rf test report - tele.soumu.go.jp
TRANSCRIPT
RF TEST REPORT Report No.: Q191127S004-Telec-R1 -V1
Supersede Report No.: N/A
Applicant Artec Co.,Ltd.
Product Name 防犯見守りカメラ
Model No. 008657
Serial No. N/A
Test Standard ARIB STD T-66 Ver.3.7(Article 2 Paragraph 1 Item 19)
Test Date Nov. 28 to Dec. 09, 2019
Issue Date Dec. 10, 2019
Test Result Pass Fail
Equipment complied with the specification
Equipment did not comply with the specification
Aaron Liang
Test Engineer
David Huang
Checked By
This test report may be reproduced in full only
Test result presented in this test report is applicable to the tested sample only
Issued by:
SIEMIC (SHENZHEN-CHINA) LABORATORIES
Zone A, Floor 1, Building 2 Wan Ye Long Technology Park
South Side of Zhoushi Road, Bao’an District, Shenzhen, Guangdong China 518108
Phone: +86 0755 2601 4629801 Email: [email protected]
Test Report No. Q191127S004-Telec-R1 – V1
Page 2 of 61
Laboratories Introduction
SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one
of the leading independent testing and certification facilities providing customers with one-stop
shop services for Compliance Testing and Global Certifications.
In addition to testing and certification, SIEMIC provides initial design reviews and compliance
management throughout a project. Our extensive experience with China, Asia Pacific, North
America, European, and International compliance requirements, assures the fastest, most cost
effective way to attain regulatory compliance for the global markets.
Accreditations for Conformity Assessment
Country/Region Scope
USA EMC, RF/Wireless, SAR, Telecom
Canada EMC, RF/Wireless, SAR, Telecom
Taiwan EMC, RF, Telecom, SAR, Safety
Hong Kong RF/Wireless, SAR, Telecom
Australia EMC, RF, Telecom, SAR, Safety
Korea EMI, EMS, RF, SAR, Telecom, Safety
Japan EMI, RF/Wireless, SAR, Telecom
Singapore EMC, RF, SAR, Telecom
Europe EMC, RF, SAR, Telecom, Safety
Test Report No. Q191127S004-Telec-R1 – V1
Page 3 of 61
This page has been left blank intentionally.
Test Report No. Q191127S004-Telec-R1 – V1
Page 4 of 61
CONTENTS
1. REPORT REVISION HISTORY ........................................................................................................... 5
2. CUSTOMER INFORMATION .............................................................................................................. 5
3. TEST SITE INFORMATION ................................................................................................................. 5
4. EQUIPMENT UNDER TEST (EUT) INFORMATION ........................................................................... 6
5. TEST SUMMARY ................................................................................................................................ 7
6. MEASUREMENTS, EXAMINATION AND DERIVED RESULTS ......................................................... 8
6.1 FREQUENCY ERROR .............................................................................................................................. 8
6.2 OCCUPIED BANDWIDTH ....................................................................................................................... 11
6.3 SPREAD SPECTRUM BANDWIDTH ...................................................................................................... 16
6.4 SPURIOUS EMISSION INTENSITY ........................................................................................................ 21
6.5 ANTENNA POWER ................................................................................................................................. 39
6.6 SECONDARY RADIATED EMISSIONS .................................................................................................. 49
6.7 CARRIER SENSING FUNCTION ............................................................................................................ 56
ANNEX A. TEST INSTRUMENT .................................................................................................................. 58
ANNEX B. USER MANUAL / BLOCK DIAGRAM / SCHEMATICS / PARTLIST ............................................ 60
ANNEX C. DECLARATION OF SIMILARITY ................................................................................................ 61
Test Report No. Q191127S004-Telec-R1 – V1
Page 5 of 61
1. Report Revision History
Report No. Report Version Description Issue Date
Q191127S004-Telec-R1 NONE Original Dec. 10, 2019
Q191127S004-Telec- R1-V1 V1 Update manufacturer name Mar. 02, 2020
2. Customer information
Applicant Name Artec Co.,Ltd.
