ride quality all you need is a hoistway - sweets

RIDE QUALITYAll you need is a hoistway

Self-contained system

Green technology Smoothest ride

Minimal jobsitecoordination

Proven reliability

Open the door to complete design freedom.

No control room. No machine room.

All you need is a hoistway.

Otis knows that it’s not just any building—it’s your building. With the Gen2®

system, we re-examined every aspect of the elevator—from design and

installation to operation and maintenance. The result is a system that moves

elevator innovation to a new level, supporting your design vision in a way that

only Otis can.

Otis Gen2 Delivers:

2

A SMARTER wAY TO hOIST

Patented, coated-steel belts

have a significantly smaller

bending radius than wire rope.

This enables a compact

gearless machine.

cOMPAcT GEARLESS MAchINE

Flexible belts allow a smaller sheave,

creating a machine that is 70 percent

smaller and up to 50 percent more

efficient than conventional geared

machines.

INTELLIGENTENGINEERING

Otis applied the strength of

its worldwide engineering

resources to redefine the

elevator system and set a

new benchmark for design

and performance.

3

RIDE QUALITYSELf-cONTAINED SYSTEM

Gen2 redefined the elevator with breakthrough belt technology.

Conventional geared elevator systems require

a rooftop machine room to house the machine,

governor and controller.

New advances in hoisting technology eliminate

the need for a machine room. But these systems

still require a separate room for the elevator

control system.

1

cONvENTIONAL GEARED ELEvATOR

2

cONvENTIONAL MAchINE- ROOMLESS ELEvATOR

cOMPAcT cONTROLLER

The Gen2 system controller

is compact enough to fit

inside the wall of the top

elevator landing.

INSPEcTION & TEST PANEL

Most necessary test and

maintenance features are

concealed behind a panel

in the elevator entrance.

SMALLEST hOISTwAY

Gen2 leads the industry with

the shallowest pit and lowest

overhead, fitting into most

hydraulic hoistways.

LowestOverhead

Otis Competitor

Shallowest Pit

4

The revolution continues.

3

With Gen2, all you need is a hoistway. The controller is

so compact it fits inside the wall of the top elevator landing.

You are no longer required to plan for extra room for elevator

components.

CompaCt design and integrated Components provide:

• Greater architectural design freedom

• Space-saving configuration for more rentable space

• Less moving parts for greater durability and reliability

• Minimal jobsite coordination

GEN2 ELEvATOR

Innovation meets sustainability.

Otis is leading the industry with The Way to Green. It begins

with green thinking on a global scale. We encourage and

enable our more than 60,000 employees worldwide to

address the future positively and proactively. It is all a part

of our end-to-end commitment to incorporating environmental

awareness into everything we do. The Gen2 system with its

state-of-the-art energy-efficiency is a result of this thinking.

NO LUbRIcATION

The Gen2 machine

and coated steel belts

require no additional

lubrication, eliminating

the need for storage,

cleanup and disposal

of hazardous waste.

cLEAN MANUfAcTURING

We select all components

for optimal performance and

minimal environmental impact.

Gen2 elevators use low VOC

paints, safer adhesives, and

we recycle nearly 97% of our

industrial waste.

The Gen2 system—combined with

our ReGen® drive, LED lighting and

automatic sleep mode— maximizes

energy efficiency.

MAxIMIzED EffIcIENcY

car Lighting

control Systems

Machine + Drive

5000

4000

3000

2000

1000

based on 2500 lb at 150 ft/min, 8 stops and 200,000 starts/yr

Tota

l en

ergy

con

sum

ptio

n (

kwh

/yr)

hydraulicsystem

Gearedsystem

Gearless system

5

GREEN TEchNOLOGY

EffIcIENT LED LIGhTING

LED illumination, standard on the Gen2

system, reduces energy consumption

and lasts up to 10 times longer than

conventional fluorescent lamps.

SLEEP MODE

Lights and fan are shut down when there’s

no demand, making the LED lighting up

to 80% more efficient than conventional

lighting. The system seamlessly springs

back to life with the press of a call button.

