retain for future reference. - dreams | beds … › webfiles › assembly › 413-00205...bunk bed....
TRANSCRIPT
BunkbedAssembly Instructions
Need assistance?Call: 0344 292 0000
Dimensions mm Length Width Height
Single 2039 1012 1500
Approximate time to assemble this product
Retain these instructions for future reference
2 x people recommended to assemble this product
Do not discard any of the packaging until you have checked that you have all the parts and the pack of fixings.
You will require a cross head screwdriver
Helpful advise before you begin:1. We suggest you spend a short time reading through this leaflet
and then follow the simple step by step instructions.2. If you follow the instructions carefully the end result should be
worth the effort.3. Do not discard any of the packaging until you have checked that
you have all the parts and the pack of fittings.4. Assemble this product on a carpet.5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon completion of the assembly should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain fully tightened.
7. Keep glue and fittings out of children’s reach.8. Do not use any other tools other than those recommended to
build this product.9. Please do not use substitute parts. Use only additional or
replacement parts supplied by Dreams Ltd.10. In the unlikely event that this product has missing or damaged
parts, please call 0344 292 0000 to obtain spares.
Page 1 of 11
IMPORTANT: Read these instructionscarefully before attempting to assemble.Retain these instructions for futurereference.
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE.
Page 2 of 11
Do not discard any of the packaging until you have checked that you have all the parts and the pack of fixings.
7 x 50mm Screw
Fittings Checklist
Parts Checklist
Ø6.3 x 100mm Bolt
x 4
x 16
Ø19 x 90mm Wood Dowel
Ø6.3 x 40mm Bolt
4 x 40mm Screw
Check size of fixings against this guage (dimensions in mm)
1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0
x 8
x 6
x 16
x 68
x 6
G
A
7 x 100mm Screw
x 6C
B
E H
I
J
Ø6.3 x 30mm Bolt
Half Round NutØ10 x 40mm Wood Dowel
x 12F
Upper Headboard (Left)
Upper Headboard (Right)
Lower Headboard x2pcs
Upper Front Side Rail
Upper Back Side Rail
Lower Front Side Rail
Lower Back Side Rail
Long Guardrail x2pcs
Short Guardrail x2pcs
Guardrail Support x2pcs
Ladder Side Rail (Left)
Ladder Side Rail (Right)
Ladder Step x4pcs
Complete Twin Slat x2sets
01
02
03
04
05
06
07
08
09
10
M4 Allen Key
x 1D
01
02
03
03
04
05
06
07
08
08
09
09
10
10
1112
13
13
13
13
14
14
11
12
14
13
Page 3 of 10
Bed Frame Assembly
1
x 4Ø6.3 x 100mm Bolt x 4Half Round Nut x 1M4 Allen KeyDA I
03
03
07
A
A
I
I
A
A
D I
I
Loosely tighten the Bolts 90%
Page 4 of 11
Bed Frame Assembly
2
x 4Ø6.3 x 100mm Bolt x 4Half Round NutA I
A
A
A
A
I
I
I
I
03
03
07
06
A
A
II
Loosely tighten the Bolts 90%
02
04
4
AA
A
A
I
I A
Ax 4Ø6.3 x 100mm Bolt x 4Half Round NutA I
I
I
x 47 x 100mm Screw x 8Ø10 x 40mmWood DowelFC
3
Loosely tighten the Screws and Bolts90%
C
F
F
08
02
01C
C
C C
AA
I A
A
08 05
I
Bed Frame Assembly
x 4Ø6.3 x 100mm Bolt x 4Half Round NutA I
I
I
Page 5 of 11
01
Counterbore hole
Loosely tighten the Bolts 90%
F
Page 6 of 11
Bed Frame Assembly
5
x 4Ø19 x 90mmWood Dowel
B
B
B
B
B
Counterbore hole
01
02
03
03
06
07
Bolt hole
Page 7 of 11
Bed Frame Assembly
6
7
x 8
x 4
7 x 50mm ScrewG
Ø6.3 x 40mm BoltE
E
11
12
13
13
13
13
G
G
G
G
G
GG
G
EE
EE
Fully tighten the Screws
Loosely tighten the Bolts 90%
Page 8 of 11
Bed Frame Assembly
8
9
x 4Ø10 x 40mmWood DowelF
x 27 x 100mm ScrewC x 2Ø6.3 x 40mm BoltE
F
F
C
E
09
09
Bolt hole
E
E
Loosely tighten the Bolts 90%
Page 9 of 11
Sprung Slat System Assembly
10
11
x 6Ø6.3 x 30mm BoltH
H
10
10
14
14
Counterbore hole
Fully tighten all Bolts and Screws at this step.
Page 10 of 11
Sprung Slat System Assembly
12
Important Note:Before you use the unit, Pleasechoose the right mattress on it.Underneath the mark is the safesize you could choice.Mattress size: 90cm x 190cm
Note:• Do not stand on the bed before placing the mattress.• Assemble on a smooth flat surface.• Children can become trapped between the bed and the wall.To avoid risk of serious injury the distance between the top safety barrier and the wall shall not exceed 75mm or shall be more than 230mm.Upper bed of bunk bed is not suitable for children
under six year due to the risk of injury from falls.• Children can strangle in items such as ropes, strings, cords, harnesses and belts attached to or hung on a bunk bed.• Maximum mattress depth for top bunk is 175mm. • This product complies with European Standard BS EN 747-1:2012+A1:2015 & 747-2:2012 + A1:2015
Important Note:Take care of your children.young children may easy fallfrom the upper bunk sticker.
•
x 68
x 30
4 x 40mm ScrewJ
x 30x 4
J
J
J
09
14
Tighten the Screwswith a Phillips screwdriver (Not provided)
Check all the Bolts, screws/ parts and make sure all Fittings must be tightened properly, securely before use.
JJJJ
J
14
Page 11 of 11
Care of your Dreams FurnitureYour new bed from Dreams is more than a beautiful piece of furniture. It’s an investment in your health and wellbeing. Care for it well and you’ll enjoy a great night’s sleep for many years to come.
Should you have any issues with your product please contact our customer service team on 0344 292 0000
On DeliveryOnce your new bed is in place and all the packaging is removed, let it air for approximately 1 hour before putting on your mattress, mattress protector and bed linen.Don’t worry if your bed feels a little strange at first. It takes time for your body to adjust to a new level of support and comfort. You’ll soon be enjoying a more relaxed sleep. Please consider the surface your bed will be stood on. If your bed frame is to be stood on an uncarpeted surface please ensure that you use rubber backed mat under the legs to avoid slipping.
Day to day CarePlease use only 5% soap, 95% water solution, wiping with a damp cloth. Finally dry with a soft clean cloth. Dust with a soft clean cloth only.Check all bolts, screws and legs regularly to make sure they haven’t loosened and tighten all joins of your furniture or bedstead after 6 months. Please keep these instructions in a safe place for further use. Storage Drawers in Bedsteads are designed to carry lightweight items such as Pillows, duvets and linen. Please try to avoid storing heavier items such as books or toys.
ReturnsIf you have bought a large item such as a bed or mattress which is damaged or faulty and would like to return it, we will be able to arrive at your home and take your item away. All we ask is that your item is in perfect condition and in its original packaging (you can open the packaging to inspect your item). Items will not be able to be returned if they are not in their original packaging.For online and telesales orders, you can only return an item within 14 days from the date of your delivery.
Dreams reserve the right to modify products, dimensions, parts and fixings whithout notifications.
www.dreams.co.uk
Thank you for purchasing from
Need assistance?Call: 0344 292 0000