rmc arch may08:rmc template01 - rigidized metals . patterns 5wl
TRANSCRIPT
architectural products
RIGIDIZED® DEEP TEXTURED
H I G H P E R F O R M A N C E
A R C H I T E C T U R A L M E T A L S
EXCEPTIONAL FINISHES AND
CUSTOM FABRICATED PRODUCTS
ww
w.r
igid
ized
.co
m
RIGIDIZED® METALS ARE A GREAT MARRIAGE OF BEAUTY AND UTILITY
ABOVE/BELOW RIGIDIZED® PATTERN 6.WL® COLUMN COVERS AND WALL PANELS MIAMI INTERNATIONAL AIRPORT : SOUTH TERMINAL : CONCOURSE JARCHITECT : BORRELLI & ASSOCIATES ARCHITECTS PLANNERS, P.A.MATEU, CARRENO, RIZO & PARTNERS, INC. : A JOINT VENTURE
ABOVE CUSTOM KITCHEN BACKSPLASHES AND COUNTERTOPS FABRICATED BYRIGIDIZED® METALS CORP.
R I G I D I Z E D ® M E T A L S A R C H I T E C T U R A L P R O D U C T S
what we do:
we texture metals.DEEP TEXTURED METALS KNOWN WORLD-WIDE AS “RIGIDIZED” METALS:
■ defy dents due to increased impact resistance.
■ resist scratches - reduced surface contact area results in fewer scratches.
■ reduce “oil canning” - patterned finishes improve optical flatness.
■ save money - increased durability provides long term cost savings.
■ save weight - increased strength allows in the use of lighter gauges.
■ control reflections - patterns dissipate light and eliminate glare.
we finish metals.DRAMATIC METAL FINISHES INCLUDE:
■ powder coated and highlighted stainless steel.
■ stunning colored stainless steel.
■ low reflectivity matte finish stainless steel.
■ “coined” linen, squares and sand-tex stainless steel.
■ vibration non-directional polish stainless steel.
■ random swirl stainless steel.
■ bead blasted stainless steel.
we fabricate metals.WE MANUFACTURE:
■ wall panel and cladding systems.
■ counter tops and integrated sinks.
■ backsplashes.
■ metal faced tiles.
■ custom metal fabrications.
we supply metals.WE SELL RIGIDIZED® METALS TO MANUFACTURERS OF:
■ building exteriors.
■ elevator interiors and doors.
■ column covers.
■ restroom partitions.
■ handrails and railings.
■ custom metal fabrications.
www.rigidized.com 1
R I G I D I Z E D ® M E T A L S
we texture metals : deep textured patterns
■ 5.WL®
■ 4.LB
■ 2.FL ■ 6.HC
■ 1.NA®■ 60.LTH
■ 1.RL
■ 6.WL®
■ 3.ND
■ 2.WL®■ 1.CS
■ 1.SLG
■ 6.SL ■ 1.HM■ 7.DL
■ RTP
■ SAND-TEX
■ 1.UN
■ LINEN
■ RSS 3
PATTERNS MAY NOT BE SHOWN ACTUAL SIZE.
36”WIDE
48”WIDE
60”WIDE
2
WE BEGIN THE VALUE ADDED PROCESS OF TEXTURIZING OR “RIGIDIZING” with ordinary sheet metalsincluding stainless steel, aluminum, copper, brass and steel. The “Rigidizing “ process strengthens sheet metalwhich increases impact resistance. Rigidized® Metals also control reflections thereby hiding scratches and eliminat-ing unwanted oil-canning. Textures are manufactured 14 different widths, lengths and gauges. Please refer to backcover for more information.
Rigidized® metals are used for elevators, walls, floors, ceilings, columns. restroom partitions and countless applications where metallic beauty and long-term durability are important to reducing maintenance costs.