Applicant Add 2-21 Kitakamei-cho3-chome,Yao-shi,Osaka,Japan postal code:5810066
Manufacturer Tyjoon Electronics Co.,Ltd
Manufacturer Add floor 7,Build 7,Longbi Industrial area, Bantian, Longgang, Shenzhen
3. Test site information
Lab performing tests SIEMIC (Shenzhen-China) LABORATORIES
Lab Address
Zone A, Floor 1, Building 2 Wan Ye Long Technology Park
South Side of Zhoushi Road, Bao’an District, Shenzhen, Guangdong China
518108
FCC Test Site No. 535293
IC Test Site No. 4842E-1
Test Software Radiated Emission Program to Shenzhen v2.0
Test Report No. Q191127S004-Telec-R1 – V1
Page 6 of 61
4. Equipment under Test (EUT) Information
Description of EUT: 防犯見守りカメラ
Main Model: 008657
Serial Model: N/A
Date EUT received: Nov. 27, 2019
Test Date(s): Nov. 28 to Dec. 09, 2019
Antenna Gain: 2.5dBi
Antenna Type: External Antenna
Type of Modulation: 802.11b/g/n: DSSS, OFDM
RF Operating Frequency (ies): WIFI:802.11b/g/n(20M): 2412-2472 MHz(TX/RX);
802.11n (40M):2422-2462(TX/RX)
Max. Output Power: 4.086 mW/MHz
Number of Channels: WIFI :802.11b/g/n(20M): 13CH
802.11n(40M):9CH
Port: Please refer to the user’s manual
Input Power:
Adapter :
Model: RXZ--0515
Input: AC100-240V~50/60Hz,.0.3A max
Output: DC 5.0V, 1500mA
Trade Name : N/A
Test Report No. Q191127S004-Telec-R1 – V1
Page 7 of 61
5. Test Summary
The product was tested in accordance with the following specifications.
All testing has been performed according to below product classification:
Test standard Description of Test Result
Article 2-1 Item 19 Frequency Error Compliance
Article 2-1 Item 19 Occupied Bandwidth Compliance
Article 2-1 Item 19 Spread Spectrum Bandwidth Compliance
Article 2-1 Item 19 Spurious Emission Intensity(Tx) Compliance
Article 2-1 Item 19 Antenna Burst Power Compliance
Article 2-1 Item 19 Secondary Radiated Emissions(Rx) Compliance
Article 2-1 Item 19 Carrier Sensing Function Compliance
Measurement Uncertainty
Emissions
Test Item Description Uncertainty
Band Edge and Radiated
Spurious Emissions
Confidence level of approximately 95% (in the case
where distributions are normal), with a coverage
factor of 2 (for EUTs < 0.5m X 0.5m X 0.5m)
+5.6dB/-4.5dB
Note: Normal Voltage: 5V;
High Voltage: 5.5V;
Low Voltage: 4.5V;
Test Report No. Q191127S004-Telec-R1 – V1
Page 8 of 61
6. Measurements, Examination And Derived Results
6.1 Frequency Error
Temperature 22℃
Relative Humidity 29%
Atmospheric Pressure 1011mbar
Test date : Dec. 09, 2019
Tested By : Aaron Liang
Requirement(s):
Spec Item Requirement Applicable
Article 2
Paragraph 1 19 Tolerance of frequency: 50ppm or less
Test Setup
Test Procedure
Spectrum Analyzer conditions
Frequency Test Frequency
Span 1MHz
RBW 10 kHz
VBW 10 kHz
Sweep Time Auto
Detector mode Positive peak
Indication mode Max hold
Test conditions
(1) Frequency Counter or Spectrum Analyzer is used for measurement
EUT conditions
(1) Modulation/Spread/Hopping OFF, CW Tx
If EUT does not accept “Modulation OFF” mode in the measurement, you may
use “Modulation ON” mode. In that case you can use the center frequency of
characteristic spectrum, such as dip for OFDM modulation, peak for
Test Report No. Q191127S004-Telec-R1 – V1
Page 9 of 61
periodic modulation DATA, for the measured frequency value.
