rfid global developer kit - 2014-04

RFID Global Developer Ki t

Copyright 2014 - RFID Global by SOFTWORK®

Via Zanardelli, 13/A 25062 Concesio (BS) Italy - tel. +39 030 200 8149 fax +39 030 200 8146

SOFTWORK si riserva il diritto di modificare le specifiche in qualsiasi momento senza preavviso w w w . r f i d g l o b a l . i t

Pag. 1 - Rev. 23/03/2014

RFID Global Developer Kit (rev. 2014-04)

I Developer KIT RFID contengono il necessario per sperimentare le tecnologie di Identificazione Au-

tomatica in Radio Frequenza: apparati, transponder RFID, dettagliata documentazione tecnica, librerie SDK (Software Developer Kit), driver, software di esempio e test; il CD-ROM allegato contiene inoltre

letteratura informativa sulle tecnologie RFID Global di Softwork e casi applicativi.

Per informazioni tecniche sui prodotti cliccare sulle immagini dei prodotti con link al sito

Ulteriori info: www.rfidglobal.it

Tag Transponder RFID HF Sample Kit:

Il Sample Kit è la strada ideale per sperimentare le varie so-luzioni disponibili in banda HF, contiene un mix di 100 Tag

Transponder HF 13,56 Mhz.

Formati: Wet Inlay (54x86), Paper Label (18x36, 24x44, 43x43, 54x86), Film Label (33x66), Paper Ticket (54x86),

PVC Badge (54x86), Epoxy Disc Tag 16 mm, KeyFob.

Developer KIT: OEM Module CPR40.00 Series (ISO 14443-A/-B & NFC) with internal Anten-na Kit (3 interface options)

1 x CPR40.00 Reader module with internal antenna for reading and writing passiv transponder according ISO 14443-A/-B and suitable for communication with NFC de-vices (ISO 18092) (memory and processor cards) for application like Access Control,

ePayment, eTicketing, Public Transport etc. Option Models: CPR40.00-UCD: USB, RS232-TTL & dataclock interface (Cod.3093-000-00).

CPR40.00-CD: RS232-LVTTL (3,3V) & dataclock interface (Cod.3094-000-00)

CPR40.00-A - RS232 interface (Cod.3096-000-00).

1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-00)

Mix di 20 Tag Transponder HF ISO 14443-A (Mifare) 13,56 Mhz per test.

Developer KIT: OEM Module CPR.M02.VP/AB-C USB (MultiISO).

1 x CPR.M02.VP/AB-C Vicinity/Proximity Reader Module (ISO15693, ISO14443-A/B & NFC). Integrated Antenna. Serial interface RS232-TTL High Speed for ticketing (up

to 230.400 baud). (Cod. 2872-000-00). 1 x CO.TTL/USB. PCB OEM converter from TTL to USB for CPR.M02 & ISC.M02

(Cod. 9916-000-50)

1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-00) Mix di 20 Tag Transponder HF ISO 15693 13,56 Mhz per test.

Developer KIT: OEM Module CPR.M02.VP/AB-CA (MultiISO) + ANT 40x30 USB.

1 x CPR.M02.VP/AB-CA Vicinity/Proximity Reader Module (ISO15693, ISO14443-A/B & NFC) for external 50 Ohm Antennas. Se-rial interface RS232-TTL High Speed for ticketing (up to 230.400

baud). Data-/clock-interface. (Cod. 2873-000-00). 1 x ISC.ANT40/30-A 50 Ohm Antenna (Cod. 1967-000-00) 1 x CO.TTL/USB. PCB OEM converter from TTL to USB for CPR.M02

& ISC.M02 (Cod. 9916-000-50)


Mix di 20 Tag Transponder HF ISO 15693 13,56 Mhz per test.

www.rfidglobal.it

http://www.rfidglobal.it/

http://www.rfidglobal.it/prodotti-rfid/


http://www.rfidglobal.it/cpr-40-0x-moduli-oem-rfid-nfc-hf/

http://www.rfidglobal.it/cpr-m02-modulo-oem-rfid-nfc-hf-multi-iso/







Pag. 2 - Rev. 23/03/2014

Developer KIT: Desktop Reader USB CPR40.30-U (ISO 14443-A/-B & NFC).

1 x CPR40.30-U Desktop Reader with USB interface for reading and writing passiv transponder according ISO 14443-A/-B and suitable for communication with NFC devices (ISO 18092) (memory and processor cards) for application like

Access Control, ePayment, eTicketing, Public Transport etc. (Cod. 2988-000-00). 1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-00) Mix di 20 Tag Transponder HF ISO 14443-A (Mifare) 13,56 Mhz per test.

Developer KIT: RedWave Mini Proximity RED.PR50-USB Multi ISO (ISO14443-A/B, ISO15693 & NFC).

1 x RED.PR50-U RFID-NFC. RedWave Multi-ISO HF proximity Controller (read/write) (ISO14443-A/B, ISO15693 & NFC) in case with internal anten-

na. High Speed for ticketing (up to 230.400 baud). Interface: USB. Cable 1,5 mt. Range up to 12 cm. (Cod. 9916-000-01).


Developer KIT: RedWave Mini Mid-Range Ethernet Controller (read/write) HF Multi-ISO

(ISO15693, ISO14443-A/B & NFC)

1 x RED.MR50-E RFID HF Lan Desktop. RedWave Mini Mid-Range Ethernet

Controller (read/write) HF Multi-ISO (ISO15693, ISO14443-A/B & NFC), Lan interface (RJ45) - external antenna. Operating frequency: 13,56 MHz. High Speed for ticketing. Host Interfaces: Lan Ethernet RJ45 (10/100). Antenna: SMA-female plug

for external HF 50 ohm antenna (not included). RF power: 250 mW. Range up to 26 cm. (depending on tag & antenna). Dimensions: 110x70x27 mm. Power supply: 5 Volt DC (included). Reader modes: FEIG ISO Host Mode, Scan Mode. Firmware upgradable.

(Cod. 9916-056-00) 1 x RED.ANT140/140. RedWave OEM Paddle Antenna A140/140. Frequency

13,56 MHz. Power from 0,25 to 1,2 watt. Connection SMA-plug (50 Ohm), cable RG174. Dimensions: 168x138x3,6 mm. Housing solder resist. (Cod. 9140-100-00)


Developer KIT: RED.MR80.FLY-E - RedWave Reader RFID HF MultiISO SmartFly Web Cloud Device Ethernet with CPU & I/O HF Multi-ISO (ISO15693, ISO14443-A/B & NFC) + ISC.ANT-

PAD 1 x RED.MR80.FLY-E - RedWave Reader RFID HF MultiISO SmartFly Web

Cloud Device Ethernet with CPU & I/O, external antenna. CPU: 16 Bit Pro-cessor 16Mips@32Mhz, 256K Flash, 16K Ram. Web Server on board. Host In-terfaces: Lan Ethernet RJ45 (10/100). Operating frequency: 13,56 MHz. HF Multi-

ISO (ISO15693, ISO14443-A/B & NFC). Antenna: SMA-female plug for external HF 50 ohm antenna (not included). RF power: 250 mW. Range up to 26 cm. (depending on tag & antenna). Input/Output: 3 x digital output, 1 x relè 24

VDC/1A, 4 x digital input, 1 x buzzer, 1 x Led bicolor, 1 x SPI interface, 1 x I2C Interface. Real Time Clock/Calendar with battery. Slot for Micro SD memory card. Connectors: 1 x Lan Ethernet RJ45 (to host), RJ50 10 wire for ex-

ternal I/O, power connector for external 12 Volt DC. Power consumption: max. 3 W. Standard FirmWare: on board OBID FEIG management protocol, possibility of custom applications (on request). Protocol Modes: FEIG ISO Host Mode, Di-rect Lan Scan Mode, Lan/Internet Notification Mode (TCP). Dimensions:

121.9 x 78.7 x 33 mm. Firmware upgradable.. (Cod. 9916-550-20) 1 x RED.ANT140/140. RedWave OEM Paddle Antenna A140/140. Frequen-

cy 13,56 MHz. Power from 0,25 to 1,2 watt. Connection SMA-plug (50 Ohm), ca-

ble RG174. Dimensions: 168x138x3,6 mm. Housing solder resist. (Cod. 9140-100-00)



www.rfidglobal.it


http://www.rfidglobal.it/prodotti-rfid/apparati-rfid-passivi-redwave/rfid-smart-flyboard-redwave/



http://www.rfidglobal.it/cpr40-30-desktop-reader-rfid-hf-usb-nfc/

http://www.rfidglobal.it/red-pr50-redwave-desktop-reader-rfid-nfc-hf-multiiso/

http://www.rfidglobal.it/red-mr50-redwave-reader-rfid-nfc-hf-multi-iso/

http://www.rfidglobal.it/red-mr80-fly-controller-rfid-hf-ethernet-redwave-smartfly/





Pag. 3 - Rev. 23/03/2014

Controllo Accessi RFID - Wall Mount Reader RFID HF Multi ISO

Marina di Loano: controllo accessi RFID

Controller CPR02.10-B Wall Mount Multi ISO (ISO14443-A/B, ISO15693 & NFC) for Access Control (RS485, I/O & relay) 1 x CPR02.10-B Vicinity/Proximity Wall Mount Reader (RS485 & Relay) with surface spacer include.

