revised 12/09 tools - the glass place · 292-10680 . . .swaptop™ 6" flat lap machine the...
TRANSCRIPT
292-10650 . . .SWAPTOP™ GLASS GRINDER
The SwapTop™ Glass Grinder is a full-size, full feature machine for all your glassgrinding, shaping, and drilling needs. It'sable to professionally handle large scaleprojects but precise enough for fine detailwork. Use the SwapTop™ Glass Grinderto grind, shape, edge finish, and drillglass, mirror, mosaics, Venetian tiles,tesserae and like materials. It also works on tile, ceramic, stone, andmarble. The SwapTop™ Glass Grinder even operates wet or dry.Features:• Large Work Surface: The 9" x 10.75" work surface provides plenty of
work space for your larger projects yet the machine only takes up a small portion of your entire work bench.
• Quick and Easy: No hassle product assembly takes only minutes.• Operation is easy and straight forward. • Use Wet or Dry: The SwapTop™ Glass Grinder works wet with
diamond bits to shape glass, tile, ceramic, stone, and other mineral based materials. Use it dry to shape wood, plastics, wood composites and similar materials.
• Converts to a Table Saw: The SwapTop™ Glass Grinder easily converts into a wet/dry table saw. The motor is encased in a cleverly designed base that allows it to operate with the motor shaft either
vertically or horizontally for a table saw. You can add the other option
whenever you want by purchasing the conversion kit. The SwapTop™
Glass Grinder does the work of several individual machines at a fraction of the cost and frees up your work space.
• Available in 115V and 240V versions:
• Two Year Full Confidence Warranty
Includes: Motor unit, base, reservoir top, reversible grid work surface,
1" (WB-9) diamond bit, ¼" (WB-8) diamond grinding bits, BitSert™ with
splash guard, allen wrench, sponges and instruction guide.
INLAND DIAMOND GRINDER BITS
292-4001 . . . .WB-1 ¾" (19mm) Standard Bit. Standard
grit is ideal for shaping all types of glass, tile,
stone, and similar materials. Fits Wizard,
Wiz, Wizling, Glastar G3, G4, G8, G12, G14
292-4119 . . . .WB-1S ¾ Speed bit. For fast grinding. Fits
same as above.292-4101 . . . .WB-1F ¾” Fine grit. Fits same as above.
292-4008 . . . .WB-8 ¼” (6mm) Standard Bit. Use for drilling
holes or grinding.Fits all grinders except
Glastar Starlet.
292-4819 . . . .WB-8SG ¼" (6mm) Diamond Bit - Speed Grit.
Ideal for removing large amounts of material and faster drilling. Black band makes it quick and easy to idenify the grit.
292-40197 . . . WB-8F ¼" (6mm) Diamond Bit - Fine Grit.
FineGrit™ grinder bits leave a clean, virtually
chip free ground edge. They work well on softer, more delicate glasses and softer stone.Orange band makes itquick and easy to idenify the grit.
292-4009 . . . .WB-9 1" Standard Bit (25mm). Larger
diameter affords faster grinding and more grinding surface.
292-40209 . . .WB-9SB 1" (25mm) SuperBond™ Bit. Metal bonding holds the diamond more secure so bits last longer!
292-40309 . . .WB-9DD 1" (25mm) DoubleDiamond BitDouble plating give you more useable diamond than standard bits without
double the cost!292-4901 . . . .WB-9F 1" (25mm) Diamond Bit - Fine Grit. The fine grit
grinder bits leave a clean, virtually chip free ground
edge. They work well on softer, more delicate glasses and softer stone. Orange band makes it quick and easy to identify the grit.
292-4919 . . . .WB-9SG 1" (25mm) Diamond Bit - Speed Grit.Ideal for removing large amounts of material. Black bandmakes it quick and easy to identify the grit.
292-40399 . . .WB-9SSG 1" (25mm) Diamond Bit SuperSpeed Grit.SuperSpeed Grit Bits quickly remove large amounts of material. Depending on the application, you may want toretouch the ground edge with a finer bit. Red band makes it quick and easy to identify the grit.
292-40496 . . .WB-9SF 1" (25mm) Diamond Bit - SuperFine Grit. SuperFine™ grinder bits have an extremely fine grit diamond that produces a very clean, chip free ground edge. These bits are an ideal choice when preservingthe integrity and smoothness of the ground edge is important. Green band makes it quick and easy to identify the grit.
292-4006 . . . .WB-6 ¼" & ¾" Bit.Combines a standard grit ¾"(19 mm) grinding head with a ¼" (6 mm) drilling/ grinding head onto a single core. Perfect for grinding and shaping all types of glass, tile, stone, and other hard materials. Drill ¼" (6 mm)holes and shape intricate details with the ¼" head end and without using a separate head.
292-40018 . . .WB-18F Fine Grit LampBit (for 9º & 18º mitre), The LampBit™ is reversible, with oneside at a 9º angle for 20 panel lamps, and the
other side at an 18º angle for 10 panel lamps.
Use the side that comes closest to your lamp.
Makes it easy to fit panel type lamps and
similar 3-dimensional projects. Get cleaner,
narrower solder lines on your panel style lamps. Fine grit
is ideal for shaping all softer glasses, mirror, and more delicate materials.
292-4018 . . . .WB-18 LampBit™ (for 9º or 18º mitre). Same as above
but with standard grit.
292-40024 . . .WB-24 ¾" (19mm) Standard Bit w/Core
Drill.Combines a standard 100 grit ¾"
(19 mm) diamond bit with a ¾"(19 mm) coredrill. Shape glass, stone, tile, and ceramic
and drill ¾" holes at the same time.
292-40193 . . .WB-1R ¾" (19mm) Ripple Bit. Produce pieces easier to foil or insert into came for
cleaner solder lines and improve the fit and final appearance of your project. Useful for
all types and degrees of textured glass, stone, and tile.Choose to grind a single surface or the top and bottom simultane-
ously. Easy to adjust for a wide range ofmaterial thicknesses.
292-40190 . . .1.0mm Jewelry Bit. Use Inland diamond jewelry bits to grind a groove around the outside of your
materials for wire wrapping of beads, buttons, cabochons and more!
1.0 mm rim grinds a groove for 20 and 22 gauge. wires.Fine Grit diamond for smooth, chip free grooves.Fits any
machine with a 5/16" motor shaft, including Inland's SwapTop machines and all Inlandglass grinders.
292-40194 . . .1.4mm Jewelry Bit. Same as above but 1.4 mm rim grinds a groove for 16 and 18 gauge. wires.
Internet: www.glassplace.com
e-mail:[email protected]
D-16 Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
Revised 12/09 TOOLS
292-4014 . . . .WB-14 5/8" (for Starlet -16mm).Replacement diamond bit for Glastar Starlet grinder.
292-40021 . . .WB-21 Starlet LampBit (9º mitre)
292-0317 . . . .WB-317 Adapter (for Drill Bits). The easy way to drill precision holes and create fine details without having to remove your ¾" or1" grinding head! Required for use with1/8" (3 mm) , ¼" (6mm), and 3/8" (10mm)drilling bits.
292-0314 . . . .WB-314 ¼" (6mm) Drilling Bit.Make ¼" (6 mm) holes.Requires WB-317 adaptor.
292-0318 . . . .WB-318 1/8" (3mm) Drilling Bit. Make 1/8" (3mm)
holes. Requires WB-317 adaptor.
292-0338 . . . .WB-338 3/8" (10mm) Drilling Bit.
Make 3/8" (10mm) holes.
Requires WB-317 adaptor.
292-50006 . . .3-STEP!™ BEVELER KIT
The 3-Step! BevelerKit™ takes the guesswork out of beveling! Our three step
process lets you modify stock size
bevels and clusters to suit your own
design needs or create custom bevels
from scratch.
Features:• Work surface easlily locks onto the Impulse™ or TwinSpin™ grinders.
• Wheels and adapter work in tandem to ensure proper bevel angle and
position.
• Rough cut (coarse) diamond bevel wheel for making the initial face on
the glass
• Super fine diamond bevel wheel for making the final bevel face on theglass
• A 5" polishing wheel, polishing compound and applicator brush for
one step polishing of the bevel face. • The replaceable polishing pad material is a breakthrough in long
running, low heat polishing material. This material runs cools on the glass which allows more pressure and longer runs on polishing without the worry of heat buildup and breakage. It stands up to wear to
an amazing degree; outlasting the synthetic felt material by two to three times.