Remark
Result Pass Fail
Test Data Yes N/A
Test Plot Yes (See below) N/A
Test result:
802.11b / 802.11g / 802.11n (HT20):
Channel
Frequency Normal Voltage High Voltage Low Voltage
(MHz)
Carrier
frequency
(MHz)
Frequency
tolerance
(ppm)
Carrier
frequency
(MHz)
Frequency
tolerance
(ppm)
Carrier
frequency
(MHz)
Frequency
tolerance
(ppm)
1 2412 2412.02932 12.156 2412.02701 11.198 2412.02621 10.867
7 2442 2441.98794 -4.939 2441.98762 -5.07 2441.98547 -5.95
13 2472 2472.00606 2.451 2472.00557 2.253 2472.00479 1.938
802.11n (HT40):
Channel
Frequency Normal Voltage High Voltage Low Voltage
(MHz)
Carrier
frequency
(MHz)
Frequency
tolerance
(ppm)
Carrier
frequency
(MHz)
Frequency
tolerance
(ppm)
Carrier
frequency
(MHz)
Frequency
tolerance
(ppm)
3 2422 2422.01019 4.207 2422.00565 2.333 2422.00192 0.793
7 2442 2442.01881 7.703 2442.0146 5.979 2442.01315 5.385
11 2462 2462.02319 9.419 2462.02066 8.392 2462.01568 6.369
Frequency tolerance = (Carrier frequency-Frequency)/ Frequency*1000000
Test Report No. Q191127S004-Telec-R1 – V1
Page 10 of 61
Normal Voltage:
Test Plots:
802.11b / 802.11g / 802.11n20- Low Channel 802.11b / 802.11g / 802.11n20-Middle Channel
802.11b / 802.11g / 802.11n20-High Channel 802.11n40- Low Channel
802.11n40-Middle Channel 802.11n40-High Channel
Test Report No. Q191127S004-Telec-R1 – V1
Page 11 of 61
6.2 Occupied Bandwidth
Temperature 22℃
Relative Humidity 29%
Atmospheric Pressure 1011mbar
Test date : Dec. 09, 2019
Tested By : Aaron Liang
Requirement(s):
Spec Item Requirement Applicable
Article 2
Paragraph 1 19
ITEM LIMIT REMARK
Occupied
bandwidth <26MHz
For 802.11b, g &
802.11n (HT20)
Occupied
bandwidth <38MHz For 802.11n (HT40)
Occupied
bandwidth <26MHz For BT-LE (GFSK)
Test Setup
Test
Procedure
Spectrum Analyzer conditions
Frequency: 2441MHz
(FHSS),
Test Frequency (DSSS, OFDM)
Span 120MHz (FHSS), 40MHz (DSSS), 40MHz (OFDM)
RBW 1MHz 300kHz 300kHz
VBW 1MHz 300 kHz 300 kHz
Sweep Time Auto
Detector mode Positive peak
Indication mode Max hold
OBW 99%
EUT conditions
(1)Hopping on, PN9 Modulation Tx
For equipment using diffusion code, set to the test diffusion code and modulate
Test Report No. Q191127S004-Telec-R1 – V1
Page 12 of 61
with standard coding test signal.
OBW must be tested at each antenna connectors.
The lagerst value must be recorded.
If each value is larger than limit - 100kHz, total value must be tested with combiner.
Limit 38MHz : more than 37.9MHz
26MHz : more than 25.9MH
Remark
Result Pass Fail
Test Data Yes N/A
Test Plot Yes (See below) N/A
Test results:
Normal Voltage:
Test Mode Frequency
Range (MHz)
99% Occupied Bandwidth
(MHz)
802.11b
2412 13.452
2442 13.465
2472 13.467
802.11g
2412 16.715
2442 16.801
2472 16.842
802.11n20
2412 17.785
2442 17.931
2472 17.887
802.11n40
2422 36.206
2442 36.176
2462 36.182
Test Report No. Q191127S004-Telec-R1 – V1
Page 13 of 61
High Voltage:
Test Mode Frequency
Range (MHz)
99% Occupied Bandwidth
(MHz)
802.11b
2412 13.447
2442 13.46
2472 13.458
802.11g
2412 16.708
2442 16.799
2472 16.84
802.11n20
2412 17.785
2442 17.927
2472 17.877
802.11n40
2422 36.206
2442 36.169
2462 36.181
Low Voltage:
Test Mode Frequency
Range (MHz)
99% Occupied Bandwidth
(MHz)
802.11b
2412 13.449
2442 13.464
2472 13.467
802.11g
2412 16.705
2442 16.793
2472 16.839
802.11n20
2412 17.778
2442 17.926
2472 17.882
802.11n40
2422 36.206
2442 36.176
2462 36.175
Test Report No. Q191127S004-Telec-R1 – V1
Page 14 of 61
Test Plots
Normal Voltage:
802.11b-Low Channel 802.11b -Middle Channel
802.11b-High Channel 802.11g-Low Channel
802.11g -Middle Channel 802.11g-High Channel
Test Report No. Q191127S004-Telec-R1 – V1
Page 15 of 61
802.11n20-Low Channel 802.11n20 -Middle Channel
802.11n20-High Channel 802.11n40-Low Channel
802.11n40 -Middle Channel 802.11n40-High Channel
Test Report No. Q191127S004-Telec-R1 – V1
Page 16 of 61
6.3 Spread Spectrum Bandwidth
Temperature 22℃
Relative Humidity 29%
Atmospheric Pressure 1011mbar
Test date : Dec. 09, 2019
Tested By : Aaron Liang
Requirement(s):
Spec Item Requirement Applicable
Article 2
Paragraph 1 19
500kHz or more
Test Setup
Test
Procedure
Spectrum Analyzer conditions
Frequency: 2441MHz
(FHSS),
Test Frequency (DSSS, OFDM)
Span 120MHz (FHSS), 40MHz (DSSS), 40MHz (OFDM)
RBW 1MHz 300kHz 300kHz
VBW 1MHz 300 kHz 300 kHz
Sweep Time Auto
Detector mode Positive peak
Indication mode Max hold
OBW 90%
EUT conditions
(1)Hopping on, PN9 Modulation Tx
For equipment using diffusion code, set to the test diffusion code and modulate
with standard coding test signal.