■ SQUARES
RIGI-BUMP BACKSPLASH
RB.3® HIGHLIGHTED IN RED RB.5® KNURL RB.9® KNURL
RB.1® 1.0˝ FLAT TOP RB.2® .750˝ DOME TOP RB.3® 1.375˝ FLAT TOP RB.4® .875˝ FLAT TOP
RB.5® .375˝ DOME TOP RB.6® .250˝ DOME TOP RB.7® .750˝ DOME TOP RB.8® 1.5˝ DOME TOP
RB.24® 1.0˝ DOME TOPRB.9® .625˝ FLAT TOP RB.21® 1.5˝ FLAT TOP RB.22® .250˝ FLAT TOP
we finish metals : textured : RIGI-BUMP®
RIGI-BUMP® CUSTOM ARCHITECTURAL PATTERNS offer unique three dimensional effects in metal. They are available in a wide selection of patterns including custom designs, metals, gauges, colors and finishes. Sheet widths up to 60˝ and lengths up to 144 .̋
RIGI-BUMP® IS AVAILABLE IN ALL FINISHES AND COLORS.
“KNURLED” RIGI-BUMP® IS SUITABLE FOR FLOORING.
3
R I G I D I Z E D ® M E T A L S
we finish metals : finishes & colors
#8 MIRRORBRIGHT ANNEALED MATTERANDOM SWIRL
2B & HIGHLIGHTED IN 2.FL SPECULAR ALUMINUM
MUNTZ SATINMILL FINISH BRASS BRASS SATIN FINISH MUNTZ MILL
PATTERNS MAY NOT BE SHOWN ACTUAL SIZE.
Brass American Yellow is 33% Zinc and 67% Copper, whereas Muntz is 40% Zinc and 60% Copper. The difference between the two being that Brass is more yellow in color and Muntz is darker and more corrosive resistant.
4
THE SELECTION AND SPECIFICATION OF RIGIDIZED® SHEET METAL PRODUCTS begin with metal type (stainless, aluminum, etc), then finish(satin, mirror, etc) and lastly pattern (5.WL, 6.WL etc). We offer several standard and custom finishes to enhance the beauty and performance ofproducts made from RIGIDIZED®. See it all come together: Combine Metal, Finish and Pattern Color.
A B C
SELECT METAL, FINISH, COLOR PATTERN
+ = NOTE: Not all RIGIDIZED® finishes are, patterns and colors can be combined. Please phone our sales staff for availability.
HAIRLINE#4 SATIN #3 SATIN
RND VIBRATION
BRIGHT BEAD BLAST MILL FINISH ALUMINUM
MILL FINISH COPPER
DULL BEAD BLAST
STANDARD AND CUSTOM FINISHES INCLUDE:
BLUE MIRROR
TI GOLD #4 SATIN
DELAWARE IN BLACK RICHMOND IN BLACK
ELMWOOD IN BLUE
ALLEN IN BLACK
VIRGINIA IN BLUE MIRROR
NIAGARA IN GRAY
NOTTINGHAM IN BRONZE
COBBLESTONE IN BLACK
ARLINGTON IN BLUE MIRROR MIDDLESEX IN BLUE MIRROR
we finish metals : finishes & colors
*PATTERNS MAY NOT BE SHOWN ACTUAL SIZE..*IMAGES MAY NOT ACCURATELY REPRESENT ACTUAL COLOR. PLEASE ORDER SAMPLE. 5
WE OFFER TWO TYPES OF COLORING ON STAINLESS STEEL: Titanium nitride coloring is an extremely hard. inert, thin, transparent molecularbonded ceramic coating that protects and beautifies stainless. TiNi colors include golds, bronzes, blues and blacks. Powder coatings are extremely durableelectronically charged and baked on polyurethane enamels. Powder coating colors include RAL colors, transparencies and special textured finishes. The highlighting process is sanding off the tops of RIGIDIZED® textures and can be applied to all colored and powder coated RIGIDIZED® textures.
CO
LOR
ED/P
AIN
TED
& H
IGH
LIG
HTE
DTI
TAN
IUM
NIT
RID
E C
OLO
RED
STA
INLE
SS S
TEEL
*IMA
GES
MAY
NOT
ACC
URAT
ELY
REPR
ESEN
T A
CTUA
L CO
LOR.
PLE
AS
E OR
DER
SA
MPL
E.
