response spectra
TRANSCRIPT
1
2. Elastic Earthquake Response Spectra
• Definition
CIE 619 Chapter 4 – Seismic Analysis
25
2. Elastic Earthquake Response Spectra
• Definition
There are different types of response spectra:
SD = |x| max = relative displacement response spectrum (spectral || max p p p ( p
displacement) SV = |x| max
= relative velocity response spectrum (spectral velocity)
SA = |x| max = relative acceleration response spectrum
SDa = |x + x| s max = absolute displacement response spectrum
SVa = |x + x| s max = absolute velocity response spectrum
SA = |x + x| s max = absolute acceleration response spectrum (spectral
acceleration)
CIE 619 Chapter 4 – Seismic Analysis
26
) The earthquake spectra that are most useful in earthquake engineering are SD, SV and SA.
2
2. Elastic Earthquake Response Spectra
• Definition
Northridge-Rinaldi
CIE 619 Chapter 4 – Seismic Analysis
27
2. Elastic Earthquake Response Spectra
• Properties of Response Spectra
Response spectra have the following properties : 1 they give the maximum response values of a SDOF system subjected to a given1. they give the maximum response values of a SDOF system subjected to a given
earthquake accelerogram; 2. they give the maximum response values in each mode of a MDOF system
subjected to a given earthquake accelerogram; This result will be discussedfurther in this chapter.
3. they indicate the frequency distribution of the seismic energy of a given
earthquake accelerogram, meaning that the response of a SDOF system is
CIE 619 Chapter 4 – Seismic Analysis
28
q g , g p yamplified when the seismic energy is close to its natural frequency.
3
2. Elastic Earthquake Response Spectra
• Exact Response SpectraThe relative displacement response spectrum is obtained directly by Duhamel’s integral given by equation 4.69 :
| d )-(t e )(x 1
-| = | x | = S d)-(t-
s
t
0dD maxmax sin
The acceleration and the relative velocity are as follows :
dt
dx(t) = (t)x
CIE 619 Chapter 4 – Seismic Analysis
29
dt
x(t)d = (t)x2
2
2. Elastic Earthquake Response Spectra
• Exact Response Spectra
By convolution, if a time function, F(t), is given by :
(t)
then its time derivative becomes :
d )(t, f = F(t)(t)u
(t)u
1
0
t) (t),u( fdt
(t)du - t) (t),u( f dt
(t)du + d t
)(t, f =
dt
dF(t)0
01
1(t)u
(t)u
1
0
CIE 619 Chapter 4 – Seismic Analysis
30
(t)u0
the above is known also as Leibnitz derivative of an integrated function
4
2. Elastic Earthquake Response Spectra
• Exact Response SpectraApplying convolution to Duhamel’s integral given by equation 4.69, we have :
)-(t e )(x 1
- = )(t, f d)-(t-
sd
sin
d )-(t e )(x
1- = x(t) d
)-(t -s
t
0d
sin
t = (t)u
0 = (t)u
1
0
The relative velocity is then :
d )-(t e )(x - = (t)x d)-(t-
s
t
0
cos
(4 100)
t) (t),u( fdt
(t)du - t) (t),u( f dt
(t)du + d t
)(t, f =
dt
dF(t)0
01
1(t)u
(t)u
1
0
CIE 619 Chapter 4 – Seismic Analysis
31
The relative velocity response spectrum is given by :
d )-(t e )(x -1
+ d)-(t-
s
t
02
sin
|(t)x | = SV max
(4.100)
2. Elastic Earthquake Response Spectra
• Exact Response SpectraSimilarly, the relative acceleration is obtained by differentiating equation 4.100 with respect to time :
(t)x - d )-(t e )(x - 1
)2 - (1 +
d )-(t e )(x 2 = (t)x
sd)-(t-
s
t
02
2
d)-(t-
t
0
sin
cos
(4.102)
CIE 619 Chapter 4 – Seismic Analysis
32
The absolute acceleration response spectrum is then :
| (t) x + (t)x | = S sA max
5
2. Elastic Earthquake Response Spectra
• Exact Response Spectra
CIE 619 Chapter 4 – Seismic Analysis
33
Datafile
2. Elastic Earthquake Response Spectra
• Pseudo Response Spectra
Usually, a civil engineering structure has low damping (lower than 20% critical). The following hypotheses can then be made :g yp
)(t- sin by replaced becan cos d
)-(t
0 ,
d
d
2
CIE 619 Chapter 4 – Seismic Analysis
34
6
2. Elastic Earthquake Response Spectra
• Pseudo Response SpectraWith these assumptions, equation 4.100 becomes:
x(t)=d)-(tex-(t)x d)-(t-
s
t
sin
d )-(t e )(x - = (t)x d)-(t-
s
t
0
cos (4.106)
The pseudo relative velocity response spectrum is then:
With the same assumptions, equation 4.102 is written:
( ))(ex( ) ds
0
S=S DV
2)(tt
d )-(t e )(x -1
+
d)-(t-
s
t
02
sin
