rittal – hygienic design · kl ip 69k), used e.g. as socket outlets, are mounted on the wall at...
TRANSCRIPT
R
Extra cleanliness guaranteed
Rittal – Hygienic Design
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
2 Rittal Hygienic Design
The Rittal Hygienic Design for food safety is based on:● Machinery Directive
(Directive 98/37/EC) Food Machinery section, Appendix 1, point 2.1 (to be replaced by 2006/42/EC)
● DIN EN 1672-2:2005 Food machinery – General design princi-ples – Part 2: Hygiene requirements
● DIN EN ISO 14 159 Machine safety – Hygiene requirements pertaining to the design of machinery
● Document 13 EHEDG-Guideline to the hygienic design of apparatus for open processes, prepared in collaboration with 3-A and NSF International
Become cleaner better and more productive – with Rittal Hygienic Design.
Benefits compared with conventional enclosures:● Higher productivity through greater system availability. ● Reducing the amount of cleaning required (faster
cleaning, reduced energy requirements, reduced use of chemicals).
● Superior product quality and greater durability by reducing the contamination risk, which in turn helps to avoid production losses.
● Improved protection for both consumers and employees.
HDRittalHygienic Design
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
3Rittal Hygienic Design
Cleaning and disinfectionHygiene checks and the monitoring of cleaning processes have revealed that the use of high pressure washing harbours the risk of organic contaminants (fats or proteins) entering niches and being more widely distributed.
For this reason, pressures are being significantly reduced.
Decide for yourself what is important:● High pressure-resistant
design A labyrinth in front of the seal or multiple screw-fastening of
the lid or door to the enclo-sure, to enable the use of high pressure hosing of up to 120 bar, whether static or manual. As well as hampering servic-ing, multiple screw-fastening also harbours additional
hygiene risks resulting from incorrectly tightened screws or damaged seals.
● Hygienic design The new Hygienic Design avoids the hollows and dead spaces found in labyrinths for high pressure applications.
RITTAL OFFERS THE “KEY” TO OPTIMUM HYGIENE FOR ALL SECTORS!
The completely new lock insert is synonymous with the consistency
of Hygienic Design from Rittal. Featuring a high protection category,
it has nowhere for micro-organisms to hide, making cleaning easy.
The same is true of the entire new product line, in every respect.
Rittal Hygienic Design reduces the risk of contamination and
significantly increases your productivity.
Meat, poultry, fish, delicatessen products, ready meals
Beverages, fruit and vegetables
Milk processing, cheese and dairy product manufacturing
Baked goods and confectionery
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
4 Rittal Hygienic Design
Make existing plant more hygienic. This saves time with cleaning and disinfection, i.e. down-time is reduced, or plant productivity is increased, provided ...
Optimise existing machines and systemsThe growing incidence of food poisoning and food product recalls caused by microbial, physical or chemical contami-nation underscore the need for reliable hygiene standards.
... the wall-mounted devices and enclosures are installed at a distance for cleaning purposes. With the HD wall spacer bracket.
… enclosures with cable entry from below are mounted on the new HD supporting structure rather than on a base/plinth or a mounting angle frame.
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
5Rittal Hygienic Design
... the new HD levelling feet eliminate the need for adjustment with external threads.
... the polyamide or brass cable entry with external thread is replaced by the new HD stainless steel cable gland.
... the standard flat roofs in TS 8 enclosures are replaced by a sloped attachment.
... terminal boxes (Premium-KL IP 69K), used e.g. as socket outlets, are mounted on the wall at 45° instead of horizontally.
BECOME CLEANER, BETTER AND MORE PRODUCTIVE – WITH RITTAL HYGIENIC DESIGN
When it comes to the increasing demands of food safety, stainless
steel enclosures and enclosures in hygienic design are “two different
animals”.
Hygienic Design from Rittal offers mechanical engineers and plant
operators in the food sector and in clean rooms decisive new building
blocks for the hygiene demands of the future. This innovative sub-
range is based on our world-renowned expertise in enclosure
manufacturing and enclosure climate control.
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Hygienic DesignFeatures
6 Rittal Hygienic Design
Rittal Hygienic Design (HD) enclosures are key
elements in the design of open processes in the
food industry and clean rooms with an emphasis
on ease of cleaning.
Also the hygiene conditions of stainless steel cases
and enclosures are decisively optimised with Hygienic
Design system accessories.
