resume outline for canada

3
 JAYSON CASTRO QUIAMBAO Saudi Oger, P.O. Box 1449 Riyadh 11482 K.S.A. +966546048902 my pareko_10@yahoo.com POSITION APPLIED FOR: Pipe Fitter Objective: A challenge position that will fully optimize my capabilities and top of my experience and potentials and to be able to work in institution were fast learning opportunity is there that my working experience can be given a chance to be applied with and learned more. Profile: Clean and maintain pipe units and fittings and flush system. Cut opening for pipe in walls, floors and ceilings using hand or power tools or machines. Select type and size of pipe required. Measures, cut, thread and bend pipe to required shape using hand tools and power tools. Install supports, valves, piping and control systems. Read and interpret drawings, blueprints and specifications to determine layout requirements. Test system for leaks using testing equipment. May prepare cost estimate for clients. Weld, braze, cement, solder and thread joints to join pipes and fabricate sections of piping system. Remove and replace worn components and reactive system. Fabricate spools as per isometric drawing.  Assign at module area erectio n of pipe to each elevation. Achivements:  Awarded the 2 Milli on Safety Man hou rs Certificatio n Saudi A ramco and Saipem.  Awarded the ISO 9 000-200 1 Safety C ertificatio n of HTI Lt d. In the Philippines. Education: Diploma in 2 years course Computer Technician 2002-2004 STI Colleges Courses included: Trouble shooting, Computer installation, and Wirings for file and sharing.

Upload: diane-mahal-ko

Post on 02-Apr-2018

214 views

Category:

Documents


0 download

TRANSCRIPT

 

 

JAYSON CASTRO QUIAMBAOSaudi Oger, P.O. Box 1449 Riyadh 11482 K.S.A.

+966546048902 [email protected]

POSITION APPLIED FOR:

Pipe Fitter

Objective:

A challenge position that will fully optimize my capabilities and top of my experience and potentials andto be able to work in institution were fast learning opportunity is there that my working experience can be givena chance to be applied with and learned more.

Profile:

Clean and maintain pipe units and fittings and flush system.

Cut opening for pipe in walls, floors and ceilings using hand or power tools or machines.

Select type and size of pipe required.

Measures, cut, thread and bend pipe to required shape using hand tools and power tools.

Install supports, valves, piping and control systems.

Read and interpret drawings, blueprints and specifications to determine layout requirements.

Test system for leaks using testing equipment.

May prepare cost estimate for clients.

Weld, braze, cement, solder and thread joints to join pipes and fabricate sections of piping system.

Remove and replace worn components and reactive system.

Fabricate spools as per isometric drawing.

 Assign at module area erection of pipe to each elevation.

 

Achivements:

 Awarded the 2 Million Safety Man hours Certification Saudi Aramco and Saipem.

 Awarded the ISO 9000-2001 Safety Certification of HTI Ltd. In the Philippines.

Education:

Diploma in 2 years course Computer Technician 2002-2004

STI Colleges

Courses included: Trouble shooting, Computer installation, and Wirings for file and sharing.

 

Work History

Pipe Fitter:  

Saudi Oger July 17, 2009 up to presentRiyadh K. S. A.

A Saudi Oger Contractor 

Princess Noura University:

(The Biggest University In The Whole World)

 

DUTIES AND RESPONSIBILITIES:

• Responsible for Hydro-Testing.

• Fit-up and erection of pipes.

• Installation of Rain water, Drainage system, Vent line, Floor drain, Gas line for special kitchens, Water 

supply, (Cold / Hot water), Waste line and others lines that was connected to Plumber works.

• Installation of Insulation for pipes.

• Preparation of tools every first hour in the morning.

• Safety gadgets.

• Reporting to Respective Foreman before working.

• Finishing the daily assignment given by the Respective Foreman.

• Communicate to QC for the RFI.

• Cast Iron Soil Pipes (Hub and Spigot)

• uPVC / cPVC pipes

• Reads and interpret Plot Plans, Drawings, Spool sheets and Details Sheets and Plans work procedure.

• Selects, Measures, Cuts and Install Underground and Above ground Piping system joints and connections.

Including Concrete pipes, carbon steel and Fiber glass pipes using hand and power tools and aided bySling and Aligning Dogs.

• Knows and complies with all relevant Safety Rules and regulations.

• To make a scaffoldings in order for this high rise project.

 

Interests:

• Familiar and able to interpret Piping Isometric drawing.

• Practically electricity plumber, carpentry, mason and building painter.

• Knowledgeable in Computer.

• Wide Reader in internet surfing.

• Playing basketball and jogging to stay physically fit.

• Hard working and perseverance.

References: