rkp‑isc‑2220 intelligent system...

4
Systems | RKP‑ISC‑2220 Intelligent System Controller The RKP‑ISC‑2220 Intelligent System Controller with an integrated dual reader interface serves as the primary access control engine for ReadykeyPRO input/output interfaces. It supports connections to multiple combinations of ReadykeyPRO Input Control Modules, Output Control Modules, and Card Reader Interface Modules. The RKP‑ISC‑2220 provides power, performance, and flexibility for the most demanding applications. Note The RKP-ISC-2220 requires ReadykeyPRO 6.1.222 software or newer. System Overview The RKP‑ISC‑2220 Intelligent System Controller provides a single-board solution for interfacing one or two doors to a ReadykeyPRO system. In addition, other I/O and reader interface modules can be added on the RKP‑ISC‑2220’s downstream port to expand its capabilities. The RKP‑ISC‑2220 is scalable for any access control application, from the most basic to the most sophisticated. In the event of communication loss, the RKP‑ISC‑2220 allows nearly all local functionality to continue unimpaired until the server connection is restored. 1 2 4 3 5 6 7 1. ReadykeyPRO Security Server 2. Corporate Network (TCP/IP) 3. RKP‑ISC‑2220 Intelligent System Controller 4. RS‑485 Bus (multidrop) 5. RKP‑SRI Single Reader Interface Module 6. RKP‑INPUT‑16 Input Control Module 7. RKP‑OUTPUT‑16 Output Control Module RKP‑ISC‑2220 Intelligent System Controller On-board Ethernet 10/100Base-T port provides up to 8 times greater throughput than serial-to-Ethernet converters; DHCP and fixed IP addressing supported DNS device naming through DHCP extended commands 6 MB of available on-board, non-volatile flash memory Biometric template storage support for Schlage Recognition Systems, Bioscrypt, and Identix Up to 32,000 access level permissions 255 holidays with grouping; 255 time zones, each with 6 intervals Elevator control support for up to 128 floors Up to 9-digit user PIN codes 20 status LEDs Advanced Encryption Standard (AES) 128-bit algorithm for communications www.boschsecurity.com

Upload: vunhi

Post on 22-May-2018

222 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: RKP‑ISC‑2220 Intelligent System Controllerstna.resource.bosch.com/documents/Data_sheet_enUS_2677578891.pdf · RKP‑ISC‑2220 Intelligent System Controller | 3 Ordering Information

Systems | RKP‑ISC‑2220 Intelligent System Controller

The RKP‑ISC‑2220 Intelligent System Controller with anintegrated dual reader interface serves as the primaryaccess control engine for ReadykeyPRO input/outputinterfaces. It supports connections to multiplecombinations of ReadykeyPRO Input Control Modules,Output Control Modules, and Card Reader InterfaceModules. The RKP‑ISC‑2220 provides power, performance,and flexibility for the most demanding applications.

Note The RKP-ISC-2220 requires ReadykeyPRO6.1.222 software or newer.

System Overview

The RKP‑ISC‑2220 Intelligent System Controller provides asingle-board solution for interfacing one or two doors to aReadykeyPRO system. In addition, other I/O and readerinterface modules can be added on the RKP‑ISC‑2220’sdownstream port to expand its capabilities. TheRKP‑ISC‑2220 is scalable for any access control application,from the most basic to the most sophisticated. In the eventof communication loss, the RKP‑ISC‑2220 allows nearly alllocal functionality to continue unimpaired until the serverconnection is restored.

1

2

4

3

5 6 7

1. ReadykeyPRO Security Server2. Corporate Network (TCP/IP)3. RKP‑ISC‑2220 Intelligent System Controller4. RS‑485 Bus (multidrop)5. RKP‑SRI Single Reader Interface Module6. RKP‑INPUT‑16 Input Control Module7. RKP‑OUTPUT‑16 Output Control Module

RKP‑ISC‑2220 Intelligent SystemController

▶ On-board Ethernet 10/100Base-T port provides up to 8times greater throughput than serial-to-Ethernetconverters; DHCP and fixed IP addressing supported

▶ DNS device naming through DHCP extendedcommands

▶ 6 MB of available on-board, non-volatile flash memory

▶ Biometric template storage support for SchlageRecognition Systems, Bioscrypt, and Identix

▶ Up to 32,000 access level permissions

▶ 255 holidays with grouping; 255 time zones, each with6 intervals

▶ Elevator control support for up to 128 floors

▶ Up to 9-digit user PIN codes

▶ 20 status LEDs

▶ Advanced Encryption Standard (AES) 128-bit algorithmfor communications

www.boschsecurity.com

Page 2: RKP‑ISC‑2220 Intelligent System Controllerstna.resource.bosch.com/documents/Data_sheet_enUS_2677578891.pdf · RKP‑ISC‑2220 Intelligent System Controller | 3 Ordering Information

2 | RKP‑ISC‑2220 Intelligent System Controller

Functions

Integrated Dual Reader Interface• Supports Data1/Data0, Clock/Data, and Open

Supervised Device Protocol(OSDP) compatible RS‑485readers and keypads

• Four Form‑C relay outputs, 5 A at 30 VDC• Door contact supervision (open/closed) and Request-

to-Exit (REX) push-button monitor for each door• Eight Inputs individually programmable for normally

open/closed, supervised or unsupervised circuits.• Strike control and auxiliary output for each door• Bicolor reader status LED support plus beeper control,

or two-wire LED support

CommunicationsUtilizing its native Ethernet communications and anadvanced 32-bit processor, the RKP‑ISC‑2220 cancommunicate upstream to the host computer through itsEthernet port, or alternately at up to 115.2 Kbps usingRS‑232 communication directly or through an external dial-up modem. The RKP‑ISC‑2220 supports one downstreamRS‑485 two-wire port, which can be used to connect up to32 devices (maximum 64 doors).

