rfid c116 sensors catalog · 2014-09-10 · when tag misalignment occurs. if your tag will be...

Pan

elC

onn

ect

Co

nnec

tion

Sys

tem

sIn

tro

duc

tion

Qui

ck S

elec

tion

Gen

eral

11-1

RFID

Contents

Visit our website: www.ab.com/catalogs

Preferred availability cat. nos. are printed in bold.

General InformationQuick Selection Guide .................................................................................................................................. 1-2

Overview ............................................................................................................................................................ Page 11-3

ProductsInterface Blocks............................................................................................................................................... Page 11-6

Rectangular Transceivers ............................................................................................................................Page 11-8

Square Transceivers ...................................................................................................................................... Page 11-10

M30 Transceivers............................................................................................................................................ Page 11-12

M18 Transceivers............................................................................................................................................ Page 11-14

Tags...................................................................................................................................................................... Page 11-16

Handheld Interfaces....................................................................................................................................... Page 11-19

IndexesCat. No. Index.................................................................................................................................................. Page 13-1

Comprehensive Product Index..................................................................................................................Page 14-1

New

Description Interface Block Transceivers Tags Handheld Interface

Features

• EtherNet/IP interface• Embedded switch with DLR• ISO 15693 / ISO 18000-3 M1• Read/write ICODE tags SLI,

SL2• 1 and 2 channel interface

offered• 2 inputs with no outputs or

1 input and 1 output• Compatible with all

transceivers

• Maximum distance fromEtherNet/IP interface is 300 ft

• Read/write ICODE tags SLI,SL2

• Read/write speeds up to625 B/s

• ISO 15693 / ISO 18000-3 M1• Max sensing range: 168 mm

(rectangular), 85 mm (square),60 mm (M30), and 30 mm(M18)

• ICODE ISO 15693 compliant• EEPROM/FRAM memory• Tag memory options: 128 B,

64 B, 256 B, and 2 KB• Passive tags (no battery)• Tag styles: label, smart card,

disc, square• Reusable Rislan tags assure

long life in harshenvironments

• High impact resistant tags• Mount on metal tags• High temperature tags

• 13.56 MHz high frequencyRFID solution

• Wireless connectivity forstreamlined dataflow

• Rugged for commercial andindustrial environments

• IP65 rated – protects againstdust and rain

• Touch screen• 45- or 52-key models• Stylus and stylus holder• Compatible with all

Allen-Bradley RFID tags• Rechargeable battery

Frequency 13.56 MHz 13.56 MHz 13.56 MHz 13.56 MHz

Connector (4) M12 M12 — —

EnclosureRating IP67 IP67 IP68, IP69K IP65

ProductSelection Page 11-6

Rectangular (Page 11-8)Square (Page 11-10)

M30 (Page 11-12)M18 (Page 11-14)

Page 11-16 Page 11-19

PanelC

onnect

Co

nnection S

ystems

Introd

uction

Quick S

election

General


Preferred availability cat. nos. are printed in bold.11-2

RFID

Quick Selection Guide

New

Radio Frequency Identification (RFID)Allen-Bradley industrial RFID system consists of three key components:� Communication Interfaces: To either a network or controller.� Transceivers: At each point or station in the manufacturing process where identification or the reading/writing of information is desired.� RFID Tags: One for each item, pallet, tote, or transport fixture used in the application.

System Features� 1- and 2-channel EtherNet/IP™ interface offered� Embedded switch, with Device Level Ring (DLR)� Rugged transceiver styles designed for industrial locations� 13.56 MHz high frequency technology ideal for light industrial applications� Tag memory options: 128 B, 64 B, 256 B, and 2 KB� Read/write speeds up to 625 B/s� Different tag styles with sensing distances of up to 7.3 in. (185 mm)� Reusable Rislan® tags assure long life and reliable performance in harsh environments� AOP and AOI available

Dual-Channel Integrated Architecture Application Diagram

Pan

elC

onn

ect

Co

nnec

tion

Sys

tem

sIn

tro

duc

tion

Qui

ck S

elec

tion

Gen

eral


Preferred availability cat. nos. are printed in bold. 11-3

RFID

Overview

PanelView™ Plus

EthernetSwitch

AnotherEthernetDevice

Max. 300 ftCable Length

General I/O

PowerSupply

Interface Transceivers

FlatPack

VersaCube™

M30Cylindrical

M18Cylindrical

1769 CompactLogix™

New

Selection Flowchart

PanelC

onnect

Co

nnection S

ystems

Introd

uction

Quick S

election

General



RFID

Overview

�Production steps contained within a manufacturing facility.‡ Production steps outside of manufacturing facility.