Remark
Result Pass Fail
Test Report No. Q191127S004-Telec-R1 – V1
Page 17 of 61
Test Data Yes N/A
Test Plot Yes (See below) N/A
Test results:
Normal Voltage:
Test Mode Frequency
Range (MHz)
90% Occupied Bandwidth
(MHz)
802.11b
2412 8.7830
2442 8.7910
2472 8.7687
802.11g
2412 14.83
2442 14.973
2472 14.873
802.11n20
2412 15.795
2442 15.722
2472 15.768
802.11n40
2422 32.715
2442 32.827
2462 32.627
Test Report No. Q191127S004-Telec-R1 – V1
Page 18 of 61
High Voltage:
Test Mode Frequency
Range (MHz)
90% Occupied Bandwidth
(MHz)
802.11b
2412 8.7817
2442 8.7892
2472 8.7646
802.11g
2412 14.826
2442 14.964
2472 14.868
802.11n20
2412 15.785
2442 15.716
2472 15.761
802.11n40
2422 32.710
2442 32.823
2462 32.626
Low Voltage:
Test Mode Frequency
Range (MHz)
90% Occupied Bandwidth
(MHz)
802.11b
2412 8.7822
2442 8.7903
2472 8.7616
802.11g
2412 14.829
2442 14.963
2472 14.863
802.11n20
2412 15.788
2442 15.717
2472 15.766
802.11n40
2422 32.713
2442 32.820
2462 32.620
Test Report No. Q191127S004-Telec-R1 – V1
Page 19 of 61
Test Plots:
Normal Voltage:
802.11b-Low Channel 802.11b -Middle Channel
802.11b-High Channel 802.11g-Low Channel
802.11g -Middle Channel 802.11g-High Channel
Test Report No. Q191127S004-Telec-R1 – V1
Page 20 of 61
802.11n20-Low Channel 802.11n20 -Middle Channel
802.11n20-High Channel 802.11n40-Low Channel
802.11n40 -Middle Channel 802.11n40 - High Channel
Test Report No. Q191127S004-Telec-R1 – V1
Page 21 of 61
6.4 Spurious Emission Intensity
Temperature 22℃
Relative Humidity 29%
Atmospheric Pressure 1011mbar
Test date : Dec. 09, 2019
Tested By : Aaron Liang
Requirement(s):
Spec Item Requirement Applicable
Article 2
Paragraph 1 19
Tolerance of spurious emission intensity:
(1) Below 2387 MHz : 2.5μ W/MHz or less
(2) 2387 to 2400 MHz : 25μ W/MHz or less
(3) 2483.5 through 2496.5 MHz : 25μ W/MHz or less
(4) Over 2496.5 MHz : 2.5μ W/MHz or less
Test Setup
Test Report No. Q191127S004-Telec-R1 – V1
Page 22 of 61
Test
Procedure
Spectrum Analyzer conditions (Step 1)
Wide Range
Frequency 30MHz – 2374MHz , 2509.5MHz – 13GHz (FH or FH+DS,
FH+OFDM)
30MHz – 2400MHz , 2483.5MHz – 13GHz (Othe
RBW 1000kHz (30 – 1GHz) , 1000KHz (over 1GHz)
VBW 1000kHz (30 – 1GHz) , 1000KHz (over 1GHz)
Sweep Time Auto
Detector mode Positive peak
Indication mode Max hold
Hopping on, PN9 Modulation Tx
For equipment using diffusion code, set to the test diffusion code and modulate with
standard coding test signa
All spurious are measured from 30MHz to 13GHz by peak mode.
