ricoh priport jp5000
DESCRIPTION
Operating instructionsTRANSCRIPT
-
Read thisreference.For safety, please follow the instructions in this manual.TPEH162N
manual carefully before you use this product and keep it handy for futureJP5000
OPERATING INSTRUCTIONS
-
JP5000 OPERA
TING
INSTRU
CTIO
NS
RICOH COMPANY, LTD.15-5, 1 chome, Minami-Aoyama,Minato-ku, Tokyo 107, JapanTelephone: Tokyo 3479-3111
OU.S.A.RICOH 5 DedricWest Ca(TEL) 97NetherlRICOH EUROGroenelaan 31180 AC - Amstelveen Holland(TEL) 020-5474111United KingdomRICOH U.K. LTD.Ricoh House1 Plane Tree Crescent,Middlesex, TW13 7HG(TEL) 181-261-4000GermanyRICOH DEUTSCHLANMergenthalerallee 38-465760 Eschborn(TEL) (06196) 906-0SingaporeRICOH ASIA PACIFIC #15-01/02 The Heeren,260 Orchard Road,Singapore 238855(TEL) 65-830-5888
(zona Basson) - 37139 VERONA
Printed in JapanUE USA C2298607 Feltham,
D GMBH0,
PTE. LTD.
(TEL) 045-851 00 44Hong KongRICOH HONG KONG LTD.23/F., China Overseas Building,139, Hennessy Road,Wan Chai, Hong Kong(TEL) 2862-2888FranceRICOH FRANCE S.A.383 Avenue du Gnral de Gaulle,B.P. 307, 92143 Clamart Cedex(TEL) 01-4094-3838PE B.V. P.O. Box 114
ItalyRICOH ITALIA S.p.A.Via della Metallurgia, 12verseas Affiliates
CORPORATIONk Placeldwell, New Jersey 070063-882-2000
ands
SpainRICOH ESPAA S.A.Guitard, 4508014 Barcelona(TEL) 490-09-60
-
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To getmaximum versatility from this machine all operators should carefully read and follow the instructions inthis manual. Please keep this manual in a handy place near the machine.Please read the Safety Information before using this machine. It contains important information relatedto USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Power Source:
120 V, 60 Hz, 2.7 A or morePlease be sure to connect the power cord to a power source as above. For details about power source,see P.194 Power connection.
Notes:
Some illustrations might be slightly different from your machine.Certain options might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the Inch version.
For good print quality, Ricoh recommends that you use genuine Ricoh master and ink.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts otherthan genuine Ricoh parts in your Ricoh office product.
-
Note to users in the United States of America
Notice:
This equsuant toharmfulgeneratwith thethis equrequired
Warnin
Changethe user
Note to
Warnin
This Cla
Remarq
Avertiss
Cet app
In accoraaaa mbbbb m Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against interference when the equipment is operated in a commercial environment. This equipmentes, uses, and can radiate radio frequency energy and, if not installed and used in accordance instruction manual, might cause harmful interference to radio communications. Operation ofipment in a residential area is likely to cause harmful interference in which case the user will be to correct the interference at his own expense.
g
s or modifications not expressly approved by the party responsible for compliance could void's authority to operate the equipment.
users in Canada
g:
ss A digital apparatus compiles with Canadian ICES-003.
ue concernant les utilisateurs au Canada
ement:
areil numrique de la classe A est conforme la norme NMB-003 du Canada.
dance with ISO Standard 7001, this machine uses the following symbols for the main switch: eans POWER ON.eans POWER OFF.
Copyright 1998 Ricoh Co., Ltd.ipment has been tested and found to comply with the limits for a Class A digital devices, pur-
-
Safety Information
When using your machine, the following safety precautions should always befollowed.
SafetIn this
Exam
R WA
R CAi
y During Operation manual, the following important symbols are used:
ples Of Indications
RNING:Ignoring this warning could cause serious injury or even death.
UTION:Ignoring this caution could cause injury or damage to property.
Symbols R mean a situation that requires you take care.
Do NOT carry out the operation represented by this symbol m.This example means Do not take apart.
Symbols $ mean you MUST perform this operation.This example means You must remove the wall plug.
-
ii
RRRRWarning:
Only connect the machine to the power source described onthe inside front cover of this manual. Avoid multi-wiring. Do not damage, break or make any modifications to the pow-
er cord. Do not place heavy objects on it, pull it hard or bendit more than necessary. These actions could cause an elec-tric shock or fire.
Do not plug or unplug the power cord with your hands wet.Otherwise, an electric shock might occur.
Make sure the wall outlet is near the machine and freely ac-cessible so that in event of an emergency it can be un-plugged easily.
Do not remove any covers or screws other than those spec-ified in this manual. Some parts of the machine are at a highvoltage and could give you an electric shock. When the ma-chine needs to be checked, adjusted, or repaired, contactyour service representative.
Do not take apart or attempt any modifications to this ma-chine. There is a risk of fire, electric shock, explosion or lossof sight.
If the machine looks damaged or breaks down, smoke iscoming out, there is a strange smell or anything looks un-usual, immediately turn off the main switch then unplug thepower cord from the wall. Do not continue using the ma-chine in this condition. Contact your service representative.
If metal, liquid or foreign matter falls into the machine, turnoff the main switch and unplug the main power cord. Con-tact your service representative. Do not keep using the ma-chine with a fault or defect.
Do not put any metal objects or containers holding water(e.g. vases, flowerpots, glasses) on the machine. If the con-tents fall inside the machine, a fire or electric shock couldoccur.
-
RRRRCaution:
Keep the machine away from humidity and dust. A fire or an elec-tric shock might occur.iii
Do not place the machine on an unstable or tilted surface. If it top-ples over, it could cause injury.
After you move the machine, fix it with the caster fixture. Other-wise, the machine might move or come down to cause a personalinjury.
When you move the machine, unplug the power cord from thewall outlet to avoid fire or electric shock.
When the machine will not be used for a long time, unplug thepower cord.
When you pull out the plug from the socket, grip the plug to avoiddamaging the cord and causing fire or electric shock.
If you use the machine in a confined space, make sure there is acontinuous air turnover.
Do not reuse stapled paper. Do not use aluminum foil, carbon-containing paper or other conductive paper. Otherwise, a firemight occur.
This machine has been tested for safety using this supplier'sparts and consumables. We recommend you only use thesespecified supplies.
This equipment is only to be installed by a qualified service per-sonnel.
Deliver to collection point for waste products. Do not be disposedof via domestic refuse collection.
If ink comes into contact with your eyes, rinse immediately in run-ning water. In the case of any abnormal symptoms, consult adoctor.
-
iv
Keep the ink or ink container out of reach of children. If ink is ingested, force vomiting by drinking a strong saline solu-tion and consult a doctor immediately.
Be careful not to cut yourself on any sharp edges when you reachinside the machine to remove misfed sheets of paper or masters.
While printing, do not touch the belt at the end of the paper deliv-ery tray or the job separator. You might be injured.
When your machine is equipped with the PC controller option: Do not place this equipment on an unstable or tilted surface. If
you do, it could fall. Do not place heavy objects on top of this equipment. They
might cause the equipment to become unstable and toppleover.
When your machine is equipped with the PC controller option: If by any chance this equipment falls over or a breakage oc-
curs (e.g., the cover), turn off the main switch of this equip-ment, unplug the power cable and contact your servicerepresentative. If you continue to use the equipment in thisstate it could result in fire or electric shock.
-
How To Read This Manual
Symbols
In this
R WAThis sdeath structiscribe
R CAThis synor orwhen symboInform* The s
ImpIf thisdamag
PreThis serating
NotThis seration
LimThis sor con
RefThis s
[ ]Keys t
{ }Keys bv
manual, the following symbols are used:
RNING:ymbol indicates a potentially hazardous situation that might result inor serious injury when you misuse the machine without following the in-ons under this symbol. Be sure to read the instructions, all of which are de-d in the Safety Information section.
UTION:mbol indicates a potentially hazardous situation that might result in mi-
moderate injury or property damage that does not involve personal injuryyou misuse the machine without following the instructions under thisl. Be sure to read the instructions, all of which are described in the Safetyation section.tatements above are notes for your safety.
ortant instruction is not followed, paper might be misfed, originals might beed, or data might be lost. Be sure to read this.
parationymbol indicates the prior knowledge or preparations required before op-
.
eymbol indicates precautions for operation, or actions to take after misop-
.
itationymbol indicates numerical limits, functions that cannot be used together,ditions in which a particular function cannot be used.
erenceymbol indicates a reference.
hat appear on the machine's panel display.
uilt into the machine's operation panel.
-
vi
Making Prints
Before making prints using this ma-chine, you have to make a master bypressipress scans mastehow to
A Set
Whexp
A S
Whopt
A S
B Press the {{{{Start}}}} key.
ng the {Start} key. When youthe {Start} key, the machine
the original image and makes ar. This procedure describes make basic prints.
your originals.
en you set original on the osure glass (contact glass)et one original face down.
en you set originals in the ional document feeder
et the originals face up.