Added cleanliness guaranteed!
1
2
3
6
4
5
7
4
1 2 3 4
The roof, which is tilted forwards by 30°, prevents objects from being deposited on it, is easily inspected, and allows fluids to drain off rapidly.
The large roof projection with the overhang edge significantly eases pressure on the seal. It is easily cleaned, thanks to a sufficiently large gap between the overhang edge and the door.
All-round chamfered door edge folds contribute significantly towards ease of cleaning.
The durable all-round, external silicone seal effectively prevents all gaps. It is easily replaced, and is clearly distinguishable from food with its blue colour.
5 6 7
Hinges that are inside the sealing zone create an exceptionally easy-clean design on the outside.
The fastener and lock insert are made from stainless steel on the outside. The material, and in particular the shape, allow easy and reliable cleaning.
The enclosure surface is fully sealed. This means that after machining, only essential openings remain.
If HD enclosures are used instead of stainless steel AE enclosures, there is no additional project planning work involved: The mounting plates have identical dimensions.
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Compact enclosures HD, single-door
Hygienic Design
7Rittal Hygienic Design
Material:Enclosure and door: Stainless steel Mounting plate: Sheet steel Lock inserts HD: Stainless steel 1.4404 (AISI 316L)Seal: Conforms to FDA Guide-line 21 CFR 177.2600
Surface finish:Enclosure and door: Brushed, grain 400, RA< 0.8 μmMounting plate: Zinc-plated
Protection category:IP 66 to EN 60 529
Supply includes:Enclosure of all-round solid con-struction, door with press-fitted seal, interchangeable door hinge
Detailed drawing,see page 19.
F
G
T
H2
B
H1
Width (B) mm Packs of 220 390 390 510 610 610 810 810 Page
Height front (H1) mm 350 430 650 550 430 650 1050 1250
rear (H2) mm 437 549 769 669 601 769 1221 1421
Depth (T) mm 155 210 210 210 300 210 300 300
Mounting plate width (F) mm 162 334 334 449 549 549 739 740
Mounting plate height (G) mm 275 355 570 470 355 570 955 1155
Model No. HD 1.4301 (AISI 304) 1 1302.600 1306.600 1308.600 1307.600 1320.600 1310.600 1316.600 1317.600Model No. HD 1.4404 (AISI 316L) 1 1302.5001) 1306.5001) 1308.5001) 1307.5001) 1320.5001) 1310.5001) 1316.6001) 1317.5001)
Accessories
Wall spacer bracket
50 mm 1 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 9
150 mm1) 1 4000.110 4000.110 4000.110 4000.110 4000.110 4000.110 4000.110 4000.110 9
300 mm1) 1 4000.120 4000.120 4000.120 4000.120 4000.120 4000.120 4000.120 4000.120 9
Supporting structure HD with 4 feet, from an enclosure depth of 300 mm depending on design code number, see page 8.
Rails for interior installation, see page 11.1) Delivery times available on request.
Cable gland HD, without external thread, Model No. see page 12.
Levelling feet HD,without external thread, Model No. see page 9.
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Hygienic DesignMake TS 8 baying systems more hygienic
8 Rittal Hygienic Design
Sloped attachment HD For TS 8 For retro-fitting individual or bayed TS 8 enclosures of spray-finished sheet steel or stainless steel.
Properties: ● Height, front: 35 mm. ● Roof projection, front: 8 mm. ● Maximum possible opening at the baying point
to the adjacent roof.
Protection category:IP 55 to EN 60 529, complies with NEMA 12.
Supply includes:Assembly parts and all required seals.
Version Packs of Model No. HDStainless steel 1.4301
(AISI 304), brushed, grain size 400
1 4000.039
Stainless steel 1.4404 (AISI 316L),
brushed, grain size 4001 4000.049
Sheet steel, spray-finished, RAL 7035 1 4000.059
Delivery times available on request.
Design code number – – –
Roof tilt 1 – 30°
(EHEDG standard)2 – 45°
Enclosure width mm1) Enclosure depth mm
Assembly (viewed from the front)1 – for free-standing enlosure2 – for bayed end enclosure, left2) 3 – for bayed end enclosure, right2) 4 – for bayed enclosure, centre2)
1) Max. 1200 mm2) Each with a T-section seal and connection accessories.
Example: Sloped attachment HD, 30° roof tilt, for TS 8 free-standing enclosure with width x depth 800 x 600 mm.
