residential feel outdoors - gima ziegel - cerpiano · outdoor innovation by gima! a clever ceramic...
TRANSCRIPT
OUTDOORSRESIDENTIAL FEEL
Outdoor innovation by GIMA! A clever ceramic floor system
composed of the most advanced benefits of a traditional,
natural material.
THE FIRST CERAMIC FLOOR SYSTEM FOR THE OUTDOOR AREA
WELCOME TO
2 CERPIANO+ FLOOR SYSTEM
THE LIVING ROOM
CERPIANO+ is new! Due to its superb material properties
CERPIANO+ offers a number of specific advantages:
• Extremely long life
• 100 % natural base material
• Absolute resistance to frost and weather
• UV resistance and colour fastness for life
• Scratch and break resistance
• Resistant to acids and alkalis
• Fade-resistant
An extremely high firing temperature and the quality of the base
material clay, are the ingredients for CERPIANO+. Thus are
created the ceramic floor plates in absolute clinker quality.
Due to its extreme ruggedness, CERPIANO+ is ideally suited
for terrace paving for the private sector and also the right solution
for roof terrace paving in commercial buildings.
In addition to frost protection and colour fastness, CERPIANO+
also stands for aesthetics and timeless elegance – a quality
product with an extremely long service life.
3 CERPIANO+ FLOOR SYSTEM
THE LIVING ROOM
LONG LIVETHE SUMMER
4 CERPIANO+ FLOOR SYSTEM
INNOVATIVE DESIGN IN A HOMELY ATMOSPHERE
Enhance outdoor areas noticeably! Elegant terrace design in private
gardens, aesthetically landscaped walkway structures in public or
domestic gardens, customised pool areas, uniform floor surfaces that
exude dignified luxury – CERPIANO+ is a material with versatile use.
Its vibrancy impresses in the truest sense of the word. On nice
summer days the ceramic structure of the terrace slabs absorbs
heat from the sun and in the evening evenly releases it back
into the environment. Perfect barefoot scenario!
5 CERPIANO+ FLOOR SYSTEM
HIGH QUALITY IN PERFECT DESIGN
CERPIANO+ is a combination of high quality and perfect design.
Unlike outdoor floor coverings – such as wood – the ceramic
material impresses through absolute weather resistance. It is
unbreakable and scratch resistant and thus offer the perfect
conditions for the designing of extremely durable terrace surfaces.
STYLISH AND
6 CERPIANO+ FLOOR SYSTEM
INDIVIDUAL
CRIMSON
grooved grooved grooved grooved smooth smooth smooth smooth
MAROON TITANIUM GREY VOLCANO GREY
7 CERPIANO+ FLOOR SYSTEM
8 CERPIANO+ FLOOR SYSTEM
TECHNICAL DATA
Manufacturer: Girnghuber GmbH Marklkofen
Designation: CERPIANO+
Colours: Volcano grey, titanium grey, crimson, maroon
Standard formats: 1,492 x 325 x 40 mm (0.48 m²) 742 x 325 x 40 mm (0.25 m²)
Surface: smooth | grooved
Joint width: 8 mm
Break resistance: T4, highest use class according to DIN EN 1344, resistant to acids and alkalis
Flexural strength: ≥ 5.2 kN at 75 cm or ≥ 11.8 kN at 37.5 cm Support distance (in accordance with DIN EN 538)
Abrasion resistance: Class A2 is fulfilled (in accordance with DIN EN 1344)
Frost resistance: Performance level 3 is fulfilled (in accordance with DIN EN 539-2 Method E: Single European test procedure)
Slip resistance of floor coverings according to BGR 181: Quality class R11
for slip resistance is met
9 CERPIANO+ FLOOR SYSTEM
Weight (dry): 65 kg/m², tolerance ± 15 %
Body bulk density: ≥ 2.0 kg/dm³ (in accordance with DIN EN 772-13)
Water absorption: ≤ 6 % (in accordance with DIN EN 539-2)
Thermal expansion coefficient*: WAK 20 to 100 °C = about 6 x 10-6 x K-1
(in accordance with DIN EN ISO 10545-8)
Fire behaviour: Class A1FL
(in accordance with DIN EN 1344)
Appearance and structure: The requirements according to DIN EN 1304,
Appendix B are met
Monitoring: Constant high quality is ensured by the continuous IHPC (in-house production control) as well as regular voluntary external monitoring in association with external test institutes.