New housing front acrylic glass. Wall installation: 84x84x23 mm. Surface installation: 84x84x43 mm. For reading and writing transponder according ISO 14443-A/-B and 15693 transponder and suitable for communi-

cation with NFC devices (ISO 18092) (memory and processor cards). Interface: RS485 (32 devices/data bus). Relay 1 closer. Digital inputs: 2 (max. cable length 3 m). Protection class IP 54. MTBF: 338.000h. Application like Access Control, ePayment, eTicketing, Public Transport etc. (Cod. 2985-000-00).



Controller CPR50.10-E Ethernet Wall Mount Multi ISO (ISO14443-A/B, ISO15693 & NFC) for Access Control (LAN PoE) 1 x CPR50.10-E Ethernet Wall Mount Controller. New housing front acrylic glass. Wall installation:

84x84x23 mm. Surface installation: 84x84x43 mm. For reading and writing transponder according ISO 14443-A/-B and 15693 transponder and suitable for communication with NFC devices (ISO 18092 - memory

and processor cards). Interface: Ethernet (10BASE-T /100 BASE-TX). Automatic MDI/MDI-X Cross over cor-rection, TCP/IP. Power over Ethernet (PoE) IEEE802.3af (44 V bis 54V DC). Pro-tection class IP 54. MTBF: 338.000h. Application like Access Control, ePayment, eTicketing, Public Transport etc. Optional: ID CPR.I/O-A

(1 x Relay & 2 digital input). (Cod. 3361-000-00). 1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-00) Mix di 20 Tag Transponder HF ISO 15693 13,56 Mhz per test.

Controller MAX50.10-RE Ethernet Wall Mount Stand Alone Multi ISO (ISO14443-A/B,

ISO15693 & NFC) for Access Control (LAN PoE) 1 x MAX50.10-RE Ethernet Wall Mount Reader for Stand Alone Access Control & Relay output. New

housing front acrylic glass with surface spacer include. Wall installation: 84x84x23 mm. Surface installation:

84x84x43 mm. For reading and writing transponder according ISO 14443-A/-B and 15693 transponder and suitable for communication with NFC devices (ISO 18092 - memory and processor cards). Interface: Ethernet (10BASE-T /100 BASE-TX). Automatic MDI/MDI-X Cross over correction, TCP/IP. Power over Ethernet (PoE)

IEEE802.3af (44 V bis 54V DC). Memory: 64 kByte nonvolatile RAM for Offline management of about 5000 User. Feature: Local intelligence, Offline access decisions, Real Time Clock, 16 time zones. Protection class IP 54. MTBF: 338.000h. Application like Access Control, ePayment, eTicketing, Public

Transport etc. (Cod. 3434-000-00). 1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-00)


www.rfidglobal.it


http://www.rfidglobal.it/max50-10-re-controllo-accessi-rfid-stand-alone-poe/

http://www.rfidglobal.it/case-history-marina-di-loano/





Pag. 4 - Rev. 23/03/2014

SDiD 1020 - Secure Digital RFID Card HF Multi ISO:

1 x WD SDiD 1020 - Secure Digital RFID Card HF Multi ISO (ISO 15693 &

ISO 14443A). Frequency: 13.56 MHz HF Band. Controller per PDA interfaccia Se-

cure Digital (SDIO v. 1.10). Terminals with SDIO enabled SD Card slots: Microsoft Pocket PC, Win Mobile 2003, Win Mobile 5.0 and 6.0, Supports Palm OS 4.1 and up. Led indication for standby, search and data communications. Development

Kit & SDK not included. (Cod. 9916-SD1020)

Developer KIT: Hand-Held Controller PRH101-USB

1 x ISC.PRH101-USB Hand-Held Reader. Hand-held Reader for 13.56 MHz Smart Label with 2.5 m cable connection. Power supply via USB (Cod. 1524.001.01).



Developer KIT: Hand-Held Bluetooth Controller PRH102-B

1 x ISC.PRH102-B - Bluetooth RFID HF Handheld Controller. Mobile Hand-Held Controller (read/write) RFID HF ISO15693 with integrated antenna.

Operating frequency: 13,56 MHz. Host Interfaces: Bluetooth Class 1. Power supply (max. 500 mA): 4 Mignon cells 1,2-1,5 V AA rechargeable (not includ-ed). Protection class: IP 30. Range up to 20 cm. (depending on tag). Reader

modes: FEIG ISO Host Mode & Scan Mode. Firmware upgradable. NiMH Battery Charger not included. (Cod. 3219-000-00).

1 x CHA.NiMH-A Battery Charger for HH BlueTooth.(Cod. 2650-000-00).



Developer KIT: RFID HF ISO15693 MidRange Controller ISC.MR102 USB (oppure RS232)+

ISC.ANT340/240 Pad Antenna

1 x ISC.MR102-USB Mid Range Controller (read/write) RFID HF ISO15693 in case for connection to external antenna (not included). Operating fre-

quency: 13,56 MHz. RF Power: 1,2 Watt. Antenna connection: 1 SMA 50 ohm. Host Interfaces: USB 2.0. Power supply: 12/24 Volt. Range up to 55 cm. (depend-ing on antenna and transponder). Dimensions: 145x85x31 mm. Reader modes:

FEIG ISO Host Mode, Scan Mode. Firmware upgradable. Power supply & cables not included. (Cod. 3605-000-00).

1 x CAB.USB-A Cable for Interface USB 1,8 mtr. (Cod. 1688.001.00).

1 x NET.12V-B Power Supply12V international. (Cod. 1688.001.00). 1 x ISC.ANT340/240 Pad Antenna for indoor applications. Frequency 13,56

MHz. Power: up to 1 watt. Dimensions (WxHxD): 337x237x8,3mm. Connection SMA-plug (50 Ohm), coax cable RG58. (Cod. 1663.000.00)


www.rfidglobal.it


http://www.rf-id.it/Prodotti/SDIO-1010-1020.htm

http://www.rfidglobal.it/isc-prh101-handheld-reader-rfid-hf/

http://www.rfidglobal.it/isc-prh102-handheld-reader-rfid-hf-bluetooth/

http://www.rfidglobal.it/isc-mr102-mid-range-reader-rfid-hf-usb/





Pag. 5 - Rev. 23/03/2014

Developer KIT: ISC.SPAD102-E HF Shielded Pad Antenna with integrated Mid Range Con-

troller RFID HF ISO15693, Lan interface

Biblioteche Document Management

1 x ISC.SPAD102-E HF Shielded Pad Antenna with integrated

Mid Range Controller RFID HF ISO15693, Lan interface. Desktop Application, Library & Document management. Operating frequency: 13,56 MHz. Integrated Acrilyc Shielded Antenna: no tag reading out-

side of the antenna area. No detuning of the antenna when installing on metal surface. Host Interfaces: LAN Ethernet (TCP/IP). Power supply: Power Over Ethernet or 12/24 Volt DC. Reading Range up to 35

cm. (depending on antenna and transponder). Dimensions: 376x276x27 mm. Protection class IP 30. Reader modes: FEIG ISO Host Mode, Scan Mode & Notification Mode. Firmware upgradable. Power supply & cables not included. (Cod. 3513-000-00).

1 x NET.12V-B Power Supply12V. (Cod. 1688.002.00). 1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-

001-00)


Developer KIT: ISC.MR102 USB (oppure RS232) RFID HF ISO15693 MidRange Controller + Industrial Antenna 650x500

1 x ISC.MR102-USB Mid Range Controller (read/write) RFID HF ISO15693 in case for connection to external antenna (not included). Op-erating frequency: 13,56 MHz. RF Power: 1,2 Watt. Antenna connection: 1 SMA 50 ohm. Host Interfaces: USB 2.0. Power supply: 12/24 Volt. Range up to 55

cm. (depending on antenna and transponder). Dimensions: 145x85x31 mm. Reader modes: FEIG ISO Host Mode, Scan Mode. Firmware upgradable. Power supply & cables not included. (Cod. 3605-000-00).

1 x CAB.USB-A Cable for Interface USB 1,8 mtr. (Cod. 1688.001.00). 1 x NET.12V-B Power Supply12V. (Cod. 1688.001.00). 1 x ISC.ANT650/500-M ABS Industrial Antenna (industrial IP 65) - Fixed

Tuning Antenna. Coax cable RG58 (3,6 m), SMA-plug. Reading distance: up to 75 cm. (Cod. 9451-000-00)


Developer KIT: ISC.MR102-PoE RFID HF ISO15693 MidRange Ethernet Controller + Indus-

trial Antenna 650x500

1 x ISC.MR102-PoE LAN Mid Range Controller (read/write) RFID HF

ISO15693 in case for connection to external antenna (not included). Op-erating frequency: 13,56 MHz. RF Power: 1,2 Watt. Antenna connection: 1 SMA 50 ohm. Host Interfaces: LAN Ethernet (TCP/IP), PoE. Power supply: 12/24 Volt. Range up to 55 cm. (depending on antenna and trans-ponder). Dimensions:

145x85x31 mm. Reader modes: FEIG ISO Host Mode, Scan Mode & Notifi-cation Mode. Firmware upgradable. Power supply & cables not included. (Cod. 3606-000-00).