– – –1 800 600 1
Design code number – – – –
For enclosure 1 – Compact enclosure
HD 2 – TS 8 (stainless steel/
sheet steel)
Enclosure width mm
Enclosure depth mm
Levelling (0 – 55 mm) 1 – with
(for all 4 feet) 2 – without
Base mount 1 – with 2 – without
Supporting structure HD with levellingwith 4 feet for TS 8Benefits in detail: Solid cross-sections and continuously welded seams ensure complete water-tightness. The round profile helps to avoid the common problem of collecting dirt, particularly with horizontal surfaces.
The guaranteed floor clearance of the enclosures facilitates easy wet or dry cleaning.
The width supports the installation of individual supporting structures underneath bayed TS 8 enclosure systems.
Design: ● including levelling 0 – 55 mm ● without base mount ● with horizontal grille for cable routing between
the support strips, rear
Material:Stainless steel tube 1.4301 (AISI 304)
Supply includes:Assembly parts and seals.
Accessories:Wall spacer bracket for secure mounting, see page 9.
For TS 8 W x D mm Height mm Model No. HD
800 x 500 300 4000.310800 x 600 300 4000.3111200 x 500 300 4000.3121200 x 600 300 4000.313
To order in stainless steel 1.4404 (AISI 316L), please add extension .4XX to the Model No.
Supporting structure HD according to specificationswith 4 feet, height 300 mm
Material Model No. HD1.4301 (AISI 304) 4000.3091)
1.4404 (AISI 316L) 4000.4091) 1) Please additionally give the design code. Other heights available on request. Delivery times available on request.
Example: Supporting structure for TS 8, width 1000 mm, depth 800 mm, without levelling, with base mount.
2 – 1000 – 800 – 2 – 1
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Accessories
Hygienic Design
9Rittal Hygienic Design
Levelling feet HDMaterial:Stainless steel 1.4301 (AISI 304)
Supply includes:Assembly parts and seals.
Benefits in detail:The threaded spindle for levelling is completely concealed by a cover, and permanently sealed, thereby eliminating the time-consuming work of cleaning and disinfecting the thread. Floor angles of up to 10° can be compensated.
For enclosures
Levelling range mm
Base mount
Packs of
Model No. HD
TS 8 (M12) 120 – 175
without 4 4000.200with 4 4000.210
Compact enclosures HD (M12)
120 – 175without 2 4000.220
with 2 4000.230
To order in stainless steel 1.4404 (AISI 316L) please add the extension .XX1 to the Model No.
Wall spacer bracket HDMaterial:Stainless steel tube 1.4301 (AISI 304)
Supply includes:Assembly parts and seals.
Benefits in detail:Finding a way to permanently and securely seal the enclosure against the wall remains a problem. With this in mind, we recommend that you leave sufficient space to clean behind the enclosure.
Depending on the weight and dimensions, one, two, three, four or more supports may be fitted for attachment purposes. They may be mounted on the sides, rear or underside.
Wall spacer brackets may also be used in customised designs or with an adaptor plate for mounting other components such as switches and sockets, as well as wire-mesh cable trays.
Wall distance mm Packs of Model No. HD
50 1 4000.100150 1 4000.1101)
300 1 4000.1201)
1) Delivery times available on request. To order in stainless steel 1.4404 (AISI 316L) please add the extension .XX1 to the Model No.
6450
Ø 34
M8 x ...
15
M10 x ...
HD 4000.100 (mounting alternatives)Attachment from inside
Attachment fromoutside
Model No. HD H mm
1302.600/.500 330
Model No. HD H mm
1306.600/.500410
1320.600/.500
1307.600/.500 525
1308.600/.500625
1310.600/.500
Model No. HD H mm
1316.600/.500 1010
1317.600/.500 1210
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Hygienic DesignAccessories
10 Rittal Hygienic Design
Cam lock HD Hygienic Design variant for easy, safe cleaning.
Applications: ● Compact enclosures AE stainless steel
(except AE 1017.XXX and AE 1019.XXX). ● May be integrated into customised applica-
tions, e.g. covers of machine panels.
Material:Stainless steel 1.4404 (AISI 316L)
Accessories:Enclosure key HD, see page 10.
Ø 28
1727 5.5 20
15
2.5
6.5
SW
27
19
35
18.5
Ø 2
2.3
Packs of Model No. HD1 2304.010
Lock insert HD Version FHygienic Design version.
