RusselSmith GroupAttention to detail

LIFTING INTEGRITY / PIPELINE INTEGRITY DIVISION By Ryan Gillespie – Global Development Manager

OUR GOALS

• TO RAISE STANDARDS

• TO MINIMISE, IF NOT ELIMINATE RISK

• TO ENSURE SAFETY COMES FIRST

SERVICE STATEMENT

RusselSmith International provides specialist Inspection, Test and Consultancy services to the oil and gas industry.

We ensure our clients match or exceed local / international legislative requirements.

We ensure our clients match or exceed international standards.

We ensure our clients are working as efficient as possible without sacrificing safety.

WE MAKE SURE THAT SAFETY COMES FIRST

SERVICES OFFERED

•STATUTORY INSPECTION SURVEYS: SI2307

•LOLER AUDIT – CONTROL SYSTEMS, PROCESSES AND PROCEDURES

•CRANE SURVEY AND COMMISIONING SERVICES ( API / BS / DNV )

•HEAVY LIFT ENGINEERING, DESIGN AND CONSULTANCY

•STATUTORY DOCUMENT MANAGEMENT SYSTEM: AUDIT AND IMPLEMENTATION

•CARGO CARRYING UNITS: INSPECTION, TEST AND CERTIFICATION

•PROCUREMENT: LIFTING EQUIPMENT MATERIALS SOLUTIONS

•TRAINING SERVICES: LOLER AWARENESS , PRE/POST USE LIFTING EQUIPMENT EXAMINATION AND DISCARD CRITERIA.

•ADDITIONAL SERVICES: ROPE ACCESS, DERRICK INSPECTION (API4G, DROPS), HULL SURVEY SERVICES, ADVANCED NDT, OCTG/BHA INSPECTION AND TPI SERVICES.

STATUTORY INSPECTION SURVEYS

Lifting Equipment Engineers will mobilise to conduct 6/12 Monthly surveys of your platform. This will include:

Inspection of all loose/fixed lifting equipment on site.

Statutory Documentation Review :

All items are to have associated documentation including NDT reports, Load Test Certification or a Declaration of Conformity and previous reports of Thorough Examination.

Conduct NDT and Proof Load Test non conforming equipment when required.

On completion, Issue SI2307 register and full Survey Report. A draft copy is to be left with the platform maintenance staff or OIE/OIM.

LOLER AUDIT

Our Audit team will review your current lifting operations giving you “peace of mind” ensuring you are conforming to the latest health and safety legislation.

We will work with you to ensure compliance with LOLER SI2307 requirements.

We will work with you to meet the legislative aspects of the HSE Technical Guidance Document for safe use of lifting equipment offshore reference HSG221 and the requirements of SI3242 (MHSAW) Management of Health and Safety at Work regulations.

The audit will cover all aspects of your lifting operations including Safety Management Systems, Controls, Processes and Procedures.

PROOF LOAD TEST

We have the capability to carry out proof load tests on a wide range of equipment, from a sling or shackle to a barge crane.

Padeyes can be Proof Load Tested to 50 Ton using a specialist test rig and hydraulic rams.

Depending on project requirements we will load test your equipment using calibrated test weights and/or water weights.

For larger projects proprietary test rigs and spreader beams will be used to distribute to proof load.

CARGO CARRYING UNITS

Cargo Carrying Units (CCU,s) are utilized by the majority of companies who operate offshore. They are designed to one of three specifications:

DNV 2,7-1 MEETS IMO860 REQUIREMENTSEN12079

BS7072 – To be phased out by 01st Jan 2015

We can provide experienced personnel who will inspect and certify your containers, tool boxes and baskets.

We can also provide a load out compliance inspection team, on call.

We can also provide Cargo Carrying Units and associated lifting sets that meet IMO requirements.

CRANE SURVEY SERVICES

Our survey team members have extensive crane survey experience, and are all certified Surveyors / Lifting Equipment Engineers.

Our engineers are well versed with the requirements of API , BS and DNV design specification and requirements.

Our engineers can act as third party witness, in line with class requirements. Our engineers can also supervise maintenance tasks such as wire rope change outs , re-terminations, repairs and modifications. We can also assist with procurement and commissioning.