High FrequencyHF 13.56 MHz

ICODE

Open or ClosedLoop System

Closed

UHF900 MHz

Gen2(See Encompass

partner)

Open

Do you require tagSecurity, Privacy, or High

Temperature?

SLI-S Tags64 Bytes

Security

SLI-L Tags256 Bytes

Privacy

Sensingdistance?

Transceiver:Square (40x40)

Recommended tagsize:

30…50 mm

2…4 in.

Transceivers:M18, M30


10…30 mm

0…2 in.

4+ in.

1

3

Tag SpeedFast vs Slow/

Stopped

Transceiver:Rectangular (80x90)


50…86 mm

Fast

How muchdata storage

required?

Up to 128 Bytes

Up to 2 kBytes

No

Data storageServer vs Tag

(Machinescommunicate?)

SLI Tags FRAM TagsSLI Tags128 Bytes

High Temp

4

2

5 6 7

8

9

(most commonly usedin RFID HF applications)

New

1. High Frequency RFID products are typically used in industrial applications to follow a product through the manufacturing process. The transceiver to tagrange is typically less than 7.3 in (185 mm). ICODE technology is advantageous because the tags are available from numerous suppliers in an infinite numberof packages.

2. An application can track the process via the tag either by storing the data directly on the tag or linking the UID (Unique Identifier) to data in a server. In highspeed applications (>1.5 m/s), it's recommended to read only the UID into the PLC. If the tags are used on multiple machines that do not communicate witheach other, then the data is usually stored on the tag. By storing all the data on the tag, the data will be saved through power cycle events on the machineas well.

3. SLI-S tags are designed for applications requiring high tag security. Memory management can be password protected to ensure that only authorized usersget read/write access.

4. SLI-L tags are designed for applications which require privacy. Tags have a password protected Privacy Mode in which the tag will not respond tocommands until it receives the correct password.

5. High temperature tags are used when the tag needs to be used in extreme temperature applications. Temperature profiles are provided to show the length oftime the tag can withstand the given temperature.

6. Allen-Bradley offers label tags, smart cards, disc tags, and square tags, as well as tags for specialty applications such as high-impact and mounton metal. SLI tags are most commonly used in high frequency RFID applications.

7. These tags are ideal for applications where the tags move throughout the facility on machines that are not communicating with each other.

8. This section helps determine the recommended transceiver for your application. If you have a high speed application, it's best to choose the largesttransceiver which will provide the largest antenna range. This will provide the longest time the tag is in the field for read/write functions. This will also helpwhen tag misalignment occurs. If your tag will be stopped when all read/write functions occur and tag misalignment is not an issue, smaller transceivers canbe used.

9. The larger the transceiver, the larger the antenna field. The size of the field will determine how much time the tag will be in the field and the amount of tagmisalignment can occur without read/write issues.

Pan

elC

onn

ect

Co

nnec

tion

Sys

tem

sIn

tro

duc

tion

Qui

ck S

elec

tion

Gen

eral



RFID

Overview

New

DescriptionThe EtherNet/IP interface block is designed to solve industrial highfrequency 13.56 MHz RFID applications which require networking ormultiple read/write points. Local LEDs allow for quick visualdiagnosis of module status, network status, I/O status, and powerstatus.

Each interface block can have up to two transceivers and twogeneral I/O devices. This allows the RFID system to be easilyintegrated into an existing architecture. It also allows the RFIDsystem to respond to sensor input and vice versa. For example, asensor can detect the presence of an object and send a signal tothe transceiver to read the RFID tag.

The high frequency 13.56 MHz RFID system is also highlyconfigurable and expandable. The transceivers can be mounted upto 300 ft away from the interface blocks. The EtherNet/IP ports areconfigured as an embedded switch with Device Level Ring (DLR),which allows multiple interface blocks to be connected in star, tree,linear, and ring topologies. The RFID system is ISO 15693 compliantand compatible with tags of many different styles and sizes.