Measure on Wide Range and Outband (near the band) with different SA setting.
#Outband is for FH, FH+DS, FH+OFDM. In other case, measure only Wide Range.
If the value measured by Step1 is bigger than (limit -3dB), measure in burst average mode.
Outband (FH or FH+DS, FH+OFDM)
In case of FH, FH+DS, FH+OFDM, measure both of Wide range and Outband.
Frequency 2374MHz – 2400MHz , 2483.5MHz –
2509.5MHz
RBW 30kHz
VBW 30kHz
Compensate for RBW 15.2dB
Sweep Time Auto
Detector mode Positive peak
Indication mode Max hold
# Compensate 15.2dB is for Exchange rate of RBW
Exchange rate of RBW = 10 x Log ( Reference bandwidth / RBW at measurement ) = 15.2
[dB]
where Reference bandwidth = 1 MHz
RBW at measurement = 30 kHz
Spectrum Analyzer conditions (Step2)
Frequency: Spurious Frequency
Span 0Hz
RBW 1MHz
VBW 1MHz
Sweep Time Auto
Detector mode Sample
Test Report No. Q191127S004-Telec-R1 – V1
Page 23 of 61
In case that EUT has plural transmitters:
Spurious must be tested at each antenna connector.
(1) Wide range
The Value is sum of each antenna connector.
(2) Outband
The Value is both sum of each antenna connector and total value using conbiner.
*coupling attenuation between antennas
As the sample of above diagram, coupling value between ANT1 and ANT2 is the difference
(12dB) between the
input level at ANT1(0dBm) and the output level at ANT2(-12dBm) terminated ANT3, ANT4
and the terminal for
spectrum analyzer.
Remark
Result Pass Fail
Test Data Yes N/A
Test Plot Yes (See below) N/A
Test Report No. Q191127S004-Telec-R1 – V1
Page 24 of 61
Test Result:
Normal Voltage:
Test Mode
Frequency
Range Reading Reading Reading Limits
(MHz) Low
Frequency
Middle
Frequency
High
Frequency (dBm)
802.11b
30-1000 -69.217 -69.304 -69.158 -36dBm
1000-2387 -49.267 -51.665 -50.411 -26dBm
2387-2400 -37.018 -49.072 -49.319 -16dBm
2483.5-2496.5 -47.086 -49.133 -35.815 -16dBm
2496.5-13000 -47.989 -48.119 -48.485 -26dBm
802.11g
30-1000 -69.753 -69.181 -69.141 -36dBm
1000-2387 -40.752 -50.939 -49.014 -26dBm
2387-2400 -20.528 -42.829 -47.03 -16dBm
2483.5-2496.5 -46.071 -39.696 -16.789 -16dBm
2496.5-13000 -48.524 -45.912 -43.353 -26dBm
802.11n20
30-1000 -69.364 -68.861 -69.367 -36dBm
1000-2387 -43.819 -51.065 -49.651 -26dBm
2387-2400 -18.259 -43.992 -47.405 -16dBm
2483.5-2496.5 -44.371 -42.721 -15.683 -16dBm
2496.5-13000 -47.801 -48.826 -36.639 -26dBm
802.11n40
30-1000 -67.526 -69.193 -69.423 -36dBm
1000-2387 -34.714 -48.741 -49.243 -26dBm
2387-2400 -22.008 -32.247 -43.416 -16dBm
2483.5-2496.5 -39.921 -32.544 -19.671 -16dBm
2496.5-13000 -48.219 -40.336 -32.553 -26dBm
NOTE:The limit 2.5uW/MHz(26dBm/MHz) of frequency 30MHz to 1000MHz after conversion is
0.25uW/100kHz(36dBm/kHz).