C Press the {{{{Proof}}}} key.
Check the print image.
ReferenceWhen you want to change theimage position, see P.25 Ad-justing Print Image Position.
When you want to increase theimage density, press the {W}key. See P.26 Adjusting PrintImage Density.When you want to decrease theimage density, press the {V}
TPEH270E
TPEH281E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES060N
TPES560E
-
key. See P.26 Adjusting PrintImage Density.
D Entprin
E Pre
Whpreousclea
Co
1vii
er the desired number ofts with the Number keys.
ss the {{{{Print}}}} key.
en the print job has finished,ss the {Clear Modes} key. Previ-ly entered job settings will bered.
mbine Class Slow FastSpeed
TPES100N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES070N
-
viii
What You Can Do With This Machine
vvvv Standard PrintingSee P.20 Standard Printing.
vvvv AdjSeePos
*: P
vvvv AdjSeeDen
vvvv HalfSeePrin
vvvv ChaSeeSpe
vvvv Reducing And Enlarging Using PresetRatiosusting Print Image Position P.25 Adjusting Print Imageition.
aper feed direction
usting Print Image Density P.26 Adjusting Print Imagesity.
tone Printing P.27 Tint ModeHalftoneting.
nging The Printing Speed P.28 Changing The Printinged.
See P.30 Preset Reduce/En-largeReducing And Enlarging Us-ing Preset Ratios.
vvvv Having The Machine Choose The Re-production RatiosSee P.32 Auto Magnification Se-lectionHaving The Machine ChooseThe Reproduction Ratios.
vvvv Reducing And Enlarging In 1 % StepsSee P.35 ZoomReducing AndEnlarging In 1 % Steps.
GRPOSI0E
GRTINT0E
GRRATI0E
GRAUTO0E
GRZOOM0E
-
vvvv Stretching And Squeezing The ImageIn 1 % StepsSee P.37 Directional Magnifica-tionStretching And Squeezing TheImage In 1 % Steps.
vvvv EraSeeEdg
vvvv PrinSeeKin
vvvv SeleinalSeeMa
vvvv SavSeeing
vvvv MakStroSeeMa
vvvv MakFroStoSeeing
The Same Original Using All StoredData.ix
sing Edge Margins P.40 Edge EraseErasinge Margins.
ting On Various Kinds Of Paper P.42 Printing On Variousds Of Paper.
cting A Mode To Match Your Orig-
P.45 Selecting A Mode Totch Your Original.
ing Ink P.48 Economy ModeSav-Ink.
ing Master And Prints At Oneke P.49 Auto CycleMakingster And Prints At One Stroke.
ing Variable Numbers Of Printsm The Same Original Using Allred Data P.51 All Class ModeMak-Variable Numbers Of Prints From
vvvv Making Variable Numbers Of PrintsFrom The Same Original Using StoredDataSee P.53 Auto Class ModeMaking Variable Numbers Of PrintsFrom The Same Original UsingStored Data.
vvvv Making Variable Numbers Of PrintsFrom The Same OriginalSee P.56 Manual Class ModeWith One OriginalMaking Vari-able Numbers Of Prints From TheSame Original.
GRDIRE0E
GRERAS0E
A B A B
GRCLAS2E
GRCLAS2E
GRCLAS2E
-
xvvvv Making Variable Numbers Of PrintsFrom Different OriginalsSee P.58 Manual Class ModeWith 2 Or More OriginalsMakingVariable Numbers Of Prints FromDiff
vvvv MakFroSeeFixesam
vvvv ComSeeComPrin
vvvv Having Images Repeated On OnePrintSee P.68 Auto Combine ModeHaving Images Repeated On OnePrint.
A
Rerent Originals.
ing Fixed Numbers Of Printsm The Same Original P.61 Class ModeMakingd Numbers Of Prints From Thee Original.
bining Originals Into One Print P.63 Combine Originalsbining Originals Into Onet.
vvvv Skip Feed PrintingSee P.70 Skip Feed Printing.
vvvv Storing Your Print Settings In MemorySee P.72 ProgramStoring YourPrint Settings In Memory.
vvvv Printing Secret DocumentsSee P.75 Security ModePrint-ing Secret Documents.
vvvv Regaining The Image Density WhenThe Ink On The Drum DriesSee P.76 Quality Start ModeRegaining The Image Density WhenThe Ink On The Drum Dries.
vvvv Separating Printing Sets On The Pa-per Delivery TraySee P.77 Job SeparationSepa-rating Printing Sets On The PaperDelivery Tray.
vvvv Saving MasterSee P.79 Saving Master.
DC
B
GRCLAS1E
A B
C D
GRCLAS0E
R R R
R R R
GRCOMB2E
2 2
2
1 1
1 112
2GRACOM0E
1 1 1
1 11
11
GRJOBS0E
-
vvvv On Line PrintingSee P.80 On Line Printing.
vvvv Making Color PrintsSee P.87 Making Color Prints.
vvvv PrinSeeors
vvvv RotSeeing
vvvv MakSee
vvvv MerSeeMer
vvvv Having The Date Stamped On YourPrintsSee P.115 Stamping DateHav-ing The Date Stamped On YourPrints.xi
ting In Two Colors P.88 Printing In Two Col-.
ating The Original Images P.91 Image RotationRotat-Original Images.
e-up Printing P.105 Make-up Printing.
ging Images P.113 Image Overlayging Images.
vvvv Having Page Numbers Stamped OnYour PrintsSee P.117 Page StampingHav-ing Page Numbers Stamped On YourPrints.
vvvv Printing Preset Messages On YourPrintsSee P.120 Stamping FunctionPrinting Preset Messages On YourPrints.
GRCOLO0E
RP
RP
GROVER0E
ABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDE
ABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDEABCDE ABCDE ABCDE ABCDE ABCDE
GROVER1E
R R R
GRDATE0E
'98.7.25
GRPAGE0E
1
1 5
GRSTAM0E
R RPriority
Preliminary
Confidential
-
xii
vvvv Printing Your Own Messages On YourPrintsSee P.122 User StampingPrinting Your Own Messages OnYour Prints.
vvvv ComWithSeeComWitbining Originals Into One Print The Memory Board
P.124 Memory Combinebining Originals Into One Print
h The Memory Board.
GRUSTA0E
R
GRMCOM0E
43
1 22 3
14
GRREPE0E
-
TABLE OF CONTENTSMachine Exterior........................................................................................ 1Machine Interior......................................................................................... 2OptioOpera
KeyIndi
PanelDisp
1.OP
PrintiOriginPrepa
LoaSett
User StandLoadi
RepCha
ClosinAdjusAdjus
BefoAfte
Tint MChanStopp
Whe A DWhe The
PreseAuto ReprZoomDirecti
Entexiii
ns....................................................................................................... 4tion Panel ......................................................................................... 6
s .............................................................................................................. 6cators....................................................................................................... 8 Display ............................................................................................. 9lay Panel Layout .................................................................................. 10
ERATION
ng Paper.......................................................................................... 11als................................................................................................... 13ration For Printing ......................................................................... 15ding Paper............................................................................................. 15ing Up The Paper Delivery Tray ........................................................... 16Codes............................................................................................... 19ard Printing .................................................................................... 20ng Paper On The Paper Feed Tray ............................................... 22lenishing Paper..................................................................................... 22nging The Paper Size ........................................................................... 23g The Paper Feed And Paper Delivery Trays............................. 24ting Print Image Position .............................................................. 25ting Print Image Density ............................................................... 26re Making A Master.............................................................................. 26
r Making A Master................................................................................. 26odeHalftone Printing................................................................. 27
ging The Printing Speed ................................................................ 28ing The Machine During A Multi-print Run ................................. 29n You Want To Stop The Machine During A Multi-print Run And Printifferent Original..................................................................................... 29n You Want To Change The Number Of Prints Entered Or Check Completed Prints ................................................................................ 29t Reduce/EnlargeReducing And Enlarging Using Preset Ratios.. 30Magnification SelectionHaving The Machine Choose Theoduction Ratios .............................................................................. 32Reducing And Enlarging In 1 % Steps..................................... 35onal MagnificationStretching And Squeezing The Image In 1 % Steps .. 37ring The Reproduction Ratios .............................................................. 37
-
xiv
Entering The Dimensions Of The Original And Print Paper ........................ 38Edge EraseErasing Edge Margins...................................................... 40Printing On Various Kinds Of Paper...................................................... 42
Printing On Thick Paper .............................................................................. 42PrinPrinPrin
SelecPhoLettPen
EconoAuto All Cl SameAuto SameManu Of PrManu NumClass CombAuto Skip FProgr
StorRecProtRem
SecurQuali On T
UsinJob S TraySavinOn Liting On Thin Paper................................................................................ 42ting On Envelopes ................................................................................ 43ting On Special Kinds Of Paper ............................................................ 43ting A Mode To Match Your Original ............................................ 45to Mode Printing.................................................................................... 45er/Photo Mode Printing ......................................................................... 46cil Mode Printing ................................................................................... 47my ModeSaving Ink .................................................................. 48
CycleMaking Master And Prints At One Stroke....................... 49ass ModeMaking Variable Numbers Of Prints From The Original Using All Stored Data.................................................... 51
Class Mode Making Variable Numbers Of Prints From The Original Using Stored Data ......................................................... 53
al Class Mode With One OriginalMaking Variable Numbersints From The Same Original........................................................ 56al Class Mode With 2 Or More OriginalsMaking Variablebers Of Prints From Different Originals ....................................... 58ModeMaking Fixed Numbers Of Prints From The same Original ..... 61ine OriginalsCombining Originals Into One Print................... 63Combine ModeHaving Images Repeated On One Print .......... 68eed Printing................................................................................... 70
amStoring Your Print Settings In Memory............................... 72ing Your Settings .................................................................................. 72alling A Program ................................................................................... 73ecting A Program.................................................................................. 73oving Program Protection .................................................................... 74ity ModePrinting Secret Documents ........................................ 75
ty Start Mode Regaining The Image Density When The Inkhe Drum Dries................................................................................. 76g Quality Start Manually....................................................................... 76eparationSeparating Printing Sets On The Paper Delivery.......................................................................................................... 77g Master .......................................................................................... 79ne Printing....................................................................................... 80
