt adjustable halogen light with detachable

IR lens • Motorized camera extender Arm: • Color camera with Auto/Manual focus • Auto/Manual Iris • Manually adjustable tilt • 80 watt adjustable halogen light • Manual 72:1 Zoom

• Joystick control for easy navigation • Removable Key Firing Circuit System • Heavy duty, portable, weather resistant • Includes 50 amp-hr. 12VDC battery and

110VAC smart charger/power supply • Power Options: 50 amp-hr. 12 VDC battery

with Charger, AD and DC Power Cords • Microphone, speaker, and volume control • 38 lbs, 10" x 23" x 18" (H/W/D) * One of the control link options must be purchased


Accessories

Item

Options / Accessories Description

Control

Tabletop Controller Assembly Weather-resistant operator control station Hand Controller Assembly Walk-along operation of articulators and drive

Fiber Optic Cable Reel Assembly (2000 ft.)

Foot Switch Assembly (Fiber Take-Up)

Motorized robot-mounted fiber optic cable take- up reel, military grade fiber, and controller interface box Foot-controlled fiber optic take-up switch

Spare Spool of Fiber Optic Cable Additional spool of military grade fiber optic

cable

Cable Reel Assembly (330 ft.) Required for Radio Jumper Box

Radio Control Assembly (5 watt) Radio transceiver system and antenna package for control and AV transmission

Radio Jumper Box Assembly Allows the control side antenna pack to be

moved up to 330' closer to operating location

Audio/ Video

Camera Pan/Tilt Assembly 360-degree rotation, increases depth

perception and target clarity Camera Sighting Kit Assembly Enhances accuracy of all weapons/disruptors

used Laser Assembly Aiming device

Laser Filter Assembly Enhances ability to see laser in bright light,

attaches to weapons camera

High-Intensity Light Assembly High lumen light with built-in power supply (includes charger)

Headset Assembly LCD headset, with audio

Tools PAN Disrupter Mount Assembly Supports a single PAN distrupter

Dual Pan Distrupter Mount Assembly

Supports 2 PAN distrupters, configured to stack the PANs vertically

Shock Tube Initiator (1, 2, 4 or 6 channel)

Supplies firing point(s) for shock tube initiation (1, 2, 4 or 6 firing points)

Shotgun A modified 12 gauge Franchi 612 for use as an

entry or breaching tool, used with mount assembly

Charge Dropper Assembly (330 ft.)

330 feet of firing wire

Gas Dispenser Mount Assembly For use with the Guardian OC dispenser

SL6 Mount Assembly For use with the L6 or L8 37mm or 40mm

launcher


High-Intensity Light Assembly High lumen light with built-in power supply (includes charger)

Striker Mount Assembly Supports the Penn-Arms Striker 12

Striker 12 Shotgun Penn-Arms Striker 12, for less-than-lethal

rounds

Window Breaker Assembly Spring-loaded punch in a machined aluminum block

Claw Assembly Extends gripper opening 2", used to open some

packages

Cable Cutter Assembly Heavy-duty cutter assembly, attaches to gripper fingers

Boot Banger Assembly Easily deploys Boot Banger assembly from a

gripper-mounted support

Cordless Circular Saw Assembly 24v cordless circular saw, has its own power supply, held in gripper

Reciprocating Saw Assembly 24v cordless reciprocating saw, has its own

power supply, held in gripper

Cordless Drill Assembly 24v cordless drill, has its own power supply, held in gripper

Sensors

APD2000/MULTIRAE Detector Mounting Kit

Supports APD2000 and MULTIRAE detectors

X-Ray Assembly (fits X-Ray systems)

Operational mounting for X-Ray systems, must be robot-ready modified from manufacturer

Real-Time X-Ray Assembly (fits FoxRay only)

Operational mounting for FoxRay, must be robot-ready modified manufacturer

Contamination Smear Assembly

Attaches to gripper, 6 self-centering pods for litmus paper, all aluminum

Misc. Spare Vehicle Battery

Assembly Assembly that allows quick change of battery packs for extended operations

Maintenance

Emergency Spare Parts Kit Battery, selected electronics, gaskets, screws,

bearings

Chassis Service Kit Service parts, gaskets, screws

Overhaul Kit Includes wear parts for robot

One-Year Extended Service Contract

Repair warranty after the 12-month initial warranty

Operation and Maintenance Training

2 1/2 days of training, covers operation, maintenance and troubleshooting

Service/Tune-up Training 3 1/2 days of training, up to 7 persons, more

in-depth than O&M training


F6A - The Industry’s Most Versatile Platform

The Remotec ANDROS F6A is the most versatile, heavy-duty robot on the market. Speed and agility unite to make it your first choice for a wide range of missions.