1 x NET.12V-B Power Supply12V. (Cod. 1688.001.00). 1 x ISC.ANT650/500-M ABS Industrial Antenna (industrial IP 65) - Fixed

Tuning Antenna. Coax cable RG58 (3,6 m), SMA-plug. Reading distance: up to

75 cm. (Cod. 9451-000-00)


www.rfidglobal.it


http://www.rfidglobal.it/isc-spad102-shielded-pad-antenna-con-mid-range-reader-rfid-hf-epc/

http://www.rfidglobal.it/isc-mr102-mid-range-reader-rfid-hf-usb/

http://www.rf-id.it/Prodotti/ISC.ANT-LR.htm

http://www.rfidglobal.it/isc-mr102-ethernet-mid-range-reader-rfid-hf/






Pag. 6 - Rev. 23/03/2014

Developer KIT: ISC.LR1002-E Ethernet Industrial Long Range HF Controller + Industrial An-

tenna 650x500

1 x ISC.LR1002-E Long Range HF Controller LC. New Long Range Multi-

tag RFID HF (ISO 15693) Controller in case for connection to external anten-na (not included). Operating frequency: 13,56 MHz. Transmitting power 1-5 W (adjustable). Modulation 14 %. Power supply 24 V DC ± 15%. Power

consumption max. 16 VA. Antenna connection: 1 x SMA connector (50 Ω). RFID Standard: ISO 15693 (ISO 18000-3M1 - ISO 18000-3M3/ HF Gen 2 un-der request). Supply voltage on antenna output: 6,5 VDC (max. 20 mA).

Outputs: 1 Relays (24V, 1A). Inputs: 1 Optocoupler (24 V, 6 mA). Reader modes: ISO Host Mode, Scan Mode, Buffered Read Mode, Notification Mode. Host Interfaces: Ethernet (TCP/IP), USB 2.0 (HID), RS232. Others fea-tures: Anticollision function (60 tags/s.), RSSI, internal impedance monitor-

ing, internal temperature monitoring. Dimensions (housing): 255x135x65 mm. Protection class: IP54. Power supply & cables not included. (Cod. 3758-000-00)

1 x NET.24V-B Low noise Power Supply Unit Power Supply for Industrial Mid Range & Long Range Controller. (Cod. 2557-000-00).

1 x CAB.NET.24V-B-EU Cable EU Plug (Cod. 2558-000-00).

1 x ISC.ANT650/500-M ABS Industrial Antenna (industrial IP 65) - Fixed Tuning Antenna. Coax cable RG58 (3,6 m), SMA-plug. Reading dis-tance: up to 75 cm. (Cod. 9451-000-00)

1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-

00) Mix di 20 Tag Transponder HF ISO 15693 13,56 Mhz per test.

Developer KIT: ID ISC.LRM2500-A Long Range HF OEM (module) Controller High Perfor-

mance + Ind. Antenna 800x600 DAT.

1 x ISC.LRM2500-A Long Range HF OEM (module) Controller High Performance. New Long Range Multi-tag RFID HF (ISO15693) Controller

(module) for connection to external antenna (not included). Operating fre-quency: 13,56 MHz. Transmitting power 2-12 W (adjustable). Modula-tion 10 % - 30 % (adjustable). Power supply 24 V DC. Power consumption

typ. 35 W. Antenna connection: 1 x SMA connector (50 Ω). RFID Standard: ISO 15693 (ISO 18000-3 MODE 1). Supply voltage on antenna output: 8 VDC (max. 150 mA). Outputs: 2 Optocoupler (24V, 30mA); 3 Relays (24V, 1A). Inputs: 3 Optocoupler (5-24 V, 20mA). Reader modes: ISO Host Mode,

Scan Mode, Buffered Read Mode, Notification Mode. Others: Anticolli-sion function, Real time clock, RSSI data readout. Host Interfaces: Ethernet (TCP/IP), USB 2.0, RS232, RS485, USB-Host for WLAN dongle or memory

stick. Operation System: Embedded Linux (64 MB RAM, 256 MB Flash) allows on board application software. Buffer size: 10.000 data sets. Real Time Clock: accuracy: ± 1 s/day; power reserve: 1 day. Anticolli-

sion: 60 tags/s. Dimensions (module): 160x120x46 mm. No Protection Box. (Cod. 3618-000-00).

1 x NET.24V-B Low noise Power Supply Unit Power Supply for Industrial Mid Range & Long Range Controller. (Cod. 2557-000-00).

1 x CAB.NET.24V-B-EU Cable EU Plug (Cod. 2558-000-00). 1 x ISC.ANT800/600-DA Dynamic Auto Tuning Industrial Antenna.

Protection class IP 65. Max. transmitting power 8W. RF Cable RG58, 50 ohm,

3,6 m. (Cod. 1451.008.00) 1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-

00)


www.rfidglobal.it


http://www.rfidglobal.it/isc-lr1002-long-range-reader-rfid-hf-5-w/


http://www.rfidglobal.it/lr2500-long-range-reader-rfid-hf/

http://www.rfidglobal.it/isc-ant800600-da-industrial-long-range-antenna-rfid-hf/





Pag. 7 - Rev. 23/03/2014

RFID HF Gate 3D Solutions – Controllo Accessi involontario a mani libere

ISC.ANT1300/680 Slim Clear Gate

ISC.ANT1700/740 Clear Gate

ISC.ANT1690/600 Cristal Gate

ISC.ANT1300/680 Slim Clear Gate MAT System. Range 95 cm. (3D) 1 x ISC.ANT1300/680-A Clear Gate (Antenna Base). Slim 3D Gate Antenna. Inclusive: 1 x ID

ISC.LRM1002 Long Range Reader Module (4W), 1 x ISC.ANT.PSM-B Power Splitter Module & 1 x ID ISC.MAT-S Manual Antenna Tuning. (Cod. 3275-001-01).

1 x ISC.ANT1300/680-B Clear Gate (Antenna complementare). Slim Manual Tuning 3D Gate Antenna. In-clusive: 1 x ID ISC.MAT-S Manual Antenna Tuning. (Cod. 2932-001-01).

1 x ID ISC.ANT.C-A. HF Extension Antenna Coax Cable. Length: 3.60 meters. (Cod. 2096-000-00).

1 x NET.24V-B Power Supply Unit (Cod. 2557-000-00). 1 x CAB.NET.24V-B-EU Cable EU Plug (Cod. 2558-000-00). 1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-00) Montaggio, configurazione, tuning e test. Gate RFID passivi HF. Presso nostro Laboratorio.


ISC.ANT1700/740 Clear Gate. High Performance Gate 3D Auto Tuning System, Range 110 cm. (3D) 1 x ISC.ANT1700/740-A Clear Gate (Antenna Base). Auto Tuning 3D Gate Antenna. Inclusive: 1 x ID

ISC.LRM2500-B New Long Range Reader Module, 1 x ID ISC.ANT.MUX-M4 Antenna Multiplexer & 1 x ID ISC.DAT-A Dynamic Antenna Tuning. 3 relays on board, 2 Digital Output & 3 Digital Inputs. Integrated Alarm

light & sounder. Inclusive 24 V Power Supply. (Cod. 3459-001-00). 1 x ISC.ANT1700/740-B Clear Gate (Antenna complementare). Complementary Auto Tuning 3D Gate

Antenna. Inclusive: 1 x ID ISC.DAT-A Dynamic Antenna Tuning. (Cod. 3458-000-00).

1 x NET.24V-B Power Supply Unit (Cod. 2557-000-00). 1 x CAB.NET.24V-B-EU Cable EU Plug (Cod. 2558-000-00). 1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-00) Montaggio, configurazione, tuning e test. Gate RFID passivi HF. Presso nostro Laboratorio.


ISC.ANT1690/600 Cristal Gate. High Performance Gate 3D Auto Tuning System, Range 105 cm. (3D) 1 x ISC.ANT1690/600-A Crystal Gate (Antenna Base). Auto Tuning 3D Gate Antenna. Inclusive: 1 x ID

ISC.LRM2500-B New Long Range Reader Module, 1 x ID ISC.ANT.MUX Antenna Multiplexer & 1 x ID ISC.DAT-A

Dynamic Antenna Tuning. Alarm light integrated in acrylic transparent plate & acoustic indicator. (Cod. 3532-001-00).

1 x ISC.ANT1690/600-B Crystal Gate (Antenna complementare). Complementary Auto Tuning 3D

Gate Antenna. Inclusive: 1 x ID ISC.DAT-A Dynamic Antenna Tuning. (Cod. 3533-001-00).

1 x NET.24V-B Power Supply Unit (Cod. 2557-000-00). 1 x CAB.NET.24V-B-EU Cable EU Plug (Cod. 2558-000-00). 1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-001-00)

Montaggio, configurazione, tuning e test. Gate RFID passivi HF. Presso nostro Laboratorio. Mix di 20 Tag Transponder HF ISO 15693 13,56 Mhz per test.

www.rfidglobal.it


http://www.rfidglobal.it/isc-ant1300680-slim-antenna-gate-rfid-hf/

http://www.rfidglobal.it/isc-ant1700740-clear-antenna-gate-rfid-hf/

http://www.rfidglobal.it/isc-ant1690600-crystal-antenna-gate-rfid-hf/





Pag. 8 - Rev. 23/03/2014

Mobile Computer Nordic ID Merlin RFID HF 13,56 MHz ISO 15693

HTE00035 - Mobile Computer Merlin RFID HF 13,56 MHz ISO 15693 (internal antenna) with Bluetooth, WLAN – Developer Kit:

Mobile Computer Merlin RFID HF 13,56 MHz ISO 15693 (internal antenna) with Bluetooth, Summit WLAN.