• Drip water feed system for proper coolant flow throughout the process.
Includes: Work surface, cover, mini beveling surface, water drip
system, bevel wheel adapter, coarse wheel, fine wheel, 5" polishing
disc, polishing compound w/ brush, sponge, and user guide.
292-40800 . . .BEVEL WHEEL ADAPTER Designed for use
with the 3-Step! Beveler Kit coarse, fine, and inside cone pol-ishing wheels.Features:
Ensures that the beveling wheels stay in proper positionthrough the 3 step process, no guessing where or how muchto grind.
Adjustable so that you can precisely dial in the final bevelwidth and maintain proper position to the work surface.
FLAT LAP MACHINESFlat Lap Machines for Grinding, Shaping and Polishing.
292-20070 . . .TWINSPIN™ DISC GRINDER / GLASS GRINDER
The TwinSpin™ is a multi-use grinding andshaping machine for glass, ceramic,plastics, tile, marble, stone and othernonmetallic items.
Features:
• A complete router grinding setup including lift off reservoir, reversible grid work surface, Inland's TouchTop™ feature, 1" grinding head and ¼" drilling / grinding head.
• A complete disc grinding setup including lift off disc wheel reservoirand work surface, 5" diamond coated disc and disc cover with dripcoolant feed.
• A mini-work surface for router grinding while setup to disc grind. Itsets in place over the disc when needed and lifts away to resume discgrinding.
• Two MitreMaker™ bars that snap into the disc work surface for grinding 90°, 45°, 22.5° and 60° miters.
• Compound Angle Bars (CAB) mount to the MitreMaker™ for grinding compound angles like those found on lamp shade crowns.
• The TouchTop™ feature provides on demand grinding and extends
motor life. The grinder turns on when you touch the work surface and
off when released. The sensitivity is adjustable to suit your grindingstyle.
• Additional FineGrit™ and SuperFine™ Grit discs are available for
grinding softer materials, making smooth frosted edges, and produc
ing decorative details.
• Use the TwinSpin™ with the optional 3-Step! BevelerKit™ and you
have a mini-beveling machine for grinding and polishing beveled
edges on glass. • Five Year Full Confidence Warranty
292-50005 . . .TWINSPIN™ RETROFIT KIT
Reconfigure your Wizard IV™,
Impulse™ , or WizCG™ into
a fast and powerful TwinSpin™disc grinder and use to straight
edge grind, bevel, thin, miter
and create compound angles.
You can also grind with amaz-
ing speed using the outer edgeof the 5" disc.
Features:
• A full size work surface with large coolant system. • A mini-work surface for router grinding while setup to disc grind. It
sets in place over the disc when needed and lifts away to resume disc
grinding. • Two MitreMaker™ bars that snap into the disc work surface for grind
ing 90°, 45°, 22.5° and 60° miters. • Two Compound Angle Bars (CAB) mount to the MiterMakers™ for
grinding compound angles like those found on lamp shade crowns. • Additional FineGrit™ and SuperFine™ Grit discs are available for
grinding softer materials, making smooth frosted edges, and producing decorative details.
• Easy to set up.
• Can also be used on earlier model Wizard grinders.
Includes: Full size work surface, water drip coolant system, 5" standard grit diamond disc, mini work surface for standard bits, 90º /45º and 22.5º / 30º MitreMaker Bars, 2 compound angle bars, instructions.
Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
D-17 Internet: www.glassplace.com
e-mail: [email protected]
TOOLS Revised 12/09
292-10680 . . .SWAPTOP™ 6" FLAT LAP MACHINE
The SwapTop™ 6" Flat Lap is the mostaffordable full-featured flat lapglass polishing set up on themarket. Its water cooled systemmeans no messy oil to clean up.Faster RPM motor allows you toquickly polish and finish. Because
of its unique low profile design, theSwapTop can be taken anywhere,but it will still pass muster on the workbench at home.
Features:
• Use For Glass and a Range of Glass Projects: The SwapTop™ FlatLap can be used to shape and polish a range of glass projects. Use it
to shape and finish flame worked beads, hot glass projects, kiln
worked projects and fused glass pieces. • Quiet and Powerful: The direct drive Permanent Magnet DC motor is
stronger than other machines you will find for two or three times the
price. Comes complete with speed controller. • 6" Diamond Disks: Includes (4) diamond disks, 2 master laps plus a
polishing pad - (1) 170 Grit 6" Flat Lap,(1) 325 Grit 6" Flat Lap, (1) 600
Grit 6" Flat Lap, (1) 1200 Grit 6" Flat Lap. • Quick and Easy: No hassle product assembly, operation is easy and
straight forward, and diamond disk changes take less than a minute. • Converts to a Table Saw or Glass Grinder: The SwapTop 6" Flat Lap
easily converts into a wet/dry table saw and a conventional glass
grinder. The motor is encased in a cleverly designed base that allows
it to operate with the motor shaft either vertically or horizontally. And
you can add the other options whenever you want by purchasing theconversion kit. Do the work of several individual machines at a fractionof the cost and free up your work space.
• Available in 115V and 240V• Two Year Full Confidence Warranty
Includes: Motor unit, base, grinder work surface, (4) 6" diamond laps,
polishing pad, Polishing Powder & Brush, Water Drip System, splash-
guard, Master Lap & arbor, and instruction guide.
292-10685 . . .SWAPTOP™ 6" FLAT LAP CONVERSION KIT
Convert your existing Swap-
Top™ Table Saw or Shaper /
Grinder into a 6" Flat Lap
machine for glass shaping and
polishing! Have more tools,
work better in same space with-
out the cost of buying an entirenew machine!
Features:
• Use For Glass and a Range of Glass Projects: The SwapTop™ Flat Lap can be used to shape and polish a range of glass projects. Use itto shape and finish flame worked beads, hot glass projects, kiln
worked projects and fused glass pieces. • 6" Diamond Disks : Includes (4) diamond disks plus master lap,
polishing pad and compound, everything you need to start shapingand polishing - (1) 170 Grit 6" Flat Lap, (1) 325 Grit 6" Flat Lap, (1) 600 Grit 6" Flat Lap, (1) 1200 Grit 6" Flat Lap.
• Use with 6" or 8" Laps: The redesigned work surface allows you to
use both 6” and 8” laps on the same machine. • Quick and Easy: No hassle product assembly, operation is easy and
straight forward, and diamond disk changes take less than a minute.
Includes: Includes: 10" x 11" reservoir with open grid work surface,brass arbor, splashguard, (4) 6" diamond laps, Polishing Pad, MasterLap, Water Drip System, allen wrenches, arbor wrench, and instruction
guide.Requirements: SwapTop Came Saw, SwapTop Tile Saw, or theSwapTop Grinder & Router/Shaper.
292-10880 . . .SWAPTOP™ 8" FLAT LAP MACHINE
The SwapTop™ 8" Flat Lap is the mostaffordable full-featured flat lapglass polishing set up on the mar-ket. With 75% more diamond sur-face than the 6” Flat Lap Machine,the new 8” version is a glass work-
er’s dream come true.
Features:
• Versatile: The work surface and splash guard have beentotally redesigned to allow access to the outermost edge of the diskswhich facilitates grinding and polishing of the largest possible pieces.
• The redesigned work surface will accept both 6” and 8” laps. • Use For a Range of Glass Projects: The SwapTop™ Flat Lap can be
used to shape and polish a range of glass projects. Use it to shape and finish flame worked beads, hot glass projects, kiln worked projectsand fused glass pieces.
• Quiet and Powerful: The direct drive Permanent Magnet DC motor is stronger than other machines you will find for two or three times theprice. Comes complete with speed controller.
• 8" Diamond Disks: Includes (4) diamond disks - (1) 170 Grit 8" Flat Lap, (1) 325 Grit 8" Flat Lap, (1) 600 Grit 8" Flat Lap, (1) 1200 Grit 8" Flat Lap, 2 master laps plus a polishing pad.
• Quick and Easy: No hassle product assembly, operation is easy and straight forward, and diamond disk changes take less than a minute.