d )-(t e )(x 2 = (t)x d)-(t-
t
0
cos
d )-(t e )(x 1
- = x(t) d)-(t -
s
t
0d
sin
CIE 619 Chapter 4 – Seismic Analysis
35
The pseudo absolute acceleration response spectrum becomes:
x(t) =d)-(texx+x 2d
)-(t-s
0
s sin
S = S = S VD2
A
(t)x - d )-(t e )(x - 1
)2 - (1 +
sd)-(t-
s
t
02
2
sin
(4.108)
2. Elastic Earthquake Response Spectra• Comparison Between Exact and
Pseudo Response Spectra– Comparing exact response spectra
(equations 4.100, 4.102) with pseudo response spectra (equations. 4.106, 4.108) for different accelerograms, yields the following tendencies:yields the following tendencies:
• in a system with zero damping, results are essentially identical for natural periods less than one second (T < 1 s);
• when damping increases to 20 % critical, differences are within 20 % but without any observable bias;
• pseudo acceleration response spectrum more precise than pseudo velocity response spectrum.
CIE 619 Chapter 4 – Seismic Analysis
36
– Variations within acceptable range expected from seismic analysis.
– Pseudo response spectra must not be used for highly damped systems ( > 20 % critical) or for systems with long natural periods (T >> 1 s).
7
2. Elastic Earthquake Response Spectra• Tripartite Representation
of Pseudo Response Spectra– In practice, response p , p
spectra represented by a graph with multiple logarithmic scales called a tripartite graph.
– Tripartite graph display on same curve the following information :
CIE 619 Chapter 4 – Seismic Analysis
37
information :• exact relative displacement
response spectrum;• pseudo relative velocity
response spectrum;• pseudo absolute acceleration
response spectrum.
2. Elastic Earthquake Response Spectra• Tripartite Representation of Pseudo Response Spectra
– To understand tripartite graph, consider variation of log10Sv with log10T for constant values of SA or SD.
a) SA = constant = C1 If the pseudo acceleration response spectrum is equal to a constant, C1, it can be written:
operating with the log10 on this equation, it yields:
S T
2 = S = S = C = S VDD
21A
CIE 619 Chapter 4 – Seismic Analysis
38
or
S + T - 2 = C V101010110 loglogloglog
2 - C + T = S 1011010V10 loglogloglog
8
2. Elastic Earthquake Response Spectra• Tripartite Representation of Pseudo Response Spectra
2 - C + T = S 1011010V10 loglogloglog
then
This result indicates that a line at + 45º on the tripartite graph represents a constant spectral acceleration, SA .
1 + =
T d
S d
10
V10
log
log
CIE 619 Chapter 4 – Seismic Analysis
39
2. Elastic Earthquake Response Spectra• Tripartite Representation of Pseudo Response Spectra
b) SD = constant = C2 If the relative displacement response spectrum is equal to a constant, C2, it can be p p p qwritten:
S 2
T = S = C = S V
V2D
operating with the log10 on this equation, it yields :
S + 2 - T = C V101010210 loglogloglog
CIE 619 Chapter 4 – Seismic Analysis
40
or
2 + C + T - = S 1021010V10 loglogloglog
9
2. Elastic Earthquake Response Spectra• Tripartite Representation of Pseudo Response Spectra
then
2 + C + T - = S 1021010V10 loglogloglog
then
This result indicates that a line at -45º on a tripartite graph represents a constant relative displacement spectrum, SD.
1- =
T d
S d
10
V10
log
log
CIE 619 Chapter 4 – Seismic Analysis
41
2. Elastic Earthquake Response Spectra• Tripartite Representation of Pseudo
Response Spectra– Figure illustrates, for different damping
values, response spectra of El Centro earthquake (1940 05 18, comp. S00E).
– Response spectrum of an earthquake er irreg larvery irregular.
– Spectrum has a general trapezoidal shape (shape of a tent) characteristic of earthquake response spectra and has the following physical explanation :
• for long natural periods, maximum relative displacement equal to maximum ground displacement and maximum absolute acceleration tends toward zero;
• for intermediate natural periods
CIE 619 Chapter 4 – Seismic Analysis
42
for intermediate natural periods, relative displacement, relative velocity and absolute acceleration amplified;
• for short natural periods, maximum absolute acceleration equal to maximum ground acceleration and maximum relative displacement tends toward zero.