Processor ARM11 532 MHz. Operating platform Microsoft® Windows® Embedded CE 6.0 R3. Memory 256 MB DDR RAM / 288 MB Flash (256 MB user accessible). Micro SD card slot (SDHC). Battery: Rechargeable, removable Lithium-Ion battery pack 2600 mAh @ 7.4V. Second battery

with pistol grip option. Display 3,5" TFT-LCD - 320 x 240 pixels (QVGA) touch screen adjustable backlight, energy saving function. RFID HF (freq. 13,56 MHz), ISO 15693, speed up to 40 tags per second.

Typical reading distance 0-20 cm, 1 Watt. Software controlled polarization. Bluetooth Class 2 + EDR. Wireless LAN: Summit Wi-Fi 802.11(a)/b/g, 802.11e. Class protection IP54. Drop resistance 1,6 m onto concrete. Dimensions Cross Dipole: 250x175x105 mm. Weight Cross

Dipole: ~ 750g. Include Standard Lithium Polymer Battery & stylus. Include SDK & Drivers. Desktop charger not included (Option: ACN00100).

ACN00100 - Merlin Desktop Charger EU - USB. Desktop charging cradle with USB connection including Power Supply and EU power cable.

Mix di 20 Tag Transponder UHF EPC Cl. 1 Gen. 2 per testing.

HTE00041 - Mobile Computer Merlin RFID HF 13,56 MHz ISO 15693 BLADE (external antenna)

with Bluetooth, WLAN – Developer Kit:

Mobile Computer Merlin RFID HF 13,56 MHz ISO 15693

BLADE (external antenna) with Bluetooth, Summit WLAN. Processor ARM11 532 MHz. Operating platform Microsoft® Windows® Embedded CE 6.0 R3. Memory 256 MB DDR RAM / 288 MB Flash (256 MB user accessible). Micro SD card slot

(SDHC). Battery: Rechargeable, removable Lithium-Ion battery pack 2600 mAh @ 7.4V. Second battery with pistol grip option. Display 3,5" TFT-LCD - 320 x 240 pixels (QVGA) touch screen

adjustable backlight, energy saving function. RFID HF (freq. 13,56 MHz), ISO 15693. Special HF external antenna (inventory & library). Speed up to 40 tags per second.

Typical reading distance 0-40 cm, 1 Watt. Software controlled polarization. Bluetooth Class 2 + EDR. Wireless LAN: Summit Wi-Fi 802.11(a)/b/g, 802.11e. Class protection IP54. Drop resistance 1,6 m onto concrete. Dimensions Cross

Dipole: 250x175x105 mm. Weight Cross Dipole: ~ 750g. Include Standard Lithium Polymer Battery & stylus. Include SDK & Drivers. Desktop charger not included (Option: ACN00100).

ACN00100 - Merlin Desktop Charger EU - USB. Desktop charging cradle with USB connection including Power Supply and EU power cable.


(*) Disponibili su richiesta altre configurazioni e opzioni

www.rfidglobal.it


http://www.rfidglobal.it/contatti/

http://www.rfidglobal.it/pda-merlin-rfid-hf/

http://www.rfidglobal.it/mobile-computer-merlin-rfid-hf-blade/





Pag. 9 - Rev. 23/03/2014

Stampanti ToshibaTec RFID HF Ready Developer Kit

Stampante ToshibaTec BSA4-TPS RFID HF Developer Kit:

Stampante Linea Office Plastic ToshibaTec BSA4-TPS200. Resolution: 203 dpi (11,8 dot). Print Width: 23 - 104 mm. Utilizzo: 8.000 la-bel/day.

Tecnology: Thermal transfer/Direct thermal. Print Head: Flat Head. Print Width: 23 - 104 mm. Print Length: 13 to 997 mm. Backing paper wide: 118 mm. Roll outside diameter: 152,4 mm (In- and outside winding possible).

Resolution: 203 dpi (8 dot). Print Speed: up to 152,4 mm/sec (6 ips). Memory capacity: 16 MB SDRAM, 16 MB Flash. Barcodes: UPC/EAN/JAN, Code 39, Code 93, Code 128 UCC, Code 128, NW7, MSI, Industrial 2 of 5, ITF, Postnet, RM4SCC, KIX-code, RSS14, Customer Bar Code. 2D Codes: Da-

ta Matrix, PDF 417, Maxicode, Micro PDF 417, QR code, CP Code. Interface: Bidirectional parallel port, USB 2.0, 10/100 MBit int. LAN Interface. Dimen-sions: 238 (W) x 332 (H) x 339 (D) mm. Weight: 12 kg (without media and

ribbon). Warranty: One year warranty. N. 1 Nastro di stampa per test a trasferimento termico (tipo standard stam-

pa su carta).

RED.PTT.BSA4.HF. RedWave RFID HF coupler contactless integration Kit for Printer Toshiba Tec BSA4TP & BSA4TM. Standard: Read Write ISO15693, ISO14443-A/B & NFC.


Stampante ToshibaTec BSA4-TMS RFID HF Developer Kit:

Stampante Linea Office Metal ToshibaTec BSA4-TMS200. Resolu-tion: 203 dpi (11,8 dot). Print Width: 23 - 104 mm. Utilizzo: 8.000

label/day. Tecnology: Thermal transfer / Direct thermal. Print Head: Flat Head. Print Width: 23 - 104 mm. Print Length: 13 to 997 mm. Backing paper wide: 118 mm. Roll outside diameter: 200 mm (In- and outside winding possi-

ble). Resolution: 203 dpi (8 dot). Print Speed: up to 152,4 mm/sec (6 ips). Memory capacity: 16 MB SDRAM, 16 MB Flash. Barcodes: UPC/EAN/JAN, Code 39, Code 93, Code 128 UCC, Code 128, NW7, MSI, Industrial 2 of 5,

ITF, Postnet, RM4SCC, KIX-code, RSS14, Customer Bar Code. 2D Codes: Data Matrix, PDF 417, Maxicode, Micro PDF 417, QR code, CP Code. Inter-face: Bidirectional parallel port, USB 2.0, 10/100 MBit int. LAN Interface.

Dimensions: 238 (W) x 332 (H) x 402 (D) mm. Weight: 15 kg (without media and ribbon). Warranty: One year warranty.

N. 1 Nastro di stampa per test a trasferimento termico (tipo standard stampa su carta).

RED.PTT.BSA4.HF. RedWave RFID HF coupler contactless integra-tion Kit for Printer Toshiba Tec BSA4TP & BSA4TM. Standard: Read Write ISO15693, ISO14443-A/B & NFC.



www.rfidglobal.it



http://www.rfidglobal.it/stampante-rfid-toshibatec-b-sa4tp/

http://www.rfidglobal.it/stampante-rfid-toshiba-tec-bsa4tm/





Pag. 10 - Rev. 23/03/2014

Standard Tag Transponder RFID UHF EPC Sample Kit:

Il Sample Kit è la strada ideale per sperimentare le varie soluzioni di-

sponibili in banda UHF, contiene un mix di 180 Tag Transponder UHF EPC Class1 Gen2:

50 x Paper Label RFID UHF EPC (vari formati)

120 x Film Label White RFID UHF EPC chip Alien Higgs3 (vari formati).

10 x Badge PVC UHF (54x86 mm.) chip Alien Higgs3

Special Hard Tag Transponder RFID UHF EPC Sample Kit:

Transponder UHF EPC Class1 Gen2 per uso speciale by Confidex.

Contiene 5 Tag per ciascuno dei seguenti modelli (tot. 50 pezzi): OnMetal Hard Tag: Ironside Global, Ironside Slim, Ironside Micro, Halo, Steel-

wave Micro. Special Tag: Carrier TOUGH, On-Metal SteelWING. Special Label: Carrier, Carrier PRO, Casey.

Developer KIT: UHF OEM Reader Module with 2 antenna output

1 x ISC.MU02.02-CU UHF OEM Reader Module (RS232-TTL / USB).

Controller OEM module UHF EPC Class 1 Gen 2. Operating frequency: 860 to 960 MHz (software adjust). Dimensions: 50x50x14 mm. RF power: 10 to

170 mW. Power supply: 5 V or via USB. Interfaces: RS232-LVTTL & USB

2.0 (terminal). Antenna conn.: 2 x U.FL. R/W modes: ISO Host & Scan. (Cod. 3478-000-00)

1 x CAB.USB-B USB Cable for ISC.MU02.02-CU. (Cod. 3541-000-00) 1 x ISC.ANT.U75/50-EU UHF near field inductive antenna module 865-

868 MHz. (Cod. 3544-000-00) 1 x ANT.U10106. RFID OEM PCB Broadband Linear Polarized UHF

Antenna, 860-960MHz range. Dimension 140 x 63 mm. (Cod. 9916-906-

00) 1 x Antenna Cables Kit. (Cod. 3540-000-00 & Cod. 9916-950-10) 1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window (Cod. 9902-

001-00) Mix di 20 Tag Transponder UHF EPC (EU - 868 MHz) per test.

Developer KIT: RED.MRU80-M2I-U. RedWave Short Range Controller UHF EPC USB (Inte-grated Near Field Antenna)

1 x RED.MRU80-M2I-U. RedWave Short Range Controller UHF EPC USB in case with 1 integrated Near Field Antenna & 1 external mul-tiplexed antenna (not included). Antennas: 1 x integrated Near Field

Antenna & 1 x SMA-female plug for external UHF antenna (not included). Host Interfaces: USB 2.0. Operating frequency: 860 to 960 MHz (software adjust) UHF EPC Class 1 Gen 2 - ISO 18000-6. RF power up to 170 mW.

