RESUME

SHETE GANESH SHIVAJIRAO Email Id:gspatil555@gmail.com in.linkedin.com/in/ganesh-shete Mob: +91-9421453463

Carrier Objective:

To work enthusiastically for organization for its development and enhance my engineering knowledge and skills to achieve organizational and personal goals.

Educational Qualification:

Degree Specialization College/University Year of

Passing

CGPA/%

M.TECH Process Instrumentation COEP, Pune 2016 7.69/10

BE Instrumentation & Control Government College of Engg.Chandrapur.

2013 68.40%

HSC Physics, Chemistry, Maths Maharashtra Board 2009 70.0%

SSC Maharashtra Board 2007 81.46%

Technical Skills:

Platforms : Windows.

Languages Application : PLC Ladder, FBD. Softwares : PLC (Schneider M340, AB Control-logics 5560, AB Micro

850,820), Panel View 800 HMI, DCS DELTA V, OPC (Kepware 5.19), Plant Web Historian, SCADA Factory Talk View, MATLAB/Simulink

Hardware Instrumentation Project

: PLC, DCS, Analog circuit design. : Sensors / Transducers / Actuator / Automation : Developing / designing / Co-ordination

Industrial Projects:-

1. Automation of Batch Pan System & HMI design for Narmada Sugar Industries, Ankaleshwar, Gujarat.

2. Automation of PH ratio Control System HMI design for Narmada Sugar Industries, Ankaleshwar, Gujarat.

3. Development & Automation of Flow& Level Sensors characterization pilot plant for Kumar Gurav College of Engineering, Coimbatore.

Academic Projects:-

1. Design, Development and comparison of various control strategies for Binary Batch Distillation column (MTech 2ndyear)

Modification of the design of existing lab based binary batch distillation column for maximum product extraction. Communication between Schneider M340 PLC to Emerson’s Delta V DCS system using MODBUS protocol & with Control logics 5560 PLC.Programming for the column by using RSlogics 5000 on Control logics 5560 PLC. PLC & Delta V DCS system for application of varies control strategies.

2. Device Communication Using Foundation Fieldbus Protocol & Delta V DCS & its Performance Analysis

It this project, I focused on implementing cascade control in the field using Foundation Fieldbustechnology. The key consideration is the assignment of master and slave PID block locations in Fieldbus devicesfor Minimizing network traffic without negative impact on an ability to control the process. A plant model using multi-vendor Fieldbus devices for level-to-flow cascade control is described. This project examines calculated macrocycle timing schedules produced by the DeltaV system for six possible field control locations of the PID blocks. Experimental results obtained from the preferred field control location with minimum number of scheduled data transmissions over the network are also included.

3. Smart water distribution system for buildings Using PLC In this project we developed the system which uses pressure head of the water in the water main pipe line of the building to control the speed of the pump which directly pump the water from tank located at ground & not on overhead of the building. Hence ensures 24*7 water supply with less energy consumption for the multifloor building .This concept also reduces the load of over storage water tank on the buildings. Depending on the usage of water, necessary and appropriate control action will be taken to ensure that the user is never left with a shortage of water.

4. Micrologics 1400b to MATLAB communication using KEPWARE 5.19 OPC:

This project includes the establishment of communication between Micrologiscs 1400b to MATLAB 2014a &Implementation of three element control for lab based Boiler to control level, steam flow & feed flow of the Boiler.

Area of Interest: -

1. Research & Development (R&D).

2. Process Industries.

3. Industrial Automation. 4. Embedded Systems.

International (Papers Published):

1. Presented a (IEEE) paper entitled "Implementation of Foundation Fieldbus using DCS for flow control " at the “International Conference on Industrial Instrumentation & Control (ICIIECS 2015)” organized by College of Engineering KARPAGAM.

Courses, Workshops, Trainings: -

1. Conducted Eight Weeks Course On “INDUSTRIAL AUTOMATION (PLC, SCADA)” on AB (Control logics 5560) PLC at Department of Instrumentation & Control, College Of Engineering, Pune.

2. Participated in Two day’s workshop On “Smart Communication Protocols” Organized By COEP, Pune.

3. Conducted One Week Course On “INDUSTRIAL AUTOMATION (PLC, DCS)” on Virtual Lab at Department of Instrumentation & Control, College Of Engineering, Pune.

Contribution to Extra Curricular Activities:-

1. President of National Service Scheme of Govt. College of engineering, Chandrapur for year 2012-2013.

2. Founder of Student Co-operative Mess at Government College of Engineering for year 2011 to 2013.

Achievements:-

Winner of National Level Paper Presentation ‘Pursuit-2010’, which was held at Government,

college of engineering, Chandrapur.

Personal Information:- Date of Birth : 04th Sept 1989

Present Address : 4/206 Kundan Apartment, Rasta Peth,Pune

Permanent Address : ‘5’ Shivkrupa Soc .Near SwayamwarMangal Karyalaya, Radhika,Nagar, Nanded.

Language Known : English, Hindi, Marathi. Hobbies : Meditation, Badminton

Declaration:- I hereby declare that all the above mentioned information is correct and true to the best of my knowledge.

Date: 24/10/2016

Place: Pune Ganesh Shivajirao Shete