Features� 13.56 MHz RFID� ISO 15693 / ISO 18000-3 M1� Sealed housing rated for IP67 eliminates enclosure costs� Low installation cost and easy to replace without rewiring because

industry-standard M12 DC micro connectors are used forconnection to the EtherNet/IP network and auxiliary power supply.I/O connectors are sealed M12 DC micro style

� Single or dual-port EtherNet/IP, configured as an embeddedswitch, supports star, tree, linear, and ring topologies

� Isolated power output port allows output device to be turned off,while maintaining power to the transceivers, the input port, andthe EtherNet/IP connection

� Outputs electronically protected� One- or two-channel RFID interface offered� Two inputs/no outputs or one input/one output� Compatible with all transceivers

Specifications

General

Enclosure Type Rating IP67

Mounting Type On-Machine, Panel

OperatingTemperature� -20…+60 °C (-4…+140 °F)

Non-OperatingTemperature� -40…+85 °C (-40…+185 °F)

Relative Humidity 5…95% ‡

Operating Shock 30 g

Weight 0.20 kg (0.45 lb)

Vibration 5 g at 10…500 Hz

Compliance CE, cULus, C-Tick

Electrical

Supply Voltage 24V DC

Max. Output Currentper RFID Transceiver

Port100 mA @ 24V DC

Max. Output CurrentRating per I/O Point 0.5 A @ 30V

Max. Output SurgeCurrent Rating per I/O

Point1.2 A

Max. Current for InputDevice Power per I/O

Point5 mA @ 30V

Potential Max. Aux.Current per Module 4 A

�Unpackaged‡ Non-condensing

Module Status LED

Indicator State Summary

Off No power

Flashing Green Standby

Green Device operational

Flashing Red Minor fault

Red Major fault

Network Status LED


Off No power or no IP address

Flashing Green No connections

Green Connected

Flashing Red Connection timeout

Red Duplicate IP

Link1 and Link2 LEDs


Off No link

Green 100 Mbps

Flashing Green 100 Mbps/active

Yellow 10 Mbps

Flashing Yellow 10 Mbps/active

I/O LED


Off I/O off

Yellow I/O on

RFID Port LED


Off No power

Flashing Green No tag present, but communicating

Green Communicating

Flashing Red No transceiver connected

Amber Tag present

PanelC

onnect

Co

nnection S

ystems

Introd

uction

Quick S

election

General

High Frequency 13.56 MHz ICODE



RFID

EtherNet/IP Interface Block

New

Product Selection

Interface Port � Inputs Outputs Cat. No.

1 transceiver 1 1 56RF-IN-IPS12

2 transceivers 1 1 56RF-IN-IPD22

2 transceivers 2 — 56RF-IN-IPD22A

� Configured as embedded switch. Supports star, tree, linear, and ringtopologies.

Pinouts

Accessories

Interface Connector Style Connector Type No. of Pins Shielding Wire Size, AWG Cat. No.

Transceiver

DC Micro (M12)patchcord

Straight female tostraight male

4

Shielded 22

889D-F5FCDM-J�

DC Micro (M12)cordset

Straight female 889D-F5FC-J‡

Straight male 889D-M5FC-J‡

M12 terminalchamber

Straight female— 18…22

871A-TS5-D1

Straight male 871A-TS5-DM1

Auxiliary Power

DC Micro (M12)patchcord

Straight female tostraight male

4

Unshielded 22

889D-F4ACDM-�

DC Micro (M12)cordset

Straight female 889D-F4AC-‡

Straight male 889D-M4AC-‡

M12 terminalchamber

Straight female— 22

871A-TS4-D

Straight male 871A-TS4-DM

EtherNet/IP M12 D-codepatchcord

Straight male tostraight male

4

Shielded 26

1585D-M4UBDM-§

Straight male to rightangle male 1585D-M4UBDE-§

Right angle male toright angle male 1585D-E4UBDE-§

Straight male tostraight male

Unshielded 24

1585D-M4TBDM-§

Straight male to rightangle male 1585D-M4TBDE-§

Right angle male toright angle male 1585D-E4TBDE-§

�Replace symbol with 0M3 (0.3 m), 1 (1 m), 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable lengths.‡ Replace symbol with 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable lengths.§ Available in 0.3, 0.6, 1, 2, 5, 10, 15 m, and increments of 5 m up to 75 m.

EtherNet/IP Power ConnectorRFID Transceiver

Interface Input Connector Output Connector

Connector Diagram 3

21

4

4 3

1

2 5

43

1

25

43

1

25

43

1

2

Pin Function Function Function Function Function

1 TX+ Output Power + Sensors Power + Sensor Power Not Used

2 RX+ Module Power + Data+ Not Used Not Used

3 TX- Module Power - Sensor Power - Return Return

4 RX- Output Power - Data - Input Output

5 Shell — Shield/FE Shield/FE Shield/FE

Pan

elC

onn

ect

Co

nnec

tion

Sys

tem

sIn

tro

duc

tion

Qui

ck S

elec

tion

Gen

eral




RFID

EtherNet/IP Interface Block

Approximate DimensionsDimensions are not intended to be used for installation purposes.

