resume_govind
TRANSCRIPT
Govind MishraMobile: +91-9911519525E-Mail: [email protected]
To secure a challenging position in an organization so as to enhance my skills and learning, thereby enabling myself to serve the firm up to best of my ability.
Professional Experience
More than 3.8 years of experience as an Erection and commissioning Engineer in the field of Industrial Automation.Presently working at RHYTHM AUTOMATION CONTROL (I) PVT. LIMITED, NOIDA system integrator of ABB, from 5 AUG. 2013 at PROJECT ENGINNER post.I have worked with SOFCON SYSTEM (I) Pvt. LIMITED system integrator of ROCKWELL AUTOMATION, from 16 JULY 2011 to 3 AUG. 2013 at PROJECT ENGINEER post.
AUTOMATION AND INSTRUMENTATION PRODUCTS WORKED UPON
PLC AND DCS: Ability to program and troubleshoot for ABB AC500 series PLC (PM 554 ETH, PM 573 ETH, PM 583 ETH, PM 590 ETH, PM 591 ETH, PM 592 ETH) and Allen Bradley/Rockwell Micrologix, SLC- FAMILY, COMPACT LOGIX, CONTROL LOGIX PLC.
INSTRUMENTATION: Exposure of RTD, Level Transmitter, Load Sensors, Level Detector, Temperature controllers, Proximity switches, Limit switch.
SCADA AND HMI Software: Projects based on ABB (COMPACT HMI) and Rockwell RS VIEW 32, Factory Talk View ME & SE, Real time & historical Trends, Data Logging and generating Report in Excel Reporter (S\W).
NETWORK TYPE: Worked on Control Net, Profibus, MODBUS RTU & TCP/IP, and Ethernet for communication and controls.
Understanding of Process Control, SLD.
Understanding of Panel Drawing and Wiring of PLC and Drives.
Remote desktop connection: launching SCADA through internet for remote location.
Technical Skills
Name Software
PLC Control Logix, Compact Logix, Micrologix, SLC and ABB AC 500(PM 554,PM 573,PM 583,PM 590,PM 591,PM 592)
PLC Programming Software
ROCKWELL- RSLogix5000, RSLogix500, ABB-Control builder plus and CODESYS.
SCADA/HMI ROCKWELL-RSView32, Factory Talk View SE-ME ABB – COMPACT HMI.
Reporting Historian
Others VBA, MSEXCEL, MSWord etc.
Academics
Qualification
Specialization University Year Percentage
10th Science U.P.Board 2004 74
12th PHY,CHEM,MATH U.P.Board 2006 76
B.Tech Electronics and Communication
Uttar Pradesh Technical University
2011 72
Projects Undertaken:
Project 1:
Name JSW SALEM (TAMILNADU)
Automation of Wagon Tippler installed by M/S METSO MINERALS.
Role PLC and SCADA development.
PLC, SCADA,DRIVE used
ABB PM 573 ETH, Compact HMI with server and client. ACS 850 ac drive.
Description 1. Establish profibus network containing 2 no. AC DRIVE for apron feeder, 3 no. absolute encoders (to measure tippler angle, side arm charger distance, ejector distance), 2 no. SIEMENCE MEM (multi function meter) and ABB make incoming ACB.2. Make individual PLC logic for SAC, WT, TRAVERSER, and EJECTOR.3. To Program the PLC according to the control philosophy and to create the animation of the same to represent the whole system in pictorial way, now operator control the tippler from control room rather than local.
Project 2:
Name MONNET ISPAT AND ENERGY LIMITED,NAHARPALI,CHHATISGARH
AUTOMATION OF COAL WASHERY
Role PLC and SCADA development.
PLC and SCADA Used
ABB PM 590 ETH (2 no. for redundancy), Compact HMI server and client.
Description 1. Establish the CS 31 bus network for redundancy.2. Monitoring and control of Complete Plant.3. Establish PLC redundant network. 4. Test the PLC, RTU panel.5. To Program the PLC according to the control philosophy and to create the animation of the same to represent the whole system in pictorial way.6. Now whole plant is working in auto mode, configure trends and alarms in SCADA screen.