Power consumption: max. 2 W. Power supply: via USB (5 Volt). Read Range: proximity with integrated Antenna (for item level tag) & up

to 200 cm with external Antenna (depending on tag & antenna

gain). Dimensions: 110x70x27 mm. Reader modes: FEIG ISO Host Mode, Scan Mode, Keyboard Emulation. Firmware upgradable. Includ-ed MiniUSB cable. (Cod. 9916-852-00)

1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window. Demo Soft-

ware. Mix di 20 Tag Transponder UHF EPC per test.

www.rfidglobal.it


http://www.rf-id.it/Prodotti/TAG-Passivi-UHF.htm

http://www.rf-id.it/Prodotti/TAG-Passivi-UHF.htm

http://www.rfidglobal.it/isc-mu02-02-rfid-uhf-oem-short-range-reader-module/

http://www.rfidglobal.it/red-mru80-m2i-u-redwave-controller-rfid-uhf/





Pag. 11 - Rev. 23/03/2014

RED.MRU80-M2I-U RedWave Short Range UHF + 1 Antenna UHF

1 x RED.MRU80-M2I-U. RedWave Short Range Controller UHF EPC USB in case with 1 integrated Near Field Antenna & 1 external multiplexed an-

tenna (not included). Antennas: 1 x integrated Near Field Antenna & 1 x SMA-female plug for external UHF antenna (not included). Host Interfaces: USB 2.0. Operating frequency: 860 to 960 MHz (software adjust) UHF EPC Class 1 Gen 2 - ISO 18000-6. RF power up to 170 mW. Power consumption: max. 2 W. Power

supply: via USB (5 Volt). Read Range: proximity with integrated Antenna (for item level tag) & up to 200 cm with external Antenna (depending on tag & antenna gain). Dimensions: 110x70x27 mm. Reader modes: FEIG ISO

Host Mode, Scan Mode, Keyboard Emulation. MiniUSB cable. (Cod. 9916-852-00) 1 x ISC.ANT.C2-A UHF Antenna Cable (2 metri). 1 x ISC.ANT.U160/160-EU Antenna UHF. Circular polarized Antenna. Gain:

4,0 dBic @ 866 MHz. Dimensions: 162x162x16 mm. (Cod. 9916-868-16)

1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window. Demo Software. Mix di 20 Tag Transponder UHF EPC per test.

RED.MRU80-M2-E RedWave Short Range Ethernet UHF + 2 x Antenna UHF

1 x RED.MRU80-M2-E. RedWave Short Range LAN Controller UHF EPC for 2

external multiplexed antenna (not included). Antennas: 2 x SMA-female plug for external UHF antenna (not included). Host Interfaces: Lan Ethernet RJ45 (10/100). Operating frequency: 860 to 960 MHz (software adjust) UHF EPC Class 1 Gen 2 - ISO 18000-6. RF power up to 170 mW. Power consumption: max. 3 W.

Power supply: external 5 Volt DC (Included). Read Range: up to 200 cm with external Antenna (depending on tag & antenna gain). Dimensions: 110x70x27 mm. Reader modes: FEIG ISO Host Mode. Firmware upgradable. (Cod.

9916-856-00) 2 x ISC.ANT.C2-A UHF Antenna Cable (2 metri).

2 x ISC.ANT.U160/160-EU Antenna UHF. Circular polarized Antenna. Gain:



Developer KIT: RED.MRU80.FLY-E - RedWave Reader RFID UHF EPC SmartFly Web Cloud De-vice Ethernet with CPU & I/O + 2 x Antenna UHF

1 x RED.MRU80.FLY-E - RedWave Reader RFID UHF EPC SmartFly Web Cloud Device Ethernet with CPU & I/O, 2 external multiplexed antennas. CPU: 16 Bit Processor 16Mips@32Mhz, 256K Flash, 16K Ram. Web Server on

board. Host Interfaces: Lan Ethernet RJ45 (10/100). Operating frequency: 860 to 960 MHz (software adjust) UHF EPC Class 1 Gen 2 - ISO 18000-6. RF power up to 170 mW. Antennas: 2 x SMA-female plug for external UHF antenna

(not included). Read Range: up to 250 cm. (depending on tag & antenna gain). I/O: 3 x digital output, 1 x relè 24 VDC/1A, 4 x digital input, 1 x buzzer, 1 x Led bicolor, 1 x SPI interface, 1 x I2C Interface. Real Time Clock/Calendar

with battery. Slot for Micro SD memory card. Connectors: 1 x Lan Ethernet RJ45 (to host), RJ50 10 wire for external I/O, power connector for external 12 Volt DC (not included). Power consumption: max. 3 W. Standard FirmWare: on board OBID FEIG management protocol, possibility of custom applications (on re-

quest). Protocol Modes: FEIG ISO Host Mode, Direct Lan Scan Mode, Lan/Internet Notification Mode (TCP). Dimensions: 121.9 x 78.7 x 33 mm. Firmware upgradable. (Cod. 9916-550-60)

2 x ISC.ANT.C2-A UHF Antenna Cable (2 metri). 2 x ISC.ANT.U160/160-EU Antenna UHF. Circular polarized Panel Anten-

na for operating frequencies in the UHF ranges 865-870 MHz (EU Region). Gain:

4,0 dBic @ 866 MHz. Antenna connection SMA-Male socket (50 Ohm). Dimen-sions (WxHxD): 162x162x16 mm. (Cod. 9916-868-16)


www.rfidglobal.it




http://www.rfidglobal.it/red-mru80-m2i-u-redwave-controller-rfid-uhf/

http://www.rfidglobal.it/red-mru80-m2-e-redwave-controller-rfid-uhf/

http://www.rfidglobal.it/red-mru80-fly-e-ethernet-redwave-smart-controller-rfid-uhf/






Pag. 12 - Rev. 23/03/2014

Developer KIT: ISC.PRHD102-USB Multi-Frequency (HF/UHF) USB Handheld.

Dual Frequency HF/UHF

1 x ISC.PRHD102-USB-EU HF/UHF - USB Handheld Dual Fre-

quency Controller. Combined HF / UHF Multi-tag Handheld Reader

with integrated HF and UHF antenna. Interface: USB (HID,12 Mbit); 2,5 m cable. Read Range: UHF up to 180 cm. - HF up to 18 cm. (depending on tag). Protection class: IP 30. Power supply (max. 500

mA): USB - High Powered Interface. Supported transponders: HF - ISO 15693, UHF EPC Gen2. Reader modes: FEIG ISO Host Mode, Scan Mode, Keyboard Emulation. Firmware upgradable. (Cod. 3148-001-00)

1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window. Demo Software. Mix di 20 Tag Transponder HF/UHF EPC per test.

Developer KIT: ISC.PRHD102-B Multi-frequency (HF/UHF) Bluetooth Handheld.

Dual Frequency HF/UHF

1 x ISC.PRHD102-B-EU HF/UHF - Bluetooth Handheld Dual

Frequency Controller. Combined HF / UHF Multi-tag Handheld Read-er with integrated HF and UHF antenna. Interface: Bluetooth (serial port profile). Read Range: UHF up to 180 cm. - HF up to 18 cm. (depending on tag). Protection class: IP 30. Power supply (max. 500

mA): 4 Mignon cells 1,2-1,5 V AA rechargeable (not included). Sup-ported transponders: HF - ISO 15693, UHF EPC Gen2. Reader modes: FEIG ISO Host Mode, Scan Mode. Firmware upgradable. NiMH Battery

Charger not included. (Cod. 2994-000-00). 1 x CHA.NiMH-A Battery Charger for HH BlueTooth.(Cod. 2650-000-

00).

1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window. Demo

Software. Mix di 20 Tag Transponder HF/UHF EPC per test.

Developer KIT: ISC MRU102-USB - UHF Mid Range Controller + 1 Antenna UHF 16x16

1 x ISC.MRU102-USB UHF EPC Controller with 1 external and 1 integrated

antenna NF (multiplexed). Operating Frequency 860 MHz to 960 MHz. Standard

UHF EPC Class1 Gen2 ISO 18000-6. Output Power: 50-500 mW (configurable). Read

Range: up to 4 m. (in combination with UHF Antenna ANT.U270/270). Antenna Con-

nector: 1 x external SMA-Female (50 ohm), 1 x integrated Near Field Antenna. Host

Interfaces: USB (Full Speed). Protocol Modes: FEIG ISO Host Mode, Buffered

Read Mode, Scan Mode (USB). Power Supply: 12-24 V DC. (Cod. 3777-000-00). 1 x ID NET.12V-B Power Supply12V international. (Cod. 1688-001-00) 1 x ISC.ANT.U160/160-EU Antenna UHF. Circular polarized Antenna. Gain:


1 x ISC.ANT.C2-A UHF Antenna Cable (2 metri). (Cod. 1654.002.00)

1 x ISC.SDK.WIN. Librerie SDK per ambiente MS Window. Demo Software. Mix di 20 Tag Transponder UHF EPC (EU - 868 MHz) per test.

www.rfidglobal.it


http://www.rfidglobal.it/isc-prhd102-handheld-reader-rfid-uhf/

http://www.rfidglobal.it/isc-prhd102-handheld-reader-rfid-uhf/

http://www.rfidglobal.it/isc-mru102-mid-range-reader-rfid-uhf-multiplexer/





Pag. 13 - Rev. 23/03/2014

Developer KIT: ISC MRU102-PoE Lan - UHF Mid Range Controller + 1 Antenna UHF 27x27

1 x ID ISC.MRU102-PoE UHF EPC Controller (LAN) with 1 external and 1 in-

tegrated antenna NF (multiplexed). Operating Frequency 860 MHz to 960 MHz.