10
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Motivation
• For practical seismic design of structures, simplified response spectra are used.
• Different regions of simplified spectra represented by straight lines.
• Position of these lines (amplitude) function of seismic hazard of the region.
• Many simplified design response spectra have been proposed.
CIE 619 Chapter 4 – Seismic Analysis
43
y p g p p p p
• Most common are described in the following sections.
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Housner’s Response Spectra (1959)
Relying on response spectra obtained for four historical earthquakes of Southern California (El Centro, 1934, M=6.5; El Centro, 1940, M=6.7 and Tehachapi, 1952, M=7.7) and one from Washington (Olympia, 1949, M=7.1)., G. Housner (1959) proposed, for the first time, an “average design spectrum”. This spectrum was calibrated for a maximum ground acceleration of 0,20g and for a probability of exceedence of 50 %, in other words, for the average of the historical spectral values. The values obtained from this spectrum are to be multiplied by a scale factor to take into account the seismic hazard of the region. For example, if the design earthquake of a given site is 0,15g, then the spectral acceleration will be:
CIE 619 Chapter 4 – Seismic Analysis
44
Housner of S of 20
15 equals A
S A
11
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Housner’s Response Spectra (1959)
CIE 619 Chapter 4 – Seismic Analysis
45
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Newmark and Hall’s Response Spectra (1969)
• Developed for nuclear industry
• Simplified spectra based on standard ground motion parameters:
– maximum ground acceleration : 0,50 g;
– maximum ground velocity : 61 cm/s (24 in/s);
– maximum ground displacement : 46 cm (18 in).
– Relying on the study of 28 earthquake records, values represent l i b diff d i i
CIE 619 Chapter 4 – Seismic Analysis
46
average relation between different ground seismic parameters.
– For a given site, values are scaled directly to the maximum design acceleration, which is function of seismic hazard of the region.
– Simplified spectrum obtained by multiplying each branch of ground parameters by an amplification factor which depends on damping coefficient of the structure.
12
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Newmark and Hall’s Response Spectra (1969)
CIE 619 Chapter 4 – Seismic Analysis
47
Note!
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Newmark and Hall’s Response Spectra (1969)
Table 4.2 Amplification factors for Newmark and Hall’s design response spectra (From Newmark et Hall, 1982).
Damping ratio
% of critical
Probability of exceedence
of 16 % (mean + 1 standard deviation)
Probability of exceedence of 50 %
(mean value)
SA
SV
SD
SA
SV
SD
0,5
5,10
3,84
3,04
3,68
2,59
2,01
1
4,38
3,38
2,73
3,21
2,31
1,82
2
3,66
2,92
2,42
2,74
2,03
1,63
3
3,24
2,64
2,24
2,46
1,86
1,52
5
2,71
2,30
2,01
2,12
1,65
1,39
CIE 619 Chapter 4 – Seismic Analysis
48
7 2,36 2,08 1,85 1,89 1,51 1,29
10
1,99
1,84
1,69
1,64
1,37
1,20
20
1,26
1,37
1,38
1,17
1,08
1,01
For the seismic design of nuclear plants, Newmark and Hall recommended the use of amplification factors corresponding to a probability of exceedence of 16 %.
13
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Newmark and Hall’s Response Spectra (1969)
• Procedure to plot Newmark’s simplified spectra – Step 1 - Plot of the ground motion parameters
» Limits of ground motion parameters linked by straight lines: maximum horizontal acceleration, maximum horizontal velocity and maximum horizontal displacement.
» If maximum horizontal acceleration is only known parameter at site, standard ground motion parameters can be used with maximum design acceleration, e.g. if maximum design
CIE 619 Chapter 4 – Seismic Analysis
49
acceleration of 0,33g, at site is only known parameter:
cm 30,36 = cm 46 0,50
0,33 = ntdisplaceme ground
cm/s 40,26 = cm/s 61 0,50
0,33 = velocityground
g 0,33 = g 0,50 0,50
0,33 = onaccelerati ground
2. Elastic Earthquake Response Spectra• Simplified Design Response
Spectra– Newmark and Hall’s
Response Spectra (1969)
Table 4.3 Recommended Damping Values.
