Contact InfoT: 626-454-8300F: 626-454-8399LALighting.com

Headquaters10141 Olney StreetEl Monte, CA 91731Made in the USA REVISED: 03/17/2021

resourcesmounting hardwarePlease consult factory regarding any questions or inquires about mounting optionsNot all mounting hardware options are suitable for all fixtures.

CAT. NO FIXTURE SERIES

SOJ(Set of 4)

FHL310 FHL315 FHL320 FHL330 FHL340 FDH410FDH420 FDH430 FDH440 FPA510 FPA515 FPA520FPA530 FPA540 FBL220 FBL229 FHB100 FDC320

SWING-OUT JACKS• Compatible with selecte type of recessed flanged fixtures• Spring loaded adjustable mounting bracket for mounting in drywall or plaster type ceiling• Two (2) brackets on each side of fixture housing• Four (4) per fixture

CAT. NO FIXTURE SERIES X YHS-6_1/2 FFF106, FHL306, FWW206 51/8” 61/2”HS-10_1/2 FWW200 51/8” 101/2”HS-12 FCR210, FCR310, FCR710, FSE110 51/8” 12”HS-12_1/2 FHL310, FDH410, FPA510, FHB100, FIC100, FDC310 51/8” 121/2”HS-20 FHL315, FPA515 51/8” 20”

HS-24_1/2 FHL320, FDH420, FPA520, RER120, FCR220, FCR720, FSE120, FBL220/229, FIC/FIS120, FDC320 51/8” 241/2”

HS-36_1/2 FHL330, FDH430, FPA530, RER130 51/8” 361/2”HS-48_1/2 FHL340, FDH440, FPA540, RER140 51/8” 481/2”

HANGER YOKES• Compatible with all types of recessed flanged fixtures• 1/4” - 20 x 21/2” machine screws located into knockouts on back of fixture housings• Two (2) per fixture

43/8"

X

Y

CHAIN MOUNT COUPLING• Chain mount coupling with lift-up tabs for installation of V-Hooks when

chain mounted• Baked white enamel finish

CAT. NO. FIXTURE SERIESCMC-200 STR200, STR500, IND200, IND500, IND600CMC-240 STR240, IND240CMC-245 KDS200, KDI200, STR220, IND220CMC-300 STR300, IND300CMC-400 STR240, IND400CMC-MX210 MXSTR210, MXIND210CMC-INW1XX INW105, INW110CMC-STW100 STW100 (only for 4ft & 8ft fixtures)CMC-XXW200 STW200, INW200

12” 12” 12”

CMC-200/240/245/300/400

CMC-STW100CMC-INW1XX

CMC-MX210CMC-XXXW200

CAT. NO. FIXTURE SERIESCMC-200 STR200, STR500, IND200, IND500, IND600CMC-240 STR240, IND240, AGS240CMC-300 STR300, IND300CMC-400 STR240, IND400CMC-HB HBS100, HBW100, HBI600, HBI609CMC-IBT IBT100, IBT200, IBT300

CHANNEL HANGERS• Spaces fixture 11/2” from ceiling while allowing easy installation along gripper

grover of housing• Baked white enamel finish

Contact InfoT: 626-454-8300F: 626-454-8399LALighting.com

Headquaters10141 Olney StreetEl Monte, CA 91731Made in the USA REVISED: 03/17/2021

CEILING SPACERS• Minimum one (1) of each per fixture• May need to drill own holes

FIS-7• Feed-in spacer mounts to junction box, spaces fixture

11/2” from ceiling

CS-3• Closed spacer, spaces fixture 11/2” from ceiling

CANOPY SUSPENSION• Ball action joint provides a full circumferential 45° swivel action• Canopy bowls turn-lock onto bracket• Baked white enamel (other finishes available as specified)• Minimum one (1) of each per fixture

575 (Feed Version)• Includes

• Flash plate• Mounting bracket• Turn-lock canopy bowl• Ball action joint

565 (Non-Feed Version)• Includes

• Mounting bracket• Turn-lock canopy bowl• Ball action joint

Stem Length Calculation

A = Distance from ceiling to bottom of fixtureB = Stem lengthC = Height of fixture Stem Length B = A - C