Applications: ● Baying system TS 8 ● PC enclosure systems, based on TS 8 ● Industrial Workstations, based on TS 8 ● Comfort handles for lock inserts
Material:Stainless steel 1.4404 (AISI 316L)
Accessories:Enclosure key HD, see page 10.
Packs of Model No. HD1 8611.400
Enclosure key HD Packs of Model No. HD1 2549.600
Bit HD for universal key SZ 2549.500See Cat. 32, page 959.
Packs of Model No. HD1 2549.510
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Accessories
Hygienic Design
11Rittal Hygienic Design
B1
Rails for interior installationfor compact enclosures HDFor mounting on the existing threaded bolts. With TS system punchings on three sides.
Material:Sheet steel, zinc-plated, passivated
Supply includes:Assembly parts.
Length mm Packs of Model No.
CM/HD 260 2 4000.500510 4 5001.050710 4 5001.051910 4 5001.0521110 4 5001.053
Interior installation, door
Enclosure Model No.
HD 1307.600/.500 HD 4000.500 – – –
HD 1308.600/.500 HD 1310.600/.500 – HD 4000.500 – –
HD 1316.600/.500 CM 5001.052 – CM 5001.050 CM 5001.050
HD 1317.600/.500 CM 5001.053 HD 4000.500 CM 5001.051CM 5001.050
CM 5001.051CM 5001.050
1 1 1 1
Rails for further door installation
Interior installation, enlosure
TS punched section with
mounting flange17 x 73 mm
TS mounting bars
Enclosure Model No. TS
HD 1308.600/.500 8612.140 4694.000
HD 1307.600/.500 8612.150 4695.000
HD 1310.600/.500 8612.160 4696.000
HD 1316.600/.500 HD 1317.600/.500 8612.065 –
HD 1308.600/.500HD 1310.600/.500 HD 1316.600/.500 HD 1317.600/.500
Enclosure
CM 5001.050 CM 5001.052 CM 5001.053
HD 1316.600/.500 HD 1317.600/.500
Enclosure
TS punched section with
mounting flange17 x 73 mm
TS 8612.130 (only on lock side)
Mounting platesTS 8612.400TS 8612.410
2 3
1
4
5
3
14
2
5
1
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Hygienic DesignAccessories
12 Rittal Hygienic Design
Stainless steel cable gland, Hygienic DesignSuitable for use in the following areas● Manufacturing and packaging of foodstuffs etc.● Clean room technology (e.g. pharmaceuticals)● Biotechnology● Chemical industry
Benefits: ● Smooth, solid exterior surfaces effectively pre-
vent the depositing of harmful micro-organ-isms. All threads are beneath the cap nut.
● Much easier, therefore cheaper, cleaning com-pared with conventional stainless steel cable glands.
● Reliable strain relief, thanks to duplicate cable attachment.
● Resistant to high-pressure cleaning (protection category IP 69K).
Material:Cap nut: Stainless steel 1.4305 (AISI 303) Seals: Conforms to FDA Guideline 21 CFR 177.2600
Protection category:IP 68 (5 bar, 30 min.) to EN 60 529 IP 69K to DIN 40 050-9
Standard version
EMC version
1 2 3
5
6
7
4
Critical pointswith conventional solutions
Cable entry in front of seal
No minimum radii on the hexagon
External thread
Gap caused by O-ring on the enclosure surface
1
2
3
4
Hygiene-compatible design features
Seal directly at the cable entry
Compliance with minimum radii on the hexagon
No external thread
Flush termination between the cap nut and the enclosure
1
2
3
4
3
4
2
1
3
4
2
1
Why hygiene-compatible cable glands?
SizeCable
diameter mm
Packs of Model No. HD
M12 x 1.5 3 – 6.5 5 2410.000M16 x 1.5 5 – 10 5 2410.010M20 x 1.5 6 – 12 5 2410.020M25 x 1.5 12 – 17 5 2410.030
SizeCable
diameter mm
Packs of Model No. HD
M16 x 1.5 5 – 10 5 2410.110M20 x 1.5 6 – 12 5 2410.120M25 x 1.5 12 – 17 5 2410.130
Seal
Cap nut
Gripper jaws
Shield spring (EMC version only)
Clamping ring
Enclosure seal
Base with locator for assembly tool
1
2
3
4
5
6
7
Stainless steel lock nutTo fit the stainless steel Hygienic Design cable glands.