TI ROSE GOLD #4 SATIN TI COFFEE #4 TI BRONZE #4 SATIN TI BLACK #4 SATIN
TI GOLD HAIRLINE TI ROSE GOLD HAIRLINE TI COFFEE HAIRLINE TI BRONZE #4 HAIRLINE TI BLACK HAIRLINE
TI GOLD MIRROR TI ROSE GOLD MIRROR TI COFFEE #8 TI BRONZE #8 TI BLACK #4 SATIN
BLUE SATIN TI COFFEE SANDBLAST TI BRONZE BEADBLAST TI BRONZE VIBRATION
R I G I D I Z E D ® M E T A L S
we fabricate metals : quilt pattern backsplashes
CUSTOM BACKSPLASH IN HARLEQUIN PATTERN
3.QLT®
DIAGONAL SQUARE DIAMOND
HARLEQUIN 3.978˝ squares5.625˝ point to point
CHECKERBOARD MOSAIC3˝ squares 4.25˝ point to point
3.978˝ squares, 5.625˝ point to point
3.978˝ squares 5˝ high point to point [vertical],2.435˝ point to point [horizontal]
3.978˝ squares 5˝ high point to point [vertical],2.435˝ point to point [horizontal]
Rigidized® quilt patterns areoffered in various finishes including two-tone embossed.
PATTERNS MAY NOT BE SHOWN ACTUAL SIZE.6
we fabricate metals : custom-fabricated
BACKSPLASHES AND WALL CLADDING SYSTEMS
CUSTOM BACKSPLASH IN MOSAIC PATTERN
RIGIDIZED® WALL CLADDING AND BACKSPLASHES are easy to install because they are made to fit perfectly with your exact specifications. They are installed in minutes withtwo-sided tape and construction adhesive. Trim strips and corner mouldings complete theeasy installation for a professionally finished job. Our engineering staff creates fabricationdrawings from your sketches to insure proper fit.
7
PATTERN 1.CS IN COPPER #4 FINISH STAINLESS STEEL
TRIM STRIPS AND MOULDINGS
AB
C
D
A
B
C
D
A OUTSIDE CORNER B DIVIDER BAR
C “J” MOULDING D INSIDE CORNER
A B C1/16” 1-1/4” 1/2”
A B C5/16” 1/16” 3/4”
R I G I D I Z E D ® M E T A L S
we fabricate metals : custom metal panelsfor interior and exterior applications
WALL PANEL SYSTEMSRIGIDIZED® PANEL SYSTEMS offer an easy approach to specifying RIGIDIZED® durable and decorativemetals. our wall panel systems are designed to meet the needs of high impact environments and decorative spaces alike. Our metal panels are formed to your specifications and are hung with easy to install demountable “Z” clip system. However, don’t expect to replace a RIGIDIZED® deep texturedmetal panel because they are engineered to last for decades.
PANEL DESIGNS INCLUDE [AND ARE NOT LIMITED TO]:
■ PAN FACE PANEL Suitable for interior applications, the pan face panel has a formed pan that is laminated to the core material and a backer sheet that provides structural balance, strength and a suspension system platform.
■ PAN-IN-PAN PANEL Suitable for interior and exterior applications, the pan-in-pan system has a slightly smaller backer pan that seals the core material inside the panel. The backer pan provides superior structural balance and strength.
■ HAT CHANNEL PANEL Suitable for both interior and exterior walls, hat channel panels do not have a core, rather a hat channel that attaches to the pan face and supports the suspension system.
8
PAN SYSTEM PAN-IN PAN SYSTEM
PANEL FACE AND BACKER METAL THICKNESS FINISHES
■ STAINLESS STEEL .024” - .120” ALL AVAILABLET304, 316 & 430
■ ALUMINUM .025” - .125” MILL, CLEAR, SATIN ANODIZED3003 & 5005 ALLOYS AND SPECULAR
■ BRONZE/MUNTZ .020” - .090” ALL AVAILABLE220 COMMERCIAL BRONZE280 MUNTZ
■ COPPER .020” - .090” ALL AVAILABLE
■ STEEL .024” - .120” ALL AVAILABLE
MATERIALS AND FINISHES
RIGIDIZED® WALL PANELS are made from nearly all metals, finishes and textures. Panel face gauge selection is critical to durability. We recommend a minimum of 20 gauge for RIGIDIZED® deep textured face materials and 18 gauge for untextured surfaces. The added strength of RIGIDIZED® patterned metal allows for use of lighter gauges while maintaining substantial impact resistance.
