ritorno round symmetrical led [rrsl] selux
TRANSCRIPT
Page 1 of 7 (Rev. 09/2020)
RRSL_ss_v3.1In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
ApprovalsProduct Modifications Please list modification requirements for review by factory:
LED WARRANTY
5YEAR IP65
Ritorno Round Symmetrical LED
- - - - - --
BUY AMERICAN
Project:
Type: Qty:
Date: Customer:
Date:
Series RRSL Ritorno Round Symmetrical LED
Mounting 1 Single
W Wall Mount
RRSL
Order Code: RRSL
Finish WH White
BK Black
BZ Bronze
SP Specify Premium Color
Voltage 120 208 277 347* 480*
Options
*For other CCT please consult factory
SV Silver
30 3000K
40 4000K
Height RP10 RP12 RP14 RP16 10 ft. 12 ft. 14 ft. 16 ft.
DM Dimming (0-10V)
HLxx1 Hi-Lo Switching
BL Semi-Matte Black
*Equipped with step-down transformer
Light Engine 2G350 350 mA/43W
2G500 500 mA/59W
2G700 700 mA/84W
2G900 900 mA/109W
2G105 1050 mA/123W
CCT
REC2 GFCI Receptacle w/ weather-proof cover
REC22 GFCI Receptacle w/ padlockable in-use cover
1120V, 240V, & 277V onlyREC32 USB & Duplex Receptacle w/weather-proof cover
REC42 USB & Duplex Receptacle w/weather-proofpadlockable in-usecover
2 See page 6 for details
Page 2 of 7 (Rev. 09/2020)
RRSL_ss_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ritorno Round Symmetrical LED
Reflective Shade - 36 5/8” x 35 3/4” (930mm x 908mm) minimum 3/16” (4.7mm) thick aluminum reflector shade painted white for maximum reflectivity. Supplied with drip groove around perimeter, to prevent rain marks on underside. Shade attached to fixture arms with low profile stainless steel hardware.
Fixture Arms - Three natural, marine grade stainless steel with bead-blasted finish, rigidly attach reflector shade to pole fitter.
Housing Cover - Heat-tempered flat glass lens protects LED light engine assembly. Continuous die cut silicone gasket creates sealed optic chamber for weather proofing, dust and insect control. Lens retainer can be removed for servicing. Five stainless steel socket head cap screws secure retainer in place.
LED Light Engine - High efficacy LED light engine with reported 60,000+ hour life until L70. Available with 3000K or 4000K CCT and a CRI of 80.
Optics - Symmetric reflector and flat glass lens focus lumen output on secondary reflector shade. Secondary reflector shade redirects light for even illumination without shadows.
LED Driver - High Power factor, High Efficiency constant current LED driver. 120-277VAC input. Protection class IP66.
Surge Protection - 3-Pole Surge protection device safeguards electrical components from indirect lightning strikes and surges up to (20kA and 10kV).
Pole Fitter - Die cast aluminum fitter secures fixture arms and reflective shade to pole. Tapered to continue lines from pole.
Pole - Pole to be aluminum and taper from 5” diameter at the bottom to 7” diameter at the top. Pole wall thickness to be minimum 0.156” thick, supplied with 3” x 5” hand hole, with cast 356 aluminum tempered to T6 condition reinforced frame, with integral ground lug connection and gasketed flush fitting door.
Base Cover - Standard two-piece base cover is made from die cast 356 alloy aluminum which is heat treated to produce a T6 temper, measuring 4 ½” (115mm) height by 12 ½” (316mm) diameter.
Hi-Lo Switching Option - Please see options page for details.
Power Cord - Pre-installed at factory. Please specify power cord length in accordance to height of the pole. Add 2 feet to power cord length if double mounting (2) is specified.
Exterior Luminaire Finish - Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultraviolet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI.
Standard exterior colors are White (WH), Black (BK), Semi-Matte Black (BL), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the Ritorno LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED array when installed and operated according to Selux instructions. For details, see “Selux Terms and Condition of Sale.”
Listings and Ratings: Luminaire and LED tested to IP65 and IESNA LM-79-08 standards. LED tested to LM-80 standards. Luminaire and LED tested at 25°C ambient temperature.
NRTL Listed (i.e. UL, CSA)
Visit selux.us for our LED End of Life recycling policy.
Specifications
35 3/4” (908mm)
36 5/8” (930mm)
6 1/2” (165mm)
For Buy American compliance on poles, please consult the factory.