Regenerative technology

Our ReGen Drive, now standard on the Gen2 System, puts electricity back into your building’s grid by capturing normally wasted energy. Thanks to low harmonic distortion, this recycled energy provides clean power minimizing impact to your buildings electrical system. All this helps make the Gen2 system up to 75% more efficient than conventional systems. And from an energy consumption standpoint, the Gen2 system uses up to 40% less energy than non-regenerative machine-roomless systems.

with the Otis ReGen drive:

Energy created by your elevator is captured by the ReGen drive and is put to use—it’s fed into your building’s electrical grid.

US

ES

EN

ER

GY

Energy iscapturedand used.

CR

EA

TE

S E

NE

RG

Y

6

Green Technology. Standard on the Gen2 system.

because being green is not optional.

A ride so smooth, you’ll notice. Or maybe you won’t.

By taking an in-depth look at all sources of

noise and vibration, Otis engineers designed

the Gen2 system with passenger and tenant

comfort in mind.

The Gen2 system’s ride quality is so smooth

and quiet that passengers often don’t notice

it at all.

SMOOTh OPERATION

The Gen2 system’s method of hoisting

- coated-steel belts - eliminates the

metal-on-metal contact of steel ropes

and sheaves used by traditional systems.

The result is a ride experience with

noticeably less vibration and noise.

INDUSTRY cOMPARISON

Careful component design and selection

enabled Otis to engineer a remarkably

smooth and quiet elevator. This means

a more comfortable passenger experience

as well as quiet operation that is critical

to those tenants located near the

elevator system.

5045

75

25 28

65

2012

55

vertical vibration[milli-g]

Industry hydraulic system

Industry geared system

Gen2 machine-roomless

horizontal vibration[milli-g]

car Noise[dBA]

7

SMOOThEST RIDE

Efficient. Seamless. Minimal impact on the jobsite.

With a short lead time and all major components located inside the hoistway,

the Gen2 system allows for more flexibility and reduced cost.

SAVE CONSTRUCTION TIME AND COST

The Gen2 system doesn’t require a control room

to be built, saving time and material cost on the

jobsite. And because its hall call buttons are

mounted in the door jamb, even more time is

saved – there’s no longer a need to coordinate

with numerous trades on the jobsite.

THE INDUSTRY’S SHORTEST LEAD TIME

Coordinating a construction project is complex. If something changes and the jobsite

is not ready for the elevator when it arrives, you’ll likely have to pay costly storage

and remobilization fees. The Gen2 system has an industry-leading lead time of six

weeks, allowing you the flexibility to more accurately plan your project.

Order is placedGen2 6 weeks

Industry System 10 to 12 weeks

Time to elevator delivery

up to 50% less time

8

MINIMAL JOBSITE COORDINATION

63800_OTIS_16pg.indd 10 7/14/11 8:44 AM

OMMS®

The Otis Maintenance Management System (OMMS)

is a predictive and preventative system, ensuring fewer

service calls and less downtime than any other plan

in the industry. We’ll focus on your elevator so you

can focus on your building.

OTIS ELITESM

Otis Elite service takes elevator service to a new level. Elite

experts dedicated to your elevator provide industry-leading

response time because they are able to remotely interact with

your elevator. They’re able to make changes to your elevator

and provided critical information with real-time status updates.

Elite service provides guaranteed 15-minute response time,

instant information and unprecedented control.

Industry-leading service that only Otis can provide.

PULSE®

The Pulse system provides safety and peace of mind

with 24/7 monitoring of the Gen2’s flat coated-steel belts.

It provides advance notice of belt wear by detecting

the slightest weakness.

Otis is committed to ensuring optimal equipment performance throughout each

product’s lifecycle. Innovative technologies let Otis engineers precisely identify

or anticipate possible issues. And when our mechanics arrive at customer sites,

they are prepared to make repairs quickly and efficiently.

9

PROvEN RELIAbILITY

At Otis, reliability is the hallmark of

exceptional design.

Gen2 is the culmination of Otis’ commitment to perfecting elevator

technology. With flexible coated-steel belts and lubrication-free,

energy efficient components, Gen2 sets the benchmark for elevator

design and performance. From our industry-leading safety record to

our proven reliability, Gen2 is the traction elevator you can count on.

