AVADHESH KUMAR 2/284 Jawahar Nagar Jaipur (R.J.) Phone no. 09950033985, 9411220859 Email-awi140486@rediffmail.com --------------------------------------------------------------------------------------------------------------

JOB OBJECTIVE:-

To raise my professional career by amalgamation of capabilities with experience of your organization.

PROFESSIONAL SUMMARY:-

9.6 years’ work Experience in Supplier Quality (New Product Development) and Vendor quality assurance, with OEM & Automobile industries.

Good Manufacturing Process & Inspection standard knowledge of Powertrain, Gear box assy. parts Transmission and vehicle Assy. Parts, Casting(Ferrous & Non Ferrous), Forging, Machining, Gears, Shafts, fixture, gauge etc.

Commodity leader of Casting ,forging ,Machining and Gear Development For Project Phoenix( MULTIX) from starting till vehicle Launch

Currently working As Team leader on BS-IV, Synchro & Gamma Project new parts development at supplier end for Casting, Forging Machining and Gear Commodity.

Knowledge of process & Product audit, Field failure analysis, Ability of problem solving Tool and techniques, Supplier up gradation, QC tools .

Good knowledge about,SPC,FMEA.PPAP,APQP,8D,MSA,7QC Tools,PFD,5’S,Kaizen,PPM,

ACADEMIC CREDENTIAL:- 10th pass from U.P. Board in 2002 53%

12th pass from U.P. Board in 2004 with 63%

Diploma in Mechanical Engineering from Govt. Polytechnic faizabad (U.P) in year 2007 with aggregate of 1st division 67%.

B.Tech. (correspondence) from BIRTM Grater Noida with 1st division.2013.

WORK EXPERIENCE:- Currently working with M/S EICHER POLARIS PVT.LTD. Gurgaon /Jaipur As a Asst. Manager in Supplier

Quality Assurance (New development) for Casting ,Forging ,Machining and Gear . From 28 Oct.to till Date.

2.1 Year work experience with M/S TATA MOTORS LTD. Pant nager (UTTRAKHAND) As a Officer in Supplier Quality Assurance. From 15 Oct. 2011 to 20 Oct. 2013.

2 Year work experience with M/S OERLIKON GRAZIANO DRIVING SYSTEM (an Italian MNC) as a Engineer in Supplier quality assurance From 5 oct 2009 to 5 oct 2011.

2.2 year experience with M/S Jay Bharat Maruti Group (JBM) Neel metal product ltd. As a TM-1 Incoming quality from 1 July 2007 to 30 sep.2009

EICHER POLARIS PVT.LTD. PROFILE:-

Eicher Polaris Pvt .Ltd.(A joint venture of Eicher motors ltd. and Polaris industriesMNc OEM from USA.) is a Green field project of automobile industries, Which is being establish in Jaipur Rajasthan for personal utility vehicles manufacturing .Eicher motors group is the fast growing company of India in the field of 2 wheeler and LCV, HCV and Polaris industries is the leader of off-road vehicle Manufacturer in the world and main competitor of Harley Davidson Motorcycle in the world for high range Motorcycle manufacturing.

JOB PROFILE IN EICHER POLARIS:-

Supplier selection audit with purchase team before offering the business to know about supplier capability for quality, production and delivery.

Drawing Review and interact with Designer for correction and up gradation in drawing. APQP discussion and drawing related technical query Discussion with supplier and help for resolving

all quality problem related supplier. Inspection standard and check sheet preparation for new developed parts. Inspection and Approval of initial sample for new development part at supplier end parts like Casting,

forging, machining, shaft and Gears etc. Involvement to improve quality and facilities by implementing PPAP at supplier end during new

development. Review part manufacturing process at the supplier's end. Supports Evaluation of the design

parameters, product specification, dimensional and metallurgical measurement reports, and necessary technical documents.

Field failure analysis, Analyse with supplier, finds route cause & implements corrective & preventive action at Suppliers end.

Perform Process & product Audit of Supplier for Up gradation. PPAP activity at supplier end for related commodity parts. Daily tracking on line problem and take action at supplier end and there monitoring. Review and verify of CAPA for every NC at supplier end and in-house as well. System and supplier selection Audit of Supplier for up gradation. Developing the system and format for better quality and transparency. Verification and validation of new or change products/Process. Support for achieving Quality targets like PPM, Audit compliance, Timely closure of NC for

commodity. Continuous improvement activities at supplier end to improve Quality, Delivery and competitiveness.