Page 3 of 7 (Rev. 09/2020)
RRSL_ss_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ritorno Round Symmetrical LED
6 1/2” (165mm)
Wall (W)Single (1)
Mounting hardware and
anchorage designed and
supplied and installed by
others.
Mounting PlateFixture Arm
Cover
Set Screws (2 places)
Gasket
Tapped 3/8 - 16 hole for ground connector
Mounting
35 3/4” (908mm)
171 1/8” (4347mm)
27 1/8” (689mm)
35 3/4” (908mm)
36 5/8” (930mm)
8 1/2” (216mm)
29 7/16” (748mm)
41 5/8” (1057mm)
6 1/2” (165mm)
7 3/4” (197mm)8 1/2”
(216mm)
5 3/4” (146mm)
Mounted with (4x) 1/4 - 20 fasteners by others
Page 4 of 7 (Rev. 09/2020)
RRSL_ss_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ritorno Round Symmetrical LED
Bolt CircleUse caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown.
Ø 8 5/8” (219mm)
Galvanized Flat Washers
Ø4 11/16”(119mm)
Conduit Opening9 1/2” (235mm)
Hand Hole Location
Anchor Bolt Detail
Galvanized Heavy Hex Nut
Concrete footing designed and supplied by others
1/2” (13mm)for leveling
Galvanized Heavy Hex Leveling Nut
3 1/4”(82.5mm)
3/4” x 15”Galvanized Anchor Bolts
Pole Height
Wind Speed
70mph 80mph 90mph 100mph 110mph 120mph
10’ 16.70 12.34 9.31 7.19 5.62 4.42
12’ 13.60 9.86 7.27 5.46
14’ 10.13 7.06 5.02
16’ 8.25 5.53
Base Cover InformationRefer to pole specification sheets for construction details, anchorage information and additional options.
Standard Base Cover (BC3) Die-cast-aluminum, two-piece field installable base cover.
5 3/16” (131mm)
Ø5” (127mm)
Ø12 7/16” (316mm)
Height
Ritorno Reverse Taper Pole (5” to 7”)EPA values calculated as per AASHTO LTS4 2001, to include fixture.Consult factory for heights other than 12’.
All Poles are constructed per AASHTO standards for struc-tural supports for highway signs, luminaires and traffic signals as published in 1975, amended and adopted in 1985 and 1994.
A consideration of field conditions such as (but not limited to) wind zone, height, vibration must be given by the designer/specifier for the appropriate application.
Performance of poles is dependant upon proper support/attachment of pole to adequate foundation design. Selux does not design or offer recommendations for foundations. EPA values assume that the bottom of the pole is at grade level.
Call Selux (1-800-SELUXCS) if there are any questions, or for any assistance in determining suitability with appropriate fixtures.
Alternate Mounting Detail
Page 5 of 7 (Rev. 09/2020)
RRSL_ss_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ritorno Round Symmetrical LED
Standard Single Wiring
Wiring
0-10V Dimming Option (DM) Wiring 2G350, 2G500, 2G700, 2G105, 120-277V (347V and 480V available with step-down transformer)
347/480 V
L1
N
BLACK
WHITE
GREEN
FROMLINECORD
SURGEPROTECTOR
LIGHTENGINE
L1
N
BLACK
WHITE
GREEN
RED
FROMLINECORD
SURGEPROTECTOR
LIGHTENGINE
L2RELAY
120/240/277V. WHEN RED IS ENERGIZED, LIGHT OUTPUT WILL BE AT "LO" LEVEL.SPECIFY THE "LO" OUTPUT LEVEL BY SELECTING FROM THE TABLE BELOW.
FOR OTHER PERCENTAGE OUTPUT LEVELS, CONSULT FACTORY.
HI-LO SWITCHING OPTION (HLxx) WIRING
Hi-Lo Switching Option (HL) Wiring 2G350, 2G500, 2G700, 2G105, 120V, 240V, 277V. When red is energized, light output will be at “Lo” level. Standard HL level: HL50 = low output 50%
L1
N
BLACK
WHITE
GREEN
Dim(+)
RED
ORANGEDim(-)
FROMLINECORD
SURGEPROTECTOR
LIGHTENGINE
100% LIGHT OUTPUT AT 10V, DOWN TO 10% LIGHT OUTPUT AT 0V.