10

aHd

eF

B g J i KC

L

dimensions

Rated lbs. 2100 2500 3000 3500

Passenger capacity (USA/canada) 13/12 16/15 20/18 23/21

Car1

a Interior Width 5’ 8-5⁄16” 6’ 5-9⁄16”

B Interior depth2 4’ 3-9⁄16” 5’ 0-3⁄16” 5’ 5-9⁄16”

C Cab height3 7’-9”

d Car door width 3’-0” 3’-6”

Hoistway

e Single width 7’-7” 8’-4”

in seismic zones 7’-9” 8’-6”

F Double width 15’-6” 17’-0”

in seismic zones 15’-10” 17’-4”

g Depth4 5’-9” 6’-4” 6’-11”

in seismic zones 5’-9” 6’-4” 6’-11”

H Rough opening width 5’-2”

i Rough opening height 7’-10”

J Clear opening height 7’-0”

K Clear overhead to safety beam5

Min6 12’-7”Max 14’-7”

L Min pit depth7 4’-0”/ 5’-0”

Control Closet/room8 (optional)

m Control closet–simplex H x 3’-10”

Control room–simplex H x 5’-9”

Control room–simplex H x 7’-6”

1. Interior dimensions may vary depending on interior finishes.

2. For systems with front and rear openings, add 1⁄4” to depth dimension.

3. Clear cab height varies by ceiling type and floor recess.

4. For systems with front and rear openings, add 6-1⁄4” to 2100, 2500 and 3500 lb 7-7⁄8 to 3000 lb.

5. Allow a minimum of 4" between top of safety beam and top of hoistway.

6. In seismic areas, overhead = 12'-11".

7. Some locations require a 5'-0" pit, contact your local Otis sales representative for details.

8. Please consult your local Otis representative regarding smaller dimensions.

Travel height maximum 80’ 100’

Maximum stops 10 13

Speed (ft/min) 150 200

11

m

g

GEN2 SPEcIfIcATIONS

IMPORTANT: To assist in your

planning, we recommend that

you call your Otis representative

at the beginning of the project.

dimensionsRated lbs. 2100 2500 3000 3500 4000Passenger capacity 13/12 16/15 20/18 23/21 27/25

Car

a Interior width 5’-8” 6’-8” 7’-8”B Interior depth1 4’-3” 4’-3” 4’-8 7⁄8” 5’-4 13⁄16” 5’-4 13⁄16”C Interior height 8’-0” (Optional 10’)d Car door width 3’-0” 3’-6” 4’-0”

Hoistway

e WidthSingle hoistway 7’-6” 8’-6” 8’-8” 8’-8” 9’-8”In seismic zones 7’-8” 8’-8” 8’-8” 8’-8” 9’-8”

F Double hoistway 15’-4” 17’-4” 17’-8” 17’-8” 19’-8”In seismic zones 15’-8” 17’-8” 17’-8” 17’-8” 19’-8”

g Triple hoistway 23’-2” 26’-2” 26’-8” 26’-8” 29’-8”In seismic zones 23’-8” 26’-8” 26’-8” 26’-8” 29’-8”

H Depth2 5’-9” 5’-9” 6’-3” 6’-11” 6’-11”In seismic zones2 5’-9” 5’-9” 6’-3” 6’-11” 6’-11”

i Rough opening width 4’-8” 5’-2” 5’-2” 5’-2” 5’-8”J Rough opening height 7'-10" (8’-10” if 8 feet doors)K Clear opening height 7’-0” (Optional 8’-0”)L Clear overhead for 8'-0"car3

Minimum 13’-2” (200 fpm) 14’-6” (350 fpm)Maximum 15’-2” (200 fpm) 16’-6” (350 fpm)Clear overhead for 10'car3

Minimum 15’-2” (200 fpm) 16’-6” (350 fpm)Maximum 17’-2” (200 fpm) 18’-6” (350 fpm)

m Minimum pit depth4 5’-0” (200 fpm) 5’-6” (350 fpm)

Control Closet/room5

n Control closet–simplex H x 3’-10”Control room–simplex H x 5’-9”Control room–duplex H x 7’-6”

1. For systems with front and rear openings,

add 3⁄4” to depth dimension.