-
2.OPTIONAL FUNCTIONS
Printing Using The Optional Document Feeder.................................... 81Originals ...................................................................................................... 81Setting Originals In The Document Feeder................................................. 82ComMan
ColorMakChaPrin
ChanPrinMas
ImageMake
MaiMakMakBac
MakinComHowCom
MakeMakeMakeImageStampPage StampUser Memo Mem
Com 1 ORep
3.US
AccesUser
1. Sxv
bine Originals Printing With The Document Feeder ............................ 83ual Class Mode With 2 Or More Originals Using The Document Feeder.... 84 Printing Using The Optional Color Drum.................................... 87ing Color Prints..................................................................................... 87nging The Color Drum Unit ................................................................... 87ting In Two Colors................................................................................. 88ging The Drum Size........................................................................ 90ting Area (at 23C/73F, 65 % RH) ....................................................... 90ter Cut Length....................................................................................... 90 RotationRotating Original Images .......................................... 91
-up Printing Features ..................................................................... 93n Features ............................................................................................. 93e-up Modes For Designated Areas ...................................................... 93e-up Modes For Outside Designated Areas ......................................... 94kground Patterns................................................................................... 96g A Command Sheet For Make-Up Printing................................ 98mand sheet.......................................................................................... 98 To Make A Command Sheet............................................................... 99mand Sheets And Finished Prints ..................................................... 104
-up Printing ................................................................................... 105-up Printing With The Optional Document Feeder .................... 107-up Samples .................................................................................. 110 OverlayMerging Images......................................................... 113ing DateHaving The Date Stamped On Your Prints ............. 115
StampingHaving Page Numbers Stamped On Your Prints .. 117ing FunctionPrinting Preset Messages On Your Prints ...... 120
StampingPrinting Your Own Messages On Your Prints ....... 122ry CombineCombining Originals Into One Print With The
ory Board ...................................................................................... 124bine 4, 8, or 16 Originals 4, 8, or 16 One-sided Originals ne-sided Print Of 4, 8, or 16 Images .................................................. 125eatRepeating An Image Over The Entire Print ............................... 129
ER TOOLS
sing The User Tools.................................................................... 133Tools Menu.................................................................................... 135ystem .................................................................................................. 135
-
xvi
2. Set Operation Modes ............................................................................ 1363. Initial Setting.......................................................................................... 1374. Mode Setting ......................................................................................... 1395. Stamp.................................................................................................... 1446. Set User Code (s) ................................................................................. 146
User 1-8 3-4 3-5 3-9 4-114-144-195-4 5-7 5-8 5-115-145-156-1 6-2 6-4 6-5
4.Wh
If YouIf You
Comx Cle
x x x x x x x x x +
WhenWhenWhenWhenWhenWhenTool Menus In Detail..................................................................... 148Time Setting........................................................................................ 148Reproduction Ratio ............................................................................. 148Class Enter No.................................................................................... 149Margin Erase Area .............................................................................. 150 No. of Skip Feed ............................................................................... 151 No. of Q.start..................................................................................... 152 Type of Paper ................................................................................... 154Stamp Position.................................................................................... 154Position (User) .................................................................................... 156Regist. (User)...................................................................................... 158 Position (Date) .................................................................................. 158 Position (Page) ................................................................................. 160 Make/Chg. Pattern ............................................................................ 161Check Counter .................................................................................... 162Reset Counters ................................................................................... 163Chg. User Code .................................................................................. 163Del. User Code ................................................................................... 164
at To Do If Something Goes Wrong
r Machine Does Not Operate As You Want ............................... 165 Cannot Make Prints As You Want............................................. 167bine Originals Mode........................................................................... 167aring Misfeeds............................................................................. 168
+ A Paper Misfeed In The Paper Feed Section ................................. 168+ A + B Paper Misfeed In The Paper Feed Section........................... 169+ B Paper Or Master Wrapped Around The Drum............................. 170+ C Paper Misfeed In The Paper Exit Section ................................... 172+ D Master Misfeed In The Master Feed Section .............................. 173+ D + B Master Misfeed In The Master Feed Section........................ 173+ B + E Master Misfeed in The Master Eject Section ........................ 174+ E Master Misfeed In The Master Eject Section............................... 175 P Original Misfeed Occurs When Using The Optional Document Feeder.... 175 The Open Cover/Unit Indicator (M) Lights............................... 177 The Add Ink Indicator (j) Lights.............................................. 178 The Master End Indicator (C) Lights........................................ 180 The Master Eject Indicator (k) Lights...................................... 182 Other Indicators Are Lit.............................................................. 183 The Prints Are Not Delivered In A Neat Stack.......................... 184
-
Poor Printing.......................................................................................... 185Dirty Background....................................................................................... 185Black Line/Stain ........................................................................................ 188Skipped Prints ........................................................................................... 188
5.RE
OperaGenPrinOrigMisfPC
WherEnvPowAcc
MaintMaiOpt
Comb
6.SP
Main DocuConsINDEXxvii
MARKS
tion Notes..................................................................................... 189eral Cautions ...................................................................................... 189t Paper ................................................................................................ 191inals .................................................................................................... 191ed Paper ............................................................................................. 191Controller............................................................................................. 192e To Put Your Machine................................................................. 193ironmental Conditions ......................................................................... 193er connection...................................................................................... 194
ess to machine .................................................................................... 194aining Your Machine.................................................................... 196n Frame ............................................................................................... 196ional Document Feeder ....................................................................... 197ination Chart ................................................................................ 198
ECIFICATIONS
Frame............................................................................................. 201ment Feeder .................................................................................. 205umables......................................................................................... 206...................................................................................................... 207
-
xviiiThis page is intentionally blank.
-
Machine Exterior
1. FroOpen fchine.
2. FlipOpen and so
3. OpOperatcated h
4. MaOpen ting the
5. PapPress t
6. PapUse to
7. PapSet pap
8. PapUse to
1
21
nt Dooror access to the inside of the ma-
-up Coverto access the {Image Density} key on. See P.6 Operation Panel.
eration Panelor controls and indicators are lo-ere. See P.6 Operation Panel.
ster Feed Unithe master feed unit when install- master.
er Feed Tray Down keyo lower the paper feed tray.
er Feed Side/End Platesprevent paper skew.
er Feed Trayer on this tray for printing.
er Feed Side/End Plate Knobmove the side/end plates.
TPEH162E
4
5
6
7
8
3
-
2Machine Interior
1. MaUse to
2. PapUse towings.
3. PapLift or paper t
1
6
5
4
3
2
1in Switchturn the power on or off.
er Alignment Wing Knobs lift or lower the paper alignment
er Alignment Wingslower the wings depending on theype you use.
4. Paper Delivery End PlateThis plate aligns the leading edge ofprints.
5. Paper Delivery End Plate KnobUse to move the end plate.
6. Paper Delivery TrayCompleted prints are delivered here.
5
TPEH260E
14
13
12
11
10
987
-
7. Paper Delivery Side PlatesThese plates align the prints on the paperdelivery tray.
8. Paper Delivery Side Plate KnobsUse to
9. MaE1Use to
10. InSet the
11. DLowerunit.
12. DThe ma
13. ExPositioprintin
14. PlLowerprintin
15. TrSwing 81/2" 3
move the side plates.
ster Eject Unit Front Handle
pull out the master eject unit.
k Holder ink cartridge in this holder.
rum Unit Lock Lever B1 to unlock and pull out the drum
rum Unitster is wrapped around this unit.
posure Glass (Contact Glass)n originals here face down forg.
aten Cover this cover over an original beforeg.
ailing Edge Guidesout these guides when you use A4, 11"K or B5L paper.
-
4Options
1. Do
Notr Oth
C C K C M Pcument Feeder
eer options:olor Drums: A3, 11" 17" drum (red, blue, green, and brown)olor Drums: A4, 81/2" 11" drum (black, red, blue, green, and brown)ey Counterabinetemory Board
C Controller
TPEH163E
1
-
5This page is intentionally blank.
