RESUME

RUBEN GENARO FLORES

CURRENT ADDRESS3410 Oregon Drive, Unit #AAnchorage, Alaska 99517

home (907) 278-0290mobile (907) 980-2098

PERMENANT ADDRESS5619 Turtle Creek

Houston, Texas 77017home (713) 378-5396mobile (713) 882-8257e-mail roob@swbell.net

OCCUPATIONI&C Design LeadPrinciple E/I DesignerEI&C Checker

GENERAL SUMMATION OF ENGINEERING EXPERIENCE

ELECTRICAL FACILITIES DESIGN

Industrial and Commercial : All phases of electrical design, plant and office lighting, class 100 clean rooms, chemical lab, grounding, cable tray systems, motor control center arrangements, schematic and wiring diagrams, computer room installations, underground and exposed conduit.

ELECTRICAL INDUSTRIAL DESIGN

Petro-chemical : Original control schematics, one line diagrams, wiring and interconnection diagrams, programmable logic controllers, motor control center arrangements, cable tray and conduit systems, underground duct bank systems, instrumentation, lighting, heat trace systems, grounding, hazardous area design and material take-off. Manhour estimates, project schedules, project status and weeklyproject meetings.

INSTRUMENT INDUSTRIAL DESIGN

Petro-chemical : Process and instrument diagrams, programmmable logic controllers (BPCS and SIS), flow computers, loop diagrams, fire and gas detection systems, computer room installations, closed-circuit television, fiber-optic systems, cable block diagrams, control panel layouts, I/O schematic diagrams, connection diagrams, junction boxes, wiring diagrams, annunciator panel layout, logic diagrams, cause and effect matrix, and material take-off. Manhour estimates, project schedules, project status and weekly project meetings.

ELECTRICAL POWER DESIGN

Coal-fired and Gas-fired Generating Stations : Original control schematics, one line diagrams, wiring and interconnection diagrams, programmable logic controllers, motor control center arrangements, cable tray and conduit systems, underground duct bank

c:\my documents\documents\resume37.doc

RUBEN GENARO FLORES

systems, instrumentation, lighting, grounding, hazardous area design and material take-off.

ELECTRICAL PIPELINE DESIGN

Gas & Liquid Compressor and Meter Stations : Original control schematics, one line diagrams, wiring and interconnection diagrams, programmable logic controllers (BPCS and SIS), motor control center arrangements, variable frequency drives, cable tray and conduit systems, underground duct bank systems, instrumentation, lighting, grounding, hazardous area design and material take-off. Manhour estimates, project schedules, project status and weekly project meetings.

ELECTRICAL MARINE DESIGN

Off-Shore, Fixed & Drillship : Power distribution, cable tray systems, lighting systems, navigational lights, general alarm systems, emergency shutdown system, grounding and

material take-off. Subject to A. B. S. approval.

FIELD EXPERIENCE

I/E Inspection, field survey of existing equipment, as-built drawings, assist field in plant check-out and start-up.

ExperienceNov 2011 - URS E&C Division, Anchorage, AlaskaAug 2015 I&C Design Lead : Process and instrument diagrams, instrument loop diagrams,

programmmable logic controllers (BPCS and SIS) Siemens S7 and Bailey Net 90, ROC 827 flow computer, cable block diagrams, control panel layouts, I/O schematic diagrams, connection diagrams, junction boxes, wiring diagrams, instrument location plans, cable routing plans, conduit and cable schedules, instrument index, I/O list, cable tag list, wire tag list, nameplate tag list, datasheet index, datasheets, MTO index, MTO, installation details and hazardous area design using AutoCad 2007 CAD System. I&C Design Lead on CPF2 Fuel Gas Conversion on the North Slope for ConocoPhillips Alaska Inc.I&C Checker : CPF1 Fuel Gas Conversion on the North Slope for ConocoPhillips Alaska Inc.I&C Design Lead : Process and instrument diagrams, instrument loop diagrams,programmmable logic controllers (BPCS and SIS) Siemens S7, ROC 827 flow computer, cable block diagrams, control panel layouts, I/O schematic diagrams, connection diagrams, junction boxes, wiring diagrams, instrument location plans, cable routing plans, REIM, conduit and cable schedules, instrument index, I/O list, cable tag list, wire tag list, nameplate tag list, datasheet index, datasheets, MTO index, MTO, installation details and hazardous area design using AutoCad 2007 CAD System. I&C Design Lead on OPL Fuel Gas Conversion on the North Slope for ConocoPhillips Alaska Inc.I&C Design Lead : Process and instrument diagrams, instrument loop diagrams,programmmable logic controllers (BPCS and SIS) Siemens S7, cable block diagrams, control panel layouts, I/O schematic diagrams, connection diagrams, junction boxes, wiring diagrams, instrument location plans, cable routing plans, REIM, VSD module, Producer and Injector Wellhouses, conduit and cable schedules, instrument index, I/O list, cable tag list, wire tag list, nameplate tag list, datasheet index, datasheets, MTO index, MTO, installation details and hazardous area design using AutoCad 2007 and SmartPlant 3D/2D Cad Systems. I&C Design Lead on DS1H NEWS drillsite expansion on the North Slope for ConocoPhillips Alaska Inc.

