rightfax and cisco. 2 cisco unity fax solutions: unity fax server f pstn remote access e1/fxs...
TRANSCRIPT
RightFax and CiscoRightFax and Cisco
2
Cisco Unity Fax Solutions: Unity Fax ServerCisco Unity Fax Solutions: Unity Fax Server
F
PSTN
Remote Access
E1/FXS
ExchangeMessage
Store
CiscoUnity Messaging
Server
CiscoUnity Fax
Server
T.38
OutlookClient
OutlookClient
WebClient
Cisco CallControl Server
3
Brooktrout Fax BoardsBrooktrout Fax Boards
► 4 Port Analog Card
► No IP support
► Full size PCI Card
► 8,16,24,32 Port E1/T.38
► Used in E1 or T.38 Mode
► Full size PCI Card
► Ethernet and E1 Ports
4
IP N
etw
ork
E1
Unity Fax Server Unity Fax Server TR1034 TDM ConfigurationTR1034 TDM Configuration
Remote Access
E1/FXS
PBX orRouter
MCS built-inLAN
BrooktroutTR1034
T38 Card
||||
||||
MCSServer
► When operating in TDM the Fax Server uses E1 for Fax reception
► Application access is via MCS Network Interface
► Can be used in a TDM/IP migration
Q.931
5
Unity Fax Server Unity Fax Server TR114 Analog ConfigurationTR114 Analog Configuration
E1/FXS
RouterPOTS Dial-peer
for Fax
MCS NetworkCard
BrooktroutTR114
||||
||||
SIP
MCSServer
► When operating in T.38 mode the Fax Server uses two network connections
► SIP and Application access on MCS Network Interface
► RTP/Media is sent to Brooktrout Ethernet Interface
E1
6
RTP
Unity Fax Server Unity Fax Server TR1034 T.38 ConfigurationTR1034 T.38 Configuration
Remote Access
E1/FXS
Router(T.38dial-peer points
at MCS Network Card) MCS Network
Interface
BrooktroutTR1034
T38 Card
||||
||||
SIPSIP
RTP
MCSServer
► When operating in T.38 mode the Fax Server uses two network connections
► SIP and Application access on MCS Network Interface
► RTP/Media is sent to Brooktrout Ethernet Interface
E1
7
Unity Fax Server Unity Fax Server TR1034 T.38 ConfigurationTR1034 T.38 Configuration
IOS Router
Cisco Fax Server (CFS)
► In this network we want route fax calls from the fax to the CFS server using SIP
► We want to route all 4 digit DNs starting with 5 to the CFS
► We need to build dial peers in the router to achieve this
FaxDN=8000
DN=5xxx
10.1.1.0/24
.254 .207 .208
5xxx8000FXS
8
Basic Router ConfigurationBasic Router Configuration
hostname Voice_gateway
enable password cisco
interface FastEthernet0/0
ip address 10.1.1.254 255.255.255.0
duplex auto
speed auto
no shut
line vty 0 4
exec-timeout 120 0
password cisco
login
Set Host Name
Enable Password
Ethernet Interfaceconfiguration
Telnet Configuration
9
PSTN to IOS Inbound ConfigPSTN to IOS Inbound Config
dial-peer voice 5000 voip
description Cisco Fax Server Calls
destination-pattern 5...
session protocol sipv2
session target ipv4:10.52.200.207
session transport udp
codec g711ulaw
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
VOIP Dial Peer Tag
Destination Patternto match
Specify SIP as call control protocol
IP address of RF Server (NOT BT Card)
Configure SIP to use UDP packets
Set the default codec for this dial-
peer
Set Fax relay mode to T.38
Alternatively "voice service voip" and "Voice class codec" could be used for Fax and codec selection
10
Unity Fax Server Unity Fax Server TR1034 T.38 ConfigurationTR1034 T.38 Configuration
IOS Router
Cisco Fax Server (CFS)
► We want to route all 4 digit DNs starting with 8 to the PSTN
► We need to build dial peers in the router to achieve this
FaxDN=8000
DN=5xxx
10.1.1.0/24
.254 .207 .208
5xxx8000FXS
11
PSTN to IOS Inbound ConfigPSTN to IOS Inbound Config
dial-peer voice 8000 pots
destination-pattern 8...
no digit-strip
port 1/0/0
dial-peer voice 1 voip
description generic incoming dial-peer
incoming called-number .T
codec g711ulaw
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
POTS Dial Peer Tag
Destination Patternto match
Specify SIP as call control protocol
Inbound VOIP dial-peer
Match all in boundVOIP Calls
Set the default codec for this dial-
peer
Set Fax relay mode to T.38
Alternatively "voice service voip" and "Voice class codec" could be used for Fax and codec selection
12
Unity Fax Server Unity Fax Server Call Manager DeploymentCall Manager Deployment
Cisco CallManager
Multi-FunctionDocument
Device
Cisco FaxServer
MessagingServer
Cisco UnityServer
FaxClient
H.323 SIP(T.38)
EmailClient
13
.208
Unity Fax Server Unity Fax Server TR1034 T.38 ConfigurationTR1034 T.38 Configuration
IOS Router
Cisco Fax Server (CFS)
► If we need to also route calls to a Cisco Call manager we add a H.323 dial-peer to the router
FaxDN=8000
DN=5xxx
10.1.1.0/24
.254 .207
5xxx8000FXS
Call Manager IP Phones
2xxx
.201
14
PSTN to IOS Inbound ConfigPSTN to IOS Inbound Config
dial-peer voice 2000 voip
description Dial-Peer to Call manager
destination-pattern 2...
session target ipv4:10.52.200.201
codec g711ulaw
POTS Dial Peer Tag
Destination Patternto match
IP Address ofCall Manager
Set the default codec for this dial-
peer
Alternatively "voice service voip" and "Voice class codec" could be used for Fax and codec selection