37(1.46)

179(7.05)

169(6.64)

43.25(1.7)

19.8(78)

166.5(6.56)

27(1.06)

New

RFID

Rectangular Transceiver

11-8Visit our website: www.ab.com/catalogs


High Frequency 13.56 MHz ICODE Transceivers

General

Quick S

election

Introd

uction

Co

nnection S

ystems

PanelC

onnect

Description

Features� 13.56 MHz high frequency RFID solution� ICODE ISO 15693/ISO 18000-3 M1 Compliant� Read/write speeds up to 625 B/s� Built-in LEDs for diagnostics� Reliable performance in harsh environments

Typical Applications� Asset tracking� Data acquisition� Product handling� Tool management� Automotive� Food and pharmaceutical� Security and entrance

Specifications

Scanning Area


Max. CurrentConsumption 100 mA

Tag Compatibility ICODE tags SLI, SL2ISO 15693/ISO 18000-3 M1

Connector M12 4-pin male

CommunicationSystems Half duplex communication system (RS-485)

Baud Rate (Host) 9600, 19200, 38400, and 115200 bps

Frequency 13.56 MHz

Baud Rate (Tag) 26.48 Kbps

Data Length 8-bit

Operating Temperature -25…+70 °C (-13…+158 °F)

Storage Temperature -40…+85 °C (-40…+185 °F)

Operating Humidity� 35…95% RH

Storage Humidity� 25…85% RH


Shock Resistance 50 g

Enclosure Rating IP67

Recommended SensingDistance‡ 4 in. (102 mm)

Max. Sensing Distance‡ 6.6 in. (168 mm)

Max. Distance fromInterface Module 300 ft (91.4 m)


Type of Equipment Industrial control

�Non-condensing‡ Range reference for a 50 mm diameter tag.

Note: Ideal tag distance for maximum performance is 70…130 mm.

The rectangular transceiver is the largest transceiver in theAllen-Bradley high frequency 13.56 MHz RFID family measuring 80 x90 mm. This transceiver is ISO 15693 compliant and can read/writeICODE tags SLI and SL2, allowing infinite tag configuration optionsfrom various manufacturers. Local LEDs allow for quick visualdiagnosis of module status and read/write status.

Rectangular transceivers are recommended for high-speed/high-performance applications because of their large sensing range.Transceivers can be mounted up to 300 ft (91.4 m) away from theinterface module, and tags are readable from distances up to 6.6 in.(168 mm). This transceiver has an enclosure rating of IP67 and isdesigned to withstand harsh industrial environments.

Misalignment

Sens

ing

Dist

ance

[mm

]

0

50

100

150

Side Lobe Side Lobe

OFF OFF

OFF

0-150 -100 -50 50 100 150

130

70

ON

New

RFID

Rectangular Transceiver




Gen

eral

Qui

ck S

elec

tion

Intr

od

uctio

nC

onn

ectio

n S

yste

ms

Pan

elC

onn

ect

Product Selection

Description Cat. No.Rectangular 80 x 90 mm transceiver 56RF-TR-8090

LED Illumination Pattern

LED Display Content

Module Status LEDGreen light Power ON

No illumination No power

Read/Write LED

Green light Normal operation

Flashing green (shortinterval) Communicating

Flashing amber (shortinterval) Sensing tag

Flashing red (longinterval) Communication error

Flashing green (longinterval) No tag

Connector Pinout

Pin Signal

1 24V DC

2 Data +

3 GND

4 Data -

AccessoriesCordsets

No. of Pins Color Code Shield Wire Size [AWG]

Cat. No. �

StraightFemale

Right AngleFemale Straight Male

Right AngleMale

4-pin A Foil Shield 22 889D-F5FC-J2 889D-R5FC-J2 889D-M5FC-J2 889D-E5FC-J2

�The 2 at the end of the cat. no. is for 2 m cable length. Replace the 2 with 5 (5 m) or 10 (10 m) for standard cable lengths. Example: Cat. No. 889D-F5FC-J2becomes Cat. No. 889D-F5FC-J10.

Patchcords


Cat. No. �

Straight FemaleStraight Male

Straight FemaleRight Angle

Female

Right AngleFemale

Straight Male

Right AngleFemale

Right Angle Male4-pin A Foil Shield 22 889D-F5FCDM-J2 889D-F5FCDE-J2 889D-R5FCDM-J2 889D-R5FCDE-J2

�The 2 at the end of the cat. no.is for 2 m cable length. Replace the 2 with 0M3 (0.3 m), 1 (1 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Example: Cat.No. 889D-F5FCDM-J2 becomes Cat. No. 889D-F5FCDM-J0M3.