RUBEN GENARO FLORES

Sept 2010 - Under contract to Anvil Alaska, Anchorage, AlaskaNov 2011 Lead Sr Electrical & Control Systems Designer : Process and instrument

diagrams, instrument loop diagrams, one line diagrams, junction boxes, motor control schematics, block diagrams, wiring and interconnection diagrams, panel layout and BOM drawings, above and underground plan drawings, panel schedules, hazardous area design and material take-off using AutoCad 2006 CAD system. Lead E & C Designer on Generator Replacement at Pump Station No.6 for Alyeska Pipeline Service Company. This required attending weekly project meetings, manhour estimates and project statusing.Sr Electrical & Control Systems Designer: : Process and instrument diagrams, instrument installation details using AutoCad 2006 CAD system. Sr. E & C Designer on HPNA Removal Unit for Tesoro Refinery.Lead Sr Electrical & Control Systems Designer: Process and instrument diagrams, instrument loop diagrams, one line diagrams, junction boxes, motor control schematics, block diagrams, fire and gas detection systems, wiring and interconnection diagrams, panel layout and BOM drawings, above and underground plan drawings, panel schedules, hazardous area design and material take-off using AutoCad 2006 CAD system. Lead E & C Designer on East/West Metering Building Freeze Protection at Valdez Marine Terminal for Alyeska Pipeline Service Company. This required field trips, attending weekly project meetings, manhour estimates and project statusing.

Oct. 2009 - Under contract to ASRC Energy Services, Anchorage, AlaskaAug 2010 Principle E/I Designer : Process and instrument diagrams, junction boxes, wiring

and interconnection diagrams, hazardous area design and material take-off using AutoCad 2004 CAD system. Install Heat Trace Terminal Boxes at GC3 Tank 8512 Recommissioning for BP Prudhoe Bay (WOA).Principle E/I Designer : Electrical and Instrument Checker for Chops Pilot Phase 1 Interconnects at MPU S Pad for BP Prudhoe Bay (WOA).Principle E/I Designer : Electrical and Instrument Checker for various modules at Nikaitchuq - Oliktok Point Pad for ENI (OPP).Principle E/I Designer : Electrical and Instrument Checker for Heater Replacement at GC2 Flare Liquids Removal Mod 40 for BP Prudhoe Bay (WOA).Lead Principle E/I Designer : Process and instrument diagrams, programmmable logic controllers, loop diagrams, junction boxes, wiring and interconnection diagrams, heat trace isometrics, grounding, hazardous area design and material take-off using AutoCad 2004 CAD system. Install A-B Micro-Logics 1400 PLC at GC1 Flare Liquids Removal Mod 40 for BP Prudhoe Bay (WOA).

Oct. 2005 - Under contract to NANA/Colt Engineering, LLC Anchorage, AlaskaOct. 2009 Principle E/I Designer : Electrical and Instrument Checker for Well Tie-ins at

Kuparuk for Conoco/Phillips.Principle E/I Designer : Process and instrument diagrams, programmmable logic controllers, loop diagrams, fiber-optic systems, junction boxes, wiring and interconnection diagrams, grounding, hazardous area design and material take-off using AutoCad 2004 CAD system. Install Tracerco Level Profiler Transmitter and PLC at GC2 B Bank Dehydrator for BP Prudhoe Bay (WOA).Principle E/I Designer : Process and instrument diagrams, programmmable logic controllers, loop diagrams, fiber-optic systems, junction boxes, wiring and interconnection diagrams, grounding, hazardous area design and material take-off using AutoCad 2004 CAD system. Install Tracerco Level Profiler Transmitter and PLC at GC2 D Bank Dehydrator and Slugcatcher for BP Prudhoe Bay (WOA).