-
6Operation Panel
Keys
1. {{{{Qu See ing TheDrum D
2. {{{{SeSee cret Do
3. {{{{SkPress tP.70 S
4. {{{{UsPress tconditi
5. {{{{Sta Press tion. Sing TheP.117 bers StStampsages OStampiOn You
6. {{{{MaPress ttion. Se
7. {{{{OvPress tmode. Mergin
Clear Mo
r S
23
22ality Start}}}} key P.76 Quality Start Mode Regain- Image Density When The Ink On The
ries.
curity}}}} keyP.75 Security ModePrinting Se-cuments.
ip Feed}}}} keyo select skip feed printing. See kip Feed Printing.
er Tools}}}} keyo change the default settings andons to meet your requirements.
mp}}}} keyto select the optional Stamp func-ee P.115 Stamping DateHav- Date Stamped On Your Prints, Page StampingHaving Page Num-amped On Your Prints, P.120ing FunctionPrinting Preset Mes-n Your Prints, P.122 User
ngPrinting Your Own Messagesr Prints.
ke-Up}}}} keyo use the optional Make-up func-e P.105 Make-up Printing.
erlay}}}} keyo select optional Image OverlaySee P.113 Image Overlay
g Images.
8. {{{{Edge Erase}}}} key Press to print originals that have an un-necessary image on the edges. See P.40Edge EraseErasing Edge Margins.
9. {{{{Image Density}}}} key Press to make prints darker or lighter.See P.26 Adjusting Print Image Densi-ty.
10. {{{{Tint}}}} keyPress to reproduce tinted images. See P.27 Tint ModeHalftone Printing.
11. {{{{Economy Mode}}}} keyPress to save ink. See P.48 EconomyModeSaving Ink.
12. {{{{On Line}}}}keySee P.80 On Line Printing.
13. {{{{Job Separator}}}} key See P.77 Job SeparationSeparatingPrinting Sets On The Paper Delivery Tray.
14. {{{{Combine}}}} keyPress to combine originals onto 1 print.See P.63 Combine OriginalsCombin-ing Originals Into One Print, P.124Memory CombineCombining OriginalsInto One Print With The Memory Board, P.68 Auto Combine ModeHaving ImagesRepeated On One Print.
User Tools
Stamp
Make-Up
Overlay
Edge EraseSkip Feed Economy Mode
Tint
Combine Class Slow FastSpeed
Darker 2
Darker 1Normal
On Line
Job Separator
LighterImage Density
17 8 /Drum
Color1 2Program
Ente
Clear/Stop1
1
2
3
7 8 11 13 14 15 16 17 20 21
191812109645
-
15. {{{{CPress ManuaAll Cbers Ofing AllModePrints Stored With Obers OfP.58 MOriginaPrints Class Prints F
16. {{{{Press tP.26 AP.28 C
17. {{{{Press tward, rPrint ImThey ation yo
18. {{{{PPress tSee Setting
Fasteed
7 8 /rum
Color1 2Program
Clear/Stop
6 17
187
lass}}}} keyto select All Class, Auto Class,l Class, or Class mode. See P.51lass ModeMaking Variable Num- Prints From The Same Original Us- Stored Data, P.53 Auto Class Making Variable Numbers OfFrom The Same Original Using
Data, P.56 Manual Class Modene OriginalMaking Variable Num- Prints From The Same Original,
anual Class Mode With 2 Or MorelsMaking Variable Numbers OfFrom Different Originals, P.61ModeMaking Fixed Numbers Ofrom The same Original.
Speed}}}} keyso adjust the printing speed. See
djusting Print Image Density, hanging The Printing Speed.
~~~~}}}} {{{{}}}}}}}}{{{{||||}}}}{{{{{{{{}}}} keyso shift the image forward, back-ight, or left. See P.25 Adjustingage Position.
re also used to highlight the sec-u wish to select.
rogram}}}} keyo input or recall user programs.P.72 ProgramStoring Your Prints In Memory.
19. Number keysPress to enter the desired number ofprints and data for selected modes.
20. {{{{Clear/Stop}}}} keyWhile printing, press to stop the machineoperation.
21. {{{{Enter}}}} keyUse to enter data in selected modes.
22. {{{{Clear Modes}}}} keyPress to clear the previously entered jobsettings.
23. {{{{Start}}}} keyPress to make a master.
24. {{{{Auto Cycle}}}} keyUse to process the master and makeprints at one stroke. See P.49 Auto Cy-cleMaking Master And Prints At OneStroke.
25. {{{{Proof}}}} keyPress to make proof prints.
26. {{{{Print}}}} keyPress to start printing.
Clear Modes
Auto Cycle
Proof
Print
Enter Start
20 21 23
26
25
242219
TPES011N
-
8Indicators
1. SpeThis inunder
2. MoThe mdard cchine. Not Op
3. A3/This indrum Chang
4. A4/This in11" drChang
5. ColThis inunit is ing Usi
Econ
Tin
Dar
DarNor
LigImage
1 2 3 4 5 6cial Feature indicatordicator is lit when you press keysthe flip-up cover.
nitorsonitors light up when a non-stan-ondition occurs within the ma-See P.165 If Your Machine Doeserate As You Want.
11" 17" Drum indicatordicator is lit when the A3, 11" 17"unit is installed. See P.90ing The Drum Size.
81/2" 11" Drum indicatordicator is lit when the A4, 81/2" um unit is installed. See P.90ing The Drum Size.
or Drum indicatordicator is lit when the color druminstalled. See P.87 Color Print-ng The Optional Color Drum.
6. CounterDisplays the number of prints entered.While printing, it shows the number ofprints remaining.
7. Panel DisplaySee P.9 Panel Display.
TPES012N
omy Mode
t
Combine Class Slow FastSpeed
ker 2
ker 1mal
On Line
Job Separator
hterDensity
17 8 /Drum
Color1 2
1
7
-
Panel Display
The panel display shows operational status, error messages, and functionmenus.
1. Theed fun
2. Theon thePress a To m
the
Impr Do
the
Notr Wh
ex.r Com
1
2
[OK][Cance
[Prev.]
{~} {
[Selec[Exit]9
function items for the select-ction are displayed.
se keys correspond to the item display. relevant key to select a function.
ove the selection to the left, press[] key.
To move the selection to the right,press the [] key.
3. Displays operational status ormessages.
4. Displays items which can be se-lected or specified.
ortantnot apply a strong shock or force of about 30 N (about 3 kgf) or more to panel display. Otherwise, the display might be damaged.
een you select or specify an item on the panel display, it is highlighted,
. Keys appearing as a cannot be used.mon keys:
3
4
TPES658N
Sets a selected function or entered value.
l] Cancels a selected function or entered value and returns to the previous display.
[Next] When there are too many items to fit on the display, use these keys to move between pages.
}}{|}{{}[][] Press to highlight the selection you wish to select. t] Sets a slected value.
Turns off the message panel display and returns to the previous display.
Auto OK
-
10
Display Panel LayoutThe basic elements used on the display are shown below. Understanding theirmeaning helps you exploit this machine's features quickly and easily.
vvvv Sam
1. Op2. Ava3. If ywhitekey.
kPre
1. Ava2. Canto the
3. Con
2
1
3
1ple Display for Selecting the [Original] key
erational status or message.
ilable functions.
ou see a picture with a keyned out, it means Press this
ss the [Original] key.
ilable functions.
cels the settings and returns previous display.
firms the settings.
TPES655N
TPES510E
2 3
-
1. OPERATION
Prin
The fo Pap Pap Pap Pap Rou Pap Env Fol Tor Slip Rou Pap Sho Thi The
If youYou cayou wmode Me IncWhenspeed11ting Paper
llowing types of print paper are not recommended for this machine.er smaller than 70 mm 148 mm, 2.8" 5.9"er larger than 297 mm 432 mm, 11.6" 17.0"er heavier than 209.3 g/m2, 55.6 lber lighter than 47.1 g/m2, 12.6 lbghly-cut paperer of different thickness in the same stackelopes heavier than 85 g/m2, 22 lb.
ded, curled, creased, or damaged papern paperpery papergh paperer with any kind of coating (such as carbon)rt grain papern paper that has low stiffness following types of envelopes
make a print on rough grain paper, the copy image might be blurred.n use A3 (297 420 mm) or 11" 17" originals or printing paper. Whenant to print the entire image of an A3, 11" 17" original, select Reducebecause the maximum print areas are as follows:tric version: 290 409 mm, 11.4" 16.1"h version: 290 419 mm, 11.4" 16.4" you use A3, 11" 17" and 209.3 g/m2, 55.6 lb paper, slow the printing down to setting 1, 2, or 3.
-
OPERATION
12
1
Importantr Correct curls in the paper before setting it in the machine. When you cannot
corcur
Do noStore oStore punpacOnly urect the paper curl, stack the paper with the curl face down. If paper isled, it might wrap around the drum or stains might appear.t store paper where it will be exposed to heat or direct sunlight.n a flat surface.aper where it will not curl or absorb moisture. Use paper soon after it is
ked.se paper where the leading edge has two right angle corners.