Standard UHF EPC Class1 Gen2 ISO 18000-6. Output Power: 50-500 mW (configu-

rable). Read Range: up to 5 m. (in combination with UHF Antenna ANT.U270/270).

Antenna Connector: 1 x external SMA-Female (50 ohm), 1 x integrated Near Field

Antenna. Host Interfaces: Lan Ethernet RJ45 (PoE). Protocol Modes: FEIG ISO

Host Mode, Buffered Read Mode, Notification Mode (Lan). Power Supply: 12-

24 V DC (or PoE). (Cod. 3778-000-00). 1 x ID NET.12V-B Power Supply12V international. (Cod. 1688-001-00)

1 x ISC.ANT.U270/270-EU Antenna UHF. Circular polarized Antenna for ope-

rating frequencies in the UHF (865-870 MHz optimized for EU Region). Gain: 9.0

dBic@866 MHz. Width (3 dB beam): 65° x 65°. Protection class IP65. Antenna

connection SMA (50 Ohm). Dimensions: 270x270x57 mm. (Cod. 3199-000-00) 1 x ISC.ANT.U270/270-MS. Mounting Set for ANT.U270/270 UHF Antenna.

1 x ISC.ANT.C2-A UHF Antenna Cable (2 metri). (Cod. 1654.002.00)


Industrial Long Range Gate RFID UHF EPC – Entry Level

UHF Gate Long Range Kit: ISC.LRU1002-E Fixed UHF Long Range + 2 Antenne UHF 27x27 +

Cavi e Mounting set

ISC.LRU1002-E

Kit: 2 X ANT.U270x270

1 x ID ISC.LRU1002-E Fixed UHF Long Range Reader RF 2 W, Antenna

4 out Multiplexed. Operating Frequency: 865 to 868 MHz (EU) EPC Class 1

Gen 2 - ISO 18000-6. Radio Regulation: EN 302 208 (Europa). High speed an-

ti-collision. DRM (Dense Reader Mode). Host Interface: RS232, Ethernet,

USB, Wiegand (scan mode interface). RF Power: from 100 mW to 2 Watt

in step 100 mW. 16 LED for diagnosis & antenna status. Outputs: 2 Optocou-

pler 24 VDC/30 mA & 1 Relay 24 VDC/1A. Inputs: 1 Optocoupler max. 24 VDC

/ 20 mA. Antenna connection: 4 x SMA multiplexed. Protection Class IP 53, IP

64 (with protection cap - optional). Host protocols: ISO Host Mode, Scan

Mode (HID), Buffered Read Mode & Notification Mode. Range up to 8

mtr. Readout of RSSI data for localization of identified transponders. Power

supply: 24 VDC +/- 10% (Cod. 4127-000-00). 1 x NET.24V-B Low noise Power Supply Unit Power Supply for Industrial

Mid Range & Long Range Controller. (Cod. 2557-000-00)

1 x CAB.NET.24V-B-EU Cable with European Plug (Cod. 2558-000-00)

2 x ISC.ANT.U270/270-EU Antenna UHF. Circular polarized Antenna for

ope-rating frequencies in the UHF (865-870 MHz optimized for EU Region).

Gain: 9.0 dBic@866 MHz. Width (3 dB beam): 65° x 65°. Protection class

IP65. Antenna connection SMA (50 Ohm). Dimensions: 270x270x57 mm.

(Cod. 3199-000-00) 2 x ISC.ANT.U270/270-MS. Mounting Set for ANT.U270/270 UHF An-

tenna.

2 x ISC.ANT.C6-A UHF Antenna Cable (6 metri). (Cod. 1654-003-00)


www.rfidglobal.it


http://www.rfidglobal.it/isc-mru102-mid-range-reader-rfid-uhf-multiplexer/

http://www.rfidglobal.it/isc-ant-u270270-antenna-rfid-uhf/

http://www.rfidglobal.it/isc-lru1002-long-range-reader-rfid-uhf-epc/






Pag. 14 - Rev. 23/03/2014

Industrial Long Range Gate RFID UHF EPC – 2 Watt High Performance

UHF Gate Long Range Kit: ISC.LRU3000-A UHF controller High Performance + 2 Antenne UHF

27x27 + Cavi e Mounting set

ISC.LRU3000-A


1 x ID ISC.LRU3000-A-EU Fixed UHF Long Range Reader High Per-

formance. Frequenza: 860 to 960 MHz EPC Class 1 Gen 2 - ISO 18000-6.

High speed anti-collision. DRM (Dense Reader Mode). Host Interface: RS232,

RS485, Ethernet, USB, USB-Host for WLAN dongle or memory. RF Power:

Max. 2 Watt. 8 LED for diagnosis & antenna status. Outputs: 2 Optocoupler

24 VDC & 3 Relays 24 VDC/1A. Inputs: 5 Optocoupler max. 24 VDC / 20

mA. Antenna connection: 4 x SMA external multiplexed. ACC with Linux op-

erating system for on-board application (64 Mb Ram, 256 Mb Flash). Host

protocols: FEIG ISO Host, Scan Mode, Buffered Read Mode, Notification

Mode & Tag filtering. Low Noise Transmitter & High receiver sensitivity for

an enlarged & homogeneous tag detection range. Range up to 10 mtr. Full

support for the UHF Multiplexer ID ISC.ANT.UMUX. Readout of RSSI data for

localization of identified transponders. (Cod. 3548-000-00). 1 x NET.24V-B Power Supply Unit (necessita di ID CAB.NET.24V-B-EU Ca-

ble with European Plug) (Cod. 2557-000-00) + 1 x CAB.NET.24V-B-EU

Cable with European Plug (Cod. 2558-000-00) 2 x ISC.ANT.U270/270-EU Antenna UHF. Circular polarized Panel Anten-

na for ope-rating frequencies in the UHF ranges 865-870 MHz (Optimized for

EU Region). Gain: 9.0 dBic@866 MHz. Width (3 dB beam): 65° x 65°. Pro-tection class IP65. Antenna connection SMA (50 Ohm). Dimensions (WxHxD): 270x270x57 mm. Weight: 1.210g. (Cod. 3199-000-00)

2 x ID ISC.ANT.U270/270-MS. Mounting Set for UHF Antenna. (Cod. 3309-000-00)



Add-On Kit: 2 Antenne UHF ISC.ANT.U270/270 + Cavi e Mounting set

2 x ISC.ANT.U270/270-EU Antenna UHF. Circular polarized Panel Antenna

UHF ranges 865-870 MHz. Gain: 9.0 dBic@866 MHz. Width (3 dB beam): 65° x 65°. Protection class IP65. Antenna connection SMA (50 Ohm). Dimensions (WxHxD): 270x270x57 mm. Weight: 1.210g. (Cod. 3199-000-00)

2 x ID ISC.ANT.U270/270-MS. Mounting Set for UHF Antenna. (Cod.

3309-000-00) 2 x ISC.ANT.C6-A UHF Antenna Cable (6 metri). (Cod. 1654-003-00)

www.rfidglobal.it


http://www.rfidglobal.it/case-history-animo/

http://www.rfidglobal.it/isc-lru3000-hp-long-range-reader-rfid-uhf-epc/







Pag. 15 - Rev. 23/03/2014

Industrial Long Range Gate RFID UHF EPC – 4 Watt High Performance Lan

PoE

UHF Gate Long Range Kit: ISC.LRU3500-A UHF controller Lan PoE, 4 Watt High Performance + 2 Antenne UHF 27x27 + Cavi e Mounting set

ISC.LRU3500-A


1 x ID ISC.LRU3500-A EU Fixed UHF Long Range Reader High Per-

formance PoE. Operating Frequency: 865 to 868 MHz (EU) EPC Class 1 Gen

2 - ISO 18000-6. Radio Regulation: EN 302 208 (Europa). High speed anti-

collision. DRM (Dense Reader Mode). Interface: RS232, RS485, Ethernet

PoE (Power over Ethernet), USB, USB-Host for WLAN dongle or

memory. RF Power: Max. 4 Watt. 8 LED for diagnosis & antenna status.

Outputs: 2 Optocoupler 24 VDC & 3 Relays 24 VDC/1A. Inputs: 5 Optocou-

pler max. 24 VDC / 20 mA. Antenna connection: 4 x SMA external multi-

plexed. ACC with Linux operating system for on-board application (64 Mb

Ram, 256 Mb Flash). Protection Class IP 53, IP 64 (with protection cap - op-

tional). Host protocols: FEIG ISO Host, Scan Mode, Buffered Read

Mode, Notification Mode & Tag filtering. Low Noise Transmitter & High

receiver sensitivity for an enlarged & homogeneous tag detection range.

Range up to 15 mtr. Full support for the UHF Multiplexer ID

ISC.ANT.UMUX. Readout of RSSI data for localization of identified tran-

sponders. Power supply: 24 V DC (± 10 %) or Power over Ethernet (PoE).