2. For system with front and rear opening,

add 5 7⁄8” to 2100 and 2500 lb, add 5 3⁄4”

to 3000, 3500, and 4000 lb.

3. Allow a minimum of 4” between top of hoist

beam and top of hoistway.

4. Maximum pit depth is 10’-4” with blocking

supplied from factory.

5. Please consult your local Otis representative

regarding smaller dimensions.

IMPORTANT: To assist in your

planning, we recommend that

you call your Otis representative

at the beginning of the project.

PLAN

SEcTIONaid

eF

g

n

H m

K J LCB H

Travel height maximum 131’

Maximum stops 15

Speed (ft/min) 350

12


2. For elevators with occupied space below, this dimension may change. Consult your local Otis representative for dimensions.


passenger eLevators Front opening dimensions Front and rear opening dimensions

Rated lbs. 2500 3000 3500 4000 2500 3000 3500 4000

Passenger capacity (USA/canada) 16/15 20/18 23/21 27/25 16/15 20/18 23/21 27/25

Car3

a Interior width 6'-8 5⁄16" 6'-8 5⁄16" 6'-8 5⁄16" 7'-8 5⁄16" 6'-8 5⁄16" 6'-8 5⁄16" 6'-8 5⁄16" 7'-8 5⁄16"

B Interior depth 4'-31⁄8" 4'-9" 5'-5" 5'-5" 4'-3 3⁄4" 4'-9 5⁄8" 5'-5 5⁄8" 5'-5 5⁄8"

C Interior height 8'-0" (Optional 9'-7")

d Car door width 3'-6" 3'-6" 3'-6" 4'-0" 3'-6" 3'-6" 3'-6" 4'-0"

Hoistway

e Width2

Single hoistway 8'-4" 8'-4" 8'-4" 9'-4" 9'-4" 9'-4" 9'-4" 10'-4"

In seismic zones 8'-6" 8'-6" 8'-6" 9'-6" 9'-6" 9'-6" 9'-6" 10'-6"

F Double hoistway 17'-0" 17'-0" 17'-0" 19'-0" 19'-0" 19'-0" 19'-0" 21'-0"

In seismic zones 17'-4" 17'-4" 17'-4" 19'-4" 19'-4" 19'-4" 19'-4" 21'-4"

g Triple hoistway 25'-8" 25'-8" 25'-8" 28'-8" 28'-8" 28'-8" 28'-8" 31'-8"

In seismic zones 26'-2" 26'-2" 26'-2" 29'-2" 29'-2" 29'-2" 29'-2" 32'-2"

H Depth 6'-6" 7'-0" 7'-81⁄2" 7'-81⁄2" 6'-2 7⁄8" 6'-8 3⁄4" 7'-4 3⁄4" 7'-4 3⁄4"

In seismic zones 6'-6" 7'-0" 7'-81⁄2" 7'-81⁄2" 6'-2 7⁄8" 6'-8 3⁄4" 7'-4 3⁄4" 7'-4 3⁄4"

i Rough opening width 5'-2" 5'-2" 5'-2" 5'-8" 5'-2" 5'-2" 5'-2" 5'-8"

J Rough opening height 7'-10" (8’-10” if 8-foot doors)

K Clear opening height 7'-0" (Optional 8'-0")

L Total overhead for 8'-0"car

@ 400 ft/min 16'-0"

@ 450 ft/min 16'-5"

@ 500 ft/min 16'-10"

Total overhead for 9'-7"car

@ 400 ft/min 17'-7"

@ 450 ft/min 18'-0"

@ 500 ft/min 18'-5"

m Minimum pit depth

@ 400 ft/min 5'-8"

@ 450 ft/min 6'-2"

@ 500 ft/min 6'-9"


n Control closet–simplex H x 3'-10" width

Control room–simplex H x 5'-9" width

Control room–duplex H x 7'-6" width H x 9'-11" H x 7'-6" width H x 9'-11"

Buffer

aid

B H C K J

mH

n

L

e

F

g

PLAN

SEcTION

13

Travel height maximum 300’