R I G I D I Z E D ® M E T A L S A R C H I T E C T U R A L P R O D U C T S
9
OPEN CORNER“NOTCH & FOLD” CORNER
WELD & POLISH
FORMED
CORNERS, REVEALS AND JOINTS CORNERSBeautifully finished corners are the hallmark of a superior quality panel manufacturer. Corners exemplify the attention to detail and pride in architectural panel construction. In the industry there are typically two types of corner offered: open and welded. Not unlike our RIGIDIZED®panel faces, our exclusive formed corner is anything but typical. RIGIDIZED® exclusive formed corners are revolutionary because they require no notching or welding, making them perfect for colored and painted surfaces where retouchingis not an option.
Formed corners are a feature of our lightweight aluminum honeycomb core panel. RIGIDIZED® 20 gauge panels boast the same impact resistance as panels made from 16 gauge ordinary sheet metal, which istwice as thick. Cutting panel face material in half greatly reduces raw material costs and consumption. A formed corner RIGIDIZED® panel offers heavy-duty performance in a lightweight panel with a sealed corner, typically only available in heavier gauges.
Welded corners are used with heavier gauge panels where corners need to be sealed for moisture or aesthetic reasons.
Open corners called notch and fold corners, are a popular choice for interior applications where moisture is of little concern.
RIGIDIZED® PANEL CORE MATERIALS
ALUMINUM HONEYCOMB MEDIUM DENSITY FIBERBOARD
PLYWOOD ALUMINUM BACKER HAT CHANNELS
■ ALUMINUM HONEYCOMB 1/4” TO 1”
■ MEDIUM DENSITY FIBERBOARD 1/2” TO 1”
■ PLYWOOD 1/2” TO 3/4”
■ HAT CHANNEL 1/2” TO 2”
PANEL SIZESWIDTH HEIGHT
STAINLESS STEEL 59” 143”
ALUMINUM 47” 143”
COPPER/BRONZE 47” 143”
R I G I D I Z E D ® M E T A L S
10
DEMOUNTABLE “Z” CLIP PANEL SUSPENSION SYSTEM
MADE FROM EXTRUDED ALUMINUM, “Z” clips are the most popular choice of professional installers because they install in minutes and are a terrific value. “Z” clipsare available in a wide variety of widths and lengths, so there’s a “Z” cup for nearly allpanel installations.
Simply attach the wall “Z” clip (A) to wall surface (B) and drop in the factory attached panel clip (C) and panel assembly (D).
Assembly details and 3-part CSI specifications available at www.rigidized.com.
AB
CD
REVEALS, JOINTS AND CORNERS
BUTT JOINTREVEAL JOINT
REVEAL JOINT PANELS SHOWN IN 304 STAINLESS STEELWITH NON-DIRECTIONAL POLISH
BUTT JOINT PANELS SHOWN IN BRONZE COLOREDSTAINLESS STEEL, PATTERN 1.CS
Options for where panels meet include a reveal joint and a butt joint. the reveal joint panel system uses metal strips or channels mounted to drywall and“Z” clips are cut and fastened for suspension. Corners are clad with corner panels or angels.
R I G I D I Z E D ® M E T A L S A R C H I T E C T U R A L P R O D U C T S
11
CLEAR SATIN ANODIZED ALUMINUM WALL PANELS ABOVE DAMAGE RESISTANT RIGIDIZED® 6.WL® STAINLESS PANELS. PANELSMANUFACTURED WITH LIGHTWEIGHT HONEYCOMB CORE AND HUNG WITH “Z” CLIP SYSTEM. MADE BY RIGIDIZED® METALS CORP.
PROJECT: MIAMI INTERNATIONAL AIRPORT: SOUTH TERMINAL.
ARCHITECT: BORRELLI ASSOCIATES ARCHITECTS PLANNERS, PA,MATEU, CARREND, RIZO & PARTNERS,INC, A JOINT VENTURE.