(Cod. 3551-000-00).

1 x NET.24V-B Power Supply Unit (necessita di ID CAB.NET.24V-B-EU Ca-ble with European Plug) (Cod. 2557-000-00) + 1 x CAB.NET.24V-B-EU Cable with European Plug (Cod. 2558-000-00)

4 x ISC.ANT.U270/270-EU Antenna UHF. Circular polarized Panel Anten-na for ope-rating frequencies in the UHF ranges 865-870 MHz (Optimized for EU Region). Gain: 9.0 dBic@866 MHz. Width (3 dB beam): 65° x 65°. Pro-

tection class IP65. Antenna connection SMA (50 Ohm). Housing ASA-ABS Light grey. Dimensions (WxHxD): 270x270x57 mm. Weight: 1.210g. (Cod. 3199-000-00)

4 x ID ISC.ANT.U270/270-MS. Mounting Set for UHF Antenna. (Cod. 3309-000-00)



www.rfidglobal.it


http://www.rfidglobal.it/case-history-cooperativa-agricola-ortoamico/

http://www.rfidglobal.it/isc-lru3500-long-range-reader-rfid-uhf/







Pag. 16 - Rev. 23/03/2014

RFID UHF RedWave Smart Totem & Gate Web Cloud Device with CPU & I/O

RED.STU102-FLY-E

RED.SGU102-FLY-E/W

Soluzione Totem & Gate completa UHF EPC Gen2 per l’identificazione in

anticollisione di oggetti e persone nei settori del retail, industria, logistica,

etc.

UHF Slim Totem Ethernet: RED.STU102-FLY-E. RedWave Slim Totem RFID UHF EPC SmartFly

Web Cloud Device Ethernet with CPU & I/O

1 x RED.STU102-FLY-E. RedWave Slim Totem RFID UHF EPC SmartFly Web Cloud Device Ethernet

with CPU & I/O - (one antenna) for access control. CPU: 16 Bit Processor 16Mips@32Mhz, 256K Flash,

16K Ram. Web Server. Host Interfaces: Lan Ethernet RJ45 (10/100). Operating frequency: 860 to 960

MHz (software adjust) UHF EPC Class 1 Gen 2 - ISO 18000-6. Output Power: 50-500 mW (configurable).

Read Range up to 300 cm (depending on tag & physical environment). UHF Antennas: 1 internal mul-

tiplexed (Gain: 4,0 dBic). Input/Output (internal): 3 x digital output, 1 x relè 24 VDC/1A, 4 x digital input.

Optical Led Strip & internal buzzer. Real Time Clock/Calendar with battery. Slot for Micro SD memory card.

Power consumption: max. 3 W. Standard FirmWare: on board OBID FEIG management protocol, possibility of

custom applications (on request). Protocol Modes: FEIG ISO Host Mode, Direct Lan Scan Mode,

Lan/Internet Notification Mode (TCP). Housing Plastic ASA. Colour: gray (More colours on request). Di-

mension (HxWxD): 1530 x 263 x 54/127 (top/base) mm. Firmware upgradable. Protection class: IP32. In-

cluded 12 VDC Power Supply. CD with SW driver, SDK/Library (MS Window) & Sample Software. Options:

sensor for automatic gate wake-up, metal base. (New product 2013). (Cod. 9916-550-80.1). 1 x Base autoportante in metallo per RedWave Slim Gate, complete di bulloneria e fori per passag-

gio cavi, colore nero.. (Cod. 9916-860-90)

UHF Slim Gate Ethernet Kit: RED.STU102-FLY-E. RedWave Slim Totem RFID UHF EPC Smart-

Fly Web Cloud Device Ethernet with CPU & I/O

1 x RED.SGU102-FLY-E. RedWave Slim Gate RFID UHF EPC SmartFly Web Cloud Device Ethernet

with CPU & I/O - gate solution (pair of antennas) for people access control. CPU: 16 Bit Processor

16Mips@32Mhz, 256K Flash, 16K Ram. Web Server. Host Interfaces: Lan Ethernet RJ45 (10/100). Op-

erating frequency: 860 to 960 MHz (software adjust) UHF EPC Class 1 Gen 2 - ISO 18000-6. Output Pow-

er: 50-500 mW (configurable). Read Range up to 300 cm (depending on tag & physical environment).

UHF Antennas: 2 internal multiplexed (Gain: 4,0 dBic). Input/Output (internal): 3 x digital output, 1 x relè 24

VDC/1A, 4 x digital input. Optical Led Strip & internal buzzer. Real Time Clock/Calendar with battery. Slot for

Micro SD memory card. Power consumption: max. 3 W. Standard FirmWare: on board OBID FEIG manage-

ment protocol, possibility of custom applications (on request). Protocol Modes: FEIG ISO Host Mode, Di-

rect Lan Scan Mode, Lan/Internet Notification Mode (TCP). Housing Plastic ASA. Colour: gray (More

colours on request). Dimension (HxWxD): 1530 x 263 x 54/127 (top/base) mm. Firmware upgradable. Protec-

tion class: IP32. Included 12 VDC Power Supply. CD with SW driver, SDK/Library (MS Window) & Sample

Software. Options: sensor for automatic gate wake-up, metal base. (New product 2013). (Cod. 9916-550-82). 1 x Coppia di basi autoportanti in metallo per RedWave Slim Gate, complete di bulloneria e fori per

passaggio cavi, colore nero.. (Cod. 9916-860-90)

www.rfidglobal.it




http://www.rfidglobal.it/red-sgu102-fly-slim-gate-rfid-uhf-redwave-ethernet/

http://www.rfidglobal.it/red-sgu102-fly-slim-gate-rfid-uhf-redwave-wi-fi/





Pag. 17 - Rev. 23/03/2014

RFID UHF RedWave Smart Totem & Gate Web Cloud Device with CPU & I/O

UHF Slim Gate WIFI Kit: RED.STU102-FLY-W. RedWave Slim Totem RFID UHF EPC SmartFly

Web Cloud Device WiFi with CPU & I/O

1 x RED.SGU102-FLY-W. RedWave Slim Gate RFID UHF EPC SmartFly Web Cloud Device WiFi with

CPU & I/O - gate solution (pair of antennas) for people access control. CPU: 16 Bit Processor

16Mips@32Mhz, 256K Flash, 16K Ram. Web Server. Host Interfaces: Wi-Fi controller 802.11 b/g/n.

Operating frequency: 860 to 960 MHz (software adjust) UHF EPC Class 1 Gen 2 - ISO 18000-6. Output

Power: 50-500 mW (configurable). Read Range up to 300 cm (depending on tag & physical environ-

ment). UHF Antennas: 2 internal multiplexed (Gain: 4,0 dBic). Input/Output (internal): 3 x digital output, 1

x relè 24 VDC/1A, 4 x digital input. Optical Led Strip & internal buzzer. Real Time Clock/Calendar with battery.

Slot for Micro SD memory card. Power consumption: max. 3 W. Standard FirmWare: on board OBID FEIG

management protocol, possibility of custom applications (on request). Protocol Modes: FEIG ISO Host

Mode, Direct Lan Scan Mode, Lan/Internet Notification Mode (TCP). Housing Plastic ASA. Colour: gray

(More colours on request). Dimension (HxWxD): 1530 x 263 x 54/127 (top/base) mm. Firmware upgradable.

Protection class: IP32. Included 12 VDC Power Supply. CD with SW driver, SDK/Library (MS Window) & Sam-

ple Software. Options: sensor for automatic gate wake-up, metal base. (New product 2013). (Cod. 9916-554-

82). 1 x Coppia di basi autoportanti in metallo per RedWave Slim Gate, complete di bulloneria e fori per

passaggio cavi, colore nero.. (Cod. 9916-860-90)

RFID UHF RedWave Slim Gate HP Kit

UHF Slim Gate Solution RED.SGU200-E RedWave LAN I/O High Performance Kit:

1 x ID RED.SGU200-E. RedWave Slim Gate UHF-EPC LAN Ethernet I/O high

performance. Gate Solution (pair of antennas), standard EPC Class 1 Gen 2 -

ISO 18000-6C. Host Inter-faces: Lan Ethernet RJ45 (10/100) & RS232. Op-

erating frequency: 860 to 960 MHz (soft-ware adjust). RF power up to 300 mW.

Read Range up to 250 cm (depending on tag & physical environment). UHF An-

tennas: 2 internal multiplexed (Gain: 4,0 dBic). Digital In-put/Output optocoupler

& Relè (24 V DC/ 2A). Optical Led Strip. Housing Plastic ASA. Colour: black (More

colours available on request). Dimension (HxWxD): 1530 x 263 x 54/127

(top/base) mm. (metal base not included). DRM (Dense Reader Mode). Reader

mo-des: FEIG ISO Host, Scan mode, Buffering Read mode & Notification mode.

