ring sizing guide - michael gabrielsyour ring size and ﬁnd your perfect ﬁt. print this paper,...

© MICHAEL GABRIELS SIZE 4 SIZE 4.5 SIZE 5 SIZE 5.5 SIZE 6 SIZE 7 SIZE 7.5 SIZE 8 SIZE 8.5 SIZE 6.5 SIZE 9 SIZE 9.5 SIZE 10.5 SIZE 10 SIZE 11.5 SIZE 11 SIZE 12 SIZE 12.5 SIZE 13 If you have a ring that already fits your finger well, use this chart to find the ring’s size. Just place your ring on these circles, until you are able to closely match the inside edge of the ring to one of the circles below. If the ring falls between two of the sizes, order the quarter size in the middle. Measure a Ring You Already Have 1 4 5 6 7 8 9 10 11 12 Measure Your Finger 3 One of the easiest ways to assess your ring size is to measure your finger with a strip of paper or string. 1. Start by cutting out a strip of paper that is approximately 3/4-inch wide and 4 inches long. 2. Wrap the paper around the base of the intended finger, and then mark where the paper overlaps. 3. Match the length of the paper to the lines below to determine your size. INSIDE CIRCUMFERENCE (MM) 46.8 49.3 51.9 54.4 57.0 59.5 62.1 64.6 67.2 RING SIZE When shopping for rings online, it's essential that you know your accurate ring size. Check out our list of three easy ways to determine your ring size and find your perfect fit. Print this paper, and make sure your print scale is set to 100 percent and the “fit to page” box is left unchecked in order to get an accurate measurement from the printout. HOW TO DETERMINE YOUR RING SIZE Ring Sizing Guide 1. Print this page. 2. Cut out the ring sizer to match the outline. 3. Cut a small slit on the dotted line. 4. Insert the pointed end through the slit just a bit. 5. Wrap the ring sizer snuggly around the widest part of the intended finger so that the numbers are visible. 6. Read the number that lines up with the slit, this is your ring size! Keep in mind that quarter sizes are also available if your sizer indicates that you are between whole and half sizes. Use a Paper Ring Sizer 2 When printed this should be One Inch or 30 Millimeters. If measurement is not accurate, ring size measurement will not be completed properly. 0 1 IN 0 30 MM CONFIRM PRINTED PAPER SIZE Measure this to ensure accuracy. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 YOUR SIZE

Upload: others

Post on 20-Jul-2020

1 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Ring Sizing Guide - Michael Gabrielsyour ring size and ﬁnd your perfect ﬁt. Print this paper, and make sure your print scale is set to 100 percent and the “ﬁt to page” box

�

SIZE4

�

SIZE4.5

�

SIZE5

�

SIZE5.5

�

SIZE6

�

SIZE7

�

SIZE7.5

�

SIZE8

�

SIZE8.5

�

SIZE6.5

�

SIZE9

�

SIZE9.5

�

SIZE10.5

�

SIZE10

�

SIZE11.5

�

SIZE11

�

SIZE12

�

SIZE12.5

�

SIZE13

If you have a ring that already fits your finger well, use this chart to find the ring’s size. Just place your ring on these circles, until you are able to

closely match the inside edge of the ring to one of the circles below. If the ring falls between two of the sizes, order the quarter size in the middle.

Measure a Ring You Already Have1

Measure Your Finger3

One of the easiest ways to assess your ring size is to measure your finger with a strip of paper or string.

1. Start by cutting out a strip of paper that is approximately 3/4-inch wide and 4 inches long.

2. Wrap the paper around the base of the intended finger, and then mark where the paper overlaps.

3. Match the length of the paper to the lines below to determine your size.

INSIDE CIRCUMFERENCE (MM)

46.8

49.3

51.9

54.4

57.0