Note: Stainless steel connectors may be ordered by adding an S to the cat. no. (e.g. Cat. No. 889DS-F5FCDM-J*).


94(3.7)

65(2.56)

65(2.56)

83(3.27)

106.5(4.19)

40(1.57)

0.2(0.01)

4 3

1

2

New

RFID

Square Transceiver




General

Quick S

election

Introd

uction

Co

nnection S

ystems

PanelC

onnect

Description

Features� 13.56 MHz high frequency RFID solution� ICODE ISO 15693/ISO 18000-3 M1 Compliant� Read/write speeds up to 625 B/s� Transceivers can be mounted up to 300 ft away from interface

modules� Built-in LEDs for diagnostics� Universal mounting� Reliable performance in harsh environments


Specifications

Scanning Area




Connector M12 4-pin male



Frequency 13.56 MHz


Data Length 8-bit








Recommended SensingDistance‡ 2 in. (50 mm)

Max. Sensing Distance‡ 3.3 in. (85 mm)

Max. Distance fromInterface Module 300 ft (91.4 m)


Type of Equipment Industrial control


The square transceiver is designed for use with the Allen-Bradleyhigh frequency 13.56 MHz RFID system. This transceiver is ISO15693 compliant and can read/write ICODE tags SLI and SL2,allowing infinite tag configuration options from variousmanufacturers. Local LEDs allow for quick visual diagnosis ofmodule status and read/write status.

Square transceivers have universal mounting capability and measure40 x 40 mm. Transceivers can be mounted up to 300 ft (91.4 m)away from the interface module, and tags are readable fromdistances up to 3.3 in. (85 mm). This transceiver has an enclosurerating of IP67 and is designed to withstand harsh industrialenvironments.

Note: Ideal tag distance for maximum performance is 30…60 mm.Misalignment

Sens

ing

Dist

ance

[mm

]

0

100

Side Lobe Side Lobe

OFF OFF

OFF

0-80 -40 40 80

60

30

ON

New

RFID

Square Transceiver




Gen

eral

Qui

ck S

elec

tion

Intr

od

uctio

nC

onn

ectio

n S

yste

ms

Pan

elC

onn

ect


Product Selection

Description Cat. No.Square 40 x 40 mm transceiver 56RF-TR-4040


LED Display Content



Read/Write LED






Connector Pinout

Pin Signal

1 24V DC

2 Data +

3 GND

4 Data -

AccessoriesCordsets


Cat. No. �

StraightFemale


Right AngleMale



Patchcords


Cat. No. �



Female

Right AngleFemale

Straight Male

Right AngleFemale




5.4(0.21)

12(0.47)

30(1.18)

30(1.18)

46 (1.81)40 (1.57)

7.5 (0.3)

40(1.57)

40(1.57)

73.5 (2.89)

4 3

1

2

New

RFID

Cylindrical M30 Transceiver




General

Quick S

election

Introd

uction

Co

nnection S

ystems

PanelC

onnect

Description

Features� 13.56 MHz high-frequency RFID solution� ICODE ISO 15693/ISO 18000-3 M1 Compliant� Read/write speeds up to 625 B/s� Transceivers can be mounted up to 300 ft away from interface

modules� Built-in LEDs for diagnostics� Reliable performance in harsh environments


Specifications




Connector M12 4-Pin Male



Frequency 13.56 MHz


Data Length 8-bit








Recommended SensingDistance‡ 45 mm

Max. Sensing Distance‡ 75 mm

Max. Distance fromInterface Module 300 ft

Compliance CE


The cylindrical M30 transceiver is designed for use with theAllen-Bradley high frequency 13.56 MHz RFID system. Thistransceiver is ISO 15693 compliant and can read/write ICODE tagsSLI and SL2, allowing infinite tag configuration options from variousmanufacturers. Local LEDs allow for quick visual diagnosis ofmodule status and read/write status.

Cylindrical M30 transceivers are recommended for panel mountingand for use with smaller tags with a diameter of 10…30 mm.Transceivers can be mounted up to 300 ft (91.4 m) away from theinterface module, and tags are readable from distances up to 3.0 in.(75 mm). This transceiver has an enclosure rating of IP67 and isdesigned to withstand harsh industrial environments.