Material:Stainless steel 1.4305 (AISI 303)
Factor Packs of Model No. HD M12 x 1.5 10 2410.200M16 x 1.5 10 2410.210M20 x 1.5 10 2410.220M25 x 1.5 10 2410.230
Assembly toolfor cable gland, stainless steel Hygienic DesignFor attaching a stainless steel Hygienic Design cable gland to an internal thread or via locking nuts. This can be achieved either from the inside or from the outside using an Allen key.
Supply includes:1 set = Adaptor for sizes from M12 – M25.
Packs of Model No. HD 1 set 2410.290
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Product outlook
Hygienic Design
13Rittal Hygienic Design
Support arm system CP-L, stainless steel In conjunction with the HD compact enclosure and cable entry from below, this offers the ideal solution for the human/machine interface.
The larger diameter provides space to insert several cables and/or larger connectors, and supports greater weights and offers increased stability when assembling the operating unit.
The support section, bent from a single piece, offers ideal hygienic conditions. Furthermore, there are no attachment components or sharp-edged steps on support arm components such as wall/floor mounting, enclosure coupling or enclosure attachment. All seals are external to ensure optimum hygiene requirements. For wall mounting from the outside, we recommend an additional seal and hex screws.
Due to the possibility of condensation forming in the support arm system as a result of temperature fluctuations, when cleaning and disinfecting the plant we recommend that the support arm should be attached to the bottom of the enclosure wherever possible.
Support section Size: External diameter: 70 mmWall thickness: 2.9 mm
Material:Stainless steel 1.4301
Surface finish:Brushed, grain 400, polished
Support arm components Material:Stainless steel 1.4305
Supply includes:Assembly parts and seal to the enclosure
Viewing window HDTo protect sensitive installed equipment – such as panel PCs – from damage during cleaning. In this way, plant downtime and expensive repairs are effectively avoided.
Properties:● Viewing window frame with a 10° all-round
chamfer so that fluids can drain off reliably● Hinge optionally at the top, right or left ● Silicone seal on the outside, no gap● Replaceable seal● Seal dyed blue to clearly distinguish it from
foodstuffs● Replaceable viewing panel
Material:Stainless steel 1.4301
Surface finish:Surface roughness RA< 0.8 μm
Interface extension HDFor extending the internal enclosure interfaces – e.g. from industrial PCs – up to the outside of the enclosure.
Benefits:● Rapid access for maintenance work● The protection category of the enclosure is
preserved.● Captive protective cap
Material:Stainless steel 1.4305
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Premium LineResistant to high-pressure cleaning
14 Rittal Hygienic Design
The perfect solution for ● Pressure washer resistance
(protection category IP 69K). The seal lies between two seals and is optimally com-pressed by the screw fastening.
● Suitability for clean rooms Optional screw fastening to comply with high standards in the food and hygiene sectors:
external with hex screws, internal with plastic bungs.
● Optimum EMC conditions The labyrinthe seal achieves a particularly high level of RF shielding of the enclosure.
Accessories: Rear panel support, interior CP 6682.000.Holds the rear panel against the enclosure at a 90° angle when it is flipped down; easily removed if required.
Material:Stainless steel 1.4301 (AISI 304)
Surface finish:Brushed, grain 240
Protection category:IP 69K to DIN 40 050-9
Cover or rear panel screw-fastened: optional, included with the supply.
1
Screw head on the outside ...
2
... or plastic bungs on the outside with concealed screws
12
Premium Line KL, IP 69 K
For detailed information, see Catalogue 32, page 306 and 1221.
Dimensions mm Model No. KL
Width Height Depth
150 150 80 1024.010
150 150 120 1024.020
300 200 120 1024.030
400 300 120 1024.040
To order in stainless steel 1.4404 (AISI 316L), please add extension .5X0 to the Model No.Delivery times available on request. Other sizes available on request.
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Resistant to high-pressure cleaning
Premium Line
15Rittal Hygienic Design
Premium Panel, IP 69 K
For detailed information, see Catalogue 32, page 311 and 1222.