PATTERN 1.BB AND 2.CSFINISH: 304SS #4
WAINSCOTING SYSTEMSRIGIDIZED® METAL’S EXCLUSIVE TONGUE & GROVE
BEAD BOARD WAINSCOTING SYSTEM is easy to installbecause the 8˝ wide wood-backed planks are interlocking. Pre-drilled panels, corner mouldings and custom width end panels complete the system.
PATTERN 1.BB IS AVAILABLE IN ALL ALLOYS AND FINISHES.
PATTERN 1.BBFINISH: SAND-TEX
descriptionCustom fabricated column covers with vertical reveals and horizontal splice and reveal joints.
column cover system components■ Formed Rigidized® Metals■ Brackets to floor and ceiling - formed steel■ Vertical support strut - 12 gauge steel
material options■ 18 gauge to 13 gauge stainless steel■ .050” to .120” aluminum sheet■ .062” to .125” copper, brass, bronze and muntz
finish options■ Rigidized® Deep Textured Architectural Metals■ #4 Brushed - Satin and #8 Polished Stainless■ #4 Brushed - Satin Aluminum■ Copper - mill finish■ Random swirl and Non-directional Finish Stainless■ Colored Stainless Steel■ Embossed Stainless Steel
joint design■ Caulked joint (1A, 3A), 1/2 inch joint minimum■ Channel filler (1) - 3/4 inch joint
dimensions■ Max height 1 section: 10’
OPTIONAL DESIGNS
R I G I D I Z E D ® M E T A L S
column covers
HAIRLINE AND REVEALJOINT COLUMN COVERS
3 PART CSI SPECIFICATIONS AVAILABLE ON WWW.RIGIDIZED.COM12
SQUARE COLUMN COVERS
MIN 14” SQUAREMAX 28” SQUARE
MIN 24” SQUAREMAX 56” SQUARE
MIN 30” SQUAREMAX 48” SQUARE
2 SECTIONS 4 SECTIONS 4 SIDE SECTIONS
ROUND/RACETRACK COLUMN COVERS
2 SECTIONS 3 SECTIONS 4 SECTIONS RACETRACK
MIN DIAMETER 14”MAX DIAMETER 36”
MIN DIAMETER 36”MAX DIAMETER 54”
MIN DIAMETER 48”MAX DIAMETER 72”
MIN 48” X 36”MAX 60” X 96”
HORIZONTAL BUTT JOINT
HORIZONTAL CAULK JOINT
VERTICAL JOINTS
V
FLOOR, SLAB, ROOF OR CEILING
RECESSED TRIM RING
V
COLUMN COVER
V
FLOOR, SLAB, ROOF OR CEILING
COLUMNCOVER
CAULK
CAULK STOP
BACKER RODV
V
VV
R I G I D I Z E D ® M E T A L S A R C H I T E C T U R A L A P P L I C A T I O N S
UPPERSECTION
3
FORMEDLOWER
SECTION
3A
CAULK JOINT
5
22A
1 REVEAL JOINT 1A CAULK REVEAL1
3
1A
5
3A
2, 2A
2, 2A
13
14
SQUARE COUNTERTOP BACKBOARDRADIUS COUNTERTOP BACKBOARD
RADIUS CORNER COUNTERTOP RADIUS EDGE
R I G I D I Z E D ® M E T A L S
we fabricate metals : custom-fabricated countertops
CUSTOM COUNTERTOPSRIGIDIZED® CUSTOM METAL COUNTERTOPS are made from textured and plain stainless steel and copper. We offer a wide variety of edge profiles, back splash styles and corner options. Suitable for both commercial and residential applications, RigidizedCustom Metal Countertops are available with integral sinks.
EDGE PROFILES
SQUARE CORNER COUNTERTOP SQUARE EDGE
SQUARE EDGE WITH RETURN SQUARE EDGE WITH 2 RETURNS
CUSTOM STAINLESS COUNTERTOP IN PATTERN 1.HM / VIBRATION FINISH
CUSTOM COUNTERTOP IN POLISHED AND TEXTURED STAINLESS
R I G I D I Z E D ® M E T A L S A R C H I T E C T U R A L P R O D U C T S
#4 SATIN TILE 1.HM COPPER TILE
COPPER SATIN TILE 2.RL TILE
METAL-FACED TILE
RIGI-TILE®
RIGI-TILE® METAL TILES As easy to install as ceramic tile, Rigi-Tile®
is a showcase for long-lasting beauty. Textured stainless steel tiles are ideal for countertops, backsplashes, flooring, and walls. Innovative newdesign promotes the adhesion of the grout to the tile substrate, allowingunlimited design and layout possibilities.