* (At a temperature of 80 °C, a length alteration of approx. 0.5 mm is obtained for a plate length of 1 m)
Dimension differences according to GIMA data sheet
With CERPIANO+, we have developed
a product that impresses with
functionality, material aesthetics
and diversity of application alike.
Stylish mounts finish the edges of
the floor system neatly in technique
and craftsmanship.
Construction on point
foundations
• For the construction on grit.
• Customisation possible through
point foundation.
Adjustable terraces
• For the construction on concrete
slabs.
• Various construction options as
well asbuilding height differences
possible.
FORM FOLLOWS FUNCTION?
CERPIANO+ is available in the following standard formats:
• 1,492 × 325 × 40 mm (0.48 m2) | 742 × 325 × 40 mm (0.25 m2)
• For floor areas with individual dimensions differing from standard sizes are
ideally cut to any required format with the wet saw at the construction site.
10 CERPIANO+ FLOOR SYSTEM
WITH EDGING
TECHNICAL NOTE
CERPIANO+ is a product not regulated by the building authority.
For this reason, the dimensions of the pavement surface takes
place constructively, based on the manufacturer’s specifications or
by calculation. Terraces are usually not load-bearing constructions
with a maximum building height of 50 cm. The installation of
CERPIANO+ as a load-bearing component is not permitted.
FLOOR CONDITIONS
The construction of the floor system is easily possible for almost
all, even tricky foundations, such as gravel, stone, sand, grit and
other foundations. A substructure made of wood, however, is not
recommended as a base, because CERPIANO+ outlasts the lifetime
of organic materials many times over.
11 CERPIANO+ FLOOR SYSTEM
CONSTRUCTION ON POINT FOUNDATION –CROSS SECTION
CONSTRUCTION ON POINT FOUNDATION –LONGITUDINAL SECTION
ADJUSTABLE TERRACES BASE
CERPIANO+ 40 mm
RUBBER PADS 2 mm
ALUMINIUM RAIL 60 × 40 × 3 mm
HEIGHT-ADJUSTABLE TERRACE BASE OR PAD
CONCRETE SLAB ≥ 40 mm
ANTIFREEZE GRAVEL
CERPIANO+ 40 mm
RUBBER PADS 2 mm
ALUMINIUM RAIL 60 × 40 × 3 mm
HEIGHT-ADJUSTABLE TERRACE BASE OR PAD
FOUNDATION WITH INDIVIDUAL FOOTINGS ≥ 40 mm
ANTIFREEZE GRAVEL
CERPIANO+ 40 mm
RUBBER PADS 2 mm
ALUMINIUM RAIL 60 × 40 × 3 mm
HEIGHT-ADJUSTABLE TERRACE BASE OR PAD
FOUNDATION WITH INDIVIDUAL FOOTINGS ≥ 40 mm
ANTIFREEZE GRAVEL
EDGING8 mm
8 mm
8 mm
EDGING
CONCRETE WEDGE
CONCRETE WEDGE
FIRST STEP
SECOND STEP
• Now the aluminium substructure is mounted on the flat floor
surface. The aluminium profiles are propped up with terrace
pads or bases.
• The aluminium profiles must be designed with a
recommended centre distance of 37.5 cm.
• To prepare the floor surface, small unevennesses can be
compensated by underlaying another terrace pad.
• The aluminium profiles installed as mentioned above are
pasted up on the top with a self-adhesive rubber band.
This rubber overlay is used for the insulation of impact sound
and compensates for small tolerances of the brick plates.
INSTALLATION INSTRUCTIONS
First, a floor surface fit for installation must be prepared. The surface should be flat and an enclosed
surface must have a slope of 2 %, so that accumulating rainwater is able to drain.
12 CERPIANO+ FLOOR SYSTEM
THIRD STEP • Subsequently, the brick plates are placed. Depending on the
installation type, whether in the half bond or cross joint,
corresponding tile spacers are used to specify the correct
distance from each other.
• The brick plates can be easily cut with a wet saw or a standard
Flex (angle grinder) and can be easily adapted for slopes or
connection details.
FOURTH STEP
13 CERPIANO+ FLOOR SYSTEM
Dimensioning of each plate for assembly:
INSTALLATION PLAN
HALF BOND
CROSS BOND
14 CERPIANO+ FLOOR SYSTEM
For this reason, the floor system is also particularly suitable for paving in large commercial
areas, such as outdoor and entrance areas of business centres. High resistance, exceptional
hardness and extreme compactness make it suitable for use in areas that are highly stressed
and representative at the same time.