Dimensions mm
Support arm
connection
Model No. CPWidth Height Depth For installation panel
W x H Installation depth
Operating housing
Keyboard housing
Operating housing
Operating housing
Keyboard housing
Operating housing
Keyboard housing
With keyboard housing
530 460 200 120
482.6 mm (19˝) x
354.8 mm (8 U)
482.6 mm (19˝) x
177 mm (4 U)
115 front 58 rear 63 Top 6680.000
530 460 200 120 115 front 58 rear 63 Bottom 6680.010
530 460 200 220 215 front 58 rear 63 Top 6680.100
530 460 200 220 215 front 58 rear 63 Bottom 6680.110
Without keyboard housing
530 360 – 120 482.6 mm (19˝) x
310 mm (7 U)
–
115 – Top, or bottom by rotating the enclosure
6681.000
530 360 – 220 215 – 6681.100
To order in stainless steel 1.4404 (AISI 316L), please add extension XX5X.XXX to the Model No.Delivery times available on request. Other sizes available on request
Premium TFT 17˝, IP 69 KTechnical specifications:Resolution max.: 17˝: 1280 x 1024 pixels, VGA + SXGA non-interlacedColours: 16.2 millionBrightness: 300 cd/m2 Reading angle: 150° horizontal, 130° vertical Contrast ratio: 500 : 1 MTBF backlight: 50,000 h Voltage: 12 V DC On Screen Display (OSD) at rear VGA input: 15 pin D-Sub Operating temperature: 0°C to +50°C
Power pack SM 6450.050 and connection cable SM 6450.060, see Cat. 32, page 1134.
Support arm connection
W mm
H mm
T1 mm
T2mm
Model No. SM
Bottom 530 360 120 70 6450.100Top 530 360 120 70 6450.110
To order version in stainless steel 1.4404 (AISI 316L) please use Model No. SM 6450.5XX. Delivery times available on request.
Pressure relief stopperEspecially when enclosures are exposed to changing climatic conditions (e.g. with outdoor siting), condensation may form in sealed enclosures due to pressure differences. The integral sealing membrane largely prevents such pressure differences and hence condensation; additionally, it also prevents the ingress of moisture from the outside. Installed in vertical surfaces to protect against dirt.
Technical specifications:● Air permeability up to 120 litres/hour with a
pressure difference of 70 mbar● Protection category IP 66, 68, 69K● Connection thread M12 x 1.5● For fitting in wall thicknesses up to 4 mm
Material:Polyamide
Colour:Similar to RAL 9005 (black)
Supply includes:Lock nut
Packs of Model No. SZ5 2459.500
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Compact enclosures AE
16 Rittal Hygienic Design
Stainless steel keyboard 19˝/4 Ubased on the piezo system. With this innovative technology, merely tapping lightly with your finger is sufficent to initiate switch-ing. There are no edges, cracks or hollows, as with conventional keyboards. It is therefore parti-cularly well-suited for the food industry (compact enclosures Hygienic Design, see page 7).
Technical specifications:Dimensions of front panel: 482.6 x 177 x 3.7 mm Installation depth 25 mm 105 keys Actuator travel/force: 0 mm/0.7 N Service life: 10 million switching cycles Keypad: Abrasion-resistant electrolyte lettering Operating temperature: –25°C to +55°C PS/2 and USB connection German layout
Material:Stainless steel 1.4301
Protection category:IP 69K to DIN 40 050-9
Supply includes:Connection cable, length 1.8 m, with PS/2 connector and hex nuts.
Rittal service:Country-specific layout available on request.
464.6
482.6 (19˝)
5
159
479.6
170
182.3
174
1.5
104
7
1
32 4
177
(4 U
)
>
Model No. SMStainless steel keyboard 6446.010
Front panel cut-out
Seal
Holes for fastening bolts
Contact surface
1
2
3
4
Optical mouse IP 68Input device for all areas where heavy contamination is unavoidable or where exceptional standards of hygiene are crucial.
Benefits: ● High-quality silicone surface. ● Integral optical scanning.● Sealed on all sides. ● Mechanical operating parts completely
impervious to dirt.● Easy to clean.● Also suitable for use in hygiene-sensitive areas.
Technical specifications:● Optical scanning (with 800 dpi resolution)● Silicone enclosure with high-quality surface
coating● Disinfectable ● Application area: from –40°C to +90°C
Protection category:IP 68 to EN 60 529
Material:Silicone top
Colour:Similar to RAL 9002
Supply includes:USB connection cable,cable length 1800 mm.
Note: Not suitable for use in the meat processing industry.
Accessories:Connector gland (SZ 2400.500), see Cat. 32 page 1057.Support for mousepad (SM 2381.000), see Cat. 32, page 1145.