• Converts to a Table Saw or Glass Grinder: The SwapTop 8" Flat Lap
easily converts into a wet/dry table saw and a conventional glass
grinder. The motor is encased in a cleverly designed base that allows
it to operate with the motor shaft either vertically or horizontally. And
you can add the other options whenever you want by purchasing the
conversion kit. Do the work of several individual machines at a fraction
of the cost and free up your work space.
• Available in 115V and 240V • Two Year Full Confidence Warranty
Includes: Motor unit, base, grinder work surface with open grid work
surface, (4) 8" diamond laps, polishing pad, Polishing Powder & Brush,
Water Drip System, splashguard, 2 Master Laps & arbor, and instruc-
tion guide.
292-10885 . . .SWAPTOP™ 8" FLAT LAP CONVERSION. KIT
Convert your existing Swap-
Top™ Table Saw or Shaper /
Grinder into a 8" Flat Lap
machine for glass shaping and
polishing! Have more tools,work better in same space
without the cost of buying anentire new machine!
Features:
• Use For Glass and a Range of Glass Projects: The SwapTop™ Flat Lap can be used to shape and polish a range of glass projects. Use itto shape and finish flame worked beads, hot glass projects, kiln
worked projects and fused glass pieces. • 8" Diamond Disks : Includes (4) diamond disks - (1) 170 Grit 6" Flat
Lap, (1) 325 Grit 6" Flat Lap(1) 600 Grit 6" Flat Lap, (1) 1200 Grit 6" Flat Lap - plus master lap, polishing pad and compound - everything you need to start shaping and polishing.
• Use with 6" or 8" Laps: The redesigned work surface allows you to
use both 6” and 8” laps on the same machine. • Quick and Easy: No hassle product assembly, operation is easy and
straight forward, and diamond disk changes take less than a minute.
Specifications:Includes: 10" x 11" reservoir with open grid work surface, brass arbor,splashguard, (4) 8" diamond laps, Polishing Pad, Master Lap, Water
Drip System, allen wrenches, arbor wrench, and instruction guide.
Requirements: SwapTop Came Saw, SwapTop Tile Saw, or the Swap-
Top Grinder & Router/Shaper.
Internet: www.glassplace.com
e-mail:[email protected]
D-18 Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
Revised 12/09 TOOLS
292-50019 . . .FLEXSHAFT™ FLEXIBLE SHAFT TOOL The FlexShaft™ turns your SwapTop™ motor orgrinder with a 5/16" motor shaft into a handheld engraving, drilling, and shaping tool.
Features:• The FlexShaft™ accessory fits
onto all motors with a 5/16" diameter shaft, like the Inland Wizard IV, Impulse, WizCG, and others.
• Simply plug it on and it's ready to go.• The FlexShaft™ works with nearly any 1/32" to 1/8" shaft tool or bit • Use it to engrave, polish, sand, drill, and create intricate detailing in
many materials. • Use with our Diamond Tip Sets to engrave and shape glass, stone,
marble, tile, and other mineral based materials. • The drill style chuck is easy to use.
292-50002 . . .SUPERJET™ COOLING SYSTEM
The patented SuperJet™ Cooling Systemautomatically pumps coolant to the bit surface for optimal lubrication whengrinding and drilling to increase bitlife and performance.
Features:
• Easy to install. and works on all
Inland grinders and most other
models.
• Automatically pulls coolant to the bitsurface.
• Increases grinding speed
• Reduces bit wear, making them last longer.
• Includes a large work surface for use with ¾" bits, a smaller work
surface for drilling and smaller grinding bits and a freehand surface
for ¾" bits.
• Switching between work surfaces takes just seconds. • The small bit work surface makes drilling holes easier, accurate and
more efficient. It eliminates the need for a hand held sponge, giving
you more control.
• The freehand surface gives you greater control and range of
movement when grinding intricate and odd shape pieces. Use to back
bevel, quickly spot grind or touch up an area.
• One Year Full Confidence Warranty
292-50081 . . . . .AERO / IMPULSE / CG / WIZARD IV WORK SURFACE
Replacement work surface for
Wizard IV, Impuse, Aero, Twin-
Spin, WizCG, Wizling CG, Con-
tour, and Contour GT grinder
model years 1994 to current.
292-50084 . . .SWAPTOP™ WORK SURFACE
Replacement work surface forSwapTop Grinder and Router /
Shaper machines.
292-50004 . . .WIZARD™ WORKSURFACE (OLD WIZARD)
Replacement Grid for Wizardand Wizard Plus Machines made
between 1981-2002.
292-5501 . . . . . .SecondStory™ Work Surface
Use the SecondStory™ work surface
with all Inland glass grinders any timeyou are grinding or drilling with astacked ¼" drilling / grinding head.
Elevating the work surface makes usingthe smaller grinding bits easier.
292-50014 . . .GRINDER STATION™
This fully adjustable and washable vinyl surround willkeep your work area clean andsafe by containing saw andshaper over spray. Set up aroundthe back and sides of your InlandGrinder, SwapTop™ Trim Saw or Shaper /Edger and keep your work area clean and safe.
292-6017 . . . .FACESHIELD™
This large 12" x 9" face shieldprovides added protectiongrinding and sawing debris.
292-5018 . . . .MAGNASHIELD™
This large 12" x 9" face shieldhas an optical quality convexmagnifying surface. It makes iteasier to see your work whilewhile providing additional protection against chips anddebris.
292-6004 . . . .30º/60º/90º COMBINATION SQUARE
An easy to use multi-purpose draft-
ing and layout tool for usewhen designing, scoring and grinding!
Features:
• Use as a layout and designing
tool for making ¾", 1", 1½",
and 2" diameter circles
• Use as a ruler, marked in 1/8" increments. • Use to square up and score glass. Also use for wood, plastic,
moldings, border came, etc.. • Use as a grinder straight edge guide. Attached to your grid work
surface and even out or create straight edged pieces.
• Use to check for square on flat and 3-D projects for more accurateand professional looking projects.
• Works equally well right or left handed.
292-60531 . . .THUMBSAVERS™
Lock onto the edge of the glass so youcan safely guide the glass against the
grinder bit and save your fingers!
Features:
• Made of strong synthetic rubber for long life.
• Safely grind even small pieces.
• Comfortable and easy to use.
TOOLS Revised 12/09
Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
D-19 Internet: www.glassplace.com
e-mail: [email protected]
292-40030 . . .GRINDER SPLASHGUARD
Plastic splashguard that inserts into holes in rearof BitSerts.
292-40036 . . . ¾" (19MM) STANDARD BITSERT
Traditional method of grinding head lubrication withInland innovation
Features:• Sponge feeds coolant from reservoir to grinding
head • Inland BitSerts are designed to keep sponge in
proper position while grinding • Keeps your diamond bits lubricated for longer life. • For use with all grits made in ¾" diamond grinding bit.
For Use With:Wizard: 1996-current Wizard IV Aero, Impulse: 1994-current
WizlingCG, WizCG: 1997-current
PopTop Wizling & Wiz: 1996-1997
292-40041 . . .1" (25MM) STANDARD BITSERT
Same as above except it is for use with all grits
made in 1" diamond grinding bit.
For Use With:
Wizard IV Wizard: 1996-2002
Impulse: 1994-current
WizCG: 1997-current
292-90104 . . .SECOND STORY "L" SPONGES
Replacement sponge for the SecondStory™work surface.
292-90102 . . .REPLACEMENT GRINDER SPONGE
Replacement sponge for all Inland standardBitSerts
5” DIAMOND DISCS - The only disc with a diamond coated outer edgefor fast grinding and shaping!
292-40501 . . .5" (12.7cm) Diamond Disc FineGrit
292-40502 . . .5" (12.7cm) DiamondDisc SuperFine Grit
292-40500 . . .5" (12.7cm) DiamondDisc Standard Grit
ELECTROPLATED DIAMOND LAPS Quality electroplated diamond laps have a 1/2" arbor hole and areintended to be mechanically clamped to a Master Lap. For use withInland SwapTop™, Flat Lap Machines or any machine using a 6" or 8"Master Lap.
Features:• Available in a comprehensive
series of grits for all your glass shaping and polishing needs: 60, 100, 170, 275, 325, 600,1200, and 3000 grit diamond.
• Use on any machine with a ½”arbor hole.
• Secured to a master lap by mechanicallyclamping them. They are not pressure sensitive backs.