Features

Color surveillance camera with light, zoom, pan/tilt Surveillance camera with image stabilization - 216:1 total zoom

(26x optical/12x digital) Stationary arm camera - 40:1 total zoom (10x optical/4x digital) 24-inch camera extender Multiple-mission tool/sensor mounts with plug-and-play

capabilities Gripper with continuous rotate Manipulator arm's seven degrees of freedom ensure optimum

dexterity Quick-release pneumatic wheels for rapid width-reduction, no

tools required Patented articulating tracks allow for traversing ditches,

obstacles and the roughest terrain


The three data links available for operator control of the ANDROS

vehicle are:

• Fiber-optic cable - deployed from the vehicle

• Radio control (wireless)

• Hard-tether cable

• Patented articulating tracks allow for ease in stair climbing

• Increased height to meet mission requirements

• Dual accessory mounts on arm allow simultaneous, multiple weapon/sensor deployment


HD-1 Compact, Lightweight Platform

The Remotec HD-1 is the newest member of the ANDROS family. Faster, lighter, versatile, and rugged - speed and agility unite to make it a top choice for a wide range of missions.

Features

210° Shoulder Joint; 180° Wrist Color pan/tilt surveillance camera, 216:1 total zoom Color drive camera, B/W rear camera, arm mounted light 24-inch camera extender Up to 4 hours mission dependent 72" Max. Gripper Height 6" Gripper with 360 degree rotation, weapons with gripper

capable Dual disrupter mount Lifts up to 30 lbs. at full extension Multiple-mission tool/sensor mounts with plug-and-play

capabilities Ability to reach under automobiles 4.3+ miles per hour Maximum mobility through all types of terrain including sand, mud, and snow Easily manoeuvres through openings up to 26" and over obstacles 8" tall Dimensions: 30" tall x 26" wide x 39" long (with arm parked) Weight: 200 lbs. without Comm. Link; <140 lbs. with Quick Release Arm removed Easy access to all components for troubleshooting

Supports most Remotec standard options


The three data links available for operator control of the ANDROS vehicle are:

• Fiber-optic cable - deployed from the vehicle

• Radio control (wireless)

• Hard-tether cable


Mini-ANDROS II - Compact, Capable, Two-Man-Portable Platform

The Remotec Mini-ANDROS II is a full-featured, entry-level robot for hazardous duty operations. This small package packs twice the functionality of comparable robots into an easily transportable, low- maintenance body.

Features

Two-meter telescoping arm with four degrees of freedom

Color surveillance camera

Two-way audio

Fold-down 18-inch camera extender

Single-module electronics for quick field replacement

Quick free-wheel option

Patented articulating tracks


The three data links available for operator control of the ANDROS vehicle are:

• Fiber-Optic Cable - deployed from the vehicle

• Radio Control (wireless)

• Hard tether cable

• Articulating tracks allow for increased height and ease in climbing stairs, obstacles.


Dimensions Height: 27" with PTZ camera extend folded down Width: 24.5" Length: 53" Ground clearance: 3"

Weight 225 lbs

Mobility Method: Articulated tracks and removable wheels Slope: 45û including stairs Speed: 0 to 1.1 mph Traverse: Openings up to 21" and obstacles up to 16" tall

Manipulator • Variable speed control for precision

Audio 2-Way Audio System with weatherproof speaker and microphone mounted on the robot Electrical 2 Isolated firing circuits: 24VDC Power Supply: 24VDC - gel cell battery pack Battery charger 1/4 Turn Connectors: For easy connection, disconnect Data Links: Interchangeable Fiber Optic Cable Reel, RF system, or Hard-line cable reel system Environmental • Sealed weather resistant enclosure • Wet or dry surfaces • All terrain

Shoulder ............ Wrist ................. Arm extend ...... Grip rotate ......... Gripper ..............

Lifting ...............

Vertical reach ..... Horizontal reach ..