Scanning Area


Misalignment

Sens

ing

Dist

ance

[mm

]

0

50

100

Side Lobe Side Lobe

OFF OFF

ON

OFF

0-80 -40 40 80

30

10

70

90

55

New

RFID





Gen

eral

Qui

ck S

elec

tion

Intr

od

uctio

nC

onn

ectio

n S

yste

ms

Pan

elC

onn

ect

Product Selection

Description Cat. No.M30 cylindrical transceiver 56RF-TR-M30


LED Display Content



Read/Write LED






Connector Pinout

Pin Signal

1 24V DC

2 Data +

3 GND

4 Data -


AccessoriesCordsets


Cat. No. �

StraightFemale


Right AngleMale



Patchcords


Cat. No. �



Female

Right AngleFemale

Straight Male

Right AngleFemale




Mounting Brackets

Description Cat. No.

Swivel/tilt style 60-2439

Right angle style 871A-BRN30

4 3

1

2

Read/WriteStatus LED

Ø28

73

63

12.2 35.8 1

7

M30x1.5 M12x1

Ø28Ø14

ModuleStatus LED

New

RFID





General

Quick S

election

Introd

uction

Co

nnection S

ystems

PanelC

onnect

Description

Features� 13.56 MHz high frequency RFID solution� ICODE ISO 15693/ISO 18000-3 M1 Compliant� Read/write speeds up to 625 B/s� Transceivers can be mounted up to 300 ft away from interface

modules� Built-in LEDs for diagnostics� Reliable performance in harsh environments


Specifications




Connector M12 4-Pin Male



Frequency 13.56 MHz


Data Length 8-bit








Recommended SensingDistance‡ 30 mm

Max. Sensing Distance‡ 55 mm

Max. Distance fromInterface Module 300 ft

Compliance CE


The cylindrical M18 transceiver is designed for use with theAllen-Bradley high frequency 13.56 MHz RFID system. Thistransceiver is ISO 15693 compliant and can read/write ICODE tagsSLI and SL2, allowing infinite tag configuration options from variousmanufacturers. Local LEDs allow for quick visual diagnosis ofmodule status and read/write status.

Cylindrical M18 transceivers are recommended for panel mountingand for use with smaller tags with a diameter of 10…30 mm.Transceivers can be mounted up to 300 ft (91.4 m) away from theinterface module, and tags are readable from distances up to 2.2 in.(55 mm). This transceiver has an enclosure rating of IP67 and isdesigned to withstand harsh industrial environments.

Scanning Area

Misalignment

Sens

ing

Dist

ance

[mm

]

0

45

100

Side Lobe Side Lobe

OFF OFF

ON

OFF

0-80 -40 40 80

20

40

60

80


New

RFID





Gen

eral

Qui

ck S

elec

tion

Intr

od

uctio

nC

onn

ectio

n S

yste

ms

Pan

elC

onn

ect

Product Selection

Description Cat. No.M18 cylindrical transceiver 56RF-TR-M18


LED Display Content



Read/Write LED






Connector Pinout

Pin Signal

1 24V DC

2 Data +

3 GND

4 Data -

AccessoriesCordsets


Cat. No. �

StraightFemale


Right AngleMale



Patchcords


Cat. No. �



Female

Right AngleFemale

Straight Male

Right AngleFemale



Mounting Brackets


Swivel/tilt style 60-2649

Right angle style 871A-BRN18



4 3

1

2

Ø16.6

M18x1 M12x1

Ø16.6

35.812.2

63

73

7

Read/WriteStatus LED Module

Status LED

New

RFID

ICODE Tags



High Frequency 13.56 MHz ICODE Tags

General

Quick S

election

Introd

uction

Co

nnection S

ystems

PanelC

onnect

DescriptionIndustrial RFID systems are designed to withstand harshenvironments. Reusable read/write tags allow for flexibility ininformation and application. ISO 15693 is an open standard for highfrequency 13.56 MHz RFID. ICODE tags are available in manydifferent styles and sizes to fit most applications.

Features� 13.56 MHz high frequency RFID solution� ICODE ISO 15693 Compliant� EEPROM/FRAM Memory� 64 B, 128 B, 256 B, and 2 KB read/write tags� Read/write speeds up to 500 B/s� Passive tags (no battery)� Reusable Rislan® tags� Reliable performance in harsh environments� Label tags� Smart card tags� Disc tags� Square tags� High impact resistant tags� Mount on metal tags� High temperature tags� ICODE tags have data retention of 10 years and 100,000 write

cycles� FRAM 2K B tags are rated for 10 billion read/write cycles


Specifications

Disc Tags (10 mm)

Memory Size and Type ICODE SLI-S 256 B – EEPROM


Materials Epoxy, transparent yellowish

Weight 130 mg

Disc Tags (16 mm)