Maximum stops 28

Speed (ft/min) 400, 450, 500

GEN2 SPEcIfIcATIONS


2. For elevators with occupied space below, this dimension may change. Consult your local Otis representative for dimensions.


serviCe eLevators Front opening dimensions Front and rear opening dimensions

Rated lbs. 4000h 4500h 5000h 5000h 4000h 4500h 5000h 5000h AIA

Passenger capacity (USA/canada) 27/25 30/28 33/31 33/31 27/25 30/28 33/31 33/31

Car3

a Interior width 5'-8 5⁄16" 5'-8 5⁄16" 5'-11 5⁄16" 5'-8 5⁄16" 5'-8 5⁄16" 5'-8 5⁄16" 5'-11 5⁄16" 5'-8 5⁄16"

B Interior depth 7'-5" 7'-11" 8'-6" 9'-0" 7'-5 5⁄8" 7'-11 5⁄8" 8'-6 5⁄8" 9'-0 9⁄16"

C Interior height 8'-0" (Optional 9'-7")

d Car door width 4'-0" 4'-0" 4'-6" 4'-0" 4'-0" 4'-0" 4'-6" 4'-0"

Hoistway

e Width2

Single hoistway 8'-2" 8'-2" 8'-5" 8'-2" 8'-2" 8'-2" 8'-5" 8'-2"

In seismic zones 8'-4" 8'-4" 8'-7" 8'-4" 8'-4" 8'-4" 8'-7" 8'-4"

F Double hoistway 16'-8" 16'-8" 17'-2" 16'-8" 16'-8" 16'-8" 17'-2" 16'-8"

In seismic zones 17'-0" 17'-0" 17'-6" 17'-0" 17'-0" 17'-0" 17'-6" 17'-0"

g Triple hoistway 25'-2" 25'-2" 25'-11" 25'-2" 25'-2" 25'-2" 25'-11" 25'-2"

In seismic zones 25'-8" 25'-8" 26'-5" 25'-8" 25'-8" 25'-8" 26'-5" 25'-8"

H Depth 9'-0" 9'-6" 10'-1" 10'-7" 9'-10 5⁄8" 10'-4 5⁄8" 10'-11 5⁄8" 11'-5 9⁄16"

In seismic zones 9'-0" 9'-6" 10'-1" 10'-7" 9'-10 5⁄8" 10'-4 5⁄8" 10'-11 5⁄8" 11'-5 9⁄16"

i Rough opening width 5'-8 1/2" 5'-8 1/2" 6'-2 1/2" 5'-8 1⁄2" 5'-8 1⁄2" 5'-8 1⁄2" 6'-2 1⁄2" 5'-8 1⁄2"

J Rough opening height 7'-10" (8’-10” if 8-foot doors)

K Clear opening height 7'-0" (Optional 8'-0")

L Total overhead for 8'-0"car

@ 200 ft/min 14'-9 3⁄16"

@ 350 ft/min 15'-5 9⁄16"

@ 400 ft/min 16'-0"

@ 450 ft/min 16'-5" - - 16'-5" - -

@ 500 ft/min 16'-10" - - - 16'-10" - - -

Total overhead for 9'-7"car

@ 200 ft/min 16'-4 3⁄16"

@ 350 ft/min 17'-0 9⁄16"

@ 400 ft/min 17'-7"

@ 450 ft/min 18'-0" 18'-0"

@ 500 ft/min 18'-5" - - - 18'-5" - - -

m Minimum pit depth

@ 200 ft/min 4'-11 1⁄4"

@ 350 ft/min 5'-5 1⁄4"

@ 400 ft/min 5'-8"

@ 450 ft/min 6'-2" - - 6'-2" - -

@ 500 ft/min 6'-9" - - - 6'-9" - -


n Control closet–simplex H x 3'-10" width

Control room–simplex H x 5'-9" width

Control room–duplex H x 9'-11" width (for >350 fpm)

Buffer

aid

B H C K J

mH

n

L

e

F

g

PLAN

SEcTION

Travel height maximum 196’ 300’

Maximum stops 24 28

Speed (ft/min) 200 350, 400, 450, 500

14

ride quality all you need is a hoistway - sweets

Documents