6" DIAMOND FLAT LAP
292-436060 . .6" 60 Grit Diamond Flat Lap 292-436100 . .6" 100 Grit Diamond Flat Lap
292-436170 . .6" 170 Grit Diamond Flat Lap
292-436275 . .6" 275 Grit Diamond Flat Lap
292-436325 . .6" 325 Grit Diamond Flat Lap
292-436600 . .6" 600 Grit Diamond Flat Lap
292-436120 . .6" 1200 Grit Diamond Flat Lap292-436300 . .6" 3000 Grit Diamond Flat Lap
8" DIAMOND FLAT LAP
292-438060 . .8" 60 Grit Diamond Flat Lap
292-438100 . .8" 100 Grit Diamond Flat Lap
292-438170 . .8" 170 Grit Diamond Flat Lap
292-438275 . .8" 275 Grit Diamond Flat Lap 292-438325 . .8" 325 Grit Diamond Flat Lap
292-438600 . .8" 600 Grit Diamond Flat Lap
292-438120 . .8" 1200 Grit Diamond Flat Lap
292-438300 . .8" 3000 Grit Diamond Flat Lap
DIAMOND BEVEL WHEEL
Designed for use with the 3-Step! BevelerKit and Bevel Wheel Adapter
292-40815 . . .Beveler Wheel -Coarse
292-40825 . . .Beveler Wheel -Fine
292-40835 . . .Beveler Wheel -Polishing
Cone
292-40505 . . .5" (12.7cm) Polishing Disc
Use with the 3-Step! Beveler Kit,
TwinSpin, or any machine with a.312" (7.92 mm) arbor thataccepts 5" discs.
Polishing disc has replaceablesurface.
Internet: www.glassplace.com
e-mail:[email protected]
D-20 Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
Revised 12/09 TOOLS
MASTER LAP
Solid acrylic backer for smooth operation. Acrylic Master Lap can be used with anyFlat Lap Machines having a 1/2" arbor.
292-436001 . .6" Master Lap292-438001 . .8" Master Lap
FELT POLISHING PADS (3 PACK)
Natural wool felt for the best overall polishing
pad. No colour is added to the pads, so nocolour will be added to your cabs.
Features:• Hard Density (0.36g/cm) pads for longer
useful life. • Readily accepts most polishing media including cerium and tin oxides,
diamond compounds, and more. • PSA backing for easy application and stayput fit.
292-436005 . .6" Felt Polishing Pads
292-438005 . .8" Felt Polishing Pads
REPLACEMENT PADS FOR THE 5” POLISHING DISC
Self adhesive for easy replacement.
292-50007 . . .5" (12.7cm)
Replacement Pads -
2 pk
REPLACEMENT PADS FOR THE INSIDE CURVE POLISHING CONE
292-50010 . . .2.5" (6.3cm) Polishing
Pads (2 Pack)
INLAND GLASS AND CAME SAWS
The SwapTop™ Trim Saw is the
all purpose, full-size, full featuretable saw for all your tile, ceramic,
and hobby projects. It's able toprofessionally handle large scaleprojects but precise enough for
fine detail work. Imagine cutting
tile, ceramic, stone, marble, andmosaic on the same saw that canalso cut wood, wood composites,
plastics, soft metals, and more.The SwapTop™ Trim Saw does the work of several individual
machines at a fraction of the cost and frees up your work space.
292-10670 . . .SwapTop™ Diamond Trim Saw
SWAPTOP™ CAME SAW
The SwapTop™ Came Saw is the all purpose,full-size, full feature table saw for allyour stained glass, and hobbyprojects. It's able to professionallyhandle large scale projects but precise enough for fine detail work. Imagine cutting metal cames including zinc and copper, plastics,and some woods on a saw that canalso cut tile, ceramics, glass, stone, and more.The SwapTop™ Came Saw does the work of severalindividual machines at a fraction of the cost and frees up your workspace.
292-10660 . . .SwapTop™ Came Saw
SWAPTOP™ TILE SAW CONVERSION KIT
The SwapTop™ Tile Saw ConversionKit quickly and easily converts yourSwapTop™ Glass Grinder or Flat LapMachine into an accurate and powerfultable for sawing glass, tile, stone andmore.
Use Wet or Dry: The SwapTop™ Tile
Saw Conversion Kit comes with the 6½" Diamond Coated Blade to wet saw
tile, stone, glass, and other mineral
based materials. Use the optional
MetalCut™ General Purpose Blade for
dry sawing non-ferrous soft metals, plastics, and some woods or the
WoodCut™ 6½" blade for dry sawing most woods and wood
composites.
292-10675 . . .SwapTop™ Diamond Trim Saw Conversion Kit
SWAPTOP™ TABLE SAW CONVERSION KIT
The SwapTop™ Table Saw Conversion
Kit quickly and easily converts your
SwapTop™ Glass Grinder into an
accurate and powerful table saw for allyour glass and hobby needs.
292-10665 . . .SwapTop™ Came Saw
Conversion Kit
SAW BLADES
Inland carries a range of blade types andsizes to fit any sawing need!
292-40950 . . .5" (12.7cm) DiaondTuff™Diamond Blade
292-40960 . . .6½" (16.5cm) DiamondTuff™ Diamond Blade
292-90960 . . .6½" (16.5cm) CarbonTuff™ General Purpose Blade
292-90964 . . .6½" (16.5cm) CarbonTuff™ WoodCut Blade
SWAPTOP REPLACEMENT MOTOR
Replacement motor for all models ofSwapTop machine. Includes motor unit in yellow housing
complete with integrated speed controller.
292-10610 . . .SwapTop™ Motor Unit
TOOLS Revised 12/09
Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
D-21 Internet: www.glassplace.com
e-mail: [email protected]
shown here with
optional rip
fence accessory
SWAPTOP ACCESSORIES
Converts the original style SwapTop™6" Flat Lap machines for use with8" or 6" diamond flat laps.
292-10886 . . .SwapTop™ 8" FlatLap Retro Fit Kit
Ready to expand your Swap-Top machine to additional "ded-icated full time" units? Add asecond housing, and a secondmotor, and you are ready to go!Required base for all SwapTopmachines: 8" and 6" Flat LapMachines, Grinder / Shaper,GTO, Came Saw or, TIle Saw.
292-69801600 SwapTop™
Lower Housing
Brass arbor and nut for use
with SwapTop trim saw andflat lap machines.
292-436002 . .SwapTop™ ½"
Arbor / Nut set
WATERDRIP™ ADDON KIT
The WaterDrip™ AddOn Kit allows you to
feed coolant to the working area when usingdiamond coated blades or discs.
For use with any of the SwapTop™
machines, TwinSpin™ Disc Grinder, or
3-Step! BevlerKit
Easy to set up and use. Puts coolant flow control at your fingertips.
292-50008 . . .Water Drip AddOn™ Kit
SWAPTOP™ RIP FENCE
292-69801661 SwapTop™ Rip
Fence
SWAPTOP™ PROTRACTOR
Adjustable guide makes cutting angles quick and easy.
292-69801662 SwapTop™ Protractor
GEMINI WIRE RING SAWS
TAURUS 3 RING SAW
310-1003 . . . .TAURUS 3 RING SAW. A professional size ring sawthat has all the best features of a glass saw at a price that everyonecan afford. This saw is light in weight and ultra strong. Fewer movingparts provide for less maintenance.
Taurus 3 Statistics:
17¾” x 16” work surface.5 5/8” throat depth.
1½” throat height.
1/5 horse power motor.
110 volt or 220 volt (w/ internal
transformer) capacity. 1.3-1.7 amps
Blade: 5¾ inch, diamond-coated,one-piece, stainless steel
Standard .050-80 grit
Available .031-100 gritControls: on/off switch
Weight: 14 pounds
Instruction book
3 Year Warranty on motor
310-1042 . . . .STANDARD BLADE
Standard Blade - Stained glass pattern and all around multi
purpose cutting blade. Its action is omni-directional. This is to
say that it cuts the same speed and kerf, (swath left by the
blade), in any direction. This blade was the first blade to be put
on saws and makes pattern cutting very easy because the user
does not have to turn the piece while cutting but simply move it in anydirection.Blade Shape: Round .072 Diameter (note 1/16" equals .063 and 1mm
equals .0394) Grit is aggressive.Material Thickness Capacity: 3/8", normal use is 1/8" art glass,
¼" soft wall tile.What to Avoid: Do not use for ceramic tile, 3/8" fused glass pieces, or
thick material in general.