Memory Size and Type ICODE SLI 128 B – EEPROMICODE SLI-L 64 B – EEPROM

Axial Compression Strength 1000 N

Radial Compression Strength 1000 N


Protection IP69K

Materials Modified thermoplastic, white

Weight 1.0 g ± 0.15 g

Disc Tags (20, 30, and 50 mm)

Memory Size and Type ICODE SLI 128 B – EEPROMF-Mem 2K B

Vibration (IEC 68.2.6) 10 g at 10…2000 Hz

Shock (IEC 68.2.29) 40 g


Protection IP69K

Materials PA6 Modified, black

Weight1.3 g (20 mm)3.0 g (30 mm)9.5 g (50 mm)

Mount on Metal Options 20 mm, 50 mm

Label Tags (50 x 50 mm, 54 x 86 mm)

Memory Size and Type ICODE SLIx 128 B – EEPROMICODE SLI 128 B – EEPROM

Bending Diameter > 50 mm, tension less than 10 N

Static Pressure < 10 MPa (10 N/mm²)


Transponder Face Material Opaque Matt Paper 79

Transponder BackingMaterial Siliconized Paper 56

Transponder AntennaMaterial Aluminum

Smart Cards (54 x 86 mm)

Memory Size and Type ICODE SLI 128 B – EEPROM

Operating Temperature(ISO/IEC 10373) -35…+50 °C (-30…+122 °F)

Materials PVC, white

High Impact Resist Tags (35 mm disc)


Vibration (IEC 68.2.6) 10 g at 10…2000 Hz

Shock (IEC 68.2.29) 40 g


Protection IP69K

Materials PA6 high impact

Weight 7.8 g

High Temperature Tags (50 x 50 mm)


Data Retention 10 years

Write Endurance 100,000 cycles

RF Data Transfer Rate 26 kbit/s

Temperature Range -55…+240 °C (-67…+464 °F)

Protection IP68

Materials PPS resin

Weight 25.7 g

New

RFID

ICODE Tags




Gen

eral

Qui

ck S

elec

tion

Intr

od

uctio

nC

onn

ectio

n S

yste

ms

Pan

elC

onn

ect

Product Selection

TypeMemory

Size

AvailableUser

Memory Outline Dimensions Application

Transceiver-Tag Sensing Distance, Max. [mm (in.)]

Cat. No.Rectangular Square M30 M18

SLI 128 B 112 B

Label54x86 mm

Mostcommon

185 100 72 52 56RF-TG-5486

50x50 mm 150 90 66 50 56RF-TG-5050

Smart card 54x86 mm 185 100 79 55 56RF-TG-5486SC

Disc

16 mm 76 51 35 27 56RF-TG-16

20 mm 78 53 41 32 56RF-TG-20

30 mm 106 68 52 40 56RF-TG-30

50 mm 168 85 75 55 56RF-TG-50

35 mm High impactresist 105 60 45 38 56RF-TG-35HIR

20 mm Mount onmetal

35 23 20 18 56RF-TG-20MOM

50 mm 63 32 29 25 56RF-TG-50MOM

SLI-L 64 B 32 B Disc 16 mm Privacy 76 51 35 27 56RF-TG-16-64B

SLI-S 256 B 160 B Disc 10 mm Security 45 20 16 12 56RF-TG-10-256B

FRAM 2048 B 2K B Disc

20 mmHigh

memory

78 53 36 28 56RF-TG-20-2KB

30 mm 106 68 44 35 56RF-TG-30-2KB

50 mm 168 85 62 48 56RF-TG-50-2KB

SLI 128 B 112 B Square 50 mm Hightemperature 155 95 71 59 56RF-TG-50HT


Disc Tags

Ø16±0.2(0.63±0.008)

Ø20±0.5(0.787±0.02)

Ø30±0.5(1.18±0.02)

2.5±0.5(0.1±0.02)

2.5±0.5(0.1±0.02)

2.9±0.1(0.114±0.004)

Ø5.2±0.3(0.205±0.012)

Ø5.2±0.3(0.205±0.012)

Ø50±0.5(1.969±0.02)

Ø34±0.3(1.339±0.012)

Ø5.6±0.3(220±0.012)

8±0.3(0.315±0.012)

3.5±0.5(0.188±0.02)

Ø9.5±0.3(0.374±0.012)

1±0.3(0.04±0.012)

Smart Cards High Temperature Tags

85.6 (3.37)

53.98(2.13)

51±0.5(2.008±0.02)

51±0.5(2.008±0.02)