Firmware u-pgradable. Protection class: IP32. Included 24 VDC Power Supply. CD

with SW driver, SDK/Library (MS Window) & Sample Software. (Cod. 9916-860-

40). 1 x Coppia di basi autoportanti in metallo per RedWave Slim Gate, comple-

te di bulloneria e fori per passaggio cavi, colore nero.. (Cod. 9916-860-90)

1 x ISC.SDK.WIN. Librerie SDK. Demo Software. Mix di 20 Tag Transponder UHF EPC

www.rfidglobal.it


http://www.rfidglobal.it/red-sgu102-fly-slim-gate-rfid-uhf-redwave-wi-fi/





Pag. 18 - Rev. 23/03/2014

Mobile Computer Nordic ID Morphic 500 mW RFID UHF Cross Dipole

Caratteristiche comuni ai Developer Kit Morphic RFID UHF

Mobile Computer Nordic ID Morphic UHF RFID 500 mW Cross Dipole. Processor ARM11 532 MHz. Operat-ing platform Microsoft® Windows® Embedded CE 6.0. Memory 256 MB DDR RAM / 288 MB Flash (256 MB user

accessible). Micro SD card slot (SDHC). Display 320 x 240 pixels (QVGA) touch screen adjustable backlight, ener-gy saving function. RFID UHF with external antenna Cross Dipole, ISO 18000-6C (EPC Class 1 Gen 2), 868 MHz, RF Power up to 500 mW. Read Range up to 200 cm. Inventory speed up to 150 tags/sec. Blue-tooth Class 2 + EDR. Battery LiPo 2260 mAh. Dimensions 147x54x28 mm. Weight 190 g (incl. battery). Class

protection IP54. Drop resistance 1,5 m onto concrete. Include Universal wall adapter (EU,UK,USA), Double ca-

pacity (~2260 mAh) lithium polymer battery, Hand strap & stylus. Include SDK & Drivers. Mix di 20 Tag Transponder UHF EPC Cl. 1 Gen. 2 per testing.

Configurazioni Developer Kit:

HTB00025 - Mobile Computer Morphic UHF RFID 500 mW Cross Dipole

with Bluetooth, Summit WLAN. Kit:

Opzioni integrate: WLan 802.11 b/g/i/e & WPA2.

HTB00027 - Mobile Computer Morphic UHF RFID 500 mW Cross Dipole with Bluetooth, Summit WLAN, Imager 2D. Kit:

Opzioni integrate: WLan 802.11 b/g/i/e & WPA2. Imager 2D, GS1 DataBar, High visibility LED.

HTB00032 - Mobile Computer Morphic UHF RFID 500 mW Cross Dipole

with Bluetooth, Summit WLAN, 3G comm., Barcode Laser. Kit:

Opzioni integrate: WLan 802.11 b/g/i/e & WPA2. Mobile communication 3G. Barcode Laser, GS1 DataBar (104

scans/second bidirectional).

Eventuali opzioni per Morphic:

ACN00066 - Morphic Desktop Charger (USB & Ethernet) - Ricarica il PDA Morphic ed eventuale seconda batteria aggiuntiva (non inclusa).

ACN00083 - Nordic ID Morphic Holster with belt clip. Fondina protetti-va a cintura.


www.rfidglobal.it



http://www.rfidglobal.it/pda-morphic-rfid-uhf-cd/





Pag. 19 - Rev. 23/03/2014

Mobile Computer Nordic ID Merlin 500 mW RFID UHF Cross Dipole

Caratteristiche comuni a tutti i Developer Kit Merlin

Mobile Computer Nordic ID Merlin Black HT RFID UHF 500 mW Cross Dipole with Bluetooth. Processor ARM11 532 MHz. Operating platform Microsoft® Windows® Embedded CE 6.0 R3. Memory 256 MB DDR RAM /

288 MB Flash (256 MB user accessible). Micro SD card slot (SDHC). Battery: Rechargeable, removable Lithium-Ion battery pack 2600 mAh @ 7.4V. Double battery in pistol grip versions. Display 3,5" TFT-LCD - 320 x 240 pix-els (QVGA) touch screen adjustable backlight, energy saving function. RFID UHF Cross Dipole: ISO 18000-6C (EPC Class 1 Gen 2) - Supports all common tag functionalities. Adjustable output power up to +30 dBm

(1W) ERP in 1 dB steps. Reading distance up to 5 m. Software controlled polarization. Bluetooth Class 2 + EDR. Class protection IP54. Drop resistance 1,6 m onto concrete. Dimensions Cross Dipole: 250x175x105 mm. Weight Cross Dipole: ~ 750g. Include Standard Lithium Polymer Battery, Pistol Grip with extra battery & stylus.

Include SDK & Drivers. Desktop charger not included (Option: ACN00100).

Configurazioni Developer Kit:

HTE00056 - Mobile Computer Merlin RFID UHF 500 mW Cross Dipole with Bluetooth, Summit WLAN. – Developer Kit:

Opzioni incluse nel Kit: ACN00100 - Merlin Desktop Charger EU - USB. Desktop charging cradle with USB connection including Pow-

er Supply and EU power cable.


HTE00060 - Mobile Computer Merlin RFID UHF 500 mW Cross Dipole

with Bluetooth, Summit WLAN, BarCode Laser. – Developer Kit:

Opzioni incluse nel Kit:

ACN00100 - Merlin Desktop Charger EU - USB. Desktop charging cradle with USB connection including Pow-er Supply and EU power cable.


HTE00077 - Mobile Computer Merlin RFID UHF 500 mW Cross Dipole with Bluetooth, Summit WLAN, 3G Mobile communication, Imager 2D.

– Dev. Kit:

Opzioni incluse nel Kit:

ACN00100 - Merlin Desktop Charger EU - USB. Desktop charging cradle with USB connection including Pow-er Supply and EU power cable.



www.rfidglobal.it



http://www.rfidglobal.it/mobile-computer-merlin-rfid-uhf-cross-dipole/





Pag. 20 - Rev. 23/03/2014

Stampanti ToshibaTec RFID UHF Ready Developer Kit

Stampante ToshibaTec BSA4-TMS RFID UHF Developer Kit:

Stampante Linea Office Metal ToshibaTec BSA4-TMS200. Resolution: 203 dpi (11,8 dot). Print Width: 23 - 104 mm. Utilizzo: 8.000 label/day. Tecnology: Thermal transfer / Direct thermal. Print Head: Flat Head. Print

Width: 23 - 104 mm. Print Length: 13 to 997 mm. Backing paper wide: 118 mm. Roll outside diameter: 200 mm (In- and outside winding possible). Resolu-tion: 203 dpi (8 dot). Print Speed: up to 152,4 mm/sec (6 ips). Memory capaci-ty: 16 MB SDRAM, 16 MB Flash. Barcodes: UPC/EAN/JAN, Code 39, Code 93,

Code 128 UCC, Code 128, NW7, MSI, Industrial 2 of 5, ITF, Postnet, RM4SCC, KIX-code, RSS14, Customer Bar Code. 2D Codes: Data Matrix, PDF 417, Maxicode, Micro PDF 417, QR code, CP Code. Interface: Bidirectional parallel

port, USB 2.0, 10/100 MBit int. LAN Interface. Dimensions: 238 (W) x 332 (H) x 402 (D) mm. Weight: 15 kg (without media and ribbon). Warranty: One year warranty.

N. 1 Nastro di stampa per test a trasferimento termico (tipo standard stampa su carta).

RED.PTT.BSA4.UHF. RedWave RFID UHF coupler contactless integration Kit for Printer Toshiba BSA4TM. Standard: Read Write ISO 18000-6C

(EPC Class 1 Gen 2) Mix di 20 Tag Transponder HF ISO 15693 13,56 Mhz per test.

Stampante Industriale ToshibaTec BSX4T RFID UHF Developer Kit:

Stampante Thermal transfer/Direct thermal Linea Industrial Toshi-

baTec BSX4T. Print Head: Edge Type. Resolution: 203 dpi (8 dot). Print Width: 27 to 104 mm. Print Length: 6 to 1498 mm. Print Speed: up to

254 mm/sec. Utilizzo: 30.000 label/day. Roll outside diameter: 200 mm. Backing paper wide: 140 mm. Memory ca-pacity: 8MB SD-RAM, 4MB flash. Barcodes: UPC/EAN/JAN, Code 39, Code 93,

Code 128, EAN 128, NW7, MSI,2 of 5 Industrial, ITF, Postnet, RM4scc, KIX-Code, RSS14. 2D Codes: Data Matrix, PDF 417, Maxicode, QR code, Micro PDF 417. Interface: 2 serial ports, Bi-directionial parallel port. Dimensions: 291x308x460 mm. Options: Swing cutter, Rotary cutter, Peel off module & re-

winder, PCMCIA Interface, 10/100 MBit int. LAN Interface, USB 1.1 RFID Kit, Ribbon save, Start/Stop Interface, WiFi Lan. Weight: 18 kg (without media and ribbon). One year warranty.

Save Ribbon. Economizzatore nastro per BSX4 1 x Nastro di stampa per test a trasferimento termico (tipo standard). ID RED.PTT.BSA4.UHF. RedWave RFID UHF coupler contactless integra-

tion Kit for Printer Toshiba BSA4TM. Standard: Read Write ISO 18000-6C (EPC Class 1 Gen 2)


BASX4TETH - LAN Board Ethernet 10/100Mb Interface per BSX4T


www.rfidglobal.it



http://www.rfidglobal.it/stampante-rfid-toshiba-tec-bsa4tm/

http://www.rfidglobal.it/stampante-rfid-toshiba-b-sx4t-industriale/

rfid global developer kit - 2014-04

Documents

m02 cod

rfid global developer

rs232 interface cod

tag transponder hf iso

m02 isc

il sample kit

oem module cpr40

ohm antenna cod