RUBEN GENARO FLORES

Principle E/I Designer : Electrical and Instrument Checker of the instrument interconnects and turbine controls for new compressor at Beluga River Unit for Conoco/Phillips.Principle E/I Designer : Electrical and Instrument Checker of the turbine controls for LNG Compressor Replacement at Kenia for Conoco/Phillips.Principle E/I Designer : Process and instrument diagrams, programmmable logic controllers, loop diagrams, fiber-optic systems, junction boxes, wiring and interconnection diagrams, grounding, hazardous area design and material take-off using AutoCad 2004 CAD system. Install Production Heater H-1E02 at Kaparuk DS1E WSAK for Conoco/Phillips.Principle E/I Designer : Process and instrument diagrams, programmmable logic controllers (Seimens and Honeywell), heating and ventilation control panels, loop diagrams, junction boxes, wiring and interconnection diagrams, grounding, hazardous area design and material take-off using AutoCad 2004 CAD system. Lead E/I Designer for O & M (Plant Engineering) Group. H & V Repairs 2007 for GC2, GC3 and GC1 Skid 18 Gas Compressor for BP Prudhoe Bay (WOA).

March 2002 - The Automation Group Houston, TexasOct. 2005 Principle Control Systems Designer : Electrical cable tray distribution system

(4160v and below), relay panel layouts and wiring diagrams, motor schematics, wiring and interconnection diagrams using AutoCad 2002 CAD system. Upgrade Bently – Nevada Vibration System for multiple compressors at Shell Oil Company.Principle Control Systems Designer : Field survey of existing Leeds & Northrop Combustion Controls Cabinet, Bailey Net 90 Cabinet, Yokogawa Recorders and Datalogger for DCS upgrade in Coal-Fired Power Plant at Rock River, Wisconsin for Alliant Energy. This involved creating a Master I/O Database, wiring and connection diagrams using AutoCad 2002 CAD system.Principle Control Systems Designer : Field survey of existing Main Control Board for DCS upgrade in Coal-Fired Power Plant at Columbia, Wisconsin for Alliant Energy. This involved creating a Master I/O Database, motor schematics, wiring and connection diagrams AutoCad 2002 CAD system .Principle Control Systems Designer : Field survey of existing fiber optic, alarm and CCTV cables for new Central Control Room installation in Valero Refinery at Texas City. This involved creating a Master Fiber Optic Cable Database, fiber optic cable routing plans and details, underground conduit routing plan and details, aboveground conduit routing plans and details, conduit and cable schedules, and installation details.Principle Control Systems Designer : Electrical cable tray distribution system(480v and below), aboveground conduit plans and details, grounding plan and details, UPS distribution panel schedules using AutoCad 2004 CAD system.

March 2000 - Under contract to MEI Consultants, Inc Houston, TexasMarch 2002 Sr. Design Leader : Electrical cable tray distribution system (4160v and below),

4160v switchgear, 480v motor control centers, PLC control cabinet, PLC chassislayout and wiring diagrams, I/O schematic and wiring diagrams, schematics, wiring and interconnection diagrams using AutoCad Release 14 for compressor stations at Plantation Pipeline Company. This required visits to electrical building vendor, NS Controls, for assistance in wiring of electrical buildings before shipment to the sites.

Instrument/Electrical Inspector : Field inspector for Teppco at North HoustonDelivery, Terminal, IAH Interface Detector and Junction sites at IAH Airport. This also included as-built drawings.Instrument/Electrical Inspector : Field inspector for Teppco at Monee LPG Truck

RUBEN GENARO FLORES

Loading Facility in Monee, Illinois. This included daily construction reports, Hazardous-Operation document review, plant check-out, start-up and as-built drawings.Sr. Design Leader : Electrical underground distribution system (480v andbelow), 480v motor control center, PLC control cabinet, PLC chassis layoutand wiring diagram, I/O schematic and wiring diagrams, schematics, wiring and interconnection diagrams using AutoCad 2000 for compressor station at CMS Energy.

Nov. 1998 - TI Energy Services, Inc. Houston, TexasMarch 2000 Lead Instrument/Electrical Designer : Electrical cable tray distribution system

(2400v and below), 2400v switchgear, 480v motor control centers, variable frequency drives, PLC control cabinets, PLC chassis layout and wiring diagrams, I/O address and wiring diagrams, lighting and power panels, grounding, one line diagrams, schematics, wiring and interconnection diagrams, fire and gas detection systems, hazardous area design, junction box wiring diagrams, and material take-off using AutoCAD Release 14 and Microstation Version SE CAD systems for compressor and meter stations at Exxon Pipeline Company, Columbia Gulf Transmission Company and El Paso Energy Company. This work required field trips to verify and as-built drawings. Introductory training on WonderWare human machine interface graphics program.