Project 3:Name MESCO STEEL ODISHA.
STACKER CUM RECLAIMER.
Role PLC and HMI development
PLC and HMI Used
ABB PM 573 ETH, HMI CP635
Description 1. Test the PLC, MCC, LCS, DRIVE panel. 2. Establish the profibus network containing 4 ac drive (CCRD, PCRD, LONG TRAVEL, SLEW) two absolute encoders (for measuring distance and angle).3. Make separate logic for LUFFING, SLEWING, CCRD (control cord rotating drum), PCRD (power cord rotating drum) and LT. 4. To Program the PLC according to the control philosophy and to create the animation of the same to represent the whole system in pictorial way.
Project 4: SOLAR PROJECT Name RAYS EXPERT, KOLAYAT,RAJASTHAN
AUTOMATION OF 25 MW SOLAR POWER PLANT
Role PLC and SCADA development.
PLC and SCADA Used
ABB PM 583 ETH, ABB PM 573 ETH, ABB PM 554 ETH and 800XA server and client.
Description 1. Establish whole plant network which is on Ethernet.2. Make PLC logic for SMB (string monitoring box) and solar invertors, these devices are on rs485 network.3. Make PLC logic for weather monitoring system, MFM. These devices are also on rs485 network. 4. Make SLD and monitoring screen of whole plant. All plant data shows on SCADA screen.5.Generate report in excel format for SMB,INVERTORS,WMS, MFM in different intervals (5 minutes,10 minutes,1 hour,1 day,1 month).6. Remote monitoring of SCADA is done via terminal server license. In this SCADA can excess via internet from remote. User can login, logout, operate SCADA from remote. .
Also done the automation of some similar SOLAR project...1. GAIL INDIA LIMITED, RAMGARH JAISALMER, RAJASTHAN- 5 MW Solar plant.2. INDIAN OIL CORPORATION LIMITED, RAMGARH JAISALMER, RAJASTHAN- 5 MW Solar
plant.3. PUNJ LLOYOD SOLAR PVT LIMITED PHALODI, RAJASTHAN- 5 MW Solar plant.4. GREEN TECH INFRA RAJASTHAN, KOLAYAT, RAJASTHAN- 5 MW Solar plant.
Project 5: Name TCI , Srinagar (J&K).
Cement Plant (1500 TPD).
Role PLC and SCADA design.PLC and HMI Used
Allen Bradley/Rockwell - Control Logix and FTView SE
Description 1. Monitoring and control of Complete Cement Plant Grinding unit which includes Horizontal mill and its overall process including packing plant. 2. Commissioning and Erection of PLC, I/O, VFD panels.3. I/O panels were on Control Net topology and MCC, VFD and Soft starter panels in Devise net4. Controlling of horizontal mill circuit dampers by the help of PID controllers.
Project 6:Name DALLA CEMENT FACTORY(JAYPEE),DALLA,SONEBHDRA,UP
AUTOMATION OF CIRCULAR STACKER RECLAIMER
Role PLC and SCADA design.PLC and SCADA Used
Allen Bradley/Rockwell - Control Logix and FTView SE
Description 1- Test the PLC, MCC, LCS, DRIVE panel. 2. Make separate logic for LUFFING, SLEWING operation for stacker and reclaimer. 4. To Program the PLC according to the control philosophy and to create the animation of the same to represent the whole system in pictorial way.
Strengths
A self-motivated team player with strong communication, analytical, relationship management and problem solving skills.
Ability to work well independently and as member of a team.
Comfortable working in PLC, SCADA Reports and DRIVES.Personal Details
Father’s Name : MR. PRADEEP KUMAR MISHRADate of Birth : 19 January 1989Address : 117/P1/170, SHIVPURI CHHAPADA KAKADEV KANPUR. PIN--208025 Declaration
I declare that the forgoing information is correct & complete to the best of my knowledge and belief.