Average Blade Life: 40-60 hours
310-1043 . . . .SEPARATING BLADE
Separating Blade - This
blade is the same as abovebut it comes apart for cutting
out the center of somethingwithout using an entrance cut. You must first drill a hole. Consult yourDVD for hole drilling instructions.
Blade Shape: Round .072 Diameter (note 1/16" equals .063 and 1mm equals .0394) Grit is aggressive.
Material Thickness Capacity: 3/8", normal use is 1/8" art glass, ¼" soft wall tile.
What to Avoid: Do not use for ceramic tile, 3/8" fused glass pieces, orthick material in general.
Average Blade Life: 40-60 hours
Revised 12/09 TOOLS
Internet: www.glassplace.com
e-mail:[email protected]
D-22 Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
cross section
310-1045 . . . .MEGA BLADEThis heavy duty blade is hungry for whatever you can feedit. It is almost unbreakable so it is great for class settings.It has an opinion about which way it likes to cut because ofits shape which is basically tear dropped. The round partof the tear drop faces outward and the pointed part facesinward. This means it cuts faster when pulling towards your-
self and slower pushing away and slowest sideways. Its kerfis the same as a standard blade when pushing and pulling but it leavesa wide swath sideways. That said you can cut whatever you can fit intothe mouth of the saw and the shape allows for creative shaping. Cuttingaction is omni-directional in thin material like stained glass but more forward and backward cutting for thicker harder materials. Leaves asmooth edge.Blade Shape: Tear Drop .072 Diameter (front) x .150 (front to back),
inside is pointed. Grit is aggressive.Material Thickness Capacity: ¾", normal use is fused glass, stained
glass, ceramic tile, or stone. You may have to remove the stabilizer foot to use the full ¾" capacity.
What to Avoid: Do not cut thin dichroic glass as it will chip easily, demonstrate to students its action prior to letting them use it, explaining the tear drop shape and its uniqueaction.
Average Blade Life: 50-100 hours
310-1046 . . . .SLICER BLADE
This is the thinnest blade and only cuts forward and backward. It
can grind slightly left and right, but take your time and it will turnon a dime or smaller. Its action is just like that of a band saw but
infinitely better in that you rotate the material into the blade as
you are cutting and you can stop in the middle of the cut without
binding and head off in any direction either backwards or forwards. This
blade was developed for slicing material quickly with a thin kerf (.040,
1mm) and it is the blade we recommend for use with the Super Slicer,
(a jig for slicing pattern bars and rods into thin repeatable wafers). Also
it has finer diamond so the cut is even smoother than all the otherblades except for the dichro blade. Use this blade with the heavy duty
flocked belt to avoid splitting. This blade can turn on a dime and do very
intricate designs once you get used to it. Glass fusers love it.
Blade Shape: Flat .040 width x .150 length. Grit is fine.
Material Thickness Capacity: ¾", normal use is for slicing thin wafers
in rods and pattern bars, and scroll cutting of fused glass up to 3/8"
thickness.
Average Blade Life: 50-100 hours
310-1049 . . . .DICHROIC BLADE
NEW -This is the slim blade but coated in super fine grit so that it does
not chip even the thinnest of dichroic glass. Its cut is super quick and
leaves the smoothest edge of all of the blades.It allows the use of lowerfiring temperatures in the manufacture of jewelry and the like. Neat
crisp edges add a note of professionalism to your work. Its action isomni-directional.
Blade Shape: Oval .058 x .072 (front to back). Grit is finest.Material Thickness Capacity: ¼", normal use is thinner than normal
dichroic or iridized glass.
What to Avoid: Do not use for ceramic tile, ¼" fused glass pieces, or
thick material in general.Average Blade Life: 40-60 hours
310-1044 . . . .SLIM BLADE
Originally developed for the Taurus I thru II.2 series as athinner version of the standard blade. It has the same
dimension as a standard or separating blade front to back butis thinner as you look at it straight on. For this reason it is just
as strong as a Standard Blade but can cut quicker front to backand leave a slightly smaller kerf, (.062). It cuts the same as a standardblade left to right and its action is omni-directional.
Blade Shape: Oval .062 x .072 (front to back). Grit is aggressiveMaterial Thickness Capacity: 3/8", normal use is 1/8" art glass, ¼"
wall tile.What to Avoid: Do not use for ceramic tile, 3/8" fused glass pieces, or
thick material in general.Average Blade Life: 40-60 hours
310-1050 . . . .SPEED BLADESometimes known as the inverted Mega blade because they haveturned a mega blade inside out and made it thinner. The result is a teardropped shaped blade that is almost unbreakable with the round parton the inside and the point on the outside. Its thinner profile makes itthe fastest most aggressive blade yet. When pushing forward into thisblade it glides through the thickest toughest materials with ease. Itcomes with a "Flocked belt" only as this is the only belt that can handleits aggressive nature. Its action is omni-directional in stained glass orsoft wall tile and forward and backward for thicker or harder materials.When pushing or pulling the material through with this blade it has athinner kerf than a Standard, Mega, or Slim blade. (.055).Blade Shape: Tear Drop .055 inside x .150 (front to back). Grit is
aggressive.Material Thickness Capacity: ¾", normal use is fused glass, stained
glass, ceramic tile and stone. Note: you will have to remove the stabilizer foot to use the full ¾" capacity.
What to Avoid: Do not cut thin dichroic glass as it will chip easily. Demonstrate to students its action prior to letting themuse it, explaining the tear drop shape and its uniqueness.
Average Blade Life: 50-100 hours
PLEASE NOTE:
Taurus 3 Blade KitsAll Taurus 3 blade kits come withone blade and two orange groove grommets.
Taurus II Blade KitsAll Taurus II blade kits comewith one blade, three yellow groove grommets, four red gear grommets and two hole reducers.
310-1024 . . . .TAURUS 3 ACCESSORY KIT
T3 Accessory Kit includes:
• Tools for cutting 30/45/60º angles• 45º bevel edger for making
perfect boxes• Straight edge for cutting straight
lines• 10º Lamp wedge for perfect fitting
lamp pieces
• Circle maker for making perfect circles
• Instruction book (Video is no longer included)
310-1027 . . . .TAURUS 3 COMPLETE BLADE AND PARTS KIT.
Gemini now make it easy to order the most needed replacement partsin one kit. End down time by having the most used parts on hand. The“Complete Blade and Parts Kit” does not replace the “Blade Kit”. The
complete kit contains 1 standard blade, 1 blue pulley assembly, 2orange groove grommets & 1 drive belt.
TOOLS Revised 12/09
Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
D-23 Internet: www.glassplace.com
e-mail: [email protected]
cross
section
cross section
cross
section
GEMINI ACCESSORIES AND REPLACEMENT PARTS
310-0015 . . . .Work Surface (Taurus II.2)310-0033 . . . .Spring Tension Plate (Taurus II.2)310-0035 . . . .Drive Pulley (Taurus II.2 and T3)310-0048 . . . .TII.2 Yellow Grommets (10/pack) 310-0049 . . . .TII.2 Red Gear Grommets (10/pack)
310-0050 . . . .R2 Bearings for Red Grommets (1/pack) (Taurus II.2)310-0051 . . . .R4 Bearings (1/pack)310-0069 . . . .Water Tub (Taurus II.2)310-0070 . . . .Drive Belt (Taurus II.2 and T3)310-1025 . . . .TII.2 Complete Parts Kit310-1031 . . . .T3 Torsion Spring Assembly310-1036 . . . .T3 Blue Pulley Grommet Assembly(1/pack)310-1037 . . . .TII.2 Raceway Strips (2/set)310-0108 . . . .Flocked Drive Belt310-0261 . . . .Blade Hole Reducer Plug (Taurus II.2)310-0485 . . . .T3 Burnt Orange Groove Grommet
310-0487 . . . .T3 Hole Reducer Sheets310-0497 . . . .T3 Face Shield
310-1021 . . . .TII.2 Accessory Kit
310-1022 . . . .TII.2 Spot Light & Clear Face Shield310-1028 . . . .T3 Mega Blade Complete Kit
310-1034 . . . .T3 Stabilizer Foot310-1035 . . . .TII.2 L Bracket
310-1051 . . . .Slicer Blade/Belt Kit (T3 only)
310-1052 . . . .T3/Titan Speed Blade & Belt Kit
310-1067 . . . .T3 New Large Rail Blue Pulley Grommet Assembly
310-1070 . . . .T3 Groove Grommet Assembly
310-1009 . . . .ALL NEW TITAN TABLE SAW
The Titan cuts straight lines up to 12”
long every time. It accomplishes this by
way of a carriage tray that moves
forwards and backwards while it stays
perfectly aligned with the rigid ring
blade. Makes trimming a cinch.The Titan comes with a Megablade that
is very fast cutting and leaves an
extremely smooth edge.