-
Originals
Originals
The fotected
Underthis caEdge Wh Wh Wh Wh WhIf younals, tThe m304.8 If youyou mwith tspeedSet thethis prto be pBasica
Whendirectiimage
Metric
Inch v13
1llowing original sizes set on the exposure glass (contact glass) can be de-.
the following conditions, the machine might not detect the original. Inse, select the original image area with the {Edge Erase} key. See P.40EraseErasing Edge Margins.en you use originals with index tabs.en you use OHP transparencies or translucent originals.en you use dark originals.en you use originals with solid images.en you use originals other than the sizes described above. do not lift the platen cover more than 30 cm, 12" when you replace origi-he machine might not detect the original.aximum original size you can set on the exposure glass (contact glass) is 432 mm, 12" 17".
use originals that have bold letters or solid images at the leading edges,ight get prints with dirty edges. In this case, set the original face downhe widest margin toward the paper delivery tray or raise the printing. original after correction fluid and ink have completely dried. Not takingecaution could mark the exposure glass (contact glass) and cause marksrinted.lly, set originals as shown below.
you have an optional memory board and the original is set in a differenton from the print paper, the machine automatically rotates the original by 90 to match the print paper direction.
version A3L, B4L, A4KL, B5KL
ersion 11" 17"L, 81/2" 14"L, 81/2" 11"KL
RR R
R
GRSETT0E
-
OPERATION
14
1
The first 10 mm, 0.4", of the leading edge and the last 2 mm, 0.08, of the trailingedge cannot be printed. Make sure the leading edge margin is at least 10 mm,0.4", a
a = 10
Originnd the trailing edge margin is at least 2 mm, 0.08.
mm, 0.4"
al Print
a
-
Preparation For Printing
Preparation For Printing
Load
A Cartray
B Lift
C Graandma15
1ing Paperefully open the paper feed.
the feed side/end plates.
sp the side/end plate knob adjust the side/end plates to
tch the paper size.
D Place the paper on the paper feedtray.
Noter Correct the paper curl before
setting the paper. If you cannotdo so, stack the paper with thecurl face down.
EMake sure that the paper feedside/end plates make contact withthe paper lightly.
Noter Make sure that the paper size
and direction in the panel dis-play correspond with the actualpaper size and direction set onthe paper feed tray.
TPEY998E
TPEY999E
TPEY030E
TPEY040E
TPEY090E
TPEY050E
-
OPERATION
16
1
Setting Up The Paper Delivery Tray
A Gramoto m
Whor s
A Ate
Whor l
A Pu
B At
posite side of the operationpanel.sp the end plate knob andve the paper delivery end plate
atch the print paper size.
en you use A4, 81/2" 11"L maller paper
djust the end plate to matchhe paper size scale on the op-ration panel side.
en you use B4, 81/2" 14"L arger paper
ull out the paper delivery trayntil it stops.
djust the end plate to matchhe paper size scale on the op-
B Grasp the side plate knobs andmove the paper delivery sideplates to match the print papersize.
Noter The inside of the side plates
should match the paper size.
When you use thick paper (157 g/m2 to 209.3 g/m2, 42 lb to 55.6 lb)A Adjust the side plates to match
the paper size scale on themain frame side.
When you use standard paper (47 g/m2 to 128 g/m2, 12.5 lb to 34 lb)A Adjust the side plates to match
the paper size scale on the endplate side.
TPEH030N
TPEH040E
TPEH040N
TPEH150E
-
Preparation For Printing
C Lower or lift the paper alignmentwings by turning the left andrigh
Nr W
musy
r Lw
Whor t
A Lw
Whor tpap
A Lw
Whor tlarg
A Lw
DWhen you use A4, 81/2" 11"KKKK, orB5LLLL paper, swing out the trailing17
1t knobs.
otehen the guides are up, youight not be able to load the
nit to full capacity (1,000heets) depending on the paperou are using.ift the paper alignment wingshen B5L prints are curled.
en you use 81.4 g/m2, 21.6 lb hicker paper
ower the paper alignmentings.
en you use 81.4 g/m2, 21.6 lb hinner and B5 or smaller er
ower the paper alignmentings.
en you use 81.4 g/m2, 21.6 lb hinner and A4, 81/2 11" or er paper
ift the paper alignmentings.
edge guides.
When you use A4, 8 1/2" 11"Kpaper
A Swing out the guides as shownin the illustration.
When you use B5L paper
A Swing out the guides as shownin the illustration.
TPEH141E TPEH310E
GRTRAI0E
GRTRAI1E
-
OPERATION
18
1
E Turn on the main switch.
Nr Y
paSLtoteou can have the machine dis-lay how much ink and masterre left when you switch it on.ee User ToolsInk/Mastereft in P.139 4. Mode Set-
ing.
TPEH021E
-
User Codes
User Codes
PreYoumowitter Use P
If the Code their ucan becount underCode6. Set
Notr Wh
codyouturnaut
A Inpwit
Nr U
tr T
pe19
1paration have to turn on User Code
de and register your user codeh the user tools. You can regis-up to 20 user codes. See Setr Code, Reg. User Code, in.146 6. Set User Code (s).
machine is set to use the Userfunction, operators must inputser codes before the machine operated. The machine keepsof the number of copies made each user code. See Set User, Reg. User Code, in P.146 User Code (s).
een the machine is set for useres, the machine will prompt for your user codes when you the main switch on or when
o reset comes into effect.
ut your user code (4 digits)h the Number keys.
oteser codes are not displayed on
he panel display.o change the number entered,ress the {Clear/Stop} key andnter the new number.
B Press the {{{{Enter}}}} key.
CMake your prints.
D To prevent others from makingprints with your user code, holdthe {{{{Clear Modes}}}} key, then pressthe {{{{Clear/Stop}}}} key.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES020N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES030N
-
OPERATION
20
1
Standard Printing
A Lift
Nr B
m
B SetexpThethe
C Low
D Sel[Pp
RSK the platen cover.
otee sure to lift the platen coverore than 30 cm, 12".
the original face down on theosure glass (contact glass). original should be aligned to
rear left corner.
er the platen cover.
ect the paper type with ther. Type] key.
eferenceee P.42 Printing On Variousinds Of Paper.
E Enter the number of prints re-quired with the Number keys.
Noter Up to 9999 prints can be entered
at one time.r To change the number entered,
press the {Clear/Stop} key andenter the new number.
F Press the {{{{Start}}}} key.
A trial print is delivered to the pa-per delivery tray.
TPEH010E
TPEH270E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
-
Standard Printing
G Press the {{{{Proof}}}} key and checkthe image density and the imagepos
Nr I
r=P
r IddSa
H Pre
Nr A
sm
r TmS
I Open the paper delivery sideplate of the operation panel side.21
1ition of the proof print.
otef the image position is not cor-ect, adjust it using the [Image
] key. See P.25 Adjustingrint Image Position.
f the image density is slightlyark or light, adjust the imageensity using the {Speed} keys.ee P.26 Adjusting Print Im-ge Density.
ss the {{{{Print}}}} key.
otefter printing is completed, the
ame number of prints is auto-atically set for the next job.
o stop the machine during aulti-print run, press the {Clear/
top} key.
Noter You cannot open the side plate
on the opposite side.
J Remove the prints from the paperdelivery tray.
Noter To return the machine to the ini-
tial condition after printing,press the {Clear Modes} key.
K Close the paper delivery sideplate.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES060N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES070N
TPEH050E
TPEH060E
-
OPERATION
22
1
Loading Paper On The Paper Feed Tray
The Lwhen paper.
Reple
A Pre
Nr T
yr
B Prekey
Nr T
ww
r Ttcoad Paper indicator (B) lightsthe paper feed tray runs out of
nishing Paperss the {{{{Clear/Stop}}}} key.
otehis step is necessary only ifou want to pause a print run toeplenish paper.
ss the Paper Feed Tray Down.
otehe paper feed tray will lowerithout the key being pressedhen printing paper runs out.he top sheet might remain be-
ween the feed rollers. In thisase, remove the top sheet.
C Load paper on the paper feed tray.
Noter If you wish to set a different
kind of paper, select the appro-priate paper type with the [Ppr.Type] key. See P.42 PrintingOn Various Kinds Of Paper.
r Release the pads of the feedside/end plates before loadingpaper. Reset the pads after pa-per is set.
r Correct paper curl before set-ting the paper.
D Press the {{{{Print}}}} key to resumeprinting.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES080N
TPEH130E
TPEY040E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES070N
-
Loading Paper On The Paper Feed Tray
Changing The Paper SizeA Rem
fee
The
B Graandendsize
C Platray
Nr C
s
r Make sure that the side/endplates touch the paper lightly.23
1ove the paper from the paper
d tray.
paper feed tray will lower.
sp the side/end plate knob adjust the paper feed side/ plates to match the paper.
ce the paper on the paper feed.
oteorrect any paper curl before
etting the paper.
r Make sure that the paper sizeand direction in the panel dis-play correspond with the actualpaper size and direction set onthe paper feed tray.
r If you set a different kind of pa-per, do not forget to select theappropriate paper type with the[Ppr. Type] key. See P.42Printing On Various Kinds OfPaper.