Strain Level
Types of structures and conditions
% of Critical
Damping Response Spectra (1969)• Procedure to plot Newmark’s
simplified spectra – Step 2 - Plot different regions
of spectrum
» Amplification factors, shown in Table 4.2, used to plot different regions
welded steel, prestressed concrete, reinforced concrete with light cracking
2 to 3
reinforced concrete with heavy cracking
3 to 5
less than 50 % of the elastic limit
bolted or rivetted steel, nailed or bolted timber
5 to 7
welded steel, prestressed concrete without complete loss of prestressing
5 to 7
prestressed concrete with prestressing loss
7 to 10
CIE 619 Chapter 4 – Seismic Analysis
50
p gof simplified spectrum.
» Table 4.3 shows recommended damping values to be used.
prestressing loss 7 to 10 reinforced concrete
7 to 10
bolted or rivetted steel, bolted timber
10 to 15
close to or over the elastic limit
nailed timber
15 to 20
14
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Newmark and Hall’s Response Spectra (1969)
• Procedure to plot Newmark’s simplified spectra – Step 3 - Modification of spectral limits for high frequencies
– Find corner frequency, 1, which links velocity branch to acceleration branch.
– At frequency of about 41, start reducing linearly acceleration branch of spectrum until reaching limit of peak ground acceleration for a frequency of 101.
– Theoretically, displacement branch should also be modified for low
CIE 619 Chapter 4 – Seismic Analysis
51
y, pfrequencies (lower than 0.1 Hz). But, as low frequencies have little impact on Civil Engineering structures, modification can be omitted.
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
52
15
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
53
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
54
16
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
55
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
56
17
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
57
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
58
18
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
59
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
60
19
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Design Response Spectrum of ASCE 7-05
CIE 619 Chapter 4 – Seismic Analysis
61
2. Elastic Earthquake Response Spectra
• Simplified Design Response Spectra– Consider a seismic zone in Southern California on Site
Class B (rock)
H )f(g.
T
g.g.S
g.g.S
.FF
g.Sg;.S
D
Ds
va
s
33812060
20
60903
2
01513
2
01
9051
1
1
0.4
0.6
0.8
1
1.2
ctra
l Acc
eler
atio
n (
g)
ASCE 7-05 Design Spectrum
Newmark-Hall Spectrum, 5%damping, PGA=0.40 g
CIE 619 Chapter 4 – Seismic Analysis
62
Hz).f(orT
Hz).f(or.g.
g.T
Hz).f(or.g.
g.T
LL
os
oo
0830sec12
671sec60001
60
338sec12001
20
0
0.2
0 1 2 3 4 5Period (sec)
Sp
ec
1
2. Elastic Earthquake Response Spectra• Floor Response Spectra
– Response spectra, discussed in previous sections, used to determine maximum response of SDOF structure subjected to base motion.
– Similarly, maximum response of equipment, located in a building, can be obtained using response spectrum corresponding to the floor where the g p p p gequipment is located.
– Vibration of a complex building varies from storey to storey, creating, therefore, a variation in the response spectra of the various floors.
– Traditional technique used to generate a floor response spectrum is, first, to calculate historical horizontal acceleration of a floor and then use this accelerogram to construct a response spectrum.
– If a simplified design response spectrum of a floor is to be constructed, the procedure starts with an ensemble of accelerograms at the base and the
CIE 619 Chapter 4 – Seismic Analysis
64
procedure starts with an ensemble of accelerograms at the base and the resulting spectra are smoothened.
– Because of the large quantity of calculations required to generate a floor response spectrum, approximate methods have been proposed (Singh, 1975, Biggs and Roesset, 1970).
2. Elastic Earthquake Response Spectra
Generation of Floor Motion Ensembles
Generation of Floor Motion Ensembles
Floor Response Spectra
• Floor Response Spectra
DynamicAnalysis
0
0.2
0.4
0.6
0.8
1
1.2
0 1 2 3 4 5Period (sec)
Spe
ctra
l Acc
eler
atio
n (g
)
ASCE 7-05 Design Spectrum
Newmark-Hall Spectrum, 5%damping, PGA=0.40 g
0
0.2
0.4
0.6
0.8
1
1.2
0 1 2 3 4 5Period (sec)
Spe
ctra
l Acc
eler
atio
n (
g)
ASCE 7-05 Design Spectrum
Newmark-Hall Spectrum, 5%damping, PGA=0.40 g
CIE 619 Chapter 4 – Seismic Analysis
65
Ground Motion Ensembles (Ground Response Spectra)
Ground Motion EnsemblesGround Response Spectra
Building
0
0.2
0.4
0.6
0.8
1
1.2
0 1 2 3 4 5Period (sec)
Spe
ctra
l Acc
eler
atio
n (g
)
ASCE 7-05 Design Spectrum
Newmark-Hall Spectrum, 5%damping, PGA=0.40 g