ricoh print&share - accepting as/400 pcl5 print jobs
TRANSCRIPT
www.winking.be
Ricoh Print&Shareaccepting AS/400 PCL5 print jobs
E(12U(s0p17.10h007v0s0b000T(s0B&d@&l3O&l0S&l005C&l005C(s0p17.10h007v0s0b000T(12U(s0p17.10h007v0s0b000T(s0B&d@&l3O&l0S&l005C&l1T(s0p17.10h007v0s0b000T&l3O&l0S(s0p17.10h007v0s0b000T(s0p17.10h007v0s0b
AS/400 PCL5
*Print&Share Corporate version >= 2.8.3.40
www.winking.be
Test the configuration
- Method 1: using the copy commandhttps://technet.microsoft.com/en-us/library/cc771997.aspx
- Method 2:using the lpr commandhttps://technet.microsoft.com/en-us/library/cc731926.aspx
www.winking.be
Test the configuration (copy command)
Select a .PRN file and use the “copy /b” command to print to your shared driver.
Note: print to the share name via \\127.0.0.1\<printer>Share the P&S printer to test
www.winking.be
Test the configuration (LPR command)
Make sure the Line Printer Daemon service (LPD) is running
www.winking.be
Test the configuration (LPR command)
Share the P&S printer to test
Select a .PCL file and use the “lpr –S <ip> -P <printer> <file>” command to print to your shared driver.
Note: print to the share name via \\<MyIP>\<printer>
www.winking.be
FAQ• Special character (é, è, ...) are not shown correctly.
Make sure you have an AS/400 font installed on the PC (e.g.: LINE PRINTER.TTF)
• Print&Share shows “No Documents” or does not start. When the print processor data type is set to RAW,it does not accept NT EMF print jobs.When set to NT EMF it does not accept RAW print jobs.
• OS should be DirectX 11 compatible. You can check this via DxDiag
• Print&Share corporate >= 2.8.3.40 required