Titans can expose a full 3 inches of
blade. This makes it perfect for cutting
not only pattern bars, glass tile, millifiori, stained glass, glass tubes,
rods, streamers, etc. but it also cuts bottles, vases and other tall andhollow pieces. Fantastic for hard to cut three dimensional blown glass.The Titan can also be used to cut curves both forward and backward instained glass, tile, ceramic, stone and a host of other materials.
Included with the Titan are triangles for cutting 45/90/30/60 degree
angles.Titans will fit on any table with a footprint of 12 by 18 inches.
Specifications:
Drive Motor: 1/5 Horsepower110 Volt, 50-60hz
Also available at extra charge220 volt, 50-60hz transformerwith european power cord
Weight: 15 poundsWarranty: 1 year limited
310-0073 . . . .Titan Drive Belt310-1048 . . . .Titan Mega Blade Kit310-1052 . . . .T3/Titan Speed Blade & Belt Kit
310-1075 . . . .Titan Complete Blade & Parts Kit
310-1047 . . . .THE SUPER SLICER
The Super Slicer is a devicethat gives you the ability tomake repetitive, perfectly parallel, ultra thin cuts in anymaterial that will clear thethroat height of the saw, which is 1½" on the Taurus 3 and 1" on the Taurus II.2. The Super Slicer can be adaptedfor use on other saws such asband saws as long as theblade will pass through theribs.The Super Slicer can be useful when cutting:Pattern Bars,Streamers,Milfiori and virtually any othermaterial that requiresrepetitive cutting.
The Super Slicer has the ability to cut slices as thin as 1/16".
AANRAKU “TWOFERS” GRINDER HEADS
708-1977 . . . .1” 100/120 grit regular glass grinding bits (2 bits/pkg)
708-1981 . . . .1” 170 grit medium glass grinding bits ((2 bits/pkg)
708-1982 . . . .1” 220 grit fine glass grinding bits (2 bits/pkg)708-1983 . . . .1” 600 grit ultra fine glass grinding bits (2 bits/pkg)
708-1976 . . . .¾” 100/120 grit regular grinding bits (2 bits/pkg)
708-1984 . . . .¾” 170 grit medium glass grinding bits (2 bits/pkg)708-1985 . . . .¾” 220 grit fine glass grinding bits (2 bits/pkg)
708-1986 . . . .¾” 600 grit ultra fine glass grinding bits (2 bits/pkg)
708-1975 . . . .¼” 100/120 grit regular glass grinding bits (2 bits/pkg)
708-1974 . . . .1/8” 100/120 grit regular glass grinding bits (2 bits /pkg)
708-1979 . . . .Jewelry 220 grit glass grinding bits (2 bits/pkg)
708-1978 . . . .Ripple 100/120 grit glass grinding bits (2 bits/pkg)
708-1987 . . . .Stackers bits 220 grit (2 bits/pkg)
708-1980 . . . .1/8” core 100/120 grit Drill Bit (2 bits/pkg)
Revised 12/09 TOOLS
Internet: www.glassplace.com
e-mail:[email protected]
D-24 Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
310-1034
310-1021
310-1036310-0485
310-0070
MARKERS & PENS
Product InformationPermanent, won’t bead or smudge- Waterproof- Fiber tip, neutral-smelling ink- Fast drying, light-fast- Clip on cap- Fine (0.6mm).- Medium (0.8 - 1mm).
607-0013 . . . .Black OHP Marker, Fine point607-0014 . . . .Black OHP Marker, Medium point607-0016 . . . .Red OHP Marker, Fine point 607-0017 . . . .Red OHP Marker, Medium point607-0180 . . . . White grease pencil
Super Markers - Dalo
Fine tip for precision marking. Valve - action, inked fiber tip supplies the
right amount of ink.624-0033 . . . .Black Dalo
624-1033 . . . .White Dalo
624-0450 . . . .Gold Snowman paint marker (GP-12) Great when work-ing with Brass Came - Changes solder to exact colour of
Brass.
Extra fine tip. Good for outlining glass before cutting & edge grinding.
Permanent while grinding. Light silver works well on dark glass.
607-1507 . . . . Pilot - Extra Fine Gold Marker
607-1508 . . . . Pilot - Extra Fine Silver Marker
Fusing Pens:
Formulated especially for glass, metals & ceramic surfaces where temperatures up to 2000ºF are required. Marks are permanent andbecome fused once heated. Marks can be removed at 400ºF (*White at
1000ºF) by using solvent. Ink becomes permanent at 1200ºF
265-4800 . . . .Black - Fine Point265-4802 . . . .White - Fine Point*
ZIG PAINTY PENS
The no-mess, easy-control, fast-drying, non-dripping paint marker!These markers are oil based, permanent, waterproof colours to createand design on glass, plastic, ceramic, metal or other non-porous surfaces.
15130 . . . . . . .White - Fine Tip15131 . . . . . . .Black - Fine Tip15133 . . . . . . .Gold - Medium Tip
15134 . . . . . .White - Medium Tip15135 . . . . . .Silver - Medium Tip15136 . . . . . . .Silver - Fine Tip
Fine tip - perfect for details and letteringMedium tip - great for design work and coloring
Zig Painty decorated glass pieces can be baked for colour permanence
MAGIC OUTLINING PENS
For writing or drawing fine details. Available with two different size
points: fine & regular. Fine point, with black metal handle, works well
with the Transparent Stains. They are thinner than opaques. Regular
point, with gold metal handle, is ideal for outlining with opaque stains.
Opaque Black used in the regular pen can create an outline barrier that
keeps colours separated. Pens can be used with enamels.
17205 . . . . . . .Fine - Transparent
17206 . . . . . . .Regular - Opaque
PAPER
609-2335 . . . .Carbon paper 22” X 36” enables you to easily make full
size duplicates of patterns and designs.
14800 . . . . . . .Drafting Paper - Vellum - 12" x 18" (Plain)
14820 . . . . . . .Drafting Paper - Vellum - 30” x 10 yds.
Product InformationDrafting Paper: Vellum (16 Lb. - plain),
Sheet Size: 12" x 18",Package: 10 sheets per pack.- Accepts pencil or ink in clear solid lines,
- No skipping, spreading, or feathering.
Drafting Paper: Vellum (16 Lb. - Fade OutGrid)
14845 . . . . . . .18” x 5 yds.14846 . . . . . . .18” x 20 yds.14850 . . . . . . .30” x 10 yds.
14870 . . . . . . .Drafting Film - Mylar
Sheet Size: 18" x 24" (3MM thick),Ordering: Lots of 3 (priced per sheet),- Good for making patterns & stencils,
- Translucent film (one side matte finish / reverse side smooth).
TOOLS Revised 12/09
Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
D-25 Internet: www.glassplace.com
e-mail: [email protected]
COLOR MAGIC STAINSSolvent based stain. Works on glass,metal castings, plastic, etc. Mix coloursfor an infinite variety of transparent,opal, iridized and glitter finishes. Dry tothe touch in minutes and curesovernight. Add a splash of colour on brass, solder,lead, zinc, glass and bevels with jewel-like colours in brilliant transparentopaque, and glitter shades! Use on leading, filigrees, vase caps, jewelryfindings, etc. to match, or contrast, withyour glass! Stain jewels, crystals,bevels, glass or mirror to create custom
glass colours! Add permanent colour to sandblasted pieces! Unique UVprotective coating adds a hard, clear finish to prevent colour fade fromstrong sunlight. ½ oz. bottle with handy built-in applicator brush.
TRANSPARENT - This brilliant colour you can see through, allows lightto filter through on glass.
OPAL - More dense than transparent. Some light filters through onglass.