Audio Visual Cameras Surveillance:

60° 90° 36" 360° continuous 0" to 12" open/close 0 to 50 lbs pressure 45 lbs at 18" 15 lbs at full extension 70" 44"

Operator Control Unit (required) • Removable switchbox for direct connection

to the robot • 15 in. LCD monitor with daylight readable,

Anti-Glare Screen • Picture in Picture display with camera selection switch

• Graphics display Vehicle and Console battery condition, Camera setup functions, and Sensor Feedback

• Video and audio output for event recording and optional headset display

• Color Camera with 6:1 zoom, 360° pan and 180° tilt • Optional low light kit available • 80 watt adjustable halogen light Arm: • B & W low light with fixed focus • Auto Iris, manually adjustable tilt

Front Drive: • B&W low light fixed focus; Auto iris

• Joystick control for easy navigation • Removable Key Firing Circuit System • Heavy duty, portable, weather resistant • Includes 50 amp-hr. 12VDC battery and

110VAC smart charger/power supply

• Microphone, speaker, and volume control • 38 lbs, 10" x 23" x 18" (H/W/D) * One of the control link options must be purchased


Accessories

Item

Options / Accessories Description

Control

ANDROS Hand Controller Assembly Fiber Optic Cable Reel Assembly (1200 ft.) Foot Switch Assembly (Fiber Take-Up) Spare Spool of Fiber Optic Cable Cable Reel Assembly (330 ft.) Radio Control Assembly (5 watt) Radio Jumper Box Assembly Vehicle Power Supply Assembly (120, 240 VAC) ANDROS Tabletop Controller Assembly

Allows walk-along operation of articulators and drive

Motorized robot-mounted fiber optic cable take-up reel, military grade fiber, and controller interface box

Foot-controlled fiber optic take-up switch

Additional spool of military grade fiber optic cable

Data link between controller and robot, Required for Radio Jumper Box and AC power supply

Radio transceiver system and antenna package for control and AV transmission

Allows the control side antenna pack to be moved up to 330' closer to operating location

Allows continuous operation of vehicle with AC power Weather-resistant operator control station

Audio/ Video

Laser Assembly Aiming device Headset Assembly LCD headset, with audio Low Lux Camera Kit Allows operation in low-light areas

PAN Disrupter Mount Supports a single distrupter (Pan,


Tools Assembly Royal Arms or Neutrex 20mm) Shock Tube Initiator (one channel)

Supplies a firing point for shock tube initiation

Shotgun A modified 12 gauge Franchi 612 for use as an entry or breaching tool, used with mount assembly



Gas Dispenser Mount Assembly

For use with the Guardian OC dispenser

SL6 Mount Assembly For use with the L6 or L8 37mm or 40mm launcher

High-Intensity Light Assembly

High lumen light with built-in power supply (includes charger)

Striker Mount Assembly

Supports the Penn-Arms Striker 12

Striker 12 Shotgun Penn-Arms Striker 12, for less-than- lethal rounds



Contamination Smear Assembly

Attaches to gripper, 6 self-centering pods for litmus apper, all aluminum

Camera Sighting Kit Assembly

Enhances accuracy of all weapons/disruptors used

Boot Banger Assembly

Easily deploys Boot Banger assembly from a gripper-mounted support

Laser Filter Assembly Enhances ability to see laser in bright light, attaches to weapons camera

Window Breaker Assembly

Spring-loaded punch in a machined aluminum block

Claw Assembly Extends gripper opening 2", used to open some packages

Cable Cutter Assembly

Heavy-duty cutter assembly, attaches to gripper fingers


Sensors X-Ray Assembly (fits Golden X-Ray systems)

Operational mounting for Golden X- Ray systems, must be robot-ready modified

Misc. Spare Vehicle Battery

Assembly

Assembly that allows quick change of battery packs for extended operations

Maintenance

Spare Parts Kit Battery, selected electronics, gaskets,

screws, bearings

Maintenance Kit Service parts, gaskets, screws Overhaul Kit Includes wear parts for robot

Small Field Service Kit

Large Field Service Kit

One-Year Extended Service Contract

Operation and Maintenance Training

Service/Tune-up Training

www.defensetechs.com

[email protected]

Includes spare fiber optic spool, vehicle battery, switchbox cable and maintenance kit

Recommended for fleet maintenance Repair warranty after the 12-month initial warranty 2 1/2 days of training at REMOTEC, covers operation, maintenance and troubleshooting

3 1/2 days of training at REMOTEC, up to 7 persons, more in-depth than O&M training

robot spec defense techs

Documents