Test Report No. Q191127S004-Telec-R1 – V1
Page 25 of 61
Low Voltage:
Test Mode
Frequency
Range Reading Reading Reading Limits
(MHz) Low
Frequency
Middle
Frequency
High
Frequency (dBm)
802.11b
30-1000 -69.264 -69.341 -69.225 -36dBm
1000-2387 -49.307 -51.699 -50.455 -26dBm
2387-2400 -37.041 -49.121 -49.407 -16dBm
2483.5-2496.5 -47.113 -49.188 -35.865 -16dBm
2496.5-13000 -48.055 -48.216 -48.569 -26dBm
802.11g
30-1000 -69.847 -69.279 -69.193 -36dBm
1000-2387 -40.814 -51.022 -49.09 -26dBm
2387-2400 -20.555 -42.882 -47.115 -16dBm
2483.5-2496.5 -46.148 -39.785 -16.885 -16dBm
2496.5-13000 -48.557 -45.981 -43.425 -26dBm
802.11n20
30-1000 -69.428 -68.912 -69.414 -36dBm
1000-2387 -43.912 -51.141 -49.695 -26dBm
2387-2400 -18.329 -44.056 -47.468 -16dBm
2483.5-2496.5 -44.462 -42.796 -15.778 -16dBm
2496.5-13000 -47.894 -48.879 -36.738 -26dBm
802.11n40
30-1000 -67.546 -69.255 -69.499 -36dBm
1000-2387 -34.761 -48.834 -49.334 -26dBm
2387-2400 -22.067 -32.306 -43.465 -16dBm
2483.5-2496.5 -39.978 -32.571 -19.696 -16dBm
2496.5-13000 -48.319 -40.373 -32.613 -26dBm
NOTE:The limit 2.5uW/MHz(26dBm/MHz) of frequency 30MHz to 1000MHz after conversion is
0.25uW/100kHz(36dBm/kHz).
Test Report No. Q191127S004-Telec-R1 – V1
Page 26 of 61
High Voltage:
Test Mode
Frequency
Range Reading Reading Reading Limits
(MHz) Low
Frequency
Middle
Frequency
High
Frequency (dBm)
802.11b
30-1000 -69.276 -69.402 -69.219 -36dBm
1000-2387 -49.34 -51.765 -50.454 -26dBm
2387-2400 -37.082 -49.169 -49.35 -16dBm
2483.5-2496.5 -47.141 -49.181 -35.897 -16dBm
2496.5-13000 -48.084 -48.164 -48.55 -26dBm
802.11g
30-1000 -69.793 -69.23 -69.206 -36dBm
1000-2387 -40.784 -51.013 -49.051 -26dBm
2387-2400 -20.582 -42.868 -47.09 -16dBm
2483.5-2496.5 -46.107 -39.733 -16.81 -16dBm
2496.5-13000 -48.6 -45.976 -43.422 -26dBm
802.11n20
30-1000 -69.459 -68.943 -69.429 -36dBm
1000-2387 -43.894 -51.088 -49.737 -26dBm
2387-2400 -18.291 -44.082 -47.466 -16dBm
2483.5-2496.5 -44.431 -42.812 -15.736 -16dBm
2496.5-13000 -47.851 -48.883 -36.688 -26dBm
802.11n40
30-1000 -67.589 -69.29 -69.49 -36dBm
1000-2387 -34.782 -48.789 -49.288 -26dBm
2387-2400 -22.049 -32.308 -43.473 -16dBm
2483.5-2496.5 -39.967 -32.59 -19.719 -16dBm
2496.5-13000 -48.259 -40.435 -32.612 -26dBm
NOTE:The limit 2.5uW/MHz(26dBm/MHz) of frequency 30MHz to 1000MHz after conversion is
0.25uW/100kHz(36dBm/kHz).
Test Report No. Q191127S004-Telec-R1 – V1
Page 27 of 61
Test Plots
802.11b Mode;
Normal Voltage:
Low Frequency:
30MHz -1000MHz 10000MHz -2387MHz
2387MHz - 2400MHz 2483MHz - 2497MHz
2497MHz - 13GHz
Test Report No. Q191127S004-Telec-R1 – V1
Page 28 of 61
Middle Frequency
30MHz -1000MHz 10000MHz -2387MHz
2387MHz - 2400MHz 2483MHz - 2497MHz
2497MHz - 13GHz
Test Report No. Q191127S004-Telec-R1 – V1
Page 29 of 61
High Frequency
30MHz -1000MHz 10000MHz -2387MHz
2387MHz - 2400MHz 2483MHz - 2497MHz
2497MHz - 13GHz