TRANSPARENT COLOURS:
202 . . . . . . . . .Apricot
204 . . . . . . . . .Black Onyz 209 . . . . . . . . .Hot Pink
210 . . . . . . . . .Iridescent Frost
214 . . . . . . . . .Leaf Green
215 . . . . . . . . .Lemon Yellow
219 . . . . . . . . .Raspberry
221 . . . . . . . . .Royal Blue
222 . . . . . . . . .Ruby Red
226 . . . . . . . . .Spring Green 228 . . . . . . . . .Teal Blue
230 . . . . . . . . .Topaz Brown
234 . . . . . . . . .Vivid Purple
235 . . . . . . . . .White Pearl
236 . . . . . . . . .Sunset Orange
OPAQUE COLOURS:
201 . . . . . . . . .Antique Bronze 203 . . . . . . . . .Black Matte
205 . . . . . . . . .Bright Copper
206 . . . . . . . . .Bright Gold
207 . . . . . . . . .Flesh Tone
212 . . . . . . . . .Kelly Green
213 . . . . . . . . .Lapis Blue
216 . . . . . . . . .Medium Grey 217 . . . . . . . . .Peach 218 . . . . . . . . .Pink
220 . . . . . . . . .Red Poppy 223 . . . . . . . . .Shiny Silver
225 . . . . . . . . .Snow White 227 . . . . . . . . .Sun Yellow 231 . . . . . . . . .Turquoise
233 . . . . . . . . .Violet 237 . . . . . . . . .Autumn Orange
COLOUR MAGIC™ GLITTER COAT
½ fl. oz. (15ml) bottle with brush in capPixie Dust in suspension! Shiny transparent liquid glitter. Brush onglass or metal or over other Color Magic™ colours. Shimmering flecks
of metal add “glitz” to jewelry, etc.Not recommended for exposure to intense UV rays.
208 . . . . . . . . .Glitter Gold Coat 211 . . . . . . . . .Glitter Iridescent Coat
224 . . . . . . . . .Glitter Silver Coat
229 . . . . . . . . .Solvent Thinner for Transparent & Opaque Colours
232 . . . . . . . . .UV Protective Sealant for Transparent & OpaqueColours
ANCHOR CONTINENTAL - HEAVY RUBBER RESIST
Features:- Multi-purpose stencil,- Easy to cut,- Clean, easy transfer of art
to stencil,- Backed with easy release
liner,- Good for wood, glass, tile,
& more.
56250 . . . . . . .30mil - 25" x 10 yds. (White)56280 . . . . . . .18mil - 25" x 10 yds. (White)56310 . . . . . . .35mil - 25" x 10 yds. (White)
RESIST TAPEStrong, adhesive back tape. Accepts alltypes of markers. Releases clean after blast-
ing. Lower mil good for sandblasting or etch-ing. Higher mil good for heavy duty blastingor carving.
4 mil 12" x 12" sheet -- 1/Pack - Venture56000 . . . . . . . White
Vinyl Sandblast Resist - 4 mil Venture
56020 . . . . . . . White 12" x 20 yds 56030 . . . . . . . Clear 12" x 20 yds
56040 . . . . . . . Clear 24" x 20 yds
Vinyl Sandblast Resist - 8 mil Edco
560-9718 . . . . White 12" x 18 yds
560-9719 . . . . Clear 12" x 18 yds
560-9720 . . . . White 18" x 18 yds
560-9721 . . . . Clear 18" x 18 yds
560-9722 . . . . White 24" x 18 yds
560-9723 . . . . Clear 24" x 18 yds
Vinyl Sandblast Resist - 12 mil Edco
560-9224 . . . . White 24" x 18 yds
SOLID OAK FRAMING
Northern Hardwoods Framing, Inc
Solid Oak Framing
Beautiful oak framing stock ready to be cut, stained and assembled,
enhance any panel in any size.
Available with a 3/16” grove for copper foil panels and a 5/16” grove for
came panels
473-1640 . . . .1” x 5/16” x 6’
473-1641 . . . .1 3/8” x 5/16” x 6’
473-1642 . . . .2” x 5/16” x 6’
473-1643 . . . .1” x 3/16” x 6’
473-1644 . . . .1 3/8” x 3/16” x 6’
Revised 12/09 TOOLS
Internet: www.glassplace.com
e-mail:[email protected]
D-26 Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
Framing Hardware
Adjustable Installation Clips
For Deep Carved, Fused and Standard Glass.Adjustable from 0 - 1/2”. Compatible with dualglazed windows. Constructed of Polycarbonatewith UV Inhibitor. 10 clips and screws per bagColour : Clear434-4734 . . . .Self Adjusting Cabinet Glass Clip with screw
Designer Glass Clips
Clip makes it easy & safe to install art glass in frontof dual or single-glazed windows.Eliminates the highcost of triple glazing & won't take away from beautyof art.
434-4735 . . . .Self-Adjusting Clear Cabinet Glass Clip - 25 Clips/bag with screws.
Handy HangerThe brass Handy Hanger will fit all metal U - channel framingand creates an easy and attractive way to hang any metalframed panel. Hangers are installed inside the channel afterframing is done thus becoming an integral part of the finished
project. Works on all shaped frames from rounds to hexagons.
421-0112 . . . .Handy Hangers - 2 Hooks/pkg.
ROLL AND BENT HOOKS
Heavy duty hooks for wood come in two styles: bent and roll hook.
Each hook attached to frame with four screws for strength and security
to support the heaviest stained glass panels.
2 hooks per bag, 4 screws per hanger
16011 Roll Hanging Hooks 16012 Bent Hanging Hooks
Chain Hooks
Brass chain hooks with screws that mount on the
side of your frame eliminating stress on the upper
corners of your framing stock.
473-3181 . . . .Chain Hooks - 2 hooks/pkg.
473-3182 . . . .Chain Hooks - 20 hooks/pkg.
EASEL BACKS
Easel backs used with #130 brass,copper or zinc “u” came are a great
way to finish off your stained glass picture frames and give your work a
finished professional look. Available in four assorted sizes; 3½” x 5”,
4” x 6”, 5” x 7” and 8” x 10”. They have two metal hanging loops for
vertical or horizontal hanging and an extra long folding leg to stand your
frame evenly.
475-3505 . . . .3½” x 5” easel back for frame
475-0406 . . . .4” x 6” easel back fro frame
475-0507 . . . .5” x 7” easel back for frame
475-0810 . . . .8” x 10” easel back for frame
MISCELLANEOUS SUPPLIES
SAFETY GOGGLES
395-0003 . . . .Safety goggles. Eye protection while
cutting, breaking or grinding glass.
395-5699 . . . .Safety Glasses 3.0 Iruv Lens
Good quality safety glasses for all kiln work.3.0 safety rating. Excellent Protection!Protects against harmful UV and IR radiationin welding, brazing, cutting and solderingenvironments.3.0 provides medium protection. Compliance with ANSI Z87.1-2003tcertified.
GLAZING BOARD
A glazing board provides a good surface for most of
your flat work, (soldering, nailing, cutting, etc.). This
is a homosote board with moldings forming a right
angle in one corner. Works well with the Morton
Lay-out Block System.
300-1216 . . . .12” X 16”
300-1624 . . . .16” X 24”
300-2432 . . . .32” X 24”
661-0100 . . . .Industrial Razor Blades.
Single edge industrial razor blades, 100 per pack
609-5150 . . . .Animal glue for doing your own
glue chipping on glass. This glue has the
special properties needed for doing glue
chipping that modern glue does not have.
Instructions included. 1 lb. bag
SUCTION CUPS
All suction cups come with hooks.
Plastic suction cup hangers for use
with small projects such as sun-
catchers with tab for easy removal.
619-0001 . . . .1 5/8” suction cup
(priced each).
619-0003 . . . .¾” suction cup
(priced each).
619-0101 . . . .1 5/8” suction cup (priced per 100).
619-0103 . . . .¾” suction cup (priced per 100).
PRIM PINS
421-0400 . . . .glass headed pins for use on
worden lamp forms.
40 per card.