Connection Packs of Model No. SMUSB 1 6445.100PS2 – on request
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
A partner for your plant
Liquid cooling concepts
17Rittal Hygienic Design
When a cooling water system is installed in the production
plant or hall, the cheapest and most hygienic method of
enclosure climate control is to use air/water heat
exchangers.
Assuming there is no cooling water system available, the
required cooling output for the individual heat exchangers,
either decentralised or centralised, can be provided via
recooling systems, which may be installed outside of the
open process.
In certain cases, e.g. for frequency converters, water cooling
may also be provided inside the enclosure. To this end, drive
modules from a wide range of manufacturers with a cold
plate at the rear may be mounted directly on the DCP water-
cooled mounting plate.
If the potential heat loss of the cold plate is not used com-pletely for converters, the enclosure internal temperature may be reduced with the add-on or stand-alone DCP cooling unit.Operating housings may be water-cooled using DCP panel cooling.The complete solution of enclosure or operating housing plus cooling concept is supplied by Rittal and ensures a clean, functional solution for the food industry and related sectors.
Air/water heat exchangersDesign:Fully wired ready for connection, plastic mounting trough, sheet steel cover spray-finished in RAL 7035, also available in stainless steel 1.4301 (AISI 304) on request.
Protection category:IP 55, on request IP 65
For detailed information, see Cat. 32, from page 675.
Recooling systemsFully wired and plumbed ready for connection,sheet steel enclosure, spray finished in RAL 7035, also available in stainless steel 1.4301 (AISI 304) on request.
For detailed information, see Cat. 32, from page 654.
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Liquid cooling conceptsA partner for your plant
18 Rittal Hygienic Design
DCP mounting platePower electronic components can be cooled particularly
effectively using the liquid cooled plate. Heat losses are
cleverly dissipated from the enclosure or housing without
compromising the high enclosure protection category in any
way. Furthermore, liquid cooling is both quiet and a thousand
times more efficient than heat dissipation via air.
The Rittal DCP Cold Plate has received type-tested certification from the TÜV inspection authority and is approved for pressures up to 10 bar.
ype Teste
3 basic variants are available for the configuration of various power electronic components:
Siemens SINAMICS S 120 series Danfoss frequency converter VLT� Automation Drive FC300
1. With drilling surface for the customer to drill their own tapped holes (core hole max. 12 mm)
2. With variable wire clamp system as an accessory for clamping surface: ● All-round ● Side● Top and bottom
3. Manufacturer-specific Other sizes and manufacturers available on request.
For detailed information, see Cat. 32, from page 731.
Rittal DCP CoolingUnitThe CoolingUnit is available in two variants. As a stand-alone unit with press-fitted cooler tubes, or as an add-on in conjunction with a Rittal Cold Plate. The optional housing for the cooler ensures even more efficient air routing and thus reliable cooling of the air inside the enclosure.
Detailed information and accessories, see Cat. 32, from page 735 and also at www.rittal.com/dcp
DCP CoolingUnit – Add-on
DCP CoolingUnit – Stand-alone
Rittal DCP PanelCoolingThis integrated PanelCooling solution was developed by Rittal for optimum, space-saving cooling of operating housings. Heat losses of approx. 150 – 350 W can be dissipated without the need for external add-ons. The high protection category of the enclosure is retained, thanks to the fluid connection at the rear of the panel.