0-10V DIMMING WIRING FOR 120-270V
L1
N
BLACK
WHITE
GREEN
FROMLINECORD
SURGEPROTECTOR
AUTOTRANSFORMER
LIGHTENGINE
STANDARD WIRING FOR 347/4800V WITH NO ADDITIONAL OPTIONS
STANDARD WIRING FOR 347/480V
Page 6 of 7 (Rev. 09/2020)
RRSL_ss_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ritorno Round Symmetrical LED
Optional Accessories
(REC) GFCI RECEPTACLE DETAIL (120V)
(REC2) PADLOCKABLE IN-USE GFCI RECEPTACLE DETAIL (120V)
5/8” (15mm)
2 3/4” (70mm)
4 1/2” (114mm)
Pole (Generic View)
Cover shown in the closed position
(REC) GFCI RECEPTACLE DETAIL (120V)
(REC2) PADLOCKABLE IN-USE GFCI RECEPTACLE DETAIL (120V)
3 9/16” (91mm)
6 11/16” (170mm)
Pole (Generic View)
Cover shown in the closed position
2 1/4” (58mm)
REC and REC3 REC2 and REC4
GFCI Receptacle (REC) - 120V 15A GFCI duplex receptacle with weatherproof, self-closing cover; located 36” (915mm) o.c from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel (120V only).
GFCI Receptacle (REC2) - 120V 15A GFCI duplex receptacle with weatherproof, self-closing, padlockable in-use cover; located 36” (915mm) o.c. from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel (120V only).
USB & Duplex Receptacle (REC3) (not shown) - 120V 20A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5A, 5V USB outlets. With weatherproof, self-closing cover; located 36” (915mm) o.c from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.
REC3 does not incorporate GFCI (Ground Fault Circuit Interrupter) protection, and shall be powered by a GFCI protected branch circuit (by others).
USB & Duplex Receptacle (REC4) (not shown)- 120V 20A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5A, 5V USB outlets. With weatherproof, self-closing padlockable in-use cover; located 36” (915mm) o.c from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.
REC4 does not incorporate GFCI (Ground Fault Circuit Interrupter) protection, and shall be powered by a GFCI protected branch circuit (by others).
Page 7 of 7 (Rev. 09/2020)
RRSL_ss_v3.1
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2020, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Photometry
123W LED / 3000K CCT
Conversion ChartValues based on 16’ (4.9 m) mounting height
Mounting Height 10’ (3.0 m)12’ (3.7 m)14’ (4.3 m)16’ (4.9 m)18’ (5.5 m)
Multiply1.271.161.071.000.84
316
632
948
1264
1
Maximum Candela = 1264 Located At Horizontal Angle = 0, Vertical Angle = 25# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)
012 2.253 3.75 45 675
4
32.75
21.75
1
0
1
2
3
House Side Street Side
Distance In Units Of Mounting Heigh tValues Based On 16 Foot Mounting Heigh t
.1
.2
.5
1
2
Ritorno Round Symmetrical LED
Catalog #: RRSL-X-RPXX-2G105-30-XX-UNV Delivered Lumens: 6330Input Watts: 123W Efficacy: 51 lm/W CCT: 3048KCRI (Ra): 81.4Maximum candela of 1264 at 25°IES classification: Type VMounting Height: 16’ (4.9 m)BUG Rating: B2-U5-G1Power Factor: 0.994Total Harmonic Distortion: 8.72%
Model# Watts Delivered Lumens Lumens/Watt Light Engine Multiplier CCT Multiplier
RRSL-X-RPXX-2G350-30-XX-UNV 43.01 2545 59.2 0.402
RRSL-X-RPXX-2G500-30-XX-UNV 58.87 3472 59.0 0.548
RRSL-X-RPXX-2G700-30-XX-UNV 84.64 4670 55.2 0.738
RRSL-X-RPXX-2G900-30-XX-UNV 108.60 5670 52.2 0.896
RRSL-X-RPXX-2G105-30-XX-UNV 123.30 6330 51.3 1.000
RRSL-X-RPXX-2G350-40-XX-UNV 43.01 2656 61.8 0.402
RRSL-X-RPXX-2G500-40-XX-UNV 58.87 3623 61.5 0.548
RRSL-X-RPXX-2G700-40-XX-UNV 84.64 4873 57.6 0.738
RRSL-X-RPXX-2G900-40-XX-UNV 108.60 5917 54.5 0.896
RRSL-X-RPXX-2G105-40-XX-UNV 123.30 6606 53.6 1.000
Ritorno Round Symmetrical LED Lumen Matrix
300
0K
CC
T M
ulti
plie
r =
1.0
040
00
K C
CT
Mul
tip
lier
= 1.
043
LED CCT Prorate TableValues based on Flux Binning
CCT 3000K4000K
Theoretical Multiplier1.001.073