Should you require heavy lift consultancy and engineering support, our teams are available to assist on either a short or long term basis.

LIFTING EQUIPMENT : MATERIALS SOLUTIONS

We are able to provide a large range of items such as loose lifting equipment, man riding winches, gantry cranes and lifeboat davits. We also have close ties with crane manufacturers in Europe and Asia. We can also provide cable laid wire rope and heavy mooring equipment.

We provide fully stocked rigging lofts on request. The package includes bespoke rigging containers designed to DNV 2,7-1 or EN12079 that comes with workbench, heavy duty shelving units and storage racks.

Our Rigging Lofts are to be built to order with all equipment dispatched from Asia/EU. We also have express dispatch options from Crosby Europe and Asia.

ADDITIONAL SERVICES: DROPS SURVEY SERVICES

At RusselSmith we believe that safety comes before all else. The key is implementing preventative measures so that RISK can be eliminated or reduced as much as possible.

Safety measure are commonly put in place as a result of an action. Where safety is concerned, we need to ensure we implement precautions before incidents happen and not after when its to late.

Our team of DROPS surveyors and consultants are extremely experienced engineers with the technical knowledge that allows them to spot hazards, rectify the problems and submit recommendations with regards to improving the way we work, in order to reduce DROPS risk.

ADDITIONAL SERVICES: OCTG / BHA INSPECTION

We have OCTG / BHA Inspection teams available in Nigeria and Ghana. Teams are mobile and can carry out inspections on the rig site or at the clients yard.

Tools are inspected to APIRP7, DS-1(CAT1-CAT5), NS1/NS-2, or any client specific standard.

Full Length EMI Inspection of Drill Pipe, Wall Thickness Survey : Compression Wave UT, ID and OD checks and API drifting.

Thread Inspection, Dimensional Inspection, Wet Fluorescent MPI of Crossovers, Subs, Stabilizers and Reamers etc.

Inspection of specialist equipment such as MWD, LWD and Fishing tools.

High pressure cleaning/blasting is also available.

ADDITIONAL SERVICES: TPI VENDOR INSPECTIONQA/QC DOCUMENTATION AUDIT , EQUIPMENT INSPECTION

Our team of Vendor Inspectors are grouped by technical expertise, we recruit engineers who have experience in areas such as subsea services, well intervention, well testing and well control. All have a solid foundation in Quality Assurance and Quality Control.

Our engineers are available on call to witness, verify and audit the technical specification, statutory certification, testing, operational capabilities and maintenance history of equipment, to ensure they are to specification and meet contractual requirements and that they are Fit For Service.

This may include Well Control Equipment, Well Test Equipment, Specialist Running Tools, Oil and Gas Manifolds, Seperators, Pressure Vessels and Safety Valves (SSV)

On completion the client is provided with a full inspection, test and documentation audit report.(Example available on request)

OPERATIONAL CAPABILITIES

• GLOBAL EXPANSION PROJECT. • Established Operations office/yard in Nigeria - Port Harcourt (Onne Terminal).• Operations / Support offices in Nigeria – Lagos.• Operations / Support office in Ghana – Takaradi and Accra.• Support / logistics office in in USA – Houston ( Pipeline Integrity, OCTG Services)• Materials Supply Office: Drilling Tools / Lifting Equipment, Angola (Q2/Q3) 2013.• Operations office in Singapore (Q1/Q2) 2013.• Operations office in Thailand (Q1/Q2) 2013.• Operations office in Indonesia (Q2/Q3) 2013.• Operations office in Mozambique (Q2/Q3) 2013.• Operations office in Tanzania (Q2/Q3) 2013.• Operations office in Kenya (Q3/Q4) 2013.• Feasibility Analysis / Market Entry Caspian Region 2014.• Feasibility Analysis / Market Entry UKCS / Gulf of Mexico 2014.

TEAM COMPETENCE

• LEEA CERTIFIED • NSL CERTIFIED

• ASNT CERTIFIED

• IRATA CERTIFIED

• API CERTIFIED

The American Society for Nondestructive Testing, Inc.