May 1998 - Jacobs Engineering Group Houston, TexasNov. 1998 Senior Electrical Designer : Electrical cable tray distribution system (480v and

below), 4.16kv switchgear, 480v motor control centers, dc drives, lighting and power panels, lighting, grounding, ups systems, one line diagrams,

schematics, wiring and interconnection diagrams, hazardous area design,control panel layout, instrument location plans, I/O schematics, loop diagrams and material take-off using AutoCAD Release 13 CAD system for new Extruder Line BA and BD at GE Plastics.

Nov. 1997 - Under contract to Brown and Root @ NASA-JSC Clear Lake City, TexasApril 1998 Senior Electrical Designer : Electrical cable tray distribution (480v and below),

one line diagrams, cable riser diagrams, power plans and details at Mission Control Center. Redistribution of 480v power feeders for continuous

operations of BLDG 30S for Space Station and Space Shuttles Operations using Micro-

Station 5.1 CAD System.

Sept. 1997 - Under contract to Engineering Mechanics Inc. Houston, TexasNov. 1997 Lead Instrument/Electrical Designer : Electrical cable tray distribution (480v and

below) on derrick of drillship using AutoCAD Release 13. Cable schedule using Microsoft Excel 97 in Windows NT operating environment.

Sept. 1996 - Under contract to Dow Chemical Co. Houston, TexasSept. 1997 Senior Electrical Designer : Electrical cable tray distribution systems (4.16kv and

below), 4.16kv switchgears, 480v motor control centers, variable frequency drives, lighting and power panels, lighting, grounding using PasCE 3D

CAD System. Pole line cable routing (4.16kv and 14.4 kv), one line diagrams, panel schedules and heat tracing systems using MicroStation 95 CAD System. Scope of work, labor and material Specifications, cable schedules, equipment list and grounding schedules using Project DataBase System. Cost estimates,

equipment and grounding schedules using Microsoft Excel 95 in Windows NT operating environment. Field visits to survey existing electrical equipment.

RUBEN GENARO FLORES

July 1995 - ABB Lummus Crest Inc. Houston, TexasSept. 1996 Senior Electrical Designer : Electrical cable tray distribution system (4.16kv and

below), lighting and power panels, lighting and cable tray supports using PasCE 3D CAD System. This included one line diagrams using Instrument/Electrical Database Program (IEDP), automated material take-off using Material Take-off Control System (MTCS).using AutoCAD Release 12 CAD system for grassroots ethylene plant. Underground distributon system (4.16kv and below), lighting and power panels, hazardous area design and material take-off using AutoCAD Release 12 CAD system for NGL compressor station in Saudi Arabia.

NOTE : Previous experience and references available upon request.

COMPUTER-AIDED DRAFTING (CAD 2D/3D) TRAININGPasCE 3D Training (Plant Applications and Systems from Combustion Engineering) 1989PasCE 3D Training (Plant Applications and Systems Concurrent Engineering) 1995

Microstation 2D Version 4.0 Training 1993AutoCAD 2.5 Introductory Training 1986AutoCAD Release 9 Advanced Training 1987AutoCAD Release 10 Advanced Training 1990AutoCAD AutoLISP Programming 1991AutoCAD Release 12 Advanced Training 1994

SmartPlant 3D Training 2013SmartPlant 3D Admin Training 2013SmartPlant Instrumentation Training 2013SmartPlant Instrument Admin Training 2013SmartPlant Electrical Training 2014SmartPlant Electrical Admin Training 2014

SOFTWARE PROFICIENCYMicrosoft Office SuiteAutoCADSmartPlant 3DSmartPlant Instrumentation (SPI)

CLEARENCESTWIC – Transportation Worker Identification Creditials

ASSOCIATIONSPhi Theta KappaInstrument Society of America

EDUCATIONPasadena High School 1977 Diploma Brown and Root Design Drafting - 1977San Jacinto College 1980 Bechtel Power Division -University of Texas Austin 1980 - 1981 Electrical Discipline Training Program 1979Houston Community College 1997 - 2002 Bechtel Designer Training Program 1981