D Adjust the paper delivery sideplates and if necessary, pull out orin the paper delivery tray and ad-just the end plate. See P.16Setting Up The Paper DeliveryTray.
TPEY997E
TPEY030E
TPEY040E
-
OPERATION
24
1
Closing The Paper Feed And Paper Del
A Remfee
The
B Tur
C Admatheivery Trays
ove the paper from the paperd tray.
paper feed tray will lower.
n off the main switch.
just the side/end plates totch A4LLLL paper and lowerm.
D Close the paper feed tray.
E Push in the paper delivery tray, ifnecessary.
TPEY997E
TPEH020E
TPEY021E
TPEY011E
TPEH041E
-
Adjusting Print Image Position
Adjusting Print Image Position
You ction to
*Pap
A Pre
Nr Y
tp{
B Ad{{{{~~~~}}}}
owSpee25
1an adjust the print image posi- suit your needs.
er feed direction
ss the [Image ====] key.
oteou can skip step A and adjust
he image position directly byressing the {~}, {}}, {|}, and{} keys.
just image position using the, {{{{}}}}}}}}, {{{{||||}}}}, and {{{{{{{{}}}} keys.
Noter When you shift the image for-
wards, leave a 10 mm, 0.4" mar-gin at the leading edge. If thereis no margin, paper might wraparound the drum and cause amisfeed.
r The {~} and {}} keys shift theimage up to 15 mm, 0.6" eachway and the image is shiftedabout 0.5 mm, 0.02" each timethey are pressed.
r The {|} and {{} keys shift theimage up to 10 mm, 0.4" eachway and the image is shiftedabout 0.5 mm, 0.02" each timethey are pressed.
C Press the [OK] key.D Press the {{{{Proof}}}} key to check the
image position.
GRPOSI0E
TPES560E
Fastd
Clear/S
TPES090N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES060N
-
OPERATION
26
1
Adjusting Print Image Density
You caty to sways t
vvvv BefUse
vvvv AfteUse
Befor
A Prejus
B Pren adjust the print image densi-uit your needs. There are twoo do this:
ore Making A Master the {Image Density} key.
r Making A Master the {Speed} keys.
e Making A Masterss the {{{{Image Density}}}} key to ad-t the image density.
ss the {{{{Start}}}} key.
After Making A MasterA To increase the image density,
press the {{{{WWWW}}}} key. To reduce theimage density, press the {{{{VVVV}}}} key.
Noter The faster the printing speed be-
comes, the lighter the printingdensity is. If you want darkerprints, decrease the printingspeed.
Stamp
Make-Up
Overlay
Edge EraseSkip Feed Economy Mode
Tint
Darker 2
Darker 1Normal
On Line
Job Separator
LighterImage Density
TPES340N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
Combine Class Slow FastSpeed
1
TPES100N
-
Tint ModeHalftone Printing
Tint ModeHalftone Printing
Use thes.
A Pre
B Pre27
1is function to print tinted imag-
ss the {{{{Tint}}}} key.
ss the {{{{Start}}}} key.
GRTINT0E
Stamp
Make-Up
Overlay
Edge EraseSkip Feed Economy Mode
Tint
Darker 2
Darker 1Normal
On Line
Job Separator
LighterImage Density
TPES110N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
-
OPERATION
28
1
Changing The Printing Speed
Use thprintintweenty depuse.
A Prespeduc
Nr T
a
r Tr T
cd
r WliIs
Co
1e {Speed} keys to adjust theg speed. The relationship be-
printing speed and print quali-ends on the type of paper you
ss the {{{{VVVV}}}} key to increase theed and press the {{{{WWWW}}}} key to re-e the speed.
otehe following speeds are avail-ble:
Setting 1:60 sheets/minuteSetting 2:75 sheets/minuteSetting 3:90 sheets/minuteSetting 4:105 sheets/minuteSetting 5:120 sheets/minute
he default is 90 sheets/minute.he faster the printing speed be-omes, the lighter the printingensity is, and vice versa.hen the machine is used in
ow temperature conditions, themage density might decrease.n this case, slow the printingpeed down to setting 1 or 2.
mbine Class Slow FastSpeed
TPES100N
-
Stopping The Machine During A Multi-print Run
Stopping The Machine During A Multi-print Run
WhenMachRun AOrigiA Pre
B Set
C Entpre29
1 You Want To Stop The ine During A Multi-print nd Print A Different
nal
ss the {{{{Clear/Stop}}}} key.
the new original.
er the number of prints andss the {{{{Start}}}} key.
When You Want To Change The Number Of Prints Entered Or Check The Completed Prints
A Press the {{{{Clear/Stop}}}} key.
B Change the number of prints orcheck the completed prints.
Noter When you change the number
of prints, you can re-enter thenumber with the Number keysafter pressing the {Clear/Stop}key.
C Press the {{{{Print}}}} key.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES080N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES080N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES070N
-
OPERATION
30
1
Preset Reduce/EnlargeReducing And Enla
You caing.
Notr The
ageage
*Papa=10 mr You
(3 erati
r Youthepapthemarging Using Preset Ratios
n select a preset ratio for print-
e leading edge of the print im- does not shift when a print im- is made with this function.
er feed directionm, 0.4" can select one of 7 preset ratiosnlargement ratios, 4 reductionos). can select a ratio regardless of
size of an original or printinger. With some ratios, parts of
image might not be printed orrgins will appear on prints.
r You can change the fixed repro-duction ratio with the user tools.See Reproduction Ratio in P.148 3-4 Reproduction Ratio.
r Prints can be reduced or enlargedas follows:
vvvv Metric version
vvvv Inch version
GRRATI0E
a
GRRATI1E
Ratio (%) Original Print paper size
141 A4 A3, A5 A4, B5 B4, B6 B5
122 A4 B4, A5 B5
115 B4 A3, B5 A4, B6 A5
93
87 A3 B4, A4 B5
82 B4 A4, B5 A5
71 A3 A4, A4 A5, B4 B5
Ratio (%) Original Print paper size
155 5 1/2" 8 1/2" 8 1/2" 14"
129 8 1/2" 11" 11" 17", 5 1/
2" 8 1/2" 8 1/2" 11"
121 8 1/2" 14" 11" 17"
93
77 8 1/2" 14" 8 1/2" 11"
74 11" 15" 8 1/2" 11"
65 11" 17" 8 1/2" 11", 8 1/
2" 11" 5 1/2" 8 1/2"
-
Preset Reduce/EnlargeReducing And Enlarging Using Preset Ratios
A Press the [Ratio] key.
B Sel[]
C Pre
DMathesize
E Setglation
F Pre
G Chetria
Nr I
r
=] key (see P.25 AdjustingPrint Image Position).31
1
ect the desired ratio with the, [], {{{{~~~~}}}}, or {{{{}}}}}}}} key.
ss the [OK] key.ke sure that the original and print paper are the correct.
your original on the exposuress (contact glass) or in the op-al document feeder.
ss the {{{{Start}}}} key.
ck the image position of thel or proof print.
otef the image position is not cor-ect, adjust it using the [Image
HMake your prints.
TPES570E
TPES530E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
-
OPERATION
32
1
Auto Magnification SelectionHaving The Ma
The mand or
Notr You
origr You
origr The
prolow
vvvv M
*1 Wasn
Orign
Paper
A3L
B4L
A4L
A4K
B5L
B5K
A5L
B6Lchine Choose The Reproduction Ratios
achine can choose an appropriate reproduction ratio based on the paperiginal sizes you use.
e can change the reproduction ratio from 50 % to 200 % when you set aninal on the exposure glass (contact glass). can change the reproduction ratio from 50 % to 155 % when you set aninals in the optional document feeder. paper and the original sizes that can be used in this function and the re-duction ratio selected depending on the original and paper sizes are as fol-s:
etric version
hen your machine is equipped with the optional memory board, the machineutomatically rotates the original image by 90 to match the paper direction andelects the proper reproduction ratio. See P.91 Image RotationRotating Origi-al Images.
i-al
A3L B4L A4L A4K B5L B5K A5L *2 A5K *2
100 % 115 % 141 % -- 163 % -- -- --
87 % 100 % 122 % -- 141 % -- -- --
71 % 82 % 100 % 100 % *1 115 % 115 % *1 141 % 141 % *1
71 % *1 82 % *1 100 % *1 100 % 115 % *1 115 % 141 % *1 141 %
61 % 71 % 87 % 87 % *1 100 % 100 % *1 122 % 122 % *1
61 % *1 71 % *1 87 % *1 87 % 100 % *1 100 % 122 % *1 122 %
50 % 50 % 71 % 71 % *1 82 % 82 % *1 100 % 100 % *1
-- 50 % 61 % 61 % *1 71 % 71 % *1 87 % 87 % *1
GRAUTO0E
-
Auto Magnification SelectionHaving The Machine Choose The Reproduction Ratios
*2 Set these originals in the optional document feeder.