■ Glued to Hardie® backer board■ Cut with a wet saw■ Available in sizes:
2” x 2” Square4” x 4” Square6” x 6” Square
Rigi-tile floor in 2.RL Stainless
15
R I G I D I Z E D ® M E T A L S
we supply metals : for elevator surfaces, handrails and restroom partitions
Wal-Mart®, the world’s largest retail chain,
specifies bathroom partitions manufactured with
RIGIDIZED® 5.WL® to dramatically reduce
maintenance costs, discourage vandalism and
enhance aesthetic appearance.
Offered by all metal partition manufacturers.
PATTERNS 5.WL® AND 60.LTH® ARE 60 INCHES WIDE FOR ADA COMPLIANT RESTROOM PARTITIONS
HISTORIC BROADWAY MARKET, BUFFALO, NY.PHOTO COURTESY OF PETER C. MURAD, AIA, AICP ARCHITECTURAL RESOURCES, CITIES OF BUFFALO AND NEW YORK
16
useful informationTHEORETICAL METAL WEIGHTS per square foot
RIGI-GRIP® RIGIDIZED HANDRAILS
are perfect for railings, grab bars and
transportation holds, to limit and
prevent accidental injury.
■ Up to 6x more grippable than
ordinary handrail
■ 1.25 ̋and 1.50 ̋OD standard
■ .060 ̋and .048 ̋wall thickness
■ Rigidized supplies textured tubes
to fabricators of handrail systems.
GET A HANDLE ON SAFETY RIGI-GRIP®
STAINLESS STEELALLOY TYPES
304 is the basic chromium-nickel austenitic stainlesssteel and has been foundsuitable for a wide range of applications. It is the mostreadily available in a variety ofproduct forms. This grade iseasy to form and fabricatewith excellent resistance tocorrosion.
316 offers more corrosion-resistance through the addition of molybdenum. This grade is desirable wherethe possibility of severe corrosion exists, such asheavy industrial, marine andde-icing environments.
430 is a straight chromiumferritic stainless steel withlower corrosion resistancethan the 300 series. It is principally employed for interior use and is magnetic.
STAINLESS STEEL/CRCS
THICKNESS WT/SQ.FT.10 GAUGE .135˝ 5.68 LBS
11 GAUGE .120˝ 5.04 LBS
12 GAUGE .105˝ 4.41 LBS
13 GAUGE .090˝ 3.78 LBS
14 GAUGE .075˝ 3.10 LBS
16 GAUGE .060˝ 2.50 LBS
18 GAUGE .048˝ 2.00 LBS
20 GAUGE .036˝ 1.50 LBS
22 GAUGE .029˝ 1.20 LBS
24 GAUGE .024˝ 1.03 LBS
26 GAUGE .018˝ 0.76 LBS
28 GAUGE .015˝ .063 LBS
ALUMINUM
THICKNESS WT/SQ.FT..125˝ 1.78 LBS
.100˝ 1.42 LBS
.090˝ 1.28 LBS
.080˝ 1.14 LBS
.063˝ .884 LBS
.050˝ .713 LBS
.040˝ .57 LBS
.032˝ .456 LBS
.025˝ .356 LBS
.020˝ .285 LBS
.016˝ .228 LBS
.012˝ .171 LBS
COPPER / BRASS / MUNTZ / BRONZE
.090˝ 3.99 LBS
.080˝ 3.62 LBS
.062˝ 2.92 LBS
.050˝ 2.22 LBS
32 OZ. .043˝ 1.89 LBS
24 OZ. .032˝ 1.5 LBS
20 OZ. .027˝ 1.25 LBS
18 OZ. .024˝ 1.13 LBS
16 OZ. .021˝ 1 LBS
14 OZ. .019˝ 0.875 LBS
12 OZ. .016˝ 0.75 LBS
SHEET SIZE SQ. FT.