6.5(0.256)

Ø5.5 (0.217)Ø10.5(0.413)

New

RFID

ICODE Tags




General

Quick S

election

Introd

uction

Co

nnection S

ystems

PanelC

onnect

Label Tags56 (2.126)2 (0.079)

Marking of Bad Ones Unwinding Direction

47(1.85)

47 (1.85)

56(2.126)

50(1.969)

50 (1.969)

15 (0

.59)

1.5 (0.059)

1.5 (0.059)

Unwinding Direction

Marking of Bad Ones

54(2.126)

86 (3.386)82 (3.228)

57(2.244)

50(1.969)

1.5 (0.059)96 (3.78)

3.5

(0.1

38)

2 (0

.079

)

2 (0.079)

New

RFID

Handheld Interfaces




Gen

eral

Qui

ck S

elec

tion

Intr

od

uctio

nC

onn

ectio

n S

yste

ms

Pan

elC

onn

ect

Description

Features� 13.56 MHz high frequency RFID solution� Wireless connectivity for streamlined dataflow� Rugged for commercial and industrial environments� IP65 rated – protects against dust and rain� Touch screen� 45- or 52-key models� Stylus and stylus holder� Compatible with all Allen-Bradley RFID tags� Rechargeable battery


SpecificationsOperating System Microsoft® Windows® CE .NET 5.0

Processor Intel® PXA270 XScale® Technology Processor –624MHz

Memory 512MB FLASH built-in128MB SDRAM

Mass Storage Type 2 Compact FLASH Card user accessible

Interface

One RS-232 Serial PortUSB (Host and Client)Internal Wireless LAN 802.11b/gInternal Bluetooth®

Battery Nickel Metal Hydride Extended CapacityRechargeable battery 2500 mAh, 7.2V

Recharge/Line Power 11…18V DC, 1.5 A

Operating Time 9 hr (typical)

Storage Temperature � -20…+70 °C (-4…+158 °F)


Charging Temperature�

0…40 °C (32…104 °F)

Humidity ‡ 5…95%


Weight With battery: 32.3 oz (915 g)Without battery: 23 oz (652 g)

Certifications

FCC Class AEN55022, 1998. (CISPR 22) Class A,EN55022/IEC 6100-4-6 RF CONTINUOUSCONDUCTED EN55024, 1998 – ETSI EN 301489-1,2002 – ETSI EN 301 489-3,2002 – EN/IEC61000-4-2 ESD – EN/IEC 61000-4-3 RFELECTROMAGNETIC FIELD – EN/IEC 61000-4-4FAST TRANSIENTSRoHS Compliant

� No batteries installed.� Fast charge will not start below 0 °C (32 °F).‡ No condensation.

The Allen-Bradley RFID ICODE handheld interface maximizes bothmobility and performance for high frequency 13.56 MHz RFIDapplications. Each handheld interface comes with multipleconnectivity methods, such as wireless, Bluetooth, and USB. TheRFID handheld interface is IP65 rated for harsh industrial andoutdoor environments.

With its portability and ability to read, write, and save RFID tags, theRFID ICODE handheld interface is the ideal accessory for systemsetup, field service, fleet management, time and attendance, andany other situation where tags cannot be easily read by a stationarytransceiver.

New

RFID

Handheld Interfaces




General

Quick S

election

Introd

uction

Co

nnection S

ystems

PanelC

onnect

Product Selection

Accessories


Single position charging cradle with domestic power supply cable, USB cable, stylus 57RF-HH-56US1

Domestic wall mount power supply, serial cable, USB cable, stylus 57RF-HH-56US2

Power supply kit (includes power supply, adapters for USA, European, Australian, UK, and rest of world), serial cable, USB cable, stylus 57RF-HH-56IN

Battery pack (rechargeable) 57RF-HH-56BAT

Serial cable (15 ft, straight, 9-pin female connector, RS-232, molded) 57RF-HH-56CA

Industrial Compact Flash 64 MB Memory Card 1784-CF64

Industrial Compact Flash 128 MB Memory Card 1784-CF128


120.65 (4.75)

71.63 (2.82)Screen

53.59 (2.11)Screen

249.94 (9.84)

46.48(1.83)

77.98 (3.07)

96.01 (3.78)

Front View Side View

36.32(1.43)39.62(1.56)


RFID ICODE handheld interface, 52-key directional pad 57RF-HH-56A

RFID ICODE handheld interface, 45-key pad 57RF-HH-56B

New

rfid c116 sensors catalog · 2014-09-10 · when tag misalignment occurs. if your tag will be...

Documents