vvvv I
*1 Wasn
*2 Sr Dep
not
A Setdoc
B Pre
C Sel
D Pre
Or
Paper
11" 17
81/2"
81/2"
81/2"
81/2" L33
1
nch version
hen your machine is equipped with the optional memory board, the machineutomatically rotates the original image by 90 to match the paper direction andelects the proper reproduction ratio. See P.91 Image RotationRotating Origi-al Images.et these originals in the optional document feeder.ending on the original type you use, the proper reproduction ratio might
be selected. See P.13 Originals and P.81 Originals.
your original on the exposure glass (contact glass) or in the optionalument feeder.
ss the [Ratio] key.
ect [Auto] with the [] or {{{{}}}}}}}} key.
ss the [OK] key.
iginal 11" 17"L 81/2" 14"L 81/2" 11"L 81/2" 11"K 81/2" 51/2"L *2
81/2 51/2" K *2
"L 100 % 121 % 129 % -- 200 % --
14"L 77 % 100 % -- -- 155 % --
11"L 65 % 77 % 100 % 100 % *1 129 % 129 % *1
11"K 65 % *1 77 % *1 100 % *1 100 % 129 % *1 129 %
51/2" 50 % 61% 65 % 65 % *1 100 % 100 % *1
TPES570E
TPES570E
-
OPERATION
34
1
E Press the {{{{Start}}}} key.
F Che
Nr I
ck the image position of the trial or proof print.
otef the image position is not correct, adjust it using the [Image =] keys (See
P.25 Adjusting Print Image Position).
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
-
ZoomReducing And Enlarging In 1 % Steps
ZoomReducing And Enlarging In 1 % Step
You catio in 1
Notr You
ratiset glas
r Youratiset me
A Pre
Nr T
t[pt35
1s
n change the reproduction ra- % steps.
e can change the reproduction
o from 50 % to 200 % when youan original on the exposures (contact glass). can change the reproduction
o from 50 % to 155 % when youoriginals in the optional docu-nt feeder.
ss the [Ratio] key.
oteo select a custom ratio, select
he closest ratio with the [],], {~}, or {}} key. Thenress the {|} or {{} key and go
o step F.
B Select [Mag.] with the [] or {{{{}}}}}}}}key.
C Press the [OK] key.DMake sure that [Zoom] is selected.
E Press the [OK] key.F Enter the desired reproduction ra-
tio.
Noter To change the value entered,
press the {Clear/Stop} key andenter the new value.
Using the [], [], {~}, or {}} key
A Adjust the ratio with the [],[], {{{{~~~~}}}}, or {{{{}}}}}}}} key.
GRZOOM0E
TPES570E
TPES570E
TPES530E
-
OPERATION
36
1
Using the number keys
A Eb
B P
G Pre
HMathesize
I Setglation
J Pre
K Check the image position of thetrial or proof print.nter the ratio with the Num-er keys.
ress the {{{{Enter}}}} key.
ss the [OK] key.ke sure that the original and print paper are the correct.
your original on the exposuress (contact glass) or in the op-al document feeder.
ss the {{{{Start}}}} key.
Noter If the image position is not cor-
rect, adjust it using the [Image=] key (see P.25 AdjustingPrint Image Position).
LMake your prints.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES020N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
-
Directional MagnificationStretching And Squeezing The Image In 1 % Steps
Directional MagnificationStretching And Squ
Printsdifferetally aways t
vvvv EntAdual
vvvv EntAndHavseletio.
Notr You
ratiset glas
r Youratiset me37
1eezing The Image In 1 % Steps
can be reduced or enlarged atnt reproduction ratios horizon-nd vertically. There are twoo use this feature:
er The Reproduction Ratiosjust the reproduction ratio man-ly.
er The Dimensions Of The Original Print Papere the machine automaticallycts the proper reproduction ra-
e can change the reproduction
o from 50 % to 200 % when youan original on the exposures (contact glass). can change the reproduction
o from 50 % to 155 % when youoriginals in the optional docu-nt feeder.
Entering The Reproduction Ratios
A Press the [Ratio] key.
B Select [Mag.] with the [] or {{{{}}}}}}}}key.
C Press the [OK] key.D Select [Direct. Mag. (%)] with the
[] or {{{{}}}}}}}} key.
E Press the [OK] key.
GRDIRE0E
TPES570E
TPES570E
TPES570E
-
OPERATION
38
1
F Enter the vertical and horizontalratio.
Nr T
pe
Adj[A A
t
B P
C Awk
Entnum
A EN
B PC E
tD P
G Pre
HMathesize
I Setglation
J Press the {{{{Start}}}} key.oteo change the value entered,ress the {Clear/Stop} key andnter the new value.
usting ratios with the [], ], {~}, or {}} key
djust the vertical ratio withhe [], [], {{{{~~~~}}}}, or {{{{}}}}}}}} key.ress the {{{{{{{{}}}} key.djust the horizontal ratioith the [], [], {{{{~~~~}}}}, or {{{{}}}}}}}}ey.
ering the ratios with the ber keys
nter the vertical ratio with theumber keys.
ress the {{{{Enter}}}} key.nter the horizontal ratio with
he Number keys.ress the {{{{Enter}}}} key.
ss the [OK] key.ke sure that the original and print paper are the correct.
your original on the exposuress (contact glass) or in the op-al document feeder.
K Check the image position of thetrial or proof print.
Noter If the image position is not cor-
rect, adjust it using the [Image=] key (see P.25 AdjustingPrint Image Position).
LMake your prints.
Entering The Dimensions Of The Original And Print PaperA Press the [Ratio] key.
B Select [Mag.] with the [] or {{{{}}}}}}}}key.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
TPES570E
TPES570E
-
Directional MagnificationStretching And Squeezing The Image In 1 % Steps
C Press the [OK] key.D Sel
[]
E Pre
F Entwitthe
Nr T
pe
r Ut
G Entthe{{{{En
H Entwitthe
I Entwit
J Pre
The machine will select proper re-production ratios for vertical and39
1ect [Direct. Mag. (size)] with the or {{{{}}}}}}}} key.
ss the [OK] key.er the vertical original sizeh the Number keys and press {{{{Enter}}}} key.
oteo change the value entered,ress the {Clear/Stop} key andnter the new value.p to 999 mm, 99.9" can be en-
ered.
er the vertical print size with Number keys and press theter}}}} key.
er the horizontal original sizeh the Number keys and press {{{{Enter}}}} key.
er the horizontal print sizeh the Number keys.
ss the [OK] key.
horizontal directions.
KMake sure that the original andthe print paper are the correctsize.
L Set your original on the exposureglass (contact glass) or in the op-tional document feeder.
M Press the {{{{Start}}}} key.
N Check the image position of thetrial or proof print.
Noter If the image position is not cor-
rect, adjust it using the [Image=] key (see P.25 AdjustingPrint Image Position).
OMake your prints.
TPES570E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES120N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
-
OPERATION
40
1
Edge EraseErasing Edge Margins
This fthe ori
vvvv Usin
vvvv WheWhor mamigchinmaErakinprin
Notr You
witmmEra
A Setglationunction erases all four sides ofginal image.
g Edge Erase mode
n not using Edge Erase modeen printing from thick books,similar originals, the bindingrgin at the center and the edgesht appear on prints. The ma-e erases these margins auto-
tically. If you do not use Edgese mode using the followingd of originals, the images to beted might be also erased.
e can adjust the erased margins
h the user tools. The default is 2, 0.1. See P.150 3-9 Margin
se Area.
your original on the exposuress (contact glass) or in the op-al document feeder.
B Enter the number of prints re-quired with the Number keys.
C Press the {{{{Edge Erase}}}} key.
D Select the original size and direc-tion you use with the [], [],{~}, {{{{}}}}}}}}, {{{{||||}}}}, or {{{{{{{{}}}} key.
E Press the [OK] key.
GRERAS0E
A B A B
GRERAS1E
A B
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES040N
Stamp
Make-Up
Overlay
Edge EraseSkip Feed Economy Mode
Tint
Darker 2
Darker 1Normal
On Line
Job Separator
LighterImage Density
TPES130N
TPES530E
-
Edge EraseErasing Edge Margins
F Press the {{{{Start}}}} key.
G Chetria
Nr I
r=P
HMa41
1
ck the image position of thel or proof print.
otef the image position is not cor-ect, adjust it using the [Image
] key (see P.25 Adjustingrint Image Position).
ke your prints.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
-
OPERATION
42
1
Printing On Various Kinds Of Paper
PrintWhento 209perfor
A Pre
B Selkey
C Pre
D Adplascaing On Thick Paper you make prints on thick (157.3 g/m2, 42 to 55.6 lb) paper,m the following steps.
ss the [Ppr. Type] key.
ect [Thick] with the [] or {{{{}}}}}}}}.
ss the [OK] key.just the paper delivery sidetes to match the paper sizele on the main frame side.