TOOLS Revised 12/09
Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
D-27 Internet: www.glassplace.com
e-mail: [email protected]
SELF ADHESIVE FELT PROTECTIVE SHEET
Premium quality felt sheet coated with a permanentadhesive.Full square foot, for cutting out custom shapes Colour: Green Size: 12” x 12”Quantity: 1 per package
598-1781 . . . .Self Adhesive Felt Protective Sheet
SELF ADHESIVE FELT PROTECTIVE PADS
Premium quality, round felt pads coated with a permanent adhesive.Die cut on a release liner forease of handling. For protection of lamp bases, jewelry boxes, furniture,walls and other contact surfaces. Colour: Green Size: Assorted; 3/8”, 1/2”, 5/8” and 3/4” diameter x1/16” thick Quantity: 46 pads per package
598-1780 . . . .Self Adhesive Felt Protective Pads
SELF ADHESIVE, NON-SKID CORK/ RUBBER STRIP
For appllication to straight edges, bench, and certain tools.Resists
sliding and protects glass when cutting.Also applied to products to
resist sliding.
Size: ¾” wide x 36 “in length (not rolled)
598-1720 . . . .Self Adhesive, Non-Skid Cork/ Rubber Strip
DOUBLE COATED PAPER MOUNTING TAPE
Constructed from a high strength, low profile crepe paper, coated on
both sides with an aggressive, rubber based adhesive
High peel, high shear strength; bonds well to wood, metal and glass
Excellent temperature resistance.Used for holding parts and patterns in
position while working. Single roll, ½” x 36 yds.
598-1771 . . . .Double Coated Paper Mounting Tape
JEWELRY AND EARRING BAILS
These bails for glass jewelry are designed to attach to back of piece.
Bail provides a hanging loop that will not obscure the beauty of the final
piece.No more wire wrapping or hole drilling needed to make beautifuljewelry.(All plated over zinc, except for sterling silver).
25 BAILS/PKG.
63080 . . . .Silver-Plated Jewelry Bails, 10mm x 25mm63070 . . . .Silver-Plated Jewelry Bails, 6mm x 15mm
63100 . . . .Gold-Plated Jewelry Bails, 10mm x 25mm
63090 . . . .Gold-Plated Jewelry Bails, 6mm x 15mm63060 . . . .Nickel-Plated Jewelry Bails, 10mm x 25mm
63050 . . . .Nickel-Plated Jewelry Bails, 6mm x 15mm63100 . . . .Gold-colored Jewelry Bails, 10mm x 25mm63090 . . . .Gold-colored Jewelry Bails, 6mm x 15mm
1 BAIL/PKG.
63120 . . . ..925 Sterling-silver Bails, 10mm x 25mm63130 . . . ..925 Sterling-silver Bails, 6mm x 15mm
'With the top loop rotated 90 degrees and offset 1/8", now you can create beautiful matching pendant earring sets.
Attach glass jewelry to earring bail. Attach yourpreferred French hook, and you're done. (FrenchHooks not included)
24 BAILS/PKG. 12 PAIR63140 . . . .Silver-plated Earring Bails, Small
63141 . . . .Gold-plated Earring Bails, Small
BASIC STAINED GLASS KALEIDOSCOPE KIT
639-1006 . . . .The Stained Glass Kalei-
doscope Kit makes a large kaleidoscope
from stained glass and regular mirror. This
is the only Clarity kaleidoscope kit that
does not include front surface mirror.You
cut regular mirror for this basic kit. This
unique design has a 10” tapered viewing
tube and two rotating hexagonal colour wheels. Completed kit approx.
12" long.
The kit contains the axle hardware, patterns, and instructions. (The
stained glass, soldering supplies, and regular mirror are NOT included.)
639-1350 . . . .If you want to make more than one 639-1006, the
Stained Glass Kaleidoscope Hardware kit contains the axle hardware
alone without the patterns and instructions.
MARBLESCOPE KIT
639-3444 . . . .The MarbleScope Kit makes
a unique kaleidoscope that uses colourful
glass marbles to generate the image. The
finished marblescope measures approx 9"
long and can be displayed on the oak
MarbleScope Stand with 3 holders for the
extra marbles.
Included are three precut pieces of optical quality aluminized front
surface mirror, four marbles, a split-ring marble holder, full size
patterns, and instructions. (The stained glass and soldering supplies
are NOT included.)
639-3445 . . . .The MarbleScope Refill contains all the parts without the
patterns and instructions.
639-3447 . . . .Marblescope base is solid oak. It
measures 4” x 9” and will hold 3 marbles.
MINI-SCOPE KIT
639-5412 . . . .Mini-scope kit. Creates a traditional stained glass wheel
kaleidoscope in a compact size. Kit includes: three
pre-cut pieces of .05” aluminized front surface mirror,
a solid brass axle with threaded end, mounting eye-
lets, a screw-on brass ball, two eyelets for legs, felt
cushion pads, 12 full size patterns for colour-wheels
and complete instructions. Also included are patterns and instructions
for making a box-end kaleidoscope which uses glass chips inside a
glass box to create images.
639-5413 . . . .A Mini-Scope Refill is also available with all the parts but
without the patterns and instructions.
639-5414 . . . .The Mini Scope Stand is
made from solid oak and measures 2½” x
6½”. This gallery-style stand can be used to
display the Mini-Scope, Marblescope, Spiral-
Scope, Flower Scope, or any kaleidoscope
up to 1-1/2” in diameter. The kaleidoscope
rests above the stand on four padded dowel pegs. Pads are included.
(Kaleidoscope not included)
Internet: www.glassplace.com
e-mail:[email protected]
D-28 Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
Revised 12/09 TOOLS
AEROSCOPE KIT
639-0147 . . . .The Aeroscope Kit creates a
unique stained glass kaleidoscope that looks
like a classic airplane.
Included are three precut pieces of alu-
minized front surface mirror, a solid brass
axle assembly, mounting eyelets, wooden wheels, solid brass rods for
struts and braces, full size cardboard patterns for both Biplane and
Monoplane designs, and complete instructions with illustrations. (The
stained glass and soldering supplies are NOT included.)
639-0148 . . . .Aeroscope refill kit . An Aeroscope Refill is also avail-
able with all parts but without the patterns and instructions.
CLOCKS & ACCESSORIES
Clock Movements
652-0716 . . . .Quartz clock movement for making a stained glass
clock. Whether you are a hobbyist or serious clock
maker, our movement will fit your needs.
Mounting Instructions:
1. Drill a 3/8" hole through the
material you are working with and
insert the movement.
2. Slide brass washer over shaft.
3. Attach dial mounting hex nut.
4. Gently press hour hand onto shaft
at 12:00 position.
5. Place minute hand over shaft at
12:00 position, and
6. Gently screw minute nut in place.
7. Press on second hand at 12:00
position.
8. Screw on cap nut if no second
hand is used.
• Operates with a single AA battery with a time keeping
deviation of approximately one minute per year.
• Approximate size is 2 1/8” by 2 1/8” by 5/8”deep
(approximate weight is 1.5oz without battery).
• Self-starting, sweep-second hand is optional
• Hand setting from the back
• Minute and hour hands included
• Does not include batteries.
NOTE: Clock hands come in black and gold, please
specify your choice when ordering.
Clock Faces These 7” or 5” diameter metal clock dials have a spun
brass finish, Arabic numerals and classic European design. These
faces can be foiled and soldered into any stained glass clock project to
add a touch of elegance!
NOTE: To determine the correct size
clock hands for each clock dial, take the
overall size and subtract ½”. Divide this
number in half to get the correct size.
Spun Gold Colour Clock Dials:
639-0111A . . .7” Arabic clock face
639-0112A . . .5” Arabic clock face
PENDULUM QUARTZ MOVEMENT.
The Pendulum Clock Pack contains a quartz pendulum movement,
adjustable length rod and bob, and a set of brass clock hands. This
pack can be used with your own pendulum clock designs, and 5” or 7”
Brass Clock Faces can be incorporated into these designs.
• Size of movement: 3”w x 3½” h x 1” deep
• Self-starting, service-free.
• Hand setting from back.
• Hands and hardware included.
• Second hand moves in continuous
motion.
• Pendulum length does not affect quartz
accuracy.
• Pendulum rods and bobs are all brass
construction and are included in the price
of all pendulum movements.
• Pendulum rod adjusts from 16”, in 1”
increments.
• Bob is 2 1/8”
652-7165 . . . .Pendulum quartz movement.
TOOLS Revised 12/09
Order Toll-Free 1-800-363-7855
Fax Toll-Free 1-877-398-7859
D-29 Internet: www.glassplace.com
e-mail: [email protected]