36 x 96 2436 x 120 3036 x 144 3648 x 96 3248 x 120 4048 x 144 4860 x 96 4060 x 120 5060 x 144 60
OFFERED IN PATTERN RGM
17
R I G I D I Z E D ® M E T A L S A R C H I T E C T U R A L A P P L I C A T I O N S
RIGIDIZED® METALS CORPORATION IS THE ORIGINATOR OF THE TEXTURED METAL PROCESS. RIGIDIZED® METALS ARE CREATED BY A UNIQUE PROCESS THAT ENHANCES THE BEAUTY AND DURABILITY OF FLAT METAL. THERE ARE DOZENS OF PATTERNS TO CHOOSE FROM, IN A WIDE SELECTION OF METALS AND FINISHES, FOR USE IN ANY IMAGINABLE APPLICATION.
CALL RIGIDIZED® METALS TODAY 1-800-836-2580 FOR INFORMATION, PRICING AND SAMPLES OF OUR PRODUCTS.
OR VISIT OUR WEBSITE: www.rigidized.com
Rigidized® Metals Corporation | 658 Ohio Street | Buffalo, New York 14203 | USA
TOLL FREE 800.836.2580 | PH 716.849.4760 | FAX 716.849.0401 | WEB SITE www.rigidized.com
Rigidized® and Rigid-Tex® are registered trademarks. © 2008 by Rigidized Metals Corporation.
MINIMUM-MAXIMUM MATERIAL THICKNESS
Cold Rolled Carbon, Galvanized,Maximum Sheet Width Pattern Stainless Steel Aluminum, Copper, Brass, Bronze, Muntz
AVAILABLE IN 5.WL® 0.010˝ - 0.090˝ 0.008˝ - 0.090˝ SHEETS UP TO 60˝ RTP® / RSS.3 0.018˝ - 0.125˝ 0.010˝ - 0.125˝
60.LTH® 0.010˝ - 0.075˝ 0.010˝ - 0.090˝
AVAILABLE IN 6.WL®** 0.010˝ - 0.105˝ 0.008˝ - 0.125˝SHEETS UP TO 52˝ 1.NA®, 4.LB®*** 0.018˝ - 0.075˝ 0.010˝ - 0.090˝48˝ STANDARD 6.HC®** 0.024˝ - 0.105˝ 0.024˝ - 0.105˝
2.WL® 0.015˝ - 0.024˝ 0.008˝ - 0.025˝1.RL® 0.018˝ - 0.125˝ 0.018˝ - 0.125˝2.FL® 0.024˝ - 0.125˝ 0.020˝ - 0.125˝3.ND® 0.018˝ - 0.036˝ 0.024˝ - 0.040˝6.SL® 0.018˝ - 0.060˝ 0.024˝ - 0.125˝7.DL 0.036˝/.060˝/.075˝ N/A3.QLT® 0.024˝ - 0.029˝ 0.024˝ - 0.029˝1.UN 0.018˝ - 0.125˝ 0.018˝ - 0.125˝1.SLG® 0.010˝ - 0.048˝ 0.010˝ - 0.060˝
AVAILABLE IN 1.HM® 0.010˝ - 0.036˝ 0.010˝ - 0.040˝SHEETS UP TO 38˝ 1.CS® 0.018˝ - 0.075˝ 0.010˝ - 0.080˝36˝ STANDARD
■ Standard Lengths: 96˝, 120˝, 144˝
■ *Maximum length 96”
■ ** 6.WL and 6.HC are also available at 0.125˝ thick stainless steel sheets up to 36˝ wide.
■ *** 4.LB is available in 48” max width
■ Please phone customer service for specific finish, pattern specifications, technical information and free samples.
U.S. Standard Gauges /Nominal Thickness in Inches
10 /.141˝/3.58mm
11 /.120˝/3.04mm
12 /.105˝/2.66mm
14 /.075˝/1.91mm
16 /.060˝/1.52mm
18 /.048˝/1.22mm
20 /.036˝/.91mm
22 /.029˝/.74mm
24 /.024˝/.61mm
26 /.018˝/.46mm
28 /.015˝/.38mm
32 /.010˝/.25mm
R I G I D I Z E D ® M E T A L S
patterns : technical data
SEE US ONARCAT.COM