TATA MOTORS LTD. PROFILE:-

TATA MOTORS LTD. CVBU (LCV)Pantnagar with one of India's largest automobile company, a leader in commercial vehicles in each segment, and among the top three in passenger vehicles with winning products in the compact, midsize car and utility vehicle segments. India’s first company Winner sward of honour .in the field of safety n environment, strength of company employee approx 9000 thousand & per day 1650 vehicle production capacity with Asia’s largest pent shop.

JOB PROFILE IN TATA MOTORS:-

Involvement in Approval of initial sample and layout inspection of Vehicle Assy. parts like welded assy. Parts. and, Casting forging, machining (Mechanical & Functional parts).

Support investigation of the non-conformance of the supplier parts and suggests improvement actions. Track the progress.

Field failure analysis , Analyze with supplier, find route cause & implement corrective & preventive action at Suppliers end

Perform Process & product Audit of Supplier for Up gradation. Review of PPAP documents and APQP for new developing parts Controlling & monitoring Inspection of regular Incoming components and interacting with vendors

on quality aspects. Verification and validation of new or change products/Process. Support for achieving Quality targets like PPM, Audit compliance, Timely closure of NC for

commodity. Continuous improvement activities at supplier end to improve Quality, Delivery and competitiveness. CMM Programming and cad comparison for new developing parts. Providing training and technical assistance to vendors for Sample approval in first shot.

OERLIKON GRAZIANO PROFILE:- Oerlikon Graziano is the world’s largest and global manufacturer of transmission system and shafts &

Axel Assembly, CVT (continual Variable transmission)Assy. , especially for agricultural, off-highway, industrial and power generator market and is the world leader in the design, development and manufacture of synchronisers For Agricultural and Off-Highway vehicle industry.Oerlikon Graziano is manufactures transmission System, gears, bevel gears Crown pinion Shaft & Axel assembly for New Holland, JCB India, Carraro, Iveco, Case New Holland, Eicher, Force motor ZF india & Trans axles for Club Car. USA, China .

JOB PROFILE IN OERLIKON Graziano:-

Involved in Approval of initial sample and layout inspection of Assy. parts machining ,casting ,forging & Turned Parts & axel.

Implementation of DOL system for incoming parts. Continuous improvement activities for supplier to improve Quality, Delivery and competitiveness Product & Process audit vendor end for New Part Development & regular parts Field failure analysis. To generate Quality rating Supplier wise, rejection trend, and taking decisions accordingly. To make improvements & cost shaving at supplier end to sustain better quality. Involve In,SPC,PPAP,APQP,8 D,7QC TOOls, Work instruction ,PFD,5’S,Kaizen,PPM, Documentations

INSTRUMENTS/MACHINES IN TOUCH:- CMM(Wenzel, stefelmayer , mitutoyo ), Contour tester(mitutoyo-2000) Profile projector, Surface roughness tester(mitutoyo-SJ-400) ,digital height gauge Height Gauge, Profile Projector, Hardness Tester, Vernier, Micrometer, Bore Gauge Pitch Gauge Filler Gauge Thread ring Gauge. )

JBM (Neel metal ) Profile:- M/S Jay bharat Maruti Group Company is leading and fast growing as a automobile parts

manufacturing in India, Company’s base is in Gurgaon.In field of sheet metal & tool dies manufacturing. It is a ISO/TS16949, ISO1400I, OHSAS18001-2007 certified unit dealing in large sheet Metal Body parts component & welded assy. exhaust system. Welding Fixture & Gauge & SPM mfg.

.

Key Responsibilities:- Inspection & Rectification of new welding Fixtures & gauge and there trails, as per customer

requirement. Inspection of incoming material m/c part, Sheet metal parts ,Gauge & panel checker & many type

Welded Assy. part According Car line ,Scooter line CMM Programming Cad compression. Installation and commissioning of Welding fixture and gauge as per requirement. Continuous improvement activities for supplier to improve Quality, Delivery and competitiveness

COMPUTER EXPOSURE:- Knowledge of SAP “MS OFFICE (EXCEL, POWER POINT, WORD)”.

Current salary CTC- 6.5 Lack P/A

Expected salary –Negotiable

Personal Profile

Father’s Name : Sh. Ramapati Date of Birth : 14/04/1986Nationality : IndianPassport no. : K2433413Marital Status : SingleHobbies : Reading newspaper and visit of beautiful places Languages Known : Hindi & EnglishPermanent Address : Vill+Post Mahuwari, Dist. Ambedkar Nager (U.P.)224234