AB

C

Canopy

STEM(Length)• 3/8” IPS, nominal OD 5/8”• Threaded 1” each end• 2 lock nuts provided per stem• Standard lengths: 6”, 12”, 18”, 24”, 30”, 36”, 48” • Baked white enamel finish

Note: other lengths & finishes are available as specified

433B• Blank canopy with cable• No power cord• Cable length 48" and 96"• Max. weight 196 lbs. per set

444F• Feed-in canopy with straight cord• Includes power cord• Cable length 48" and 96"• Max. weight 196 lbs per set

443B-48 W

48 - 48 inches96 - 96 inches

(Other lengths as specified)

444F-48SW-2CCOLOR

CABLE LENGTH

# OF CIRCUITSW - White B - Black

COLOR

2C - Two circuitsLV - 0-10V dimming

(Leave blank for one circuit)

W - WhiteB - BlackCORD TYPE

S - Straight cordCABLE LENGTH

48 - 48 inches96 - 96 inches

(Other lengths as specified)

CANOPY / CABLE SUSPENSION SYSTEM• Self-locking, one-step adjustable suspension device with canopies• Provides a full circumferential 360° swivel action

Note: Stem conduit is specified and sold as an additional line item

565 (Non-Feed Version)• Minimum stem length is 12”• Maximum weight is 50lbs per stem

575 (Feed Version)• Minimum stem length is 6”• Maximum weight is 20lbs per stem• Maximum weight is 50lbs per stem for lengths 12” and longer

Contact InfoT: 626-454-8300F: 626-454-8399LALighting.com

Headquaters10141 Olney StreetEl Monte, CA 91731Made in the USA REVISED: 03/17/2021

CS10V4CS10V6CS10

VTCS10 V-HOOK• Hooks install at end of fixture and

in “CMC” tabs between fixtures when chain mounted in rows

• Two (2) per fixtureSelf-locking device• Secures free end to ceiling

10' Cable Standard• One-end free, other end

secured within the fixture• 100lbs work load• 500lbs break load

V-Hook

Self-locking device• Secures free end to ceiling

10' Cable Standard• One-end free, other end

secured within the fixture• 100lbs work load• 500lbs break load

Fixture housing

Toggle Plates• Toggle plates through 3/8" passing holes and

anchored in the fixture housing

Y-TOGGLE-END / CABLE SUSPENSION SYSTEM

CAT. NO FOR FIXTURE SERIES

V4 4” LEG HEIGHT(100/200/240/500) Series

V6 6” LEG HEIGHT(300/400) Series

V-HOOK / CABLE SUSPENSION SYSTEM

ROTATABLE HOOK / CABLE MOUNTING SYSTEM• Hook / cable mounting system designed for single point hook mounting applications• Rotatable plate allows fixture to rotate for final adjustment• Ideal for retrofit project when round shaped HID fixtures are replaced by rectangular shaped fluorescent highbay

RHC-F36• Hook / cable system with fixed length cables

36” Cable, 4x• 36” cable standard• Toggle plates installed

on each end• Other lengths as

specified• 100lbs. work load• 500lbs. break load

Hook Assembly

Toggle Plates• Toggle plates through

3/8” passing-holes and anchored in fixture housing and the rotatable mtg. plate

RHC-A60/F12• Hook / cable system with adjustable length cables

60” Cable, 2x• 60” cable standard• One end free & the other

end with toggle plate installed

• Other lengths as specified• 100lbs. work load• 500lbs. break load

Hook Assembly

Toggle Plates• Toggle plates through

3/8” passing-holes and anchored in fixture housing and the rotatable mtg. plate

Self-locking device• Secures free end to ceiling

45° MOUNTING BRACKET45MB

• 45° mounting bracket designed for mounting lighting fixtures at 45° angle• Ideal for wall or ceiling mount applications• 18 ga. electro-galvanized steel• Baked white powder coated finish

Note: must drill own holes for 45° mounting bracket

411/32"

411/32"