Input/OutputTwo on-board reader ports support Data1/Data0, Clock/Data, Bioscrypt RS‑485 readers, and the bidirectionalRS‑485 OSDP communications. Each RKP‑ISC‑2220supports up to eight different card formats. TheRKP‑ISC‑2220 includes eight inputs that support normallyopen, normally closed, supervised, and unsupervisedcircuits. In addition, four output relays support fail-safe orfail-secure operation.

Certifications and Approvals

UL Standard UL294, Access Control Systems UnitsUL1076, Proprietary Alarm Units

Installation/Configuration Notes

Compatibility Information

Modules RKP-INPUT-16 Input Control ModuleRKP-OUTPUT-16 Output Control ModuleRKP-SRI Single Reader Interface ModuleRKP-DRI Dual Interface Module

Multiplexers RKP-MUX-8 Star Multiplexer

Technical Specifications

Board Design

Dimensions: 6 in. x 8 in. x 1 in.(15 cm x 20 cm x 2.5 cm)

Weight: 9 oz (0.26 kg)

Indicators: 20 status LEDs

RAM/Memory: 6 MB

Environmental Considerations

ROHS Compliant

Relative Humidity: 0% to 95%, non‑condensing

Temperature (Operating): +32°F to +158°F (0°C to +70°C)

Temperature (Storage): -67°F to +185°F (-55°C to +85°C)

Power Requirements

Backup Battery: 3 V Lithium, type BR2325, BR2330, orCR2330

Input (DC): 12 or 24 VDC ± 15%, 500 mA

Communications

Primary Port: 10/100Base‑T Ethernet

Upstream Port (alternate): RS‑232 9600 to 115.2 kbps async

Downstream Port: RS‑485 (two-wire) 9600 to 38.4 kbps async

Connections

Inputs: Twisted pair, 30 Ω maximum

Outputs: As required for load

Power: Twisted pair, 18 AWG (1.2 mm)

RS‑485: 24 AWG (0.6 mm) minimum twisted pair(s)with shield, 4000 ft (1219 m) maximum

RS‑232: 24 AWG (0.6 mm) minimum twisted pair(s)with shield, 25 ft (7.6 m) maximum

Alarm Inputs

Door Position, REX, and AUX: Eight, each programmable as normally openor normally closed, supervised or unsuper-vised circuits

Tamper and Power FailureMonitor:

One unsupervised, dedicated

Alarm Outputs

Relay Outputs: Four, Form C 5 A at 30 VDC relay outputs:two strike, 2 auxiliary

Capacity

Cardholders: Up to 250,000 (supports selective down-loads for larger cardholder databases)

Events: Up to 50,000

Readers: 64 readers (32 downstream devices)

Page 3: RKP‑ISC‑2220 Intelligent System Controllerstna.resource.bosch.com/documents/Data_sheet_enUS_2677578891.pdf · RKP‑ISC‑2220 Intelligent System Controller | 3 Ordering Information

RKP‑ISC‑2220 Intelligent System Controller | 3

Ordering Information

RKP‑ISC‑2220 Intelligent SystemControllerPrimary access control engine for Readykey-PRO input and output (I/O) interfaces.

RKP-ISC-2220

Accessories

RKP-336KMODEM External Modem(33.6K)Provides the data speed and transmission out-put required for the ReadykeyPRO Unlimitedsystem. 12 VDC powered 33.6K external mo-dem. Includes communications cable.

RKP-336KMODEM

www.boschsecurity.com

Page 4: RKP‑ISC‑2220 Intelligent System Controllerstna.resource.bosch.com/documents/Data_sheet_enUS_2677578891.pdf · RKP‑ISC‑2220 Intelligent System Controller | 3 Ordering Information

4 | RKP‑ISC‑2220 Intelligent System Controller

Americas:Bosch Security Systems, Inc.130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fax: +1 585 223 [email protected]

Europe, Middle East, Africa:Bosch Security Systems B.V.P.O. Box 800025600 JB Eindhoven, The NetherlandsPhone: + 31 40 2577 284Fax: +31 40 2577 [email protected]

Asia-Pacific:Robert Bosch (SEA) Pte Ltd, Security Systems11 Bishan Street 21Singapore 573943Phone: +65 6258 5511Fax: +65 6571 [email protected]

Represented by

© Bosch Security Systems Inc. 2010 | Data subject to change without noticeT6443049483 | Cur: en-US, V2, 4 Jul 2010