Detailed information and accessories, see Cat. 32, from page 733 and also at www.rittal.com/dcp
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
Technical details
Hygienic Design
19Rittal Hygienic Design
B1
i.L. B2
78H
4
200
B3
70 80
3535
158
(10)(10)
(10)
B4
2
3
1
3
2
3
3
4
H2
H1
T2
T1
T3
i.L. H
3
50
400
H6
Z
5
5
B1
i.L. B2
368
575
H4
200
H5
90
3535
(10) (10)
60
(10)
B4
7
4
6
7
7
6
7
T2
T1
i.L. H
3
H1
H2
T3
50
H5
175
H6
Z
H6
Z
9090
740
12.5
1155
18
700
01
02
03
04
07
08
09
10
11
01
02
03
04
07
08
09
10
11
05
06
05
06
1125
Ø 10
90 90
700
739
930
955
12
01
02
03
04
05
06
07
08
09
01
02
03
04
05
06
07
08
09
Ø 10
F2
F1
90 90
G2
G1
01
02
01
02
03 03
Ø 10
122
138
162
9
122
225
260
275
02
0101
02
Ø 9
Ø 6.5
Compact enclosures HD, single-doorPage 7
Model No. HD Width dimensions mm Height dimensions mm Depth dimensions mm Mounting plates mm Material thickness mm
Stainless steel B1 B2 B3 B4 H1 H2 H3 H4 H5 H6 T1 T2 T3 F1 F2 G1 G2 Enclosure Door Mounting
plate
1302.X00 220 170 – 200 350 437 260 – – 293 155 162 113 – 130 – – – – 1.25 1.5 2.0
1306.X00 390 340 – 370 430 549 340 240 – 373 210 217 168 – 185 334 295 355 330 1.5 1.5 2.0
1307.X00 510 460 375 490 550 669 460 360 – 493 210 217 168 – 185 449 410 470 445 1.5 1.5 2.5
1308.X00 390 340 275 370 650 769 560 460 – 593 210 217 168 – 185 334 295 570 545 1.5 1.5 2.5
1310.X00 610 560 475 590 650 769 560 460 – 593 210 217 168 – 185 549 510 570 545 1.5 2.0 2.5
1316.X00 810 760 – 790 1050 1221 960 280 800 993 300 307 258 – 275 – – – – 1.5 2.0 3.0
1317.X00 810 760 – 790 1250 1421 1160 480 1000 1193 300 307 258 – 275 – – – – 1.5 2.0 3.0
1320.X00 610 560 – 590 430 601 340 240 – 373 300 307 258 – 275 549 510 355 330 1.5 1.5 2.5
H1 =H2 =H3 =H4 =H5 =
H6 =
Enclosure height, frontEnclosure height, rearClearance height of enclosureSpacing between fasteners Separation height of threaded bolts on the door Height of door
T1 =T2 =T3 =
Depth between rear panel and doorOverall depthPossible mounting depth (mounting plate assembly)
For HD 1302.X00
For HD 1306.X00, HD 1307.X00, HD 1308.X00, HD 1310.X00, HD 1320.X00
For HD 1307.X00, HD 1308.X00, HD 1310.X00
1
2
3
Max. installation area, door
For HD 1308.X00, HD 1310.X00
4
5
For HD 1316.X00
For HD 1317.X00
6
7
HD 1317.X00 HD 1316.X00 HD 1306.X00, HD 1307.X00, HD 1308.X00, HD 1310.X00, HD 1320.X00
HD 1302.X00
Mounting plate
F1 =F2 =
G1 =G2 =
Mounting plate width Separation width of attachment bolts
Mounting plate height Separation height of attachment bolts
Enclosure
B1 =B2 =B3 =
B4 =
Overall width Clearance width of enclosure Separation width of threaded bolts on the doorWidth of door
HD 1302.X00, HD 1306.X00, HD 1307.X00, HD 1308.X00, HD 1310.X00, HD 1320.X00
HD 1316.X00, HD 1317.X00
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om
R
Switch to perfection
Small enclosures � Compact enclosures � Large enclosures Products for the human/machine interface � Console systems Material: sheet steel, stainless steel, aluminium and plastic Industrial network technology � Input and signalling devices Solutions for EMC and Ex � Cable glands
All in all – solutions from Rittal
Rittal has one of the largest ranges of enclosures available for immediate delivery. However, Rittal also supplies inte-grated solutions – up to Level 4. This comprises mechanical installation, power supply, electronic components, climate control and central monitoring. For all of your requirements.
Fully assembled and functional. Wherever in the world you develop and implement solutions for yourself and your customers, we are close at hand. The global alliance between production, distribution and service guarantees closeness to the customer. Worldwide!
01/0
9 � E
973
Electronic Packaging
IT Solutions
Communication Systems
System Climate Control
Power Distribution
Industrial Enclosures
Rittal GmbH & Co. KG � Postfach 1662 � D-35726 HerbornTelephone: +49(0)2772 505-0 � Telefax: +49(0)2772 505-2319 � eMail: [email protected] � www.rittal.com
Court
esy
of CM
A/F
lodyn
e/H
ydra
dyn
e ▪
Motion C
ontr
ol ▪
Hyd
raulic
▪ P
neu
mat
ic ▪
Ele
ctrica
l ▪
Mec
han
ical
▪ (
800)
426-5
480 ▪
ww
w.c
maf
h.c
om