Consists of a whole and a half ceramic plate. The plates are laid alternately offset so that in one row the joint is broken and in the next row the joint is continued.
* Aluminium rails 60 × 40 × 3 mm may be stretched freely with a maximum centre distance of ≤ 50 cm.
Consists of equal sized ceramic plates. The joint runs continuously on both sides.
* Aluminium rails 60 × 40 × 3 mm may be stretched freely with a maximum centre distance of ≤ 50 cm.
CERPIANO+ STANDS FOR FEASIBILITY AND SUSTAINABILITY
CONSUMPTION VALUES HALF BOND
CONSUMPTION VALUES CROSS BOND
15 CERPIANO+ FLOOR SYSTEM
Surface area m²CERPIANO+
1,492 × 325 × 40 mmCERPIANO+
742 × 325 × 40 mm
Aluminium construction*
60 × 40 × 3 mm Rubber pad Tile spacer
10 15 pieces acc. to property 30 lm 30 lm 30 pieces
20 30 pieces acc. to property 60 lm 60 lm 60 pieces
25 37 pieces acc. to property 75 lm 75 lm 75 pieces
30 45 pieces acc. to property 90 lm 90 lm 90 pieces
35 52 pieces acc. to property 105 lm 105 lm 105 pieces
40 60 pieces acc. to property 120 lm 120 lm 120 pieces
45 67 pieces acc. to property 135 lm 135 lm 135 pieces
50 75 pieces acc. to property 150 lm 150 lm 150 pieces
Surface area m²CERPIANO+
1,492 × 325 × 40 mmCERPIANO+
742 × 325 × 40 mm
Aluminium construction*
60 × 40 × 3 mm Rubber pad Tile spacer
10 20 pieces - 30 lm 30 lm 20 pieces
20 40 pieces - 60 lm 60 lm 40 pieces
25 50 pieces - 75 lm 75 lm 50 pieces
30 60 pieces - 90 lm 90 lm 60 pieces
35 70 pieces - 105 lm 105 lm 70 pieces
40 80 pieces - 120 lm 120 lm 80 pieces
45 90 pieces - 135 lm 135 lm 90 pieces
50 100 pieces - 150 lm 150 lm 100 pieces
SET NEW OUTDOOR STANDARDS WITH CERPIANO+ IN HOTEL, SPA AND LEISURE SITES, AND SAVE LOTS OF COSTS IN THE LONG TERM
Whether it be a pool area, roof terrace or breakfast
veranda – pamper your guests with a flexible flooring
that exudes modern aesthetics and cleanliness. Based
on the excellent, high-quality materials of CERPIANO+,
you can create outdoors a continuous, spacious surface
with a timeless, luxurious shine. The first ceramic floor
system for the outdoor area can casually tuck away all
sorts of everyday stresses and environmental influences.
The CERPIANO+ with its high clinker quality is resistant
to UV rays as well as to acids and alkalis. This guarantees
longevity and long-term cost savings for maintenance
and decorative repairs. By using CERPIANO+ in hotels,
leisure sites and spas, you can create beautiful well-
feeling oases with extremely durable colour aesthetics,
produced from the natural material clay.
16 CERPIANO+ FLOOR SYSTEM
FLOOR COVERING FOR
WELL-FEELING OASIS
17 CERPIANO+ FLOOR SYSTEM
OUR CERAMIC PRODUCTS GET THEIR EXCELLENT QUALITY STRAIGHT FROM NATURE
18 CERPIANO+ FLOOR SYSTEM
QUALITYFROM CLAY
CERPIANO+ IS A PURE NATURAL PRODUCT
The ceramic material is made of 100 % genuine raw materials
and comes with absolutely no additives or artificial colours. Since
ceramic plates are dyed by nature, they neither stain nor fade.
HIGH QUALITY
The requirements on outdoor floor surfaces are very high. In
addition to the numerous rigours of everyday use, which interior
floors must also withstand, environmental factors such as sunlight,
wind, rain, cold and heat also act on the material outdoors.
19 CERPIANO+ FLOOR SYSTEM
Girnghuber GmbH
Ludwig-Girnghuber-Straße 1
84163 Marklkofen
Germany
T: +49 (0) 87 32 / 24 0
F: +49 (0) 87 32 / 24 20 0
www.gima-ziegel.de
www.cerpiano.com
GIM
-17-
016_
06/2
017_
EN