Noter If necessary, lower the paper
alignment wings. See P.15Preparation For Printing.
Printing On Thin PaperWhen you make prints on thin (47.1g/m2, 12.5 lb) paper , perform the fol-lowing steps.
A Press the [Ppr. Type] key.
BMake sure that [Std.] is selected.
C Press the [OK] key.D Adjust the paper delivery side
plates to match the paper sizescale on the end plate side.
TPES520E
TPES570E
TPEH150E
TPES520E
TPEH150E
-
Printing On Various Kinds Of Paper
Noter If necessary, lower or lift the pa-
pP
E Setpad
Print
A Pre
B Sel{~}
C Pre
D Plafeetion43
1er alignment wings. See .15 Preparation For Printing.
the side pads (move the side levers to as shown).
ing On Envelopesss the [Ppr. Type] key.
ect [Special] with the [], [],, or {{{{}}}}}}}} key.
ss the [OK] key.ce the envelopes on the paperd tray as shown in the illustra-.
*: Paper feed direction
Noter When you use envelopes, the
paper feed tray capacity isabout 150 sheets (85 g/m2, 22 lb)or less than 105 mm, 4.1".
E If your envelopes do not feed inwell, lift the paper feed tray a lit-tle and bring it down so that itslants up slightly.
Printing On Special Kinds Of Paper
PreparationTo use this function, you have toregister the special paper type in[User 1] or [User 2] with the usertools. See Paper Type (User) in P.137 3. Initial Setting.
TPEY060E
TPES520E
TPES530E
GRENVE0E
TPEY991
-
OPERATION
44
1
A Press the [Ppr. Type] key.
B Sel[]
C Pre
----To If papeven itype, fA Pre
B Select one of the paper types withthe [], [], {~}, or {}} key.ect [User 1] or [User 2] with the, [], {{{{~~~~}}}}, or {{{{}}}}}}}} key.
ss the [OK] key.
prevent paper misfeeds:er misfeeds occur frequentlyf you select the proper paperollow the steps below. ss the [Ppr. Type] key.
C Press the [Select] key.D Select the paper misfeed condition
with the {~}, {}}, {|}, or {{}key.
E Press the [OK] key.If the paper misfeeds occur frequent-ly in the paper exit section even if youuse standard or thin paper and selectthe [Std.], do the following:A Set the wing guide to the Down
position with the user tools. SeeDeflector Angle in P.139 4.Mode Setting.
When A4 B5, 81/2" 11" thick paperis not delivered properly to the paperdelivery tray, do the following: A Set the wing guide to the Up po-
sition with the user tools. See De-flector Angle in P.139 4. ModeSetting.
TPES520E
TPES530E
TPES520E
TPES530E
-
Selecting A Mode To Match Your Original
Selecting A Mode To Match Your Original
Select modes
vvvv PhoDelpictthis
vvvv LettSelenalture
vvvv LettSelenalture
vvvv PenSelenal
Notr Wh
origgraTo motionLetto m
Photo
A Pre45
1one of the following four
to match your originals:
to modeicate tones of photographs andures can be reproduced with mode.
er modect this mode when your origi-
s contain only letters (no pic-s).
er/Photo modect this mode when your origi-
s contain photographs or pic-s with letters.
cil modect this mode when your origi-
s are written in pencil.
een using Photo mode to printinals with both text and photo-
phs, the text will appear lighter.avoid this, select Letter/Photode. Alternatively, use the op-al Make-up function to specify
ter mode for text areas and Pho-ode for photograph areas.
Mode Printingss the [Original] key.
B Select [Photo] with the [] or {{{{}}}}}}}}key.
C Press the [OK] key.D Adjust the screen image with the
[], [], {{{{~~~~}}}}, or {{{{}}}}}}}} key.
Noter Four coarseness settings are
available: Setting 4: coarsest Setting 3: coarser than setting
2 Setting 2: coarser than setting
1 Setting 1: coarser than the
standard setting
E Press the [OK] key.
TPES550E
TPES570E
TPES530E
-
OPERATION
46
1
F Adjust the lightness with the [],[], {{{{~~~~}}}}, or {{{{}}}}}}}} key.
G Pre
H Setglation
I Pre
J Chetria
Nr I
r=P
KMa
Letter/Photo Mode Printingss the [OK] key. your original on the exposuress (contact glass) or in the op-al document feeder.
ss the {{{{Start}}}} key.
ck the image position of thel or proof print.
otef the image position is not cor-ect, adjust it using the [Image
] key (see P.25 Adjustingrint Image Position).
ke your prints.
A Press the [Original] key.
B Select [Letter/Photo] with the []or {{{{}}}}}}}} key.
C Press the [OK] key.D Adjust the lightness with the [],
[], {{{{~~~~}}}}, or {{{{}}}}}}}} key.
E Press the [OK] key.F Set your original on the exposure
glass (contact glass) or in the op-tional document feeder.
TPES530E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
TPES550E
TPES570E
TPES530E
-
Selecting A Mode To Match Your Original
G Press the {{{{Start}}}} key.
H Chetria
Nr I
r=P
IMa
Penc
Notr Ori
be tact
A Pre
B Select [Pencil] with the [] or {{{{~~~~}}}}key.47
1
ck the image position of thel or proof print.
otef the image position is not cor-ect, adjust it using the [Image
] key (see P.25 Adjustingrint Image Position).
ke your prints.
il Mode Printingeginals written in pencil shouldset on the exposure glass (con- glass).
ss the [Original] key.
C Press the [OK] key.D Set your original on the exposure
glass (contact glass).
E Press the {{{{Start}}}} key.
F Check the image position of thetrial or proof print.
Noter If the image position is not cor-
rect, adjust it using the [Image=] key (see P.25 AdjustingPrint Image Position).
GMake your prints.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
TPES550E
TPES550E
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
-
OPERATION
48
1
Economy ModeSaving Ink
WhenEcono
Notr Prin
A Pre
B Setglation
C Pre
D Chetria
Nr I
r=P
EMa you want to save ink, selectmy mode.
ets will be lighter in this mode.
ss the {{{{Economy Mode}}}} key.
your original on the exposuress (contact glass) or in the op-al document feeder.
ss the {{{{Start}}}} key.
ck the image position of thel or proof print.
otef the image position is not cor-ect, adjust it using the [Image
] key (see P.25 Adjustingrint Image Position).
ke your prints.
Stamp
Make-Up
Overlay
Edge EraseSkip Feed Economy Mode
Tint
Darker 2
Darker 1Normal
On Line
Job Separator
LighterImage Density
TPES140N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
-
Auto CycleMaking Master And Prints At One Stroke
Auto CycleMaking Master And Prints At One
Use thmastestroke
Notr Wh
meplaorigcom{Sta
A Setglation
Nr Y
if
B Entqui
C Pre49
1 Stroke
e {Auto Cycle} key to processrs and make prints at one.
een you use the optional docu-nt feeder, it is not necessary toce originals one by one. Allinals are fed and prints arepleted after you press thert} key.
your original on the exposuress (contact glass) or in the op-al document feeder.
oteou can set up to 30 originals
nto the optional documenteeder.
er the number of prints re-red with the Number keys.
ss the {{{{Start}}}} key.
D Check the image position of thetrial or proof print.
Noter If the image position is not cor-
rect, adjust it using the [Image=] key (see P.25 AdjustingPrint Image Position).
E Press the {{{{Auto Cycle}}}} key.
Noter If you press the {Auto Cycle}
key, you cannot make proofprints by pressing the {Proof}key.
F Press the {{{{Print}}}} key.
Noter Repeat steps A through C until
all originals are printed whenyou are setting originals on theexposure glass (contact glass).
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES150N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES070N
-
OPERATION
50
1
r If you set original in the option-al document feeder, originalsaere fed and prints are complet-d automatically.
-
All Class ModeMaking Variable Numbers Of Prints From The Same Original Using All Stored Data
All Class ModeMaking Variable NumUsin
PreYoustutooNo.
Use thprintsstoredeach sThis fefrequefor all test etUsingteachemachiprintseach callowsdents memotools. make your o{Start}contaiprints51
1bers Of Prints From The Same Original
g All Stored Data
paration have to store the number of
dents in each class with the userls. See P.149 3-5 Class Enter.e {Class} key to make sets of
from the same original. All the numbers of prints are made foret.ature is useful for teachers whontly make multiple print setsthe classes. Ex. notes, handouts,c. a standard print function, ther would have to stand by thene entering the number of and pressing the {Print} key forlass. However, All Class mode you to store the number of stu-in each class into the machinery beforehand with the userThen, whenever you need toprint sets for all the classes, setriginal, select [All] and press the key. Print sets will be madening the correct number of for each class.
Noter When you set All Class mode, Job
Separation mode is automaticallyturned on. If you use Job Separa-tion mode with this function, thejob separator pulls the top sheet ofthe each set delivered to the paperdelivery tray. This marks the endof each printing set. The next cyclebegins automatically. See P.77Job SeparationSeparating