review of ferrites used at cern to damp homs : te/ abt equipment
DESCRIPTION
Review of ferrites used at CERN to damp HOMs : TE/ ABT equipment . M.J. Barnes and W. Weterings 05 June 2012. TE/ ABT HOM Damping Ferrites. Beam impedance reduction ferrites ( lossy + low-loss). Beam impedance reduction ferrites ( lossy + low-loss). - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Review of ferrites used at CERN to damp HOMs : TE/ ABT equipment](https://reader035.vdocuments.us/reader035/viewer/2022062410/568164f3550346895dd75e80/html5/thumbnails/1.jpg)
Review of ferrites used at CERN to damp HOMs: TE/ABT equipment
M.J. Barnes and W. Weterings05 June 2012
![Page 2: Review of ferrites used at CERN to damp HOMs : TE/ ABT equipment](https://reader035.vdocuments.us/reader035/viewer/2022062410/568164f3550346895dd75e80/html5/thumbnails/2.jpg)
TE/ABT HOM Damping Ferrites
05 June 2012 2M.J. Barnes & W. Weterings
Kicked Beam
TMR connection
entrance box connection
capacitor
ferrite yoke
ground plateground
plate HV plate HV plate
Beam impedance reduction ferrite
(lossy + low-loss)
Beam impedance reduction ferrites
(lossy + low-loss)
Damping resistor (now at both ends)
Screen conductors soldered to “ground”
Screen conductors capacitively coupled to “ground”
Beam impedance reduction ferrites(lossy + low-loss)
Beam impedance reduction ferrites(lossy + low-loss)
Only HOM damping ferrites in TE/ABT equipment, that we are presently aware of, are in the MKI tank.
![Page 3: Review of ferrites used at CERN to damp HOMs : TE/ ABT equipment](https://reader035.vdocuments.us/reader035/viewer/2022062410/568164f3550346895dd75e80/html5/thumbnails/3.jpg)
MKI: HOM Damping Ferrites • Each of the two sets of MKI HOM damping ferrites (a.k.a. “beam impedance
reduction ferrites”) consists of 9 toroidal cores: 4 or 5 of each of Ferroxcube T87/54/14-4M2 and T87/54/14-4B3 per set.
• Treatment - after surface treatment by Marina:– Treatment in air in an oven, ramped at 50°C /hour to 1000°C, plateau of 2
hours, then reduction in temperature at 50°C/hour.– Redo the same treatment but under vacuum.
Ferrite Type Tc (˚C)Bs (T) @25̊�C
& 10kHzBr (T) @ 25� C
Hc (A/m) @25� C
Denisty (g/cc)
u' @ 1MHz
u" @ 1MHz
T87/54/14-4M2 NiZn 200 0.31 ~0.1 100.0 140 1.5T87/54/14-4B3 NiZn 250 0.42 ~0.2 50.0 5 300 10
05 June 2012 3M.J. Barnes & W. Weterings
![Page 4: Review of ferrites used at CERN to damp HOMs : TE/ ABT equipment](https://reader035.vdocuments.us/reader035/viewer/2022062410/568164f3550346895dd75e80/html5/thumbnails/4.jpg)
Other HOM Damping Materials…• The SPS septa and protection elements do not
use ferrites to damp HOM’s, but do use a ceramic capacitor with carbon deposit resistors.
05 June 2012 4M.J. Barnes & W. Weterings